| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Simple driver for Texas Instruments LM3630A Backlight driver chip |
| * Copyright (C) 2012 Texas Instruments |
| */ |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/i2c.h> |
| #include <linux/backlight.h> |
| #include <linux/err.h> |
| #include <linux/delay.h> |
| #include <linux/uaccess.h> |
| #include <linux/interrupt.h> |
| #include <linux/regmap.h> |
| #include <linux/gpio/consumer.h> |
| #include <linux/pwm.h> |
| #include <linux/platform_data/lm3630a_bl.h> |
| |
| #define REG_CTRL 0x00 |
| #define REG_BOOST 0x02 |
| #define REG_CONFIG 0x01 |
| #define REG_BRT_A 0x03 |
| #define REG_BRT_B 0x04 |
| #define REG_I_A 0x05 |
| #define REG_I_B 0x06 |
| #define REG_INT_STATUS 0x09 |
| #define REG_INT_EN 0x0A |
| #define REG_FAULT 0x0B |
| #define REG_PWM_OUTLOW 0x12 |
| #define REG_PWM_OUTHIGH 0x13 |
| #define REG_FILTER_STRENGTH 0x50 |
| #define REG_MAX 0x50 |
| |
| #define INT_DEBOUNCE_MSEC 10 |
| |
| #define LM3630A_BANK_0 0 |
| #define LM3630A_BANK_1 1 |
| |
| #define LM3630A_NUM_SINKS 2 |
| #define LM3630A_SINK_0 0 |
| #define LM3630A_SINK_1 1 |
| |
| struct lm3630a_chip { |
| struct device *dev; |
| struct delayed_work work; |
| |
| int irq; |
| struct workqueue_struct *irqthread; |
| struct lm3630a_platform_data *pdata; |
| struct backlight_device *bleda; |
| struct backlight_device *bledb; |
| struct gpio_desc *enable_gpio; |
| struct regmap *regmap; |
| struct pwm_device *pwmd; |
| struct pwm_state pwmd_state; |
| }; |
| |
| /* i2c access */ |
| static int lm3630a_read(struct lm3630a_chip *pchip, unsigned int reg) |
| { |
| int rval; |
| unsigned int reg_val; |
| |
| rval = regmap_read(pchip->regmap, reg, ®_val); |
| if (rval < 0) |
| return rval; |
| return reg_val & 0xFF; |
| } |
| |
| static int lm3630a_write(struct lm3630a_chip *pchip, |
| unsigned int reg, unsigned int data) |
| { |
| return regmap_write(pchip->regmap, reg, data); |
| } |
| |
| static int lm3630a_update(struct lm3630a_chip *pchip, |
| unsigned int reg, unsigned int mask, |
| unsigned int data) |
| { |
| return regmap_update_bits(pchip->regmap, reg, mask, data); |
| } |
| |
| /* initialize chip */ |
| static int lm3630a_chip_init(struct lm3630a_chip *pchip) |
| { |
| int rval; |
| struct lm3630a_platform_data *pdata = pchip->pdata; |
| |
| usleep_range(1000, 2000); |
| /* set Filter Strength Register */ |
| rval = lm3630a_write(pchip, REG_FILTER_STRENGTH, 0x03); |
| /* set Cofig. register */ |
| rval |= lm3630a_update(pchip, REG_CONFIG, 0x07, pdata->pwm_ctrl); |
| /* set boost control */ |
| rval |= lm3630a_write(pchip, REG_BOOST, 0x38); |
| /* set current A */ |
| rval |= lm3630a_update(pchip, REG_I_A, 0x1F, 0x1F); |
| /* set current B */ |
| rval |= lm3630a_write(pchip, REG_I_B, 0x1F); |
| /* set control */ |
| rval |= lm3630a_update(pchip, REG_CTRL, 0x14, pdata->leda_ctrl); |
| rval |= lm3630a_update(pchip, REG_CTRL, 0x0B, pdata->ledb_ctrl); |
| usleep_range(1000, 2000); |
| /* set brightness A and B */ |
| rval |= lm3630a_write(pchip, REG_BRT_A, pdata->leda_init_brt); |
| rval |= lm3630a_write(pchip, REG_BRT_B, pdata->ledb_init_brt); |
| |
| if (rval < 0) |
| dev_err(pchip->dev, "i2c failed to access register\n"); |
| return rval; |
| } |
| |
| /* interrupt handling */ |
| static void lm3630a_delayed_func(struct work_struct *work) |
| { |
| int rval; |
| struct lm3630a_chip *pchip; |
| |
| pchip = container_of(work, struct lm3630a_chip, work.work); |
| |
| rval = lm3630a_read(pchip, REG_INT_STATUS); |
| if (rval < 0) { |
| dev_err(pchip->dev, |
| "i2c failed to access REG_INT_STATUS Register\n"); |
| return; |
| } |
| |
| dev_info(pchip->dev, "REG_INT_STATUS Register is 0x%x\n", rval); |
| } |
| |
| static irqreturn_t lm3630a_isr_func(int irq, void *chip) |
| { |
| int rval; |
| struct lm3630a_chip *pchip = chip; |
| unsigned long delay = msecs_to_jiffies(INT_DEBOUNCE_MSEC); |
| |
| queue_delayed_work(pchip->irqthread, &pchip->work, delay); |
| |
| rval = lm3630a_update(pchip, REG_CTRL, 0x80, 0x00); |
| if (rval < 0) { |
| dev_err(pchip->dev, "i2c failed to access register\n"); |
| return IRQ_NONE; |
| } |
| return IRQ_HANDLED; |
| } |
| |
| static int lm3630a_intr_config(struct lm3630a_chip *pchip) |
| { |
| int rval; |
| |
| rval = lm3630a_write(pchip, REG_INT_EN, 0x87); |
| if (rval < 0) |
| return rval; |
| |
| INIT_DELAYED_WORK(&pchip->work, lm3630a_delayed_func); |
| pchip->irqthread = create_singlethread_workqueue("lm3630a-irqthd"); |
| if (!pchip->irqthread) { |
| dev_err(pchip->dev, "create irq thread fail\n"); |
| return -ENOMEM; |
| } |
| if (request_threaded_irq |
| (pchip->irq, NULL, lm3630a_isr_func, |
| IRQF_TRIGGER_FALLING | IRQF_ONESHOT, "lm3630a_irq", pchip)) { |
| dev_err(pchip->dev, "request threaded irq fail\n"); |
| destroy_workqueue(pchip->irqthread); |
| return -ENOMEM; |
| } |
| return rval; |
| } |
| |
| static int lm3630a_pwm_ctrl(struct lm3630a_chip *pchip, int br, int br_max) |
| { |
| int err; |
| |
| pchip->pwmd_state.period = pchip->pdata->pwm_period; |
| |
| err = pwm_set_relative_duty_cycle(&pchip->pwmd_state, br, br_max); |
| if (err) |
| return err; |
| |
| pchip->pwmd_state.enabled = pchip->pwmd_state.duty_cycle ? true : false; |
| |
| return pwm_apply_state(pchip->pwmd, &pchip->pwmd_state); |
| } |
| |
| /* update and get brightness */ |
| static int lm3630a_bank_a_update_status(struct backlight_device *bl) |
| { |
| int ret; |
| struct lm3630a_chip *pchip = bl_get_data(bl); |
| enum lm3630a_pwm_ctrl pwm_ctrl = pchip->pdata->pwm_ctrl; |
| |
| /* pwm control */ |
| if ((pwm_ctrl & LM3630A_PWM_BANK_A) != 0) |
| return lm3630a_pwm_ctrl(pchip, bl->props.brightness, |
| bl->props.max_brightness); |
| |
| /* disable sleep */ |
| ret = lm3630a_update(pchip, REG_CTRL, 0x80, 0x00); |
| if (ret < 0) |
| goto out_i2c_err; |
| usleep_range(1000, 2000); |
| /* minimum brightness is 0x04 */ |
| ret = lm3630a_write(pchip, REG_BRT_A, bl->props.brightness); |
| if (bl->props.brightness < 0x4) |
| ret |= lm3630a_update(pchip, REG_CTRL, LM3630A_LEDA_ENABLE, 0); |
| else |
| ret |= lm3630a_update(pchip, REG_CTRL, |
| LM3630A_LEDA_ENABLE, LM3630A_LEDA_ENABLE); |
| if (ret < 0) |
| goto out_i2c_err; |
| return 0; |
| |
| out_i2c_err: |
| dev_err(pchip->dev, "i2c failed to access (%pe)\n", ERR_PTR(ret)); |
| return ret; |
| } |
| |
| static int lm3630a_bank_a_get_brightness(struct backlight_device *bl) |
| { |
| int brightness, rval; |
| struct lm3630a_chip *pchip = bl_get_data(bl); |
| enum lm3630a_pwm_ctrl pwm_ctrl = pchip->pdata->pwm_ctrl; |
| |
| if ((pwm_ctrl & LM3630A_PWM_BANK_A) != 0) { |
| rval = lm3630a_read(pchip, REG_PWM_OUTHIGH); |
| if (rval < 0) |
| goto out_i2c_err; |
| brightness = (rval & 0x01) << 8; |
| rval = lm3630a_read(pchip, REG_PWM_OUTLOW); |
| if (rval < 0) |
| goto out_i2c_err; |
| brightness |= rval; |
| goto out; |
| } |
| |
| /* disable sleep */ |
| rval = lm3630a_update(pchip, REG_CTRL, 0x80, 0x00); |
| if (rval < 0) |
| goto out_i2c_err; |
| usleep_range(1000, 2000); |
| rval = lm3630a_read(pchip, REG_BRT_A); |
| if (rval < 0) |
| goto out_i2c_err; |
| brightness = rval; |
| |
| out: |
| bl->props.brightness = brightness; |
| return bl->props.brightness; |
| out_i2c_err: |
| dev_err(pchip->dev, "i2c failed to access register\n"); |
| return 0; |
| } |
| |
| static const struct backlight_ops lm3630a_bank_a_ops = { |
| .options = BL_CORE_SUSPENDRESUME, |
| .update_status = lm3630a_bank_a_update_status, |
| .get_brightness = lm3630a_bank_a_get_brightness, |
| }; |
| |
| /* update and get brightness */ |
| static int lm3630a_bank_b_update_status(struct backlight_device *bl) |
| { |
| int ret; |
| struct lm3630a_chip *pchip = bl_get_data(bl); |
| enum lm3630a_pwm_ctrl pwm_ctrl = pchip->pdata->pwm_ctrl; |
| |
| /* pwm control */ |
| if ((pwm_ctrl & LM3630A_PWM_BANK_B) != 0) |
| return lm3630a_pwm_ctrl(pchip, bl->props.brightness, |
| bl->props.max_brightness); |
| |
| /* disable sleep */ |
| ret = lm3630a_update(pchip, REG_CTRL, 0x80, 0x00); |
| if (ret < 0) |
| goto out_i2c_err; |
| usleep_range(1000, 2000); |
| /* minimum brightness is 0x04 */ |
| ret = lm3630a_write(pchip, REG_BRT_B, bl->props.brightness); |
| if (bl->props.brightness < 0x4) |
| ret |= lm3630a_update(pchip, REG_CTRL, LM3630A_LEDB_ENABLE, 0); |
| else |
| ret |= lm3630a_update(pchip, REG_CTRL, |
| LM3630A_LEDB_ENABLE, LM3630A_LEDB_ENABLE); |
| if (ret < 0) |
| goto out_i2c_err; |
| return 0; |
| |
| out_i2c_err: |
| dev_err(pchip->dev, "i2c failed to access (%pe)\n", ERR_PTR(ret)); |
| return ret; |
| } |
| |
| static int lm3630a_bank_b_get_brightness(struct backlight_device *bl) |
| { |
| int brightness, rval; |
| struct lm3630a_chip *pchip = bl_get_data(bl); |
| enum lm3630a_pwm_ctrl pwm_ctrl = pchip->pdata->pwm_ctrl; |
| |
| if ((pwm_ctrl & LM3630A_PWM_BANK_B) != 0) { |
| rval = lm3630a_read(pchip, REG_PWM_OUTHIGH); |
| if (rval < 0) |
| goto out_i2c_err; |
| brightness = (rval & 0x01) << 8; |
| rval = lm3630a_read(pchip, REG_PWM_OUTLOW); |
| if (rval < 0) |
| goto out_i2c_err; |
| brightness |= rval; |
| goto out; |
| } |
| |
| /* disable sleep */ |
| rval = lm3630a_update(pchip, REG_CTRL, 0x80, 0x00); |
| if (rval < 0) |
| goto out_i2c_err; |
| usleep_range(1000, 2000); |
| rval = lm3630a_read(pchip, REG_BRT_B); |
| if (rval < 0) |
| goto out_i2c_err; |
| brightness = rval; |
| |
| out: |
| bl->props.brightness = brightness; |
| return bl->props.brightness; |
| out_i2c_err: |
| dev_err(pchip->dev, "i2c failed to access register\n"); |
| return 0; |
| } |
| |
| static const struct backlight_ops lm3630a_bank_b_ops = { |
| .options = BL_CORE_SUSPENDRESUME, |
| .update_status = lm3630a_bank_b_update_status, |
| .get_brightness = lm3630a_bank_b_get_brightness, |
| }; |
| |
| static int lm3630a_backlight_register(struct lm3630a_chip *pchip) |
| { |
| struct lm3630a_platform_data *pdata = pchip->pdata; |
| struct backlight_properties props; |
| const char *label; |
| |
| props.type = BACKLIGHT_RAW; |
| if (pdata->leda_ctrl != LM3630A_LEDA_DISABLE) { |
| props.brightness = pdata->leda_init_brt; |
| props.max_brightness = pdata->leda_max_brt; |
| label = pdata->leda_label ? pdata->leda_label : "lm3630a_leda"; |
| pchip->bleda = |
| devm_backlight_device_register(pchip->dev, label, |
| pchip->dev, pchip, |
| &lm3630a_bank_a_ops, &props); |
| if (IS_ERR(pchip->bleda)) |
| return PTR_ERR(pchip->bleda); |
| } |
| |
| if ((pdata->ledb_ctrl != LM3630A_LEDB_DISABLE) && |
| (pdata->ledb_ctrl != LM3630A_LEDB_ON_A)) { |
| props.brightness = pdata->ledb_init_brt; |
| props.max_brightness = pdata->ledb_max_brt; |
| label = pdata->ledb_label ? pdata->ledb_label : "lm3630a_ledb"; |
| pchip->bledb = |
| devm_backlight_device_register(pchip->dev, label, |
| pchip->dev, pchip, |
| &lm3630a_bank_b_ops, &props); |
| if (IS_ERR(pchip->bledb)) |
| return PTR_ERR(pchip->bledb); |
| } |
| return 0; |
| } |
| |
| static const struct regmap_config lm3630a_regmap = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| .max_register = REG_MAX, |
| }; |
| |
| static int lm3630a_parse_led_sources(struct fwnode_handle *node, |
| int default_led_sources) |
| { |
| u32 sources[LM3630A_NUM_SINKS]; |
| int ret, num_sources, i; |
| |
| num_sources = fwnode_property_count_u32(node, "led-sources"); |
| if (num_sources < 0) |
| return default_led_sources; |
| else if (num_sources > ARRAY_SIZE(sources)) |
| return -EINVAL; |
| |
| ret = fwnode_property_read_u32_array(node, "led-sources", sources, |
| num_sources); |
| if (ret) |
| return ret; |
| |
| for (i = 0; i < num_sources; i++) { |
| if (sources[i] != LM3630A_SINK_0 && sources[i] != LM3630A_SINK_1) |
| return -EINVAL; |
| |
| ret |= BIT(sources[i]); |
| } |
| |
| return ret; |
| } |
| |
| static int lm3630a_parse_bank(struct lm3630a_platform_data *pdata, |
| struct fwnode_handle *node, int *seen_led_sources) |
| { |
| int led_sources, ret; |
| const char *label; |
| u32 bank, val; |
| bool linear; |
| |
| ret = fwnode_property_read_u32(node, "reg", &bank); |
| if (ret) |
| return ret; |
| |
| if (bank != LM3630A_BANK_0 && bank != LM3630A_BANK_1) |
| return -EINVAL; |
| |
| led_sources = lm3630a_parse_led_sources(node, BIT(bank)); |
| if (led_sources < 0) |
| return led_sources; |
| |
| if (*seen_led_sources & led_sources) |
| return -EINVAL; |
| |
| *seen_led_sources |= led_sources; |
| |
| linear = fwnode_property_read_bool(node, |
| "ti,linear-mapping-mode"); |
| if (bank) { |
| if (led_sources & BIT(LM3630A_SINK_0) || |
| !(led_sources & BIT(LM3630A_SINK_1))) |
| return -EINVAL; |
| |
| pdata->ledb_ctrl = linear ? |
| LM3630A_LEDB_ENABLE_LINEAR : |
| LM3630A_LEDB_ENABLE; |
| } else { |
| if (!(led_sources & BIT(LM3630A_SINK_0))) |
| return -EINVAL; |
| |
| pdata->leda_ctrl = linear ? |
| LM3630A_LEDA_ENABLE_LINEAR : |
| LM3630A_LEDA_ENABLE; |
| |
| if (led_sources & BIT(LM3630A_SINK_1)) |
| pdata->ledb_ctrl = LM3630A_LEDB_ON_A; |
| } |
| |
| ret = fwnode_property_read_string(node, "label", &label); |
| if (!ret) { |
| if (bank) |
| pdata->ledb_label = label; |
| else |
| pdata->leda_label = label; |
| } |
| |
| ret = fwnode_property_read_u32(node, "default-brightness", |
| &val); |
| if (!ret) { |
| if (bank) |
| pdata->ledb_init_brt = val; |
| else |
| pdata->leda_init_brt = val; |
| } |
| |
| ret = fwnode_property_read_u32(node, "max-brightness", &val); |
| if (!ret) { |
| if (bank) |
| pdata->ledb_max_brt = val; |
| else |
| pdata->leda_max_brt = val; |
| } |
| |
| return 0; |
| } |
| |
| static int lm3630a_parse_node(struct lm3630a_chip *pchip, |
| struct lm3630a_platform_data *pdata) |
| { |
| int ret = -ENODEV, seen_led_sources = 0; |
| struct fwnode_handle *node; |
| |
| device_for_each_child_node(pchip->dev, node) { |
| ret = lm3630a_parse_bank(pdata, node, &seen_led_sources); |
| if (ret) { |
| fwnode_handle_put(node); |
| return ret; |
| } |
| } |
| |
| return ret; |
| } |
| |
| static int lm3630a_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| struct lm3630a_platform_data *pdata = dev_get_platdata(&client->dev); |
| struct lm3630a_chip *pchip; |
| int rval; |
| |
| if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { |
| dev_err(&client->dev, "fail : i2c functionality check\n"); |
| return -EOPNOTSUPP; |
| } |
| |
| pchip = devm_kzalloc(&client->dev, sizeof(struct lm3630a_chip), |
| GFP_KERNEL); |
| if (!pchip) |
| return -ENOMEM; |
| pchip->dev = &client->dev; |
| |
| pchip->regmap = devm_regmap_init_i2c(client, &lm3630a_regmap); |
| if (IS_ERR(pchip->regmap)) { |
| rval = PTR_ERR(pchip->regmap); |
| dev_err(&client->dev, "fail : allocate reg. map: %d\n", rval); |
| return rval; |
| } |
| |
| i2c_set_clientdata(client, pchip); |
| if (pdata == NULL) { |
| pdata = devm_kzalloc(pchip->dev, |
| sizeof(struct lm3630a_platform_data), |
| GFP_KERNEL); |
| if (pdata == NULL) |
| return -ENOMEM; |
| |
| /* default values */ |
| pdata->leda_max_brt = LM3630A_MAX_BRIGHTNESS; |
| pdata->ledb_max_brt = LM3630A_MAX_BRIGHTNESS; |
| pdata->leda_init_brt = LM3630A_MAX_BRIGHTNESS; |
| pdata->ledb_init_brt = LM3630A_MAX_BRIGHTNESS; |
| |
| rval = lm3630a_parse_node(pchip, pdata); |
| if (rval) { |
| dev_err(&client->dev, "fail : parse node\n"); |
| return rval; |
| } |
| } |
| pchip->pdata = pdata; |
| |
| pchip->enable_gpio = devm_gpiod_get_optional(&client->dev, "enable", |
| GPIOD_OUT_HIGH); |
| if (IS_ERR(pchip->enable_gpio)) { |
| rval = PTR_ERR(pchip->enable_gpio); |
| return rval; |
| } |
| |
| /* chip initialize */ |
| rval = lm3630a_chip_init(pchip); |
| if (rval < 0) { |
| dev_err(&client->dev, "fail : init chip\n"); |
| return rval; |
| } |
| /* backlight register */ |
| rval = lm3630a_backlight_register(pchip); |
| if (rval < 0) { |
| dev_err(&client->dev, "fail : backlight register.\n"); |
| return rval; |
| } |
| /* pwm */ |
| if (pdata->pwm_ctrl != LM3630A_PWM_DISABLE) { |
| pchip->pwmd = devm_pwm_get(pchip->dev, "lm3630a-pwm"); |
| if (IS_ERR(pchip->pwmd)) { |
| dev_err(&client->dev, "fail : get pwm device\n"); |
| return PTR_ERR(pchip->pwmd); |
| } |
| |
| pwm_init_state(pchip->pwmd, &pchip->pwmd_state); |
| } |
| |
| /* interrupt enable : irq 0 is not allowed */ |
| pchip->irq = client->irq; |
| if (pchip->irq) { |
| rval = lm3630a_intr_config(pchip); |
| if (rval < 0) |
| return rval; |
| } |
| dev_info(&client->dev, "LM3630A backlight register OK.\n"); |
| return 0; |
| } |
| |
| static int lm3630a_remove(struct i2c_client *client) |
| { |
| int rval; |
| struct lm3630a_chip *pchip = i2c_get_clientdata(client); |
| |
| rval = lm3630a_write(pchip, REG_BRT_A, 0); |
| if (rval < 0) |
| dev_err(pchip->dev, "i2c failed to access register\n"); |
| |
| rval = lm3630a_write(pchip, REG_BRT_B, 0); |
| if (rval < 0) |
| dev_err(pchip->dev, "i2c failed to access register\n"); |
| |
| if (pchip->irq) { |
| free_irq(pchip->irq, pchip); |
| flush_workqueue(pchip->irqthread); |
| destroy_workqueue(pchip->irqthread); |
| } |
| return 0; |
| } |
| |
| static const struct i2c_device_id lm3630a_id[] = { |
| {LM3630A_NAME, 0}, |
| {} |
| }; |
| |
| MODULE_DEVICE_TABLE(i2c, lm3630a_id); |
| |
| static const struct of_device_id lm3630a_match_table[] = { |
| { .compatible = "ti,lm3630a", }, |
| { }, |
| }; |
| |
| MODULE_DEVICE_TABLE(of, lm3630a_match_table); |
| |
| static struct i2c_driver lm3630a_i2c_driver = { |
| .driver = { |
| .name = LM3630A_NAME, |
| .of_match_table = lm3630a_match_table, |
| }, |
| .probe = lm3630a_probe, |
| .remove = lm3630a_remove, |
| .id_table = lm3630a_id, |
| }; |
| |
| module_i2c_driver(lm3630a_i2c_driver); |
| |
| MODULE_DESCRIPTION("Texas Instruments Backlight driver for LM3630A"); |
| MODULE_AUTHOR("Daniel Jeong <gshark.jeong@gmail.com>"); |
| MODULE_AUTHOR("LDD MLP <ldd-mlp@list.ti.com>"); |
| MODULE_LICENSE("GPL v2"); |