| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * PWM framework driver for Cirrus Logic EP93xx |
| * |
| * Copyright (c) 2009 Matthieu Crapet <mcrapet@gmail.com> |
| * Copyright (c) 2009, 2013 H Hartley Sweeten <hsweeten@visionengravers.com> |
| * |
| * EP9301/02 have only one channel: |
| * platform device ep93xx-pwm.1 - PWMOUT1 (EGPIO14) |
| * |
| * EP9307 has only one channel: |
| * platform device ep93xx-pwm.0 - PWMOUT |
| * |
| * EP9312/15 have two channels: |
| * platform device ep93xx-pwm.0 - PWMOUT |
| * platform device ep93xx-pwm.1 - PWMOUT1 (EGPIO14) |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/slab.h> |
| #include <linux/clk.h> |
| #include <linux/err.h> |
| #include <linux/io.h> |
| #include <linux/pwm.h> |
| |
| #include <asm/div64.h> |
| |
| #include <linux/soc/cirrus/ep93xx.h> /* for ep93xx_pwm_{acquire,release}_gpio() */ |
| |
| #define EP93XX_PWMx_TERM_COUNT 0x00 |
| #define EP93XX_PWMx_DUTY_CYCLE 0x04 |
| #define EP93XX_PWMx_ENABLE 0x08 |
| #define EP93XX_PWMx_INVERT 0x0c |
| |
| struct ep93xx_pwm { |
| void __iomem *base; |
| struct clk *clk; |
| struct pwm_chip chip; |
| }; |
| |
| static inline struct ep93xx_pwm *to_ep93xx_pwm(struct pwm_chip *chip) |
| { |
| return container_of(chip, struct ep93xx_pwm, chip); |
| } |
| |
| static int ep93xx_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm) |
| { |
| struct platform_device *pdev = to_platform_device(chip->dev); |
| |
| return ep93xx_pwm_acquire_gpio(pdev); |
| } |
| |
| static void ep93xx_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm) |
| { |
| struct platform_device *pdev = to_platform_device(chip->dev); |
| |
| ep93xx_pwm_release_gpio(pdev); |
| } |
| |
| static int ep93xx_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm, |
| const struct pwm_state *state) |
| { |
| int ret; |
| struct ep93xx_pwm *ep93xx_pwm = to_ep93xx_pwm(chip); |
| bool enabled = state->enabled; |
| void __iomem *base = ep93xx_pwm->base; |
| unsigned long long c; |
| unsigned long period_cycles; |
| unsigned long duty_cycles; |
| unsigned long term; |
| |
| if (state->polarity != pwm->state.polarity) { |
| if (enabled) { |
| writew(0x0, ep93xx_pwm->base + EP93XX_PWMx_ENABLE); |
| clk_disable_unprepare(ep93xx_pwm->clk); |
| enabled = false; |
| } |
| |
| /* |
| * The clock needs to be enabled to access the PWM registers. |
| * Polarity can only be changed when the PWM is disabled. |
| */ |
| ret = clk_prepare_enable(ep93xx_pwm->clk); |
| if (ret) |
| return ret; |
| |
| if (state->polarity == PWM_POLARITY_INVERSED) |
| writew(0x1, ep93xx_pwm->base + EP93XX_PWMx_INVERT); |
| else |
| writew(0x0, ep93xx_pwm->base + EP93XX_PWMx_INVERT); |
| |
| clk_disable_unprepare(ep93xx_pwm->clk); |
| } |
| |
| if (!state->enabled) { |
| if (enabled) { |
| writew(0x0, ep93xx_pwm->base + EP93XX_PWMx_ENABLE); |
| clk_disable_unprepare(ep93xx_pwm->clk); |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * The clock needs to be enabled to access the PWM registers. |
| * Configuration can be changed at any time. |
| */ |
| if (!pwm_is_enabled(pwm)) { |
| ret = clk_prepare_enable(ep93xx_pwm->clk); |
| if (ret) |
| return ret; |
| } |
| |
| c = clk_get_rate(ep93xx_pwm->clk); |
| c *= state->period; |
| do_div(c, 1000000000); |
| period_cycles = c; |
| |
| c = period_cycles; |
| c *= state->duty_cycle; |
| do_div(c, state->period); |
| duty_cycles = c; |
| |
| if (period_cycles < 0x10000 && duty_cycles < 0x10000) { |
| term = readw(base + EP93XX_PWMx_TERM_COUNT); |
| |
| /* Order is important if PWM is running */ |
| if (period_cycles > term) { |
| writew(period_cycles, base + EP93XX_PWMx_TERM_COUNT); |
| writew(duty_cycles, base + EP93XX_PWMx_DUTY_CYCLE); |
| } else { |
| writew(duty_cycles, base + EP93XX_PWMx_DUTY_CYCLE); |
| writew(period_cycles, base + EP93XX_PWMx_TERM_COUNT); |
| } |
| ret = 0; |
| } else { |
| ret = -EINVAL; |
| } |
| |
| if (!pwm_is_enabled(pwm)) |
| clk_disable_unprepare(ep93xx_pwm->clk); |
| |
| if (ret) |
| return ret; |
| |
| if (!enabled) { |
| ret = clk_prepare_enable(ep93xx_pwm->clk); |
| if (ret) |
| return ret; |
| |
| writew(0x1, ep93xx_pwm->base + EP93XX_PWMx_ENABLE); |
| } |
| |
| return 0; |
| } |
| |
| static const struct pwm_ops ep93xx_pwm_ops = { |
| .request = ep93xx_pwm_request, |
| .free = ep93xx_pwm_free, |
| .apply = ep93xx_pwm_apply, |
| }; |
| |
| static int ep93xx_pwm_probe(struct platform_device *pdev) |
| { |
| struct ep93xx_pwm *ep93xx_pwm; |
| int ret; |
| |
| ep93xx_pwm = devm_kzalloc(&pdev->dev, sizeof(*ep93xx_pwm), GFP_KERNEL); |
| if (!ep93xx_pwm) |
| return -ENOMEM; |
| |
| ep93xx_pwm->base = devm_platform_ioremap_resource(pdev, 0); |
| if (IS_ERR(ep93xx_pwm->base)) |
| return PTR_ERR(ep93xx_pwm->base); |
| |
| ep93xx_pwm->clk = devm_clk_get(&pdev->dev, "pwm_clk"); |
| if (IS_ERR(ep93xx_pwm->clk)) |
| return PTR_ERR(ep93xx_pwm->clk); |
| |
| ep93xx_pwm->chip.dev = &pdev->dev; |
| ep93xx_pwm->chip.ops = &ep93xx_pwm_ops; |
| ep93xx_pwm->chip.npwm = 1; |
| |
| ret = devm_pwmchip_add(&pdev->dev, &ep93xx_pwm->chip); |
| if (ret < 0) |
| return ret; |
| |
| return 0; |
| } |
| |
| static struct platform_driver ep93xx_pwm_driver = { |
| .driver = { |
| .name = "ep93xx-pwm", |
| }, |
| .probe = ep93xx_pwm_probe, |
| }; |
| module_platform_driver(ep93xx_pwm_driver); |
| |
| MODULE_DESCRIPTION("Cirrus Logic EP93xx PWM driver"); |
| MODULE_AUTHOR("Matthieu Crapet <mcrapet@gmail.com>"); |
| MODULE_AUTHOR("H Hartley Sweeten <hsweeten@visionengravers.com>"); |
| MODULE_ALIAS("platform:ep93xx-pwm"); |
| MODULE_LICENSE("GPL"); |