blob: c6826d1e8082584268d1b5e8f3abeb176ee61187 [file] [log] [blame]
/*
* Intel CPU Microcode Update Driver for Linux
*
* Copyright (C) 2000-2006 Tigran Aivazian <tigran@aivazian.fsnet.co.uk>
* 2006 Shaohua Li <shaohua.li@intel.com>
*
* This driver allows to upgrade microcode on Intel processors
* belonging to IA-32 family - PentiumPro, Pentium II,
* Pentium III, Xeon, Pentium 4, etc.
*
* Reference: Section 8.11 of Volume 3a, IA-32 Intel? Architecture
* Software Developer's Manual
* Order Number 253668 or free download from:
*
* http://developer.intel.com/Assets/PDF/manual/253668.pdf
*
* For more information, go to http://www.urbanmyth.org/microcode
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
* 1.0 16 Feb 2000, Tigran Aivazian <tigran@sco.com>
* Initial release.
* 1.01 18 Feb 2000, Tigran Aivazian <tigran@sco.com>
* Added read() support + cleanups.
* 1.02 21 Feb 2000, Tigran Aivazian <tigran@sco.com>
* Added 'device trimming' support. open(O_WRONLY) zeroes
* and frees the saved copy of applied microcode.
* 1.03 29 Feb 2000, Tigran Aivazian <tigran@sco.com>
* Made to use devfs (/dev/cpu/microcode) + cleanups.
* 1.04 06 Jun 2000, Simon Trimmer <simon@veritas.com>
* Added misc device support (now uses both devfs and misc).
* Added MICROCODE_IOCFREE ioctl to clear memory.
* 1.05 09 Jun 2000, Simon Trimmer <simon@veritas.com>
* Messages for error cases (non Intel & no suitable microcode).
* 1.06 03 Aug 2000, Tigran Aivazian <tigran@veritas.com>
* Removed ->release(). Removed exclusive open and status bitmap.
* Added microcode_rwsem to serialize read()/write()/ioctl().
* Removed global kernel lock usage.
* 1.07 07 Sep 2000, Tigran Aivazian <tigran@veritas.com>
* Write 0 to 0x8B msr and then cpuid before reading revision,
* so that it works even if there were no update done by the
* BIOS. Otherwise, reading from 0x8B gives junk (which happened
* to be 0 on my machine which is why it worked even when I
* disabled update by the BIOS)
* Thanks to Eric W. Biederman <ebiederman@lnxi.com> for the fix.
* 1.08 11 Dec 2000, Richard Schaal <richard.schaal@intel.com> and
* Tigran Aivazian <tigran@veritas.com>
* Intel Pentium 4 processor support and bugfixes.
* 1.09 30 Oct 2001, Tigran Aivazian <tigran@veritas.com>
* Bugfix for HT (Hyper-Threading) enabled processors
* whereby processor resources are shared by all logical processors
* in a single CPU package.
* 1.10 28 Feb 2002 Asit K Mallick <asit.k.mallick@intel.com> and
* Tigran Aivazian <tigran@veritas.com>,
* Serialize updates as required on HT processors due to
* speculative nature of implementation.
* 1.11 22 Mar 2002 Tigran Aivazian <tigran@veritas.com>
* Fix the panic when writing zero-length microcode chunk.
* 1.12 29 Sep 2003 Nitin Kamble <nitin.a.kamble@intel.com>,
* Jun Nakajima <jun.nakajima@intel.com>
* Support for the microcode updates in the new format.
* 1.13 10 Oct 2003 Tigran Aivazian <tigran@veritas.com>
* Removed ->read() method and obsoleted MICROCODE_IOCFREE ioctl
* because we no longer hold a copy of applied microcode
* in kernel memory.
* 1.14 25 Jun 2004 Tigran Aivazian <tigran@veritas.com>
* Fix sigmatch() macro to handle old CPUs with pf == 0.
* Thanks to Stuart Swales for pointing out this bug.
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/firmware.h>
#include <linux/uaccess.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/vmalloc.h>
#include <asm/microcode_intel.h>
#include <asm/processor.h>
#include <asm/msr.h>
MODULE_DESCRIPTION("Microcode Update Driver");
MODULE_AUTHOR("Tigran Aivazian <tigran@aivazian.fsnet.co.uk>");
MODULE_LICENSE("GPL");
static int collect_cpu_info(int cpu_num, struct cpu_signature *csig)
{
struct cpuinfo_x86 *c = &cpu_data(cpu_num);
unsigned int val[2];
memset(csig, 0, sizeof(*csig));
csig->sig = cpuid_eax(0x00000001);
if ((c->x86_model >= 5) || (c->x86 > 6)) {
/* get processor flags from MSR 0x17 */
rdmsr(MSR_IA32_PLATFORM_ID, val[0], val[1]);
csig->pf = 1 << ((val[1] >> 18) & 7);
}
csig->rev = c->microcode;
pr_info("CPU%d sig=0x%x, pf=0x%x, revision=0x%x\n",
cpu_num, csig->sig, csig->pf, csig->rev);
return 0;
}
/*
* return 0 - no update found
* return 1 - found update
*/
static int get_matching_mc(struct microcode_intel *mc_intel, int cpu)
{
struct cpu_signature cpu_sig;
unsigned int csig, cpf, crev;
collect_cpu_info(cpu, &cpu_sig);
csig = cpu_sig.sig;
cpf = cpu_sig.pf;
crev = cpu_sig.rev;
return get_matching_microcode(csig, cpf, mc_intel, crev);
}
static int apply_microcode_intel(int cpu)
{
struct microcode_intel *mc_intel;
struct ucode_cpu_info *uci;
unsigned int val[2];
int cpu_num = raw_smp_processor_id();
struct cpuinfo_x86 *c = &cpu_data(cpu_num);
uci = ucode_cpu_info + cpu;
mc_intel = uci->mc;
/* We should bind the task to the CPU */
BUG_ON(cpu_num != cpu);
if (mc_intel == NULL)
return 0;
/*
* Microcode on this CPU could be updated earlier. Only apply the
* microcode patch in mc_intel when it is newer than the one on this
* CPU.
*/
if (get_matching_mc(mc_intel, cpu) == 0)
return 0;
/* write microcode via MSR 0x79 */
wrmsr(MSR_IA32_UCODE_WRITE,
(unsigned long) mc_intel->bits,
(unsigned long) mc_intel->bits >> 16 >> 16);
wrmsr(MSR_IA32_UCODE_REV, 0, 0);
/* As documented in the SDM: Do a CPUID 1 here */
sync_core();
/* get the current revision from MSR 0x8B */
rdmsr(MSR_IA32_UCODE_REV, val[0], val[1]);
if (val[1] != mc_intel->hdr.rev) {
pr_err("CPU%d update to revision 0x%x failed\n",
cpu_num, mc_intel->hdr.rev);
return -1;
}
pr_info("CPU%d updated to revision 0x%x, date = %04x-%02x-%02x\n",
cpu_num, val[1],
mc_intel->hdr.date & 0xffff,
mc_intel->hdr.date >> 24,
(mc_intel->hdr.date >> 16) & 0xff);
uci->cpu_sig.rev = val[1];
c->microcode = val[1];
return 0;
}
static enum ucode_state generic_load_microcode(int cpu, void *data, size_t size,
int (*get_ucode_data)(void *, const void *, size_t))
{
struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
u8 *ucode_ptr = data, *new_mc = NULL, *mc = NULL;
int new_rev = uci->cpu_sig.rev;
unsigned int leftover = size;
enum ucode_state state = UCODE_OK;
unsigned int curr_mc_size = 0;
unsigned int csig, cpf;
while (leftover) {
struct microcode_header_intel mc_header;
unsigned int mc_size;
if (get_ucode_data(&mc_header, ucode_ptr, sizeof(mc_header)))
break;
mc_size = get_totalsize(&mc_header);
if (!mc_size || mc_size > leftover) {
pr_err("error! Bad data in microcode data file\n");
break;
}
/* For performance reasons, reuse mc area when possible */
if (!mc || mc_size > curr_mc_size) {
vfree(mc);
mc = vmalloc(mc_size);
if (!mc)
break;
curr_mc_size = mc_size;
}
if (get_ucode_data(mc, ucode_ptr, mc_size) ||
microcode_sanity_check(mc, 1) < 0) {
break;
}
csig = uci->cpu_sig.sig;
cpf = uci->cpu_sig.pf;
if (get_matching_microcode(csig, cpf, mc, new_rev)) {
vfree(new_mc);
new_rev = mc_header.rev;
new_mc = mc;
mc = NULL; /* trigger new vmalloc */
}
ucode_ptr += mc_size;
leftover -= mc_size;
}
vfree(mc);
if (leftover) {
vfree(new_mc);
state = UCODE_ERROR;
goto out;
}
if (!new_mc) {
state = UCODE_NFOUND;
goto out;
}
vfree(uci->mc);
uci->mc = (struct microcode_intel *)new_mc;
/*
* If early loading microcode is supported, save this mc into
* permanent memory. So it will be loaded early when a CPU is hot added
* or resumes.
*/
save_mc_for_early(new_mc);
pr_debug("CPU%d found a matching microcode update with version 0x%x (current=0x%x)\n",
cpu, new_rev, uci->cpu_sig.rev);
out:
return state;
}
static int get_ucode_fw(void *to, const void *from, size_t n)
{
memcpy(to, from, n);
return 0;
}
static enum ucode_state request_microcode_fw(int cpu, struct device *device,
bool refresh_fw)
{
char name[30];
struct cpuinfo_x86 *c = &cpu_data(cpu);
const struct firmware *firmware;
enum ucode_state ret;
sprintf(name, "intel-ucode/%02x-%02x-%02x",
c->x86, c->x86_model, c->x86_mask);
if (request_firmware_direct(&firmware, name, device)) {
pr_debug("data file %s load failed\n", name);
return UCODE_NFOUND;
}
ret = generic_load_microcode(cpu, (void *)firmware->data,
firmware->size, &get_ucode_fw);
release_firmware(firmware);
return ret;
}
static int get_ucode_user(void *to, const void *from, size_t n)
{
return copy_from_user(to, from, n);
}
static enum ucode_state
request_microcode_user(int cpu, const void __user *buf, size_t size)
{
return generic_load_microcode(cpu, (void *)buf, size, &get_ucode_user);
}
static void microcode_fini_cpu(int cpu)
{
struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
vfree(uci->mc);
uci->mc = NULL;
}
static struct microcode_ops microcode_intel_ops = {
.request_microcode_user = request_microcode_user,
.request_microcode_fw = request_microcode_fw,
.collect_cpu_info = collect_cpu_info,
.apply_microcode = apply_microcode_intel,
.microcode_fini_cpu = microcode_fini_cpu,
};
struct microcode_ops * __init init_intel_microcode(void)
{
struct cpuinfo_x86 *c = &cpu_data(0);
if (c->x86_vendor != X86_VENDOR_INTEL || c->x86 < 6 ||
cpu_has(c, X86_FEATURE_IA64)) {
pr_err("Intel CPU family 0x%x not supported\n", c->x86);
return NULL;
}
return &microcode_intel_ops;
}