| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * processor_thermal.c - Passive cooling submodule of the ACPI processor driver |
| * |
| * Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com> |
| * Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com> |
| * Copyright (C) 2004 Dominik Brodowski <linux@brodo.de> |
| * Copyright (C) 2004 Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> |
| * - Added processor hotplug support |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/cpufreq.h> |
| #include <linux/acpi.h> |
| #include <acpi/processor.h> |
| #include <linux/uaccess.h> |
| |
| #define PREFIX "ACPI: " |
| |
| #define ACPI_PROCESSOR_CLASS "processor" |
| #define _COMPONENT ACPI_PROCESSOR_COMPONENT |
| ACPI_MODULE_NAME("processor_thermal"); |
| |
| #ifdef CONFIG_CPU_FREQ |
| |
| /* If a passive cooling situation is detected, primarily CPUfreq is used, as it |
| * offers (in most cases) voltage scaling in addition to frequency scaling, and |
| * thus a cubic (instead of linear) reduction of energy. Also, we allow for |
| * _any_ cpufreq driver and not only the acpi-cpufreq driver. |
| */ |
| |
| #define CPUFREQ_THERMAL_MIN_STEP 0 |
| #define CPUFREQ_THERMAL_MAX_STEP 3 |
| |
| static DEFINE_PER_CPU(unsigned int, cpufreq_thermal_reduction_pctg); |
| |
| #define reduction_pctg(cpu) \ |
| per_cpu(cpufreq_thermal_reduction_pctg, phys_package_first_cpu(cpu)) |
| |
| /* |
| * Emulate "per package data" using per cpu data (which should really be |
| * provided elsewhere) |
| * |
| * Note we can lose a CPU on cpu hotunplug, in this case we forget the state |
| * temporarily. Fortunately that's not a big issue here (I hope) |
| */ |
| static int phys_package_first_cpu(int cpu) |
| { |
| int i; |
| int id = topology_physical_package_id(cpu); |
| |
| for_each_online_cpu(i) |
| if (topology_physical_package_id(i) == id) |
| return i; |
| return 0; |
| } |
| |
| static int cpu_has_cpufreq(unsigned int cpu) |
| { |
| struct cpufreq_policy policy; |
| if (!acpi_processor_cpufreq_init || cpufreq_get_policy(&policy, cpu)) |
| return 0; |
| return 1; |
| } |
| |
| static int cpufreq_get_max_state(unsigned int cpu) |
| { |
| if (!cpu_has_cpufreq(cpu)) |
| return 0; |
| |
| return CPUFREQ_THERMAL_MAX_STEP; |
| } |
| |
| static int cpufreq_get_cur_state(unsigned int cpu) |
| { |
| if (!cpu_has_cpufreq(cpu)) |
| return 0; |
| |
| return reduction_pctg(cpu); |
| } |
| |
| static int cpufreq_set_cur_state(unsigned int cpu, int state) |
| { |
| struct cpufreq_policy *policy; |
| struct acpi_processor *pr; |
| unsigned long max_freq; |
| int i, ret; |
| |
| if (!cpu_has_cpufreq(cpu)) |
| return 0; |
| |
| reduction_pctg(cpu) = state; |
| |
| /* |
| * Update all the CPUs in the same package because they all |
| * contribute to the temperature and often share the same |
| * frequency. |
| */ |
| for_each_online_cpu(i) { |
| if (topology_physical_package_id(i) != |
| topology_physical_package_id(cpu)) |
| continue; |
| |
| pr = per_cpu(processors, i); |
| |
| if (unlikely(!freq_qos_request_active(&pr->thermal_req))) |
| continue; |
| |
| policy = cpufreq_cpu_get(i); |
| if (!policy) |
| return -EINVAL; |
| |
| max_freq = (policy->cpuinfo.max_freq * (100 - reduction_pctg(i) * 20)) / 100; |
| |
| cpufreq_cpu_put(policy); |
| |
| ret = freq_qos_update_request(&pr->thermal_req, max_freq); |
| if (ret < 0) { |
| pr_warn("Failed to update thermal freq constraint: CPU%d (%d)\n", |
| pr->id, ret); |
| } |
| } |
| return 0; |
| } |
| |
| void acpi_thermal_cpufreq_init(struct cpufreq_policy *policy) |
| { |
| unsigned int cpu; |
| |
| for_each_cpu(cpu, policy->related_cpus) { |
| struct acpi_processor *pr = per_cpu(processors, cpu); |
| int ret; |
| |
| if (!pr) |
| continue; |
| |
| ret = freq_qos_add_request(&policy->constraints, |
| &pr->thermal_req, |
| FREQ_QOS_MAX, INT_MAX); |
| if (ret < 0) |
| pr_err("Failed to add freq constraint for CPU%d (%d)\n", |
| cpu, ret); |
| } |
| } |
| |
| void acpi_thermal_cpufreq_exit(struct cpufreq_policy *policy) |
| { |
| unsigned int cpu; |
| |
| for_each_cpu(cpu, policy->related_cpus) { |
| struct acpi_processor *pr = per_cpu(processors, policy->cpu); |
| |
| if (pr) |
| freq_qos_remove_request(&pr->thermal_req); |
| } |
| } |
| #else /* ! CONFIG_CPU_FREQ */ |
| static int cpufreq_get_max_state(unsigned int cpu) |
| { |
| return 0; |
| } |
| |
| static int cpufreq_get_cur_state(unsigned int cpu) |
| { |
| return 0; |
| } |
| |
| static int cpufreq_set_cur_state(unsigned int cpu, int state) |
| { |
| return 0; |
| } |
| |
| #endif |
| |
| /* thermal cooling device callbacks */ |
| static int acpi_processor_max_state(struct acpi_processor *pr) |
| { |
| int max_state = 0; |
| |
| /* |
| * There exists four states according to |
| * cpufreq_thermal_reduction_pctg. 0, 1, 2, 3 |
| */ |
| max_state += cpufreq_get_max_state(pr->id); |
| if (pr->flags.throttling) |
| max_state += (pr->throttling.state_count -1); |
| |
| return max_state; |
| } |
| static int |
| processor_get_max_state(struct thermal_cooling_device *cdev, |
| unsigned long *state) |
| { |
| struct acpi_device *device = cdev->devdata; |
| struct acpi_processor *pr; |
| |
| if (!device) |
| return -EINVAL; |
| |
| pr = acpi_driver_data(device); |
| if (!pr) |
| return -EINVAL; |
| |
| *state = acpi_processor_max_state(pr); |
| return 0; |
| } |
| |
| static int |
| processor_get_cur_state(struct thermal_cooling_device *cdev, |
| unsigned long *cur_state) |
| { |
| struct acpi_device *device = cdev->devdata; |
| struct acpi_processor *pr; |
| |
| if (!device) |
| return -EINVAL; |
| |
| pr = acpi_driver_data(device); |
| if (!pr) |
| return -EINVAL; |
| |
| *cur_state = cpufreq_get_cur_state(pr->id); |
| if (pr->flags.throttling) |
| *cur_state += pr->throttling.state; |
| return 0; |
| } |
| |
| static int |
| processor_set_cur_state(struct thermal_cooling_device *cdev, |
| unsigned long state) |
| { |
| struct acpi_device *device = cdev->devdata; |
| struct acpi_processor *pr; |
| int result = 0; |
| int max_pstate; |
| |
| if (!device) |
| return -EINVAL; |
| |
| pr = acpi_driver_data(device); |
| if (!pr) |
| return -EINVAL; |
| |
| max_pstate = cpufreq_get_max_state(pr->id); |
| |
| if (state > acpi_processor_max_state(pr)) |
| return -EINVAL; |
| |
| if (state <= max_pstate) { |
| if (pr->flags.throttling && pr->throttling.state) |
| result = acpi_processor_set_throttling(pr, 0, false); |
| cpufreq_set_cur_state(pr->id, state); |
| } else { |
| cpufreq_set_cur_state(pr->id, max_pstate); |
| result = acpi_processor_set_throttling(pr, |
| state - max_pstate, false); |
| } |
| return result; |
| } |
| |
| const struct thermal_cooling_device_ops processor_cooling_ops = { |
| .get_max_state = processor_get_max_state, |
| .get_cur_state = processor_get_cur_state, |
| .set_cur_state = processor_set_cur_state, |
| }; |