| // SPDX-License-Identifier: (GPL-2.0 OR MIT) |
| /* |
| * Copyright 2017 NXP |
| * Copyright (C) 2017-2018 Pengutronix, Lucas Stach <kernel@pengutronix.de> |
| */ |
| |
| /dts-v1/; |
| |
| #include "imx8mq.dtsi" |
| |
| / { |
| model = "NXP i.MX8MQ EVK"; |
| compatible = "fsl,imx8mq-evk", "fsl,imx8mq"; |
| |
| chosen { |
| stdout-path = &uart1; |
| }; |
| |
| memory@40000000 { |
| device_type = "memory"; |
| reg = <0x00000000 0x40000000 0 0xc0000000>; |
| }; |
| |
| pcie0_refclk: pcie0-refclk { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <100000000>; |
| }; |
| |
| reg_pcie1: regulator-pcie { |
| compatible = "regulator-fixed"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pcie1_reg>; |
| regulator-name = "MPCIE_3V3"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| reg_usdhc2_vmmc: regulator-vsd-3v3 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_reg_usdhc2>; |
| compatible = "regulator-fixed"; |
| regulator-name = "VSD_3V3"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; |
| off-on-delay-us = <20000>; |
| enable-active-high; |
| }; |
| |
| buck2_reg: regulator-buck2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_buck2>; |
| compatible = "regulator-gpio"; |
| regulator-name = "vdd_arm"; |
| regulator-min-microvolt = <900000>; |
| regulator-max-microvolt = <1000000>; |
| gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; |
| states = <1000000 0x0 |
| 900000 0x1>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| ir-receiver { |
| compatible = "gpio-ir-receiver"; |
| gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_ir>; |
| linux,autosuspend-period = <125>; |
| }; |
| |
| audio_codec_bt_sco: audio-codec-bt-sco { |
| compatible = "linux,bt-sco"; |
| #sound-dai-cells = <1>; |
| }; |
| |
| wm8524: audio-codec { |
| #sound-dai-cells = <0>; |
| compatible = "wlf,wm8524"; |
| wlf,mute-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; |
| }; |
| |
| sound-bt-sco { |
| compatible = "simple-audio-card"; |
| simple-audio-card,name = "bt-sco-audio"; |
| simple-audio-card,format = "dsp_a"; |
| simple-audio-card,bitclock-inversion; |
| simple-audio-card,frame-master = <&btcpu>; |
| simple-audio-card,bitclock-master = <&btcpu>; |
| |
| btcpu: simple-audio-card,cpu { |
| sound-dai = <&sai3>; |
| dai-tdm-slot-num = <2>; |
| dai-tdm-slot-width = <16>; |
| }; |
| |
| simple-audio-card,codec { |
| sound-dai = <&audio_codec_bt_sco 1>; |
| }; |
| }; |
| |
| sound-wm8524 { |
| compatible = "simple-audio-card"; |
| simple-audio-card,name = "wm8524-audio"; |
| simple-audio-card,format = "i2s"; |
| simple-audio-card,frame-master = <&cpudai>; |
| simple-audio-card,bitclock-master = <&cpudai>; |
| simple-audio-card,widgets = |
| "Line", "Left Line Out Jack", |
| "Line", "Right Line Out Jack"; |
| simple-audio-card,routing = |
| "Left Line Out Jack", "LINEVOUTL", |
| "Right Line Out Jack", "LINEVOUTR"; |
| |
| cpudai: simple-audio-card,cpu { |
| sound-dai = <&sai2>; |
| }; |
| |
| link_codec: simple-audio-card,codec { |
| sound-dai = <&wm8524>; |
| clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>; |
| }; |
| }; |
| |
| spdif_out: spdif-out { |
| compatible = "linux,spdif-dit"; |
| #sound-dai-cells = <0>; |
| }; |
| |
| spdif_in: spdif-in { |
| compatible = "linux,spdif-dir"; |
| #sound-dai-cells = <0>; |
| }; |
| |
| sound-spdif { |
| compatible = "fsl,imx-audio-spdif"; |
| model = "imx-spdif"; |
| audio-cpu = <&spdif1>; |
| audio-codec = <&spdif_out>, <&spdif_in>; |
| }; |
| |
| hdmi_arc_in: hdmi-arc-in { |
| compatible = "linux,spdif-dir"; |
| #sound-dai-cells = <0>; |
| }; |
| |
| sound-hdmi-arc { |
| compatible = "fsl,imx-audio-spdif"; |
| model = "imx-hdmi-arc"; |
| audio-cpu = <&spdif2>; |
| audio-codec = <&hdmi_arc_in>; |
| }; |
| }; |
| |
| &A53_0 { |
| cpu-supply = <&buck2_reg>; |
| }; |
| |
| &A53_1 { |
| cpu-supply = <&buck2_reg>; |
| }; |
| |
| &A53_2 { |
| cpu-supply = <&buck2_reg>; |
| }; |
| |
| &A53_3 { |
| cpu-supply = <&buck2_reg>; |
| }; |
| |
| &ddrc { |
| operating-points-v2 = <&ddrc_opp_table>; |
| status = "okay"; |
| |
| ddrc_opp_table: opp-table { |
| compatible = "operating-points-v2"; |
| |
| opp-25000000 { |
| opp-hz = /bits/ 64 <25000000>; |
| }; |
| |
| opp-100000000 { |
| opp-hz = /bits/ 64 <100000000>; |
| }; |
| |
| /* |
| * On imx8mq B0 PLL can't be bypassed so low bus is 166M |
| */ |
| opp-166000000 { |
| opp-hz = /bits/ 64 <166935483>; |
| }; |
| |
| opp-800000000 { |
| opp-hz = /bits/ 64 <800000000>; |
| }; |
| }; |
| }; |
| |
| &dphy { |
| status = "okay"; |
| }; |
| |
| &fec1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_fec1>; |
| phy-mode = "rgmii-id"; |
| phy-handle = <ðphy0>; |
| fsl,magic-packet; |
| status = "okay"; |
| |
| mdio { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| ethphy0: ethernet-phy@0 { |
| compatible = "ethernet-phy-ieee802.3-c22"; |
| reg = <0>; |
| reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; |
| reset-assert-us = <10000>; |
| qca,disable-smarteee; |
| vddio-supply = <&vddh>; |
| |
| vddh: vddh-regulator { |
| }; |
| }; |
| }; |
| }; |
| |
| &gpio5 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_wifi_reset>; |
| |
| wl-reg-on-hog { |
| gpio-hog; |
| gpios = <29 GPIO_ACTIVE_HIGH>; |
| output-high; |
| }; |
| }; |
| |
| &i2c1 { |
| clock-frequency = <100000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c1>; |
| status = "okay"; |
| |
| pmic@8 { |
| compatible = "fsl,pfuze100"; |
| reg = <0x8>; |
| |
| regulators { |
| sw1a_reg: sw1ab { |
| regulator-min-microvolt = <825000>; |
| regulator-max-microvolt = <1100000>; |
| }; |
| |
| sw1c_reg: sw1c { |
| regulator-min-microvolt = <825000>; |
| regulator-max-microvolt = <1100000>; |
| }; |
| |
| sw2_reg: sw2 { |
| regulator-min-microvolt = <1100000>; |
| regulator-max-microvolt = <1100000>; |
| regulator-always-on; |
| }; |
| |
| sw3a_reg: sw3ab { |
| regulator-min-microvolt = <825000>; |
| regulator-max-microvolt = <1100000>; |
| regulator-always-on; |
| }; |
| |
| sw4_reg: sw4 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-always-on; |
| }; |
| |
| swbst_reg: swbst { |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5150000>; |
| }; |
| |
| snvs_reg: vsnvs { |
| regulator-min-microvolt = <1000000>; |
| regulator-max-microvolt = <3000000>; |
| regulator-always-on; |
| }; |
| |
| vref_reg: vrefddr { |
| regulator-always-on; |
| }; |
| |
| vgen1_reg: vgen1 { |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <1550000>; |
| }; |
| |
| vgen2_reg: vgen2 { |
| regulator-min-microvolt = <850000>; |
| regulator-max-microvolt = <975000>; |
| regulator-always-on; |
| }; |
| |
| vgen3_reg: vgen3 { |
| regulator-min-microvolt = <1675000>; |
| regulator-max-microvolt = <1975000>; |
| regulator-always-on; |
| }; |
| |
| vgen4_reg: vgen4 { |
| regulator-min-microvolt = <1625000>; |
| regulator-max-microvolt = <1875000>; |
| regulator-always-on; |
| }; |
| |
| vgen5_reg: vgen5 { |
| regulator-min-microvolt = <3075000>; |
| regulator-max-microvolt = <3625000>; |
| regulator-always-on; |
| }; |
| |
| vgen6_reg: vgen6 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| }; |
| }; |
| }; |
| |
| &lcdif { |
| status = "okay"; |
| }; |
| |
| &mipi_dsi { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "okay"; |
| |
| panel@0 { |
| pinctrl-0 = <&pinctrl_mipi_dsi>; |
| pinctrl-names = "default"; |
| compatible = "raydium,rm67191"; |
| reg = <0>; |
| reset-gpios = <&gpio5 6 GPIO_ACTIVE_LOW>; |
| dsi-lanes = <4>; |
| |
| port { |
| panel_in: endpoint { |
| remote-endpoint = <&mipi_dsi_out>; |
| }; |
| }; |
| }; |
| |
| ports { |
| port@1 { |
| reg = <1>; |
| mipi_dsi_out: endpoint { |
| remote-endpoint = <&panel_in>; |
| }; |
| }; |
| }; |
| }; |
| |
| &pcie0 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pcie0>; |
| reset-gpio = <&gpio5 28 GPIO_ACTIVE_LOW>; |
| clocks = <&clk IMX8MQ_CLK_PCIE1_ROOT>, |
| <&pcie0_refclk>, |
| <&clk IMX8MQ_CLK_PCIE1_PHY>, |
| <&clk IMX8MQ_CLK_PCIE1_AUX>; |
| vph-supply = <&vgen5_reg>; |
| status = "okay"; |
| }; |
| |
| &pcie1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pcie1>; |
| reset-gpio = <&gpio5 12 GPIO_ACTIVE_LOW>; |
| clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>, |
| <&pcie0_refclk>, |
| <&clk IMX8MQ_CLK_PCIE2_PHY>, |
| <&clk IMX8MQ_CLK_PCIE2_AUX>; |
| vpcie-supply = <®_pcie1>; |
| vph-supply = <&vgen5_reg>; |
| status = "okay"; |
| }; |
| |
| &pgc_gpu { |
| power-supply = <&sw1a_reg>; |
| }; |
| |
| &pgc_vpu { |
| power-supply = <&sw1c_reg>; |
| }; |
| |
| &qspi0 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_qspi>; |
| status = "okay"; |
| |
| n25q256a: flash@0 { |
| reg = <0>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "micron,n25q256a", "jedec,spi-nor"; |
| spi-max-frequency = <29000000>; |
| spi-tx-bus-width = <1>; |
| spi-rx-bus-width = <4>; |
| }; |
| }; |
| |
| &sai2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_sai2>; |
| assigned-clocks = <&clk IMX8MQ_AUDIO_PLL1_BYPASS>, <&clk IMX8MQ_CLK_SAI2>; |
| assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1>, <&clk IMX8MQ_AUDIO_PLL1_OUT>; |
| assigned-clock-rates = <0>, <24576000>; |
| status = "okay"; |
| }; |
| |
| &sai3 { |
| #sound-dai-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_sai3>; |
| assigned-clocks = <&clk IMX8MQ_CLK_SAI3>; |
| assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>; |
| assigned-clock-rates = <24576000>; |
| status = "okay"; |
| }; |
| |
| &snvs_pwrkey { |
| status = "okay"; |
| }; |
| |
| &spdif1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_spdif1>; |
| assigned-clocks = <&clk IMX8MQ_CLK_SPDIF1>; |
| assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>; |
| assigned-clock-rates = <24576000>; |
| status = "okay"; |
| }; |
| |
| &spdif2 { |
| assigned-clocks = <&clk IMX8MQ_CLK_SPDIF2>; |
| assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>; |
| assigned-clock-rates = <24576000>; |
| status = "okay"; |
| }; |
| |
| &uart1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart1>; |
| status = "okay"; |
| }; |
| |
| &usb3_phy1 { |
| status = "okay"; |
| }; |
| |
| &usb_dwc3_1 { |
| dr_mode = "host"; |
| status = "okay"; |
| }; |
| |
| &usdhc1 { |
| assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>; |
| assigned-clock-rates = <400000000>; |
| pinctrl-names = "default", "state_100mhz", "state_200mhz"; |
| pinctrl-0 = <&pinctrl_usdhc1>; |
| pinctrl-1 = <&pinctrl_usdhc1_100mhz>; |
| pinctrl-2 = <&pinctrl_usdhc1_200mhz>; |
| vqmmc-supply = <&sw4_reg>; |
| bus-width = <8>; |
| non-removable; |
| no-sd; |
| no-sdio; |
| status = "okay"; |
| }; |
| |
| &usdhc2 { |
| assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>; |
| assigned-clock-rates = <200000000>; |
| pinctrl-names = "default", "state_100mhz", "state_200mhz"; |
| pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; |
| pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; |
| pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; |
| cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; |
| vmmc-supply = <®_usdhc2_vmmc>; |
| status = "okay"; |
| }; |
| |
| &wdog1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_wdog>; |
| fsl,ext-reset-output; |
| status = "okay"; |
| }; |
| |
| &iomuxc { |
| pinctrl_buck2: vddarmgrp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x19 |
| >; |
| }; |
| |
| pinctrl_fec1: fec1grp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC 0x3 |
| MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO 0x23 |
| MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f |
| MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f |
| MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f |
| MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f |
| MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 |
| MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 |
| MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 |
| MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 |
| MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f |
| MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 |
| MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 |
| MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f |
| MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x19 |
| >; |
| }; |
| |
| pinctrl_i2c1: i2c1grp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x4000007f |
| MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA 0x4000007f |
| >; |
| }; |
| |
| pinctrl_ir: irgrp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x4f |
| >; |
| }; |
| |
| pinctrl_mipi_dsi: mipidsigrp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_ECSPI1_SCLK_GPIO5_IO6 0x16 |
| >; |
| }; |
| |
| pinctrl_pcie0: pcie0grp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_I2C4_SCL_PCIE1_CLKREQ_B 0x76 |
| MX8MQ_IOMUXC_UART4_RXD_GPIO5_IO28 0x16 |
| >; |
| }; |
| |
| pinctrl_pcie1: pcie1grp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_I2C4_SDA_PCIE2_CLKREQ_B 0x76 |
| MX8MQ_IOMUXC_ECSPI2_MISO_GPIO5_IO12 0x16 |
| >; |
| }; |
| |
| pinctrl_pcie1_reg: pcie1reggrp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_ECSPI2_SCLK_GPIO5_IO10 0x16 |
| >; |
| }; |
| |
| pinctrl_qspi: qspigrp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x82 |
| MX8MQ_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B 0x82 |
| MX8MQ_IOMUXC_NAND_DATA00_QSPI_A_DATA0 0x82 |
| MX8MQ_IOMUXC_NAND_DATA01_QSPI_A_DATA1 0x82 |
| MX8MQ_IOMUXC_NAND_DATA02_QSPI_A_DATA2 0x82 |
| MX8MQ_IOMUXC_NAND_DATA03_QSPI_A_DATA3 0x82 |
| >; |
| }; |
| |
| pinctrl_reg_usdhc2: regusdhc2gpiogrp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41 |
| >; |
| }; |
| |
| pinctrl_sai2: sai2grp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC 0xd6 |
| MX8MQ_IOMUXC_SAI2_TXC_SAI2_TX_BCLK 0xd6 |
| MX8MQ_IOMUXC_SAI2_MCLK_SAI2_MCLK 0xd6 |
| MX8MQ_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0 0xd6 |
| MX8MQ_IOMUXC_GPIO1_IO08_GPIO1_IO8 0xd6 |
| >; |
| }; |
| |
| pinctrl_sai3: sai3grp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6 |
| MX8MQ_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0xd6 |
| MX8MQ_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0xd6 |
| MX8MQ_IOMUXC_SAI3_RXD_SAI3_RX_DATA0 0xd6 |
| >; |
| }; |
| |
| pinctrl_spdif1: spdif1grp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_SPDIF_TX_SPDIF1_OUT 0xd6 |
| MX8MQ_IOMUXC_SPDIF_RX_SPDIF1_IN 0xd6 |
| >; |
| }; |
| |
| pinctrl_uart1: uart1grp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX 0x49 |
| MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX 0x49 |
| >; |
| }; |
| |
| pinctrl_usdhc1: usdhc1grp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x83 |
| MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc3 |
| MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc3 |
| MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc3 |
| MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc3 |
| MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc3 |
| MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc3 |
| MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc3 |
| MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc3 |
| MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc3 |
| MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x83 |
| MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1 |
| >; |
| }; |
| |
| pinctrl_usdhc1_100mhz: usdhc1-100grp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x8d |
| MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xcd |
| MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xcd |
| MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xcd |
| MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xcd |
| MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xcd |
| MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xcd |
| MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xcd |
| MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xcd |
| MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xcd |
| MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x8d |
| MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1 |
| >; |
| }; |
| |
| pinctrl_usdhc1_200mhz: usdhc1-200grp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x9f |
| MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xdf |
| MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xdf |
| MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xdf |
| MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xdf |
| MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xdf |
| MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xdf |
| MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xdf |
| MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xdf |
| MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xdf |
| MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x9f |
| MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1 |
| >; |
| }; |
| |
| pinctrl_usdhc2_gpio: usdhc2gpiogrp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12 0x41 |
| >; |
| }; |
| |
| pinctrl_usdhc2: usdhc2grp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x83 |
| MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc3 |
| MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc3 |
| MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc3 |
| MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc3 |
| MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc3 |
| MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1 |
| >; |
| }; |
| |
| pinctrl_usdhc2_100mhz: usdhc2-100grp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x85 |
| MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc5 |
| MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc5 |
| MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc5 |
| MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc5 |
| MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc5 |
| MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1 |
| >; |
| }; |
| |
| pinctrl_usdhc2_200mhz: usdhc2-200grp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x87 |
| MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc7 |
| MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc7 |
| MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc7 |
| MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc7 |
| MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc7 |
| MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1 |
| >; |
| }; |
| |
| pinctrl_wdog: wdog1grp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 |
| >; |
| }; |
| |
| pinctrl_wifi_reset: wifiresetgrp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_UART4_TXD_GPIO5_IO29 0x16 |
| >; |
| }; |
| }; |
