| /* SPDX-License-Identifier: GPL-2.0 */ |
| /* |
| * debug.h - DesignWare USB3 DRD Controller Debug Header |
| * |
| * Copyright (C) 2010-2011 Texas Instruments Incorporated - https://www.ti.com |
| * |
| * Authors: Felipe Balbi <balbi@ti.com>, |
| * Sebastian Andrzej Siewior <bigeasy@linutronix.de> |
| */ |
| |
| #ifndef __DWC3_DEBUG_H |
| #define __DWC3_DEBUG_H |
| |
| #include "core.h" |
| |
| /** |
| * dwc3_gadget_ep_cmd_string - returns endpoint command string |
| * @cmd: command code |
| */ |
| static inline const char * |
| dwc3_gadget_ep_cmd_string(u8 cmd) |
| { |
| switch (cmd) { |
| case DWC3_DEPCMD_DEPSTARTCFG: |
| return "Start New Configuration"; |
| case DWC3_DEPCMD_ENDTRANSFER: |
| return "End Transfer"; |
| case DWC3_DEPCMD_UPDATETRANSFER: |
| return "Update Transfer"; |
| case DWC3_DEPCMD_STARTTRANSFER: |
| return "Start Transfer"; |
| case DWC3_DEPCMD_CLEARSTALL: |
| return "Clear Stall"; |
| case DWC3_DEPCMD_SETSTALL: |
| return "Set Stall"; |
| case DWC3_DEPCMD_GETEPSTATE: |
| return "Get Endpoint State"; |
| case DWC3_DEPCMD_SETTRANSFRESOURCE: |
| return "Set Endpoint Transfer Resource"; |
| case DWC3_DEPCMD_SETEPCONFIG: |
| return "Set Endpoint Configuration"; |
| default: |
| return "UNKNOWN command"; |
| } |
| } |
| |
| /** |
| * dwc3_gadget_generic_cmd_string - returns generic command string |
| * @cmd: command code |
| */ |
| static inline const char * |
| dwc3_gadget_generic_cmd_string(u8 cmd) |
| { |
| switch (cmd) { |
| case DWC3_DGCMD_SET_LMP: |
| return "Set LMP"; |
| case DWC3_DGCMD_SET_PERIODIC_PAR: |
| return "Set Periodic Parameters"; |
| case DWC3_DGCMD_XMIT_FUNCTION: |
| return "Transmit Function Wake Device Notification"; |
| case DWC3_DGCMD_SET_SCRATCHPAD_ADDR_LO: |
| return "Set Scratchpad Buffer Array Address Lo"; |
| case DWC3_DGCMD_SET_SCRATCHPAD_ADDR_HI: |
| return "Set Scratchpad Buffer Array Address Hi"; |
| case DWC3_DGCMD_SELECTED_FIFO_FLUSH: |
| return "Selected FIFO Flush"; |
| case DWC3_DGCMD_ALL_FIFO_FLUSH: |
| return "All FIFO Flush"; |
| case DWC3_DGCMD_SET_ENDPOINT_NRDY: |
| return "Set Endpoint NRDY"; |
| case DWC3_DGCMD_SET_ENDPOINT_PRIME: |
| return "Set Endpoint Prime"; |
| case DWC3_DGCMD_RUN_SOC_BUS_LOOPBACK: |
| return "Run SoC Bus Loopback Test"; |
| default: |
| return "UNKNOWN"; |
| } |
| } |
| |
| /** |
| * dwc3_gadget_link_string - returns link name |
| * @link_state: link state code |
| */ |
| static inline const char * |
| dwc3_gadget_link_string(enum dwc3_link_state link_state) |
| { |
| switch (link_state) { |
| case DWC3_LINK_STATE_U0: |
| return "U0"; |
| case DWC3_LINK_STATE_U1: |
| return "U1"; |
| case DWC3_LINK_STATE_U2: |
| return "U2"; |
| case DWC3_LINK_STATE_U3: |
| return "U3"; |
| case DWC3_LINK_STATE_SS_DIS: |
| return "SS.Disabled"; |
| case DWC3_LINK_STATE_RX_DET: |
| return "RX.Detect"; |
| case DWC3_LINK_STATE_SS_INACT: |
| return "SS.Inactive"; |
| case DWC3_LINK_STATE_POLL: |
| return "Polling"; |
| case DWC3_LINK_STATE_RECOV: |
| return "Recovery"; |
| case DWC3_LINK_STATE_HRESET: |
| return "Hot Reset"; |
| case DWC3_LINK_STATE_CMPLY: |
| return "Compliance"; |
| case DWC3_LINK_STATE_LPBK: |
| return "Loopback"; |
| case DWC3_LINK_STATE_RESET: |
| return "Reset"; |
| case DWC3_LINK_STATE_RESUME: |
| return "Resume"; |
| default: |
| return "UNKNOWN link state"; |
| } |
| } |
| |
| /** |
| * dwc3_gadget_hs_link_string - returns highspeed and below link name |
| * @link_state: link state code |
| */ |
| static inline const char * |
| dwc3_gadget_hs_link_string(enum dwc3_link_state link_state) |
| { |
| switch (link_state) { |
| case DWC3_LINK_STATE_U0: |
| return "On"; |
| case DWC3_LINK_STATE_U2: |
| return "Sleep"; |
| case DWC3_LINK_STATE_U3: |
| return "Suspend"; |
| case DWC3_LINK_STATE_SS_DIS: |
| return "Disconnected"; |
| case DWC3_LINK_STATE_RX_DET: |
| return "Early Suspend"; |
| case DWC3_LINK_STATE_RECOV: |
| return "Recovery"; |
| case DWC3_LINK_STATE_RESET: |
| return "Reset"; |
| case DWC3_LINK_STATE_RESUME: |
| return "Resume"; |
| default: |
| return "UNKNOWN link state"; |
| } |
| } |
| |
| /** |
| * dwc3_trb_type_string - returns TRB type as a string |
| * @type: the type of the TRB |
| */ |
| static inline const char *dwc3_trb_type_string(unsigned int type) |
| { |
| switch (type) { |
| case DWC3_TRBCTL_NORMAL: |
| return "normal"; |
| case DWC3_TRBCTL_CONTROL_SETUP: |
| return "setup"; |
| case DWC3_TRBCTL_CONTROL_STATUS2: |
| return "status2"; |
| case DWC3_TRBCTL_CONTROL_STATUS3: |
| return "status3"; |
| case DWC3_TRBCTL_CONTROL_DATA: |
| return "data"; |
| case DWC3_TRBCTL_ISOCHRONOUS_FIRST: |
| return "isoc-first"; |
| case DWC3_TRBCTL_ISOCHRONOUS: |
| return "isoc"; |
| case DWC3_TRBCTL_LINK_TRB: |
| return "link"; |
| default: |
| return "UNKNOWN"; |
| } |
| } |
| |
| static inline const char *dwc3_ep0_state_string(enum dwc3_ep0_state state) |
| { |
| switch (state) { |
| case EP0_UNCONNECTED: |
| return "Unconnected"; |
| case EP0_SETUP_PHASE: |
| return "Setup Phase"; |
| case EP0_DATA_PHASE: |
| return "Data Phase"; |
| case EP0_STATUS_PHASE: |
| return "Status Phase"; |
| default: |
| return "UNKNOWN"; |
| } |
| } |
| |
| /** |
| * dwc3_gadget_event_string - returns event name |
| * @event: the event code |
| */ |
| static inline const char *dwc3_gadget_event_string(char *str, size_t size, |
| const struct dwc3_event_devt *event) |
| { |
| enum dwc3_link_state state = event->event_info & DWC3_LINK_STATE_MASK; |
| |
| switch (event->type) { |
| case DWC3_DEVICE_EVENT_DISCONNECT: |
| snprintf(str, size, "Disconnect: [%s]", |
| dwc3_gadget_link_string(state)); |
| break; |
| case DWC3_DEVICE_EVENT_RESET: |
| snprintf(str, size, "Reset [%s]", |
| dwc3_gadget_link_string(state)); |
| break; |
| case DWC3_DEVICE_EVENT_CONNECT_DONE: |
| snprintf(str, size, "Connection Done [%s]", |
| dwc3_gadget_link_string(state)); |
| break; |
| case DWC3_DEVICE_EVENT_LINK_STATUS_CHANGE: |
| snprintf(str, size, "Link Change [%s]", |
| dwc3_gadget_link_string(state)); |
| break; |
| case DWC3_DEVICE_EVENT_WAKEUP: |
| snprintf(str, size, "WakeUp [%s]", |
| dwc3_gadget_link_string(state)); |
| break; |
| case DWC3_DEVICE_EVENT_SUSPEND: |
| snprintf(str, size, "Suspend [%s]", |
| dwc3_gadget_link_string(state)); |
| break; |
| case DWC3_DEVICE_EVENT_SOF: |
| snprintf(str, size, "Start-Of-Frame [%s]", |
| dwc3_gadget_link_string(state)); |
| break; |
| case DWC3_DEVICE_EVENT_ERRATIC_ERROR: |
| snprintf(str, size, "Erratic Error [%s]", |
| dwc3_gadget_link_string(state)); |
| break; |
| case DWC3_DEVICE_EVENT_CMD_CMPL: |
| snprintf(str, size, "Command Complete [%s]", |
| dwc3_gadget_link_string(state)); |
| break; |
| case DWC3_DEVICE_EVENT_OVERFLOW: |
| snprintf(str, size, "Overflow [%s]", |
| dwc3_gadget_link_string(state)); |
| break; |
| default: |
| snprintf(str, size, "UNKNOWN"); |
| } |
| |
| return str; |
| } |
| |
| /** |
| * dwc3_ep_event_string - returns event name |
| * @event: then event code |
| */ |
| static inline const char *dwc3_ep_event_string(char *str, size_t size, |
| const struct dwc3_event_depevt *event, u32 ep0state) |
| { |
| u8 epnum = event->endpoint_number; |
| size_t len; |
| int status; |
| |
| len = scnprintf(str, size, "ep%d%s: ", epnum >> 1, |
| (epnum & 1) ? "in" : "out"); |
| |
| status = event->status; |
| |
| switch (event->endpoint_event) { |
| case DWC3_DEPEVT_XFERCOMPLETE: |
| len += scnprintf(str + len, size - len, |
| "Transfer Complete (%c%c%c)", |
| status & DEPEVT_STATUS_SHORT ? 'S' : 's', |
| status & DEPEVT_STATUS_IOC ? 'I' : 'i', |
| status & DEPEVT_STATUS_LST ? 'L' : 'l'); |
| |
| if (epnum <= 1) |
| scnprintf(str + len, size - len, " [%s]", |
| dwc3_ep0_state_string(ep0state)); |
| break; |
| case DWC3_DEPEVT_XFERINPROGRESS: |
| scnprintf(str + len, size - len, |
| "Transfer In Progress [%08x] (%c%c%c)", |
| event->parameters, |
| status & DEPEVT_STATUS_SHORT ? 'S' : 's', |
| status & DEPEVT_STATUS_IOC ? 'I' : 'i', |
| status & DEPEVT_STATUS_LST ? 'M' : 'm'); |
| break; |
| case DWC3_DEPEVT_XFERNOTREADY: |
| len += scnprintf(str + len, size - len, |
| "Transfer Not Ready [%08x]%s", |
| event->parameters, |
| status & DEPEVT_STATUS_TRANSFER_ACTIVE ? |
| " (Active)" : " (Not Active)"); |
| |
| /* Control Endpoints */ |
| if (epnum <= 1) { |
| int phase = DEPEVT_STATUS_CONTROL_PHASE(event->status); |
| |
| switch (phase) { |
| case DEPEVT_STATUS_CONTROL_DATA: |
| scnprintf(str + len, size - len, |
| " [Data Phase]"); |
| break; |
| case DEPEVT_STATUS_CONTROL_STATUS: |
| scnprintf(str + len, size - len, |
| " [Status Phase]"); |
| } |
| } |
| break; |
| case DWC3_DEPEVT_RXTXFIFOEVT: |
| scnprintf(str + len, size - len, "FIFO"); |
| break; |
| case DWC3_DEPEVT_STREAMEVT: |
| status = event->status; |
| |
| switch (status) { |
| case DEPEVT_STREAMEVT_FOUND: |
| scnprintf(str + len, size - len, " Stream %d Found", |
| event->parameters); |
| break; |
| case DEPEVT_STREAMEVT_NOTFOUND: |
| default: |
| scnprintf(str + len, size - len, " Stream Not Found"); |
| break; |
| } |
| |
| break; |
| case DWC3_DEPEVT_EPCMDCMPLT: |
| scnprintf(str + len, size - len, "Endpoint Command Complete"); |
| break; |
| default: |
| scnprintf(str + len, size - len, "UNKNOWN"); |
| } |
| |
| return str; |
| } |
| |
| /** |
| * dwc3_gadget_event_type_string - return event name |
| * @event: the event code |
| */ |
| static inline const char *dwc3_gadget_event_type_string(u8 event) |
| { |
| switch (event) { |
| case DWC3_DEVICE_EVENT_DISCONNECT: |
| return "Disconnect"; |
| case DWC3_DEVICE_EVENT_RESET: |
| return "Reset"; |
| case DWC3_DEVICE_EVENT_CONNECT_DONE: |
| return "Connect Done"; |
| case DWC3_DEVICE_EVENT_LINK_STATUS_CHANGE: |
| return "Link Status Change"; |
| case DWC3_DEVICE_EVENT_WAKEUP: |
| return "Wake-Up"; |
| case DWC3_DEVICE_EVENT_HIBER_REQ: |
| return "Hibernation"; |
| case DWC3_DEVICE_EVENT_SUSPEND: |
| return "Suspend"; |
| case DWC3_DEVICE_EVENT_SOF: |
| return "Start of Frame"; |
| case DWC3_DEVICE_EVENT_ERRATIC_ERROR: |
| return "Erratic Error"; |
| case DWC3_DEVICE_EVENT_CMD_CMPL: |
| return "Command Complete"; |
| case DWC3_DEVICE_EVENT_OVERFLOW: |
| return "Overflow"; |
| default: |
| return "UNKNOWN"; |
| } |
| } |
| |
| static inline const char *dwc3_decode_event(char *str, size_t size, u32 event, |
| u32 ep0state) |
| { |
| union dwc3_event evt; |
| |
| memcpy(&evt, &event, sizeof(event)); |
| |
| if (evt.type.is_devspec) |
| return dwc3_gadget_event_string(str, size, &evt.devt); |
| else |
| return dwc3_ep_event_string(str, size, &evt.depevt, ep0state); |
| } |
| |
| static inline const char *dwc3_ep_cmd_status_string(int status) |
| { |
| switch (status) { |
| case -ETIMEDOUT: |
| return "Timed Out"; |
| case 0: |
| return "Successful"; |
| case DEPEVT_TRANSFER_NO_RESOURCE: |
| return "No Resource"; |
| case DEPEVT_TRANSFER_BUS_EXPIRY: |
| return "Bus Expiry"; |
| default: |
| return "UNKNOWN"; |
| } |
| } |
| |
| static inline const char *dwc3_gadget_generic_cmd_status_string(int status) |
| { |
| switch (status) { |
| case -ETIMEDOUT: |
| return "Timed Out"; |
| case 0: |
| return "Successful"; |
| case 1: |
| return "Error"; |
| default: |
| return "UNKNOWN"; |
| } |
| } |
| |
| |
| #ifdef CONFIG_DEBUG_FS |
| extern void dwc3_debugfs_create_endpoint_dir(struct dwc3_ep *dep); |
| extern void dwc3_debugfs_remove_endpoint_dir(struct dwc3_ep *dep); |
| extern void dwc3_debugfs_init(struct dwc3 *d); |
| extern void dwc3_debugfs_exit(struct dwc3 *d); |
| #else |
| static inline void dwc3_debugfs_create_endpoint_dir(struct dwc3_ep *dep) |
| { } |
| static inline void dwc3_debugfs_remove_endpoint_dir(struct dwc3_ep *dep) |
| { } |
| static inline void dwc3_debugfs_init(struct dwc3 *d) |
| { } |
| static inline void dwc3_debugfs_exit(struct dwc3 *d) |
| { } |
| #endif |
| #endif /* __DWC3_DEBUG_H */ |