| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright © 2015 Intel Corporation. |
| * |
| * Authors: David Woodhouse <dwmw2@infradead.org> |
| */ |
| |
| #include <linux/intel-iommu.h> |
| #include <linux/mmu_notifier.h> |
| #include <linux/sched.h> |
| #include <linux/sched/mm.h> |
| #include <linux/slab.h> |
| #include <linux/intel-svm.h> |
| #include <linux/rculist.h> |
| #include <linux/pci.h> |
| #include <linux/pci-ats.h> |
| #include <linux/dmar.h> |
| #include <linux/interrupt.h> |
| #include <linux/mm_types.h> |
| #include <linux/ioasid.h> |
| #include <asm/page.h> |
| |
| #include "pasid.h" |
| |
| static irqreturn_t prq_event_thread(int irq, void *d); |
| static void intel_svm_drain_prq(struct device *dev, int pasid); |
| |
| #define PRQ_ORDER 0 |
| |
| int intel_svm_enable_prq(struct intel_iommu *iommu) |
| { |
| struct page *pages; |
| int irq, ret; |
| |
| pages = alloc_pages(GFP_KERNEL | __GFP_ZERO, PRQ_ORDER); |
| if (!pages) { |
| pr_warn("IOMMU: %s: Failed to allocate page request queue\n", |
| iommu->name); |
| return -ENOMEM; |
| } |
| iommu->prq = page_address(pages); |
| |
| irq = dmar_alloc_hwirq(DMAR_UNITS_SUPPORTED + iommu->seq_id, iommu->node, iommu); |
| if (irq <= 0) { |
| pr_err("IOMMU: %s: Failed to create IRQ vector for page request queue\n", |
| iommu->name); |
| ret = -EINVAL; |
| err: |
| free_pages((unsigned long)iommu->prq, PRQ_ORDER); |
| iommu->prq = NULL; |
| return ret; |
| } |
| iommu->pr_irq = irq; |
| |
| snprintf(iommu->prq_name, sizeof(iommu->prq_name), "dmar%d-prq", iommu->seq_id); |
| |
| ret = request_threaded_irq(irq, NULL, prq_event_thread, IRQF_ONESHOT, |
| iommu->prq_name, iommu); |
| if (ret) { |
| pr_err("IOMMU: %s: Failed to request IRQ for page request queue\n", |
| iommu->name); |
| dmar_free_hwirq(irq); |
| iommu->pr_irq = 0; |
| goto err; |
| } |
| dmar_writeq(iommu->reg + DMAR_PQH_REG, 0ULL); |
| dmar_writeq(iommu->reg + DMAR_PQT_REG, 0ULL); |
| dmar_writeq(iommu->reg + DMAR_PQA_REG, virt_to_phys(iommu->prq) | PRQ_ORDER); |
| |
| init_completion(&iommu->prq_complete); |
| |
| return 0; |
| } |
| |
| int intel_svm_finish_prq(struct intel_iommu *iommu) |
| { |
| dmar_writeq(iommu->reg + DMAR_PQH_REG, 0ULL); |
| dmar_writeq(iommu->reg + DMAR_PQT_REG, 0ULL); |
| dmar_writeq(iommu->reg + DMAR_PQA_REG, 0ULL); |
| |
| if (iommu->pr_irq) { |
| free_irq(iommu->pr_irq, iommu); |
| dmar_free_hwirq(iommu->pr_irq); |
| iommu->pr_irq = 0; |
| } |
| |
| free_pages((unsigned long)iommu->prq, PRQ_ORDER); |
| iommu->prq = NULL; |
| |
| return 0; |
| } |
| |
| static inline bool intel_svm_capable(struct intel_iommu *iommu) |
| { |
| return iommu->flags & VTD_FLAG_SVM_CAPABLE; |
| } |
| |
| void intel_svm_check(struct intel_iommu *iommu) |
| { |
| if (!pasid_supported(iommu)) |
| return; |
| |
| if (cpu_feature_enabled(X86_FEATURE_GBPAGES) && |
| !cap_fl1gp_support(iommu->cap)) { |
| pr_err("%s SVM disabled, incompatible 1GB page capability\n", |
| iommu->name); |
| return; |
| } |
| |
| if (cpu_feature_enabled(X86_FEATURE_LA57) && |
| !cap_5lp_support(iommu->cap)) { |
| pr_err("%s SVM disabled, incompatible paging mode\n", |
| iommu->name); |
| return; |
| } |
| |
| iommu->flags |= VTD_FLAG_SVM_CAPABLE; |
| } |
| |
| static void intel_flush_svm_range_dev (struct intel_svm *svm, struct intel_svm_dev *sdev, |
| unsigned long address, unsigned long pages, int ih) |
| { |
| struct qi_desc desc; |
| |
| if (pages == -1) { |
| desc.qw0 = QI_EIOTLB_PASID(svm->pasid) | |
| QI_EIOTLB_DID(sdev->did) | |
| QI_EIOTLB_GRAN(QI_GRAN_NONG_PASID) | |
| QI_EIOTLB_TYPE; |
| desc.qw1 = 0; |
| } else { |
| int mask = ilog2(__roundup_pow_of_two(pages)); |
| |
| desc.qw0 = QI_EIOTLB_PASID(svm->pasid) | |
| QI_EIOTLB_DID(sdev->did) | |
| QI_EIOTLB_GRAN(QI_GRAN_PSI_PASID) | |
| QI_EIOTLB_TYPE; |
| desc.qw1 = QI_EIOTLB_ADDR(address) | |
| QI_EIOTLB_IH(ih) | |
| QI_EIOTLB_AM(mask); |
| } |
| desc.qw2 = 0; |
| desc.qw3 = 0; |
| qi_submit_sync(svm->iommu, &desc, 1, 0); |
| |
| if (sdev->dev_iotlb) { |
| desc.qw0 = QI_DEV_EIOTLB_PASID(svm->pasid) | |
| QI_DEV_EIOTLB_SID(sdev->sid) | |
| QI_DEV_EIOTLB_QDEP(sdev->qdep) | |
| QI_DEIOTLB_TYPE; |
| if (pages == -1) { |
| desc.qw1 = QI_DEV_EIOTLB_ADDR(-1ULL >> 1) | |
| QI_DEV_EIOTLB_SIZE; |
| } else if (pages > 1) { |
| /* The least significant zero bit indicates the size. So, |
| * for example, an "address" value of 0x12345f000 will |
| * flush from 0x123440000 to 0x12347ffff (256KiB). */ |
| unsigned long last = address + ((unsigned long)(pages - 1) << VTD_PAGE_SHIFT); |
| unsigned long mask = __rounddown_pow_of_two(address ^ last); |
| |
| desc.qw1 = QI_DEV_EIOTLB_ADDR((address & ~mask) | |
| (mask - 1)) | QI_DEV_EIOTLB_SIZE; |
| } else { |
| desc.qw1 = QI_DEV_EIOTLB_ADDR(address); |
| } |
| desc.qw2 = 0; |
| desc.qw3 = 0; |
| qi_submit_sync(svm->iommu, &desc, 1, 0); |
| } |
| } |
| |
| static void intel_flush_svm_range(struct intel_svm *svm, unsigned long address, |
| unsigned long pages, int ih) |
| { |
| struct intel_svm_dev *sdev; |
| |
| rcu_read_lock(); |
| list_for_each_entry_rcu(sdev, &svm->devs, list) |
| intel_flush_svm_range_dev(svm, sdev, address, pages, ih); |
| rcu_read_unlock(); |
| } |
| |
| /* Pages have been freed at this point */ |
| static void intel_invalidate_range(struct mmu_notifier *mn, |
| struct mm_struct *mm, |
| unsigned long start, unsigned long end) |
| { |
| struct intel_svm *svm = container_of(mn, struct intel_svm, notifier); |
| |
| intel_flush_svm_range(svm, start, |
| (end - start + PAGE_SIZE - 1) >> VTD_PAGE_SHIFT, 0); |
| } |
| |
| static void intel_mm_release(struct mmu_notifier *mn, struct mm_struct *mm) |
| { |
| struct intel_svm *svm = container_of(mn, struct intel_svm, notifier); |
| struct intel_svm_dev *sdev; |
| |
| /* This might end up being called from exit_mmap(), *before* the page |
| * tables are cleared. And __mmu_notifier_release() will delete us from |
| * the list of notifiers so that our invalidate_range() callback doesn't |
| * get called when the page tables are cleared. So we need to protect |
| * against hardware accessing those page tables. |
| * |
| * We do it by clearing the entry in the PASID table and then flushing |
| * the IOTLB and the PASID table caches. This might upset hardware; |
| * perhaps we'll want to point the PASID to a dummy PGD (like the zero |
| * page) so that we end up taking a fault that the hardware really |
| * *has* to handle gracefully without affecting other processes. |
| */ |
| rcu_read_lock(); |
| list_for_each_entry_rcu(sdev, &svm->devs, list) |
| intel_pasid_tear_down_entry(svm->iommu, sdev->dev, |
| svm->pasid, true); |
| rcu_read_unlock(); |
| |
| } |
| |
| static const struct mmu_notifier_ops intel_mmuops = { |
| .release = intel_mm_release, |
| .invalidate_range = intel_invalidate_range, |
| }; |
| |
| static DEFINE_MUTEX(pasid_mutex); |
| static LIST_HEAD(global_svm_list); |
| |
| #define for_each_svm_dev(sdev, svm, d) \ |
| list_for_each_entry((sdev), &(svm)->devs, list) \ |
| if ((d) != (sdev)->dev) {} else |
| |
| static int pasid_to_svm_sdev(struct device *dev, unsigned int pasid, |
| struct intel_svm **rsvm, |
| struct intel_svm_dev **rsdev) |
| { |
| struct intel_svm_dev *d, *sdev = NULL; |
| struct intel_svm *svm; |
| |
| /* The caller should hold the pasid_mutex lock */ |
| if (WARN_ON(!mutex_is_locked(&pasid_mutex))) |
| return -EINVAL; |
| |
| if (pasid == INVALID_IOASID || pasid >= PASID_MAX) |
| return -EINVAL; |
| |
| svm = ioasid_find(NULL, pasid, NULL); |
| if (IS_ERR(svm)) |
| return PTR_ERR(svm); |
| |
| if (!svm) |
| goto out; |
| |
| /* |
| * If we found svm for the PASID, there must be at least one device |
| * bond. |
| */ |
| if (WARN_ON(list_empty(&svm->devs))) |
| return -EINVAL; |
| |
| rcu_read_lock(); |
| list_for_each_entry_rcu(d, &svm->devs, list) { |
| if (d->dev == dev) { |
| sdev = d; |
| break; |
| } |
| } |
| rcu_read_unlock(); |
| |
| out: |
| *rsvm = svm; |
| *rsdev = sdev; |
| |
| return 0; |
| } |
| |
| int intel_svm_bind_gpasid(struct iommu_domain *domain, struct device *dev, |
| struct iommu_gpasid_bind_data *data) |
| { |
| struct intel_iommu *iommu = device_to_iommu(dev, NULL, NULL); |
| struct intel_svm_dev *sdev = NULL; |
| struct dmar_domain *dmar_domain; |
| struct intel_svm *svm = NULL; |
| int ret = 0; |
| |
| if (WARN_ON(!iommu) || !data) |
| return -EINVAL; |
| |
| if (data->version != IOMMU_GPASID_BIND_VERSION_1 || |
| data->format != IOMMU_PASID_FORMAT_INTEL_VTD) |
| return -EINVAL; |
| |
| if (!dev_is_pci(dev)) |
| return -ENOTSUPP; |
| |
| /* VT-d supports devices with full 20 bit PASIDs only */ |
| if (pci_max_pasids(to_pci_dev(dev)) != PASID_MAX) |
| return -EINVAL; |
| |
| /* |
| * We only check host PASID range, we have no knowledge to check |
| * guest PASID range. |
| */ |
| if (data->hpasid <= 0 || data->hpasid >= PASID_MAX) |
| return -EINVAL; |
| |
| dmar_domain = to_dmar_domain(domain); |
| |
| mutex_lock(&pasid_mutex); |
| ret = pasid_to_svm_sdev(dev, data->hpasid, &svm, &sdev); |
| if (ret) |
| goto out; |
| |
| if (sdev) { |
| /* |
| * Do not allow multiple bindings of the same device-PASID since |
| * there is only one SL page tables per PASID. We may revisit |
| * once sharing PGD across domains are supported. |
| */ |
| dev_warn_ratelimited(dev, "Already bound with PASID %u\n", |
| svm->pasid); |
| ret = -EBUSY; |
| goto out; |
| } |
| |
| if (!svm) { |
| /* We come here when PASID has never been bond to a device. */ |
| svm = kzalloc(sizeof(*svm), GFP_KERNEL); |
| if (!svm) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| /* REVISIT: upper layer/VFIO can track host process that bind |
| * the PASID. ioasid_set = mm might be sufficient for vfio to |
| * check pasid VMM ownership. We can drop the following line |
| * once VFIO and IOASID set check is in place. |
| */ |
| svm->mm = get_task_mm(current); |
| svm->pasid = data->hpasid; |
| if (data->flags & IOMMU_SVA_GPASID_VAL) { |
| svm->gpasid = data->gpasid; |
| svm->flags |= SVM_FLAG_GUEST_PASID; |
| } |
| ioasid_set_data(data->hpasid, svm); |
| INIT_LIST_HEAD_RCU(&svm->devs); |
| mmput(svm->mm); |
| } |
| sdev = kzalloc(sizeof(*sdev), GFP_KERNEL); |
| if (!sdev) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| sdev->dev = dev; |
| |
| /* Only count users if device has aux domains */ |
| if (iommu_dev_feature_enabled(dev, IOMMU_DEV_FEAT_AUX)) |
| sdev->users = 1; |
| |
| /* Set up device context entry for PASID if not enabled already */ |
| ret = intel_iommu_enable_pasid(iommu, sdev->dev); |
| if (ret) { |
| dev_err_ratelimited(dev, "Failed to enable PASID capability\n"); |
| kfree(sdev); |
| goto out; |
| } |
| |
| /* |
| * PASID table is per device for better security. Therefore, for |
| * each bind of a new device even with an existing PASID, we need to |
| * call the nested mode setup function here. |
| */ |
| spin_lock(&iommu->lock); |
| ret = intel_pasid_setup_nested(iommu, dev, |
| (pgd_t *)(uintptr_t)data->gpgd, |
| data->hpasid, &data->vtd, dmar_domain, |
| data->addr_width); |
| spin_unlock(&iommu->lock); |
| if (ret) { |
| dev_err_ratelimited(dev, "Failed to set up PASID %llu in nested mode, Err %d\n", |
| data->hpasid, ret); |
| /* |
| * PASID entry should be in cleared state if nested mode |
| * set up failed. So we only need to clear IOASID tracking |
| * data such that free call will succeed. |
| */ |
| kfree(sdev); |
| goto out; |
| } |
| |
| svm->flags |= SVM_FLAG_GUEST_MODE; |
| |
| init_rcu_head(&sdev->rcu); |
| list_add_rcu(&sdev->list, &svm->devs); |
| out: |
| if (!IS_ERR_OR_NULL(svm) && list_empty(&svm->devs)) { |
| ioasid_set_data(data->hpasid, NULL); |
| kfree(svm); |
| } |
| |
| mutex_unlock(&pasid_mutex); |
| return ret; |
| } |
| |
| int intel_svm_unbind_gpasid(struct device *dev, int pasid) |
| { |
| struct intel_iommu *iommu = device_to_iommu(dev, NULL, NULL); |
| struct intel_svm_dev *sdev; |
| struct intel_svm *svm; |
| int ret; |
| |
| if (WARN_ON(!iommu)) |
| return -EINVAL; |
| |
| mutex_lock(&pasid_mutex); |
| ret = pasid_to_svm_sdev(dev, pasid, &svm, &sdev); |
| if (ret) |
| goto out; |
| |
| if (sdev) { |
| if (iommu_dev_feature_enabled(dev, IOMMU_DEV_FEAT_AUX)) |
| sdev->users--; |
| if (!sdev->users) { |
| list_del_rcu(&sdev->list); |
| intel_pasid_tear_down_entry(iommu, dev, |
| svm->pasid, false); |
| intel_svm_drain_prq(dev, svm->pasid); |
| kfree_rcu(sdev, rcu); |
| |
| if (list_empty(&svm->devs)) { |
| /* |
| * We do not free the IOASID here in that |
| * IOMMU driver did not allocate it. |
| * Unlike native SVM, IOASID for guest use was |
| * allocated prior to the bind call. |
| * In any case, if the free call comes before |
| * the unbind, IOMMU driver will get notified |
| * and perform cleanup. |
| */ |
| ioasid_set_data(pasid, NULL); |
| kfree(svm); |
| } |
| } |
| } |
| out: |
| mutex_unlock(&pasid_mutex); |
| return ret; |
| } |
| |
| /* Caller must hold pasid_mutex, mm reference */ |
| static int |
| intel_svm_bind_mm(struct device *dev, int flags, struct svm_dev_ops *ops, |
| struct mm_struct *mm, struct intel_svm_dev **sd) |
| { |
| struct intel_iommu *iommu = device_to_iommu(dev, NULL, NULL); |
| struct device_domain_info *info; |
| struct intel_svm_dev *sdev; |
| struct intel_svm *svm = NULL; |
| int pasid_max; |
| int ret; |
| |
| if (!iommu || dmar_disabled) |
| return -EINVAL; |
| |
| if (!intel_svm_capable(iommu)) |
| return -ENOTSUPP; |
| |
| if (dev_is_pci(dev)) { |
| pasid_max = pci_max_pasids(to_pci_dev(dev)); |
| if (pasid_max < 0) |
| return -EINVAL; |
| } else |
| pasid_max = 1 << 20; |
| |
| /* Bind supervisor PASID shuld have mm = NULL */ |
| if (flags & SVM_FLAG_SUPERVISOR_MODE) { |
| if (!ecap_srs(iommu->ecap) || mm) { |
| pr_err("Supervisor PASID with user provided mm.\n"); |
| return -EINVAL; |
| } |
| } |
| |
| if (!(flags & SVM_FLAG_PRIVATE_PASID)) { |
| struct intel_svm *t; |
| |
| list_for_each_entry(t, &global_svm_list, list) { |
| if (t->mm != mm || (t->flags & SVM_FLAG_PRIVATE_PASID)) |
| continue; |
| |
| svm = t; |
| if (svm->pasid >= pasid_max) { |
| dev_warn(dev, |
| "Limited PASID width. Cannot use existing PASID %d\n", |
| svm->pasid); |
| ret = -ENOSPC; |
| goto out; |
| } |
| |
| /* Find the matching device in svm list */ |
| for_each_svm_dev(sdev, svm, dev) { |
| if (sdev->ops != ops) { |
| ret = -EBUSY; |
| goto out; |
| } |
| sdev->users++; |
| goto success; |
| } |
| |
| break; |
| } |
| } |
| |
| sdev = kzalloc(sizeof(*sdev), GFP_KERNEL); |
| if (!sdev) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| sdev->dev = dev; |
| |
| ret = intel_iommu_enable_pasid(iommu, dev); |
| if (ret) { |
| kfree(sdev); |
| goto out; |
| } |
| |
| info = get_domain_info(dev); |
| sdev->did = FLPT_DEFAULT_DID; |
| sdev->sid = PCI_DEVID(info->bus, info->devfn); |
| if (info->ats_enabled) { |
| sdev->dev_iotlb = 1; |
| sdev->qdep = info->ats_qdep; |
| if (sdev->qdep >= QI_DEV_EIOTLB_MAX_INVS) |
| sdev->qdep = 0; |
| } |
| |
| /* Finish the setup now we know we're keeping it */ |
| sdev->users = 1; |
| sdev->ops = ops; |
| init_rcu_head(&sdev->rcu); |
| |
| if (!svm) { |
| svm = kzalloc(sizeof(*svm), GFP_KERNEL); |
| if (!svm) { |
| ret = -ENOMEM; |
| kfree(sdev); |
| goto out; |
| } |
| svm->iommu = iommu; |
| |
| if (pasid_max > intel_pasid_max_id) |
| pasid_max = intel_pasid_max_id; |
| |
| /* Do not use PASID 0, reserved for RID to PASID */ |
| svm->pasid = ioasid_alloc(NULL, PASID_MIN, |
| pasid_max - 1, svm); |
| if (svm->pasid == INVALID_IOASID) { |
| kfree(svm); |
| kfree(sdev); |
| ret = -ENOSPC; |
| goto out; |
| } |
| svm->notifier.ops = &intel_mmuops; |
| svm->mm = mm; |
| svm->flags = flags; |
| INIT_LIST_HEAD_RCU(&svm->devs); |
| INIT_LIST_HEAD(&svm->list); |
| ret = -ENOMEM; |
| if (mm) { |
| ret = mmu_notifier_register(&svm->notifier, mm); |
| if (ret) { |
| ioasid_free(svm->pasid); |
| kfree(svm); |
| kfree(sdev); |
| goto out; |
| } |
| } |
| |
| spin_lock(&iommu->lock); |
| ret = intel_pasid_setup_first_level(iommu, dev, |
| mm ? mm->pgd : init_mm.pgd, |
| svm->pasid, FLPT_DEFAULT_DID, |
| (mm ? 0 : PASID_FLAG_SUPERVISOR_MODE) | |
| (cpu_feature_enabled(X86_FEATURE_LA57) ? |
| PASID_FLAG_FL5LP : 0)); |
| spin_unlock(&iommu->lock); |
| if (ret) { |
| if (mm) |
| mmu_notifier_unregister(&svm->notifier, mm); |
| ioasid_free(svm->pasid); |
| kfree(svm); |
| kfree(sdev); |
| goto out; |
| } |
| |
| list_add_tail(&svm->list, &global_svm_list); |
| } else { |
| /* |
| * Binding a new device with existing PASID, need to setup |
| * the PASID entry. |
| */ |
| spin_lock(&iommu->lock); |
| ret = intel_pasid_setup_first_level(iommu, dev, |
| mm ? mm->pgd : init_mm.pgd, |
| svm->pasid, FLPT_DEFAULT_DID, |
| (mm ? 0 : PASID_FLAG_SUPERVISOR_MODE) | |
| (cpu_feature_enabled(X86_FEATURE_LA57) ? |
| PASID_FLAG_FL5LP : 0)); |
| spin_unlock(&iommu->lock); |
| if (ret) { |
| kfree(sdev); |
| goto out; |
| } |
| } |
| list_add_rcu(&sdev->list, &svm->devs); |
| success: |
| sdev->pasid = svm->pasid; |
| sdev->sva.dev = dev; |
| if (sd) |
| *sd = sdev; |
| ret = 0; |
| out: |
| return ret; |
| } |
| |
| /* Caller must hold pasid_mutex */ |
| static int intel_svm_unbind_mm(struct device *dev, int pasid) |
| { |
| struct intel_svm_dev *sdev; |
| struct intel_iommu *iommu; |
| struct intel_svm *svm; |
| int ret = -EINVAL; |
| |
| iommu = device_to_iommu(dev, NULL, NULL); |
| if (!iommu) |
| goto out; |
| |
| ret = pasid_to_svm_sdev(dev, pasid, &svm, &sdev); |
| if (ret) |
| goto out; |
| |
| if (sdev) { |
| sdev->users--; |
| if (!sdev->users) { |
| list_del_rcu(&sdev->list); |
| /* Flush the PASID cache and IOTLB for this device. |
| * Note that we do depend on the hardware *not* using |
| * the PASID any more. Just as we depend on other |
| * devices never using PASIDs that they have no right |
| * to use. We have a *shared* PASID table, because it's |
| * large and has to be physically contiguous. So it's |
| * hard to be as defensive as we might like. */ |
| intel_pasid_tear_down_entry(iommu, dev, |
| svm->pasid, false); |
| intel_svm_drain_prq(dev, svm->pasid); |
| kfree_rcu(sdev, rcu); |
| |
| if (list_empty(&svm->devs)) { |
| ioasid_free(svm->pasid); |
| if (svm->mm) |
| mmu_notifier_unregister(&svm->notifier, svm->mm); |
| list_del(&svm->list); |
| /* We mandate that no page faults may be outstanding |
| * for the PASID when intel_svm_unbind_mm() is called. |
| * If that is not obeyed, subtle errors will happen. |
| * Let's make them less subtle... */ |
| memset(svm, 0x6b, sizeof(*svm)); |
| kfree(svm); |
| } |
| } |
| } |
| out: |
| return ret; |
| } |
| |
| /* Page request queue descriptor */ |
| struct page_req_dsc { |
| union { |
| struct { |
| u64 type:8; |
| u64 pasid_present:1; |
| u64 priv_data_present:1; |
| u64 rsvd:6; |
| u64 rid:16; |
| u64 pasid:20; |
| u64 exe_req:1; |
| u64 pm_req:1; |
| u64 rsvd2:10; |
| }; |
| u64 qw_0; |
| }; |
| union { |
| struct { |
| u64 rd_req:1; |
| u64 wr_req:1; |
| u64 lpig:1; |
| u64 prg_index:9; |
| u64 addr:52; |
| }; |
| u64 qw_1; |
| }; |
| u64 priv_data[2]; |
| }; |
| |
| #define PRQ_RING_MASK ((0x1000 << PRQ_ORDER) - 0x20) |
| |
| static bool access_error(struct vm_area_struct *vma, struct page_req_dsc *req) |
| { |
| unsigned long requested = 0; |
| |
| if (req->exe_req) |
| requested |= VM_EXEC; |
| |
| if (req->rd_req) |
| requested |= VM_READ; |
| |
| if (req->wr_req) |
| requested |= VM_WRITE; |
| |
| return (requested & ~vma->vm_flags) != 0; |
| } |
| |
| static bool is_canonical_address(u64 addr) |
| { |
| int shift = 64 - (__VIRTUAL_MASK_SHIFT + 1); |
| long saddr = (long) addr; |
| |
| return (((saddr << shift) >> shift) == saddr); |
| } |
| |
| /** |
| * intel_svm_drain_prq - Drain page requests and responses for a pasid |
| * @dev: target device |
| * @pasid: pasid for draining |
| * |
| * Drain all pending page requests and responses related to @pasid in both |
| * software and hardware. This is supposed to be called after the device |
| * driver has stopped DMA, the pasid entry has been cleared, and both IOTLB |
| * and DevTLB have been invalidated. |
| * |
| * It waits until all pending page requests for @pasid in the page fault |
| * queue are completed by the prq handling thread. Then follow the steps |
| * described in VT-d spec CH7.10 to drain all page requests and page |
| * responses pending in the hardware. |
| */ |
| static void intel_svm_drain_prq(struct device *dev, int pasid) |
| { |
| struct device_domain_info *info; |
| struct dmar_domain *domain; |
| struct intel_iommu *iommu; |
| struct qi_desc desc[3]; |
| struct pci_dev *pdev; |
| int head, tail; |
| u16 sid, did; |
| int qdep; |
| |
| info = get_domain_info(dev); |
| if (WARN_ON(!info || !dev_is_pci(dev))) |
| return; |
| |
| if (!info->pri_enabled) |
| return; |
| |
| iommu = info->iommu; |
| domain = info->domain; |
| pdev = to_pci_dev(dev); |
| sid = PCI_DEVID(info->bus, info->devfn); |
| did = domain->iommu_did[iommu->seq_id]; |
| qdep = pci_ats_queue_depth(pdev); |
| |
| /* |
| * Check and wait until all pending page requests in the queue are |
| * handled by the prq handling thread. |
| */ |
| prq_retry: |
| reinit_completion(&iommu->prq_complete); |
| tail = dmar_readq(iommu->reg + DMAR_PQT_REG) & PRQ_RING_MASK; |
| head = dmar_readq(iommu->reg + DMAR_PQH_REG) & PRQ_RING_MASK; |
| while (head != tail) { |
| struct page_req_dsc *req; |
| |
| req = &iommu->prq[head / sizeof(*req)]; |
| if (!req->pasid_present || req->pasid != pasid) { |
| head = (head + sizeof(*req)) & PRQ_RING_MASK; |
| continue; |
| } |
| |
| wait_for_completion(&iommu->prq_complete); |
| goto prq_retry; |
| } |
| |
| /* |
| * Perform steps described in VT-d spec CH7.10 to drain page |
| * requests and responses in hardware. |
| */ |
| memset(desc, 0, sizeof(desc)); |
| desc[0].qw0 = QI_IWD_STATUS_DATA(QI_DONE) | |
| QI_IWD_FENCE | |
| QI_IWD_TYPE; |
| desc[1].qw0 = QI_EIOTLB_PASID(pasid) | |
| QI_EIOTLB_DID(did) | |
| QI_EIOTLB_GRAN(QI_GRAN_NONG_PASID) | |
| QI_EIOTLB_TYPE; |
| desc[2].qw0 = QI_DEV_EIOTLB_PASID(pasid) | |
| QI_DEV_EIOTLB_SID(sid) | |
| QI_DEV_EIOTLB_QDEP(qdep) | |
| QI_DEIOTLB_TYPE | |
| QI_DEV_IOTLB_PFSID(info->pfsid); |
| qi_retry: |
| reinit_completion(&iommu->prq_complete); |
| qi_submit_sync(iommu, desc, 3, QI_OPT_WAIT_DRAIN); |
| if (readl(iommu->reg + DMAR_PRS_REG) & DMA_PRS_PRO) { |
| wait_for_completion(&iommu->prq_complete); |
| goto qi_retry; |
| } |
| } |
| |
| static int prq_to_iommu_prot(struct page_req_dsc *req) |
| { |
| int prot = 0; |
| |
| if (req->rd_req) |
| prot |= IOMMU_FAULT_PERM_READ; |
| if (req->wr_req) |
| prot |= IOMMU_FAULT_PERM_WRITE; |
| if (req->exe_req) |
| prot |= IOMMU_FAULT_PERM_EXEC; |
| if (req->pm_req) |
| prot |= IOMMU_FAULT_PERM_PRIV; |
| |
| return prot; |
| } |
| |
| static int |
| intel_svm_prq_report(struct device *dev, struct page_req_dsc *desc) |
| { |
| struct iommu_fault_event event; |
| |
| if (!dev || !dev_is_pci(dev)) |
| return -ENODEV; |
| |
| /* Fill in event data for device specific processing */ |
| memset(&event, 0, sizeof(struct iommu_fault_event)); |
| event.fault.type = IOMMU_FAULT_PAGE_REQ; |
| event.fault.prm.addr = desc->addr; |
| event.fault.prm.pasid = desc->pasid; |
| event.fault.prm.grpid = desc->prg_index; |
| event.fault.prm.perm = prq_to_iommu_prot(desc); |
| |
| if (desc->lpig) |
| event.fault.prm.flags |= IOMMU_FAULT_PAGE_REQUEST_LAST_PAGE; |
| if (desc->pasid_present) { |
| event.fault.prm.flags |= IOMMU_FAULT_PAGE_REQUEST_PASID_VALID; |
| event.fault.prm.flags |= IOMMU_FAULT_PAGE_RESPONSE_NEEDS_PASID; |
| } |
| if (desc->priv_data_present) { |
| /* |
| * Set last page in group bit if private data is present, |
| * page response is required as it does for LPIG. |
| * iommu_report_device_fault() doesn't understand this vendor |
| * specific requirement thus we set last_page as a workaround. |
| */ |
| event.fault.prm.flags |= IOMMU_FAULT_PAGE_REQUEST_LAST_PAGE; |
| event.fault.prm.flags |= IOMMU_FAULT_PAGE_REQUEST_PRIV_DATA; |
| memcpy(event.fault.prm.private_data, desc->priv_data, |
| sizeof(desc->priv_data)); |
| } |
| |
| return iommu_report_device_fault(dev, &event); |
| } |
| |
| static irqreturn_t prq_event_thread(int irq, void *d) |
| { |
| struct intel_svm_dev *sdev = NULL; |
| struct intel_iommu *iommu = d; |
| struct intel_svm *svm = NULL; |
| int head, tail, handled = 0; |
| |
| /* Clear PPR bit before reading head/tail registers, to |
| * ensure that we get a new interrupt if needed. */ |
| writel(DMA_PRS_PPR, iommu->reg + DMAR_PRS_REG); |
| |
| tail = dmar_readq(iommu->reg + DMAR_PQT_REG) & PRQ_RING_MASK; |
| head = dmar_readq(iommu->reg + DMAR_PQH_REG) & PRQ_RING_MASK; |
| while (head != tail) { |
| struct vm_area_struct *vma; |
| struct page_req_dsc *req; |
| struct qi_desc resp; |
| int result; |
| vm_fault_t ret; |
| u64 address; |
| |
| handled = 1; |
| |
| req = &iommu->prq[head / sizeof(*req)]; |
| |
| result = QI_RESP_FAILURE; |
| address = (u64)req->addr << VTD_PAGE_SHIFT; |
| if (!req->pasid_present) { |
| pr_err("%s: Page request without PASID: %08llx %08llx\n", |
| iommu->name, ((unsigned long long *)req)[0], |
| ((unsigned long long *)req)[1]); |
| goto no_pasid; |
| } |
| |
| if (!svm || svm->pasid != req->pasid) { |
| rcu_read_lock(); |
| svm = ioasid_find(NULL, req->pasid, NULL); |
| /* It *can't* go away, because the driver is not permitted |
| * to unbind the mm while any page faults are outstanding. |
| * So we only need RCU to protect the internal idr code. */ |
| rcu_read_unlock(); |
| if (IS_ERR_OR_NULL(svm)) { |
| pr_err("%s: Page request for invalid PASID %d: %08llx %08llx\n", |
| iommu->name, req->pasid, ((unsigned long long *)req)[0], |
| ((unsigned long long *)req)[1]); |
| goto no_pasid; |
| } |
| } |
| |
| if (!sdev || sdev->sid != req->rid) { |
| struct intel_svm_dev *t; |
| |
| sdev = NULL; |
| rcu_read_lock(); |
| list_for_each_entry_rcu(t, &svm->devs, list) { |
| if (t->sid == req->rid) { |
| sdev = t; |
| break; |
| } |
| } |
| rcu_read_unlock(); |
| } |
| |
| result = QI_RESP_INVALID; |
| /* Since we're using init_mm.pgd directly, we should never take |
| * any faults on kernel addresses. */ |
| if (!svm->mm) |
| goto bad_req; |
| |
| /* If address is not canonical, return invalid response */ |
| if (!is_canonical_address(address)) |
| goto bad_req; |
| |
| /* |
| * If prq is to be handled outside iommu driver via receiver of |
| * the fault notifiers, we skip the page response here. |
| */ |
| if (svm->flags & SVM_FLAG_GUEST_MODE) { |
| if (sdev && !intel_svm_prq_report(sdev->dev, req)) |
| goto prq_advance; |
| else |
| goto bad_req; |
| } |
| |
| /* If the mm is already defunct, don't handle faults. */ |
| if (!mmget_not_zero(svm->mm)) |
| goto bad_req; |
| |
| mmap_read_lock(svm->mm); |
| vma = find_extend_vma(svm->mm, address); |
| if (!vma || address < vma->vm_start) |
| goto invalid; |
| |
| if (access_error(vma, req)) |
| goto invalid; |
| |
| ret = handle_mm_fault(vma, address, |
| req->wr_req ? FAULT_FLAG_WRITE : 0); |
| if (ret & VM_FAULT_ERROR) |
| goto invalid; |
| |
| result = QI_RESP_SUCCESS; |
| invalid: |
| mmap_read_unlock(svm->mm); |
| mmput(svm->mm); |
| bad_req: |
| WARN_ON(!sdev); |
| if (sdev && sdev->ops && sdev->ops->fault_cb) { |
| int rwxp = (req->rd_req << 3) | (req->wr_req << 2) | |
| (req->exe_req << 1) | (req->pm_req); |
| sdev->ops->fault_cb(sdev->dev, req->pasid, req->addr, |
| req->priv_data, rwxp, result); |
| } |
| /* We get here in the error case where the PASID lookup failed, |
| and these can be NULL. Do not use them below this point! */ |
| sdev = NULL; |
| svm = NULL; |
| no_pasid: |
| if (req->lpig || req->priv_data_present) { |
| /* |
| * Per VT-d spec. v3.0 ch7.7, system software must |
| * respond with page group response if private data |
| * is present (PDP) or last page in group (LPIG) bit |
| * is set. This is an additional VT-d feature beyond |
| * PCI ATS spec. |
| */ |
| resp.qw0 = QI_PGRP_PASID(req->pasid) | |
| QI_PGRP_DID(req->rid) | |
| QI_PGRP_PASID_P(req->pasid_present) | |
| QI_PGRP_PDP(req->pasid_present) | |
| QI_PGRP_RESP_CODE(result) | |
| QI_PGRP_RESP_TYPE; |
| resp.qw1 = QI_PGRP_IDX(req->prg_index) | |
| QI_PGRP_LPIG(req->lpig); |
| |
| if (req->priv_data_present) |
| memcpy(&resp.qw2, req->priv_data, |
| sizeof(req->priv_data)); |
| resp.qw2 = 0; |
| resp.qw3 = 0; |
| qi_submit_sync(iommu, &resp, 1, 0); |
| } |
| prq_advance: |
| head = (head + sizeof(*req)) & PRQ_RING_MASK; |
| } |
| |
| dmar_writeq(iommu->reg + DMAR_PQH_REG, tail); |
| |
| /* |
| * Clear the page request overflow bit and wake up all threads that |
| * are waiting for the completion of this handling. |
| */ |
| if (readl(iommu->reg + DMAR_PRS_REG) & DMA_PRS_PRO) |
| writel(DMA_PRS_PRO, iommu->reg + DMAR_PRS_REG); |
| |
| if (!completion_done(&iommu->prq_complete)) |
| complete(&iommu->prq_complete); |
| |
| return IRQ_RETVAL(handled); |
| } |
| |
| #define to_intel_svm_dev(handle) container_of(handle, struct intel_svm_dev, sva) |
| struct iommu_sva * |
| intel_svm_bind(struct device *dev, struct mm_struct *mm, void *drvdata) |
| { |
| struct iommu_sva *sva = ERR_PTR(-EINVAL); |
| struct intel_svm_dev *sdev = NULL; |
| int flags = 0; |
| int ret; |
| |
| /* |
| * TODO: Consolidate with generic iommu-sva bind after it is merged. |
| * It will require shared SVM data structures, i.e. combine io_mm |
| * and intel_svm etc. |
| */ |
| if (drvdata) |
| flags = *(int *)drvdata; |
| mutex_lock(&pasid_mutex); |
| ret = intel_svm_bind_mm(dev, flags, NULL, mm, &sdev); |
| if (ret) |
| sva = ERR_PTR(ret); |
| else if (sdev) |
| sva = &sdev->sva; |
| else |
| WARN(!sdev, "SVM bind succeeded with no sdev!\n"); |
| |
| mutex_unlock(&pasid_mutex); |
| |
| return sva; |
| } |
| |
| void intel_svm_unbind(struct iommu_sva *sva) |
| { |
| struct intel_svm_dev *sdev; |
| |
| mutex_lock(&pasid_mutex); |
| sdev = to_intel_svm_dev(sva); |
| intel_svm_unbind_mm(sdev->dev, sdev->pasid); |
| mutex_unlock(&pasid_mutex); |
| } |
| |
| int intel_svm_get_pasid(struct iommu_sva *sva) |
| { |
| struct intel_svm_dev *sdev; |
| int pasid; |
| |
| mutex_lock(&pasid_mutex); |
| sdev = to_intel_svm_dev(sva); |
| pasid = sdev->pasid; |
| mutex_unlock(&pasid_mutex); |
| |
| return pasid; |
| } |
| |
| int intel_svm_page_response(struct device *dev, |
| struct iommu_fault_event *evt, |
| struct iommu_page_response *msg) |
| { |
| struct iommu_fault_page_request *prm; |
| struct intel_svm_dev *sdev = NULL; |
| struct intel_svm *svm = NULL; |
| struct intel_iommu *iommu; |
| bool private_present; |
| bool pasid_present; |
| bool last_page; |
| u8 bus, devfn; |
| int ret = 0; |
| u16 sid; |
| |
| if (!dev || !dev_is_pci(dev)) |
| return -ENODEV; |
| |
| iommu = device_to_iommu(dev, &bus, &devfn); |
| if (!iommu) |
| return -ENODEV; |
| |
| if (!msg || !evt) |
| return -EINVAL; |
| |
| mutex_lock(&pasid_mutex); |
| |
| prm = &evt->fault.prm; |
| sid = PCI_DEVID(bus, devfn); |
| pasid_present = prm->flags & IOMMU_FAULT_PAGE_REQUEST_PASID_VALID; |
| private_present = prm->flags & IOMMU_FAULT_PAGE_REQUEST_PRIV_DATA; |
| last_page = prm->flags & IOMMU_FAULT_PAGE_REQUEST_LAST_PAGE; |
| |
| if (!pasid_present) { |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| if (prm->pasid == 0 || prm->pasid >= PASID_MAX) { |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| ret = pasid_to_svm_sdev(dev, prm->pasid, &svm, &sdev); |
| if (ret || !sdev) { |
| ret = -ENODEV; |
| goto out; |
| } |
| |
| /* |
| * For responses from userspace, need to make sure that the |
| * pasid has been bound to its mm. |
| */ |
| if (svm->flags & SVM_FLAG_GUEST_MODE) { |
| struct mm_struct *mm; |
| |
| mm = get_task_mm(current); |
| if (!mm) { |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| if (mm != svm->mm) { |
| ret = -ENODEV; |
| mmput(mm); |
| goto out; |
| } |
| |
| mmput(mm); |
| } |
| |
| /* |
| * Per VT-d spec. v3.0 ch7.7, system software must respond |
| * with page group response if private data is present (PDP) |
| * or last page in group (LPIG) bit is set. This is an |
| * additional VT-d requirement beyond PCI ATS spec. |
| */ |
| if (last_page || private_present) { |
| struct qi_desc desc; |
| |
| desc.qw0 = QI_PGRP_PASID(prm->pasid) | QI_PGRP_DID(sid) | |
| QI_PGRP_PASID_P(pasid_present) | |
| QI_PGRP_PDP(private_present) | |
| QI_PGRP_RESP_CODE(msg->code) | |
| QI_PGRP_RESP_TYPE; |
| desc.qw1 = QI_PGRP_IDX(prm->grpid) | QI_PGRP_LPIG(last_page); |
| desc.qw2 = 0; |
| desc.qw3 = 0; |
| if (private_present) |
| memcpy(&desc.qw2, prm->private_data, |
| sizeof(prm->private_data)); |
| |
| qi_submit_sync(iommu, &desc, 1, 0); |
| } |
| out: |
| mutex_unlock(&pasid_mutex); |
| return ret; |
| } |