| # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/sound/qcom,wcd9335.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: Qualcomm WCD9335 Audio Codec |
| |
| maintainers: |
| - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> |
| |
| description: |
| Qualcomm WCD9335 Codec is a standalone Hi-Fi audio codec IC with in-built |
| Soundwire controller and interrupt mux. It supports both I2S/I2C and SLIMbus |
| audio interfaces. |
| |
| properties: |
| compatible: |
| const: slim217,1a0 |
| |
| reg: |
| maxItems: 1 |
| |
| clocks: |
| maxItems: 2 |
| |
| clock-names: |
| items: |
| - const: mclk |
| - const: slimbus |
| |
| interrupts: |
| maxItems: 2 |
| |
| interrupt-names: |
| items: |
| - const: intr1 |
| - const: intr2 |
| |
| interrupt-controller: true |
| |
| '#interrupt-cells': |
| const: 1 |
| |
| reset-gpios: |
| maxItems: 1 |
| |
| slim-ifc-dev: |
| description: SLIM IFC device interface |
| $ref: /schemas/types.yaml#/definitions/phandle |
| |
| '#sound-dai-cells': |
| const: 1 |
| |
| vdd-buck-supply: |
| description: 1.8V buck supply |
| |
| vdd-buck-sido-supply: |
| description: 1.8V SIDO buck supply |
| |
| vdd-io-supply: |
| description: 1.8V I/O supply |
| |
| vdd-micbias-supply: |
| description: micbias supply |
| |
| vdd-rx-supply: |
| description: 1.8V rx supply |
| |
| vdd-tx-supply: |
| description: 1.8V tx supply |
| |
| vdd-vbat-supply: |
| description: vbat supply |
| |
| required: |
| - compatible |
| - reg |
| |
| allOf: |
| - $ref: dai-common.yaml# |
| - if: |
| required: |
| - slim-ifc-dev |
| then: |
| required: |
| - clocks |
| - clock-names |
| - interrupts |
| - interrupt-names |
| - interrupt-controller |
| - '#interrupt-cells' |
| - reset-gpios |
| - slim-ifc-dev |
| - '#sound-dai-cells' |
| - vdd-buck-supply |
| - vdd-buck-sido-supply |
| - vdd-io-supply |
| - vdd-rx-supply |
| - vdd-tx-supply |
| else: |
| properties: |
| clocks: false |
| clock-names: false |
| interrupts: false |
| interrupt-names: false |
| interrupt-controller: false |
| '#interrupt-cells': false |
| reset-gpios: false |
| slim-ifc-dev: false |
| '#sound-dai-cells': false |
| vdd-buck-supply: false |
| vdd-buck-sido-supply: false |
| vdd-io-supply: false |
| vdd-micbias-supply: false |
| vdd-rx-supply: false |
| vdd-tx-supply: false |
| vdd-vbat-supply: false |
| |
| additionalProperties: false |
| |
| examples: |
| - | |
| #include <dt-bindings/clock/qcom,rpmcc.h> |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/interrupt-controller/irq.h> |
| |
| tasha_ifd: codec@0,0 { |
| compatible = "slim217,1a0"; |
| reg = <0 0>; |
| }; |
| |
| codec@1,0 { |
| compatible = "slim217,1a0"; |
| reg = <1 0>; |
| |
| clock-names = "mclk", "slimbus"; |
| clocks = <&div1_mclk>, <&rpmcc RPM_SMD_BB_CLK1>; |
| |
| interrupt-parent = <&tlmm>; |
| interrupts = <54 IRQ_TYPE_LEVEL_HIGH>, |
| <53 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "intr1", "intr2"; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| |
| reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>; |
| slim-ifc-dev = <&tasha_ifd>; |
| #sound-dai-cells = <1>; |
| |
| vdd-buck-supply = <&vreg_s4a_1p8>; |
| vdd-buck-sido-supply = <&vreg_s4a_1p8>; |
| vdd-tx-supply = <&vreg_s4a_1p8>; |
| vdd-rx-supply = <&vreg_s4a_1p8>; |
| vdd-io-supply = <&vreg_s4a_1p8>; |
| }; |