| USB Type-C port devices (eg. /sys/class/typec/port0/) |
| |
| What: /sys/class/typec/<port>/data_role |
| Date: April 2017 |
| Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> |
| Description: |
| The supported USB data roles. This attribute can be used for |
| requesting data role swapping on the port. Swapping is supported |
| as synchronous operation, so write(2) to the attribute will not |
| return until the operation has finished. The attribute is |
| notified about role changes so that poll(2) on the attribute |
| wakes up. Change on the role will also generate uevent |
| KOBJ_CHANGE on the port. The current role is show in brackets, |
| for example "[host] device" when DRP port is in host mode. |
| |
| Valid values: host, device |
| |
| What: /sys/class/typec/<port>/power_role |
| Date: April 2017 |
| Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> |
| Description: |
| The supported power roles. This attribute can be used to request |
| power role swap on the port. Swapping is supported as |
| synchronous operation, so write(2) to the attribute will not |
| return until the operation has finished. The attribute is |
| notified about role changes so that poll(2) on the attribute |
| wakes up. Change on the role will also generate uevent |
| KOBJ_CHANGE. The current role is show in brackets, for example |
| "[source] sink" when in source mode. |
| |
| Valid values: source, sink |
| |
| What: /sys/class/typec/<port>/port_type |
| Date: May 2017 |
| Contact: Badhri Jagan Sridharan <Badhri@google.com> |
| Description: |
| Indicates the type of the port. This attribute can be used for |
| requesting a change in the port type. Port type change is |
| supported as a synchronous operation, so write(2) to the |
| attribute will not return until the operation has finished. |
| |
| Valid values: |
| |
| ====== ============================================== |
| source (The port will behave as source only DFP port) |
| sink (The port will behave as sink only UFP port) |
| dual (The port will behave as dual-role-data and |
| dual-role-power port) |
| ====== ============================================== |
| |
| What: /sys/class/typec/<port>/vconn_source |
| Date: April 2017 |
| Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> |
| Description: |
| Shows is the port VCONN Source. This attribute can be used to |
| request VCONN swap to change the VCONN Source during connection |
| when both the port and the partner support USB Power Delivery. |
| Swapping is supported as synchronous operation, so write(2) to |
| the attribute will not return until the operation has finished. |
| The attribute is notified about VCONN source changes so that |
| poll(2) on the attribute wakes up. Change on VCONN source also |
| generates uevent KOBJ_CHANGE. |
| |
| Valid values: |
| |
| - "no" when the port is not the VCONN Source |
| - "yes" when the port is the VCONN Source |
| |
| What: /sys/class/typec/<port>/power_operation_mode |
| Date: April 2017 |
| Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> |
| Description: |
| Shows the current power operational mode the port is in. The |
| power operation mode means current level for VBUS. In case USB |
| Power Delivery communication is used for negotiating the levels, |
| power operation mode should show "usb_power_delivery". |
| |
| Valid values: |
| |
| - default |
| - 1.5A |
| - 3.0A |
| - usb_power_delivery |
| |
| What: /sys/class/typec/<port>/preferred_role |
| Date: April 2017 |
| Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> |
| Description: |
| The user space can notify the driver about the preferred role. |
| It should be handled as enabling of Try.SRC or Try.SNK, as |
| defined in USB Type-C specification, in the port drivers. By |
| default the preferred role should come from the platform. |
| |
| Valid values: source, sink, none (to remove preference) |
| |
| What: /sys/class/typec/<port>/supported_accessory_modes |
| Date: April 2017 |
| Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> |
| Description: |
| Space separated list of accessory modes, defined in the USB |
| Type-C specification, the port supports. |
| |
| What: /sys/class/typec/<port>/usb_power_delivery_revision |
| Date: April 2017 |
| Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> |
| Description: |
| Revision number of the supported USB Power Delivery |
| specification, or 0 when USB Power Delivery is not supported. |
| |
| What: /sys/class/typec/<port>/usb_typec_revision |
| Date: April 2017 |
| Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> |
| Description: |
| Revision number of the supported USB Type-C specification. |
| |
| What: /sys/class/typec/<port>/orientation |
| Date: February 2020 |
| Contact: Badhri Jagan Sridharan <badhri@google.com> |
| Description: |
| Indicates the active orientation of the Type-C connector. |
| Valid values: |
| - "normal": CC1 orientation |
| - "reverse": CC2 orientation |
| - "unknown": Orientation cannot be determined. |
| |
| USB Type-C partner devices (eg. /sys/class/typec/port0-partner/) |
| |
| What: /sys/class/typec/<port>-partner/accessory_mode |
| Date: April 2017 |
| Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> |
| Description: |
| Shows the Accessory Mode name when the partner is an Accessory. |
| The Accessory Modes are defined in USB Type-C Specification. |
| |
| What: /sys/class/typec/<port>-partner/supports_usb_power_delivery |
| Date: April 2017 |
| Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> |
| Description: |
| Shows if the partner supports USB Power Delivery communication: |
| Valid values: yes, no |
| |
| What: /sys/class/typec/<port>-partner>/identity/ |
| Date: April 2017 |
| Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> |
| Description: |
| This directory appears only if the port device driver is capable |
| of showing the result of Discover Identity USB power delivery |
| command. That will not always be possible even when USB power |
| delivery is supported, for example when USB power delivery |
| communication for the port is mostly handled in firmware. If the |
| directory exists, it will have an attribute file for every VDO |
| in Discover Identity command result. |
| |
| What: /sys/class/typec/<port>-partner/identity/id_header |
| Date: April 2017 |
| Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> |
| Description: |
| ID Header VDO part of Discover Identity command result. The |
| value will show 0 until Discover Identity command result becomes |
| available. The value can be polled. |
| |
| What: /sys/class/typec/<port>-partner/identity/cert_stat |
| Date: April 2017 |
| Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> |
| Description: |
| Cert Stat VDO part of Discover Identity command result. The |
| value will show 0 until Discover Identity command result becomes |
| available. The value can be polled. |
| |
| What: /sys/class/typec/<port>-partner/identity/product |
| Date: April 2017 |
| Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> |
| Description: |
| Product VDO part of Discover Identity command result. The value |
| will show 0 until Discover Identity command result becomes |
| available. The value can be polled. |
| |
| |
| USB Type-C cable devices (eg. /sys/class/typec/port0-cable/) |
| |
| Note: Electronically Marked Cables will have a device also for one cable plug |
| (eg. /sys/class/typec/port0-plug0). If the cable is active and has also SOP |
| Double Prime controller (USB Power Deliver specification ch. 2.4) it will have |
| second device also for the other plug. Both plugs may have alternate modes as |
| described in USB Type-C and USB Power Delivery specifications. |
| |
| What: /sys/class/typec/<port>-cable/type |
| Date: April 2017 |
| Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> |
| Description: |
| Shows if the cable is active. |
| Valid values: active, passive |
| |
| What: /sys/class/typec/<port>-cable/plug_type |
| Date: April 2017 |
| Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> |
| Description: |
| Shows type of the plug on the cable: |
| |
| - type-a - Standard A |
| - type-b - Standard B |
| - type-c |
| - captive |
| |
| What: /sys/class/typec/<port>-cable/identity/ |
| Date: April 2017 |
| Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> |
| Description: |
| This directory appears only if the port device driver is capable |
| of showing the result of Discover Identity USB power delivery |
| command. That will not always be possible even when USB power |
| delivery is supported. If the directory exists, it will have an |
| attribute for every VDO returned by Discover Identity command. |
| |
| What: /sys/class/typec/<port>-cable/identity/id_header |
| Date: April 2017 |
| Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> |
| Description: |
| ID Header VDO part of Discover Identity command result. The |
| value will show 0 until Discover Identity command result becomes |
| available. The value can be polled. |
| |
| What: /sys/class/typec/<port>-cable/identity/cert_stat |
| Date: April 2017 |
| Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> |
| Description: |
| Cert Stat VDO part of Discover Identity command result. The |
| value will show 0 until Discover Identity command result becomes |
| available. The value can be polled. |
| |
| What: /sys/class/typec/<port>-cable/identity/product |
| Date: April 2017 |
| Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> |
| Description: |
| Product VDO part of Discover Identity command result. The value |
| will show 0 until Discover Identity command result becomes |
| available. The value can be polled. |
| |
| |
| USB Type-C port alternate mode devices. |
| |
| What: /sys/class/typec/<port>/<alt mode>/supported_roles |
| Date: April 2017 |
| Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> |
| Description: |
| Space separated list of the supported roles. |
| |
| Valid values: source, sink |
