| /***********************license start*************** |
| * Author: Cavium Networks |
| * |
| * Contact: support@caviumnetworks.com |
| * This file is part of the OCTEON SDK |
| * |
| * Copyright (c) 2003-2008 Cavium Networks |
| * |
| * This file is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License, Version 2, as |
| * published by the Free Software Foundation. |
| * |
| * This file is distributed in the hope that it will be useful, but |
| * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty |
| * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or |
| * NONINFRINGEMENT. See the GNU General Public License for more |
| * details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this file; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| * or visit http://www.gnu.org/licenses/. |
| * |
| * This file may also be available under a different license from Cavium. |
| * Contact Cavium Networks for more information |
| ***********************license end**************************************/ |
| |
| /** |
| * @file |
| * |
| * Interface to the hardware Free Pool Allocator. |
| * |
| * |
| */ |
| |
| #ifndef __CVMX_FPA_H__ |
| #define __CVMX_FPA_H__ |
| |
| #include <linux/delay.h> |
| |
| #include <asm/octeon/cvmx-address.h> |
| #include <asm/octeon/cvmx-fpa-defs.h> |
| |
| #define CVMX_FPA_NUM_POOLS 8 |
| #define CVMX_FPA_MIN_BLOCK_SIZE 128 |
| #define CVMX_FPA_ALIGNMENT 128 |
| |
| /** |
| * Structure describing the data format used for stores to the FPA. |
| */ |
| typedef union { |
| uint64_t u64; |
| struct { |
| #ifdef __BIG_ENDIAN_BITFIELD |
| /* |
| * the (64-bit word) location in scratchpad to write |
| * to (if len != 0) |
| */ |
| uint64_t scraddr:8; |
| /* the number of words in the response (0 => no response) */ |
| uint64_t len:8; |
| /* the ID of the device on the non-coherent bus */ |
| uint64_t did:8; |
| /* |
| * the address that will appear in the first tick on |
| * the NCB bus. |
| */ |
| uint64_t addr:40; |
| #else |
| uint64_t addr:40; |
| uint64_t did:8; |
| uint64_t len:8; |
| uint64_t scraddr:8; |
| #endif |
| } s; |
| } cvmx_fpa_iobdma_data_t; |
| |
| /** |
| * Structure describing the current state of a FPA pool. |
| */ |
| typedef struct { |
| /* Name it was created under */ |
| const char *name; |
| /* Size of each block */ |
| uint64_t size; |
| /* The base memory address of whole block */ |
| void *base; |
| /* The number of elements in the pool at creation */ |
| uint64_t starting_element_count; |
| } cvmx_fpa_pool_info_t; |
| |
| /** |
| * Current state of all the pools. Use access functions |
| * instead of using it directly. |
| */ |
| extern cvmx_fpa_pool_info_t cvmx_fpa_pool_info[CVMX_FPA_NUM_POOLS]; |
| |
| /* CSR typedefs have been moved to cvmx-csr-*.h */ |
| |
| /** |
| * Return the name of the pool |
| * |
| * @pool: Pool to get the name of |
| * Returns The name |
| */ |
| static inline const char *cvmx_fpa_get_name(uint64_t pool) |
| { |
| return cvmx_fpa_pool_info[pool].name; |
| } |
| |
| /** |
| * Return the base of the pool |
| * |
| * @pool: Pool to get the base of |
| * Returns The base |
| */ |
| static inline void *cvmx_fpa_get_base(uint64_t pool) |
| { |
| return cvmx_fpa_pool_info[pool].base; |
| } |
| |
| /** |
| * Check if a pointer belongs to an FPA pool. Return non-zero |
| * if the supplied pointer is inside the memory controlled by |
| * an FPA pool. |
| * |
| * @pool: Pool to check |
| * @ptr: Pointer to check |
| * Returns Non-zero if pointer is in the pool. Zero if not |
| */ |
| static inline int cvmx_fpa_is_member(uint64_t pool, void *ptr) |
| { |
| return ((ptr >= cvmx_fpa_pool_info[pool].base) && |
| ((char *)ptr < |
| ((char *)(cvmx_fpa_pool_info[pool].base)) + |
| cvmx_fpa_pool_info[pool].size * |
| cvmx_fpa_pool_info[pool].starting_element_count)); |
| } |
| |
| /** |
| * Enable the FPA for use. Must be performed after any CSR |
| * configuration but before any other FPA functions. |
| */ |
| static inline void cvmx_fpa_enable(void) |
| { |
| union cvmx_fpa_ctl_status status; |
| |
| status.u64 = cvmx_read_csr(CVMX_FPA_CTL_STATUS); |
| if (status.s.enb) { |
| cvmx_dprintf |
| ("Warning: Enabling FPA when FPA already enabled.\n"); |
| } |
| |
| /* |
| * Do runtime check as we allow pass1 compiled code to run on |
| * pass2 chips. |
| */ |
| if (cvmx_octeon_is_pass1()) { |
| union cvmx_fpa_fpfx_marks marks; |
| int i; |
| for (i = 1; i < 8; i++) { |
| marks.u64 = |
| cvmx_read_csr(CVMX_FPA_FPF1_MARKS + (i - 1) * 8ull); |
| marks.s.fpf_wr = 0xe0; |
| cvmx_write_csr(CVMX_FPA_FPF1_MARKS + (i - 1) * 8ull, |
| marks.u64); |
| } |
| |
| /* Enforce a 10 cycle delay between config and enable */ |
| __delay(10); |
| } |
| |
| /* FIXME: CVMX_FPA_CTL_STATUS read is unmodelled */ |
| status.u64 = 0; |
| status.s.enb = 1; |
| cvmx_write_csr(CVMX_FPA_CTL_STATUS, status.u64); |
| } |
| |
| /** |
| * Get a new block from the FPA |
| * |
| * @pool: Pool to get the block from |
| * Returns Pointer to the block or NULL on failure |
| */ |
| static inline void *cvmx_fpa_alloc(uint64_t pool) |
| { |
| uint64_t address = |
| cvmx_read_csr(CVMX_ADDR_DID(CVMX_FULL_DID(CVMX_OCT_DID_FPA, pool))); |
| if (address) |
| return cvmx_phys_to_ptr(address); |
| else |
| return NULL; |
| } |
| |
| /** |
| * Asynchronously get a new block from the FPA |
| * |
| * @scr_addr: Local scratch address to put response in. This is a byte address, |
| * but must be 8 byte aligned. |
| * @pool: Pool to get the block from |
| */ |
| static inline void cvmx_fpa_async_alloc(uint64_t scr_addr, uint64_t pool) |
| { |
| cvmx_fpa_iobdma_data_t data; |
| |
| /* |
| * Hardware only uses 64 bit aligned locations, so convert |
| * from byte address to 64-bit index |
| */ |
| data.s.scraddr = scr_addr >> 3; |
| data.s.len = 1; |
| data.s.did = CVMX_FULL_DID(CVMX_OCT_DID_FPA, pool); |
| data.s.addr = 0; |
| cvmx_send_single(data.u64); |
| } |
| |
| /** |
| * Free a block allocated with a FPA pool. Does NOT provide memory |
| * ordering in cases where the memory block was modified by the core. |
| * |
| * @ptr: Block to free |
| * @pool: Pool to put it in |
| * @num_cache_lines: |
| * Cache lines to invalidate |
| */ |
| static inline void cvmx_fpa_free_nosync(void *ptr, uint64_t pool, |
| uint64_t num_cache_lines) |
| { |
| cvmx_addr_t newptr; |
| newptr.u64 = cvmx_ptr_to_phys(ptr); |
| newptr.sfilldidspace.didspace = |
| CVMX_ADDR_DIDSPACE(CVMX_FULL_DID(CVMX_OCT_DID_FPA, pool)); |
| /* Prevent GCC from reordering around free */ |
| barrier(); |
| /* value written is number of cache lines not written back */ |
| cvmx_write_io(newptr.u64, num_cache_lines); |
| } |
| |
| /** |
| * Free a block allocated with a FPA pool. Provides required memory |
| * ordering in cases where memory block was modified by core. |
| * |
| * @ptr: Block to free |
| * @pool: Pool to put it in |
| * @num_cache_lines: |
| * Cache lines to invalidate |
| */ |
| static inline void cvmx_fpa_free(void *ptr, uint64_t pool, |
| uint64_t num_cache_lines) |
| { |
| cvmx_addr_t newptr; |
| newptr.u64 = cvmx_ptr_to_phys(ptr); |
| newptr.sfilldidspace.didspace = |
| CVMX_ADDR_DIDSPACE(CVMX_FULL_DID(CVMX_OCT_DID_FPA, pool)); |
| /* |
| * Make sure that any previous writes to memory go out before |
| * we free this buffer. This also serves as a barrier to |
| * prevent GCC from reordering operations to after the |
| * free. |
| */ |
| CVMX_SYNCWS; |
| /* value written is number of cache lines not written back */ |
| cvmx_write_io(newptr.u64, num_cache_lines); |
| } |
| |
| /** |
| * Shutdown a Memory pool and validate that it had all of |
| * the buffers originally placed in it. This should only be |
| * called by one processor after all hardware has finished |
| * using the pool. |
| * |
| * @pool: Pool to shutdown |
| * Returns Zero on success |
| * - Positive is count of missing buffers |
| * - Negative is too many buffers or corrupted pointers |
| */ |
| extern uint64_t cvmx_fpa_shutdown_pool(uint64_t pool); |
| |
| /** |
| * Get the size of blocks controlled by the pool |
| * This is resolved to a constant at compile time. |
| * |
| * @pool: Pool to access |
| * Returns Size of the block in bytes |
| */ |
| uint64_t cvmx_fpa_get_block_size(uint64_t pool); |
| |
| #endif /* __CVM_FPA_H__ */ |