| # SPDX-License-Identifier: GPL-2.0 |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/mfd/x-powers,axp152.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: X-Powers AXP PMIC |
| |
| maintainers: |
| - Chen-Yu Tsai <wens@csie.org> |
| |
| allOf: |
| - if: |
| properties: |
| compatible: |
| contains: |
| enum: |
| - x-powers,axp152 |
| - x-powers,axp202 |
| - x-powers,axp209 |
| |
| then: |
| properties: |
| regulators: |
| properties: |
| x-powers,dcdc-freq: |
| minimum: 750 |
| maximum: 1875 |
| default: 1500 |
| |
| else: |
| properties: |
| regulators: |
| properties: |
| x-powers,dcdc-freq: |
| minimum: 1800 |
| maximum: 4050 |
| default: 3000 |
| |
| - if: |
| properties: |
| compatible: |
| contains: |
| enum: |
| - x-powers,axp152 |
| - x-powers,axp202 |
| - x-powers,axp209 |
| |
| then: |
| properties: |
| x-powers,drive-vbus-en: false |
| |
| - if: |
| not: |
| properties: |
| compatible: |
| contains: |
| const: x-powers,axp806 |
| |
| then: |
| properties: |
| x-powers,self-working-mode: false |
| x-powers,master-mode: false |
| |
| - if: |
| not: |
| properties: |
| compatible: |
| contains: |
| enum: |
| - x-powers,axp15060 |
| - x-powers,axp305 |
| - x-powers,axp313a |
| |
| then: |
| required: |
| - interrupts |
| |
| - if: |
| properties: |
| compatible: |
| contains: |
| enum: |
| - x-powers,axp313a |
| - x-powers,axp15060 |
| - x-powers,axp717 |
| |
| then: |
| properties: |
| x-powers,dcdc-freq: false |
| |
| properties: |
| compatible: |
| oneOf: |
| - enum: |
| - x-powers,axp152 |
| - x-powers,axp192 |
| - x-powers,axp202 |
| - x-powers,axp209 |
| - x-powers,axp221 |
| - x-powers,axp223 |
| - x-powers,axp313a |
| - x-powers,axp717 |
| - x-powers,axp803 |
| - x-powers,axp806 |
| - x-powers,axp809 |
| - x-powers,axp813 |
| - x-powers,axp15060 |
| - items: |
| - const: x-powers,axp228 |
| - const: x-powers,axp221 |
| - items: |
| - const: x-powers,axp805 |
| - const: x-powers,axp806 |
| - items: |
| - const: x-powers,axp305 |
| - const: x-powers,axp805 |
| - const: x-powers,axp806 |
| - items: |
| - const: x-powers,axp818 |
| - const: x-powers,axp813 |
| |
| reg: |
| maxItems: 1 |
| |
| interrupts: |
| maxItems: 1 |
| |
| interrupt-controller: true |
| |
| "#interrupt-cells": |
| const: 1 |
| |
| x-powers,drive-vbus-en: |
| type: boolean |
| description: > |
| Set this when the N_VBUSEN pin is used as an output pin to control an |
| external regulator to drive the OTG VBus, rather then as an input pin |
| which signals whether the board is driving OTG VBus or not. |
| |
| x-powers,self-working-mode: |
| type: boolean |
| description: > |
| Set this when the PMIC is wired for self-working mode through the MODESET |
| pin. |
| |
| x-powers,master-mode: |
| type: boolean |
| description: > |
| Set this when the PMIC is wired for master mode through the MODESET pin. |
| |
| vin1-supply: |
| description: > |
| DCDC1 power supply node, if present. |
| |
| vin2-supply: |
| description: > |
| DCDC2 power supply node, if present. |
| |
| vin3-supply: |
| description: > |
| DCDC3 power supply node, if present. |
| |
| vin4-supply: |
| description: > |
| DCDC4 power supply node, if present. |
| |
| vin5-supply: |
| description: > |
| DCDC5 power supply node, if present. |
| |
| vin6-supply: |
| description: > |
| DCDC6 power supply node, if present. |
| |
| vin7-supply: |
| description: > |
| DCDC7 power supply node, if present. |
| |
| vina-supply: |
| description: > |
| DCDCA power supply node, if present. |
| |
| vinb-supply: |
| description: > |
| DCDCB power supply node, if present. |
| |
| vinc-supply: |
| description: > |
| DCDCC power supply node, if present. |
| |
| vind-supply: |
| description: > |
| DCDCD power supply node, if present. |
| |
| vine-supply: |
| description: > |
| DCDCE power supply node, if present. |
| |
| acin-supply: |
| description: > |
| LDO1 power supply node, if present. |
| |
| ldo24in-supply: |
| description: > |
| LDO2 and LDO4 power supply node, if present. |
| |
| ldo3in-supply: |
| description: > |
| LDO3 power supply node, if present. |
| |
| ldo5in-supply: |
| description: > |
| LDO5 power supply node, if present. |
| |
| aldoin-supply: |
| description: > |
| ALDO* power supply node, if present. |
| |
| bldoin-supply: |
| description: > |
| BLDO* power supply node, if present. |
| |
| cldoin-supply: |
| description: > |
| CLDO* power supply node, if present. |
| |
| dldoin-supply: |
| description: > |
| DLDO* power supply node, if present. |
| |
| eldoin-supply: |
| description: > |
| ELDO* power supply node, if present. |
| |
| fldoin-supply: |
| description: > |
| FLDO* power supply node, if present. |
| |
| ips-supply: |
| description: > |
| LDO_IO0, LDO_IO1 and RTC_LDO power supply node, if present. |
| |
| drivevbus-supply: |
| description: > |
| DRIVEVBUS power supply node, if present. |
| |
| swin-supply: |
| description: > |
| SW power supply node, if present. |
| |
| adc: |
| $ref: /schemas/iio/adc/x-powers,axp209-adc.yaml# |
| |
| gpio: |
| $ref: /schemas/gpio/x-powers,axp209-gpio.yaml# |
| |
| ac-power: |
| $ref: /schemas/power/supply/x-powers,axp20x-ac-power-supply.yaml# |
| |
| battery-power: |
| $ref: /schemas/power/supply/x-powers,axp20x-battery-power-supply.yaml# |
| |
| usb-power: |
| $ref: /schemas/power/supply/x-powers,axp20x-usb-power-supply.yaml# |
| |
| regulators: |
| type: object |
| |
| properties: |
| x-powers,dcdc-freq: |
| $ref: /schemas/types.yaml#/definitions/uint32 |
| description: > |
| Defines the work frequency of DC-DC in kHz. |
| |
| patternProperties: |
| "^(([a-f])?ldo[0-9]|dcdc[0-7a-e]|ldo(_|-)io(0|1)|(dc1)?sw|rtc(_|-)ldo|cpusldo|drivevbus|dc5ldo|boost)$": |
| $ref: /schemas/regulator/regulator.yaml# |
| type: object |
| unevaluatedProperties: false |
| |
| properties: |
| regulator-ramp-delay: |
| description: > |
| Only 800 and 1600 are valid for the DCDC2 and LDO3 regulators on |
| the AXP209. |
| |
| regulator-soft-start: |
| description: > |
| Only valid for the LDO3 regulator. |
| |
| x-powers,dcdc-workmode: |
| $ref: /schemas/types.yaml#/definitions/uint32 |
| enum: [0, 1] |
| description: > |
| Only valid for DCDC regulators. Setup 1 for PWM mode, 0 |
| for AUTO (PWM/PFM) mode. The DCDC regulators work in a |
| mixed PWM/PFM mode, using PFM under light loads and |
| switching to PWM for heavier loads. Forcing PWM mode |
| trades efficiency under light loads for lower output |
| noise. This probably makes sense for HiFi audio related |
| applications that aren't battery constrained. |
| |
| additionalProperties: false |
| |
| required: |
| - compatible |
| - reg |
| - "#interrupt-cells" |
| - interrupt-controller |
| |
| additionalProperties: false |
| |
| examples: |
| - | |
| i2c { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| pmic@30 { |
| compatible = "x-powers,axp152"; |
| reg = <0x30>; |
| interrupts = <0>; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| }; |
| }; |
| |
| - | |
| #include <dt-bindings/interrupt-controller/irq.h> |
| |
| i2c { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| pmic@34 { |
| compatible = "x-powers,axp209"; |
| reg = <0x34>; |
| interrupt-parent = <&nmi_intc>; |
| interrupts = <0 IRQ_TYPE_LEVEL_LOW>; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| |
| ac_power_supply: ac-power { |
| compatible = "x-powers,axp202-ac-power-supply"; |
| }; |
| |
| axp_adc: adc { |
| compatible = "x-powers,axp209-adc"; |
| #io-channel-cells = <1>; |
| }; |
| |
| axp_gpio: gpio { |
| compatible = "x-powers,axp209-gpio"; |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| gpio0-adc-pin { |
| pins = "GPIO0"; |
| function = "adc"; |
| }; |
| }; |
| |
| battery_power_supply: battery-power { |
| compatible = "x-powers,axp209-battery-power-supply"; |
| }; |
| |
| regulators { |
| /* Default work frequency for buck regulators */ |
| x-powers,dcdc-freq = <1500>; |
| |
| reg_dcdc2: dcdc2 { |
| regulator-always-on; |
| regulator-min-microvolt = <1000000>; |
| regulator-max-microvolt = <1450000>; |
| regulator-name = "vdd-cpu"; |
| }; |
| |
| reg_dcdc3: dcdc3 { |
| regulator-always-on; |
| regulator-min-microvolt = <1000000>; |
| regulator-max-microvolt = <1400000>; |
| regulator-name = "vdd-int-dll"; |
| }; |
| |
| reg_ldo1: ldo1 { |
| /* LDO1 is a fixed output regulator */ |
| regulator-always-on; |
| regulator-min-microvolt = <1300000>; |
| regulator-max-microvolt = <1300000>; |
| regulator-name = "vdd-rtc"; |
| }; |
| |
| reg_ldo2: ldo2 { |
| regulator-always-on; |
| regulator-min-microvolt = <3000000>; |
| regulator-max-microvolt = <3000000>; |
| regulator-name = "avcc"; |
| }; |
| |
| reg_ldo3: ldo3 { |
| regulator-name = "ldo3"; |
| }; |
| |
| reg_ldo4: ldo4 { |
| regulator-name = "ldo4"; |
| }; |
| |
| reg_ldo5: ldo5 { |
| regulator-name = "ldo5"; |
| }; |
| }; |
| |
| usb_power_supply: usb-power { |
| compatible = "x-powers,axp202-usb-power-supply"; |
| }; |
| }; |
| }; |
