| /* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */ |
| /* Copyright(c) 2007 - 2012 Realtek Corporation. */ |
| |
| /*----------------------------------------------------------------------------- |
| |
| For type defines and data structure defines |
| |
| ------------------------------------------------------------------------------*/ |
| |
| #ifndef __DRV_TYPES_H__ |
| #define __DRV_TYPES_H__ |
| |
| #define DRV_NAME "r8188eu" |
| |
| #include "osdep_service.h" |
| #include "wlan_bssdef.h" |
| #include "rtw_ht.h" |
| #include "rtw_cmd.h" |
| #include "rtw_xmit.h" |
| #include "rtw_recv.h" |
| #include "hal_intf.h" |
| #include "hal_com.h" |
| #include "rtw_security.h" |
| #include "rtw_pwrctrl.h" |
| #include "rtw_io.h" |
| #include "rtw_eeprom.h" |
| #include "sta_info.h" |
| #include "rtw_mlme.h" |
| #include "rtw_debug.h" |
| #include "rtw_rf.h" |
| #include "rtw_event.h" |
| #include "rtw_led.h" |
| #include "rtw_mlme_ext.h" |
| #include "rtw_p2p.h" |
| #include "rtw_ap.h" |
| #include "rtw_br_ext.h" |
| |
| #define DRIVERVERSION "v4.1.4_6773.20130222" |
| |
| struct registry_priv { |
| u8 chip_version; |
| u8 rfintfs; |
| u8 lbkmode; |
| u8 hci; |
| struct ndis_802_11_ssid ssid; |
| u8 network_mode; /* infra, ad-hoc, auto */ |
| u8 channel;/* ad-hoc support requirement */ |
| u8 wireless_mode;/* A, B, G, auto */ |
| u8 scan_mode;/* active, passive */ |
| u8 radio_enable; |
| u8 preamble;/* long, short, auto */ |
| u8 vrtl_carrier_sense;/* Enable, Disable, Auto */ |
| u8 vcs_type;/* RTS/CTS, CTS-to-self */ |
| u16 rts_thresh; |
| u16 frag_thresh; |
| u8 adhoc_tx_pwr; |
| u8 soft_ap; |
| u8 power_mgnt; |
| u8 ips_mode; |
| u8 smart_ps; |
| u8 long_retry_lmt; |
| u8 short_retry_lmt; |
| u16 busy_thresh; |
| u8 ack_policy; |
| u8 software_encrypt; |
| u8 software_decrypt; |
| u8 acm_method; |
| /* UAPSD */ |
| u8 wmm_enable; |
| u8 uapsd_enable; |
| u8 uapsd_max_sp; |
| u8 uapsd_acbk_en; |
| u8 uapsd_acbe_en; |
| u8 uapsd_acvi_en; |
| u8 uapsd_acvo_en; |
| |
| u8 led_enable; |
| |
| struct wlan_bssid_ex dev_network; |
| |
| u8 ht_enable; |
| u8 cbw40_enable; |
| u8 ampdu_enable;/* for tx */ |
| u8 rx_stbc; |
| u8 ampdu_amsdu;/* A-MPDU Supports A-MSDU is permitted */ |
| u8 lowrate_two_xmit; |
| |
| u8 rf_config; |
| u8 low_power; |
| |
| u8 wifi_spec;/* !turbo_mode */ |
| |
| u8 channel_plan; |
| bool bAcceptAddbaReq; |
| |
| u8 antdiv_cfg; |
| u8 antdiv_type; |
| |
| u8 usbss_enable;/* 0:disable,1:enable */ |
| u8 hwpdn_mode;/* 0:disable,1:enable,2:decide by EFUSE config */ |
| u8 hwpwrp_detect;/* 0:disable,1:enable */ |
| |
| u8 hw_wps_pbc;/* 0:disable,1:enable */ |
| |
| u8 max_roaming_times; /* the max number driver will try */ |
| |
| u8 fw_iol; /* enable iol without other concern */ |
| |
| u8 enable80211d; |
| |
| u8 ifname[16]; |
| u8 if2name[16]; |
| |
| u8 notch_filter; |
| }; |
| |
| /* For registry parameters */ |
| #define RGTRY_OFT(field) ((u32)FIELD_OFFSET(struct registry_priv, field)) |
| #define RGTRY_SZ(field) sizeof(((struct registry_priv *)0)->field) |
| #define BSSID_OFT(field) ((u32)FIELD_OFFSET(struct wlan_bssid_ex, field)) |
| #define BSSID_SZ(field) sizeof(((struct wlan_bssid_ex *)0)->field) |
| |
| #define MAX_CONTINUAL_URB_ERR 4 |
| |
| struct rt_firmware { |
| u8 *szFwBuffer; |
| u32 ulFwLength; |
| }; |
| |
| struct dvobj_priv { |
| struct adapter *if1; |
| struct adapter *if2; |
| |
| /* For 92D, DMDP have 2 interface. */ |
| u8 InterfaceNumber; |
| u8 NumInterfaces; |
| |
| /* In /Out Pipe information */ |
| int RtInPipe[2]; |
| int RtOutPipe[3]; |
| u8 Queue2Pipe[HW_QUEUE_ENTRY];/* for out pipe mapping */ |
| |
| u8 irq_alloc; |
| |
| struct rt_firmware firmware; |
| |
| /*-------- below is for USB INTERFACE --------*/ |
| |
| u8 nr_endpoint; |
| u8 ishighspeed; |
| u8 RtNumInPipes; |
| u8 RtNumOutPipes; |
| int ep_num[5]; /* endpoint number */ |
| int RegUsbSS; |
| struct semaphore usb_suspend_sema; |
| struct mutex usb_vendor_req_mutex; |
| |
| struct usb_interface *pusbintf; |
| struct usb_device *pusbdev; |
| |
| atomic_t continual_urb_error; |
| u8 signal_strength; |
| }; |
| |
| static inline struct device *dvobj_to_dev(struct dvobj_priv *dvobj) |
| { |
| /* todo: get interface type from dvobj and the return |
| * the dev accordingly */ |
| return &dvobj->pusbintf->dev; |
| }; |
| |
| enum _IFACE_TYPE { |
| IFACE_PORT0, /* mapping to port0 for C/D series chips */ |
| IFACE_PORT1, /* mapping to port1 for C/D series chip */ |
| MAX_IFACE_PORT, |
| }; |
| |
| enum _ADAPTER_TYPE { |
| PRIMARY_ADAPTER, |
| SECONDARY_ADAPTER, |
| MAX_ADAPTER, |
| }; |
| |
| enum driver_state { |
| DRIVER_NORMAL = 0, |
| DRIVER_DISAPPEAR = 1, |
| DRIVER_REPLACE_DONGLE = 2, |
| }; |
| |
| struct adapter { |
| int DriverState;/* for disable driver using module, use dongle toi |
| * replace module. */ |
| int pid[3];/* process id from UI, 0:wps, 1:hostapd, 2:dhcpcd */ |
| int bDongle;/* build-in module or external dongle */ |
| |
| struct dvobj_priv *dvobj; |
| struct mlme_priv mlmepriv; |
| struct mlme_ext_priv mlmeextpriv; |
| struct cmd_priv cmdpriv; |
| struct evt_priv evtpriv; |
| struct io_priv iopriv; |
| struct xmit_priv xmitpriv; |
| struct recv_priv recvpriv; |
| struct sta_priv stapriv; |
| struct security_priv securitypriv; |
| struct registry_priv registrypriv; |
| struct pwrctrl_priv pwrctrlpriv; |
| struct eeprom_priv eeprompriv; |
| struct led_priv ledpriv; |
| struct hostapd_priv *phostapdpriv; |
| struct wifidirect_info wdinfo; |
| |
| void *HalData; |
| u32 hal_data_sz; |
| |
| s32 bDriverStopped; |
| s32 bSurpriseRemoved; |
| s32 bCardDisableWOHSM; |
| |
| u32 IsrContent; |
| u32 ImrContent; |
| |
| u8 EepromAddressSize; |
| u8 hw_init_completed; |
| u8 bDriverIsGoingToUnload; |
| u8 init_adpt_in_progress; |
| u8 bHaltInProgress; |
| s8 signal_strength; |
| |
| void *cmdThread; |
| void *evtThread; |
| void *xmitThread; |
| void *recvThread; |
| void (*intf_start)(struct adapter *adapter); |
| void (*intf_stop)(struct adapter *adapter); |
| struct net_device *pnetdev; |
| |
| /* used by rtw_rereg_nd_name related function */ |
| struct rereg_nd_name_data { |
| struct net_device *old_pnetdev; |
| char old_ifname[IFNAMSIZ]; |
| u8 old_ips_mode; |
| u8 old_bRegUseLed; |
| } rereg_nd_name_priv; |
| |
| int bup; |
| struct net_device_stats stats; |
| struct iw_statistics iwstats; |
| struct proc_dir_entry *dir_dev;/* for proc directory */ |
| |
| int net_closed; |
| u8 bFWReady; |
| u8 bBTFWReady; |
| u8 bReadPortCancel; |
| u8 bWritePortCancel; |
| u8 bRxRSSIDisplay; |
| /* The driver will show up the desired channel number |
| * when this flag is 1. */ |
| u8 bNotifyChannelChange; |
| /* The driver will show the current P2P status when the |
| * upper application reads it. */ |
| u8 bShowGetP2PState; |
| struct adapter *pbuddy_adapter; |
| |
| struct mutex *hw_init_mutex; |
| |
| spinlock_t br_ext_lock; |
| struct nat25_network_db_entry *nethash[NAT25_HASH_SIZE]; |
| int pppoe_connection_in_progress; |
| unsigned char pppoe_addr[ETH_ALEN]; |
| unsigned char scdb_mac[ETH_ALEN]; |
| unsigned char scdb_ip[4]; |
| struct nat25_network_db_entry *scdb_entry; |
| unsigned char br_mac[ETH_ALEN]; |
| unsigned char br_ip[4]; |
| struct br_ext_info ethBrExtInfo; |
| |
| u8 fix_rate; |
| |
| unsigned char in_cta_test; |
| }; |
| |
| #define adapter_to_dvobj(adapter) (adapter->dvobj) |
| |
| int rtw_handle_dualmac(struct adapter *adapter, bool init); |
| |
| static inline u8 *myid(struct eeprom_priv *peepriv) |
| { |
| return peepriv->mac_addr; |
| } |
| |
| #endif /* __DRV_TYPES_H__ */ |