| /* SPDX-License-Identifier: GPL-2.0-only */ |
| /* |
| * linux/arch/unicore32/mm/proc-ucv2.S |
| * |
| * Code specific to PKUnity SoC and UniCore ISA |
| * |
| * Copyright (C) 2001-2010 GUAN Xue-tao |
| */ |
| #include <linux/init.h> |
| #include <linux/linkage.h> |
| #include <linux/pgtable.h> |
| #include <asm/assembler.h> |
| #include <asm/hwcap.h> |
| #include <asm/pgtable-hwdef.h> |
| |
| #include "proc-macros.S" |
| |
| ENTRY(cpu_proc_fin) |
| stm.w (lr), [sp-] |
| mov ip, #PSR_R_BIT | PSR_I_BIT | PRIV_MODE |
| mov.a asr, ip |
| b.l __cpuc_flush_kern_all |
| ldm.w (pc), [sp]+ |
| |
| /* |
| * cpu_reset(loc) |
| * |
| * Perform a soft reset of the system. Put the CPU into the |
| * same state as it would be if it had been reset, and branch |
| * to what would be the reset vector. |
| * |
| * - loc - location to jump to for soft reset |
| */ |
| .align 5 |
| ENTRY(cpu_reset) |
| mov ip, #0 |
| movc p0.c5, ip, #28 @ Cache invalidate all |
| nop8 |
| |
| movc p0.c6, ip, #6 @ TLB invalidate all |
| nop8 |
| |
| movc ip, p0.c1, #0 @ ctrl register |
| or ip, ip, #0x2000 @ vector base address |
| andn ip, ip, #0x000f @ ............idam |
| movc p0.c1, ip, #0 @ disable caches and mmu |
| nop |
| mov pc, r0 @ jump to loc |
| nop8 |
| |
| /* |
| * cpu_do_idle() |
| * |
| * Idle the processor (eg, wait for interrupt). |
| * |
| * IRQs are already disabled. |
| */ |
| ENTRY(cpu_do_idle) |
| mov r0, #0 @ PCI address |
| .rept 8 |
| ldw r1, [r0] |
| .endr |
| mov pc, lr |
| |
| ENTRY(cpu_dcache_clean_area) |
| #ifndef CONFIG_CPU_DCACHE_LINE_DISABLE |
| csub.a r1, #MAX_AREA_SIZE |
| bsg 101f |
| mov r9, #PAGE_SZ |
| sub r9, r9, #1 @ PAGE_MASK |
| 1: va2pa r0, r10, r11, r12, r13 @ r10 is PA |
| b 3f |
| 2: cand.a r0, r9 |
| beq 1b |
| 3: movc p0.c5, r10, #11 @ clean D entry |
| nop8 |
| add r0, r0, #CACHE_LINESIZE |
| add r10, r10, #CACHE_LINESIZE |
| sub.a r1, r1, #CACHE_LINESIZE |
| bua 2b |
| mov pc, lr |
| #endif |
| 101: mov ip, #0 |
| movc p0.c5, ip, #10 @ Dcache clean all |
| nop8 |
| |
| mov pc, lr |
| |
| /* |
| * cpu_do_switch_mm(pgd_phys) |
| * |
| * Set the translation table base pointer to be pgd_phys |
| * |
| * - pgd_phys - physical address of new pgd |
| * |
| * It is assumed that: |
| * - we are not using split page tables |
| */ |
| .align 5 |
| ENTRY(cpu_do_switch_mm) |
| movc p0.c2, r0, #0 @ update page table ptr |
| nop8 |
| |
| movc p0.c6, ip, #6 @ TLB invalidate all |
| nop8 |
| |
| mov pc, lr |
| |
| /* |
| * cpu_set_pte(ptep, pte) |
| * |
| * Set a level 2 translation table entry. |
| * |
| * - ptep - pointer to level 2 translation table entry |
| * - pte - PTE value to store |
| */ |
| .align 5 |
| ENTRY(cpu_set_pte) |
| stw r1, [r0] |
| #ifndef CONFIG_CPU_DCACHE_LINE_DISABLE |
| sub r2, r0, #PAGE_OFFSET |
| movc p0.c5, r2, #11 @ Dcache clean line |
| nop8 |
| #else |
| mov ip, #0 |
| movc p0.c5, ip, #10 @ Dcache clean all |
| nop8 |
| @dcacheline_flush r0, r2, ip |
| #endif |
| mov pc, lr |
| |