| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Generic HDLC support routines for Linux |
| * X.25 support |
| * |
| * Copyright (C) 1999 - 2006 Krzysztof Halasa <khc@pm.waw.pl> |
| */ |
| |
| #include <linux/errno.h> |
| #include <linux/gfp.h> |
| #include <linux/hdlc.h> |
| #include <linux/if_arp.h> |
| #include <linux/inetdevice.h> |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/lapb.h> |
| #include <linux/module.h> |
| #include <linux/pkt_sched.h> |
| #include <linux/poll.h> |
| #include <linux/rtnetlink.h> |
| #include <linux/skbuff.h> |
| #include <net/x25device.h> |
| |
| struct x25_state { |
| x25_hdlc_proto settings; |
| }; |
| |
| static int x25_ioctl(struct net_device *dev, struct ifreq *ifr); |
| |
| static struct x25_state *state(hdlc_device *hdlc) |
| { |
| return hdlc->state; |
| } |
| |
| /* These functions are callbacks called by LAPB layer */ |
| |
| static void x25_connect_disconnect(struct net_device *dev, int reason, int code) |
| { |
| struct sk_buff *skb; |
| unsigned char *ptr; |
| |
| if ((skb = dev_alloc_skb(1)) == NULL) { |
| netdev_err(dev, "out of memory\n"); |
| return; |
| } |
| |
| ptr = skb_put(skb, 1); |
| *ptr = code; |
| |
| skb->protocol = x25_type_trans(skb, dev); |
| netif_rx(skb); |
| } |
| |
| |
| |
| static void x25_connected(struct net_device *dev, int reason) |
| { |
| x25_connect_disconnect(dev, reason, X25_IFACE_CONNECT); |
| } |
| |
| |
| |
| static void x25_disconnected(struct net_device *dev, int reason) |
| { |
| x25_connect_disconnect(dev, reason, X25_IFACE_DISCONNECT); |
| } |
| |
| |
| |
| static int x25_data_indication(struct net_device *dev, struct sk_buff *skb) |
| { |
| unsigned char *ptr; |
| |
| if (skb_cow(skb, 1)) { |
| kfree_skb(skb); |
| return NET_RX_DROP; |
| } |
| |
| skb_push(skb, 1); |
| skb_reset_network_header(skb); |
| |
| ptr = skb->data; |
| *ptr = X25_IFACE_DATA; |
| |
| skb->protocol = x25_type_trans(skb, dev); |
| return netif_rx(skb); |
| } |
| |
| |
| |
| static void x25_data_transmit(struct net_device *dev, struct sk_buff *skb) |
| { |
| hdlc_device *hdlc = dev_to_hdlc(dev); |
| |
| skb_reset_network_header(skb); |
| skb->protocol = hdlc_type_trans(skb, dev); |
| |
| if (dev_nit_active(dev)) |
| dev_queue_xmit_nit(skb, dev); |
| |
| hdlc->xmit(skb, dev); /* Ignore return value :-( */ |
| } |
| |
| |
| |
| static netdev_tx_t x25_xmit(struct sk_buff *skb, struct net_device *dev) |
| { |
| int result; |
| |
| |
| /* X.25 to LAPB */ |
| switch (skb->data[0]) { |
| case X25_IFACE_DATA: /* Data to be transmitted */ |
| skb_pull(skb, 1); |
| skb_reset_network_header(skb); |
| if ((result = lapb_data_request(dev, skb)) != LAPB_OK) |
| dev_kfree_skb(skb); |
| return NETDEV_TX_OK; |
| |
| case X25_IFACE_CONNECT: |
| if ((result = lapb_connect_request(dev))!= LAPB_OK) { |
| if (result == LAPB_CONNECTED) |
| /* Send connect confirm. msg to level 3 */ |
| x25_connected(dev, 0); |
| else |
| netdev_err(dev, "LAPB connect request failed, error code = %i\n", |
| result); |
| } |
| break; |
| |
| case X25_IFACE_DISCONNECT: |
| if ((result = lapb_disconnect_request(dev)) != LAPB_OK) { |
| if (result == LAPB_NOTCONNECTED) |
| /* Send disconnect confirm. msg to level 3 */ |
| x25_disconnected(dev, 0); |
| else |
| netdev_err(dev, "LAPB disconnect request failed, error code = %i\n", |
| result); |
| } |
| break; |
| |
| default: /* to be defined */ |
| break; |
| } |
| |
| dev_kfree_skb(skb); |
| return NETDEV_TX_OK; |
| } |
| |
| |
| |
| static int x25_open(struct net_device *dev) |
| { |
| static const struct lapb_register_struct cb = { |
| .connect_confirmation = x25_connected, |
| .connect_indication = x25_connected, |
| .disconnect_confirmation = x25_disconnected, |
| .disconnect_indication = x25_disconnected, |
| .data_indication = x25_data_indication, |
| .data_transmit = x25_data_transmit, |
| }; |
| hdlc_device *hdlc = dev_to_hdlc(dev); |
| struct lapb_parms_struct params; |
| int result; |
| |
| result = lapb_register(dev, &cb); |
| if (result != LAPB_OK) |
| return result; |
| |
| result = lapb_getparms(dev, ¶ms); |
| if (result != LAPB_OK) |
| return result; |
| |
| if (state(hdlc)->settings.dce) |
| params.mode = params.mode | LAPB_DCE; |
| |
| if (state(hdlc)->settings.modulo == 128) |
| params.mode = params.mode | LAPB_EXTENDED; |
| |
| params.window = state(hdlc)->settings.window; |
| params.t1 = state(hdlc)->settings.t1; |
| params.t2 = state(hdlc)->settings.t2; |
| params.n2 = state(hdlc)->settings.n2; |
| |
| result = lapb_setparms(dev, ¶ms); |
| if (result != LAPB_OK) |
| return result; |
| |
| return 0; |
| } |
| |
| |
| |
| static void x25_close(struct net_device *dev) |
| { |
| lapb_unregister(dev); |
| } |
| |
| |
| |
| static int x25_rx(struct sk_buff *skb) |
| { |
| struct net_device *dev = skb->dev; |
| |
| if ((skb = skb_share_check(skb, GFP_ATOMIC)) == NULL) { |
| dev->stats.rx_dropped++; |
| return NET_RX_DROP; |
| } |
| |
| if (lapb_data_received(dev, skb) == LAPB_OK) |
| return NET_RX_SUCCESS; |
| |
| dev->stats.rx_errors++; |
| dev_kfree_skb_any(skb); |
| return NET_RX_DROP; |
| } |
| |
| |
| static struct hdlc_proto proto = { |
| .open = x25_open, |
| .close = x25_close, |
| .ioctl = x25_ioctl, |
| .netif_rx = x25_rx, |
| .xmit = x25_xmit, |
| .module = THIS_MODULE, |
| }; |
| |
| |
| static int x25_ioctl(struct net_device *dev, struct ifreq *ifr) |
| { |
| x25_hdlc_proto __user *x25_s = ifr->ifr_settings.ifs_ifsu.x25; |
| const size_t size = sizeof(x25_hdlc_proto); |
| hdlc_device *hdlc = dev_to_hdlc(dev); |
| x25_hdlc_proto new_settings; |
| int result; |
| |
| switch (ifr->ifr_settings.type) { |
| case IF_GET_PROTO: |
| if (dev_to_hdlc(dev)->proto != &proto) |
| return -EINVAL; |
| ifr->ifr_settings.type = IF_PROTO_X25; |
| if (ifr->ifr_settings.size < size) { |
| ifr->ifr_settings.size = size; /* data size wanted */ |
| return -ENOBUFS; |
| } |
| if (copy_to_user(x25_s, &state(hdlc)->settings, size)) |
| return -EFAULT; |
| return 0; |
| |
| case IF_PROTO_X25: |
| if (!capable(CAP_NET_ADMIN)) |
| return -EPERM; |
| |
| if (dev->flags & IFF_UP) |
| return -EBUSY; |
| |
| /* backward compatibility */ |
| if (ifr->ifr_settings.size == 0) { |
| new_settings.dce = 0; |
| new_settings.modulo = 8; |
| new_settings.window = 7; |
| new_settings.t1 = 3; |
| new_settings.t2 = 1; |
| new_settings.n2 = 10; |
| } |
| else { |
| if (copy_from_user(&new_settings, x25_s, size)) |
| return -EFAULT; |
| |
| if ((new_settings.dce != 0 && |
| new_settings.dce != 1) || |
| (new_settings.modulo != 8 && |
| new_settings.modulo != 128) || |
| new_settings.window < 1 || |
| (new_settings.modulo == 8 && |
| new_settings.window > 7) || |
| (new_settings.modulo == 128 && |
| new_settings.window > 127) || |
| new_settings.t1 < 1 || |
| new_settings.t1 > 255 || |
| new_settings.t2 < 1 || |
| new_settings.t2 > 255 || |
| new_settings.n2 < 1 || |
| new_settings.n2 > 255) |
| return -EINVAL; |
| } |
| |
| result=hdlc->attach(dev, ENCODING_NRZ,PARITY_CRC16_PR1_CCITT); |
| if (result) |
| return result; |
| |
| if ((result = attach_hdlc_protocol(dev, &proto, |
| sizeof(struct x25_state)))) |
| return result; |
| |
| memcpy(&state(hdlc)->settings, &new_settings, size); |
| dev->type = ARPHRD_X25; |
| call_netdevice_notifiers(NETDEV_POST_TYPE_CHANGE, dev); |
| netif_dormant_off(dev); |
| return 0; |
| } |
| |
| return -EINVAL; |
| } |
| |
| |
| static int __init mod_init(void) |
| { |
| register_hdlc_protocol(&proto); |
| return 0; |
| } |
| |
| |
| |
| static void __exit mod_exit(void) |
| { |
| unregister_hdlc_protocol(&proto); |
| } |
| |
| |
| module_init(mod_init); |
| module_exit(mod_exit); |
| |
| MODULE_AUTHOR("Krzysztof Halasa <khc@pm.waw.pl>"); |
| MODULE_DESCRIPTION("X.25 protocol support for generic HDLC"); |
| MODULE_LICENSE("GPL v2"); |