| /* SPDX-License-Identifier: GPL-2.0 */ |
| /* |
| * Copyright (C) 2020-2022 Loongson Technology Corporation Limited |
| * |
| * Derived from MIPS: |
| * Copyright (C) 1996, 99 Ralf Baechle |
| * Copyright (C) 2000, 2002 Maciej W. Rozycki |
| * Copyright (C) 1990, 1999 by Silicon Graphics, Inc. |
| */ |
| #ifndef _ASM_ADDRSPACE_H |
| #define _ASM_ADDRSPACE_H |
| |
| #include <linux/const.h> |
| |
| #include <asm/loongarch.h> |
| |
| /* |
| * This gives the physical RAM offset. |
| */ |
| #ifndef __ASSEMBLY__ |
| #ifndef PHYS_OFFSET |
| #define PHYS_OFFSET _UL(0) |
| #endif |
| extern unsigned long vm_map_base; |
| #endif /* __ASSEMBLY__ */ |
| |
| #ifndef IO_BASE |
| #define IO_BASE CSR_DMW0_BASE |
| #endif |
| |
| #ifndef CACHE_BASE |
| #define CACHE_BASE CSR_DMW1_BASE |
| #endif |
| |
| #ifndef UNCACHE_BASE |
| #define UNCACHE_BASE CSR_DMW0_BASE |
| #endif |
| |
| #define DMW_PABITS 48 |
| #define TO_PHYS_MASK ((1ULL << DMW_PABITS) - 1) |
| |
| /* |
| * Memory above this physical address will be considered highmem. |
| */ |
| #ifndef HIGHMEM_START |
| #define HIGHMEM_START (_UL(1) << _UL(DMW_PABITS)) |
| #endif |
| |
| #define TO_PHYS(x) ( ((x) & TO_PHYS_MASK)) |
| #define TO_CACHE(x) (CACHE_BASE | ((x) & TO_PHYS_MASK)) |
| #define TO_UNCACHE(x) (UNCACHE_BASE | ((x) & TO_PHYS_MASK)) |
| |
| /* |
| * This handles the memory map. |
| */ |
| #ifndef PAGE_OFFSET |
| #define PAGE_OFFSET (CACHE_BASE + PHYS_OFFSET) |
| #endif |
| |
| #ifndef FIXADDR_TOP |
| #define FIXADDR_TOP ((unsigned long)(long)(int)0xfffe0000) |
| #endif |
| |
| #ifdef __ASSEMBLY__ |
| #define _ATYPE_ |
| #define _ATYPE32_ |
| #define _ATYPE64_ |
| #else |
| #define _ATYPE_ __PTRDIFF_TYPE__ |
| #define _ATYPE32_ int |
| #define _ATYPE64_ __s64 |
| #endif |
| |
| #ifdef CONFIG_64BIT |
| #define _CONST64_(x) _UL(x) |
| #else |
| #define _CONST64_(x) _ULL(x) |
| #endif |
| |
| /* |
| * 32/64-bit LoongArch address spaces |
| */ |
| #ifdef __ASSEMBLY__ |
| #define _ACAST32_ |
| #define _ACAST64_ |
| #else |
| #define _ACAST32_ (_ATYPE_)(_ATYPE32_) /* widen if necessary */ |
| #define _ACAST64_ (_ATYPE64_) /* do _not_ narrow */ |
| #endif |
| |
| #ifdef CONFIG_32BIT |
| |
| #define UVRANGE 0x00000000 |
| #define KPRANGE0 0x80000000 |
| #define KPRANGE1 0xa0000000 |
| #define KVRANGE 0xc0000000 |
| |
| #else |
| |
| #define XUVRANGE _CONST64_(0x0000000000000000) |
| #define XSPRANGE _CONST64_(0x4000000000000000) |
| #define XKPRANGE _CONST64_(0x8000000000000000) |
| #define XKVRANGE _CONST64_(0xc000000000000000) |
| |
| #endif |
| |
| /* |
| * Returns the physical address of a KPRANGEx / XKPRANGE address |
| */ |
| #define PHYSADDR(a) ((_ACAST64_(a)) & TO_PHYS_MASK) |
| |
| /* |
| * On LoongArch, I/O ports mappring is following: |
| * |
| * | .... | |
| * |-----------------------| |
| * | pci io ports(16K~32M) | |
| * |-----------------------| |
| * | isa io ports(0 ~16K) | |
| * PCI_IOBASE ->|-----------------------| |
| * | .... | |
| */ |
| #define PCI_IOBASE ((void __iomem *)(vm_map_base + (2 * PAGE_SIZE))) |
| #define PCI_IOSIZE SZ_32M |
| #define ISA_IOSIZE SZ_16K |
| #define IO_SPACE_LIMIT (PCI_IOSIZE - 1) |
| |
| #define PHYS_LINK_KADDR PHYSADDR(VMLINUX_LOAD_ADDRESS) |
| |
| #endif /* _ASM_ADDRSPACE_H */ |