| // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| /* |
| * Copyright (C) 2016 Marvell Technology Group Ltd. |
| * Copyright (C) 2020 Sartura Ltd. |
| * |
| * Device Tree file for IEI Puzzle-M801 |
| */ |
| |
| #include "armada-8040.dtsi" |
| |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/leds/common.h> |
| |
| / { |
| model = "IEI-Puzzle-M801"; |
| compatible = "marvell,armada8040", "marvell,armada-ap806-quad", "marvell,armada-ap806"; |
| |
| aliases { |
| ethernet0 = &cp0_eth0; |
| ethernet1 = &cp1_eth0; |
| ethernet2 = &cp0_eth1; |
| ethernet3 = &cp0_eth2; |
| ethernet4 = &cp1_eth1; |
| ethernet5 = &cp1_eth2; |
| }; |
| |
| chosen { |
| stdout-path = "serial0:115200n8"; |
| }; |
| |
| memory@0 { |
| device_type = "memory"; |
| reg = <0x0 0x0 0x0 0x80000000>; |
| }; |
| |
| /* Regulator labels correspond with schematics */ |
| v_3_3: regulator-3-3v { |
| compatible = "regulator-fixed"; |
| regulator-name = "v_3_3"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| status = "okay"; |
| }; |
| |
| v_5v0_usb3_hst_vbus: regulator-usb3-vbus0 { |
| compatible = "regulator-fixed"; |
| enable-active-high; |
| gpio = <&cp0_gpio2 15 GPIO_ACTIVE_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&cp0_xhci_vbus_pins>; |
| regulator-name = "v_5v0_usb3_hst_vbus"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| status = "okay"; |
| }; |
| |
| v_vddo_h: regulator-1-8v { |
| compatible = "regulator-fixed"; |
| regulator-name = "v_vddo_h"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-always-on; |
| status = "okay"; |
| }; |
| |
| sfp_cp0_eth0: sfp-cp0-eth0 { |
| compatible = "sff,sfp"; |
| i2c-bus = <&sfpplus0_i2c>; |
| los-gpios = <&sfpplus_gpio 11 GPIO_ACTIVE_HIGH>; |
| mod-def0-gpios = <&sfpplus_gpio 10 GPIO_ACTIVE_LOW>; |
| tx-disable-gpios = <&sfpplus_gpio 9 GPIO_ACTIVE_HIGH>; |
| tx-fault-gpios = <&sfpplus_gpio 8 GPIO_ACTIVE_HIGH>; |
| maximum-power-milliwatt = <3000>; |
| }; |
| |
| sfp_cp1_eth0: sfp-cp1-eth0 { |
| compatible = "sff,sfp"; |
| i2c-bus = <&sfpplus1_i2c>; |
| los-gpios = <&sfpplus_gpio 3 GPIO_ACTIVE_HIGH>; |
| mod-def0-gpios = <&sfpplus_gpio 2 GPIO_ACTIVE_LOW>; |
| tx-disable-gpios = <&sfpplus_gpio 1 GPIO_ACTIVE_HIGH>; |
| tx-fault-gpios = <&sfpplus_gpio 0 GPIO_ACTIVE_HIGH>; |
| maximum-power-milliwatt = <3000>; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| status = "okay"; |
| pinctrl-0 = <&cp0_sfpplus_led_pins &cp1_sfpplus_led_pins>; |
| pinctrl-names = "default"; |
| |
| led-0 { |
| /* SFP+ port 2: Activity */ |
| function = LED_FUNCTION_LAN; |
| function-enumerator = <0>; |
| gpios = <&cp1_gpio1 6 GPIO_ACTIVE_LOW>; |
| }; |
| |
| led-1 { |
| /* SFP+ port 1: Activity */ |
| function = LED_FUNCTION_LAN; |
| function-enumerator = <1>; |
| gpios = <&cp1_gpio1 14 GPIO_ACTIVE_LOW>; |
| }; |
| |
| led-2 { |
| /* SFP+ port 2: 10 Gbps indicator */ |
| function = LED_FUNCTION_LAN; |
| function-enumerator = <2>; |
| gpios = <&cp1_gpio1 7 GPIO_ACTIVE_LOW>; |
| }; |
| |
| led-3 { |
| /* SFP+ port 2: 1 Gbps indicator */ |
| function = LED_FUNCTION_LAN; |
| function-enumerator = <3>; |
| gpios = <&cp1_gpio1 8 GPIO_ACTIVE_LOW>; |
| }; |
| |
| led-4 { |
| /* SFP+ port 1: 10 Gbps indicator */ |
| function = LED_FUNCTION_LAN; |
| function-enumerator = <4>; |
| gpios = <&cp1_gpio1 10 GPIO_ACTIVE_LOW>; |
| }; |
| |
| led-5 { |
| /* SFP+ port 1: 1 Gbps indicator */ |
| function = LED_FUNCTION_LAN; |
| function-enumerator = <5>; |
| gpios = <&cp1_gpio1 31 GPIO_ACTIVE_LOW>; |
| }; |
| |
| led-6 { |
| function = LED_FUNCTION_DISK; |
| linux,default-trigger = "disk-activity"; |
| gpios = <&cp0_gpio2 22 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| }; |
| }; |
| |
| &ap_sdhci0 { |
| bus-width = <8>; |
| /* |
| * Not stable in HS modes - phy needs "more calibration", so add |
| * the "slow-mode" and disable SDR104, SDR50 and DDR50 modes. |
| */ |
| marvell,xenon-phy-slow-mode; |
| no-1-8-v; |
| no-sd; |
| no-sdio; |
| non-removable; |
| status = "okay"; |
| vqmmc-supply = <&v_vddo_h>; |
| }; |
| |
| &ap_thermal_cpu1 { |
| trips { |
| cpu_active: cpu-active { |
| temperature = <44000>; |
| hysteresis = <2000>; |
| type = "active"; |
| }; |
| }; |
| cooling-maps { |
| fan-map { |
| trip = <&cpu_active>; |
| cooling-device = <&chassis_fan_group0 64 THERMAL_NO_LIMIT>, |
| <&chassis_fan_group1 64 THERMAL_NO_LIMIT>; |
| }; |
| }; |
| }; |
| |
| &i2c0 { |
| clock-frequency = <100000>; |
| status = "okay"; |
| |
| rtc@32 { |
| compatible = "epson,rx8010"; |
| reg = <0x32>; |
| }; |
| }; |
| |
| &spi0 { |
| status = "okay"; |
| flash@0 { |
| #address-cells = <0x1>; |
| #size-cells = <0x1>; |
| compatible = "jedec,spi-nor"; |
| reg = <0x0>; |
| spi-max-frequency = <20000000>; |
| partition@u-boot { |
| label = "u-boot"; |
| reg = <0x00000000 0x001f0000>; |
| }; |
| partition@u-boot-env { |
| label = "u-boot-env"; |
| reg = <0x001f0000 0x00010000>; |
| }; |
| partition@ubi1 { |
| label = "ubi1"; |
| reg = <0x00200000 0x03f00000>; |
| }; |
| partition@ubi2 { |
| label = "ubi2"; |
| reg = <0x04100000 0x03f00000>; |
| }; |
| }; |
| }; |
| |
| &uart0 { |
| status = "okay"; |
| pinctrl-0 = <&uart0_pins>; |
| pinctrl-names = "default"; |
| }; |
| |
| &uart1 { |
| status = "okay"; |
| /* IEI WT61P803 PUZZLE MCU Controller */ |
| mcu { |
| compatible = "iei,wt61p803-puzzle"; |
| current-speed = <115200>; |
| enable-beep; |
| |
| leds { |
| compatible = "iei,wt61p803-puzzle-leds"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| led@0 { |
| reg = <0>; |
| function = LED_FUNCTION_POWER; |
| color = <LED_COLOR_ID_BLUE>; |
| }; |
| }; |
| |
| hwmon { |
| compatible = "iei,wt61p803-puzzle-hwmon"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| chassis_fan_group0:fan-group@0 { |
| #cooling-cells = <2>; |
| reg = <0x00>; |
| cooling-levels = <64 102 170 230 250>; |
| }; |
| |
| chassis_fan_group1:fan-group@1 { |
| #cooling-cells = <2>; |
| reg = <0x01>; |
| cooling-levels = <64 102 170 230 250>; |
| }; |
| }; |
| }; |
| }; |
| |
| &cp0_rtc { |
| status = "disabled"; |
| }; |
| |
| &cp0_i2c0 { |
| clock-frequency = <100000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&cp0_i2c0_pins>; |
| status = "okay"; |
| |
| sfpplus_gpio: gpio@21 { |
| compatible = "nxp,pca9555"; |
| reg = <0x21>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| |
| eeprom@54 { |
| compatible = "atmel,24c04"; |
| reg = <0x54>; |
| }; |
| }; |
| |
| &cp0_i2c1 { |
| clock-frequency = <100000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&cp0_i2c1_pins>; |
| status = "okay"; |
| |
| i2c-mux@70 { |
| compatible = "nxp,pca9544"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x70>; |
| |
| sfpplus0_i2c: i2c@0 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0>; |
| }; |
| |
| sfpplus1_i2c: i2c@1 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <1>; |
| }; |
| }; |
| }; |
| |
| &cp0_uart1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&cp0_uart1_pins>; |
| status = "okay"; |
| }; |
| |
| &cp0_mdio { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "okay"; |
| |
| ge_phy2: ethernet-phy@0 { |
| reg = <0>; |
| }; |
| |
| ge_phy3: ethernet-phy@1 { |
| reg = <1>; |
| }; |
| }; |
| |
| &cp0_pcie0 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&cp0_pcie_pins>; |
| num-lanes = <1>; |
| num-viewport = <8>; |
| reset-gpios = <&cp0_gpio2 20 GPIO_ACTIVE_LOW>; |
| ranges = <0x82000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x20000000>; |
| phys = <&cp0_comphy0 0>; |
| phy-names = "cp0-pcie0-x1-phy"; |
| status = "okay"; |
| }; |
| |
| &cp0_pinctrl { |
| cp0_ge_mdio_pins: ge-mdio-pins { |
| marvell,pins = "mpp32", "mpp34"; |
| marvell,function = "ge"; |
| }; |
| cp0_i2c1_pins: i2c1-pins { |
| marvell,pins = "mpp35", "mpp36"; |
| marvell,function = "i2c1"; |
| }; |
| cp0_i2c0_pins: i2c0-pins { |
| marvell,pins = "mpp37", "mpp38"; |
| marvell,function = "i2c0"; |
| }; |
| cp0_uart1_pins: uart1-pins { |
| marvell,pins = "mpp40", "mpp41"; |
| marvell,function = "uart1"; |
| }; |
| cp0_xhci_vbus_pins: xhci0-vbus-pins { |
| marvell,pins = "mpp47"; |
| marvell,function = "gpio"; |
| }; |
| cp0_pcie_pins: pcie-pins { |
| marvell,pins = "mpp52"; |
| marvell,function = "gpio"; |
| }; |
| cp0_sdhci_pins: sdhci-pins { |
| marvell,pins = "mpp55", "mpp56", "mpp57", "mpp58", "mpp59", |
| "mpp60", "mpp61"; |
| marvell,function = "sdio"; |
| }; |
| cp0_sfpplus_led_pins: sfpplus-led-pins { |
| marvell,pins = "mpp54"; |
| marvell,function = "gpio"; |
| }; |
| }; |
| |
| &cp0_ethernet { |
| status = "okay"; |
| }; |
| |
| &cp0_eth0 { |
| status = "okay"; |
| phy-mode = "10gbase-r"; |
| phys = <&cp0_comphy4 0>; |
| local-mac-address = [ae 00 00 00 ff 00]; |
| sfp = <&sfp_cp0_eth0>; |
| managed = "in-band-status"; |
| }; |
| |
| &cp0_eth1 { |
| status = "okay"; |
| phy = <&ge_phy2>; |
| phy-mode = "sgmii"; |
| local-mac-address = [ae 00 00 00 ff 01]; |
| phys = <&cp0_comphy3 1>; |
| }; |
| |
| &cp0_eth2 { |
| status = "okay"; |
| phy-mode = "sgmii"; |
| phys = <&cp0_comphy1 2>; |
| local-mac-address = [ae 00 00 00 ff 02]; |
| phy = <&ge_phy3>; |
| }; |
| |
| &cp0_sata0 { |
| status = "okay"; |
| |
| sata-port@0 { |
| phys = <&cp0_comphy2 0>; |
| phy-names = "cp0-sata0-0-phy"; |
| }; |
| |
| sata-port@1 { |
| phys = <&cp0_comphy5 1>; |
| phy-names = "cp0-sata0-1-phy"; |
| }; |
| }; |
| |
| &cp0_sdhci0 { |
| broken-cd; |
| bus-width = <4>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&cp0_sdhci_pins>; |
| status = "okay"; |
| vqmmc-supply = <&v_3_3>; |
| }; |
| |
| &cp0_usb3_0 { |
| status = "okay"; |
| }; |
| |
| &cp0_usb3_1 { |
| status = "okay"; |
| }; |
| |
| &cp1_i2c0 { |
| clock-frequency = <100000>; |
| status = "disabled"; |
| }; |
| |
| &cp1_i2c1 { |
| clock-frequency = <100000>; |
| status = "disabled"; |
| }; |
| |
| &cp1_rtc { |
| status = "disabled"; |
| }; |
| |
| &cp1_ethernet { |
| status = "okay"; |
| }; |
| |
| &cp1_eth0 { |
| status = "okay"; |
| phy-mode = "10gbase-r"; |
| phys = <&cp1_comphy4 0>; |
| local-mac-address = [ae 00 00 00 ff 03]; |
| sfp = <&sfp_cp1_eth0>; |
| managed = "in-band-status"; |
| }; |
| |
| &cp1_eth1 { |
| status = "okay"; |
| phy = <&ge_phy4>; |
| phy-mode = "sgmii"; |
| local-mac-address = [ae 00 00 00 ff 04]; |
| phys = <&cp1_comphy3 1>; |
| }; |
| |
| &cp1_eth2 { |
| status = "okay"; |
| phy-mode = "sgmii"; |
| local-mac-address = [ae 00 00 00 ff 05]; |
| phys = <&cp1_comphy5 2>; |
| phy = <&ge_phy5>; |
| }; |
| |
| &cp1_pinctrl { |
| cp1_sfpplus_led_pins: sfpplus-led-pins { |
| marvell,pins = "mpp6", "mpp7", "mpp8", "mpp10", "mpp14", "mpp31"; |
| marvell,function = "gpio"; |
| }; |
| }; |
| |
| &cp1_uart0 { |
| status = "disabled"; |
| }; |
| |
| &cp1_comphy2 { |
| cp1_usbh0_con: connector { |
| compatible = "usb-a-connector"; |
| phy-supply = <&v_5v0_usb3_hst_vbus>; |
| }; |
| }; |
| |
| &cp1_usb3_0 { |
| phys = <&cp1_comphy2 0>; |
| phy-names = "cp1-usb3h0-comphy"; |
| status = "okay"; |
| }; |
| |
| &cp1_mdio { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "okay"; |
| |
| ge_phy4: ethernet-phy@1 { |
| reg = <1>; |
| }; |
| ge_phy5: ethernet-phy@0 { |
| reg = <0>; |
| }; |
| }; |
| |
| &cp1_pcie0 { |
| num-lanes = <2>; |
| phys = <&cp1_comphy0 0>, <&cp1_comphy1 0>; |
| phy-names = "cp1-pcie0-x2-lane0-phy", "cp1-pcie0-x2-lane1-phy"; |
| status = "okay"; |
| }; |
