| * Microsemi MIPS CPUs |
| |
| Boards with a SoC of the Microsemi MIPS family shall have the following |
| properties: |
| |
| Required properties: |
| - compatible: "mscc,ocelot", "mscc,luton", "mscc,serval" or "mscc,jr2" |
| |
| |
| * Other peripherals: |
| |
| o CPU chip regs: |
| |
| The SoC has a few registers (DEVCPU_GCB:CHIP_REGS) handling miscellaneous |
| functionalities: chip ID, general purpose register for software use, reset |
| controller, hardware status and configuration, efuses. |
| |
| Required properties: |
| - compatible: Should be "mscc,ocelot-chip-regs", "simple-mfd", "syscon" |
| - reg : Should contain registers location and length |
| |
| Example: |
| syscon@71070000 { |
| compatible = "mscc,ocelot-chip-regs", "simple-mfd", "syscon"; |
| reg = <0x71070000 0x1c>; |
| }; |
| |
| o HSIO regs: |
| |
| The SoC has a few registers (HSIO) handling miscellaneous functionalities: |
| configuration and status of PLL5, RCOMP, SyncE, SerDes configurations and |
| status, SerDes muxing and a thermal sensor. |
| |
| Required properties: |
| - compatible: Should be "mscc,ocelot-hsio", "syscon", "simple-mfd" |
| - reg : Should contain registers location and length |
| |
| Example: |
| syscon@10d0000 { |
| compatible = "mscc,ocelot-hsio", "syscon", "simple-mfd"; |
| reg = <0x10d0000 0x10000>; |
| }; |