| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Watchdog driver for the A21 VME CPU Boards |
| * |
| * Copyright (C) 2013 MEN Mikro Elektronik Nuernberg GmbH |
| * |
| */ |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/types.h> |
| #include <linux/kernel.h> |
| #include <linux/slab.h> |
| #include <linux/platform_device.h> |
| #include <linux/watchdog.h> |
| #include <linux/uaccess.h> |
| #include <linux/gpio/consumer.h> |
| #include <linux/delay.h> |
| #include <linux/bitops.h> |
| #include <linux/of.h> |
| |
| #define NUM_GPIOS 6 |
| |
| enum a21_wdt_gpios { |
| GPIO_WD_ENAB, |
| GPIO_WD_FAST, |
| GPIO_WD_TRIG, |
| GPIO_WD_RST0, |
| GPIO_WD_RST1, |
| GPIO_WD_RST2, |
| }; |
| |
| struct a21_wdt_drv { |
| struct watchdog_device wdt; |
| struct gpio_desc *gpios[NUM_GPIOS]; |
| }; |
| |
| static bool nowayout = WATCHDOG_NOWAYOUT; |
| module_param(nowayout, bool, 0); |
| MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" |
| __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); |
| |
| static unsigned int a21_wdt_get_bootstatus(struct a21_wdt_drv *drv) |
| { |
| int reset = 0; |
| |
| reset |= gpiod_get_value(drv->gpios[GPIO_WD_RST0]) ? (1 << 0) : 0; |
| reset |= gpiod_get_value(drv->gpios[GPIO_WD_RST1]) ? (1 << 1) : 0; |
| reset |= gpiod_get_value(drv->gpios[GPIO_WD_RST2]) ? (1 << 2) : 0; |
| |
| return reset; |
| } |
| |
| static int a21_wdt_start(struct watchdog_device *wdt) |
| { |
| struct a21_wdt_drv *drv = watchdog_get_drvdata(wdt); |
| |
| gpiod_set_value(drv->gpios[GPIO_WD_ENAB], 1); |
| |
| return 0; |
| } |
| |
| static int a21_wdt_stop(struct watchdog_device *wdt) |
| { |
| struct a21_wdt_drv *drv = watchdog_get_drvdata(wdt); |
| |
| gpiod_set_value(drv->gpios[GPIO_WD_ENAB], 0); |
| |
| return 0; |
| } |
| |
| static int a21_wdt_ping(struct watchdog_device *wdt) |
| { |
| struct a21_wdt_drv *drv = watchdog_get_drvdata(wdt); |
| |
| gpiod_set_value(drv->gpios[GPIO_WD_TRIG], 0); |
| ndelay(10); |
| gpiod_set_value(drv->gpios[GPIO_WD_TRIG], 1); |
| |
| return 0; |
| } |
| |
| static int a21_wdt_set_timeout(struct watchdog_device *wdt, |
| unsigned int timeout) |
| { |
| struct a21_wdt_drv *drv = watchdog_get_drvdata(wdt); |
| |
| if (timeout != 1 && timeout != 30) { |
| dev_err(wdt->parent, "Only 1 and 30 allowed as timeout\n"); |
| return -EINVAL; |
| } |
| |
| if (timeout == 30 && wdt->timeout == 1) { |
| dev_err(wdt->parent, |
| "Transition from fast to slow mode not allowed\n"); |
| return -EINVAL; |
| } |
| |
| if (timeout == 1) |
| gpiod_set_value(drv->gpios[GPIO_WD_FAST], 1); |
| else |
| gpiod_set_value(drv->gpios[GPIO_WD_FAST], 0); |
| |
| wdt->timeout = timeout; |
| |
| return 0; |
| } |
| |
| static const struct watchdog_info a21_wdt_info = { |
| .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE, |
| .identity = "MEN A21 Watchdog", |
| }; |
| |
| static const struct watchdog_ops a21_wdt_ops = { |
| .owner = THIS_MODULE, |
| .start = a21_wdt_start, |
| .stop = a21_wdt_stop, |
| .ping = a21_wdt_ping, |
| .set_timeout = a21_wdt_set_timeout, |
| }; |
| |
| static struct watchdog_device a21_wdt = { |
| .info = &a21_wdt_info, |
| .ops = &a21_wdt_ops, |
| .min_timeout = 1, |
| .max_timeout = 30, |
| }; |
| |
| static int a21_wdt_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct a21_wdt_drv *drv; |
| unsigned int reset = 0; |
| int num_gpios; |
| int ret; |
| int i; |
| |
| drv = devm_kzalloc(dev, sizeof(struct a21_wdt_drv), GFP_KERNEL); |
| if (!drv) |
| return -ENOMEM; |
| |
| num_gpios = gpiod_count(dev, NULL); |
| if (num_gpios != NUM_GPIOS) { |
| dev_err(dev, "gpios DT property wrong, got %d want %d", |
| num_gpios, NUM_GPIOS); |
| return -ENODEV; |
| } |
| |
| /* Request the used GPIOs */ |
| for (i = 0; i < num_gpios; i++) { |
| enum gpiod_flags gflags; |
| |
| if (i < GPIO_WD_RST0) |
| gflags = GPIOD_ASIS; |
| else |
| gflags = GPIOD_IN; |
| drv->gpios[i] = devm_gpiod_get_index(dev, NULL, i, gflags); |
| if (IS_ERR(drv->gpios[i])) |
| return PTR_ERR(drv->gpios[i]); |
| |
| gpiod_set_consumer_name(drv->gpios[i], "MEN A21 Watchdog"); |
| |
| /* |
| * Retrieve the initial value from the GPIOs that should be |
| * output, then set up the line as output with that value. |
| */ |
| if (i < GPIO_WD_RST0) { |
| int val; |
| |
| val = gpiod_get_value(drv->gpios[i]); |
| gpiod_direction_output(drv->gpios[i], val); |
| } |
| } |
| |
| watchdog_init_timeout(&a21_wdt, 30, dev); |
| watchdog_set_nowayout(&a21_wdt, nowayout); |
| watchdog_set_drvdata(&a21_wdt, drv); |
| a21_wdt.parent = dev; |
| |
| reset = a21_wdt_get_bootstatus(drv); |
| if (reset == 2) |
| a21_wdt.bootstatus |= WDIOF_EXTERN1; |
| else if (reset == 4) |
| a21_wdt.bootstatus |= WDIOF_CARDRESET; |
| else if (reset == 5) |
| a21_wdt.bootstatus |= WDIOF_POWERUNDER; |
| else if (reset == 7) |
| a21_wdt.bootstatus |= WDIOF_EXTERN2; |
| |
| drv->wdt = a21_wdt; |
| dev_set_drvdata(dev, drv); |
| |
| ret = devm_watchdog_register_device(dev, &a21_wdt); |
| if (ret) { |
| dev_err(dev, "Cannot register watchdog device\n"); |
| return ret; |
| } |
| |
| dev_info(dev, "MEN A21 watchdog timer driver enabled\n"); |
| |
| return 0; |
| } |
| |
| static void a21_wdt_shutdown(struct platform_device *pdev) |
| { |
| struct a21_wdt_drv *drv = dev_get_drvdata(&pdev->dev); |
| |
| gpiod_set_value(drv->gpios[GPIO_WD_ENAB], 0); |
| } |
| |
| static const struct of_device_id a21_wdt_ids[] = { |
| { .compatible = "men,a021-wdt" }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(of, a21_wdt_ids); |
| |
| static struct platform_driver a21_wdt_driver = { |
| .probe = a21_wdt_probe, |
| .shutdown = a21_wdt_shutdown, |
| .driver = { |
| .name = "a21-watchdog", |
| .of_match_table = a21_wdt_ids, |
| }, |
| }; |
| |
| module_platform_driver(a21_wdt_driver); |
| |
| MODULE_AUTHOR("MEN Mikro Elektronik"); |
| MODULE_DESCRIPTION("MEN A21 Watchdog"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:a21-watchdog"); |