Documentation/devicetree/bindings/pinctrl/fsl,scu-pinctrl.yaml

# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/pinctrl/fsl,scu-pinctrl.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: i.MX SCU Client Device Node - Pinctrl bindings based on SCU Message Protocol

maintainers:
  - Dong Aisheng <aisheng.dong@nxp.com>

description: i.MX SCU Client Device Node
  Client nodes are maintained as children of the relevant IMX-SCU device node.
  This binding uses the i.MX common pinctrl binding.
  (Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt)

allOf:
  - $ref: pinctrl.yaml#

properties:
  compatible:
    enum:
      - fsl,imx8qm-iomuxc
      - fsl,imx8qxp-iomuxc
      - fsl,imx8dxl-iomuxc

patternProperties:
  'grp$':
    type: object
    description:
      Pinctrl node's client devices use subnodes for desired pin configuration.
      Client device subnodes use below standard properties.

    properties:
      fsl,pins:
        description:
          each entry consists of 3 integers and represents the pin ID, the mux value
          and pad setting for the pin. The first 2 integers - pin_id and mux_val - are
          specified using a PIN_FUNC_ID macro, which can be found in
          <include/dt-bindings/pinctrl/pads-imx8qxp.h>. The last integer is
          the pad setting value like pull-up on this pin. Please refer to the
          appropriate i.MX8 Reference Manual for detailed pad CONFIG settings.
        $ref: /schemas/types.yaml#/definitions/uint32-matrix
        items:
          items:
            - description: |
                "pin_id" indicates the pin ID
            - description: |
                "mux_val" indicates the mux value to be applied.
            - description: |
                "pad_setting" indicates the pad configuration value to be applied.

    required:
      - fsl,pins

    additionalProperties: false

required:
  - compatible

additionalProperties: false

examples:
  - |
    pinctrl {
        compatible = "fsl,imx8qxp-iomuxc";

        pinctrl_lpuart0: lpuart0grp {
            fsl,pins = <
                111 0 0x06000020
                112 0 0x06000020
            >;
        };
    };