| /* |
| * HD audio interface patch for Conexant HDA audio codec |
| * |
| * Copyright (c) 2006 Pototskiy Akex <alex.pototskiy@gmail.com> |
| * Takashi Iwai <tiwai@suse.de> |
| * Tobin Davis <tdavis@dsl-only.net> |
| * |
| * This driver is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This driver is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/delay.h> |
| #include <linux/slab.h> |
| #include <linux/module.h> |
| #include <sound/core.h> |
| #include <sound/jack.h> |
| #include <sound/tlv.h> |
| |
| #include "hda_codec.h" |
| #include "hda_local.h" |
| #include "hda_auto_parser.h" |
| #include "hda_beep.h" |
| #include "hda_jack.h" |
| #include "hda_generic.h" |
| |
| struct conexant_spec { |
| struct hda_gen_spec gen; |
| |
| unsigned int beep_amp; |
| |
| /* extra EAPD pins */ |
| unsigned int num_eapds; |
| hda_nid_t eapds[4]; |
| bool dynamic_eapd; |
| |
| unsigned int parse_flags; /* flag for snd_hda_parse_pin_defcfg() */ |
| |
| /* OPLC XO specific */ |
| bool recording; |
| bool dc_enable; |
| unsigned int dc_input_bias; /* offset into olpc_xo_dc_bias */ |
| struct nid_path *dc_mode_path; |
| }; |
| |
| |
| #ifdef CONFIG_SND_HDA_INPUT_BEEP |
| static inline void set_beep_amp(struct conexant_spec *spec, hda_nid_t nid, |
| int idx, int dir) |
| { |
| spec->gen.beep_nid = nid; |
| spec->beep_amp = HDA_COMPOSE_AMP_VAL(nid, 1, idx, dir); |
| } |
| /* additional beep mixers; the actual parameters are overwritten at build */ |
| static const struct snd_kcontrol_new cxt_beep_mixer[] = { |
| HDA_CODEC_VOLUME_MONO("Beep Playback Volume", 0, 1, 0, HDA_OUTPUT), |
| HDA_CODEC_MUTE_BEEP_MONO("Beep Playback Switch", 0, 1, 0, HDA_OUTPUT), |
| { } /* end */ |
| }; |
| |
| /* create beep controls if needed */ |
| static int add_beep_ctls(struct hda_codec *codec) |
| { |
| struct conexant_spec *spec = codec->spec; |
| int err; |
| |
| if (spec->beep_amp) { |
| const struct snd_kcontrol_new *knew; |
| for (knew = cxt_beep_mixer; knew->name; knew++) { |
| struct snd_kcontrol *kctl; |
| kctl = snd_ctl_new1(knew, codec); |
| if (!kctl) |
| return -ENOMEM; |
| kctl->private_value = spec->beep_amp; |
| err = snd_hda_ctl_add(codec, 0, kctl); |
| if (err < 0) |
| return err; |
| } |
| } |
| return 0; |
| } |
| #else |
| #define set_beep_amp(spec, nid, idx, dir) /* NOP */ |
| #define add_beep_ctls(codec) 0 |
| #endif |
| |
| /* |
| * Automatic parser for CX20641 & co |
| */ |
| |
| #ifdef CONFIG_SND_HDA_INPUT_BEEP |
| static void cx_auto_parse_beep(struct hda_codec *codec) |
| { |
| struct conexant_spec *spec = codec->spec; |
| hda_nid_t nid, end_nid; |
| |
| end_nid = codec->start_nid + codec->num_nodes; |
| for (nid = codec->start_nid; nid < end_nid; nid++) |
| if (get_wcaps_type(get_wcaps(codec, nid)) == AC_WID_BEEP) { |
| set_beep_amp(spec, nid, 0, HDA_OUTPUT); |
| break; |
| } |
| } |
| #else |
| #define cx_auto_parse_beep(codec) |
| #endif |
| |
| /* parse EAPDs */ |
| static void cx_auto_parse_eapd(struct hda_codec *codec) |
| { |
| struct conexant_spec *spec = codec->spec; |
| hda_nid_t nid, end_nid; |
| |
| end_nid = codec->start_nid + codec->num_nodes; |
| for (nid = codec->start_nid; nid < end_nid; nid++) { |
| if (get_wcaps_type(get_wcaps(codec, nid)) != AC_WID_PIN) |
| continue; |
| if (!(snd_hda_query_pin_caps(codec, nid) & AC_PINCAP_EAPD)) |
| continue; |
| spec->eapds[spec->num_eapds++] = nid; |
| if (spec->num_eapds >= ARRAY_SIZE(spec->eapds)) |
| break; |
| } |
| |
| /* NOTE: below is a wild guess; if we have more than two EAPDs, |
| * it's a new chip, where EAPDs are supposed to be associated to |
| * pins, and we can control EAPD per pin. |
| * OTOH, if only one or two EAPDs are found, it's an old chip, |
| * thus it might control over all pins. |
| */ |
| if (spec->num_eapds > 2) |
| spec->dynamic_eapd = 1; |
| } |
| |
| static void cx_auto_turn_eapd(struct hda_codec *codec, int num_pins, |
| hda_nid_t *pins, bool on) |
| { |
| int i; |
| for (i = 0; i < num_pins; i++) { |
| if (snd_hda_query_pin_caps(codec, pins[i]) & AC_PINCAP_EAPD) |
| snd_hda_codec_write(codec, pins[i], 0, |
| AC_VERB_SET_EAPD_BTLENABLE, |
| on ? 0x02 : 0); |
| } |
| } |
| |
| /* turn on/off EAPD according to Master switch */ |
| static void cx_auto_vmaster_hook(void *private_data, int enabled) |
| { |
| struct hda_codec *codec = private_data; |
| struct conexant_spec *spec = codec->spec; |
| |
| cx_auto_turn_eapd(codec, spec->num_eapds, spec->eapds, enabled); |
| } |
| |
| static int cx_auto_build_controls(struct hda_codec *codec) |
| { |
| int err; |
| |
| err = snd_hda_gen_build_controls(codec); |
| if (err < 0) |
| return err; |
| |
| err = add_beep_ctls(codec); |
| if (err < 0) |
| return err; |
| |
| return 0; |
| } |
| |
| static int cx_auto_init(struct hda_codec *codec) |
| { |
| struct conexant_spec *spec = codec->spec; |
| snd_hda_gen_init(codec); |
| if (!spec->dynamic_eapd) |
| cx_auto_turn_eapd(codec, spec->num_eapds, spec->eapds, true); |
| |
| snd_hda_apply_fixup(codec, HDA_FIXUP_ACT_INIT); |
| |
| return 0; |
| } |
| |
| #define cx_auto_free snd_hda_gen_free |
| |
| static const struct hda_codec_ops cx_auto_patch_ops = { |
| .build_controls = cx_auto_build_controls, |
| .build_pcms = snd_hda_gen_build_pcms, |
| .init = cx_auto_init, |
| .free = cx_auto_free, |
| .unsol_event = snd_hda_jack_unsol_event, |
| #ifdef CONFIG_PM |
| .check_power_status = snd_hda_gen_check_power_status, |
| #endif |
| }; |
| |
| /* |
| * pin fix-up |
| */ |
| enum { |
| CXT_PINCFG_LENOVO_X200, |
| CXT_PINCFG_LENOVO_TP410, |
| CXT_PINCFG_LEMOTE_A1004, |
| CXT_PINCFG_LEMOTE_A1205, |
| CXT_FIXUP_STEREO_DMIC, |
| CXT_FIXUP_INC_MIC_BOOST, |
| CXT_FIXUP_HEADPHONE_MIC_PIN, |
| CXT_FIXUP_HEADPHONE_MIC, |
| CXT_FIXUP_GPIO1, |
| CXT_FIXUP_THINKPAD_ACPI, |
| CXT_FIXUP_OLPC_XO, |
| CXT_FIXUP_CAP_MIX_AMP, |
| CXT_FIXUP_TOSHIBA_P105, |
| CXT_FIXUP_HP_530, |
| CXT_FIXUP_CAP_MIX_AMP_5047, |
| }; |
| |
| /* for hda_fixup_thinkpad_acpi() */ |
| #include "thinkpad_helper.c" |
| |
| static void cxt_fixup_stereo_dmic(struct hda_codec *codec, |
| const struct hda_fixup *fix, int action) |
| { |
| struct conexant_spec *spec = codec->spec; |
| spec->gen.inv_dmic_split = 1; |
| } |
| |
| static void cxt5066_increase_mic_boost(struct hda_codec *codec, |
| const struct hda_fixup *fix, int action) |
| { |
| if (action != HDA_FIXUP_ACT_PRE_PROBE) |
| return; |
| |
| snd_hda_override_amp_caps(codec, 0x17, HDA_OUTPUT, |
| (0x3 << AC_AMPCAP_OFFSET_SHIFT) | |
| (0x4 << AC_AMPCAP_NUM_STEPS_SHIFT) | |
| (0x27 << AC_AMPCAP_STEP_SIZE_SHIFT) | |
| (0 << AC_AMPCAP_MUTE_SHIFT)); |
| } |
| |
| static void cxt_update_headset_mode(struct hda_codec *codec) |
| { |
| /* The verbs used in this function were tested on a Conexant CX20751/2 codec. */ |
| int i; |
| bool mic_mode = false; |
| struct conexant_spec *spec = codec->spec; |
| struct auto_pin_cfg *cfg = &spec->gen.autocfg; |
| |
| hda_nid_t mux_pin = spec->gen.imux_pins[spec->gen.cur_mux[0]]; |
| |
| for (i = 0; i < cfg->num_inputs; i++) |
| if (cfg->inputs[i].pin == mux_pin) { |
| mic_mode = !!cfg->inputs[i].is_headphone_mic; |
| break; |
| } |
| |
| if (mic_mode) { |
| snd_hda_codec_write_cache(codec, 0x1c, 0, 0x410, 0x7c); /* enable merged mode for analog int-mic */ |
| spec->gen.hp_jack_present = false; |
| } else { |
| snd_hda_codec_write_cache(codec, 0x1c, 0, 0x410, 0x54); /* disable merged mode for analog int-mic */ |
| spec->gen.hp_jack_present = snd_hda_jack_detect(codec, spec->gen.autocfg.hp_pins[0]); |
| } |
| |
| snd_hda_gen_update_outputs(codec); |
| } |
| |
| static void cxt_update_headset_mode_hook(struct hda_codec *codec, |
| struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| cxt_update_headset_mode(codec); |
| } |
| |
| static void cxt_fixup_headphone_mic(struct hda_codec *codec, |
| const struct hda_fixup *fix, int action) |
| { |
| struct conexant_spec *spec = codec->spec; |
| |
| switch (action) { |
| case HDA_FIXUP_ACT_PRE_PROBE: |
| spec->parse_flags |= HDA_PINCFG_HEADPHONE_MIC; |
| break; |
| case HDA_FIXUP_ACT_PROBE: |
| spec->gen.cap_sync_hook = cxt_update_headset_mode_hook; |
| spec->gen.automute_hook = cxt_update_headset_mode; |
| break; |
| case HDA_FIXUP_ACT_INIT: |
| cxt_update_headset_mode(codec); |
| break; |
| } |
| } |
| |
| /* OPLC XO 1.5 fixup */ |
| |
| /* OLPC XO-1.5 supports DC input mode (e.g. for use with analog sensors) |
| * through the microphone jack. |
| * When the user enables this through a mixer switch, both internal and |
| * external microphones are disabled. Gain is fixed at 0dB. In this mode, |
| * we also allow the bias to be configured through a separate mixer |
| * control. */ |
| |
| #define update_mic_pin(codec, nid, val) \ |
| snd_hda_codec_update_cache(codec, nid, 0, \ |
| AC_VERB_SET_PIN_WIDGET_CONTROL, val) |
| |
| static const struct hda_input_mux olpc_xo_dc_bias = { |
| .num_items = 3, |
| .items = { |
| { "Off", PIN_IN }, |
| { "50%", PIN_VREF50 }, |
| { "80%", PIN_VREF80 }, |
| }, |
| }; |
| |
| static void olpc_xo_update_mic_boost(struct hda_codec *codec) |
| { |
| struct conexant_spec *spec = codec->spec; |
| int ch, val; |
| |
| for (ch = 0; ch < 2; ch++) { |
| val = AC_AMP_SET_OUTPUT | |
| (ch ? AC_AMP_SET_RIGHT : AC_AMP_SET_LEFT); |
| if (!spec->dc_enable) |
| val |= snd_hda_codec_amp_read(codec, 0x17, ch, HDA_OUTPUT, 0); |
| snd_hda_codec_write(codec, 0x17, 0, |
| AC_VERB_SET_AMP_GAIN_MUTE, val); |
| } |
| } |
| |
| static void olpc_xo_update_mic_pins(struct hda_codec *codec) |
| { |
| struct conexant_spec *spec = codec->spec; |
| int cur_input, val; |
| struct nid_path *path; |
| |
| cur_input = spec->gen.input_paths[0][spec->gen.cur_mux[0]]; |
| |
| /* Set up mic pins for port-B, C and F dynamically as the recording |
| * LED is turned on/off by these pin controls |
| */ |
| if (!spec->dc_enable) { |
| /* disable DC bias path and pin for port F */ |
| update_mic_pin(codec, 0x1e, 0); |
| snd_hda_activate_path(codec, spec->dc_mode_path, false, false); |
| |
| /* update port B (ext mic) and C (int mic) */ |
| /* OLPC defers mic widget control until when capture is |
| * started because the microphone LED comes on as soon as |
| * these settings are put in place. if we did this before |
| * recording, it would give the false indication that |
| * recording is happening when it is not. |
| */ |
| update_mic_pin(codec, 0x1a, spec->recording ? |
| snd_hda_codec_get_pin_target(codec, 0x1a) : 0); |
| update_mic_pin(codec, 0x1b, spec->recording ? |
| snd_hda_codec_get_pin_target(codec, 0x1b) : 0); |
| /* enable normal mic path */ |
| path = snd_hda_get_path_from_idx(codec, cur_input); |
| if (path) |
| snd_hda_activate_path(codec, path, true, false); |
| } else { |
| /* disable normal mic path */ |
| path = snd_hda_get_path_from_idx(codec, cur_input); |
| if (path) |
| snd_hda_activate_path(codec, path, false, false); |
| |
| /* Even though port F is the DC input, the bias is controlled |
| * on port B. We also leave that port as an active input (but |
| * unselected) in DC mode just in case that is necessary to |
| * make the bias setting take effect. |
| */ |
| if (spec->recording) |
| val = olpc_xo_dc_bias.items[spec->dc_input_bias].index; |
| else |
| val = 0; |
| update_mic_pin(codec, 0x1a, val); |
| update_mic_pin(codec, 0x1b, 0); |
| /* enable DC bias path and pin */ |
| update_mic_pin(codec, 0x1e, spec->recording ? PIN_IN : 0); |
| snd_hda_activate_path(codec, spec->dc_mode_path, true, false); |
| } |
| } |
| |
| /* mic_autoswitch hook */ |
| static void olpc_xo_automic(struct hda_codec *codec, struct hda_jack_tbl *jack) |
| { |
| struct conexant_spec *spec = codec->spec; |
| int saved_cached_write = codec->cached_write; |
| |
| codec->cached_write = 1; |
| /* in DC mode, we don't handle automic */ |
| if (!spec->dc_enable) |
| snd_hda_gen_mic_autoswitch(codec, jack); |
| olpc_xo_update_mic_pins(codec); |
| snd_hda_codec_flush_cache(codec); |
| codec->cached_write = saved_cached_write; |
| if (spec->dc_enable) |
| olpc_xo_update_mic_boost(codec); |
| } |
| |
| /* pcm_capture hook */ |
| static void olpc_xo_capture_hook(struct hda_pcm_stream *hinfo, |
| struct hda_codec *codec, |
| struct snd_pcm_substream *substream, |
| int action) |
| { |
| struct conexant_spec *spec = codec->spec; |
| |
| /* toggle spec->recording flag and update mic pins accordingly |
| * for turning on/off LED |
| */ |
| switch (action) { |
| case HDA_GEN_PCM_ACT_PREPARE: |
| spec->recording = 1; |
| olpc_xo_update_mic_pins(codec); |
| break; |
| case HDA_GEN_PCM_ACT_CLEANUP: |
| spec->recording = 0; |
| olpc_xo_update_mic_pins(codec); |
| break; |
| } |
| } |
| |
| static int olpc_xo_dc_mode_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct hda_codec *codec = snd_kcontrol_chip(kcontrol); |
| struct conexant_spec *spec = codec->spec; |
| ucontrol->value.integer.value[0] = spec->dc_enable; |
| return 0; |
| } |
| |
| static int olpc_xo_dc_mode_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct hda_codec *codec = snd_kcontrol_chip(kcontrol); |
| struct conexant_spec *spec = codec->spec; |
| int dc_enable = !!ucontrol->value.integer.value[0]; |
| |
| if (dc_enable == spec->dc_enable) |
| return 0; |
| |
| spec->dc_enable = dc_enable; |
| olpc_xo_update_mic_pins(codec); |
| olpc_xo_update_mic_boost(codec); |
| return 1; |
| } |
| |
| static int olpc_xo_dc_bias_enum_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct hda_codec *codec = snd_kcontrol_chip(kcontrol); |
| struct conexant_spec *spec = codec->spec; |
| ucontrol->value.enumerated.item[0] = spec->dc_input_bias; |
| return 0; |
| } |
| |
| static int olpc_xo_dc_bias_enum_info(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_info *uinfo) |
| { |
| return snd_hda_input_mux_info(&olpc_xo_dc_bias, uinfo); |
| } |
| |
| static int olpc_xo_dc_bias_enum_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct hda_codec *codec = snd_kcontrol_chip(kcontrol); |
| struct conexant_spec *spec = codec->spec; |
| const struct hda_input_mux *imux = &olpc_xo_dc_bias; |
| unsigned int idx; |
| |
| idx = ucontrol->value.enumerated.item[0]; |
| if (idx >= imux->num_items) |
| idx = imux->num_items - 1; |
| if (spec->dc_input_bias == idx) |
| return 0; |
| |
| spec->dc_input_bias = idx; |
| if (spec->dc_enable) |
| olpc_xo_update_mic_pins(codec); |
| return 1; |
| } |
| |
| static const struct snd_kcontrol_new olpc_xo_mixers[] = { |
| { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| .name = "DC Mode Enable Switch", |
| .info = snd_ctl_boolean_mono_info, |
| .get = olpc_xo_dc_mode_get, |
| .put = olpc_xo_dc_mode_put, |
| }, |
| { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| .name = "DC Input Bias Enum", |
| .info = olpc_xo_dc_bias_enum_info, |
| .get = olpc_xo_dc_bias_enum_get, |
| .put = olpc_xo_dc_bias_enum_put, |
| }, |
| {} |
| }; |
| |
| /* overriding mic boost put callback; update mic boost volume only when |
| * DC mode is disabled |
| */ |
| static int olpc_xo_mic_boost_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct hda_codec *codec = snd_kcontrol_chip(kcontrol); |
| struct conexant_spec *spec = codec->spec; |
| int ret = snd_hda_mixer_amp_volume_put(kcontrol, ucontrol); |
| if (ret > 0 && spec->dc_enable) |
| olpc_xo_update_mic_boost(codec); |
| return ret; |
| } |
| |
| static void cxt_fixup_olpc_xo(struct hda_codec *codec, |
| const struct hda_fixup *fix, int action) |
| { |
| struct conexant_spec *spec = codec->spec; |
| int i; |
| |
| if (action != HDA_FIXUP_ACT_PROBE) |
| return; |
| |
| spec->gen.mic_autoswitch_hook = olpc_xo_automic; |
| spec->gen.pcm_capture_hook = olpc_xo_capture_hook; |
| spec->dc_mode_path = snd_hda_add_new_path(codec, 0x1e, 0x14, 0); |
| |
| snd_hda_add_new_ctls(codec, olpc_xo_mixers); |
| |
| /* OLPC's microphone port is DC coupled for use with external sensors, |
| * therefore we use a 50% mic bias in order to center the input signal |
| * with the DC input range of the codec. |
| */ |
| snd_hda_codec_set_pin_target(codec, 0x1a, PIN_VREF50); |
| |
| /* override mic boost control */ |
| for (i = 0; i < spec->gen.kctls.used; i++) { |
| struct snd_kcontrol_new *kctl = |
| snd_array_elem(&spec->gen.kctls, i); |
| if (!strcmp(kctl->name, "Mic Boost Volume")) { |
| kctl->put = olpc_xo_mic_boost_put; |
| break; |
| } |
| } |
| } |
| |
| /* |
| * Fix max input level on mixer widget to 0dB |
| * (originally it has 0x2b steps with 0dB offset 0x14) |
| */ |
| static void cxt_fixup_cap_mix_amp(struct hda_codec *codec, |
| const struct hda_fixup *fix, int action) |
| { |
| snd_hda_override_amp_caps(codec, 0x17, HDA_INPUT, |
| (0x14 << AC_AMPCAP_OFFSET_SHIFT) | |
| (0x14 << AC_AMPCAP_NUM_STEPS_SHIFT) | |
| (0x05 << AC_AMPCAP_STEP_SIZE_SHIFT) | |
| (1 << AC_AMPCAP_MUTE_SHIFT)); |
| } |
| |
| /* |
| * Fix max input level on mixer widget to 0dB |
| * (originally it has 0x1e steps with 0 dB offset 0x17) |
| */ |
| static void cxt_fixup_cap_mix_amp_5047(struct hda_codec *codec, |
| const struct hda_fixup *fix, int action) |
| { |
| snd_hda_override_amp_caps(codec, 0x10, HDA_INPUT, |
| (0x17 << AC_AMPCAP_OFFSET_SHIFT) | |
| (0x17 << AC_AMPCAP_NUM_STEPS_SHIFT) | |
| (0x05 << AC_AMPCAP_STEP_SIZE_SHIFT) | |
| (1 << AC_AMPCAP_MUTE_SHIFT)); |
| } |
| |
| /* ThinkPad X200 & co with cxt5051 */ |
| static const struct hda_pintbl cxt_pincfg_lenovo_x200[] = { |
| { 0x16, 0x042140ff }, /* HP (seq# overridden) */ |
| { 0x17, 0x21a11000 }, /* dock-mic */ |
| { 0x19, 0x2121103f }, /* dock-HP */ |
| { 0x1c, 0x21440100 }, /* dock SPDIF out */ |
| {} |
| }; |
| |
| /* ThinkPad 410/420/510/520, X201 & co with cxt5066 */ |
| static const struct hda_pintbl cxt_pincfg_lenovo_tp410[] = { |
| { 0x19, 0x042110ff }, /* HP (seq# overridden) */ |
| { 0x1a, 0x21a190f0 }, /* dock-mic */ |
| { 0x1c, 0x212140ff }, /* dock-HP */ |
| {} |
| }; |
| |
| /* Lemote A1004/A1205 with cxt5066 */ |
| static const struct hda_pintbl cxt_pincfg_lemote[] = { |
| { 0x1a, 0x90a10020 }, /* Internal mic */ |
| { 0x1b, 0x03a11020 }, /* External mic */ |
| { 0x1d, 0x400101f0 }, /* Not used */ |
| { 0x1e, 0x40a701f0 }, /* Not used */ |
| { 0x20, 0x404501f0 }, /* Not used */ |
| { 0x22, 0x404401f0 }, /* Not used */ |
| { 0x23, 0x40a701f0 }, /* Not used */ |
| {} |
| }; |
| |
| static const struct hda_fixup cxt_fixups[] = { |
| [CXT_PINCFG_LENOVO_X200] = { |
| .type = HDA_FIXUP_PINS, |
| .v.pins = cxt_pincfg_lenovo_x200, |
| }, |
| [CXT_PINCFG_LENOVO_TP410] = { |
| .type = HDA_FIXUP_PINS, |
| .v.pins = cxt_pincfg_lenovo_tp410, |
| .chained = true, |
| .chain_id = CXT_FIXUP_THINKPAD_ACPI, |
| }, |
| [CXT_PINCFG_LEMOTE_A1004] = { |
| .type = HDA_FIXUP_PINS, |
| .chained = true, |
| .chain_id = CXT_FIXUP_INC_MIC_BOOST, |
| .v.pins = cxt_pincfg_lemote, |
| }, |
| [CXT_PINCFG_LEMOTE_A1205] = { |
| .type = HDA_FIXUP_PINS, |
| .v.pins = cxt_pincfg_lemote, |
| }, |
| [CXT_FIXUP_STEREO_DMIC] = { |
| .type = HDA_FIXUP_FUNC, |
| .v.func = cxt_fixup_stereo_dmic, |
| }, |
| [CXT_FIXUP_INC_MIC_BOOST] = { |
| .type = HDA_FIXUP_FUNC, |
| .v.func = cxt5066_increase_mic_boost, |
| }, |
| [CXT_FIXUP_HEADPHONE_MIC_PIN] = { |
| .type = HDA_FIXUP_PINS, |
| .chained = true, |
| .chain_id = CXT_FIXUP_HEADPHONE_MIC, |
| .v.pins = (const struct hda_pintbl[]) { |
| { 0x18, 0x03a1913d }, /* use as headphone mic, without its own jack detect */ |
| { } |
| } |
| }, |
| [CXT_FIXUP_HEADPHONE_MIC] = { |
| .type = HDA_FIXUP_FUNC, |
| .v.func = cxt_fixup_headphone_mic, |
| }, |
| [CXT_FIXUP_GPIO1] = { |
| .type = HDA_FIXUP_VERBS, |
| .v.verbs = (const struct hda_verb[]) { |
| { 0x01, AC_VERB_SET_GPIO_MASK, 0x01 }, |
| { 0x01, AC_VERB_SET_GPIO_DIRECTION, 0x01 }, |
| { 0x01, AC_VERB_SET_GPIO_DATA, 0x01 }, |
| { } |
| }, |
| }, |
| [CXT_FIXUP_THINKPAD_ACPI] = { |
| .type = HDA_FIXUP_FUNC, |
| .v.func = hda_fixup_thinkpad_acpi, |
| }, |
| [CXT_FIXUP_OLPC_XO] = { |
| .type = HDA_FIXUP_FUNC, |
| .v.func = cxt_fixup_olpc_xo, |
| }, |
| [CXT_FIXUP_CAP_MIX_AMP] = { |
| .type = HDA_FIXUP_FUNC, |
| .v.func = cxt_fixup_cap_mix_amp, |
| }, |
| [CXT_FIXUP_TOSHIBA_P105] = { |
| .type = HDA_FIXUP_PINS, |
| .v.pins = (const struct hda_pintbl[]) { |
| { 0x10, 0x961701f0 }, /* speaker/hp */ |
| { 0x12, 0x02a1901e }, /* ext mic */ |
| { 0x14, 0x95a70110 }, /* int mic */ |
| {} |
| }, |
| }, |
| [CXT_FIXUP_HP_530] = { |
| .type = HDA_FIXUP_PINS, |
| .v.pins = (const struct hda_pintbl[]) { |
| { 0x12, 0x90a60160 }, /* int mic */ |
| {} |
| }, |
| .chained = true, |
| .chain_id = CXT_FIXUP_CAP_MIX_AMP, |
| }, |
| [CXT_FIXUP_CAP_MIX_AMP_5047] = { |
| .type = HDA_FIXUP_FUNC, |
| .v.func = cxt_fixup_cap_mix_amp_5047, |
| }, |
| }; |
| |
| static const struct snd_pci_quirk cxt5045_fixups[] = { |
| SND_PCI_QUIRK(0x103c, 0x30d5, "HP 530", CXT_FIXUP_HP_530), |
| SND_PCI_QUIRK(0x1179, 0xff31, "Toshiba P105", CXT_FIXUP_TOSHIBA_P105), |
| /* HP, Packard Bell, Fujitsu-Siemens & Lenovo laptops have |
| * really bad sound over 0dB on NID 0x17. |
| */ |
| SND_PCI_QUIRK_VENDOR(0x103c, "HP", CXT_FIXUP_CAP_MIX_AMP), |
| SND_PCI_QUIRK_VENDOR(0x1631, "Packard Bell", CXT_FIXUP_CAP_MIX_AMP), |
| SND_PCI_QUIRK_VENDOR(0x1734, "Fujitsu", CXT_FIXUP_CAP_MIX_AMP), |
| SND_PCI_QUIRK_VENDOR(0x17aa, "Lenovo", CXT_FIXUP_CAP_MIX_AMP), |
| {} |
| }; |
| |
| static const struct hda_model_fixup cxt5045_fixup_models[] = { |
| { .id = CXT_FIXUP_CAP_MIX_AMP, .name = "cap-mix-amp" }, |
| { .id = CXT_FIXUP_TOSHIBA_P105, .name = "toshiba-p105" }, |
| { .id = CXT_FIXUP_HP_530, .name = "hp-530" }, |
| {} |
| }; |
| |
| static const struct snd_pci_quirk cxt5047_fixups[] = { |
| /* HP laptops have really bad sound over 0 dB on NID 0x10. |
| */ |
| SND_PCI_QUIRK_VENDOR(0x103c, "HP", CXT_FIXUP_CAP_MIX_AMP_5047), |
| {} |
| }; |
| |
| static const struct hda_model_fixup cxt5047_fixup_models[] = { |
| { .id = CXT_FIXUP_CAP_MIX_AMP_5047, .name = "cap-mix-amp" }, |
| {} |
| }; |
| |
| static const struct snd_pci_quirk cxt5051_fixups[] = { |
| SND_PCI_QUIRK(0x17aa, 0x20f2, "Lenovo X200", CXT_PINCFG_LENOVO_X200), |
| {} |
| }; |
| |
| static const struct hda_model_fixup cxt5051_fixup_models[] = { |
| { .id = CXT_PINCFG_LENOVO_X200, .name = "lenovo-x200" }, |
| {} |
| }; |
| |
| static const struct snd_pci_quirk cxt5066_fixups[] = { |
| SND_PCI_QUIRK(0x1025, 0x0543, "Acer Aspire One 522", CXT_FIXUP_STEREO_DMIC), |
| SND_PCI_QUIRK(0x1025, 0x054c, "Acer Aspire 3830TG", CXT_FIXUP_GPIO1), |
| SND_PCI_QUIRK(0x1043, 0x138d, "Asus", CXT_FIXUP_HEADPHONE_MIC_PIN), |
| SND_PCI_QUIRK(0x152d, 0x0833, "OLPC XO-1.5", CXT_FIXUP_OLPC_XO), |
| SND_PCI_QUIRK(0x17aa, 0x20f2, "Lenovo T400", CXT_PINCFG_LENOVO_TP410), |
| SND_PCI_QUIRK(0x17aa, 0x215e, "Lenovo T410", CXT_PINCFG_LENOVO_TP410), |
| SND_PCI_QUIRK(0x17aa, 0x215f, "Lenovo T510", CXT_PINCFG_LENOVO_TP410), |
| SND_PCI_QUIRK(0x17aa, 0x21ce, "Lenovo T420", CXT_PINCFG_LENOVO_TP410), |
| SND_PCI_QUIRK(0x17aa, 0x21cf, "Lenovo T520", CXT_PINCFG_LENOVO_TP410), |
| SND_PCI_QUIRK(0x17aa, 0x21da, "Lenovo X220", CXT_PINCFG_LENOVO_TP410), |
| SND_PCI_QUIRK(0x17aa, 0x21db, "Lenovo X220-tablet", CXT_PINCFG_LENOVO_TP410), |
| SND_PCI_QUIRK(0x17aa, 0x3975, "Lenovo U300s", CXT_FIXUP_STEREO_DMIC), |
| SND_PCI_QUIRK(0x17aa, 0x3977, "Lenovo IdeaPad U310", CXT_FIXUP_STEREO_DMIC), |
| SND_PCI_QUIRK(0x17aa, 0x397b, "Lenovo S205", CXT_FIXUP_STEREO_DMIC), |
| SND_PCI_QUIRK_VENDOR(0x17aa, "Thinkpad", CXT_FIXUP_THINKPAD_ACPI), |
| SND_PCI_QUIRK(0x1c06, 0x2011, "Lemote A1004", CXT_PINCFG_LEMOTE_A1004), |
| SND_PCI_QUIRK(0x1c06, 0x2012, "Lemote A1205", CXT_PINCFG_LEMOTE_A1205), |
| {} |
| }; |
| |
| static const struct hda_model_fixup cxt5066_fixup_models[] = { |
| { .id = CXT_FIXUP_STEREO_DMIC, .name = "stereo-dmic" }, |
| { .id = CXT_FIXUP_GPIO1, .name = "gpio1" }, |
| { .id = CXT_FIXUP_HEADPHONE_MIC_PIN, .name = "headphone-mic-pin" }, |
| { .id = CXT_PINCFG_LENOVO_TP410, .name = "tp410" }, |
| { .id = CXT_FIXUP_THINKPAD_ACPI, .name = "thinkpad" }, |
| { .id = CXT_PINCFG_LEMOTE_A1004, .name = "lemote-a1004" }, |
| { .id = CXT_FIXUP_OLPC_XO, .name = "olpc-xo" }, |
| {} |
| }; |
| |
| /* add "fake" mute amp-caps to DACs on cx5051 so that mixer mute switches |
| * can be created (bko#42825) |
| */ |
| static void add_cx5051_fake_mutes(struct hda_codec *codec) |
| { |
| static hda_nid_t out_nids[] = { |
| 0x10, 0x11, 0 |
| }; |
| hda_nid_t *p; |
| |
| for (p = out_nids; *p; p++) |
| snd_hda_override_amp_caps(codec, *p, HDA_OUTPUT, |
| AC_AMPCAP_MIN_MUTE | |
| query_amp_caps(codec, *p, HDA_OUTPUT)); |
| } |
| |
| static int patch_conexant_auto(struct hda_codec *codec) |
| { |
| struct conexant_spec *spec; |
| int err; |
| |
| codec_info(codec, "%s: BIOS auto-probing.\n", codec->chip_name); |
| |
| spec = kzalloc(sizeof(*spec), GFP_KERNEL); |
| if (!spec) |
| return -ENOMEM; |
| snd_hda_gen_spec_init(&spec->gen); |
| codec->spec = spec; |
| |
| cx_auto_parse_beep(codec); |
| cx_auto_parse_eapd(codec); |
| spec->gen.own_eapd_ctl = 1; |
| if (spec->dynamic_eapd) |
| spec->gen.vmaster_mute.hook = cx_auto_vmaster_hook; |
| |
| switch (codec->vendor_id) { |
| case 0x14f15045: |
| codec->single_adc_amp = 1; |
| spec->gen.mixer_nid = 0x17; |
| spec->gen.add_stereo_mix_input = 1; |
| snd_hda_pick_fixup(codec, cxt5045_fixup_models, |
| cxt5045_fixups, cxt_fixups); |
| break; |
| case 0x14f15047: |
| codec->pin_amp_workaround = 1; |
| spec->gen.mixer_nid = 0x19; |
| spec->gen.add_stereo_mix_input = 1; |
| snd_hda_pick_fixup(codec, cxt5047_fixup_models, |
| cxt5047_fixups, cxt_fixups); |
| break; |
| case 0x14f15051: |
| add_cx5051_fake_mutes(codec); |
| codec->pin_amp_workaround = 1; |
| snd_hda_pick_fixup(codec, cxt5051_fixup_models, |
| cxt5051_fixups, cxt_fixups); |
| break; |
| default: |
| codec->pin_amp_workaround = 1; |
| snd_hda_pick_fixup(codec, cxt5066_fixup_models, |
| cxt5066_fixups, cxt_fixups); |
| break; |
| } |
| |
| /* Show mute-led control only on HP laptops |
| * This is a sort of white-list: on HP laptops, EAPD corresponds |
| * only to the mute-LED without actualy amp function. Meanwhile, |
| * others may use EAPD really as an amp switch, so it might be |
| * not good to expose it blindly. |
| */ |
| switch (codec->subsystem_id >> 16) { |
| case 0x103c: |
| spec->gen.vmaster_mute_enum = 1; |
| break; |
| } |
| |
| snd_hda_apply_fixup(codec, HDA_FIXUP_ACT_PRE_PROBE); |
| |
| err = snd_hda_parse_pin_defcfg(codec, &spec->gen.autocfg, NULL, |
| spec->parse_flags); |
| if (err < 0) |
| goto error; |
| |
| err = snd_hda_gen_parse_auto_config(codec, &spec->gen.autocfg); |
| if (err < 0) |
| goto error; |
| |
| if (codec->vendor_id == 0x14f15051) { |
| /* minimum value is actually mute */ |
| spec->gen.vmaster_tlv[3] |= TLV_DB_SCALE_MUTE; |
| } |
| |
| codec->patch_ops = cx_auto_patch_ops; |
| |
| /* Some laptops with Conexant chips show stalls in S3 resume, |
| * which falls into the single-cmd mode. |
| * Better to make reset, then. |
| */ |
| if (!codec->bus->sync_write) { |
| codec_info(codec, |
| "Enable sync_write for stable communication\n"); |
| codec->bus->sync_write = 1; |
| codec->bus->allow_bus_reset = 1; |
| } |
| |
| snd_hda_apply_fixup(codec, HDA_FIXUP_ACT_PROBE); |
| |
| return 0; |
| |
| error: |
| cx_auto_free(codec); |
| return err; |
| } |
| |
| /* |
| */ |
| |
| static const struct hda_codec_preset snd_hda_preset_conexant[] = { |
| { .id = 0x14f15045, .name = "CX20549 (Venice)", |
| .patch = patch_conexant_auto }, |
| { .id = 0x14f15047, .name = "CX20551 (Waikiki)", |
| .patch = patch_conexant_auto }, |
| { .id = 0x14f15051, .name = "CX20561 (Hermosa)", |
| .patch = patch_conexant_auto }, |
| { .id = 0x14f15066, .name = "CX20582 (Pebble)", |
| .patch = patch_conexant_auto }, |
| { .id = 0x14f15067, .name = "CX20583 (Pebble HSF)", |
| .patch = patch_conexant_auto }, |
| { .id = 0x14f15068, .name = "CX20584", |
| .patch = patch_conexant_auto }, |
| { .id = 0x14f15069, .name = "CX20585", |
| .patch = patch_conexant_auto }, |
| { .id = 0x14f1506c, .name = "CX20588", |
| .patch = patch_conexant_auto }, |
| { .id = 0x14f1506e, .name = "CX20590", |
| .patch = patch_conexant_auto }, |
| { .id = 0x14f15097, .name = "CX20631", |
| .patch = patch_conexant_auto }, |
| { .id = 0x14f15098, .name = "CX20632", |
| .patch = patch_conexant_auto }, |
| { .id = 0x14f150a1, .name = "CX20641", |
| .patch = patch_conexant_auto }, |
| { .id = 0x14f150a2, .name = "CX20642", |
| .patch = patch_conexant_auto }, |
| { .id = 0x14f150ab, .name = "CX20651", |
| .patch = patch_conexant_auto }, |
| { .id = 0x14f150ac, .name = "CX20652", |
| .patch = patch_conexant_auto }, |
| { .id = 0x14f150b8, .name = "CX20664", |
| .patch = patch_conexant_auto }, |
| { .id = 0x14f150b9, .name = "CX20665", |
| .patch = patch_conexant_auto }, |
| { .id = 0x14f1510f, .name = "CX20751/2", |
| .patch = patch_conexant_auto }, |
| { .id = 0x14f15110, .name = "CX20751/2", |
| .patch = patch_conexant_auto }, |
| { .id = 0x14f15111, .name = "CX20753/4", |
| .patch = patch_conexant_auto }, |
| { .id = 0x14f15113, .name = "CX20755", |
| .patch = patch_conexant_auto }, |
| { .id = 0x14f15114, .name = "CX20756", |
| .patch = patch_conexant_auto }, |
| { .id = 0x14f15115, .name = "CX20757", |
| .patch = patch_conexant_auto }, |
| { .id = 0x14f151d7, .name = "CX20952", |
| .patch = patch_conexant_auto }, |
| {} /* terminator */ |
| }; |
| |
| MODULE_ALIAS("snd-hda-codec-id:14f15045"); |
| MODULE_ALIAS("snd-hda-codec-id:14f15047"); |
| MODULE_ALIAS("snd-hda-codec-id:14f15051"); |
| MODULE_ALIAS("snd-hda-codec-id:14f15066"); |
| MODULE_ALIAS("snd-hda-codec-id:14f15067"); |
| MODULE_ALIAS("snd-hda-codec-id:14f15068"); |
| MODULE_ALIAS("snd-hda-codec-id:14f15069"); |
| MODULE_ALIAS("snd-hda-codec-id:14f1506c"); |
| MODULE_ALIAS("snd-hda-codec-id:14f1506e"); |
| MODULE_ALIAS("snd-hda-codec-id:14f15097"); |
| MODULE_ALIAS("snd-hda-codec-id:14f15098"); |
| MODULE_ALIAS("snd-hda-codec-id:14f150a1"); |
| MODULE_ALIAS("snd-hda-codec-id:14f150a2"); |
| MODULE_ALIAS("snd-hda-codec-id:14f150ab"); |
| MODULE_ALIAS("snd-hda-codec-id:14f150ac"); |
| MODULE_ALIAS("snd-hda-codec-id:14f150b8"); |
| MODULE_ALIAS("snd-hda-codec-id:14f150b9"); |
| MODULE_ALIAS("snd-hda-codec-id:14f1510f"); |
| MODULE_ALIAS("snd-hda-codec-id:14f15110"); |
| MODULE_ALIAS("snd-hda-codec-id:14f15111"); |
| MODULE_ALIAS("snd-hda-codec-id:14f15113"); |
| MODULE_ALIAS("snd-hda-codec-id:14f15114"); |
| MODULE_ALIAS("snd-hda-codec-id:14f15115"); |
| MODULE_ALIAS("snd-hda-codec-id:14f151d7"); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_DESCRIPTION("Conexant HD-audio codec"); |
| |
| static struct hda_codec_preset_list conexant_list = { |
| .preset = snd_hda_preset_conexant, |
| .owner = THIS_MODULE, |
| }; |
| |
| static int __init patch_conexant_init(void) |
| { |
| return snd_hda_add_codec_preset(&conexant_list); |
| } |
| |
| static void __exit patch_conexant_exit(void) |
| { |
| snd_hda_delete_codec_preset(&conexant_list); |
| } |
| |
| module_init(patch_conexant_init) |
| module_exit(patch_conexant_exit) |