| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/net/wireless/qcom,ath10k.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: Qualcomm Technologies ath10k wireless devices |
| |
| maintainers: |
| - Kalle Valo <kvalo@kernel.org> |
| - Jeff Johnson <jjohnson@kernel.org> |
| |
| description: |
| Qualcomm Technologies, Inc. IEEE 802.11ac devices. |
| |
| properties: |
| compatible: |
| enum: |
| - qcom,ath10k # SDIO-based devices |
| - qcom,ipq4019-wifi |
| - qcom,wcn3990-wifi # SNoC-based devices |
| |
| reg: |
| maxItems: 1 |
| |
| reg-names: |
| items: |
| - const: membase |
| |
| interrupts: |
| minItems: 12 |
| maxItems: 17 |
| |
| interrupt-names: |
| minItems: 12 |
| maxItems: 17 |
| |
| memory-region: |
| maxItems: 1 |
| description: |
| Reference to the MSA memory region used by the Wi-Fi firmware |
| running on the Q6 core. |
| |
| iommus: |
| minItems: 1 |
| maxItems: 2 |
| |
| clocks: |
| minItems: 1 |
| maxItems: 3 |
| |
| clock-names: |
| minItems: 1 |
| maxItems: 3 |
| |
| resets: |
| maxItems: 6 |
| |
| reset-names: |
| items: |
| - const: wifi_cpu_init |
| - const: wifi_radio_srif |
| - const: wifi_radio_warm |
| - const: wifi_radio_cold |
| - const: wifi_core_warm |
| - const: wifi_core_cold |
| |
| ext-fem-name: |
| $ref: /schemas/types.yaml#/definitions/string |
| description: Name of external front end module used. |
| enum: |
| - microsemi-lx5586 |
| - sky85703-11 |
| - sky85803 |
| |
| firmware-name: |
| maxItems: 1 |
| description: |
| If present, a board or platform specific string used to lookup firmware |
| files for the device. |
| |
| wifi-firmware: |
| type: object |
| additionalProperties: false |
| description: | |
| The ath10k Wi-Fi node can contain one optional firmware subnode. |
| Firmware subnode is needed when the platform does not have Trustzone. |
| properties: |
| iommus: |
| maxItems: 1 |
| required: |
| - iommus |
| |
| ieee80211-freq-limit: true |
| |
| qcom,ath10k-calibration-data: |
| $ref: /schemas/types.yaml#/definitions/uint8-array |
| description: |
| Calibration data + board-specific data as a byte array. The length |
| can vary between hardware versions. |
| |
| qcom,ath10k-calibration-variant: |
| $ref: /schemas/types.yaml#/definitions/string |
| description: |
| Unique variant identifier of the calibration data in board-2.bin |
| for designs with colliding bus and device specific ids |
| |
| qcom,ath10k-pre-calibration-data: |
| $ref: /schemas/types.yaml#/definitions/uint8-array |
| description: |
| Pre-calibration data as a byte array. The length can vary between |
| hardware versions. |
| |
| qcom,coexist-support: |
| $ref: /schemas/types.yaml#/definitions/uint8 |
| enum: [0, 1] |
| description: |
| Indicate coex support by the hardware. |
| |
| qcom,coexist-gpio-pin: |
| $ref: /schemas/types.yaml#/definitions/uint32 |
| description: |
| COEX GPIO number provided to the Wi-Fi firmware. |
| |
| qcom,msa-fixed-perm: |
| type: boolean |
| description: |
| Whether to skip executing an SCM call that reassigns the memory |
| region ownership. |
| |
| qcom,no-msa-ready-indicator: |
| type: boolean |
| description: |
| Don't wait for MSA_READY indicator to complete init. |
| |
| qcom,smem-states: |
| $ref: /schemas/types.yaml#/definitions/phandle-array |
| description: State bits used by the AP to signal the WLAN Q6. |
| items: |
| - description: Signal bits used to enable/disable low power mode |
| on WCN in the case of WoW (Wake on Wireless). |
| |
| qcom,smem-state-names: |
| description: The names of the state bits used for SMP2P output. |
| items: |
| - const: wlan-smp2p-out |
| |
| qcom,snoc-host-cap-8bit-quirk: |
| type: boolean |
| description: |
| Quirk specifying that the firmware expects the 8bit version |
| of the host capability QMI request |
| |
| qcom,xo-cal-data: |
| $ref: /schemas/types.yaml#/definitions/uint32 |
| description: |
| XO cal offset to be configured in XO trim register. |
| |
| vdd-0.8-cx-mx-supply: |
| description: Main logic power rail |
| |
| vdd-1.8-xo-supply: |
| description: Crystal oscillator supply |
| |
| vdd-1.3-rfa-supply: |
| description: RFA supply |
| |
| vdd-3.3-ch0-supply: |
| description: Primary Wi-Fi antenna supply |
| |
| vdd-3.3-ch1-supply: |
| description: Secondary Wi-Fi antenna supply |
| |
| required: |
| - compatible |
| - reg |
| |
| additionalProperties: false |
| |
| allOf: |
| - $ref: ieee80211.yaml# |
| - if: |
| properties: |
| compatible: |
| contains: |
| enum: |
| - qcom,ipq4019-wifi |
| then: |
| properties: |
| interrupts: |
| minItems: 17 |
| maxItems: 17 |
| |
| interrupt-names: |
| items: |
| - const: msi0 |
| - const: msi1 |
| - const: msi2 |
| - const: msi3 |
| - const: msi4 |
| - const: msi5 |
| - const: msi6 |
| - const: msi7 |
| - const: msi8 |
| - const: msi9 |
| - const: msi10 |
| - const: msi11 |
| - const: msi12 |
| - const: msi13 |
| - const: msi14 |
| - const: msi15 |
| - const: legacy |
| |
| clocks: |
| items: |
| - description: Wi-Fi command clock |
| - description: Wi-Fi reference clock |
| - description: Wi-Fi RTC clock |
| |
| clock-names: |
| items: |
| - const: wifi_wcss_cmd |
| - const: wifi_wcss_ref |
| - const: wifi_wcss_rtc |
| |
| required: |
| - clocks |
| - clock-names |
| - interrupts |
| - interrupt-names |
| - resets |
| - reset-names |
| |
| - if: |
| properties: |
| compatible: |
| contains: |
| enum: |
| - qcom,wcn3990-wifi |
| |
| then: |
| properties: |
| clocks: |
| minItems: 1 |
| items: |
| - description: XO reference clock |
| - description: Qualcomm Debug Subsystem clock |
| |
| clock-names: |
| minItems: 1 |
| items: |
| - const: cxo_ref_clk_pin |
| - const: qdss |
| |
| interrupts: |
| items: |
| - description: CE0 |
| - description: CE1 |
| - description: CE2 |
| - description: CE3 |
| - description: CE4 |
| - description: CE5 |
| - description: CE6 |
| - description: CE7 |
| - description: CE8 |
| - description: CE9 |
| - description: CE10 |
| - description: CE11 |
| |
| interrupt-names: false |
| |
| required: |
| - interrupts |
| |
| examples: |
| # SNoC |
| - | |
| #include <dt-bindings/clock/qcom,rpmcc.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| |
| wifi@18800000 { |
| compatible = "qcom,wcn3990-wifi"; |
| reg = <0x18800000 0x800000>; |
| reg-names = "membase"; |
| memory-region = <&wlan_msa_mem>; |
| clocks = <&rpmcc RPM_SMD_RF_CLK2_PIN>; |
| clock-names = "cxo_ref_clk_pin"; |
| interrupts = <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>; |
| iommus = <&anoc2_smmu 0x1900>, |
| <&anoc2_smmu 0x1901>; |
| qcom,snoc-host-cap-8bit-quirk; |
| vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; |
| vdd-1.8-xo-supply = <&vreg_l7a_1p8>; |
| vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; |
| vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; |
| vdd-3.3-ch1-supply = <&vreg_l23a_3p3>; |
| |
| wifi-firmware { |
| iommus = <&apps_smmu 0x1c02 0x1>; |
| }; |
| }; |
| |
| # AHB |
| - | |
| #include <dt-bindings/clock/qcom,gcc-ipq4019.h> |
| |
| wifi@a000000 { |
| compatible = "qcom,ipq4019-wifi"; |
| reg = <0xa000000 0x200000>; |
| resets = <&gcc WIFI0_CPU_INIT_RESET>, |
| <&gcc WIFI0_RADIO_SRIF_RESET>, |
| <&gcc WIFI0_RADIO_WARM_RESET>, |
| <&gcc WIFI0_RADIO_COLD_RESET>, |
| <&gcc WIFI0_CORE_WARM_RESET>, |
| <&gcc WIFI0_CORE_COLD_RESET>; |
| reset-names = "wifi_cpu_init", |
| "wifi_radio_srif", |
| "wifi_radio_warm", |
| "wifi_radio_cold", |
| "wifi_core_warm", |
| "wifi_core_cold"; |
| clocks = <&gcc GCC_WCSS2G_CLK>, |
| <&gcc GCC_WCSS2G_REF_CLK>, |
| <&gcc GCC_WCSS2G_RTC_CLK>; |
| clock-names = "wifi_wcss_cmd", |
| "wifi_wcss_ref", |
| "wifi_wcss_rtc"; |
| interrupts = <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 33 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 36 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 37 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 38 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 40 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 41 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 42 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 43 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 44 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 45 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 46 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 47 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "msi0", |
| "msi1", |
| "msi2", |
| "msi3", |
| "msi4", |
| "msi5", |
| "msi6", |
| "msi7", |
| "msi8", |
| "msi9", |
| "msi10", |
| "msi11", |
| "msi12", |
| "msi13", |
| "msi14", |
| "msi15", |
| "legacy"; |
| ieee80211-freq-limit = <5470000 5875000>; |
| }; |
