blob: 1ed1fbba5d58140912258d80bf8279bb9a2686a1 [file] [log] [blame]
#
# Ethernet LAN device configuration
#
menuconfig ETHERNET
bool "Ethernet driver support"
depends on NET
default y
---help---
This section contains all the Ethernet device drivers.
if ETHERNET
config MDIO
tristate
config SUNGEM_PHY
tristate
source "drivers/net/ethernet/3com/Kconfig"
source "drivers/net/ethernet/adaptec/Kconfig"
source "drivers/net/ethernet/aeroflex/Kconfig"
source "drivers/net/ethernet/agere/Kconfig"
source "drivers/net/ethernet/allwinner/Kconfig"
source "drivers/net/ethernet/alteon/Kconfig"
source "drivers/net/ethernet/altera/Kconfig"
source "drivers/net/ethernet/amd/Kconfig"
source "drivers/net/ethernet/apm/Kconfig"
source "drivers/net/ethernet/apple/Kconfig"
source "drivers/net/ethernet/arc/Kconfig"
source "drivers/net/ethernet/atheros/Kconfig"
source "drivers/net/ethernet/cadence/Kconfig"
source "drivers/net/ethernet/adi/Kconfig"
source "drivers/net/ethernet/broadcom/Kconfig"
source "drivers/net/ethernet/brocade/Kconfig"
source "drivers/net/ethernet/calxeda/Kconfig"
source "drivers/net/ethernet/chelsio/Kconfig"
source "drivers/net/ethernet/cirrus/Kconfig"
source "drivers/net/ethernet/cisco/Kconfig"
config CX_ECAT
tristate "Beckhoff CX5020 EtherCAT master support"
depends on PCI
depends on X86 || COMPILE_TEST
---help---
Driver for EtherCAT master module located on CCAT FPGA
that can be found on Beckhoff CX5020, and possibly other of CX
Beckhoff CX series industrial PCs.
To compile this driver as a module, choose M here. The module
will be called ec_bhf.
source "drivers/net/ethernet/davicom/Kconfig"
config DNET
tristate "Dave ethernet support (DNET)"
depends on HAS_IOMEM
select PHYLIB
---help---
The Dave ethernet interface (DNET) is found on Qong Board FPGA.
Say Y to include support for the DNET chip.
To compile this driver as a module, choose M here: the module
will be called dnet.
source "drivers/net/ethernet/dec/Kconfig"
source "drivers/net/ethernet/dlink/Kconfig"
source "drivers/net/ethernet/emulex/Kconfig"
source "drivers/net/ethernet/neterion/Kconfig"
source "drivers/net/ethernet/faraday/Kconfig"
source "drivers/net/ethernet/freescale/Kconfig"
source "drivers/net/ethernet/fujitsu/Kconfig"
source "drivers/net/ethernet/hisilicon/Kconfig"
source "drivers/net/ethernet/hp/Kconfig"
source "drivers/net/ethernet/ibm/Kconfig"
source "drivers/net/ethernet/intel/Kconfig"
source "drivers/net/ethernet/i825xx/Kconfig"
source "drivers/net/ethernet/xscale/Kconfig"
source "drivers/net/ethernet/icplus/Kconfig"
config JME
tristate "JMicron(R) PCI-Express Gigabit Ethernet support"
depends on PCI
select CRC32
select MII
---help---
This driver supports the PCI-Express gigabit ethernet adapters
based on JMicron JMC250 chipset.
To compile this driver as a module, choose M here. The module
will be called jme.
config KORINA
tristate "Korina (IDT RC32434) Ethernet support"
depends on MIKROTIK_RB532
---help---
If you have a Mikrotik RouterBoard 500 or IDT RC32434
based system say Y. Otherwise say N.
config LANTIQ_ETOP
tristate "Lantiq SoC ETOP driver"
depends on SOC_TYPE_XWAY
---help---
Support for the MII0 inside the Lantiq SoC
source "drivers/net/ethernet/marvell/Kconfig"
source "drivers/net/ethernet/mellanox/Kconfig"
source "drivers/net/ethernet/micrel/Kconfig"
source "drivers/net/ethernet/microchip/Kconfig"
source "drivers/net/ethernet/moxa/Kconfig"
source "drivers/net/ethernet/myricom/Kconfig"
config FEALNX
tristate "Myson MTD-8xx PCI Ethernet support"
depends on PCI
select CRC32
select MII
---help---
Say Y here to support the Myson MTD-800 family of PCI-based Ethernet
cards. <http://www.myson.com.tw/>
source "drivers/net/ethernet/natsemi/Kconfig"
source "drivers/net/ethernet/8390/Kconfig"
config NET_NETX
tristate "NetX Ethernet support"
select MII
depends on ARCH_NETX
---help---
This is support for the Hilscher netX builtin Ethernet ports
To compile this driver as a module, choose M here. The module
will be called netx-eth.
source "drivers/net/ethernet/nuvoton/Kconfig"
source "drivers/net/ethernet/nvidia/Kconfig"
source "drivers/net/ethernet/nxp/Kconfig"
source "drivers/net/ethernet/octeon/Kconfig"
source "drivers/net/ethernet/oki-semi/Kconfig"
config ETHOC
tristate "OpenCores 10/100 Mbps Ethernet MAC support"
depends on HAS_IOMEM && HAS_DMA
select MII
select PHYLIB
select CRC32
select BITREVERSE
---help---
Say Y here if you want to use the OpenCores 10/100 Mbps Ethernet MAC.
source "drivers/net/ethernet/packetengines/Kconfig"
source "drivers/net/ethernet/pasemi/Kconfig"
source "drivers/net/ethernet/qlogic/Kconfig"
source "drivers/net/ethernet/qualcomm/Kconfig"
source "drivers/net/ethernet/realtek/Kconfig"
source "drivers/net/ethernet/renesas/Kconfig"
source "drivers/net/ethernet/rdc/Kconfig"
config S6GMAC
tristate "S6105 GMAC ethernet support"
depends on XTENSA_VARIANT_S6000
select PHYLIB
---help---
This driver supports the on chip ethernet device on the
S6105 xtensa processor.
To compile this driver as a module, choose M here. The module
will be called s6gmac.
source "drivers/net/ethernet/samsung/Kconfig"
source "drivers/net/ethernet/seeq/Kconfig"
source "drivers/net/ethernet/silan/Kconfig"
source "drivers/net/ethernet/sis/Kconfig"
source "drivers/net/ethernet/sfc/Kconfig"
source "drivers/net/ethernet/sgi/Kconfig"
source "drivers/net/ethernet/smsc/Kconfig"
source "drivers/net/ethernet/stmicro/Kconfig"
source "drivers/net/ethernet/sun/Kconfig"
source "drivers/net/ethernet/tehuti/Kconfig"
source "drivers/net/ethernet/ti/Kconfig"
source "drivers/net/ethernet/tile/Kconfig"
source "drivers/net/ethernet/toshiba/Kconfig"
source "drivers/net/ethernet/tundra/Kconfig"
source "drivers/net/ethernet/via/Kconfig"
source "drivers/net/ethernet/wiznet/Kconfig"
source "drivers/net/ethernet/xilinx/Kconfig"
source "drivers/net/ethernet/xircom/Kconfig"
endif # ETHERNET