| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * ILITEK Touch IC driver for 23XX, 25XX and Lego series |
| * |
| * Copyright (C) 2011 ILI Technology Corporation. |
| * Copyright (C) 2020 Luca Hsu <luca_hsu@ilitek.com> |
| * Copyright (C) 2021 Joe Hung <joe_hung@ilitek.com> |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/input.h> |
| #include <linux/input/mt.h> |
| #include <linux/i2c.h> |
| #include <linux/slab.h> |
| #include <linux/delay.h> |
| #include <linux/interrupt.h> |
| #include <linux/gpio.h> |
| #include <linux/gpio/consumer.h> |
| #include <linux/errno.h> |
| #include <linux/acpi.h> |
| #include <linux/input/touchscreen.h> |
| #include <asm/unaligned.h> |
| |
| |
| #define ILITEK_TS_NAME "ilitek_ts" |
| #define BL_V1_8 0x108 |
| #define BL_V1_7 0x107 |
| #define BL_V1_6 0x106 |
| |
| #define ILITEK_TP_CMD_GET_TP_RES 0x20 |
| #define ILITEK_TP_CMD_GET_SCRN_RES 0x21 |
| #define ILITEK_TP_CMD_SET_IC_SLEEP 0x30 |
| #define ILITEK_TP_CMD_SET_IC_WAKE 0x31 |
| #define ILITEK_TP_CMD_GET_FW_VER 0x40 |
| #define ILITEK_TP_CMD_GET_PRL_VER 0x42 |
| #define ILITEK_TP_CMD_GET_MCU_VER 0x61 |
| #define ILITEK_TP_CMD_GET_IC_MODE 0xC0 |
| |
| #define REPORT_COUNT_ADDRESS 61 |
| #define ILITEK_SUPPORT_MAX_POINT 40 |
| |
| struct ilitek_protocol_info { |
| u16 ver; |
| u8 ver_major; |
| }; |
| |
| struct ilitek_ts_data { |
| struct i2c_client *client; |
| struct gpio_desc *reset_gpio; |
| struct input_dev *input_dev; |
| struct touchscreen_properties prop; |
| |
| const struct ilitek_protocol_map *ptl_cb_func; |
| struct ilitek_protocol_info ptl; |
| |
| char product_id[30]; |
| u16 mcu_ver; |
| u8 ic_mode; |
| u8 firmware_ver[8]; |
| |
| s32 reset_time; |
| s32 screen_max_x; |
| s32 screen_max_y; |
| s32 screen_min_x; |
| s32 screen_min_y; |
| s32 max_tp; |
| }; |
| |
| struct ilitek_protocol_map { |
| u16 cmd; |
| const char *name; |
| int (*func)(struct ilitek_ts_data *ts, u16 cmd, u8 *inbuf, u8 *outbuf); |
| }; |
| |
| enum ilitek_cmds { |
| /* common cmds */ |
| GET_PTL_VER = 0, |
| GET_FW_VER, |
| GET_SCRN_RES, |
| GET_TP_RES, |
| GET_IC_MODE, |
| GET_MCU_VER, |
| SET_IC_SLEEP, |
| SET_IC_WAKE, |
| |
| /* ALWAYS keep at the end */ |
| MAX_CMD_CNT |
| }; |
| |
| /* ILITEK I2C R/W APIs */ |
| static int ilitek_i2c_write_and_read(struct ilitek_ts_data *ts, |
| u8 *cmd, int write_len, int delay, |
| u8 *data, int read_len) |
| { |
| int error; |
| struct i2c_client *client = ts->client; |
| struct i2c_msg msgs[] = { |
| { |
| .addr = client->addr, |
| .flags = 0, |
| .len = write_len, |
| .buf = cmd, |
| }, |
| { |
| .addr = client->addr, |
| .flags = I2C_M_RD, |
| .len = read_len, |
| .buf = data, |
| }, |
| }; |
| |
| if (delay == 0 && write_len > 0 && read_len > 0) { |
| error = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); |
| if (error < 0) |
| return error; |
| } else { |
| if (write_len > 0) { |
| error = i2c_transfer(client->adapter, msgs, 1); |
| if (error < 0) |
| return error; |
| } |
| if (delay > 0) |
| mdelay(delay); |
| |
| if (read_len > 0) { |
| error = i2c_transfer(client->adapter, msgs + 1, 1); |
| if (error < 0) |
| return error; |
| } |
| } |
| |
| return 0; |
| } |
| |
| /* ILITEK ISR APIs */ |
| static void ilitek_touch_down(struct ilitek_ts_data *ts, unsigned int id, |
| unsigned int x, unsigned int y) |
| { |
| struct input_dev *input = ts->input_dev; |
| |
| input_mt_slot(input, id); |
| input_mt_report_slot_state(input, MT_TOOL_FINGER, true); |
| |
| touchscreen_report_pos(input, &ts->prop, x, y, true); |
| } |
| |
| static int ilitek_process_and_report_v6(struct ilitek_ts_data *ts) |
| { |
| int error = 0; |
| u8 buf[512]; |
| int packet_len = 5; |
| int packet_max_point = 10; |
| int report_max_point; |
| int i, count; |
| struct input_dev *input = ts->input_dev; |
| struct device *dev = &ts->client->dev; |
| unsigned int x, y, status, id; |
| |
| error = ilitek_i2c_write_and_read(ts, NULL, 0, 0, buf, 64); |
| if (error) { |
| dev_err(dev, "get touch info failed, err:%d\n", error); |
| goto err_sync_frame; |
| } |
| |
| report_max_point = buf[REPORT_COUNT_ADDRESS]; |
| if (report_max_point > ts->max_tp) { |
| dev_err(dev, "FW report max point:%d > panel info. max:%d\n", |
| report_max_point, ts->max_tp); |
| error = -EINVAL; |
| goto err_sync_frame; |
| } |
| |
| count = DIV_ROUND_UP(report_max_point, packet_max_point); |
| for (i = 1; i < count; i++) { |
| error = ilitek_i2c_write_and_read(ts, NULL, 0, 0, |
| buf + i * 64, 64); |
| if (error) { |
| dev_err(dev, "get touch info. failed, cnt:%d, err:%d\n", |
| count, error); |
| goto err_sync_frame; |
| } |
| } |
| |
| for (i = 0; i < report_max_point; i++) { |
| status = buf[i * packet_len + 1] & 0x40; |
| if (!status) |
| continue; |
| |
| id = buf[i * packet_len + 1] & 0x3F; |
| |
| x = get_unaligned_le16(buf + i * packet_len + 2); |
| y = get_unaligned_le16(buf + i * packet_len + 4); |
| |
| if (x > ts->screen_max_x || x < ts->screen_min_x || |
| y > ts->screen_max_y || y < ts->screen_min_y) { |
| dev_warn(dev, "invalid position, X[%d,%u,%d], Y[%d,%u,%d]\n", |
| ts->screen_min_x, x, ts->screen_max_x, |
| ts->screen_min_y, y, ts->screen_max_y); |
| continue; |
| } |
| |
| ilitek_touch_down(ts, id, x, y); |
| } |
| |
| err_sync_frame: |
| input_mt_sync_frame(input); |
| input_sync(input); |
| return error; |
| } |
| |
| /* APIs of cmds for ILITEK Touch IC */ |
| static int api_protocol_set_cmd(struct ilitek_ts_data *ts, |
| u16 idx, u8 *inbuf, u8 *outbuf) |
| { |
| u16 cmd; |
| int error; |
| |
| if (idx >= MAX_CMD_CNT) |
| return -EINVAL; |
| |
| cmd = ts->ptl_cb_func[idx].cmd; |
| error = ts->ptl_cb_func[idx].func(ts, cmd, inbuf, outbuf); |
| if (error) |
| return error; |
| |
| return 0; |
| } |
| |
| static int api_protocol_get_ptl_ver(struct ilitek_ts_data *ts, |
| u16 cmd, u8 *inbuf, u8 *outbuf) |
| { |
| int error; |
| u8 buf[64]; |
| |
| buf[0] = cmd; |
| error = ilitek_i2c_write_and_read(ts, buf, 1, 5, outbuf, 3); |
| if (error) |
| return error; |
| |
| ts->ptl.ver = get_unaligned_be16(outbuf); |
| ts->ptl.ver_major = outbuf[0]; |
| |
| return 0; |
| } |
| |
| static int api_protocol_get_mcu_ver(struct ilitek_ts_data *ts, |
| u16 cmd, u8 *inbuf, u8 *outbuf) |
| { |
| int error; |
| u8 buf[64]; |
| |
| buf[0] = cmd; |
| error = ilitek_i2c_write_and_read(ts, buf, 1, 5, outbuf, 32); |
| if (error) |
| return error; |
| |
| ts->mcu_ver = get_unaligned_le16(outbuf); |
| memset(ts->product_id, 0, sizeof(ts->product_id)); |
| memcpy(ts->product_id, outbuf + 6, 26); |
| |
| return 0; |
| } |
| |
| static int api_protocol_get_fw_ver(struct ilitek_ts_data *ts, |
| u16 cmd, u8 *inbuf, u8 *outbuf) |
| { |
| int error; |
| u8 buf[64]; |
| |
| buf[0] = cmd; |
| error = ilitek_i2c_write_and_read(ts, buf, 1, 5, outbuf, 8); |
| if (error) |
| return error; |
| |
| memcpy(ts->firmware_ver, outbuf, 8); |
| |
| return 0; |
| } |
| |
| static int api_protocol_get_scrn_res(struct ilitek_ts_data *ts, |
| u16 cmd, u8 *inbuf, u8 *outbuf) |
| { |
| int error; |
| u8 buf[64]; |
| |
| buf[0] = cmd; |
| error = ilitek_i2c_write_and_read(ts, buf, 1, 5, outbuf, 8); |
| if (error) |
| return error; |
| |
| ts->screen_min_x = get_unaligned_le16(outbuf); |
| ts->screen_min_y = get_unaligned_le16(outbuf + 2); |
| ts->screen_max_x = get_unaligned_le16(outbuf + 4); |
| ts->screen_max_y = get_unaligned_le16(outbuf + 6); |
| |
| return 0; |
| } |
| |
| static int api_protocol_get_tp_res(struct ilitek_ts_data *ts, |
| u16 cmd, u8 *inbuf, u8 *outbuf) |
| { |
| int error; |
| u8 buf[64]; |
| |
| buf[0] = cmd; |
| error = ilitek_i2c_write_and_read(ts, buf, 1, 5, outbuf, 15); |
| if (error) |
| return error; |
| |
| ts->max_tp = outbuf[8]; |
| if (ts->max_tp > ILITEK_SUPPORT_MAX_POINT) { |
| dev_err(&ts->client->dev, "Invalid MAX_TP:%d from FW\n", |
| ts->max_tp); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int api_protocol_get_ic_mode(struct ilitek_ts_data *ts, |
| u16 cmd, u8 *inbuf, u8 *outbuf) |
| { |
| int error; |
| u8 buf[64]; |
| |
| buf[0] = cmd; |
| error = ilitek_i2c_write_and_read(ts, buf, 1, 5, outbuf, 2); |
| if (error) |
| return error; |
| |
| ts->ic_mode = outbuf[0]; |
| return 0; |
| } |
| |
| static int api_protocol_set_ic_sleep(struct ilitek_ts_data *ts, |
| u16 cmd, u8 *inbuf, u8 *outbuf) |
| { |
| u8 buf[64]; |
| |
| buf[0] = cmd; |
| return ilitek_i2c_write_and_read(ts, buf, 1, 0, NULL, 0); |
| } |
| |
| static int api_protocol_set_ic_wake(struct ilitek_ts_data *ts, |
| u16 cmd, u8 *inbuf, u8 *outbuf) |
| { |
| u8 buf[64]; |
| |
| buf[0] = cmd; |
| return ilitek_i2c_write_and_read(ts, buf, 1, 0, NULL, 0); |
| } |
| |
| static const struct ilitek_protocol_map ptl_func_map[] = { |
| /* common cmds */ |
| [GET_PTL_VER] = { |
| ILITEK_TP_CMD_GET_PRL_VER, "GET_PTL_VER", |
| api_protocol_get_ptl_ver |
| }, |
| [GET_FW_VER] = { |
| ILITEK_TP_CMD_GET_FW_VER, "GET_FW_VER", |
| api_protocol_get_fw_ver |
| }, |
| [GET_SCRN_RES] = { |
| ILITEK_TP_CMD_GET_SCRN_RES, "GET_SCRN_RES", |
| api_protocol_get_scrn_res |
| }, |
| [GET_TP_RES] = { |
| ILITEK_TP_CMD_GET_TP_RES, "GET_TP_RES", |
| api_protocol_get_tp_res |
| }, |
| [GET_IC_MODE] = { |
| ILITEK_TP_CMD_GET_IC_MODE, "GET_IC_MODE", |
| api_protocol_get_ic_mode |
| }, |
| [GET_MCU_VER] = { |
| ILITEK_TP_CMD_GET_MCU_VER, "GET_MOD_VER", |
| api_protocol_get_mcu_ver |
| }, |
| [SET_IC_SLEEP] = { |
| ILITEK_TP_CMD_SET_IC_SLEEP, "SET_IC_SLEEP", |
| api_protocol_set_ic_sleep |
| }, |
| [SET_IC_WAKE] = { |
| ILITEK_TP_CMD_SET_IC_WAKE, "SET_IC_WAKE", |
| api_protocol_set_ic_wake |
| }, |
| }; |
| |
| /* Probe APIs */ |
| static void ilitek_reset(struct ilitek_ts_data *ts, int delay) |
| { |
| if (ts->reset_gpio) { |
| gpiod_set_value(ts->reset_gpio, 1); |
| mdelay(10); |
| gpiod_set_value(ts->reset_gpio, 0); |
| mdelay(delay); |
| } |
| } |
| |
| static int ilitek_protocol_init(struct ilitek_ts_data *ts) |
| { |
| int error; |
| u8 outbuf[64]; |
| |
| ts->ptl_cb_func = ptl_func_map; |
| ts->reset_time = 600; |
| |
| error = api_protocol_set_cmd(ts, GET_PTL_VER, NULL, outbuf); |
| if (error) |
| return error; |
| |
| /* Protocol v3 is not support currently */ |
| if (ts->ptl.ver_major == 0x3 || |
| ts->ptl.ver == BL_V1_6 || |
| ts->ptl.ver == BL_V1_7) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| static int ilitek_read_tp_info(struct ilitek_ts_data *ts, bool boot) |
| { |
| u8 outbuf[256]; |
| int error; |
| |
| error = api_protocol_set_cmd(ts, GET_PTL_VER, NULL, outbuf); |
| if (error) |
| return error; |
| |
| error = api_protocol_set_cmd(ts, GET_MCU_VER, NULL, outbuf); |
| if (error) |
| return error; |
| |
| error = api_protocol_set_cmd(ts, GET_FW_VER, NULL, outbuf); |
| if (error) |
| return error; |
| |
| if (boot) { |
| error = api_protocol_set_cmd(ts, GET_SCRN_RES, NULL, |
| outbuf); |
| if (error) |
| return error; |
| } |
| |
| error = api_protocol_set_cmd(ts, GET_TP_RES, NULL, outbuf); |
| if (error) |
| return error; |
| |
| error = api_protocol_set_cmd(ts, GET_IC_MODE, NULL, outbuf); |
| if (error) |
| return error; |
| |
| return 0; |
| } |
| |
| static int ilitek_input_dev_init(struct device *dev, struct ilitek_ts_data *ts) |
| { |
| int error; |
| struct input_dev *input; |
| |
| input = devm_input_allocate_device(dev); |
| if (!input) |
| return -ENOMEM; |
| |
| ts->input_dev = input; |
| input->name = ILITEK_TS_NAME; |
| input->id.bustype = BUS_I2C; |
| |
| __set_bit(INPUT_PROP_DIRECT, input->propbit); |
| |
| input_set_abs_params(input, ABS_MT_POSITION_X, |
| ts->screen_min_x, ts->screen_max_x, 0, 0); |
| input_set_abs_params(input, ABS_MT_POSITION_Y, |
| ts->screen_min_y, ts->screen_max_y, 0, 0); |
| |
| touchscreen_parse_properties(input, true, &ts->prop); |
| |
| error = input_mt_init_slots(input, ts->max_tp, |
| INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED); |
| if (error) { |
| dev_err(dev, "initialize MT slots failed, err:%d\n", error); |
| return error; |
| } |
| |
| error = input_register_device(input); |
| if (error) { |
| dev_err(dev, "register input device failed, err:%d\n", error); |
| return error; |
| } |
| |
| return 0; |
| } |
| |
| static irqreturn_t ilitek_i2c_isr(int irq, void *dev_id) |
| { |
| struct ilitek_ts_data *ts = dev_id; |
| int error; |
| |
| error = ilitek_process_and_report_v6(ts); |
| if (error < 0) { |
| dev_err(&ts->client->dev, "[%s] err:%d\n", __func__, error); |
| return IRQ_NONE; |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| static ssize_t firmware_version_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct ilitek_ts_data *ts = i2c_get_clientdata(client); |
| |
| return scnprintf(buf, PAGE_SIZE, |
| "fw version: [%02X%02X.%02X%02X.%02X%02X.%02X%02X]\n", |
| ts->firmware_ver[0], ts->firmware_ver[1], |
| ts->firmware_ver[2], ts->firmware_ver[3], |
| ts->firmware_ver[4], ts->firmware_ver[5], |
| ts->firmware_ver[6], ts->firmware_ver[7]); |
| } |
| static DEVICE_ATTR_RO(firmware_version); |
| |
| static ssize_t product_id_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct ilitek_ts_data *ts = i2c_get_clientdata(client); |
| |
| return scnprintf(buf, PAGE_SIZE, "product id: [%04X], module: [%s]\n", |
| ts->mcu_ver, ts->product_id); |
| } |
| static DEVICE_ATTR_RO(product_id); |
| |
| static struct attribute *ilitek_sysfs_attrs[] = { |
| &dev_attr_firmware_version.attr, |
| &dev_attr_product_id.attr, |
| NULL |
| }; |
| |
| static struct attribute_group ilitek_attrs_group = { |
| .attrs = ilitek_sysfs_attrs, |
| }; |
| |
| static int ilitek_ts_i2c_probe(struct i2c_client *client) |
| { |
| struct ilitek_ts_data *ts; |
| struct device *dev = &client->dev; |
| int error; |
| |
| if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { |
| dev_err(dev, "i2c check functionality failed\n"); |
| return -ENXIO; |
| } |
| |
| ts = devm_kzalloc(dev, sizeof(*ts), GFP_KERNEL); |
| if (!ts) |
| return -ENOMEM; |
| |
| ts->client = client; |
| i2c_set_clientdata(client, ts); |
| |
| ts->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); |
| if (IS_ERR(ts->reset_gpio)) { |
| error = PTR_ERR(ts->reset_gpio); |
| dev_err(dev, "request gpiod failed: %d", error); |
| return error; |
| } |
| |
| ilitek_reset(ts, 1000); |
| |
| error = ilitek_protocol_init(ts); |
| if (error) { |
| dev_err(dev, "protocol init failed: %d", error); |
| return error; |
| } |
| |
| error = ilitek_read_tp_info(ts, true); |
| if (error) { |
| dev_err(dev, "read tp info failed: %d", error); |
| return error; |
| } |
| |
| error = ilitek_input_dev_init(dev, ts); |
| if (error) { |
| dev_err(dev, "input dev init failed: %d", error); |
| return error; |
| } |
| |
| error = devm_request_threaded_irq(dev, ts->client->irq, |
| NULL, ilitek_i2c_isr, IRQF_ONESHOT, |
| "ilitek_touch_irq", ts); |
| if (error) { |
| dev_err(dev, "request threaded irq failed: %d\n", error); |
| return error; |
| } |
| |
| error = devm_device_add_group(dev, &ilitek_attrs_group); |
| if (error) { |
| dev_err(dev, "sysfs create group failed: %d\n", error); |
| return error; |
| } |
| |
| return 0; |
| } |
| |
| static int ilitek_suspend(struct device *dev) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct ilitek_ts_data *ts = i2c_get_clientdata(client); |
| int error; |
| |
| disable_irq(client->irq); |
| |
| if (!device_may_wakeup(dev)) { |
| error = api_protocol_set_cmd(ts, SET_IC_SLEEP, NULL, NULL); |
| if (error) |
| return error; |
| } |
| |
| return 0; |
| } |
| |
| static int ilitek_resume(struct device *dev) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct ilitek_ts_data *ts = i2c_get_clientdata(client); |
| int error; |
| |
| if (!device_may_wakeup(dev)) { |
| error = api_protocol_set_cmd(ts, SET_IC_WAKE, NULL, NULL); |
| if (error) |
| return error; |
| |
| ilitek_reset(ts, ts->reset_time); |
| } |
| |
| enable_irq(client->irq); |
| |
| return 0; |
| } |
| |
| static DEFINE_SIMPLE_DEV_PM_OPS(ilitek_pm_ops, ilitek_suspend, ilitek_resume); |
| |
| static const struct i2c_device_id ilitek_ts_i2c_id[] = { |
| { ILITEK_TS_NAME, 0 }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(i2c, ilitek_ts_i2c_id); |
| |
| #ifdef CONFIG_ACPI |
| static const struct acpi_device_id ilitekts_acpi_id[] = { |
| { "ILTK0001", 0 }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(acpi, ilitekts_acpi_id); |
| #endif |
| |
| #ifdef CONFIG_OF |
| static const struct of_device_id ilitek_ts_i2c_match[] = { |
| {.compatible = "ilitek,ili2130",}, |
| {.compatible = "ilitek,ili2131",}, |
| {.compatible = "ilitek,ili2132",}, |
| {.compatible = "ilitek,ili2316",}, |
| {.compatible = "ilitek,ili2322",}, |
| {.compatible = "ilitek,ili2323",}, |
| {.compatible = "ilitek,ili2326",}, |
| {.compatible = "ilitek,ili2520",}, |
| {.compatible = "ilitek,ili2521",}, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(of, ilitek_ts_i2c_match); |
| #endif |
| |
| static struct i2c_driver ilitek_ts_i2c_driver = { |
| .driver = { |
| .name = ILITEK_TS_NAME, |
| .pm = pm_sleep_ptr(&ilitek_pm_ops), |
| .of_match_table = of_match_ptr(ilitek_ts_i2c_match), |
| .acpi_match_table = ACPI_PTR(ilitekts_acpi_id), |
| }, |
| .probe_new = ilitek_ts_i2c_probe, |
| .id_table = ilitek_ts_i2c_id, |
| }; |
| module_i2c_driver(ilitek_ts_i2c_driver); |
| |
| MODULE_AUTHOR("ILITEK"); |
| MODULE_DESCRIPTION("ILITEK I2C Touchscreen Driver"); |
| MODULE_LICENSE("GPL"); |