| // SPDX-License-Identifier: GPL-2.0 |
| / { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "brcm,bcm7358"; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| mips-hpt-frequency = <375000000>; |
| |
| cpu@0 { |
| compatible = "brcm,bmips3300"; |
| device_type = "cpu"; |
| reg = <0>; |
| }; |
| }; |
| |
| aliases { |
| uart0 = &uart0; |
| }; |
| |
| cpu_intc: interrupt-controller { |
| #address-cells = <0>; |
| compatible = "mti,cpu-interrupt-controller"; |
| |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| }; |
| |
| clocks { |
| uart_clk: uart_clk { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <81000000>; |
| }; |
| |
| upg_clk: upg_clk { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <27000000>; |
| }; |
| }; |
| |
| rdb { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| compatible = "simple-bus"; |
| ranges = <0 0x10000000 0x01000000>; |
| |
| periph_intc: interrupt-controller@411400 { |
| compatible = "brcm,bcm7038-l1-intc"; |
| reg = <0x411400 0x30>; |
| |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| |
| interrupt-parent = <&cpu_intc>; |
| interrupts = <2>; |
| }; |
| |
| sun_l2_intc: interrupt-controller@403000 { |
| compatible = "brcm,l2-intc"; |
| reg = <0x403000 0x30>; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| interrupt-parent = <&periph_intc>; |
| interrupts = <48>; |
| }; |
| |
| gisb-arb@400000 { |
| compatible = "brcm,bcm7400-gisb-arb"; |
| reg = <0x400000 0xdc>; |
| native-endian; |
| interrupt-parent = <&sun_l2_intc>; |
| interrupts = <0>, <2>; |
| brcm,gisb-arb-master-mask = <0x2f3>; |
| brcm,gisb-arb-master-names = "ssp_0", "cpu_0", "bsp_0", |
| "rdc_0", "raaga_0", |
| "avd_0", "jtag_0"; |
| }; |
| |
| upg_irq0_intc: interrupt-controller@406600 { |
| compatible = "brcm,bcm7120-l2-intc"; |
| reg = <0x406600 0x8>; |
| |
| brcm,int-map-mask = <0x44>, <0x7000000>; |
| brcm,int-fwd-mask = <0x70000>; |
| |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| |
| interrupt-parent = <&periph_intc>; |
| interrupts = <56>, <54>; |
| interrupt-names = "upg_main", "upg_bsc"; |
| }; |
| |
| upg_aon_irq0_intc: interrupt-controller@408b80 { |
| compatible = "brcm,bcm7120-l2-intc"; |
| reg = <0x408b80 0x8>; |
| |
| brcm,int-map-mask = <0x40>, <0x8000000>, <0x100000>; |
| brcm,int-fwd-mask = <0>; |
| brcm,irq-can-wake; |
| |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| |
| interrupt-parent = <&periph_intc>; |
| interrupts = <57>, <55>, <59>; |
| interrupt-names = "upg_main_aon", "upg_bsc_aon", |
| "upg_spi"; |
| }; |
| |
| sun_top_ctrl: syscon@404000 { |
| compatible = "brcm,bcm7358-sun-top-ctrl", "syscon"; |
| reg = <0x404000 0x51c>; |
| native-endian; |
| }; |
| |
| reboot { |
| compatible = "brcm,brcmstb-reboot"; |
| syscon = <&sun_top_ctrl 0x304 0x308>; |
| }; |
| |
| uart0: serial@406800 { |
| compatible = "ns16550a"; |
| reg = <0x406800 0x20>; |
| reg-io-width = <0x4>; |
| reg-shift = <0x2>; |
| native-endian; |
| interrupt-parent = <&periph_intc>; |
| interrupts = <61>; |
| clocks = <&uart_clk>; |
| status = "disabled"; |
| }; |
| |
| uart1: serial@406840 { |
| compatible = "ns16550a"; |
| reg = <0x406840 0x20>; |
| reg-io-width = <0x4>; |
| reg-shift = <0x2>; |
| native-endian; |
| interrupt-parent = <&periph_intc>; |
| interrupts = <62>; |
| clocks = <&uart_clk>; |
| status = "disabled"; |
| }; |
| |
| uart2: serial@406880 { |
| compatible = "ns16550a"; |
| reg = <0x406880 0x20>; |
| reg-io-width = <0x4>; |
| reg-shift = <0x2>; |
| native-endian; |
| interrupt-parent = <&periph_intc>; |
| interrupts = <63>; |
| clocks = <&uart_clk>; |
| status = "disabled"; |
| }; |
| |
| bsca: i2c@406200 { |
| clock-frequency = <390000>; |
| compatible = "brcm,brcmstb-i2c"; |
| interrupt-parent = <&upg_irq0_intc>; |
| reg = <0x406200 0x58>; |
| interrupts = <24>; |
| interrupt-names = "upg_bsca"; |
| status = "disabled"; |
| }; |
| |
| bscb: i2c@406280 { |
| clock-frequency = <390000>; |
| compatible = "brcm,brcmstb-i2c"; |
| interrupt-parent = <&upg_irq0_intc>; |
| reg = <0x406280 0x58>; |
| interrupts = <25>; |
| interrupt-names = "upg_bscb"; |
| status = "disabled"; |
| }; |
| |
| bscc: i2c@406300 { |
| clock-frequency = <390000>; |
| compatible = "brcm,brcmstb-i2c"; |
| interrupt-parent = <&upg_irq0_intc>; |
| reg = <0x406300 0x58>; |
| interrupts = <26>; |
| interrupt-names = "upg_bscc"; |
| status = "disabled"; |
| }; |
| |
| bscd: i2c@408980 { |
| clock-frequency = <390000>; |
| compatible = "brcm,brcmstb-i2c"; |
| interrupt-parent = <&upg_aon_irq0_intc>; |
| reg = <0x408980 0x58>; |
| interrupts = <27>; |
| interrupt-names = "upg_bscd"; |
| status = "disabled"; |
| }; |
| |
| pwma: pwm@406400 { |
| compatible = "brcm,bcm7038-pwm"; |
| reg = <0x406400 0x28>; |
| #pwm-cells = <2>; |
| clocks = <&upg_clk>; |
| status = "disabled"; |
| }; |
| |
| pwmb: pwm@406700 { |
| compatible = "brcm,bcm7038-pwm"; |
| reg = <0x406700 0x28>; |
| #pwm-cells = <2>; |
| clocks = <&upg_clk>; |
| status = "disabled"; |
| }; |
| |
| watchdog: watchdog@4066a8 { |
| clocks = <&upg_clk>; |
| compatible = "brcm,bcm7038-wdt"; |
| reg = <0x4066a8 0x14>; |
| status = "disabled"; |
| }; |
| |
| aon_pm_l2_intc: interrupt-controller@408240 { |
| compatible = "brcm,l2-intc"; |
| reg = <0x408240 0x30>; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| interrupt-parent = <&periph_intc>; |
| interrupts = <50>; |
| brcm,irq-can-wake; |
| }; |
| |
| upg_gio: gpio@406500 { |
| compatible = "brcm,brcmstb-gpio"; |
| reg = <0x406500 0xa0>; |
| #gpio-cells = <2>; |
| #interrupt-cells = <2>; |
| gpio-controller; |
| interrupt-controller; |
| interrupt-parent = <&upg_irq0_intc>; |
| interrupts = <6>; |
| brcm,gpio-bank-widths = <32 32 32 29 4>; |
| }; |
| |
| upg_gio_aon: gpio@408c00 { |
| compatible = "brcm,brcmstb-gpio"; |
| reg = <0x408c00 0x60>; |
| #gpio-cells = <2>; |
| #interrupt-cells = <2>; |
| gpio-controller; |
| interrupt-controller; |
| interrupt-parent = <&upg_aon_irq0_intc>; |
| interrupts = <6>; |
| interrupts-extended = <&upg_aon_irq0_intc 6>, |
| <&aon_pm_l2_intc 5>; |
| wakeup-source; |
| brcm,gpio-bank-widths = <21 32 2>; |
| }; |
| |
| enet0: ethernet@430000 { |
| phy-mode = "internal"; |
| phy-handle = <&phy1>; |
| mac-address = [ 00 10 18 36 23 1a ]; |
| compatible = "brcm,genet-v2"; |
| #address-cells = <0x1>; |
| #size-cells = <0x1>; |
| reg = <0x430000 0x4c8c>; |
| interrupts = <24>, <25>; |
| interrupt-parent = <&periph_intc>; |
| status = "disabled"; |
| |
| mdio@e14 { |
| compatible = "brcm,genet-mdio-v2"; |
| #address-cells = <0x1>; |
| #size-cells = <0x0>; |
| reg = <0xe14 0x8>; |
| |
| phy1: ethernet-phy@1 { |
| max-speed = <100>; |
| reg = <0x1>; |
| compatible = "brcm,40nm-ephy", |
| "ethernet-phy-ieee802.3-c22"; |
| }; |
| }; |
| }; |
| |
| ehci0: usb@480300 { |
| compatible = "brcm,bcm7358-ehci", "generic-ehci"; |
| reg = <0x480300 0x100>; |
| native-endian; |
| interrupt-parent = <&periph_intc>; |
| interrupts = <65>; |
| status = "disabled"; |
| }; |
| |
| ohci0: usb@480400 { |
| compatible = "brcm,bcm7358-ohci", "generic-ohci"; |
| reg = <0x480400 0x100>; |
| native-endian; |
| no-big-frame-no; |
| interrupt-parent = <&periph_intc>; |
| interrupts = <66>; |
| status = "disabled"; |
| }; |
| |
| hif_l2_intc: interrupt-controller@411000 { |
| compatible = "brcm,l2-intc"; |
| reg = <0x411000 0x30>; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| interrupt-parent = <&periph_intc>; |
| interrupts = <30>; |
| }; |
| |
| nand: nand@412800 { |
| compatible = "brcm,brcmnand-v5.0", "brcm,brcmnand"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg-names = "nand"; |
| reg = <0x412800 0x400>; |
| interrupt-parent = <&hif_l2_intc>; |
| interrupts = <24>; |
| status = "disabled"; |
| }; |
| |
| spi_l2_intc: interrupt-controller@411d00 { |
| compatible = "brcm,l2-intc"; |
| reg = <0x411d00 0x30>; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| interrupt-parent = <&periph_intc>; |
| interrupts = <31>; |
| }; |
| |
| qspi: spi@413000 { |
| #address-cells = <0x1>; |
| #size-cells = <0x0>; |
| compatible = "brcm,spi-bcm-qspi", |
| "brcm,spi-brcmstb-qspi"; |
| clocks = <&upg_clk>; |
| reg = <0x410920 0x4 0x413200 0x188 0x413000 0x50>; |
| reg-names = "cs_reg", "hif_mspi", "bspi"; |
| interrupts = <0x0 0x1 0x2 0x3 0x4 0x5 0x6>; |
| interrupt-parent = <&spi_l2_intc>; |
| interrupt-names = "spi_lr_fullness_reached", |
| "spi_lr_session_aborted", |
| "spi_lr_impatient", |
| "spi_lr_session_done", |
| "spi_lr_overread", |
| "mspi_done", |
| "mspi_halted"; |
| status = "disabled"; |
| }; |
| |
| mspi: spi@408a00 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "brcm,spi-bcm-qspi", |
| "brcm,spi-brcmstb-mspi"; |
| clocks = <&upg_clk>; |
| reg = <0x408a00 0x180>; |
| reg-names = "mspi"; |
| interrupts = <0x14>; |
| interrupt-parent = <&upg_aon_irq0_intc>; |
| interrupt-names = "mspi_done"; |
| status = "disabled"; |
| }; |
| |
| waketimer: waketimer@408e80 { |
| compatible = "brcm,brcmstb-waketimer"; |
| reg = <0x408e80 0x14>; |
| interrupts = <0x3>; |
| interrupt-parent = <&aon_pm_l2_intc>; |
| interrupt-names = "timer"; |
| clocks = <&upg_clk>; |
| status = "disabled"; |
| }; |
| }; |
| }; |
