| # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/mfd/stericsson,db8500-prcmu.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: ST-Ericsson DB8500 PRCMU - Power Reset and Control Management Unit |
| |
| maintainers: |
| - Linus Walleij <linus.walleij@linaro.org> |
| |
| description: |
| The DB8500 Power Reset and Control Management Unit is an XP70 8-bit |
| microprocessor that is embedded in the always-on power domain of the |
| DB8500 SoCs to manage the low power states, powering up and down parts |
| of the silicon, and controlling reset of different IP blocks. |
| |
| properties: |
| $nodename: |
| pattern: '^prcmu@[0-9a-f]+$' |
| |
| compatible: |
| description: The device is compatible both to the device-specific |
| compatible "stericsson,db8500-prcmu" and "syscon". The latter |
| compatible is needed for the device to be exposed as a system |
| controller so that arbitrary registers can be access by |
| different operating system components. |
| items: |
| - const: stericsson,db8500-prcmu |
| - const: syscon |
| |
| reg: |
| items: |
| - description: Main PRCMU register area |
| - description: PRCMU TCPM register area |
| - description: PRCMU TCDM register area |
| |
| reg-names: |
| items: |
| - const: prcmu |
| - const: prcmu-tcpm |
| - const: prcmu-tcdm |
| |
| interrupts: |
| maxItems: 1 |
| |
| '#address-cells': |
| const: 1 |
| |
| '#size-cells': |
| const: 1 |
| |
| ranges: true |
| |
| interrupt-controller: true |
| |
| '#interrupt-cells': |
| const: 2 |
| |
| db8500-prcmu-regulators: |
| description: Node describing the DB8500 regulators. These are mainly |
| power rails inside the silicon but some of those are also routed |
| out to external pins. |
| type: object |
| |
| properties: |
| compatible: |
| const: stericsson,db8500-prcmu-regulator |
| |
| db8500_vape: |
| description: The voltage for the application processor, the |
| main voltage domain for the chip. |
| type: object |
| $ref: /schemas/regulator/regulator.yaml# |
| unevaluatedProperties: false |
| |
| db8500_varm: |
| description: The voltage for the ARM Cortex-A9 CPU. |
| type: object |
| $ref: /schemas/regulator/regulator.yaml# |
| unevaluatedProperties: false |
| |
| db8500_vmodem: |
| description: The voltage for the modem subsystem. |
| type: object |
| $ref: /schemas/regulator/regulator.yaml# |
| unevaluatedProperties: false |
| |
| db8500_vpll: |
| description: The voltage for the phase locked loop clocks. |
| type: object |
| $ref: /schemas/regulator/regulator.yaml# |
| unevaluatedProperties: false |
| |
| db8500_vsmps1: |
| description: Also known as VIO12, is a step-down voltage regulator |
| for 1.2V I/O. SMPS means System Management Power Source. |
| type: object |
| $ref: /schemas/regulator/regulator.yaml# |
| unevaluatedProperties: false |
| |
| db8500_vsmps2: |
| description: Also known as VIO18, is a step-down voltage regulator |
| for 1.8V I/O. SMPS means System Management Power Source. |
| type: object |
| $ref: /schemas/regulator/regulator.yaml# |
| unevaluatedProperties: false |
| |
| db8500_vsmps3: |
| description: This is a step-down voltage regulator |
| for 0.87 thru 1.875V I/O. SMPS means System Management Power Source. |
| type: object |
| $ref: /schemas/regulator/regulator.yaml# |
| unevaluatedProperties: false |
| |
| db8500_vrf1: |
| description: RF transceiver voltage regulator. |
| type: object |
| $ref: /schemas/regulator/regulator.yaml# |
| unevaluatedProperties: false |
| |
| db8500_sva_mmdsp: |
| description: Smart Video Accelerator (SVA) multimedia DSP (MMDSP) |
| voltage regulator. This is the voltage for the accelerator DSP |
| for video encoding and decoding. |
| type: object |
| $ref: /schemas/regulator/regulator.yaml# |
| unevaluatedProperties: false |
| |
| db8500_sva_mmdsp_ret: |
| description: Smart Video Accelerator (SVA) multimedia DSP (MMDSP) |
| voltage regulator for retention mode. |
| type: object |
| $ref: /schemas/regulator/regulator.yaml# |
| unevaluatedProperties: false |
| |
| db8500_sva_pipe: |
| description: Smart Video Accelerator (SVA) multimedia DSP (MMDSP) |
| voltage regulator for the data pipe. |
| type: object |
| $ref: /schemas/regulator/regulator.yaml# |
| unevaluatedProperties: false |
| |
| db8500_sia_mmdsp: |
| description: Smart Image Accelerator (SIA) multimedia DSP (MMDSP) |
| voltage regulator. This is the voltage for the accelerator DSP |
| for image encoding and decoding. |
| type: object |
| $ref: /schemas/regulator/regulator.yaml# |
| unevaluatedProperties: false |
| |
| db8500_sia_mmdsp_ret: |
| description: Smart Image Accelerator (SIA) multimedia DSP (MMDSP) |
| voltage regulator for retention mode. |
| type: object |
| $ref: /schemas/regulator/regulator.yaml# |
| unevaluatedProperties: false |
| |
| db8500_sia_pipe: |
| description: Smart Image Accelerator (SIA) multimedia DSP (MMDSP) |
| voltage regulator for the data pipe. |
| type: object |
| $ref: /schemas/regulator/regulator.yaml# |
| unevaluatedProperties: false |
| |
| db8500_sga: |
| description: Smart Graphics Accelerator (SGA) voltage regulator. |
| This is in effect controlling the power to the MALI400 3D |
| accelerator block. |
| type: object |
| $ref: /schemas/regulator/regulator.yaml# |
| unevaluatedProperties: false |
| |
| db8500_b2r2_mcde: |
| description: Blit Blend Rotate and Rescale (B2R2), and Multi-Channel |
| Display Engine (MCDE) voltage regulator. These are two graphics |
| blocks. |
| type: object |
| $ref: /schemas/regulator/regulator.yaml# |
| unevaluatedProperties: false |
| |
| db8500_esram12: |
| description: Embedded Static RAM (ESRAM) 1 and 2 voltage regulator. |
| type: object |
| $ref: /schemas/regulator/regulator.yaml# |
| unevaluatedProperties: false |
| |
| db8500_esram12_ret: |
| description: Embedded Static RAM (ESRAM) 1 and 2 voltage regulator for |
| retention mode. |
| type: object |
| $ref: /schemas/regulator/regulator.yaml# |
| unevaluatedProperties: false |
| |
| db8500_esram34: |
| description: Embedded Static RAM (ESRAM) 3 and 4 voltage regulator. |
| type: object |
| $ref: /schemas/regulator/regulator.yaml# |
| unevaluatedProperties: false |
| |
| db8500_esram34_ret: |
| description: Embedded Static RAM (ESRAM) 3 and 4 voltage regulator for |
| retention mode. |
| type: object |
| $ref: /schemas/regulator/regulator.yaml# |
| unevaluatedProperties: false |
| |
| required: |
| - compatible |
| - db8500_vape |
| - db8500_varm |
| - db8500_vmodem |
| - db8500_vpll |
| - db8500_vsmps1 |
| - db8500_vsmps2 |
| - db8500_vsmps3 |
| - db8500_vrf1 |
| - db8500_sva_mmdsp |
| - db8500_sva_mmdsp_ret |
| - db8500_sva_pipe |
| - db8500_sia_mmdsp |
| - db8500_sia_mmdsp_ret |
| - db8500_sia_pipe |
| - db8500_sga |
| - db8500_b2r2_mcde |
| - db8500_esram12 |
| - db8500_esram12_ret |
| - db8500_esram34 |
| - db8500_esram34_ret |
| |
| additionalProperties: false |
| |
| patternProperties: |
| "^thermal@[0-9a-f]+$": |
| description: Node describing the DB8500 thermal control functions. |
| This binds to an operating system driver that monitors the |
| temperature of the SoC. |
| type: object |
| |
| properties: |
| compatible: |
| const: stericsson,db8500-thermal |
| |
| reg: |
| maxItems: 1 |
| |
| interrupts: |
| items: |
| - description: Hotmon low interrupt (falling temperature) |
| - description: Hotmon high interrupt (rising temperature) |
| |
| interrupt-names: |
| items: |
| - const: IRQ_HOTMON_LOW |
| - const: IRQ_HOTMON_HIGH |
| |
| '#thermal-sensor-cells': |
| const: 0 |
| |
| additionalProperties: false |
| |
| "^prcmu-timer-4@[0-9a-f]+$": |
| description: Node describing the externally visible timer 4 in the |
| PRCMU block. This timer is interesting to the operating system |
| since even thought it has a very low resolution (32768 Hz) it is |
| always on, and thus provides a consistent monotonic timeline for |
| the system. |
| type: object |
| |
| properties: |
| compatible: |
| const: stericsson,db8500-prcmu-timer-4 |
| |
| reg: |
| maxItems: 1 |
| |
| additionalProperties: false |
| |
| "^ab850[05]$": |
| description: Node describing the Analog Baseband 8500 mixed-signals |
| ASIC AB8500 and subcomponents. The AB8500 is accessed through the |
| PRCMU and hence it appears here. This component has a separate |
| set of devicetree bindings. The AB8505 is a newer version of the |
| same ASIC. |
| type: object |
| $ref: stericsson,ab8500.yaml# |
| |
| required: |
| - compatible |
| - reg |
| - '#address-cells' |
| - '#size-cells' |
| - ranges |
| - interrupts |
| - interrupt-controller |
| - '#interrupt-cells' |
| - db8500-prcmu-regulators |
| |
| additionalProperties: false |
