| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Copyright 2017 IBM Corp. |
| */ |
| |
| #include <linux/bitfield.h> |
| #include <linux/bitops.h> |
| #include <linux/debugfs.h> |
| #include <linux/device.h> |
| #include <linux/fs.h> |
| #include <linux/i2c.h> |
| #include <linux/jiffies.h> |
| #include <linux/leds.h> |
| #include <linux/module.h> |
| #include <linux/mutex.h> |
| #include <linux/of_device.h> |
| #include <linux/pmbus.h> |
| |
| #include "pmbus.h" |
| |
| #define CFFPS_FRU_CMD 0x9A |
| #define CFFPS_PN_CMD 0x9B |
| #define CFFPS_SN_CMD 0x9E |
| #define CFFPS_CCIN_CMD 0xBD |
| #define CFFPS_FW_CMD 0xFA |
| #define CFFPS1_FW_NUM_BYTES 4 |
| #define CFFPS2_FW_NUM_WORDS 3 |
| #define CFFPS_SYS_CONFIG_CMD 0xDA |
| |
| #define CFFPS_INPUT_HISTORY_CMD 0xD6 |
| #define CFFPS_INPUT_HISTORY_SIZE 100 |
| |
| #define CFFPS_CCIN_VERSION GENMASK(15, 8) |
| #define CFFPS_CCIN_VERSION_1 0x2b |
| #define CFFPS_CCIN_VERSION_2 0x2e |
| |
| /* STATUS_MFR_SPECIFIC bits */ |
| #define CFFPS_MFR_FAN_FAULT BIT(0) |
| #define CFFPS_MFR_THERMAL_FAULT BIT(1) |
| #define CFFPS_MFR_OV_FAULT BIT(2) |
| #define CFFPS_MFR_UV_FAULT BIT(3) |
| #define CFFPS_MFR_PS_KILL BIT(4) |
| #define CFFPS_MFR_OC_FAULT BIT(5) |
| #define CFFPS_MFR_VAUX_FAULT BIT(6) |
| #define CFFPS_MFR_CURRENT_SHARE_WARNING BIT(7) |
| |
| /* |
| * LED off state actually relinquishes LED control to PSU firmware, so it can |
| * turn on the LED for faults. |
| */ |
| #define CFFPS_LED_OFF 0 |
| #define CFFPS_LED_BLINK BIT(0) |
| #define CFFPS_LED_ON BIT(1) |
| #define CFFPS_BLINK_RATE_MS 250 |
| |
| enum { |
| CFFPS_DEBUGFS_INPUT_HISTORY = 0, |
| CFFPS_DEBUGFS_FRU, |
| CFFPS_DEBUGFS_PN, |
| CFFPS_DEBUGFS_SN, |
| CFFPS_DEBUGFS_CCIN, |
| CFFPS_DEBUGFS_FW, |
| CFFPS_DEBUGFS_NUM_ENTRIES |
| }; |
| |
| enum versions { cffps1, cffps2, cffps_unknown }; |
| |
| struct ibm_cffps_input_history { |
| struct mutex update_lock; |
| unsigned long last_update; |
| |
| u8 byte_count; |
| u8 data[CFFPS_INPUT_HISTORY_SIZE]; |
| }; |
| |
| struct ibm_cffps { |
| enum versions version; |
| struct i2c_client *client; |
| |
| struct ibm_cffps_input_history input_history; |
| |
| int debugfs_entries[CFFPS_DEBUGFS_NUM_ENTRIES]; |
| |
| char led_name[32]; |
| u8 led_state; |
| struct led_classdev led; |
| }; |
| |
| #define to_psu(x, y) container_of((x), struct ibm_cffps, debugfs_entries[(y)]) |
| |
| static ssize_t ibm_cffps_read_input_history(struct ibm_cffps *psu, |
| char __user *buf, size_t count, |
| loff_t *ppos) |
| { |
| int rc; |
| u8 msgbuf0[1] = { CFFPS_INPUT_HISTORY_CMD }; |
| u8 msgbuf1[CFFPS_INPUT_HISTORY_SIZE + 1] = { 0 }; |
| struct i2c_msg msg[2] = { |
| { |
| .addr = psu->client->addr, |
| .flags = psu->client->flags, |
| .len = 1, |
| .buf = msgbuf0, |
| }, { |
| .addr = psu->client->addr, |
| .flags = psu->client->flags | I2C_M_RD, |
| .len = CFFPS_INPUT_HISTORY_SIZE + 1, |
| .buf = msgbuf1, |
| }, |
| }; |
| |
| if (!*ppos) { |
| mutex_lock(&psu->input_history.update_lock); |
| if (time_after(jiffies, psu->input_history.last_update + HZ)) { |
| /* |
| * Use a raw i2c transfer, since we need more bytes |
| * than Linux I2C supports through smbus xfr (only 32). |
| */ |
| rc = i2c_transfer(psu->client->adapter, msg, 2); |
| if (rc < 0) { |
| mutex_unlock(&psu->input_history.update_lock); |
| return rc; |
| } |
| |
| psu->input_history.byte_count = msgbuf1[0]; |
| memcpy(psu->input_history.data, &msgbuf1[1], |
| CFFPS_INPUT_HISTORY_SIZE); |
| psu->input_history.last_update = jiffies; |
| } |
| |
| mutex_unlock(&psu->input_history.update_lock); |
| } |
| |
| return simple_read_from_buffer(buf, count, ppos, |
| psu->input_history.data, |
| psu->input_history.byte_count); |
| } |
| |
| static ssize_t ibm_cffps_debugfs_op(struct file *file, char __user *buf, |
| size_t count, loff_t *ppos) |
| { |
| u8 cmd; |
| int i, rc; |
| int *idxp = file->private_data; |
| int idx = *idxp; |
| struct ibm_cffps *psu = to_psu(idxp, idx); |
| char data[I2C_SMBUS_BLOCK_MAX] = { 0 }; |
| |
| pmbus_set_page(psu->client, 0); |
| |
| switch (idx) { |
| case CFFPS_DEBUGFS_INPUT_HISTORY: |
| return ibm_cffps_read_input_history(psu, buf, count, ppos); |
| case CFFPS_DEBUGFS_FRU: |
| cmd = CFFPS_FRU_CMD; |
| break; |
| case CFFPS_DEBUGFS_PN: |
| cmd = CFFPS_PN_CMD; |
| break; |
| case CFFPS_DEBUGFS_SN: |
| cmd = CFFPS_SN_CMD; |
| break; |
| case CFFPS_DEBUGFS_CCIN: |
| rc = i2c_smbus_read_word_swapped(psu->client, CFFPS_CCIN_CMD); |
| if (rc < 0) |
| return rc; |
| |
| rc = snprintf(data, 5, "%04X", rc); |
| goto done; |
| case CFFPS_DEBUGFS_FW: |
| switch (psu->version) { |
| case cffps1: |
| for (i = 0; i < CFFPS1_FW_NUM_BYTES; ++i) { |
| rc = i2c_smbus_read_byte_data(psu->client, |
| CFFPS_FW_CMD + |
| i); |
| if (rc < 0) |
| return rc; |
| |
| snprintf(&data[i * 2], 3, "%02X", rc); |
| } |
| |
| rc = i * 2; |
| break; |
| case cffps2: |
| for (i = 0; i < CFFPS2_FW_NUM_WORDS; ++i) { |
| rc = i2c_smbus_read_word_data(psu->client, |
| CFFPS_FW_CMD + |
| i); |
| if (rc < 0) |
| return rc; |
| |
| snprintf(&data[i * 4], 5, "%04X", rc); |
| } |
| |
| rc = i * 4; |
| break; |
| default: |
| return -EOPNOTSUPP; |
| } |
| goto done; |
| default: |
| return -EINVAL; |
| } |
| |
| rc = i2c_smbus_read_block_data(psu->client, cmd, data); |
| if (rc < 0) |
| return rc; |
| |
| done: |
| data[rc] = '\n'; |
| rc += 2; |
| |
| return simple_read_from_buffer(buf, count, ppos, data, rc); |
| } |
| |
| static const struct file_operations ibm_cffps_fops = { |
| .llseek = noop_llseek, |
| .read = ibm_cffps_debugfs_op, |
| .open = simple_open, |
| }; |
| |
| static int ibm_cffps_read_byte_data(struct i2c_client *client, int page, |
| int reg) |
| { |
| int rc, mfr; |
| |
| switch (reg) { |
| case PMBUS_STATUS_VOUT: |
| case PMBUS_STATUS_IOUT: |
| case PMBUS_STATUS_TEMPERATURE: |
| case PMBUS_STATUS_FAN_12: |
| rc = pmbus_read_byte_data(client, page, reg); |
| if (rc < 0) |
| return rc; |
| |
| mfr = pmbus_read_byte_data(client, page, |
| PMBUS_STATUS_MFR_SPECIFIC); |
| if (mfr < 0) |
| /* |
| * Return the status register instead of an error, |
| * since we successfully read status. |
| */ |
| return rc; |
| |
| /* Add MFR_SPECIFIC bits to the standard pmbus status regs. */ |
| if (reg == PMBUS_STATUS_FAN_12) { |
| if (mfr & CFFPS_MFR_FAN_FAULT) |
| rc |= PB_FAN_FAN1_FAULT; |
| } else if (reg == PMBUS_STATUS_TEMPERATURE) { |
| if (mfr & CFFPS_MFR_THERMAL_FAULT) |
| rc |= PB_TEMP_OT_FAULT; |
| } else if (reg == PMBUS_STATUS_VOUT) { |
| if (mfr & (CFFPS_MFR_OV_FAULT | CFFPS_MFR_VAUX_FAULT)) |
| rc |= PB_VOLTAGE_OV_FAULT; |
| if (mfr & CFFPS_MFR_UV_FAULT) |
| rc |= PB_VOLTAGE_UV_FAULT; |
| } else if (reg == PMBUS_STATUS_IOUT) { |
| if (mfr & CFFPS_MFR_OC_FAULT) |
| rc |= PB_IOUT_OC_FAULT; |
| if (mfr & CFFPS_MFR_CURRENT_SHARE_WARNING) |
| rc |= PB_CURRENT_SHARE_FAULT; |
| } |
| break; |
| default: |
| rc = -ENODATA; |
| break; |
| } |
| |
| return rc; |
| } |
| |
| static int ibm_cffps_read_word_data(struct i2c_client *client, int page, |
| int reg) |
| { |
| int rc, mfr; |
| |
| switch (reg) { |
| case PMBUS_STATUS_WORD: |
| rc = pmbus_read_word_data(client, page, reg); |
| if (rc < 0) |
| return rc; |
| |
| mfr = pmbus_read_byte_data(client, page, |
| PMBUS_STATUS_MFR_SPECIFIC); |
| if (mfr < 0) |
| /* |
| * Return the status register instead of an error, |
| * since we successfully read status. |
| */ |
| return rc; |
| |
| if (mfr & CFFPS_MFR_PS_KILL) |
| rc |= PB_STATUS_OFF; |
| break; |
| default: |
| rc = -ENODATA; |
| break; |
| } |
| |
| return rc; |
| } |
| |
| static int ibm_cffps_led_brightness_set(struct led_classdev *led_cdev, |
| enum led_brightness brightness) |
| { |
| int rc; |
| u8 next_led_state; |
| struct ibm_cffps *psu = container_of(led_cdev, struct ibm_cffps, led); |
| |
| if (brightness == LED_OFF) { |
| next_led_state = CFFPS_LED_OFF; |
| } else { |
| brightness = LED_FULL; |
| |
| if (psu->led_state != CFFPS_LED_BLINK) |
| next_led_state = CFFPS_LED_ON; |
| else |
| next_led_state = CFFPS_LED_BLINK; |
| } |
| |
| dev_dbg(&psu->client->dev, "LED brightness set: %d. Command: %d.\n", |
| brightness, next_led_state); |
| |
| pmbus_set_page(psu->client, 0); |
| |
| rc = i2c_smbus_write_byte_data(psu->client, CFFPS_SYS_CONFIG_CMD, |
| next_led_state); |
| if (rc < 0) |
| return rc; |
| |
| psu->led_state = next_led_state; |
| led_cdev->brightness = brightness; |
| |
| return 0; |
| } |
| |
| static int ibm_cffps_led_blink_set(struct led_classdev *led_cdev, |
| unsigned long *delay_on, |
| unsigned long *delay_off) |
| { |
| int rc; |
| struct ibm_cffps *psu = container_of(led_cdev, struct ibm_cffps, led); |
| |
| dev_dbg(&psu->client->dev, "LED blink set.\n"); |
| |
| pmbus_set_page(psu->client, 0); |
| |
| rc = i2c_smbus_write_byte_data(psu->client, CFFPS_SYS_CONFIG_CMD, |
| CFFPS_LED_BLINK); |
| if (rc < 0) |
| return rc; |
| |
| psu->led_state = CFFPS_LED_BLINK; |
| led_cdev->brightness = LED_FULL; |
| *delay_on = CFFPS_BLINK_RATE_MS; |
| *delay_off = CFFPS_BLINK_RATE_MS; |
| |
| return 0; |
| } |
| |
| static void ibm_cffps_create_led_class(struct ibm_cffps *psu) |
| { |
| int rc; |
| struct i2c_client *client = psu->client; |
| struct device *dev = &client->dev; |
| |
| snprintf(psu->led_name, sizeof(psu->led_name), "%s-%02x", client->name, |
| client->addr); |
| psu->led.name = psu->led_name; |
| psu->led.max_brightness = LED_FULL; |
| psu->led.brightness_set_blocking = ibm_cffps_led_brightness_set; |
| psu->led.blink_set = ibm_cffps_led_blink_set; |
| |
| rc = devm_led_classdev_register(dev, &psu->led); |
| if (rc) |
| dev_warn(dev, "failed to register led class: %d\n", rc); |
| } |
| |
| static struct pmbus_driver_info ibm_cffps_info[] = { |
| [cffps1] = { |
| .pages = 1, |
| .func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | PMBUS_HAVE_IOUT | |
| PMBUS_HAVE_PIN | PMBUS_HAVE_FAN12 | PMBUS_HAVE_TEMP | |
| PMBUS_HAVE_TEMP2 | PMBUS_HAVE_TEMP3 | |
| PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_STATUS_IOUT | |
| PMBUS_HAVE_STATUS_INPUT | PMBUS_HAVE_STATUS_TEMP | |
| PMBUS_HAVE_STATUS_FAN12, |
| .read_byte_data = ibm_cffps_read_byte_data, |
| .read_word_data = ibm_cffps_read_word_data, |
| }, |
| [cffps2] = { |
| .pages = 2, |
| .func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | PMBUS_HAVE_IOUT | |
| PMBUS_HAVE_PIN | PMBUS_HAVE_FAN12 | PMBUS_HAVE_TEMP | |
| PMBUS_HAVE_TEMP2 | PMBUS_HAVE_TEMP3 | |
| PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_STATUS_IOUT | |
| PMBUS_HAVE_STATUS_INPUT | PMBUS_HAVE_STATUS_TEMP | |
| PMBUS_HAVE_STATUS_FAN12, |
| .func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_IOUT | |
| PMBUS_HAVE_TEMP | PMBUS_HAVE_TEMP2 | PMBUS_HAVE_TEMP3 | |
| PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_STATUS_IOUT, |
| .read_byte_data = ibm_cffps_read_byte_data, |
| .read_word_data = ibm_cffps_read_word_data, |
| }, |
| }; |
| |
| static struct pmbus_platform_data ibm_cffps_pdata = { |
| .flags = PMBUS_SKIP_STATUS_CHECK, |
| }; |
| |
| static int ibm_cffps_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| int i, rc; |
| enum versions vs = cffps_unknown; |
| struct dentry *debugfs; |
| struct dentry *ibm_cffps_dir; |
| struct ibm_cffps *psu; |
| const void *md = of_device_get_match_data(&client->dev); |
| |
| if (md) |
| vs = (enum versions)md; |
| else if (id) |
| vs = (enum versions)id->driver_data; |
| |
| if (vs == cffps_unknown) { |
| u16 ccin_version = CFFPS_CCIN_VERSION_1; |
| int ccin = i2c_smbus_read_word_swapped(client, CFFPS_CCIN_CMD); |
| |
| if (ccin > 0) |
| ccin_version = FIELD_GET(CFFPS_CCIN_VERSION, ccin); |
| |
| switch (ccin_version) { |
| default: |
| case CFFPS_CCIN_VERSION_1: |
| vs = cffps1; |
| break; |
| case CFFPS_CCIN_VERSION_2: |
| vs = cffps2; |
| break; |
| } |
| |
| /* Set the client name to include the version number. */ |
| snprintf(client->name, I2C_NAME_SIZE, "cffps%d", vs + 1); |
| } |
| |
| client->dev.platform_data = &ibm_cffps_pdata; |
| rc = pmbus_do_probe(client, id, &ibm_cffps_info[vs]); |
| if (rc) |
| return rc; |
| |
| /* |
| * Don't fail the probe if there isn't enough memory for leds and |
| * debugfs. |
| */ |
| psu = devm_kzalloc(&client->dev, sizeof(*psu), GFP_KERNEL); |
| if (!psu) |
| return 0; |
| |
| psu->version = vs; |
| psu->client = client; |
| mutex_init(&psu->input_history.update_lock); |
| psu->input_history.last_update = jiffies - HZ; |
| |
| ibm_cffps_create_led_class(psu); |
| |
| /* Don't fail the probe if we can't create debugfs */ |
| debugfs = pmbus_get_debugfs_dir(client); |
| if (!debugfs) |
| return 0; |
| |
| ibm_cffps_dir = debugfs_create_dir(client->name, debugfs); |
| if (!ibm_cffps_dir) |
| return 0; |
| |
| for (i = 0; i < CFFPS_DEBUGFS_NUM_ENTRIES; ++i) |
| psu->debugfs_entries[i] = i; |
| |
| debugfs_create_file("input_history", 0444, ibm_cffps_dir, |
| &psu->debugfs_entries[CFFPS_DEBUGFS_INPUT_HISTORY], |
| &ibm_cffps_fops); |
| debugfs_create_file("fru", 0444, ibm_cffps_dir, |
| &psu->debugfs_entries[CFFPS_DEBUGFS_FRU], |
| &ibm_cffps_fops); |
| debugfs_create_file("part_number", 0444, ibm_cffps_dir, |
| &psu->debugfs_entries[CFFPS_DEBUGFS_PN], |
| &ibm_cffps_fops); |
| debugfs_create_file("serial_number", 0444, ibm_cffps_dir, |
| &psu->debugfs_entries[CFFPS_DEBUGFS_SN], |
| &ibm_cffps_fops); |
| debugfs_create_file("ccin", 0444, ibm_cffps_dir, |
| &psu->debugfs_entries[CFFPS_DEBUGFS_CCIN], |
| &ibm_cffps_fops); |
| debugfs_create_file("fw_version", 0444, ibm_cffps_dir, |
| &psu->debugfs_entries[CFFPS_DEBUGFS_FW], |
| &ibm_cffps_fops); |
| |
| return 0; |
| } |
| |
| static const struct i2c_device_id ibm_cffps_id[] = { |
| { "ibm_cffps1", cffps1 }, |
| { "ibm_cffps2", cffps2 }, |
| { "ibm_cffps", cffps_unknown }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(i2c, ibm_cffps_id); |
| |
| static const struct of_device_id ibm_cffps_of_match[] = { |
| { |
| .compatible = "ibm,cffps1", |
| .data = (void *)cffps1 |
| }, |
| { |
| .compatible = "ibm,cffps2", |
| .data = (void *)cffps2 |
| }, |
| { |
| .compatible = "ibm,cffps", |
| .data = (void *)cffps_unknown |
| }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(of, ibm_cffps_of_match); |
| |
| static struct i2c_driver ibm_cffps_driver = { |
| .driver = { |
| .name = "ibm-cffps", |
| .of_match_table = ibm_cffps_of_match, |
| }, |
| .probe = ibm_cffps_probe, |
| .remove = pmbus_do_remove, |
| .id_table = ibm_cffps_id, |
| }; |
| |
| module_i2c_driver(ibm_cffps_driver); |
| |
| MODULE_AUTHOR("Eddie James"); |
| MODULE_DESCRIPTION("PMBus driver for IBM Common Form Factor power supplies"); |
| MODULE_LICENSE("GPL"); |