| /* |
| * drivers/power/process.c - Functions for starting/stopping processes on |
| * suspend transitions. |
| * |
| * Originally from swsusp. |
| */ |
| |
| |
| #undef DEBUG |
| |
| #include <linux/interrupt.h> |
| #include <linux/oom.h> |
| #include <linux/suspend.h> |
| #include <linux/module.h> |
| #include <linux/syscalls.h> |
| #include <linux/freezer.h> |
| #include <linux/delay.h> |
| #include <linux/workqueue.h> |
| |
| /* |
| * Timeout for stopping processes |
| */ |
| #define TIMEOUT (20 * HZ) |
| |
| static int try_to_freeze_tasks(bool user_only) |
| { |
| struct task_struct *g, *p; |
| unsigned long end_time; |
| unsigned int todo; |
| bool wq_busy = false; |
| struct timeval start, end; |
| u64 elapsed_csecs64; |
| unsigned int elapsed_csecs; |
| bool wakeup = false; |
| |
| do_gettimeofday(&start); |
| |
| end_time = jiffies + TIMEOUT; |
| |
| if (!user_only) |
| freeze_workqueues_begin(); |
| |
| while (true) { |
| todo = 0; |
| read_lock(&tasklist_lock); |
| do_each_thread(g, p) { |
| if (p == current || !freeze_task(p)) |
| continue; |
| |
| /* |
| * Now that we've done set_freeze_flag, don't |
| * perturb a task in TASK_STOPPED or TASK_TRACED. |
| * It is "frozen enough". If the task does wake |
| * up, it will immediately call try_to_freeze. |
| * |
| * Because freeze_task() goes through p's |
| * scheduler lock after setting TIF_FREEZE, it's |
| * guaranteed that either we see TASK_RUNNING or |
| * try_to_stop() after schedule() in ptrace/signal |
| * stop sees TIF_FREEZE. |
| */ |
| if (!task_is_stopped_or_traced(p) && |
| !freezer_should_skip(p)) |
| todo++; |
| } while_each_thread(g, p); |
| read_unlock(&tasklist_lock); |
| |
| if (!user_only) { |
| wq_busy = freeze_workqueues_busy(); |
| todo += wq_busy; |
| } |
| |
| if (!todo || time_after(jiffies, end_time)) |
| break; |
| |
| if (pm_wakeup_pending()) { |
| wakeup = true; |
| break; |
| } |
| |
| /* |
| * We need to retry, but first give the freezing tasks some |
| * time to enter the regrigerator. |
| */ |
| msleep(10); |
| } |
| |
| do_gettimeofday(&end); |
| elapsed_csecs64 = timeval_to_ns(&end) - timeval_to_ns(&start); |
| do_div(elapsed_csecs64, NSEC_PER_SEC / 100); |
| elapsed_csecs = elapsed_csecs64; |
| |
| if (todo) { |
| printk("\n"); |
| printk(KERN_ERR "Freezing of tasks %s after %d.%02d seconds " |
| "(%d tasks refusing to freeze, wq_busy=%d):\n", |
| wakeup ? "aborted" : "failed", |
| elapsed_csecs / 100, elapsed_csecs % 100, |
| todo - wq_busy, wq_busy); |
| |
| read_lock(&tasklist_lock); |
| do_each_thread(g, p) { |
| if (!wakeup && !freezer_should_skip(p) && |
| p != current && freezing(p) && !frozen(p)) |
| sched_show_task(p); |
| } while_each_thread(g, p); |
| read_unlock(&tasklist_lock); |
| } else { |
| printk("(elapsed %d.%02d seconds) ", elapsed_csecs / 100, |
| elapsed_csecs % 100); |
| } |
| |
| return todo ? -EBUSY : 0; |
| } |
| |
| /** |
| * freeze_processes - Signal user space processes to enter the refrigerator. |
| * |
| * On success, returns 0. On failure, -errno and system is fully thawed. |
| */ |
| int freeze_processes(void) |
| { |
| int error; |
| |
| if (!pm_freezing) |
| atomic_inc(&system_freezing_cnt); |
| |
| printk("Freezing user space processes ... "); |
| pm_freezing = true; |
| error = try_to_freeze_tasks(true); |
| if (!error) { |
| printk("done."); |
| oom_killer_disable(); |
| } |
| printk("\n"); |
| BUG_ON(in_atomic()); |
| |
| if (error) |
| thaw_processes(); |
| return error; |
| } |
| |
| /** |
| * freeze_kernel_threads - Make freezable kernel threads go to the refrigerator. |
| * |
| * On success, returns 0. On failure, -errno and only the kernel threads are |
| * thawed, so as to give a chance to the caller to do additional cleanups |
| * (if any) before thawing the userspace tasks. So, it is the responsibility |
| * of the caller to thaw the userspace tasks, when the time is right. |
| */ |
| int freeze_kernel_threads(void) |
| { |
| int error; |
| |
| printk("Freezing remaining freezable tasks ... "); |
| pm_nosig_freezing = true; |
| error = try_to_freeze_tasks(false); |
| if (!error) |
| printk("done."); |
| |
| printk("\n"); |
| BUG_ON(in_atomic()); |
| |
| if (error) |
| thaw_kernel_threads(); |
| return error; |
| } |
| |
| void thaw_processes(void) |
| { |
| struct task_struct *g, *p; |
| |
| if (pm_freezing) |
| atomic_dec(&system_freezing_cnt); |
| pm_freezing = false; |
| pm_nosig_freezing = false; |
| |
| oom_killer_enable(); |
| |
| printk("Restarting tasks ... "); |
| |
| thaw_workqueues(); |
| |
| read_lock(&tasklist_lock); |
| do_each_thread(g, p) { |
| __thaw_task(p); |
| } while_each_thread(g, p); |
| read_unlock(&tasklist_lock); |
| |
| schedule(); |
| printk("done.\n"); |
| } |
| |
| void thaw_kernel_threads(void) |
| { |
| struct task_struct *g, *p; |
| |
| pm_nosig_freezing = false; |
| printk("Restarting kernel threads ... "); |
| |
| thaw_workqueues(); |
| |
| read_lock(&tasklist_lock); |
| do_each_thread(g, p) { |
| if (p->flags & (PF_KTHREAD | PF_WQ_WORKER)) |
| __thaw_task(p); |
| } while_each_thread(g, p); |
| read_unlock(&tasklist_lock); |
| |
| schedule(); |
| printk("done.\n"); |
| } |