| # SPDX-License-Identifier: GPL-2.0 |
| # |
| # Copyright (c) 2012 Samsung Electronics Co., Ltd. |
| # http://www.samsung.com/ |
| # |
| # Copyright 2007 Simtec Electronics |
| menuconfig ARCH_S3C24XX |
| bool "Samsung S3C24XX SoCs (deprecated, see help)" |
| depends on ARCH_MULTI_V4T || ARCH_MULTI_V5 |
| depends on CPU_LITTLE_ENDIAN |
| select ATAGS |
| select CLKSRC_SAMSUNG_PWM |
| select GPIO_SAMSUNG |
| select GPIOLIB |
| select S3C2410_WATCHDOG |
| select SAMSUNG_ATAGS |
| select WATCHDOG |
| help |
| Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443 |
| and S3C2450 SoCs based systems, such as the Simtec Electronics BAST |
| (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or the |
| Samsung SMDK2410 development board (and derivatives). |
| |
| The platform is deprecated and scheduled for removal. Please reach to |
| the maintainers of the platform and linux-samsung-soc@vger.kernel.org if |
| you still use it. |
| Without such feedback, the platform will be removed after 2022. |
| |
| if ARCH_S3C24XX |
| |
| config PLAT_S3C24XX |
| def_bool y |
| select GPIOLIB |
| select NO_IOPORT_MAP |
| select S3C_DEV_NAND |
| select COMMON_CLK |
| help |
| Base platform code for any Samsung S3C24XX device |
| |
| |
| |
| menu "Samsung S3C24XX SoCs Support" |
| |
| comment "S3C24XX SoCs" |
| |
| config CPU_S3C2410 |
| bool "Samsung S3C2410" |
| depends on ARCH_MULTI_V4T |
| default y |
| select CPU_ARM920T |
| select S3C2410_COMMON_CLK |
| select ARM_S3C2410_CPUFREQ if ARM_S3C24XX_CPUFREQ |
| select S3C2410_PM if PM |
| help |
| Support for S3C2410 and S3C2410A family from the S3C24XX line |
| of Samsung Mobile CPUs. |
| |
| config CPU_S3C2412 |
| bool "Samsung S3C2412" |
| depends on ARCH_MULTI_V5 |
| select CPU_ARM926T |
| select S3C2412_COMMON_CLK |
| select S3C2412_PM if PM_SLEEP |
| help |
| Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line |
| |
| config CPU_S3C2416 |
| bool "Samsung S3C2416/S3C2450" |
| depends on ARCH_MULTI_V5 |
| select CPU_ARM926T |
| select S3C2416_PM if PM_SLEEP |
| select S3C2443_COMMON_CLK |
| help |
| Support for the S3C2416 SoC from the S3C24XX line |
| |
| config CPU_S3C2440 |
| bool "Samsung S3C2440" |
| depends on ARCH_MULTI_V4T |
| select CPU_ARM920T |
| select S3C2410_COMMON_CLK |
| select S3C2410_PM if PM_SLEEP |
| help |
| Support for S3C2440 Samsung Mobile CPU based systems. |
| |
| config CPU_S3C2442 |
| bool "Samsung S3C2442" |
| depends on ARCH_MULTI_V4T |
| select CPU_ARM920T |
| select S3C2410_COMMON_CLK |
| select S3C2410_PM if PM_SLEEP |
| help |
| Support for S3C2442 Samsung Mobile CPU based systems. |
| |
| config CPU_S3C244X |
| def_bool y |
| depends on CPU_S3C2440 || CPU_S3C2442 |
| |
| config CPU_S3C2443 |
| bool "Samsung S3C2443" |
| depends on ARCH_MULTI_V4T |
| select CPU_ARM920T |
| select S3C2443_COMMON_CLK |
| help |
| Support for the S3C2443 SoC from the S3C24XX line |
| |
| # common code |
| |
| config S3C24XX_SMDK |
| bool |
| help |
| Common machine code for SMDK2410 and SMDK2440 |
| |
| config S3C24XX_SIMTEC_AUDIO |
| bool |
| depends on (ARCH_BAST || MACH_VR1000 || MACH_OSIRIS || MACH_ANUBIS) |
| default y |
| help |
| Add audio devices for common Simtec S3C24XX boards |
| |
| config S3C24XX_SIMTEC_PM |
| bool |
| help |
| Common power management code for systems that are |
| compatible with the Simtec style of power management |
| |
| config S3C24XX_SIMTEC_USB |
| bool |
| help |
| USB management code for common Simtec S3C24XX boards |
| |
| config S3C24XX_SETUP_TS |
| bool |
| help |
| Compile in platform device definition for Samsung TouchScreen. |
| |
| config S3C2410_PM |
| bool |
| help |
| Power Management code common to S3C2410 and better |
| |
| config S3C24XX_PLL |
| bool "Support CPUfreq changing of PLL frequency (EXPERIMENTAL)" |
| depends on ARM_S3C24XX_CPUFREQ |
| help |
| Compile in support for changing the PLL frequency from the |
| S3C24XX series CPUfreq driver. The PLL takes time to settle |
| after a frequency change, so by default it is not enabled. |
| |
| This also means that the PLL tables for the selected CPU(s) will |
| be built which may increase the size of the kernel image. |
| |
| # cpu frequency items common between s3c2410 and s3c2440/s3c2442 |
| |
| config S3C2410_IOTIMING |
| bool |
| depends on ARM_S3C24XX_CPUFREQ |
| help |
| Internal node to select io timing code that is common to the s3c2410 |
| and s3c2440/s3c2442 cpu frequency support. |
| |
| # cpu frequency support common to s3c2412, s3c2413 and s3c2442 |
| |
| config S3C2412_IOTIMING |
| bool |
| depends on ARM_S3C24XX_CPUFREQ && (CPU_S3C2412 || CPU_S3C2443) |
| help |
| Intel node to select io timing code that is common to the s3c2412 |
| and the s3c2443. |
| |
| # cpu-specific sections |
| |
| if CPU_S3C2410 |
| |
| config S3C2410_PLL |
| bool |
| depends on ARM_S3C2410_CPUFREQ && S3C24XX_PLL |
| default y |
| help |
| Select the PLL table for the S3C2410 |
| |
| config S3C24XX_SIMTEC_NOR |
| bool |
| help |
| Internal node to specify machine has simtec NOR mapping |
| |
| config MACH_BAST_IDE |
| bool |
| select HAVE_PATA_PLATFORM |
| help |
| Internal node for machines with an BAST style IDE |
| interface |
| |
| comment "S3C2410 Boards" |
| |
| # |
| # The "S3C2410 Boards" list is ordered alphabetically by option text. |
| # (without ARCH_ or MACH_) |
| # |
| |
| config MACH_AML_M5900 |
| bool "AML M5900 Series" |
| select S3C24XX_SIMTEC_PM if PM |
| select S3C_DEV_USB_HOST |
| help |
| Say Y here if you are using the American Microsystems M5900 Series |
| <http://www.amltd.com> |
| |
| config ARCH_BAST |
| bool "Simtec Electronics BAST (EB2410ITX)" |
| select MACH_BAST_IDE |
| select S3C2410_COMMON_DCLK |
| select S3C2410_IOTIMING if ARM_S3C2410_CPUFREQ |
| select S3C24XX_SIMTEC_NOR |
| select S3C24XX_SIMTEC_PM if PM |
| select S3C24XX_SIMTEC_USB |
| select S3C_DEV_HWMON |
| select S3C_DEV_NAND |
| select S3C_DEV_USB_HOST |
| help |
| Say Y here if you are using the Simtec Electronics EB2410ITX |
| development board (also known as BAST) |
| |
| config BAST_PC104_IRQ |
| bool "BAST PC104 IRQ support" |
| depends on ARCH_BAST |
| default y |
| help |
| Say Y here to enable the PC104 IRQ routing on the |
| Simtec BAST (EB2410ITX) |
| |
| config ARCH_H1940 |
| bool "IPAQ H1940" |
| select PM_H1940 if PM |
| select S3C24XX_SETUP_TS |
| select S3C_DEV_NAND |
| select S3C_DEV_USB_HOST |
| help |
| Say Y here if you are using the HP IPAQ H1940 |
| |
| config H1940BT |
| tristate "Control the state of H1940 bluetooth chip" |
| depends on ARCH_H1940 |
| depends on RFKILL |
| help |
| This is a simple driver that is able to control |
| the state of built in bluetooth chip on h1940. |
| |
| config MACH_N30 |
| bool "Acer N30 family" |
| select S3C_DEV_NAND |
| select S3C_DEV_USB_HOST |
| help |
| Say Y here if you want suppt for the Acer N30, Acer N35, |
| Navman PiN570, Yakumo AlphaX or Airis NC05 PDAs. |
| |
| config MACH_OTOM |
| bool "NexVision OTOM Board" |
| select S3C_DEV_NAND |
| select S3C_DEV_USB_HOST |
| help |
| Say Y here if you are using the Nex Vision OTOM board |
| |
| config MACH_QT2410 |
| bool "QT2410" |
| select S3C_DEV_NAND |
| select S3C_DEV_USB_HOST |
| help |
| Say Y here if you are using the Armzone QT2410 |
| |
| config ARCH_SMDK2410 |
| bool "SMDK2410/A9M2410" |
| select S3C24XX_SMDK |
| select S3C_DEV_USB_HOST |
| help |
| Say Y here if you are using the SMDK2410 or the derived module A9M2410 |
| <http://www.fsforth.de> |
| |
| config MACH_TCT_HAMMER |
| bool "TCT Hammer Board" |
| select S3C_DEV_USB_HOST |
| help |
| Say Y here if you are using the TinCanTools Hammer Board |
| <https://www.tincantools.com> |
| |
| config MACH_VR1000 |
| bool "Thorcom VR1000" |
| select MACH_BAST_IDE |
| select S3C2410_COMMON_DCLK |
| select S3C24XX_SIMTEC_NOR |
| select S3C24XX_SIMTEC_PM if PM |
| select S3C24XX_SIMTEC_USB |
| select S3C_DEV_USB_HOST |
| help |
| Say Y here if you are using the Thorcom VR1000 board. |
| |
| endif # CPU_S3C2410 |
| |
| config S3C2412_PM_SLEEP |
| bool |
| help |
| Internal config node to apply sleep for S3C2412 power management. |
| Can be selected by another SoCs such as S3C2416 with similar |
| sleep procedure. |
| |
| if CPU_S3C2412 |
| |
| config CPU_S3C2412_ONLY |
| bool |
| depends on !CPU_S3C2410 && !CPU_S3C2416 && !CPU_S3C2440 && \ |
| !CPU_S3C2442 && !CPU_S3C2443 |
| default y |
| |
| config S3C2412_PM |
| bool |
| select S3C2412_PM_SLEEP |
| select SAMSUNG_WAKEMASK |
| help |
| Internal config node to apply S3C2412 power management |
| |
| comment "S3C2412 Boards" |
| |
| # |
| # The "S3C2412 Boards" list is ordered alphabetically by option text. |
| # (without ARCH_ or MACH_) |
| # |
| |
| config MACH_JIVE |
| bool "Logitech Jive" |
| select S3C_DEV_NAND |
| select S3C_DEV_USB_HOST |
| help |
| Say Y here if you are using the Logitech Jive. |
| |
| config MACH_JIVE_SHOW_BOOTLOADER |
| bool "Allow access to bootloader partitions in MTD" |
| depends on MACH_JIVE |
| |
| config MACH_S3C2413 |
| bool |
| help |
| Internal node for S3C2413 version of SMDK2413, so that |
| machine_is_s3c2413() will work when MACH_SMDK2413 is |
| selected |
| |
| config MACH_SMDK2412 |
| bool "SMDK2412" |
| select MACH_SMDK2413 |
| help |
| Say Y here if you are using an SMDK2412 |
| |
| Note, this shares support with SMDK2413, so will automatically |
| select MACH_SMDK2413. |
| |
| config MACH_SMDK2413 |
| bool "SMDK2413" |
| select MACH_S3C2413 |
| select S3C24XX_SMDK |
| select S3C_DEV_NAND |
| select S3C_DEV_USB_HOST |
| help |
| Say Y here if you are using an SMDK2413 |
| |
| config MACH_VSTMS |
| bool "VMSTMS" |
| select S3C_DEV_NAND |
| select S3C_DEV_USB_HOST |
| help |
| Say Y here if you are using an VSTMS board |
| |
| endif # CPU_S3C2412 |
| |
| if CPU_S3C2416 |
| |
| config S3C2416_PM |
| bool |
| select S3C2412_PM_SLEEP |
| select SAMSUNG_WAKEMASK |
| help |
| Internal config node to apply S3C2416 power management |
| |
| config S3C2416_SETUP_SDHCI |
| bool |
| select S3C2416_SETUP_SDHCI_GPIO |
| help |
| Internal helper functions for S3C2416 based SDHCI systems |
| |
| config S3C2416_SETUP_SDHCI_GPIO |
| bool |
| help |
| Common setup code for SDHCI gpio. |
| |
| comment "S3C2416 Boards" |
| |
| config MACH_SMDK2416 |
| bool "SMDK2416" |
| select S3C2416_SETUP_SDHCI |
| select S3C24XX_SMDK |
| select S3C_DEV_FB |
| select S3C_DEV_HSMMC |
| select S3C_DEV_HSMMC1 |
| select S3C_DEV_NAND |
| select S3C_DEV_USB_HOST |
| help |
| Say Y here if you are using an SMDK2416 |
| |
| config MACH_S3C2416_DT |
| bool "Samsung S3C2416 machine using devicetree" |
| select TIMER_OF |
| select USE_OF |
| select PINCTRL |
| select PINCTRL_S3C24XX |
| help |
| Machine support for Samsung S3C2416 machines with device tree enabled. |
| Select this if a fdt blob is available for the S3C2416 SoC based board. |
| Note: This is under development and not all peripherals can be supported |
| with this machine file. |
| |
| endif # CPU_S3C2416 |
| |
| if CPU_S3C2440 || CPU_S3C2442 |
| |
| config S3C2440_XTAL_12000000 |
| bool |
| help |
| Indicate that the build needs to support 12MHz system |
| crystal. |
| |
| config S3C2440_XTAL_16934400 |
| bool |
| help |
| Indicate that the build needs to support 16.9344MHz system |
| crystal. |
| |
| config S3C2440_PLL_12000000 |
| bool |
| depends on ARM_S3C2440_CPUFREQ && S3C2440_XTAL_12000000 |
| default y if S3C24XX_PLL |
| help |
| PLL tables for S3C2440 or S3C2442 CPUs with 12MHz crystals. |
| |
| config S3C2440_PLL_16934400 |
| bool |
| depends on ARM_S3C2440_CPUFREQ && S3C2440_XTAL_16934400 |
| default y if S3C24XX_PLL |
| help |
| PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals. |
| endif |
| |
| if CPU_S3C2440 |
| |
| comment "S3C2440 Boards" |
| |
| # |
| # The "S3C2440 Boards" list is ordered alphabetically by option text. |
| # (without ARCH_ or MACH_) |
| # |
| |
| config MACH_ANUBIS |
| bool "Simtec Electronics ANUBIS" |
| select HAVE_PATA_PLATFORM |
| select S3C2410_COMMON_DCLK |
| select S3C2440_XTAL_12000000 |
| select S3C24XX_SIMTEC_PM if PM |
| select S3C_DEV_USB_HOST |
| help |
| Say Y here if you are using the Simtec Electronics ANUBIS |
| development system |
| |
| config MACH_AT2440EVB |
| bool "Avantech AT2440EVB development board" |
| select S3C_DEV_NAND |
| select S3C_DEV_USB_HOST |
| help |
| Say Y here if you are using the AT2440EVB development board |
| |
| config MACH_MINI2440 |
| bool "MINI2440 development board" |
| select LEDS_CLASS |
| select LEDS_TRIGGERS |
| select LEDS_TRIGGER_BACKLIGHT |
| select NEW_LEDS |
| select S3C_DEV_NAND |
| select S3C_DEV_USB_HOST |
| help |
| Say Y here to select support for the MINI2440. Is a 10cm x 10cm board |
| available via various sources. It can come with a 3.5" or 7" touch LCD. |
| |
| config MACH_NEXCODER_2440 |
| bool "NexVision NEXCODER 2440 Light Board" |
| select S3C2440_XTAL_12000000 |
| select S3C_DEV_NAND |
| select S3C_DEV_USB_HOST |
| help |
| Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board |
| |
| config MACH_OSIRIS |
| bool "Simtec IM2440D20 (OSIRIS) module" |
| select S3C2410_COMMON_DCLK |
| select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ |
| select S3C2440_XTAL_12000000 |
| select S3C24XX_SIMTEC_PM if PM |
| select S3C_DEV_NAND |
| select S3C_DEV_USB_HOST |
| help |
| Say Y here if you are using the Simtec IM2440D20 module, also |
| known as the Osiris. |
| |
| config MACH_OSIRIS_DVS |
| tristate "Simtec IM2440D20 (OSIRIS) Dynamic Voltage Scaling driver" |
| depends on MACH_OSIRIS |
| depends on TPS65010 |
| help |
| Say Y/M here if you want to have dynamic voltage scaling support |
| on the Simtec IM2440D20 (OSIRIS) module via the TPS65011. |
| |
| The DVS driver alters the voltage supplied to the ARM core |
| depending on the frequency it is running at. The driver itself |
| does not do any of the frequency alteration, which is left up |
| to the cpufreq driver. |
| |
| config MACH_RX3715 |
| bool "HP iPAQ rx3715" |
| select PM_H1940 if PM |
| select S3C2440_XTAL_16934400 |
| select S3C_DEV_NAND |
| help |
| Say Y here if you are using the HP iPAQ rx3715. |
| |
| config ARCH_S3C2440 |
| bool "SMDK2440" |
| select S3C2440_XTAL_16934400 |
| select S3C24XX_SMDK |
| select S3C_DEV_NAND |
| select S3C_DEV_USB_HOST |
| help |
| Say Y here if you are using the SMDK2440. |
| |
| config SMDK2440_CPU2440 |
| bool "SMDK2440 with S3C2440 CPU module" |
| default y if ARCH_S3C2440 |
| select S3C2440_XTAL_16934400 |
| |
| endif # CPU_S3C2440 |
| |
| if CPU_S3C2442 |
| |
| comment "S3C2442 Boards" |
| |
| # |
| # The "S3C2442 Boards" list is ordered alphabetically by option text. |
| # (without ARCH_ or MACH_) |
| # |
| |
| config MACH_NEO1973_GTA02 |
| bool "Openmoko GTA02 / Freerunner phone" |
| select I2C |
| select MFD_PCF50633 |
| select PCF50633_GPIO |
| select POWER_SUPPLY |
| select S3C_DEV_USB_HOST |
| help |
| Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone |
| |
| config MACH_RX1950 |
| bool "HP iPAQ rx1950" |
| select I2C |
| select PM_H1940 if PM |
| select S3C2410_COMMON_DCLK |
| select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ |
| select S3C2440_XTAL_16934400 |
| select S3C_DEV_NAND |
| help |
| Say Y here if you're using HP iPAQ rx1950 |
| |
| endif # CPU_S3C2442 |
| |
| if CPU_S3C2443 || CPU_S3C2416 |
| |
| config S3C2443_SETUP_SPI |
| bool |
| help |
| Common setup code for SPI GPIO configurations |
| |
| endif # CPU_S3C2443 || CPU_S3C2416 |
| |
| if CPU_S3C2443 |
| |
| comment "S3C2443 Boards" |
| |
| config MACH_SMDK2443 |
| bool "SMDK2443" |
| select S3C24XX_SMDK |
| select S3C_DEV_HSMMC1 |
| help |
| Say Y here if you are using an SMDK2443 |
| |
| endif # CPU_S3C2443 |
| |
| config PM_H1940 |
| bool |
| help |
| Internal node for H1940 and related PM |
| |
| endmenu # Samsung S3C24XX SoCs Support |
| |
| endif # ARCH_S3C24XX |
