| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/dma/snps,dw-axi-dmac.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: Synopsys DesignWare AXI DMA Controller |
| |
| maintainers: |
| - Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> |
| |
| description: |
| Synopsys DesignWare AXI DMA Controller DT Binding |
| |
| allOf: |
| - $ref: dma-controller.yaml# |
| |
| properties: |
| compatible: |
| enum: |
| - snps,axi-dma-1.01a |
| - intel,kmb-axi-dma |
| - starfive,jh7110-axi-dma |
| - starfive,jh8100-axi-dma |
| |
| reg: |
| minItems: 1 |
| items: |
| - description: Address range of the DMAC registers |
| - description: Address range of the DMAC APB registers |
| |
| reg-names: |
| items: |
| - const: axidma_ctrl_regs |
| - const: axidma_apb_regs |
| |
| interrupts: |
| description: |
| If the IP-core synthesis parameter DMAX_INTR_IO_TYPE is set to 1, this |
| will be per-channel interrupts. Otherwise, this is a single combined IRQ |
| for all channels. |
| minItems: 1 |
| maxItems: 8 |
| |
| clocks: |
| items: |
| - description: Bus Clock |
| - description: Module Clock |
| |
| clock-names: |
| items: |
| - const: core-clk |
| - const: cfgr-clk |
| |
| '#dma-cells': |
| const: 1 |
| |
| dma-channels: |
| minimum: 1 |
| maximum: 8 |
| |
| resets: |
| minItems: 1 |
| maxItems: 2 |
| |
| snps,dma-masters: |
| description: | |
| Number of AXI masters supported by the hardware. |
| $ref: /schemas/types.yaml#/definitions/uint32 |
| enum: [1, 2] |
| |
| snps,data-width: |
| description: | |
| AXI data width supported by hardware. |
| (0 - 8bits, 1 - 16bits, 2 - 32bits, ..., 6 - 512bits) |
| $ref: /schemas/types.yaml#/definitions/uint32 |
| enum: [0, 1, 2, 3, 4, 5, 6] |
| |
| snps,priority: |
| description: | |
| Channel priority specifier associated with the DMA channels. |
| $ref: /schemas/types.yaml#/definitions/uint32-array |
| minItems: 1 |
| maxItems: 8 |
| |
| snps,block-size: |
| description: | |
| Channel block size specifier associated with the DMA channels. |
| $ref: /schemas/types.yaml#/definitions/uint32-array |
| minItems: 1 |
| maxItems: 8 |
| |
| snps,axi-max-burst-len: |
| description: | |
| Restrict master AXI burst length by value specified in this property. |
| If this property is missing the maximum AXI burst length supported by |
| DMAC is used. |
| $ref: /schemas/types.yaml#/definitions/uint32 |
| minimum: 1 |
| maximum: 256 |
| |
| required: |
| - compatible |
| - reg |
| - clocks |
| - clock-names |
| - interrupts |
| - '#dma-cells' |
| - dma-channels |
| - snps,dma-masters |
| - snps,data-width |
| - snps,priority |
| - snps,block-size |
| |
| if: |
| properties: |
| compatible: |
| contains: |
| enum: |
| - starfive,jh7110-axi-dma |
| then: |
| properties: |
| resets: |
| minItems: 2 |
| items: |
| - description: AXI reset line |
| - description: AHB reset line |
| - description: module reset |
| else: |
| properties: |
| resets: |
| maxItems: 1 |
| |
| additionalProperties: false |
| |
| examples: |
| - | |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/interrupt-controller/irq.h> |
| /* example with snps,dw-axi-dmac */ |
| dma-controller@80000 { |
| compatible = "snps,axi-dma-1.01a"; |
| reg = <0x80000 0x400>; |
| clocks = <&core_clk>, <&cfgr_clk>; |
| clock-names = "core-clk", "cfgr-clk"; |
| interrupt-parent = <&intc>; |
| interrupts = <27>; |
| #dma-cells = <1>; |
| dma-channels = <4>; |
| snps,dma-masters = <2>; |
| snps,data-width = <3>; |
| snps,block-size = <4096 4096 4096 4096>; |
| snps,priority = <0 1 2 3>; |
| snps,axi-max-burst-len = <16>; |
| }; |