| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * SGI IOC3 multifunction device driver |
| * |
| * Copyright (C) 2018, 2019 Thomas Bogendoerfer <tbogendoerfer@suse.de> |
| * |
| * Based on work by: |
| * Stanislaw Skowronek <skylark@unaligned.org> |
| * Joshua Kinard <kumba@gentoo.org> |
| * Brent Casavant <bcasavan@sgi.com> - IOC4 master driver |
| * Pat Gefre <pfg@sgi.com> - IOC3 serial port IRQ demuxer |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/errno.h> |
| #include <linux/interrupt.h> |
| #include <linux/mfd/core.h> |
| #include <linux/module.h> |
| #include <linux/pci.h> |
| #include <linux/platform_device.h> |
| #include <linux/platform_data/sgi-w1.h> |
| #include <linux/rtc/ds1685.h> |
| |
| #include <asm/pci/bridge.h> |
| #include <asm/sn/ioc3.h> |
| |
| #define IOC3_IRQ_SERIAL_A 6 |
| #define IOC3_IRQ_SERIAL_B 15 |
| #define IOC3_IRQ_KBD 22 |
| |
| /* Bitmask for selecting which IRQs are level triggered */ |
| #define IOC3_LVL_MASK (BIT(IOC3_IRQ_SERIAL_A) | BIT(IOC3_IRQ_SERIAL_B)) |
| |
| #define M48T35_REG_SIZE 32768 /* size of m48t35 registers */ |
| |
| /* 1.2 us latency timer (40 cycles at 33 MHz) */ |
| #define IOC3_LATENCY 40 |
| |
| struct ioc3_priv_data { |
| struct irq_domain *domain; |
| struct ioc3 __iomem *regs; |
| struct pci_dev *pdev; |
| int domain_irq; |
| }; |
| |
| static void ioc3_irq_ack(struct irq_data *d) |
| { |
| struct ioc3_priv_data *ipd = irq_data_get_irq_chip_data(d); |
| unsigned int hwirq = irqd_to_hwirq(d); |
| |
| writel(BIT(hwirq), &ipd->regs->sio_ir); |
| } |
| |
| static void ioc3_irq_mask(struct irq_data *d) |
| { |
| struct ioc3_priv_data *ipd = irq_data_get_irq_chip_data(d); |
| unsigned int hwirq = irqd_to_hwirq(d); |
| |
| writel(BIT(hwirq), &ipd->regs->sio_iec); |
| } |
| |
| static void ioc3_irq_unmask(struct irq_data *d) |
| { |
| struct ioc3_priv_data *ipd = irq_data_get_irq_chip_data(d); |
| unsigned int hwirq = irqd_to_hwirq(d); |
| |
| writel(BIT(hwirq), &ipd->regs->sio_ies); |
| } |
| |
| static struct irq_chip ioc3_irq_chip = { |
| .name = "IOC3", |
| .irq_ack = ioc3_irq_ack, |
| .irq_mask = ioc3_irq_mask, |
| .irq_unmask = ioc3_irq_unmask, |
| }; |
| |
| static int ioc3_irq_domain_map(struct irq_domain *d, unsigned int irq, |
| irq_hw_number_t hwirq) |
| { |
| /* Set level IRQs for every interrupt contained in IOC3_LVL_MASK */ |
| if (BIT(hwirq) & IOC3_LVL_MASK) |
| irq_set_chip_and_handler(irq, &ioc3_irq_chip, handle_level_irq); |
| else |
| irq_set_chip_and_handler(irq, &ioc3_irq_chip, handle_edge_irq); |
| |
| irq_set_chip_data(irq, d->host_data); |
| return 0; |
| } |
| |
| static void ioc3_irq_domain_unmap(struct irq_domain *d, unsigned int irq) |
| { |
| irq_set_chip_and_handler(irq, NULL, NULL); |
| irq_set_chip_data(irq, NULL); |
| } |
| |
| static const struct irq_domain_ops ioc3_irq_domain_ops = { |
| .map = ioc3_irq_domain_map, |
| .unmap = ioc3_irq_domain_unmap, |
| }; |
| |
| static void ioc3_irq_handler(struct irq_desc *desc) |
| { |
| struct irq_domain *domain = irq_desc_get_handler_data(desc); |
| struct ioc3_priv_data *ipd = domain->host_data; |
| struct ioc3 __iomem *regs = ipd->regs; |
| u32 pending, mask; |
| unsigned int irq; |
| |
| pending = readl(®s->sio_ir); |
| mask = readl(®s->sio_ies); |
| pending &= mask; /* Mask off not enabled interrupts */ |
| |
| if (pending) { |
| irq = irq_find_mapping(domain, __ffs(pending)); |
| if (irq) |
| generic_handle_irq(irq); |
| } else { |
| spurious_interrupt(); |
| } |
| } |
| |
| /* |
| * System boards/BaseIOs use more interrupt pins of the bridge ASIC |
| * to which the IOC3 is connected. Since the IOC3 MFD driver |
| * knows wiring of these extra pins, we use the map_irq function |
| * to get interrupts activated |
| */ |
| static int ioc3_map_irq(struct pci_dev *pdev, int slot, int pin) |
| { |
| struct pci_host_bridge *hbrg = pci_find_host_bridge(pdev->bus); |
| |
| return hbrg->map_irq(pdev, slot, pin); |
| } |
| |
| static int ioc3_irq_domain_setup(struct ioc3_priv_data *ipd, int irq) |
| { |
| struct irq_domain *domain; |
| struct fwnode_handle *fn; |
| |
| fn = irq_domain_alloc_named_fwnode("IOC3"); |
| if (!fn) |
| goto err; |
| |
| domain = irq_domain_create_linear(fn, 24, &ioc3_irq_domain_ops, ipd); |
| if (!domain) |
| goto err; |
| |
| irq_domain_free_fwnode(fn); |
| ipd->domain = domain; |
| |
| irq_set_chained_handler_and_data(irq, ioc3_irq_handler, domain); |
| ipd->domain_irq = irq; |
| return 0; |
| |
| err: |
| dev_err(&ipd->pdev->dev, "irq domain setup failed\n"); |
| return -ENOMEM; |
| } |
| |
| static struct resource ioc3_uarta_resources[] = { |
| DEFINE_RES_MEM(offsetof(struct ioc3, sregs.uarta), |
| sizeof_field(struct ioc3, sregs.uarta)), |
| DEFINE_RES_IRQ(IOC3_IRQ_SERIAL_A) |
| }; |
| |
| static struct resource ioc3_uartb_resources[] = { |
| DEFINE_RES_MEM(offsetof(struct ioc3, sregs.uartb), |
| sizeof_field(struct ioc3, sregs.uartb)), |
| DEFINE_RES_IRQ(IOC3_IRQ_SERIAL_B) |
| }; |
| |
| static struct mfd_cell ioc3_serial_cells[] = { |
| { |
| .name = "ioc3-serial8250", |
| .resources = ioc3_uarta_resources, |
| .num_resources = ARRAY_SIZE(ioc3_uarta_resources), |
| }, |
| { |
| .name = "ioc3-serial8250", |
| .resources = ioc3_uartb_resources, |
| .num_resources = ARRAY_SIZE(ioc3_uartb_resources), |
| } |
| }; |
| |
| static int ioc3_serial_setup(struct ioc3_priv_data *ipd) |
| { |
| int ret; |
| |
| /* Set gpio pins for RS232/RS422 mode selection */ |
| writel(GPCR_UARTA_MODESEL | GPCR_UARTB_MODESEL, |
| &ipd->regs->gpcr_s); |
| /* Select RS232 mode for uart a */ |
| writel(0, &ipd->regs->gppr[6]); |
| /* Select RS232 mode for uart b */ |
| writel(0, &ipd->regs->gppr[7]); |
| |
| /* Switch both ports to 16650 mode */ |
| writel(readl(&ipd->regs->port_a.sscr) & ~SSCR_DMA_EN, |
| &ipd->regs->port_a.sscr); |
| writel(readl(&ipd->regs->port_b.sscr) & ~SSCR_DMA_EN, |
| &ipd->regs->port_b.sscr); |
| udelay(1000); /* Wait until mode switch is done */ |
| |
| ret = mfd_add_devices(&ipd->pdev->dev, PLATFORM_DEVID_AUTO, |
| ioc3_serial_cells, ARRAY_SIZE(ioc3_serial_cells), |
| &ipd->pdev->resource[0], 0, ipd->domain); |
| if (ret) { |
| dev_err(&ipd->pdev->dev, "Failed to add 16550 subdevs\n"); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static struct resource ioc3_kbd_resources[] = { |
| DEFINE_RES_MEM(offsetof(struct ioc3, serio), |
| sizeof_field(struct ioc3, serio)), |
| DEFINE_RES_IRQ(IOC3_IRQ_KBD) |
| }; |
| |
| static struct mfd_cell ioc3_kbd_cells[] = { |
| { |
| .name = "ioc3-kbd", |
| .resources = ioc3_kbd_resources, |
| .num_resources = ARRAY_SIZE(ioc3_kbd_resources), |
| } |
| }; |
| |
| static int ioc3_kbd_setup(struct ioc3_priv_data *ipd) |
| { |
| int ret; |
| |
| ret = mfd_add_devices(&ipd->pdev->dev, PLATFORM_DEVID_AUTO, |
| ioc3_kbd_cells, ARRAY_SIZE(ioc3_kbd_cells), |
| &ipd->pdev->resource[0], 0, ipd->domain); |
| if (ret) { |
| dev_err(&ipd->pdev->dev, "Failed to add 16550 subdevs\n"); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static struct resource ioc3_eth_resources[] = { |
| DEFINE_RES_MEM(offsetof(struct ioc3, eth), |
| sizeof_field(struct ioc3, eth)), |
| DEFINE_RES_MEM(offsetof(struct ioc3, ssram), |
| sizeof_field(struct ioc3, ssram)), |
| DEFINE_RES_IRQ(0) |
| }; |
| |
| static struct resource ioc3_w1_resources[] = { |
| DEFINE_RES_MEM(offsetof(struct ioc3, mcr), |
| sizeof_field(struct ioc3, mcr)), |
| }; |
| static struct sgi_w1_platform_data ioc3_w1_platform_data; |
| |
| static struct mfd_cell ioc3_eth_cells[] = { |
| { |
| .name = "ioc3-eth", |
| .resources = ioc3_eth_resources, |
| .num_resources = ARRAY_SIZE(ioc3_eth_resources), |
| }, |
| { |
| .name = "sgi_w1", |
| .resources = ioc3_w1_resources, |
| .num_resources = ARRAY_SIZE(ioc3_w1_resources), |
| .platform_data = &ioc3_w1_platform_data, |
| .pdata_size = sizeof(ioc3_w1_platform_data), |
| } |
| }; |
| |
| static int ioc3_eth_setup(struct ioc3_priv_data *ipd) |
| { |
| int ret; |
| |
| /* Enable One-Wire bus */ |
| writel(GPCR_MLAN_EN, &ipd->regs->gpcr_s); |
| |
| /* Generate unique identifier */ |
| snprintf(ioc3_w1_platform_data.dev_id, |
| sizeof(ioc3_w1_platform_data.dev_id), "ioc3-%012llx", |
| ipd->pdev->resource->start); |
| |
| ret = mfd_add_devices(&ipd->pdev->dev, PLATFORM_DEVID_AUTO, |
| ioc3_eth_cells, ARRAY_SIZE(ioc3_eth_cells), |
| &ipd->pdev->resource[0], ipd->pdev->irq, NULL); |
| if (ret) { |
| dev_err(&ipd->pdev->dev, "Failed to add ETH/W1 subdev\n"); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static struct resource ioc3_m48t35_resources[] = { |
| DEFINE_RES_MEM(IOC3_BYTEBUS_DEV0, M48T35_REG_SIZE) |
| }; |
| |
| static struct mfd_cell ioc3_m48t35_cells[] = { |
| { |
| .name = "rtc-m48t35", |
| .resources = ioc3_m48t35_resources, |
| .num_resources = ARRAY_SIZE(ioc3_m48t35_resources), |
| } |
| }; |
| |
| static int ioc3_m48t35_setup(struct ioc3_priv_data *ipd) |
| { |
| int ret; |
| |
| ret = mfd_add_devices(&ipd->pdev->dev, PLATFORM_DEVID_AUTO, |
| ioc3_m48t35_cells, ARRAY_SIZE(ioc3_m48t35_cells), |
| &ipd->pdev->resource[0], 0, ipd->domain); |
| if (ret) |
| dev_err(&ipd->pdev->dev, "Failed to add M48T35 subdev\n"); |
| |
| return ret; |
| } |
| |
| static struct ds1685_rtc_platform_data ip30_rtc_platform_data = { |
| .bcd_mode = false, |
| .no_irq = false, |
| .uie_unsupported = true, |
| .access_type = ds1685_reg_indirect, |
| }; |
| |
| static struct resource ioc3_rtc_ds1685_resources[] = { |
| DEFINE_RES_MEM(IOC3_BYTEBUS_DEV1, 1), |
| DEFINE_RES_MEM(IOC3_BYTEBUS_DEV2, 1), |
| DEFINE_RES_IRQ(0) |
| }; |
| |
| static struct mfd_cell ioc3_ds1685_cells[] = { |
| { |
| .name = "rtc-ds1685", |
| .resources = ioc3_rtc_ds1685_resources, |
| .num_resources = ARRAY_SIZE(ioc3_rtc_ds1685_resources), |
| .platform_data = &ip30_rtc_platform_data, |
| .pdata_size = sizeof(ip30_rtc_platform_data), |
| .id = PLATFORM_DEVID_NONE, |
| } |
| }; |
| |
| static int ioc3_ds1685_setup(struct ioc3_priv_data *ipd) |
| { |
| int ret, irq; |
| |
| irq = ioc3_map_irq(ipd->pdev, 6, 0); |
| |
| ret = mfd_add_devices(&ipd->pdev->dev, 0, ioc3_ds1685_cells, |
| ARRAY_SIZE(ioc3_ds1685_cells), |
| &ipd->pdev->resource[0], irq, NULL); |
| if (ret) |
| dev_err(&ipd->pdev->dev, "Failed to add DS1685 subdev\n"); |
| |
| return ret; |
| }; |
| |
| |
| static struct resource ioc3_leds_resources[] = { |
| DEFINE_RES_MEM(offsetof(struct ioc3, gppr[0]), |
| sizeof_field(struct ioc3, gppr[0])), |
| DEFINE_RES_MEM(offsetof(struct ioc3, gppr[1]), |
| sizeof_field(struct ioc3, gppr[1])), |
| }; |
| |
| static struct mfd_cell ioc3_led_cells[] = { |
| { |
| .name = "ip30-leds", |
| .resources = ioc3_leds_resources, |
| .num_resources = ARRAY_SIZE(ioc3_leds_resources), |
| .id = PLATFORM_DEVID_NONE, |
| } |
| }; |
| |
| static int ioc3_led_setup(struct ioc3_priv_data *ipd) |
| { |
| int ret; |
| |
| ret = mfd_add_devices(&ipd->pdev->dev, 0, ioc3_led_cells, |
| ARRAY_SIZE(ioc3_led_cells), |
| &ipd->pdev->resource[0], 0, ipd->domain); |
| if (ret) |
| dev_err(&ipd->pdev->dev, "Failed to add LED subdev\n"); |
| |
| return ret; |
| } |
| |
| static int ip27_baseio_setup(struct ioc3_priv_data *ipd) |
| { |
| int ret, io_irq; |
| |
| io_irq = ioc3_map_irq(ipd->pdev, PCI_SLOT(ipd->pdev->devfn), |
| PCI_INTERRUPT_INTB); |
| ret = ioc3_irq_domain_setup(ipd, io_irq); |
| if (ret) |
| return ret; |
| |
| ret = ioc3_eth_setup(ipd); |
| if (ret) |
| return ret; |
| |
| ret = ioc3_serial_setup(ipd); |
| if (ret) |
| return ret; |
| |
| return ioc3_m48t35_setup(ipd); |
| } |
| |
| static int ip27_baseio6g_setup(struct ioc3_priv_data *ipd) |
| { |
| int ret, io_irq; |
| |
| io_irq = ioc3_map_irq(ipd->pdev, PCI_SLOT(ipd->pdev->devfn), |
| PCI_INTERRUPT_INTB); |
| ret = ioc3_irq_domain_setup(ipd, io_irq); |
| if (ret) |
| return ret; |
| |
| ret = ioc3_eth_setup(ipd); |
| if (ret) |
| return ret; |
| |
| ret = ioc3_serial_setup(ipd); |
| if (ret) |
| return ret; |
| |
| ret = ioc3_m48t35_setup(ipd); |
| if (ret) |
| return ret; |
| |
| return ioc3_kbd_setup(ipd); |
| } |
| |
| static int ip27_mio_setup(struct ioc3_priv_data *ipd) |
| { |
| int ret; |
| |
| ret = ioc3_irq_domain_setup(ipd, ipd->pdev->irq); |
| if (ret) |
| return ret; |
| |
| ret = ioc3_serial_setup(ipd); |
| if (ret) |
| return ret; |
| |
| return ioc3_kbd_setup(ipd); |
| } |
| |
| static int ip30_sysboard_setup(struct ioc3_priv_data *ipd) |
| { |
| int ret, io_irq; |
| |
| io_irq = ioc3_map_irq(ipd->pdev, PCI_SLOT(ipd->pdev->devfn), |
| PCI_INTERRUPT_INTB); |
| ret = ioc3_irq_domain_setup(ipd, io_irq); |
| if (ret) |
| return ret; |
| |
| ret = ioc3_eth_setup(ipd); |
| if (ret) |
| return ret; |
| |
| ret = ioc3_serial_setup(ipd); |
| if (ret) |
| return ret; |
| |
| ret = ioc3_kbd_setup(ipd); |
| if (ret) |
| return ret; |
| |
| ret = ioc3_ds1685_setup(ipd); |
| if (ret) |
| return ret; |
| |
| return ioc3_led_setup(ipd); |
| } |
| |
| static int ioc3_menet_setup(struct ioc3_priv_data *ipd) |
| { |
| int ret, io_irq; |
| |
| io_irq = ioc3_map_irq(ipd->pdev, PCI_SLOT(ipd->pdev->devfn), |
| PCI_INTERRUPT_INTB); |
| ret = ioc3_irq_domain_setup(ipd, io_irq); |
| if (ret) |
| return ret; |
| |
| ret = ioc3_eth_setup(ipd); |
| if (ret) |
| return ret; |
| |
| return ioc3_serial_setup(ipd); |
| } |
| |
| static int ioc3_menet4_setup(struct ioc3_priv_data *ipd) |
| { |
| return ioc3_eth_setup(ipd); |
| } |
| |
| static int ioc3_cad_duo_setup(struct ioc3_priv_data *ipd) |
| { |
| int ret, io_irq; |
| |
| io_irq = ioc3_map_irq(ipd->pdev, PCI_SLOT(ipd->pdev->devfn), |
| PCI_INTERRUPT_INTB); |
| ret = ioc3_irq_domain_setup(ipd, io_irq); |
| if (ret) |
| return ret; |
| |
| ret = ioc3_eth_setup(ipd); |
| if (ret) |
| return ret; |
| |
| return ioc3_kbd_setup(ipd); |
| } |
| |
| /* Helper macro for filling ioc3_info array */ |
| #define IOC3_SID(_name, _sid, _setup) \ |
| { \ |
| .name = _name, \ |
| .sid = PCI_VENDOR_ID_SGI | (IOC3_SUBSYS_ ## _sid << 16), \ |
| .setup = _setup, \ |
| } |
| |
| static struct { |
| const char *name; |
| u32 sid; |
| int (*setup)(struct ioc3_priv_data *ipd); |
| } ioc3_infos[] = { |
| IOC3_SID("IP27 BaseIO6G", IP27_BASEIO6G, &ip27_baseio6g_setup), |
| IOC3_SID("IP27 MIO", IP27_MIO, &ip27_mio_setup), |
| IOC3_SID("IP27 BaseIO", IP27_BASEIO, &ip27_baseio_setup), |
| IOC3_SID("IP29 System Board", IP29_SYSBOARD, &ip27_baseio6g_setup), |
| IOC3_SID("IP30 System Board", IP30_SYSBOARD, &ip30_sysboard_setup), |
| IOC3_SID("MENET", MENET, &ioc3_menet_setup), |
| IOC3_SID("MENET4", MENET4, &ioc3_menet4_setup) |
| }; |
| #undef IOC3_SID |
| |
| static int ioc3_setup(struct ioc3_priv_data *ipd) |
| { |
| u32 sid; |
| int i; |
| |
| /* Clear IRQs */ |
| writel(~0, &ipd->regs->sio_iec); |
| writel(~0, &ipd->regs->sio_ir); |
| writel(0, &ipd->regs->eth.eier); |
| writel(~0, &ipd->regs->eth.eisr); |
| |
| /* Read subsystem vendor id and subsystem id */ |
| pci_read_config_dword(ipd->pdev, PCI_SUBSYSTEM_VENDOR_ID, &sid); |
| |
| for (i = 0; i < ARRAY_SIZE(ioc3_infos); i++) |
| if (sid == ioc3_infos[i].sid) { |
| pr_info("ioc3: %s\n", ioc3_infos[i].name); |
| return ioc3_infos[i].setup(ipd); |
| } |
| |
| /* Treat everything not identified by PCI subid as CAD DUO */ |
| pr_info("ioc3: CAD DUO\n"); |
| return ioc3_cad_duo_setup(ipd); |
| } |
| |
| static int ioc3_mfd_probe(struct pci_dev *pdev, |
| const struct pci_device_id *pci_id) |
| { |
| struct ioc3_priv_data *ipd; |
| struct ioc3 __iomem *regs; |
| int ret; |
| |
| ret = pci_enable_device(pdev); |
| if (ret) |
| return ret; |
| |
| pci_write_config_byte(pdev, PCI_LATENCY_TIMER, IOC3_LATENCY); |
| pci_set_master(pdev); |
| |
| ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64)); |
| if (ret) { |
| pr_err("%s: No usable DMA configuration, aborting.\n", |
| pci_name(pdev)); |
| goto out_disable_device; |
| } |
| |
| /* Set up per-IOC3 data */ |
| ipd = devm_kzalloc(&pdev->dev, sizeof(struct ioc3_priv_data), |
| GFP_KERNEL); |
| if (!ipd) { |
| ret = -ENOMEM; |
| goto out_disable_device; |
| } |
| ipd->pdev = pdev; |
| |
| /* |
| * Map all IOC3 registers. These are shared between subdevices |
| * so the main IOC3 module manages them. |
| */ |
| regs = pci_ioremap_bar(pdev, 0); |
| if (!regs) { |
| dev_warn(&pdev->dev, "ioc3: Unable to remap PCI BAR for %s.\n", |
| pci_name(pdev)); |
| ret = -ENOMEM; |
| goto out_disable_device; |
| } |
| ipd->regs = regs; |
| |
| /* Track PCI-device specific data */ |
| pci_set_drvdata(pdev, ipd); |
| |
| ret = ioc3_setup(ipd); |
| if (ret) { |
| /* Remove all already added MFD devices */ |
| mfd_remove_devices(&ipd->pdev->dev); |
| if (ipd->domain) { |
| irq_domain_remove(ipd->domain); |
| free_irq(ipd->domain_irq, (void *)ipd); |
| } |
| pci_iounmap(pdev, regs); |
| goto out_disable_device; |
| } |
| |
| return 0; |
| |
| out_disable_device: |
| pci_disable_device(pdev); |
| return ret; |
| } |
| |
| static void ioc3_mfd_remove(struct pci_dev *pdev) |
| { |
| struct ioc3_priv_data *ipd; |
| |
| ipd = pci_get_drvdata(pdev); |
| |
| /* Clear and disable all IRQs */ |
| writel(~0, &ipd->regs->sio_iec); |
| writel(~0, &ipd->regs->sio_ir); |
| |
| /* Release resources */ |
| mfd_remove_devices(&ipd->pdev->dev); |
| if (ipd->domain) { |
| irq_domain_remove(ipd->domain); |
| free_irq(ipd->domain_irq, (void *)ipd); |
| } |
| pci_iounmap(pdev, ipd->regs); |
| pci_disable_device(pdev); |
| } |
| |
| static struct pci_device_id ioc3_mfd_id_table[] = { |
| { PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3, PCI_ANY_ID, PCI_ANY_ID }, |
| { 0, }, |
| }; |
| MODULE_DEVICE_TABLE(pci, ioc3_mfd_id_table); |
| |
| static struct pci_driver ioc3_mfd_driver = { |
| .name = "IOC3", |
| .id_table = ioc3_mfd_id_table, |
| .probe = ioc3_mfd_probe, |
| .remove = ioc3_mfd_remove, |
| }; |
| |
| module_pci_driver(ioc3_mfd_driver); |
| |
| MODULE_AUTHOR("Thomas Bogendoerfer <tbogendoerfer@suse.de>"); |
| MODULE_DESCRIPTION("SGI IOC3 MFD driver"); |
| MODULE_LICENSE("GPL v2"); |