| /* |
| * wm8350.c -- Voltage and current regulation for the Wolfson WM8350 PMIC |
| * |
| * Copyright 2007, 2008 Wolfson Microelectronics PLC. |
| * |
| * Author: Liam Girdwood |
| * linux@wolfsonmicro.com |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/init.h> |
| #include <linux/bitops.h> |
| #include <linux/err.h> |
| #include <linux/i2c.h> |
| #include <linux/mfd/wm8350/core.h> |
| #include <linux/mfd/wm8350/pmic.h> |
| #include <linux/platform_device.h> |
| #include <linux/regulator/driver.h> |
| #include <linux/regulator/machine.h> |
| |
| /* Maximum value possible for VSEL */ |
| #define WM8350_DCDC_MAX_VSEL 0x66 |
| |
| /* Microamps */ |
| static const int isink_cur[] = { |
| 4, |
| 5, |
| 6, |
| 7, |
| 8, |
| 10, |
| 11, |
| 14, |
| 16, |
| 19, |
| 23, |
| 27, |
| 32, |
| 39, |
| 46, |
| 54, |
| 65, |
| 77, |
| 92, |
| 109, |
| 130, |
| 154, |
| 183, |
| 218, |
| 259, |
| 308, |
| 367, |
| 436, |
| 518, |
| 616, |
| 733, |
| 872, |
| 1037, |
| 1233, |
| 1466, |
| 1744, |
| 2073, |
| 2466, |
| 2933, |
| 3487, |
| 4147, |
| 4932, |
| 5865, |
| 6975, |
| 8294, |
| 9864, |
| 11730, |
| 13949, |
| 16589, |
| 19728, |
| 23460, |
| 27899, |
| 33178, |
| 39455, |
| 46920, |
| 55798, |
| 66355, |
| 78910, |
| 93840, |
| 111596, |
| 132710, |
| 157820, |
| 187681, |
| 223191 |
| }; |
| |
| static int get_isink_val(int min_uA, int max_uA, u16 *setting) |
| { |
| int i; |
| |
| for (i = ARRAY_SIZE(isink_cur) - 1; i >= 0; i--) { |
| if (min_uA <= isink_cur[i] && max_uA >= isink_cur[i]) { |
| *setting = i; |
| return 0; |
| } |
| } |
| return -EINVAL; |
| } |
| |
| static inline int wm8350_ldo_val_to_mvolts(unsigned int val) |
| { |
| if (val < 16) |
| return (val * 50) + 900; |
| else |
| return ((val - 16) * 100) + 1800; |
| |
| } |
| |
| static inline unsigned int wm8350_ldo_mvolts_to_val(int mV) |
| { |
| if (mV < 1800) |
| return (mV - 900) / 50; |
| else |
| return ((mV - 1800) / 100) + 16; |
| } |
| |
| static inline int wm8350_dcdc_val_to_mvolts(unsigned int val) |
| { |
| return (val * 25) + 850; |
| } |
| |
| static inline unsigned int wm8350_dcdc_mvolts_to_val(int mV) |
| { |
| return (mV - 850) / 25; |
| } |
| |
| static int wm8350_isink_set_current(struct regulator_dev *rdev, int min_uA, |
| int max_uA) |
| { |
| struct wm8350 *wm8350 = rdev_get_drvdata(rdev); |
| int isink = rdev_get_id(rdev); |
| u16 val, setting; |
| int ret; |
| |
| ret = get_isink_val(min_uA, max_uA, &setting); |
| if (ret != 0) |
| return ret; |
| |
| switch (isink) { |
| case WM8350_ISINK_A: |
| val = wm8350_reg_read(wm8350, WM8350_CURRENT_SINK_DRIVER_A) & |
| ~WM8350_CS1_ISEL_MASK; |
| wm8350_reg_write(wm8350, WM8350_CURRENT_SINK_DRIVER_A, |
| val | setting); |
| break; |
| case WM8350_ISINK_B: |
| val = wm8350_reg_read(wm8350, WM8350_CURRENT_SINK_DRIVER_B) & |
| ~WM8350_CS1_ISEL_MASK; |
| wm8350_reg_write(wm8350, WM8350_CURRENT_SINK_DRIVER_B, |
| val | setting); |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int wm8350_isink_get_current(struct regulator_dev *rdev) |
| { |
| struct wm8350 *wm8350 = rdev_get_drvdata(rdev); |
| int isink = rdev_get_id(rdev); |
| u16 val; |
| |
| switch (isink) { |
| case WM8350_ISINK_A: |
| val = wm8350_reg_read(wm8350, WM8350_CURRENT_SINK_DRIVER_A) & |
| WM8350_CS1_ISEL_MASK; |
| break; |
| case WM8350_ISINK_B: |
| val = wm8350_reg_read(wm8350, WM8350_CURRENT_SINK_DRIVER_B) & |
| WM8350_CS1_ISEL_MASK; |
| break; |
| default: |
| return 0; |
| } |
| |
| return (isink_cur[val] + 50) / 100; |
| } |
| |
| /* turn on ISINK followed by DCDC */ |
| static int wm8350_isink_enable(struct regulator_dev *rdev) |
| { |
| struct wm8350 *wm8350 = rdev_get_drvdata(rdev); |
| int isink = rdev_get_id(rdev); |
| |
| switch (isink) { |
| case WM8350_ISINK_A: |
| switch (wm8350->pmic.isink_A_dcdc) { |
| case WM8350_DCDC_2: |
| case WM8350_DCDC_5: |
| wm8350_set_bits(wm8350, WM8350_POWER_MGMT_7, |
| WM8350_CS1_ENA); |
| wm8350_set_bits(wm8350, WM8350_CSA_FLASH_CONTROL, |
| WM8350_CS1_DRIVE); |
| wm8350_set_bits(wm8350, WM8350_DCDC_LDO_REQUESTED, |
| 1 << (wm8350->pmic.isink_A_dcdc - |
| WM8350_DCDC_1)); |
| break; |
| default: |
| return -EINVAL; |
| } |
| break; |
| case WM8350_ISINK_B: |
| switch (wm8350->pmic.isink_B_dcdc) { |
| case WM8350_DCDC_2: |
| case WM8350_DCDC_5: |
| wm8350_set_bits(wm8350, WM8350_POWER_MGMT_7, |
| WM8350_CS2_ENA); |
| wm8350_set_bits(wm8350, WM8350_CSB_FLASH_CONTROL, |
| WM8350_CS2_DRIVE); |
| wm8350_set_bits(wm8350, WM8350_DCDC_LDO_REQUESTED, |
| 1 << (wm8350->pmic.isink_B_dcdc - |
| WM8350_DCDC_1)); |
| break; |
| default: |
| return -EINVAL; |
| } |
| break; |
| default: |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| static int wm8350_isink_disable(struct regulator_dev *rdev) |
| { |
| struct wm8350 *wm8350 = rdev_get_drvdata(rdev); |
| int isink = rdev_get_id(rdev); |
| |
| switch (isink) { |
| case WM8350_ISINK_A: |
| switch (wm8350->pmic.isink_A_dcdc) { |
| case WM8350_DCDC_2: |
| case WM8350_DCDC_5: |
| wm8350_clear_bits(wm8350, WM8350_DCDC_LDO_REQUESTED, |
| 1 << (wm8350->pmic.isink_A_dcdc - |
| WM8350_DCDC_1)); |
| wm8350_clear_bits(wm8350, WM8350_POWER_MGMT_7, |
| WM8350_CS1_ENA); |
| break; |
| default: |
| return -EINVAL; |
| } |
| break; |
| case WM8350_ISINK_B: |
| switch (wm8350->pmic.isink_B_dcdc) { |
| case WM8350_DCDC_2: |
| case WM8350_DCDC_5: |
| wm8350_clear_bits(wm8350, WM8350_DCDC_LDO_REQUESTED, |
| 1 << (wm8350->pmic.isink_B_dcdc - |
| WM8350_DCDC_1)); |
| wm8350_clear_bits(wm8350, WM8350_POWER_MGMT_7, |
| WM8350_CS2_ENA); |
| break; |
| default: |
| return -EINVAL; |
| } |
| break; |
| default: |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| static int wm8350_isink_is_enabled(struct regulator_dev *rdev) |
| { |
| struct wm8350 *wm8350 = rdev_get_drvdata(rdev); |
| int isink = rdev_get_id(rdev); |
| |
| switch (isink) { |
| case WM8350_ISINK_A: |
| return wm8350_reg_read(wm8350, WM8350_CURRENT_SINK_DRIVER_A) & |
| 0x8000; |
| case WM8350_ISINK_B: |
| return wm8350_reg_read(wm8350, WM8350_CURRENT_SINK_DRIVER_B) & |
| 0x8000; |
| } |
| return -EINVAL; |
| } |
| |
| int wm8350_isink_set_flash(struct wm8350 *wm8350, int isink, u16 mode, |
| u16 trigger, u16 duration, u16 on_ramp, u16 off_ramp, |
| u16 drive) |
| { |
| switch (isink) { |
| case WM8350_ISINK_A: |
| wm8350_reg_write(wm8350, WM8350_CSA_FLASH_CONTROL, |
| (mode ? WM8350_CS1_FLASH_MODE : 0) | |
| (trigger ? WM8350_CS1_TRIGSRC : 0) | |
| duration | on_ramp | off_ramp | drive); |
| break; |
| case WM8350_ISINK_B: |
| wm8350_reg_write(wm8350, WM8350_CSB_FLASH_CONTROL, |
| (mode ? WM8350_CS2_FLASH_MODE : 0) | |
| (trigger ? WM8350_CS2_TRIGSRC : 0) | |
| duration | on_ramp | off_ramp | drive); |
| break; |
| default: |
| return -EINVAL; |
| } |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(wm8350_isink_set_flash); |
| |
| static int wm8350_dcdc_set_voltage(struct regulator_dev *rdev, int min_uV, |
| int max_uV) |
| { |
| struct wm8350 *wm8350 = rdev_get_drvdata(rdev); |
| int volt_reg, dcdc = rdev_get_id(rdev), mV, |
| min_mV = min_uV / 1000, max_mV = max_uV / 1000; |
| u16 val; |
| |
| if (min_mV < 850 || min_mV > 4025) |
| return -EINVAL; |
| if (max_mV < 850 || max_mV > 4025) |
| return -EINVAL; |
| |
| /* step size is 25mV */ |
| mV = (min_mV - 826) / 25; |
| if (wm8350_dcdc_val_to_mvolts(mV) > max_mV) |
| return -EINVAL; |
| BUG_ON(wm8350_dcdc_val_to_mvolts(mV) < min_mV); |
| |
| switch (dcdc) { |
| case WM8350_DCDC_1: |
| volt_reg = WM8350_DCDC1_CONTROL; |
| break; |
| case WM8350_DCDC_3: |
| volt_reg = WM8350_DCDC3_CONTROL; |
| break; |
| case WM8350_DCDC_4: |
| volt_reg = WM8350_DCDC4_CONTROL; |
| break; |
| case WM8350_DCDC_6: |
| volt_reg = WM8350_DCDC6_CONTROL; |
| break; |
| case WM8350_DCDC_2: |
| case WM8350_DCDC_5: |
| default: |
| return -EINVAL; |
| } |
| |
| /* all DCDCs have same mV bits */ |
| val = wm8350_reg_read(wm8350, volt_reg) & ~WM8350_DC1_VSEL_MASK; |
| wm8350_reg_write(wm8350, volt_reg, val | mV); |
| return 0; |
| } |
| |
| static int wm8350_dcdc_get_voltage(struct regulator_dev *rdev) |
| { |
| struct wm8350 *wm8350 = rdev_get_drvdata(rdev); |
| int volt_reg, dcdc = rdev_get_id(rdev); |
| u16 val; |
| |
| switch (dcdc) { |
| case WM8350_DCDC_1: |
| volt_reg = WM8350_DCDC1_CONTROL; |
| break; |
| case WM8350_DCDC_3: |
| volt_reg = WM8350_DCDC3_CONTROL; |
| break; |
| case WM8350_DCDC_4: |
| volt_reg = WM8350_DCDC4_CONTROL; |
| break; |
| case WM8350_DCDC_6: |
| volt_reg = WM8350_DCDC6_CONTROL; |
| break; |
| case WM8350_DCDC_2: |
| case WM8350_DCDC_5: |
| default: |
| return -EINVAL; |
| } |
| |
| /* all DCDCs have same mV bits */ |
| val = wm8350_reg_read(wm8350, volt_reg) & WM8350_DC1_VSEL_MASK; |
| return wm8350_dcdc_val_to_mvolts(val) * 1000; |
| } |
| |
| static int wm8350_dcdc_list_voltage(struct regulator_dev *rdev, |
| unsigned selector) |
| { |
| if (selector > WM8350_DCDC_MAX_VSEL) |
| return -EINVAL; |
| return wm8350_dcdc_val_to_mvolts(selector) * 1000; |
| } |
| |
| static int wm8350_dcdc_set_suspend_voltage(struct regulator_dev *rdev, int uV) |
| { |
| struct wm8350 *wm8350 = rdev_get_drvdata(rdev); |
| int volt_reg, mV = uV / 1000, dcdc = rdev_get_id(rdev); |
| u16 val; |
| |
| dev_dbg(wm8350->dev, "%s %d mV %d\n", __func__, dcdc, mV); |
| |
| if (mV && (mV < 850 || mV > 4025)) { |
| dev_err(wm8350->dev, |
| "DCDC%d suspend voltage %d mV out of range\n", |
| dcdc, mV); |
| return -EINVAL; |
| } |
| if (mV == 0) |
| mV = 850; |
| |
| switch (dcdc) { |
| case WM8350_DCDC_1: |
| volt_reg = WM8350_DCDC1_LOW_POWER; |
| break; |
| case WM8350_DCDC_3: |
| volt_reg = WM8350_DCDC3_LOW_POWER; |
| break; |
| case WM8350_DCDC_4: |
| volt_reg = WM8350_DCDC4_LOW_POWER; |
| break; |
| case WM8350_DCDC_6: |
| volt_reg = WM8350_DCDC6_LOW_POWER; |
| break; |
| case WM8350_DCDC_2: |
| case WM8350_DCDC_5: |
| default: |
| return -EINVAL; |
| } |
| |
| /* all DCDCs have same mV bits */ |
| val = wm8350_reg_read(wm8350, volt_reg) & ~WM8350_DC1_VSEL_MASK; |
| wm8350_reg_write(wm8350, volt_reg, |
| val | wm8350_dcdc_mvolts_to_val(mV)); |
| return 0; |
| } |
| |
| static int wm8350_dcdc_set_suspend_enable(struct regulator_dev *rdev) |
| { |
| struct wm8350 *wm8350 = rdev_get_drvdata(rdev); |
| int dcdc = rdev_get_id(rdev); |
| u16 val; |
| |
| switch (dcdc) { |
| case WM8350_DCDC_1: |
| val = wm8350_reg_read(wm8350, WM8350_DCDC1_LOW_POWER) |
| & ~WM8350_DCDC_HIB_MODE_MASK; |
| wm8350_reg_write(wm8350, WM8350_DCDC1_LOW_POWER, |
| wm8350->pmic.dcdc1_hib_mode); |
| break; |
| case WM8350_DCDC_3: |
| val = wm8350_reg_read(wm8350, WM8350_DCDC3_LOW_POWER) |
| & ~WM8350_DCDC_HIB_MODE_MASK; |
| wm8350_reg_write(wm8350, WM8350_DCDC3_LOW_POWER, |
| wm8350->pmic.dcdc3_hib_mode); |
| break; |
| case WM8350_DCDC_4: |
| val = wm8350_reg_read(wm8350, WM8350_DCDC4_LOW_POWER) |
| & ~WM8350_DCDC_HIB_MODE_MASK; |
| wm8350_reg_write(wm8350, WM8350_DCDC4_LOW_POWER, |
| wm8350->pmic.dcdc4_hib_mode); |
| break; |
| case WM8350_DCDC_6: |
| val = wm8350_reg_read(wm8350, WM8350_DCDC6_LOW_POWER) |
| & ~WM8350_DCDC_HIB_MODE_MASK; |
| wm8350_reg_write(wm8350, WM8350_DCDC6_LOW_POWER, |
| wm8350->pmic.dcdc6_hib_mode); |
| break; |
| case WM8350_DCDC_2: |
| case WM8350_DCDC_5: |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int wm8350_dcdc_set_suspend_disable(struct regulator_dev *rdev) |
| { |
| struct wm8350 *wm8350 = rdev_get_drvdata(rdev); |
| int dcdc = rdev_get_id(rdev); |
| u16 val; |
| |
| switch (dcdc) { |
| case WM8350_DCDC_1: |
| val = wm8350_reg_read(wm8350, WM8350_DCDC1_LOW_POWER); |
| wm8350->pmic.dcdc1_hib_mode = val & WM8350_DCDC_HIB_MODE_MASK; |
| wm8350_reg_write(wm8350, WM8350_DCDC1_LOW_POWER, |
| WM8350_DCDC_HIB_MODE_DIS); |
| break; |
| case WM8350_DCDC_3: |
| val = wm8350_reg_read(wm8350, WM8350_DCDC3_LOW_POWER); |
| wm8350->pmic.dcdc3_hib_mode = val & WM8350_DCDC_HIB_MODE_MASK; |
| wm8350_reg_write(wm8350, WM8350_DCDC3_LOW_POWER, |
| WM8350_DCDC_HIB_MODE_DIS); |
| break; |
| case WM8350_DCDC_4: |
| val = wm8350_reg_read(wm8350, WM8350_DCDC4_LOW_POWER); |
| wm8350->pmic.dcdc4_hib_mode = val & WM8350_DCDC_HIB_MODE_MASK; |
| wm8350_reg_write(wm8350, WM8350_DCDC4_LOW_POWER, |
| WM8350_DCDC_HIB_MODE_DIS); |
| break; |
| case WM8350_DCDC_6: |
| val = wm8350_reg_read(wm8350, WM8350_DCDC6_LOW_POWER); |
| wm8350->pmic.dcdc6_hib_mode = val & WM8350_DCDC_HIB_MODE_MASK; |
| wm8350_reg_write(wm8350, WM8350_DCDC6_LOW_POWER, |
| WM8350_DCDC_HIB_MODE_DIS); |
| break; |
| case WM8350_DCDC_2: |
| case WM8350_DCDC_5: |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int wm8350_dcdc25_set_suspend_enable(struct regulator_dev *rdev) |
| { |
| struct wm8350 *wm8350 = rdev_get_drvdata(rdev); |
| int dcdc = rdev_get_id(rdev); |
| u16 val; |
| |
| switch (dcdc) { |
| case WM8350_DCDC_2: |
| val = wm8350_reg_read(wm8350, WM8350_DCDC2_CONTROL) |
| & ~WM8350_DC2_HIB_MODE_MASK; |
| wm8350_reg_write(wm8350, WM8350_DCDC2_CONTROL, val | |
| WM8350_DC2_HIB_MODE_ACTIVE); |
| break; |
| case WM8350_DCDC_5: |
| val = wm8350_reg_read(wm8350, WM8350_DCDC5_CONTROL) |
| & ~WM8350_DC2_HIB_MODE_MASK; |
| wm8350_reg_write(wm8350, WM8350_DCDC5_CONTROL, val | |
| WM8350_DC5_HIB_MODE_ACTIVE); |
| break; |
| default: |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| static int wm8350_dcdc25_set_suspend_disable(struct regulator_dev *rdev) |
| { |
| struct wm8350 *wm8350 = rdev_get_drvdata(rdev); |
| int dcdc = rdev_get_id(rdev); |
| u16 val; |
| |
| switch (dcdc) { |
| case WM8350_DCDC_2: |
| val = wm8350_reg_read(wm8350, WM8350_DCDC2_CONTROL) |
| & ~WM8350_DC2_HIB_MODE_MASK; |
| wm8350_reg_write(wm8350, WM8350_DCDC2_CONTROL, val | |
| WM8350_DC2_HIB_MODE_DISABLE); |
| break; |
| case WM8350_DCDC_5: |
| val = wm8350_reg_read(wm8350, WM8350_DCDC5_CONTROL) |
| & ~WM8350_DC2_HIB_MODE_MASK; |
| wm8350_reg_write(wm8350, WM8350_DCDC5_CONTROL, val | |
| WM8350_DC2_HIB_MODE_DISABLE); |
| break; |
| default: |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| static int wm8350_dcdc_set_suspend_mode(struct regulator_dev *rdev, |
| unsigned int mode) |
| { |
| struct wm8350 *wm8350 = rdev_get_drvdata(rdev); |
| int dcdc = rdev_get_id(rdev); |
| u16 *hib_mode; |
| |
| switch (dcdc) { |
| case WM8350_DCDC_1: |
| hib_mode = &wm8350->pmic.dcdc1_hib_mode; |
| break; |
| case WM8350_DCDC_3: |
| hib_mode = &wm8350->pmic.dcdc3_hib_mode; |
| break; |
| case WM8350_DCDC_4: |
| hib_mode = &wm8350->pmic.dcdc4_hib_mode; |
| break; |
| case WM8350_DCDC_6: |
| hib_mode = &wm8350->pmic.dcdc6_hib_mode; |
| break; |
| case WM8350_DCDC_2: |
| case WM8350_DCDC_5: |
| default: |
| return -EINVAL; |
| } |
| |
| switch (mode) { |
| case REGULATOR_MODE_NORMAL: |
| *hib_mode = WM8350_DCDC_HIB_MODE_IMAGE; |
| break; |
| case REGULATOR_MODE_IDLE: |
| *hib_mode = WM8350_DCDC_HIB_MODE_STANDBY; |
| break; |
| case REGULATOR_MODE_STANDBY: |
| *hib_mode = WM8350_DCDC_HIB_MODE_LDO_IM; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int wm8350_ldo_set_suspend_voltage(struct regulator_dev *rdev, int uV) |
| { |
| struct wm8350 *wm8350 = rdev_get_drvdata(rdev); |
| int volt_reg, mV = uV / 1000, ldo = rdev_get_id(rdev); |
| u16 val; |
| |
| dev_dbg(wm8350->dev, "%s %d mV %d\n", __func__, ldo, mV); |
| |
| if (mV < 900 || mV > 3300) { |
| dev_err(wm8350->dev, "LDO%d voltage %d mV out of range\n", |
| ldo, mV); |
| return -EINVAL; |
| } |
| |
| switch (ldo) { |
| case WM8350_LDO_1: |
| volt_reg = WM8350_LDO1_LOW_POWER; |
| break; |
| case WM8350_LDO_2: |
| volt_reg = WM8350_LDO2_LOW_POWER; |
| break; |
| case WM8350_LDO_3: |
| volt_reg = WM8350_LDO3_LOW_POWER; |
| break; |
| case WM8350_LDO_4: |
| volt_reg = WM8350_LDO4_LOW_POWER; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| /* all LDOs have same mV bits */ |
| val = wm8350_reg_read(wm8350, volt_reg) & ~WM8350_LDO1_VSEL_MASK; |
| wm8350_reg_write(wm8350, volt_reg, |
| val | wm8350_ldo_mvolts_to_val(mV)); |
| return 0; |
| } |
| |
| static int wm8350_ldo_set_suspend_enable(struct regulator_dev *rdev) |
| { |
| struct wm8350 *wm8350 = rdev_get_drvdata(rdev); |
| int volt_reg, ldo = rdev_get_id(rdev); |
| u16 val; |
| |
| switch (ldo) { |
| case WM8350_LDO_1: |
| volt_reg = WM8350_LDO1_LOW_POWER; |
| break; |
| case WM8350_LDO_2: |
| volt_reg = WM8350_LDO2_LOW_POWER; |
| break; |
| case WM8350_LDO_3: |
| volt_reg = WM8350_LDO3_LOW_POWER; |
| break; |
| case WM8350_LDO_4: |
| volt_reg = WM8350_LDO4_LOW_POWER; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| /* all LDOs have same mV bits */ |
| val = wm8350_reg_read(wm8350, volt_reg) & ~WM8350_LDO1_HIB_MODE_MASK; |
| wm8350_reg_write(wm8350, volt_reg, val); |
| return 0; |
| } |
| |
| static int wm8350_ldo_set_suspend_disable(struct regulator_dev *rdev) |
| { |
| struct wm8350 *wm8350 = rdev_get_drvdata(rdev); |
| int volt_reg, ldo = rdev_get_id(rdev); |
| u16 val; |
| |
| switch (ldo) { |
| case WM8350_LDO_1: |
| volt_reg = WM8350_LDO1_LOW_POWER; |
| break; |
| case WM8350_LDO_2: |
| volt_reg = WM8350_LDO2_LOW_POWER; |
| break; |
| case WM8350_LDO_3: |
| volt_reg = WM8350_LDO3_LOW_POWER; |
| break; |
| case WM8350_LDO_4: |
| volt_reg = WM8350_LDO4_LOW_POWER; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| /* all LDOs have same mV bits */ |
| val = wm8350_reg_read(wm8350, volt_reg) & ~WM8350_LDO1_HIB_MODE_MASK; |
| wm8350_reg_write(wm8350, volt_reg, WM8350_LDO1_HIB_MODE_DIS); |
| return 0; |
| } |
| |
| static int wm8350_ldo_set_voltage(struct regulator_dev *rdev, int min_uV, |
| int max_uV) |
| { |
| struct wm8350 *wm8350 = rdev_get_drvdata(rdev); |
| int volt_reg, ldo = rdev_get_id(rdev), mV, min_mV = min_uV / 1000, |
| max_mV = max_uV / 1000; |
| u16 val; |
| |
| if (min_mV < 900 || min_mV > 3300) |
| return -EINVAL; |
| if (max_mV < 900 || max_mV > 3300) |
| return -EINVAL; |
| |
| if (min_mV < 1800) { |
| /* step size is 50mV < 1800mV */ |
| mV = (min_mV - 851) / 50; |
| if (wm8350_ldo_val_to_mvolts(mV) > max_mV) |
| return -EINVAL; |
| BUG_ON(wm8350_ldo_val_to_mvolts(mV) < min_mV); |
| } else { |
| /* step size is 100mV > 1800mV */ |
| mV = ((min_mV - 1701) / 100) + 16; |
| if (wm8350_ldo_val_to_mvolts(mV) > max_mV) |
| return -EINVAL; |
| BUG_ON(wm8350_ldo_val_to_mvolts(mV) < min_mV); |
| } |
| |
| switch (ldo) { |
| case WM8350_LDO_1: |
| volt_reg = WM8350_LDO1_CONTROL; |
| break; |
| case WM8350_LDO_2: |
| volt_reg = WM8350_LDO2_CONTROL; |
| break; |
| case WM8350_LDO_3: |
| volt_reg = WM8350_LDO3_CONTROL; |
| break; |
| case WM8350_LDO_4: |
| volt_reg = WM8350_LDO4_CONTROL; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| /* all LDOs have same mV bits */ |
| val = wm8350_reg_read(wm8350, volt_reg) & ~WM8350_LDO1_VSEL_MASK; |
| wm8350_reg_write(wm8350, volt_reg, val | mV); |
| return 0; |
| } |
| |
| static int wm8350_ldo_get_voltage(struct regulator_dev *rdev) |
| { |
| struct wm8350 *wm8350 = rdev_get_drvdata(rdev); |
| int volt_reg, ldo = rdev_get_id(rdev); |
| u16 val; |
| |
| switch (ldo) { |
| case WM8350_LDO_1: |
| volt_reg = WM8350_LDO1_CONTROL; |
| break; |
| case WM8350_LDO_2: |
| volt_reg = WM8350_LDO2_CONTROL; |
| break; |
| case WM8350_LDO_3: |
| volt_reg = WM8350_LDO3_CONTROL; |
| break; |
| case WM8350_LDO_4: |
| volt_reg = WM8350_LDO4_CONTROL; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| /* all LDOs have same mV bits */ |
| val = wm8350_reg_read(wm8350, volt_reg) & WM8350_LDO1_VSEL_MASK; |
| return wm8350_ldo_val_to_mvolts(val) * 1000; |
| } |
| |
| static int wm8350_ldo_list_voltage(struct regulator_dev *rdev, |
| unsigned selector) |
| { |
| if (selector > WM8350_LDO1_VSEL_MASK) |
| return -EINVAL; |
| return wm8350_ldo_val_to_mvolts(selector) * 1000; |
| } |
| |
| int wm8350_dcdc_set_slot(struct wm8350 *wm8350, int dcdc, u16 start, |
| u16 stop, u16 fault) |
| { |
| int slot_reg; |
| u16 val; |
| |
| dev_dbg(wm8350->dev, "%s %d start %d stop %d\n", |
| __func__, dcdc, start, stop); |
| |
| /* slot valid ? */ |
| if (start > 15 || stop > 15) |
| return -EINVAL; |
| |
| switch (dcdc) { |
| case WM8350_DCDC_1: |
| slot_reg = WM8350_DCDC1_TIMEOUTS; |
| break; |
| case WM8350_DCDC_2: |
| slot_reg = WM8350_DCDC2_TIMEOUTS; |
| break; |
| case WM8350_DCDC_3: |
| slot_reg = WM8350_DCDC3_TIMEOUTS; |
| break; |
| case WM8350_DCDC_4: |
| slot_reg = WM8350_DCDC4_TIMEOUTS; |
| break; |
| case WM8350_DCDC_5: |
| slot_reg = WM8350_DCDC5_TIMEOUTS; |
| break; |
| case WM8350_DCDC_6: |
| slot_reg = WM8350_DCDC6_TIMEOUTS; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| val = wm8350_reg_read(wm8350, slot_reg) & |
| ~(WM8350_DC1_ENSLOT_MASK | WM8350_DC1_SDSLOT_MASK | |
| WM8350_DC1_ERRACT_MASK); |
| wm8350_reg_write(wm8350, slot_reg, |
| val | (start << WM8350_DC1_ENSLOT_SHIFT) | |
| (stop << WM8350_DC1_SDSLOT_SHIFT) | |
| (fault << WM8350_DC1_ERRACT_SHIFT)); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(wm8350_dcdc_set_slot); |
| |
| int wm8350_ldo_set_slot(struct wm8350 *wm8350, int ldo, u16 start, u16 stop) |
| { |
| int slot_reg; |
| u16 val; |
| |
| dev_dbg(wm8350->dev, "%s %d start %d stop %d\n", |
| __func__, ldo, start, stop); |
| |
| /* slot valid ? */ |
| if (start > 15 || stop > 15) |
| return -EINVAL; |
| |
| switch (ldo) { |
| case WM8350_LDO_1: |
| slot_reg = WM8350_LDO1_TIMEOUTS; |
| break; |
| case WM8350_LDO_2: |
| slot_reg = WM8350_LDO2_TIMEOUTS; |
| break; |
| case WM8350_LDO_3: |
| slot_reg = WM8350_LDO3_TIMEOUTS; |
| break; |
| case WM8350_LDO_4: |
| slot_reg = WM8350_LDO4_TIMEOUTS; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| val = wm8350_reg_read(wm8350, slot_reg) & ~WM8350_LDO1_SDSLOT_MASK; |
| wm8350_reg_write(wm8350, slot_reg, val | ((start << 10) | (stop << 6))); |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(wm8350_ldo_set_slot); |
| |
| int wm8350_dcdc25_set_mode(struct wm8350 *wm8350, int dcdc, u16 mode, |
| u16 ilim, u16 ramp, u16 feedback) |
| { |
| u16 val; |
| |
| dev_dbg(wm8350->dev, "%s %d mode: %s %s\n", __func__, dcdc, |
| mode ? "normal" : "boost", ilim ? "low" : "normal"); |
| |
| switch (dcdc) { |
| case WM8350_DCDC_2: |
| val = wm8350_reg_read(wm8350, WM8350_DCDC2_CONTROL) |
| & ~(WM8350_DC2_MODE_MASK | WM8350_DC2_ILIM_MASK | |
| WM8350_DC2_RMP_MASK | WM8350_DC2_FBSRC_MASK); |
| wm8350_reg_write(wm8350, WM8350_DCDC2_CONTROL, val | |
| (mode << WM8350_DC2_MODE_SHIFT) | |
| (ilim << WM8350_DC2_ILIM_SHIFT) | |
| (ramp << WM8350_DC2_RMP_SHIFT) | |
| (feedback << WM8350_DC2_FBSRC_SHIFT)); |
| break; |
| case WM8350_DCDC_5: |
| val = wm8350_reg_read(wm8350, WM8350_DCDC5_CONTROL) |
| & ~(WM8350_DC5_MODE_MASK | WM8350_DC5_ILIM_MASK | |
| WM8350_DC5_RMP_MASK | WM8350_DC5_FBSRC_MASK); |
| wm8350_reg_write(wm8350, WM8350_DCDC5_CONTROL, val | |
| (mode << WM8350_DC5_MODE_SHIFT) | |
| (ilim << WM8350_DC5_ILIM_SHIFT) | |
| (ramp << WM8350_DC5_RMP_SHIFT) | |
| (feedback << WM8350_DC5_FBSRC_SHIFT)); |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(wm8350_dcdc25_set_mode); |
| |
| static int wm8350_dcdc_enable(struct regulator_dev *rdev) |
| { |
| struct wm8350 *wm8350 = rdev_get_drvdata(rdev); |
| int dcdc = rdev_get_id(rdev); |
| u16 shift; |
| |
| if (dcdc < WM8350_DCDC_1 || dcdc > WM8350_DCDC_6) |
| return -EINVAL; |
| |
| shift = dcdc - WM8350_DCDC_1; |
| wm8350_set_bits(wm8350, WM8350_DCDC_LDO_REQUESTED, 1 << shift); |
| return 0; |
| } |
| |
| static int wm8350_dcdc_disable(struct regulator_dev *rdev) |
| { |
| struct wm8350 *wm8350 = rdev_get_drvdata(rdev); |
| int dcdc = rdev_get_id(rdev); |
| u16 shift; |
| |
| if (dcdc < WM8350_DCDC_1 || dcdc > WM8350_DCDC_6) |
| return -EINVAL; |
| |
| shift = dcdc - WM8350_DCDC_1; |
| wm8350_clear_bits(wm8350, WM8350_DCDC_LDO_REQUESTED, 1 << shift); |
| |
| return 0; |
| } |
| |
| static int wm8350_ldo_enable(struct regulator_dev *rdev) |
| { |
| struct wm8350 *wm8350 = rdev_get_drvdata(rdev); |
| int ldo = rdev_get_id(rdev); |
| u16 shift; |
| |
| if (ldo < WM8350_LDO_1 || ldo > WM8350_LDO_4) |
| return -EINVAL; |
| |
| shift = (ldo - WM8350_LDO_1) + 8; |
| wm8350_set_bits(wm8350, WM8350_DCDC_LDO_REQUESTED, 1 << shift); |
| return 0; |
| } |
| |
| static int wm8350_ldo_disable(struct regulator_dev *rdev) |
| { |
| struct wm8350 *wm8350 = rdev_get_drvdata(rdev); |
| int ldo = rdev_get_id(rdev); |
| u16 shift; |
| |
| if (ldo < WM8350_LDO_1 || ldo > WM8350_LDO_4) |
| return -EINVAL; |
| |
| shift = (ldo - WM8350_LDO_1) + 8; |
| wm8350_clear_bits(wm8350, WM8350_DCDC_LDO_REQUESTED, 1 << shift); |
| return 0; |
| } |
| |
| static int force_continuous_enable(struct wm8350 *wm8350, int dcdc, int enable) |
| { |
| int reg = 0, ret; |
| |
| switch (dcdc) { |
| case WM8350_DCDC_1: |
| reg = WM8350_DCDC1_FORCE_PWM; |
| break; |
| case WM8350_DCDC_3: |
| reg = WM8350_DCDC3_FORCE_PWM; |
| break; |
| case WM8350_DCDC_4: |
| reg = WM8350_DCDC4_FORCE_PWM; |
| break; |
| case WM8350_DCDC_6: |
| reg = WM8350_DCDC6_FORCE_PWM; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| if (enable) |
| ret = wm8350_set_bits(wm8350, reg, |
| WM8350_DCDC1_FORCE_PWM_ENA); |
| else |
| ret = wm8350_clear_bits(wm8350, reg, |
| WM8350_DCDC1_FORCE_PWM_ENA); |
| return ret; |
| } |
| |
| static int wm8350_dcdc_set_mode(struct regulator_dev *rdev, unsigned int mode) |
| { |
| struct wm8350 *wm8350 = rdev_get_drvdata(rdev); |
| int dcdc = rdev_get_id(rdev); |
| u16 val; |
| |
| if (dcdc < WM8350_DCDC_1 || dcdc > WM8350_DCDC_6) |
| return -EINVAL; |
| |
| if (dcdc == WM8350_DCDC_2 || dcdc == WM8350_DCDC_5) |
| return -EINVAL; |
| |
| val = 1 << (dcdc - WM8350_DCDC_1); |
| |
| switch (mode) { |
| case REGULATOR_MODE_FAST: |
| /* force continuous mode */ |
| wm8350_set_bits(wm8350, WM8350_DCDC_ACTIVE_OPTIONS, val); |
| wm8350_clear_bits(wm8350, WM8350_DCDC_SLEEP_OPTIONS, val); |
| force_continuous_enable(wm8350, dcdc, 1); |
| break; |
| case REGULATOR_MODE_NORMAL: |
| /* active / pulse skipping */ |
| wm8350_set_bits(wm8350, WM8350_DCDC_ACTIVE_OPTIONS, val); |
| wm8350_clear_bits(wm8350, WM8350_DCDC_SLEEP_OPTIONS, val); |
| force_continuous_enable(wm8350, dcdc, 0); |
| break; |
| case REGULATOR_MODE_IDLE: |
| /* standby mode */ |
| force_continuous_enable(wm8350, dcdc, 0); |
| wm8350_clear_bits(wm8350, WM8350_DCDC_SLEEP_OPTIONS, val); |
| wm8350_clear_bits(wm8350, WM8350_DCDC_ACTIVE_OPTIONS, val); |
| break; |
| case REGULATOR_MODE_STANDBY: |
| /* LDO mode */ |
| force_continuous_enable(wm8350, dcdc, 0); |
| wm8350_set_bits(wm8350, WM8350_DCDC_SLEEP_OPTIONS, val); |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static unsigned int wm8350_dcdc_get_mode(struct regulator_dev *rdev) |
| { |
| struct wm8350 *wm8350 = rdev_get_drvdata(rdev); |
| int dcdc = rdev_get_id(rdev); |
| u16 mask, sleep, active, force; |
| int mode = REGULATOR_MODE_NORMAL; |
| int reg; |
| |
| switch (dcdc) { |
| case WM8350_DCDC_1: |
| reg = WM8350_DCDC1_FORCE_PWM; |
| break; |
| case WM8350_DCDC_3: |
| reg = WM8350_DCDC3_FORCE_PWM; |
| break; |
| case WM8350_DCDC_4: |
| reg = WM8350_DCDC4_FORCE_PWM; |
| break; |
| case WM8350_DCDC_6: |
| reg = WM8350_DCDC6_FORCE_PWM; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| mask = 1 << (dcdc - WM8350_DCDC_1); |
| active = wm8350_reg_read(wm8350, WM8350_DCDC_ACTIVE_OPTIONS) & mask; |
| force = wm8350_reg_read(wm8350, reg) & WM8350_DCDC1_FORCE_PWM_ENA; |
| sleep = wm8350_reg_read(wm8350, WM8350_DCDC_SLEEP_OPTIONS) & mask; |
| |
| dev_dbg(wm8350->dev, "mask %x active %x sleep %x force %x", |
| mask, active, sleep, force); |
| |
| if (active && !sleep) { |
| if (force) |
| mode = REGULATOR_MODE_FAST; |
| else |
| mode = REGULATOR_MODE_NORMAL; |
| } else if (!active && !sleep) |
| mode = REGULATOR_MODE_IDLE; |
| else if (!sleep) |
| mode = REGULATOR_MODE_STANDBY; |
| |
| return mode; |
| } |
| |
| static unsigned int wm8350_ldo_get_mode(struct regulator_dev *rdev) |
| { |
| return REGULATOR_MODE_NORMAL; |
| } |
| |
| struct wm8350_dcdc_efficiency { |
| int uA_load_min; |
| int uA_load_max; |
| unsigned int mode; |
| }; |
| |
| static const struct wm8350_dcdc_efficiency dcdc1_6_efficiency[] = { |
| {0, 10000, REGULATOR_MODE_STANDBY}, /* 0 - 10mA - LDO */ |
| {10000, 100000, REGULATOR_MODE_IDLE}, /* 10mA - 100mA - Standby */ |
| {100000, 1000000, REGULATOR_MODE_NORMAL}, /* > 100mA - Active */ |
| {-1, -1, REGULATOR_MODE_NORMAL}, |
| }; |
| |
| static const struct wm8350_dcdc_efficiency dcdc3_4_efficiency[] = { |
| {0, 10000, REGULATOR_MODE_STANDBY}, /* 0 - 10mA - LDO */ |
| {10000, 100000, REGULATOR_MODE_IDLE}, /* 10mA - 100mA - Standby */ |
| {100000, 800000, REGULATOR_MODE_NORMAL}, /* > 100mA - Active */ |
| {-1, -1, REGULATOR_MODE_NORMAL}, |
| }; |
| |
| static unsigned int get_mode(int uA, const struct wm8350_dcdc_efficiency *eff) |
| { |
| int i = 0; |
| |
| while (eff[i].uA_load_min != -1) { |
| if (uA >= eff[i].uA_load_min && uA <= eff[i].uA_load_max) |
| return eff[i].mode; |
| } |
| return REGULATOR_MODE_NORMAL; |
| } |
| |
| /* Query the regulator for it's most efficient mode @ uV,uA |
| * WM8350 regulator efficiency is pretty similar over |
| * different input and output uV. |
| */ |
| static unsigned int wm8350_dcdc_get_optimum_mode(struct regulator_dev *rdev, |
| int input_uV, int output_uV, |
| int output_uA) |
| { |
| int dcdc = rdev_get_id(rdev), mode; |
| |
| switch (dcdc) { |
| case WM8350_DCDC_1: |
| case WM8350_DCDC_6: |
| mode = get_mode(output_uA, dcdc1_6_efficiency); |
| break; |
| case WM8350_DCDC_3: |
| case WM8350_DCDC_4: |
| mode = get_mode(output_uA, dcdc3_4_efficiency); |
| break; |
| default: |
| mode = REGULATOR_MODE_NORMAL; |
| break; |
| } |
| return mode; |
| } |
| |
| static int wm8350_dcdc_is_enabled(struct regulator_dev *rdev) |
| { |
| struct wm8350 *wm8350 = rdev_get_drvdata(rdev); |
| int dcdc = rdev_get_id(rdev), shift; |
| |
| if (dcdc < WM8350_DCDC_1 || dcdc > WM8350_DCDC_6) |
| return -EINVAL; |
| |
| shift = dcdc - WM8350_DCDC_1; |
| return wm8350_reg_read(wm8350, WM8350_DCDC_LDO_REQUESTED) |
| & (1 << shift); |
| } |
| |
| static int wm8350_ldo_is_enabled(struct regulator_dev *rdev) |
| { |
| struct wm8350 *wm8350 = rdev_get_drvdata(rdev); |
| int ldo = rdev_get_id(rdev), shift; |
| |
| if (ldo < WM8350_LDO_1 || ldo > WM8350_LDO_4) |
| return -EINVAL; |
| |
| shift = (ldo - WM8350_LDO_1) + 8; |
| return wm8350_reg_read(wm8350, WM8350_DCDC_LDO_REQUESTED) |
| & (1 << shift); |
| } |
| |
| static struct regulator_ops wm8350_dcdc_ops = { |
| .set_voltage = wm8350_dcdc_set_voltage, |
| .get_voltage = wm8350_dcdc_get_voltage, |
| .list_voltage = wm8350_dcdc_list_voltage, |
| .enable = wm8350_dcdc_enable, |
| .disable = wm8350_dcdc_disable, |
| .get_mode = wm8350_dcdc_get_mode, |
| .set_mode = wm8350_dcdc_set_mode, |
| .get_optimum_mode = wm8350_dcdc_get_optimum_mode, |
| .is_enabled = wm8350_dcdc_is_enabled, |
| .set_suspend_voltage = wm8350_dcdc_set_suspend_voltage, |
| .set_suspend_enable = wm8350_dcdc_set_suspend_enable, |
| .set_suspend_disable = wm8350_dcdc_set_suspend_disable, |
| .set_suspend_mode = wm8350_dcdc_set_suspend_mode, |
| }; |
| |
| static struct regulator_ops wm8350_dcdc2_5_ops = { |
| .enable = wm8350_dcdc_enable, |
| .disable = wm8350_dcdc_disable, |
| .is_enabled = wm8350_dcdc_is_enabled, |
| .set_suspend_enable = wm8350_dcdc25_set_suspend_enable, |
| .set_suspend_disable = wm8350_dcdc25_set_suspend_disable, |
| }; |
| |
| static struct regulator_ops wm8350_ldo_ops = { |
| .set_voltage = wm8350_ldo_set_voltage, |
| .get_voltage = wm8350_ldo_get_voltage, |
| .list_voltage = wm8350_ldo_list_voltage, |
| .enable = wm8350_ldo_enable, |
| .disable = wm8350_ldo_disable, |
| .is_enabled = wm8350_ldo_is_enabled, |
| .get_mode = wm8350_ldo_get_mode, |
| .set_suspend_voltage = wm8350_ldo_set_suspend_voltage, |
| .set_suspend_enable = wm8350_ldo_set_suspend_enable, |
| .set_suspend_disable = wm8350_ldo_set_suspend_disable, |
| }; |
| |
| static struct regulator_ops wm8350_isink_ops = { |
| .set_current_limit = wm8350_isink_set_current, |
| .get_current_limit = wm8350_isink_get_current, |
| .enable = wm8350_isink_enable, |
| .disable = wm8350_isink_disable, |
| .is_enabled = wm8350_isink_is_enabled, |
| }; |
| |
| static struct regulator_desc wm8350_reg[NUM_WM8350_REGULATORS] = { |
| { |
| .name = "DCDC1", |
| .id = WM8350_DCDC_1, |
| .ops = &wm8350_dcdc_ops, |
| .irq = WM8350_IRQ_UV_DC1, |
| .type = REGULATOR_VOLTAGE, |
| .n_voltages = WM8350_DCDC_MAX_VSEL + 1, |
| .owner = THIS_MODULE, |
| }, |
| { |
| .name = "DCDC2", |
| .id = WM8350_DCDC_2, |
| .ops = &wm8350_dcdc2_5_ops, |
| .irq = WM8350_IRQ_UV_DC2, |
| .type = REGULATOR_VOLTAGE, |
| .owner = THIS_MODULE, |
| }, |
| { |
| .name = "DCDC3", |
| .id = WM8350_DCDC_3, |
| .ops = &wm8350_dcdc_ops, |
| .irq = WM8350_IRQ_UV_DC3, |
| .type = REGULATOR_VOLTAGE, |
| .n_voltages = WM8350_DCDC_MAX_VSEL + 1, |
| .owner = THIS_MODULE, |
| }, |
| { |
| .name = "DCDC4", |
| .id = WM8350_DCDC_4, |
| .ops = &wm8350_dcdc_ops, |
| .irq = WM8350_IRQ_UV_DC4, |
| .type = REGULATOR_VOLTAGE, |
| .n_voltages = WM8350_DCDC_MAX_VSEL + 1, |
| .owner = THIS_MODULE, |
| }, |
| { |
| .name = "DCDC5", |
| .id = WM8350_DCDC_5, |
| .ops = &wm8350_dcdc2_5_ops, |
| .irq = WM8350_IRQ_UV_DC5, |
| .type = REGULATOR_VOLTAGE, |
| .owner = THIS_MODULE, |
| }, |
| { |
| .name = "DCDC6", |
| .id = WM8350_DCDC_6, |
| .ops = &wm8350_dcdc_ops, |
| .irq = WM8350_IRQ_UV_DC6, |
| .type = REGULATOR_VOLTAGE, |
| .n_voltages = WM8350_DCDC_MAX_VSEL + 1, |
| .owner = THIS_MODULE, |
| }, |
| { |
| .name = "LDO1", |
| .id = WM8350_LDO_1, |
| .ops = &wm8350_ldo_ops, |
| .irq = WM8350_IRQ_UV_LDO1, |
| .type = REGULATOR_VOLTAGE, |
| .n_voltages = WM8350_LDO1_VSEL_MASK + 1, |
| .owner = THIS_MODULE, |
| }, |
| { |
| .name = "LDO2", |
| .id = WM8350_LDO_2, |
| .ops = &wm8350_ldo_ops, |
| .irq = WM8350_IRQ_UV_LDO2, |
| .type = REGULATOR_VOLTAGE, |
| .n_voltages = WM8350_LDO2_VSEL_MASK + 1, |
| .owner = THIS_MODULE, |
| }, |
| { |
| .name = "LDO3", |
| .id = WM8350_LDO_3, |
| .ops = &wm8350_ldo_ops, |
| .irq = WM8350_IRQ_UV_LDO3, |
| .type = REGULATOR_VOLTAGE, |
| .n_voltages = WM8350_LDO3_VSEL_MASK + 1, |
| .owner = THIS_MODULE, |
| }, |
| { |
| .name = "LDO4", |
| .id = WM8350_LDO_4, |
| .ops = &wm8350_ldo_ops, |
| .irq = WM8350_IRQ_UV_LDO4, |
| .type = REGULATOR_VOLTAGE, |
| .n_voltages = WM8350_LDO4_VSEL_MASK + 1, |
| .owner = THIS_MODULE, |
| }, |
| { |
| .name = "ISINKA", |
| .id = WM8350_ISINK_A, |
| .ops = &wm8350_isink_ops, |
| .irq = WM8350_IRQ_CS1, |
| .type = REGULATOR_CURRENT, |
| .owner = THIS_MODULE, |
| }, |
| { |
| .name = "ISINKB", |
| .id = WM8350_ISINK_B, |
| .ops = &wm8350_isink_ops, |
| .irq = WM8350_IRQ_CS2, |
| .type = REGULATOR_CURRENT, |
| .owner = THIS_MODULE, |
| }, |
| }; |
| |
| static irqreturn_t pmic_uv_handler(int irq, void *data) |
| { |
| struct regulator_dev *rdev = (struct regulator_dev *)data; |
| struct wm8350 *wm8350 = rdev_get_drvdata(rdev); |
| |
| mutex_lock(&rdev->mutex); |
| if (irq == WM8350_IRQ_CS1 || irq == WM8350_IRQ_CS2) |
| regulator_notifier_call_chain(rdev, |
| REGULATOR_EVENT_REGULATION_OUT, |
| wm8350); |
| else |
| regulator_notifier_call_chain(rdev, |
| REGULATOR_EVENT_UNDER_VOLTAGE, |
| wm8350); |
| mutex_unlock(&rdev->mutex); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int wm8350_regulator_probe(struct platform_device *pdev) |
| { |
| struct wm8350 *wm8350 = dev_get_drvdata(&pdev->dev); |
| struct regulator_dev *rdev; |
| int ret; |
| u16 val; |
| |
| if (pdev->id < WM8350_DCDC_1 || pdev->id > WM8350_ISINK_B) |
| return -ENODEV; |
| |
| /* do any regulatior specific init */ |
| switch (pdev->id) { |
| case WM8350_DCDC_1: |
| val = wm8350_reg_read(wm8350, WM8350_DCDC1_LOW_POWER); |
| wm8350->pmic.dcdc1_hib_mode = val & WM8350_DCDC_HIB_MODE_MASK; |
| break; |
| case WM8350_DCDC_3: |
| val = wm8350_reg_read(wm8350, WM8350_DCDC3_LOW_POWER); |
| wm8350->pmic.dcdc3_hib_mode = val & WM8350_DCDC_HIB_MODE_MASK; |
| break; |
| case WM8350_DCDC_4: |
| val = wm8350_reg_read(wm8350, WM8350_DCDC4_LOW_POWER); |
| wm8350->pmic.dcdc4_hib_mode = val & WM8350_DCDC_HIB_MODE_MASK; |
| break; |
| case WM8350_DCDC_6: |
| val = wm8350_reg_read(wm8350, WM8350_DCDC6_LOW_POWER); |
| wm8350->pmic.dcdc6_hib_mode = val & WM8350_DCDC_HIB_MODE_MASK; |
| break; |
| } |
| |
| /* register regulator */ |
| rdev = regulator_register(&wm8350_reg[pdev->id], &pdev->dev, |
| pdev->dev.platform_data, |
| dev_get_drvdata(&pdev->dev)); |
| if (IS_ERR(rdev)) { |
| dev_err(&pdev->dev, "failed to register %s\n", |
| wm8350_reg[pdev->id].name); |
| return PTR_ERR(rdev); |
| } |
| |
| /* register regulator IRQ */ |
| ret = wm8350_register_irq(wm8350, wm8350_reg[pdev->id].irq, |
| pmic_uv_handler, 0, "UV", rdev); |
| if (ret < 0) { |
| regulator_unregister(rdev); |
| dev_err(&pdev->dev, "failed to register regulator %s IRQ\n", |
| wm8350_reg[pdev->id].name); |
| return ret; |
| } |
| |
| wm8350_unmask_irq(wm8350, wm8350_reg[pdev->id].irq); |
| |
| return 0; |
| } |
| |
| static int wm8350_regulator_remove(struct platform_device *pdev) |
| { |
| struct regulator_dev *rdev = platform_get_drvdata(pdev); |
| struct wm8350 *wm8350 = rdev_get_drvdata(rdev); |
| |
| wm8350_mask_irq(wm8350, wm8350_reg[pdev->id].irq); |
| wm8350_free_irq(wm8350, wm8350_reg[pdev->id].irq); |
| |
| regulator_unregister(rdev); |
| |
| return 0; |
| } |
| |
| int wm8350_register_regulator(struct wm8350 *wm8350, int reg, |
| struct regulator_init_data *initdata) |
| { |
| struct platform_device *pdev; |
| int ret; |
| if (reg < 0 || reg >= NUM_WM8350_REGULATORS) |
| return -EINVAL; |
| |
| if (wm8350->pmic.pdev[reg]) |
| return -EBUSY; |
| |
| if (reg >= WM8350_DCDC_1 && reg <= WM8350_DCDC_6 && |
| reg > wm8350->pmic.max_dcdc) |
| return -ENODEV; |
| if (reg >= WM8350_ISINK_A && reg <= WM8350_ISINK_B && |
| reg > wm8350->pmic.max_isink) |
| return -ENODEV; |
| |
| pdev = platform_device_alloc("wm8350-regulator", reg); |
| if (!pdev) |
| return -ENOMEM; |
| |
| wm8350->pmic.pdev[reg] = pdev; |
| |
| initdata->driver_data = wm8350; |
| |
| pdev->dev.platform_data = initdata; |
| pdev->dev.parent = wm8350->dev; |
| platform_set_drvdata(pdev, wm8350); |
| |
| ret = platform_device_add(pdev); |
| |
| if (ret != 0) { |
| dev_err(wm8350->dev, "Failed to register regulator %d: %d\n", |
| reg, ret); |
| platform_device_del(pdev); |
| wm8350->pmic.pdev[reg] = NULL; |
| } |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(wm8350_register_regulator); |
| |
| /** |
| * wm8350_register_led - Register a WM8350 LED output |
| * |
| * @param wm8350 The WM8350 device to configure. |
| * @param lednum LED device index to create. |
| * @param dcdc The DCDC to use for the LED. |
| * @param isink The ISINK to use for the LED. |
| * @param pdata Configuration for the LED. |
| * |
| * The WM8350 supports the use of an ISINK together with a DCDC to |
| * provide a power-efficient LED driver. This function registers the |
| * regulators and instantiates the platform device for a LED. The |
| * operating modes for the LED regulators must be configured using |
| * wm8350_isink_set_flash(), wm8350_dcdc25_set_mode() and |
| * wm8350_dcdc_set_slot() prior to calling this function. |
| */ |
| int wm8350_register_led(struct wm8350 *wm8350, int lednum, int dcdc, int isink, |
| struct wm8350_led_platform_data *pdata) |
| { |
| struct wm8350_led *led; |
| struct platform_device *pdev; |
| int ret; |
| |
| if (lednum >= ARRAY_SIZE(wm8350->pmic.led) || lednum < 0) { |
| dev_err(wm8350->dev, "Invalid LED index %d\n", lednum); |
| return -ENODEV; |
| } |
| |
| led = &wm8350->pmic.led[lednum]; |
| |
| if (led->pdev) { |
| dev_err(wm8350->dev, "LED %d already allocated\n", lednum); |
| return -EINVAL; |
| } |
| |
| pdev = platform_device_alloc("wm8350-led", lednum); |
| if (pdev == NULL) { |
| dev_err(wm8350->dev, "Failed to allocate LED %d\n", lednum); |
| return -ENOMEM; |
| } |
| |
| led->isink_consumer.dev = &pdev->dev; |
| led->isink_consumer.supply = "led_isink"; |
| led->isink_init.num_consumer_supplies = 1; |
| led->isink_init.consumer_supplies = &led->isink_consumer; |
| led->isink_init.constraints.min_uA = 0; |
| led->isink_init.constraints.max_uA = pdata->max_uA; |
| led->isink_init.constraints.valid_ops_mask = REGULATOR_CHANGE_CURRENT; |
| led->isink_init.constraints.valid_modes_mask = REGULATOR_MODE_NORMAL; |
| ret = wm8350_register_regulator(wm8350, isink, &led->isink_init); |
| if (ret != 0) { |
| platform_device_put(pdev); |
| return ret; |
| } |
| |
| led->dcdc_consumer.dev = &pdev->dev; |
| led->dcdc_consumer.supply = "led_vcc"; |
| led->dcdc_init.num_consumer_supplies = 1; |
| led->dcdc_init.consumer_supplies = &led->dcdc_consumer; |
| led->dcdc_init.constraints.valid_modes_mask = REGULATOR_MODE_NORMAL; |
| ret = wm8350_register_regulator(wm8350, dcdc, &led->dcdc_init); |
| if (ret != 0) { |
| platform_device_put(pdev); |
| return ret; |
| } |
| |
| switch (isink) { |
| case WM8350_ISINK_A: |
| wm8350->pmic.isink_A_dcdc = dcdc; |
| break; |
| case WM8350_ISINK_B: |
| wm8350->pmic.isink_B_dcdc = dcdc; |
| break; |
| } |
| |
| pdev->dev.platform_data = pdata; |
| pdev->dev.parent = wm8350->dev; |
| ret = platform_device_add(pdev); |
| if (ret != 0) { |
| dev_err(wm8350->dev, "Failed to register LED %d: %d\n", |
| lednum, ret); |
| platform_device_put(pdev); |
| return ret; |
| } |
| |
| led->pdev = pdev; |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(wm8350_register_led); |
| |
| static struct platform_driver wm8350_regulator_driver = { |
| .probe = wm8350_regulator_probe, |
| .remove = wm8350_regulator_remove, |
| .driver = { |
| .name = "wm8350-regulator", |
| }, |
| }; |
| |
| static int __init wm8350_regulator_init(void) |
| { |
| return platform_driver_register(&wm8350_regulator_driver); |
| } |
| subsys_initcall(wm8350_regulator_init); |
| |
| static void __exit wm8350_regulator_exit(void) |
| { |
| platform_driver_unregister(&wm8350_regulator_driver); |
| } |
| module_exit(wm8350_regulator_exit); |
| |
| /* Module information */ |
| MODULE_AUTHOR("Liam Girdwood"); |
| MODULE_DESCRIPTION("WM8350 voltage and current regulator driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:wm8350-regulator"); |