| // SPDX-License-Identifier: GPL-2.0-only |
| /* Copyright(c) 2021 Intel Corporation. All rights reserved. */ |
| #include <linux/units.h> |
| #include <linux/io-64-nonatomic-lo-hi.h> |
| #include <linux/device.h> |
| #include <linux/delay.h> |
| #include <linux/pci.h> |
| #include <linux/pci-doe.h> |
| #include <linux/aer.h> |
| #include <cxlpci.h> |
| #include <cxlmem.h> |
| #include <cxl.h> |
| #include "core.h" |
| #include "trace.h" |
| |
| /** |
| * DOC: cxl core pci |
| * |
| * Compute Express Link protocols are layered on top of PCIe. CXL core provides |
| * a set of helpers for CXL interactions which occur via PCIe. |
| */ |
| |
| static unsigned short media_ready_timeout = 60; |
| module_param(media_ready_timeout, ushort, 0644); |
| MODULE_PARM_DESC(media_ready_timeout, "seconds to wait for media ready"); |
| |
| struct cxl_walk_context { |
| struct pci_bus *bus; |
| struct cxl_port *port; |
| int type; |
| int error; |
| int count; |
| }; |
| |
| static int match_add_dports(struct pci_dev *pdev, void *data) |
| { |
| struct cxl_walk_context *ctx = data; |
| struct cxl_port *port = ctx->port; |
| int type = pci_pcie_type(pdev); |
| struct cxl_register_map map; |
| struct cxl_dport *dport; |
| u32 lnkcap, port_num; |
| int rc; |
| |
| if (pdev->bus != ctx->bus) |
| return 0; |
| if (!pci_is_pcie(pdev)) |
| return 0; |
| if (type != ctx->type) |
| return 0; |
| if (pci_read_config_dword(pdev, pci_pcie_cap(pdev) + PCI_EXP_LNKCAP, |
| &lnkcap)) |
| return 0; |
| |
| rc = cxl_find_regblock(pdev, CXL_REGLOC_RBI_COMPONENT, &map); |
| if (rc) |
| dev_dbg(&port->dev, "failed to find component registers\n"); |
| |
| port_num = FIELD_GET(PCI_EXP_LNKCAP_PN, lnkcap); |
| dport = devm_cxl_add_dport(port, &pdev->dev, port_num, map.resource); |
| if (IS_ERR(dport)) { |
| ctx->error = PTR_ERR(dport); |
| return PTR_ERR(dport); |
| } |
| ctx->count++; |
| |
| return 0; |
| } |
| |
| /** |
| * devm_cxl_port_enumerate_dports - enumerate downstream ports of the upstream port |
| * @port: cxl_port whose ->uport_dev is the upstream of dports to be enumerated |
| * |
| * Returns a positive number of dports enumerated or a negative error |
| * code. |
| */ |
| int devm_cxl_port_enumerate_dports(struct cxl_port *port) |
| { |
| struct pci_bus *bus = cxl_port_to_pci_bus(port); |
| struct cxl_walk_context ctx; |
| int type; |
| |
| if (!bus) |
| return -ENXIO; |
| |
| if (pci_is_root_bus(bus)) |
| type = PCI_EXP_TYPE_ROOT_PORT; |
| else |
| type = PCI_EXP_TYPE_DOWNSTREAM; |
| |
| ctx = (struct cxl_walk_context) { |
| .port = port, |
| .bus = bus, |
| .type = type, |
| }; |
| pci_walk_bus(bus, match_add_dports, &ctx); |
| |
| if (ctx.count == 0) |
| return -ENODEV; |
| if (ctx.error) |
| return ctx.error; |
| return ctx.count; |
| } |
| EXPORT_SYMBOL_NS_GPL(devm_cxl_port_enumerate_dports, CXL); |
| |
| static int cxl_dvsec_mem_range_valid(struct cxl_dev_state *cxlds, int id) |
| { |
| struct pci_dev *pdev = to_pci_dev(cxlds->dev); |
| int d = cxlds->cxl_dvsec; |
| bool valid = false; |
| int rc, i; |
| u32 temp; |
| |
| if (id > CXL_DVSEC_RANGE_MAX) |
| return -EINVAL; |
| |
| /* Check MEM INFO VALID bit first, give up after 1s */ |
| i = 1; |
| do { |
| rc = pci_read_config_dword(pdev, |
| d + CXL_DVSEC_RANGE_SIZE_LOW(id), |
| &temp); |
| if (rc) |
| return rc; |
| |
| valid = FIELD_GET(CXL_DVSEC_MEM_INFO_VALID, temp); |
| if (valid) |
| break; |
| msleep(1000); |
| } while (i--); |
| |
| if (!valid) { |
| dev_err(&pdev->dev, |
| "Timeout awaiting memory range %d valid after 1s.\n", |
| id); |
| return -ETIMEDOUT; |
| } |
| |
| return 0; |
| } |
| |
| static int cxl_dvsec_mem_range_active(struct cxl_dev_state *cxlds, int id) |
| { |
| struct pci_dev *pdev = to_pci_dev(cxlds->dev); |
| int d = cxlds->cxl_dvsec; |
| bool active = false; |
| int rc, i; |
| u32 temp; |
| |
| if (id > CXL_DVSEC_RANGE_MAX) |
| return -EINVAL; |
| |
| /* Check MEM ACTIVE bit, up to 60s timeout by default */ |
| for (i = media_ready_timeout; i; i--) { |
| rc = pci_read_config_dword( |
| pdev, d + CXL_DVSEC_RANGE_SIZE_LOW(id), &temp); |
| if (rc) |
| return rc; |
| |
| active = FIELD_GET(CXL_DVSEC_MEM_ACTIVE, temp); |
| if (active) |
| break; |
| msleep(1000); |
| } |
| |
| if (!active) { |
| dev_err(&pdev->dev, |
| "timeout awaiting memory active after %d seconds\n", |
| media_ready_timeout); |
| return -ETIMEDOUT; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Wait up to @media_ready_timeout for the device to report memory |
| * active. |
| */ |
| int cxl_await_media_ready(struct cxl_dev_state *cxlds) |
| { |
| struct pci_dev *pdev = to_pci_dev(cxlds->dev); |
| int d = cxlds->cxl_dvsec; |
| int rc, i, hdm_count; |
| u64 md_status; |
| u16 cap; |
| |
| rc = pci_read_config_word(pdev, |
| d + CXL_DVSEC_CAP_OFFSET, &cap); |
| if (rc) |
| return rc; |
| |
| hdm_count = FIELD_GET(CXL_DVSEC_HDM_COUNT_MASK, cap); |
| for (i = 0; i < hdm_count; i++) { |
| rc = cxl_dvsec_mem_range_valid(cxlds, i); |
| if (rc) |
| return rc; |
| } |
| |
| for (i = 0; i < hdm_count; i++) { |
| rc = cxl_dvsec_mem_range_active(cxlds, i); |
| if (rc) |
| return rc; |
| } |
| |
| md_status = readq(cxlds->regs.memdev + CXLMDEV_STATUS_OFFSET); |
| if (!CXLMDEV_READY(md_status)) |
| return -EIO; |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_NS_GPL(cxl_await_media_ready, CXL); |
| |
| static int cxl_set_mem_enable(struct cxl_dev_state *cxlds, u16 val) |
| { |
| struct pci_dev *pdev = to_pci_dev(cxlds->dev); |
| int d = cxlds->cxl_dvsec; |
| u16 ctrl; |
| int rc; |
| |
| rc = pci_read_config_word(pdev, d + CXL_DVSEC_CTRL_OFFSET, &ctrl); |
| if (rc < 0) |
| return rc; |
| |
| if ((ctrl & CXL_DVSEC_MEM_ENABLE) == val) |
| return 1; |
| ctrl &= ~CXL_DVSEC_MEM_ENABLE; |
| ctrl |= val; |
| |
| rc = pci_write_config_word(pdev, d + CXL_DVSEC_CTRL_OFFSET, ctrl); |
| if (rc < 0) |
| return rc; |
| |
| return 0; |
| } |
| |
| static void clear_mem_enable(void *cxlds) |
| { |
| cxl_set_mem_enable(cxlds, 0); |
| } |
| |
| static int devm_cxl_enable_mem(struct device *host, struct cxl_dev_state *cxlds) |
| { |
| int rc; |
| |
| rc = cxl_set_mem_enable(cxlds, CXL_DVSEC_MEM_ENABLE); |
| if (rc < 0) |
| return rc; |
| if (rc > 0) |
| return 0; |
| return devm_add_action_or_reset(host, clear_mem_enable, cxlds); |
| } |
| |
| /* require dvsec ranges to be covered by a locked platform window */ |
| static int dvsec_range_allowed(struct device *dev, void *arg) |
| { |
| struct range *dev_range = arg; |
| struct cxl_decoder *cxld; |
| |
| if (!is_root_decoder(dev)) |
| return 0; |
| |
| cxld = to_cxl_decoder(dev); |
| |
| if (!(cxld->flags & CXL_DECODER_F_RAM)) |
| return 0; |
| |
| return range_contains(&cxld->hpa_range, dev_range); |
| } |
| |
| static void disable_hdm(void *_cxlhdm) |
| { |
| u32 global_ctrl; |
| struct cxl_hdm *cxlhdm = _cxlhdm; |
| void __iomem *hdm = cxlhdm->regs.hdm_decoder; |
| |
| global_ctrl = readl(hdm + CXL_HDM_DECODER_CTRL_OFFSET); |
| writel(global_ctrl & ~CXL_HDM_DECODER_ENABLE, |
| hdm + CXL_HDM_DECODER_CTRL_OFFSET); |
| } |
| |
| static int devm_cxl_enable_hdm(struct device *host, struct cxl_hdm *cxlhdm) |
| { |
| void __iomem *hdm = cxlhdm->regs.hdm_decoder; |
| u32 global_ctrl; |
| |
| global_ctrl = readl(hdm + CXL_HDM_DECODER_CTRL_OFFSET); |
| writel(global_ctrl | CXL_HDM_DECODER_ENABLE, |
| hdm + CXL_HDM_DECODER_CTRL_OFFSET); |
| |
| return devm_add_action_or_reset(host, disable_hdm, cxlhdm); |
| } |
| |
| int cxl_dvsec_rr_decode(struct device *dev, struct cxl_port *port, |
| struct cxl_endpoint_dvsec_info *info) |
| { |
| struct pci_dev *pdev = to_pci_dev(dev); |
| struct cxl_dev_state *cxlds = pci_get_drvdata(pdev); |
| int hdm_count, rc, i, ranges = 0; |
| int d = cxlds->cxl_dvsec; |
| u16 cap, ctrl; |
| |
| if (!d) { |
| dev_dbg(dev, "No DVSEC Capability\n"); |
| return -ENXIO; |
| } |
| |
| rc = pci_read_config_word(pdev, d + CXL_DVSEC_CAP_OFFSET, &cap); |
| if (rc) |
| return rc; |
| |
| if (!(cap & CXL_DVSEC_MEM_CAPABLE)) { |
| dev_dbg(dev, "Not MEM Capable\n"); |
| return -ENXIO; |
| } |
| |
| /* |
| * It is not allowed by spec for MEM.capable to be set and have 0 legacy |
| * HDM decoders (values > 2 are also undefined as of CXL 2.0). As this |
| * driver is for a spec defined class code which must be CXL.mem |
| * capable, there is no point in continuing to enable CXL.mem. |
| */ |
| hdm_count = FIELD_GET(CXL_DVSEC_HDM_COUNT_MASK, cap); |
| if (!hdm_count || hdm_count > 2) |
| return -EINVAL; |
| |
| /* |
| * The current DVSEC values are moot if the memory capability is |
| * disabled, and they will remain moot after the HDM Decoder |
| * capability is enabled. |
| */ |
| rc = pci_read_config_word(pdev, d + CXL_DVSEC_CTRL_OFFSET, &ctrl); |
| if (rc) |
| return rc; |
| |
| info->mem_enabled = FIELD_GET(CXL_DVSEC_MEM_ENABLE, ctrl); |
| if (!info->mem_enabled) |
| return 0; |
| |
| for (i = 0; i < hdm_count; i++) { |
| u64 base, size; |
| u32 temp; |
| |
| rc = cxl_dvsec_mem_range_valid(cxlds, i); |
| if (rc) |
| return rc; |
| |
| rc = pci_read_config_dword( |
| pdev, d + CXL_DVSEC_RANGE_SIZE_HIGH(i), &temp); |
| if (rc) |
| return rc; |
| |
| size = (u64)temp << 32; |
| |
| rc = pci_read_config_dword( |
| pdev, d + CXL_DVSEC_RANGE_SIZE_LOW(i), &temp); |
| if (rc) |
| return rc; |
| |
| size |= temp & CXL_DVSEC_MEM_SIZE_LOW_MASK; |
| if (!size) { |
| continue; |
| } |
| |
| rc = pci_read_config_dword( |
| pdev, d + CXL_DVSEC_RANGE_BASE_HIGH(i), &temp); |
| if (rc) |
| return rc; |
| |
| base = (u64)temp << 32; |
| |
| rc = pci_read_config_dword( |
| pdev, d + CXL_DVSEC_RANGE_BASE_LOW(i), &temp); |
| if (rc) |
| return rc; |
| |
| base |= temp & CXL_DVSEC_MEM_BASE_LOW_MASK; |
| |
| info->dvsec_range[ranges++] = (struct range) { |
| .start = base, |
| .end = base + size - 1 |
| }; |
| } |
| |
| info->ranges = ranges; |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_NS_GPL(cxl_dvsec_rr_decode, CXL); |
| |
| /** |
| * cxl_hdm_decode_init() - Setup HDM decoding for the endpoint |
| * @cxlds: Device state |
| * @cxlhdm: Mapped HDM decoder Capability |
| * @info: Cached DVSEC range registers info |
| * |
| * Try to enable the endpoint's HDM Decoder Capability |
| */ |
| int cxl_hdm_decode_init(struct cxl_dev_state *cxlds, struct cxl_hdm *cxlhdm, |
| struct cxl_endpoint_dvsec_info *info) |
| { |
| void __iomem *hdm = cxlhdm->regs.hdm_decoder; |
| struct cxl_port *port = cxlhdm->port; |
| struct device *dev = cxlds->dev; |
| struct cxl_port *root; |
| int i, rc, allowed; |
| u32 global_ctrl = 0; |
| |
| if (hdm) |
| global_ctrl = readl(hdm + CXL_HDM_DECODER_CTRL_OFFSET); |
| |
| /* |
| * If the HDM Decoder Capability is already enabled then assume |
| * that some other agent like platform firmware set it up. |
| */ |
| if (global_ctrl & CXL_HDM_DECODER_ENABLE || (!hdm && info->mem_enabled)) |
| return devm_cxl_enable_mem(&port->dev, cxlds); |
| else if (!hdm) |
| return -ENODEV; |
| |
| root = to_cxl_port(port->dev.parent); |
| while (!is_cxl_root(root) && is_cxl_port(root->dev.parent)) |
| root = to_cxl_port(root->dev.parent); |
| if (!is_cxl_root(root)) { |
| dev_err(dev, "Failed to acquire root port for HDM enable\n"); |
| return -ENODEV; |
| } |
| |
| if (!info->mem_enabled) { |
| rc = devm_cxl_enable_hdm(&port->dev, cxlhdm); |
| if (rc) |
| return rc; |
| |
| return devm_cxl_enable_mem(&port->dev, cxlds); |
| } |
| |
| for (i = 0, allowed = 0; i < info->ranges; i++) { |
| struct device *cxld_dev; |
| |
| cxld_dev = device_find_child(&root->dev, &info->dvsec_range[i], |
| dvsec_range_allowed); |
| if (!cxld_dev) { |
| dev_dbg(dev, "DVSEC Range%d denied by platform\n", i); |
| continue; |
| } |
| dev_dbg(dev, "DVSEC Range%d allowed by platform\n", i); |
| put_device(cxld_dev); |
| allowed++; |
| } |
| |
| if (!allowed) { |
| dev_err(dev, "Range register decodes outside platform defined CXL ranges.\n"); |
| return -ENXIO; |
| } |
| |
| /* |
| * Per CXL 2.0 Section 8.1.3.8.3 and 8.1.3.8.4 DVSEC CXL Range 1 Base |
| * [High,Low] when HDM operation is enabled the range register values |
| * are ignored by the device, but the spec also recommends matching the |
| * DVSEC Range 1,2 to HDM Decoder Range 0,1. So, non-zero info->ranges |
| * are expected even though Linux does not require or maintain that |
| * match. If at least one DVSEC range is enabled and allowed, skip HDM |
| * Decoder Capability Enable. |
| */ |
| return 0; |
| } |
| EXPORT_SYMBOL_NS_GPL(cxl_hdm_decode_init, CXL); |
| |
| #define CXL_DOE_TABLE_ACCESS_REQ_CODE 0x000000ff |
| #define CXL_DOE_TABLE_ACCESS_REQ_CODE_READ 0 |
| #define CXL_DOE_TABLE_ACCESS_TABLE_TYPE 0x0000ff00 |
| #define CXL_DOE_TABLE_ACCESS_TABLE_TYPE_CDATA 0 |
| #define CXL_DOE_TABLE_ACCESS_ENTRY_HANDLE 0xffff0000 |
| #define CXL_DOE_TABLE_ACCESS_LAST_ENTRY 0xffff |
| #define CXL_DOE_PROTOCOL_TABLE_ACCESS 2 |
| |
| #define CDAT_DOE_REQ(entry_handle) cpu_to_le32 \ |
| (FIELD_PREP(CXL_DOE_TABLE_ACCESS_REQ_CODE, \ |
| CXL_DOE_TABLE_ACCESS_REQ_CODE_READ) | \ |
| FIELD_PREP(CXL_DOE_TABLE_ACCESS_TABLE_TYPE, \ |
| CXL_DOE_TABLE_ACCESS_TABLE_TYPE_CDATA) | \ |
| FIELD_PREP(CXL_DOE_TABLE_ACCESS_ENTRY_HANDLE, (entry_handle))) |
| |
| static int cxl_cdat_get_length(struct device *dev, |
| struct pci_doe_mb *doe_mb, |
| size_t *length) |
| { |
| __le32 request = CDAT_DOE_REQ(0); |
| __le32 response[2]; |
| int rc; |
| |
| rc = pci_doe(doe_mb, PCI_VENDOR_ID_CXL, |
| CXL_DOE_PROTOCOL_TABLE_ACCESS, |
| &request, sizeof(request), |
| &response, sizeof(response)); |
| if (rc < 0) { |
| dev_err(dev, "DOE failed: %d", rc); |
| return rc; |
| } |
| if (rc < sizeof(response)) |
| return -EIO; |
| |
| *length = le32_to_cpu(response[1]); |
| dev_dbg(dev, "CDAT length %zu\n", *length); |
| |
| return 0; |
| } |
| |
| static int cxl_cdat_read_table(struct device *dev, |
| struct pci_doe_mb *doe_mb, |
| struct cdat_doe_rsp *rsp, size_t *length) |
| { |
| size_t received, remaining = *length; |
| unsigned int entry_handle = 0; |
| union cdat_data *data; |
| __le32 saved_dw = 0; |
| |
| do { |
| __le32 request = CDAT_DOE_REQ(entry_handle); |
| int rc; |
| |
| rc = pci_doe(doe_mb, PCI_VENDOR_ID_CXL, |
| CXL_DOE_PROTOCOL_TABLE_ACCESS, |
| &request, sizeof(request), |
| rsp, sizeof(*rsp) + remaining); |
| if (rc < 0) { |
| dev_err(dev, "DOE failed: %d", rc); |
| return rc; |
| } |
| |
| if (rc < sizeof(*rsp)) |
| return -EIO; |
| |
| data = (union cdat_data *)rsp->data; |
| received = rc - sizeof(*rsp); |
| |
| if (entry_handle == 0) { |
| if (received != sizeof(data->header)) |
| return -EIO; |
| } else { |
| if (received < sizeof(data->entry) || |
| received != le16_to_cpu(data->entry.length)) |
| return -EIO; |
| } |
| |
| /* Get the CXL table access header entry handle */ |
| entry_handle = FIELD_GET(CXL_DOE_TABLE_ACCESS_ENTRY_HANDLE, |
| le32_to_cpu(rsp->doe_header)); |
| |
| /* |
| * Table Access Response Header overwrote the last DW of |
| * previous entry, so restore that DW |
| */ |
| rsp->doe_header = saved_dw; |
| remaining -= received; |
| rsp = (void *)rsp + received; |
| saved_dw = rsp->doe_header; |
| } while (entry_handle != CXL_DOE_TABLE_ACCESS_LAST_ENTRY); |
| |
| /* Length in CDAT header may exceed concatenation of CDAT entries */ |
| *length -= remaining; |
| |
| return 0; |
| } |
| |
| static unsigned char cdat_checksum(void *buf, size_t size) |
| { |
| unsigned char sum, *data = buf; |
| size_t i; |
| |
| for (sum = 0, i = 0; i < size; i++) |
| sum += data[i]; |
| return sum; |
| } |
| |
| /** |
| * read_cdat_data - Read the CDAT data on this port |
| * @port: Port to read data from |
| * |
| * This call will sleep waiting for responses from the DOE mailbox. |
| */ |
| void read_cdat_data(struct cxl_port *port) |
| { |
| struct device *uport = port->uport_dev; |
| struct device *dev = &port->dev; |
| struct pci_doe_mb *doe_mb; |
| struct pci_dev *pdev = NULL; |
| struct cxl_memdev *cxlmd; |
| struct cdat_doe_rsp *buf; |
| size_t table_length, length; |
| int rc; |
| |
| if (is_cxl_memdev(uport)) { |
| struct device *host; |
| |
| cxlmd = to_cxl_memdev(uport); |
| host = cxlmd->dev.parent; |
| if (dev_is_pci(host)) |
| pdev = to_pci_dev(host); |
| } else if (dev_is_pci(uport)) { |
| pdev = to_pci_dev(uport); |
| } |
| |
| if (!pdev) |
| return; |
| |
| doe_mb = pci_find_doe_mailbox(pdev, PCI_VENDOR_ID_CXL, |
| CXL_DOE_PROTOCOL_TABLE_ACCESS); |
| if (!doe_mb) { |
| dev_dbg(dev, "No CDAT mailbox\n"); |
| return; |
| } |
| |
| port->cdat_available = true; |
| |
| if (cxl_cdat_get_length(dev, doe_mb, &length)) { |
| dev_dbg(dev, "No CDAT length\n"); |
| return; |
| } |
| |
| /* |
| * The begin of the CDAT buffer needs space for additional 4 |
| * bytes for the DOE header. Table data starts afterwards. |
| */ |
| buf = devm_kzalloc(dev, sizeof(*buf) + length, GFP_KERNEL); |
| if (!buf) |
| goto err; |
| |
| table_length = length; |
| |
| rc = cxl_cdat_read_table(dev, doe_mb, buf, &length); |
| if (rc) |
| goto err; |
| |
| if (table_length != length) |
| dev_warn(dev, "Malformed CDAT table length (%zu:%zu), discarding trailing data\n", |
| table_length, length); |
| |
| if (cdat_checksum(buf->data, length)) |
| goto err; |
| |
| port->cdat.table = buf->data; |
| port->cdat.length = length; |
| |
| return; |
| err: |
| /* Don't leave table data allocated on error */ |
| devm_kfree(dev, buf); |
| dev_err(dev, "Failed to read/validate CDAT.\n"); |
| } |
| EXPORT_SYMBOL_NS_GPL(read_cdat_data, CXL); |
| |
| static void __cxl_handle_cor_ras(struct cxl_dev_state *cxlds, |
| void __iomem *ras_base) |
| { |
| void __iomem *addr; |
| u32 status; |
| |
| if (!ras_base) |
| return; |
| |
| addr = ras_base + CXL_RAS_CORRECTABLE_STATUS_OFFSET; |
| status = readl(addr); |
| if (status & CXL_RAS_CORRECTABLE_STATUS_MASK) { |
| writel(status & CXL_RAS_CORRECTABLE_STATUS_MASK, addr); |
| trace_cxl_aer_correctable_error(cxlds->cxlmd, status); |
| } |
| } |
| |
| static void cxl_handle_endpoint_cor_ras(struct cxl_dev_state *cxlds) |
| { |
| return __cxl_handle_cor_ras(cxlds, cxlds->regs.ras); |
| } |
| |
| /* CXL spec rev3.0 8.2.4.16.1 */ |
| static void header_log_copy(void __iomem *ras_base, u32 *log) |
| { |
| void __iomem *addr; |
| u32 *log_addr; |
| int i, log_u32_size = CXL_HEADERLOG_SIZE / sizeof(u32); |
| |
| addr = ras_base + CXL_RAS_HEADER_LOG_OFFSET; |
| log_addr = log; |
| |
| for (i = 0; i < log_u32_size; i++) { |
| *log_addr = readl(addr); |
| log_addr++; |
| addr += sizeof(u32); |
| } |
| } |
| |
| /* |
| * Log the state of the RAS status registers and prepare them to log the |
| * next error status. Return 1 if reset needed. |
| */ |
| static bool __cxl_handle_ras(struct cxl_dev_state *cxlds, |
| void __iomem *ras_base) |
| { |
| u32 hl[CXL_HEADERLOG_SIZE_U32]; |
| void __iomem *addr; |
| u32 status; |
| u32 fe; |
| |
| if (!ras_base) |
| return false; |
| |
| addr = ras_base + CXL_RAS_UNCORRECTABLE_STATUS_OFFSET; |
| status = readl(addr); |
| if (!(status & CXL_RAS_UNCORRECTABLE_STATUS_MASK)) |
| return false; |
| |
| /* If multiple errors, log header points to first error from ctrl reg */ |
| if (hweight32(status) > 1) { |
| void __iomem *rcc_addr = |
| ras_base + CXL_RAS_CAP_CONTROL_OFFSET; |
| |
| fe = BIT(FIELD_GET(CXL_RAS_CAP_CONTROL_FE_MASK, |
| readl(rcc_addr))); |
| } else { |
| fe = status; |
| } |
| |
| header_log_copy(ras_base, hl); |
| trace_cxl_aer_uncorrectable_error(cxlds->cxlmd, status, fe, hl); |
| writel(status & CXL_RAS_UNCORRECTABLE_STATUS_MASK, addr); |
| |
| return true; |
| } |
| |
| static bool cxl_handle_endpoint_ras(struct cxl_dev_state *cxlds) |
| { |
| return __cxl_handle_ras(cxlds, cxlds->regs.ras); |
| } |
| |
| #ifdef CONFIG_PCIEAER_CXL |
| |
| static void cxl_dport_map_rch_aer(struct cxl_dport *dport) |
| { |
| resource_size_t aer_phys; |
| struct device *host; |
| u16 aer_cap; |
| |
| aer_cap = cxl_rcrb_to_aer(dport->dport_dev, dport->rcrb.base); |
| if (aer_cap) { |
| host = dport->reg_map.host; |
| aer_phys = aer_cap + dport->rcrb.base; |
| dport->regs.dport_aer = devm_cxl_iomap_block(host, aer_phys, |
| sizeof(struct aer_capability_regs)); |
| } |
| } |
| |
| static void cxl_dport_map_ras(struct cxl_dport *dport) |
| { |
| struct cxl_register_map *map = &dport->reg_map; |
| struct device *dev = dport->dport_dev; |
| |
| if (!map->component_map.ras.valid) |
| dev_dbg(dev, "RAS registers not found\n"); |
| else if (cxl_map_component_regs(map, &dport->regs.component, |
| BIT(CXL_CM_CAP_CAP_ID_RAS))) |
| dev_dbg(dev, "Failed to map RAS capability.\n"); |
| } |
| |
| static void cxl_disable_rch_root_ints(struct cxl_dport *dport) |
| { |
| void __iomem *aer_base = dport->regs.dport_aer; |
| u32 aer_cmd_mask, aer_cmd; |
| |
| if (!aer_base) |
| return; |
| |
| /* |
| * Disable RCH root port command interrupts. |
| * CXL 3.0 12.2.1.1 - RCH Downstream Port-detected Errors |
| * |
| * This sequence may not be necessary. CXL spec states disabling |
| * the root cmd register's interrupts is required. But, PCI spec |
| * shows these are disabled by default on reset. |
| */ |
| aer_cmd_mask = (PCI_ERR_ROOT_CMD_COR_EN | |
| PCI_ERR_ROOT_CMD_NONFATAL_EN | |
| PCI_ERR_ROOT_CMD_FATAL_EN); |
| aer_cmd = readl(aer_base + PCI_ERR_ROOT_COMMAND); |
| aer_cmd &= ~aer_cmd_mask; |
| writel(aer_cmd, aer_base + PCI_ERR_ROOT_COMMAND); |
| } |
| |
| /** |
| * cxl_dport_init_ras_reporting - Setup CXL RAS report on this dport |
| * @dport: the cxl_dport that needs to be initialized |
| * @host: host device for devm operations |
| */ |
| void cxl_dport_init_ras_reporting(struct cxl_dport *dport, struct device *host) |
| { |
| dport->reg_map.host = host; |
| cxl_dport_map_ras(dport); |
| |
| if (dport->rch) { |
| struct pci_host_bridge *host_bridge = to_pci_host_bridge(dport->dport_dev); |
| |
| if (!host_bridge->native_aer) |
| return; |
| |
| cxl_dport_map_rch_aer(dport); |
| cxl_disable_rch_root_ints(dport); |
| } |
| } |
| EXPORT_SYMBOL_NS_GPL(cxl_dport_init_ras_reporting, CXL); |
| |
| static void cxl_handle_rdport_cor_ras(struct cxl_dev_state *cxlds, |
| struct cxl_dport *dport) |
| { |
| return __cxl_handle_cor_ras(cxlds, dport->regs.ras); |
| } |
| |
| static bool cxl_handle_rdport_ras(struct cxl_dev_state *cxlds, |
| struct cxl_dport *dport) |
| { |
| return __cxl_handle_ras(cxlds, dport->regs.ras); |
| } |
| |
| /* |
| * Copy the AER capability registers using 32 bit read accesses. |
| * This is necessary because RCRB AER capability is MMIO mapped. Clear the |
| * status after copying. |
| * |
| * @aer_base: base address of AER capability block in RCRB |
| * @aer_regs: destination for copying AER capability |
| */ |
| static bool cxl_rch_get_aer_info(void __iomem *aer_base, |
| struct aer_capability_regs *aer_regs) |
| { |
| int read_cnt = sizeof(struct aer_capability_regs) / sizeof(u32); |
| u32 *aer_regs_buf = (u32 *)aer_regs; |
| int n; |
| |
| if (!aer_base) |
| return false; |
| |
| /* Use readl() to guarantee 32-bit accesses */ |
| for (n = 0; n < read_cnt; n++) |
| aer_regs_buf[n] = readl(aer_base + n * sizeof(u32)); |
| |
| writel(aer_regs->uncor_status, aer_base + PCI_ERR_UNCOR_STATUS); |
| writel(aer_regs->cor_status, aer_base + PCI_ERR_COR_STATUS); |
| |
| return true; |
| } |
| |
| /* Get AER severity. Return false if there is no error. */ |
| static bool cxl_rch_get_aer_severity(struct aer_capability_regs *aer_regs, |
| int *severity) |
| { |
| if (aer_regs->uncor_status & ~aer_regs->uncor_mask) { |
| if (aer_regs->uncor_status & PCI_ERR_ROOT_FATAL_RCV) |
| *severity = AER_FATAL; |
| else |
| *severity = AER_NONFATAL; |
| return true; |
| } |
| |
| if (aer_regs->cor_status & ~aer_regs->cor_mask) { |
| *severity = AER_CORRECTABLE; |
| return true; |
| } |
| |
| return false; |
| } |
| |
| static void cxl_handle_rdport_errors(struct cxl_dev_state *cxlds) |
| { |
| struct pci_dev *pdev = to_pci_dev(cxlds->dev); |
| struct aer_capability_regs aer_regs; |
| struct cxl_dport *dport; |
| int severity; |
| |
| struct cxl_port *port __free(put_cxl_port) = |
| cxl_pci_find_port(pdev, &dport); |
| if (!port) |
| return; |
| |
| if (!cxl_rch_get_aer_info(dport->regs.dport_aer, &aer_regs)) |
| return; |
| |
| if (!cxl_rch_get_aer_severity(&aer_regs, &severity)) |
| return; |
| |
| pci_print_aer(pdev, severity, &aer_regs); |
| |
| if (severity == AER_CORRECTABLE) |
| cxl_handle_rdport_cor_ras(cxlds, dport); |
| else |
| cxl_handle_rdport_ras(cxlds, dport); |
| } |
| |
| #else |
| static void cxl_handle_rdport_errors(struct cxl_dev_state *cxlds) { } |
| #endif |
| |
| void cxl_cor_error_detected(struct pci_dev *pdev) |
| { |
| struct cxl_dev_state *cxlds = pci_get_drvdata(pdev); |
| struct device *dev = &cxlds->cxlmd->dev; |
| |
| scoped_guard(device, dev) { |
| if (!dev->driver) { |
| dev_warn(&pdev->dev, |
| "%s: memdev disabled, abort error handling\n", |
| dev_name(dev)); |
| return; |
| } |
| |
| if (cxlds->rcd) |
| cxl_handle_rdport_errors(cxlds); |
| |
| cxl_handle_endpoint_cor_ras(cxlds); |
| } |
| } |
| EXPORT_SYMBOL_NS_GPL(cxl_cor_error_detected, CXL); |
| |
| pci_ers_result_t cxl_error_detected(struct pci_dev *pdev, |
| pci_channel_state_t state) |
| { |
| struct cxl_dev_state *cxlds = pci_get_drvdata(pdev); |
| struct cxl_memdev *cxlmd = cxlds->cxlmd; |
| struct device *dev = &cxlmd->dev; |
| bool ue; |
| |
| scoped_guard(device, dev) { |
| if (!dev->driver) { |
| dev_warn(&pdev->dev, |
| "%s: memdev disabled, abort error handling\n", |
| dev_name(dev)); |
| return PCI_ERS_RESULT_DISCONNECT; |
| } |
| |
| if (cxlds->rcd) |
| cxl_handle_rdport_errors(cxlds); |
| /* |
| * A frozen channel indicates an impending reset which is fatal to |
| * CXL.mem operation, and will likely crash the system. On the off |
| * chance the situation is recoverable dump the status of the RAS |
| * capability registers and bounce the active state of the memdev. |
| */ |
| ue = cxl_handle_endpoint_ras(cxlds); |
| } |
| |
| |
| switch (state) { |
| case pci_channel_io_normal: |
| if (ue) { |
| device_release_driver(dev); |
| return PCI_ERS_RESULT_NEED_RESET; |
| } |
| return PCI_ERS_RESULT_CAN_RECOVER; |
| case pci_channel_io_frozen: |
| dev_warn(&pdev->dev, |
| "%s: frozen state error detected, disable CXL.mem\n", |
| dev_name(dev)); |
| device_release_driver(dev); |
| return PCI_ERS_RESULT_NEED_RESET; |
| case pci_channel_io_perm_failure: |
| dev_warn(&pdev->dev, |
| "failure state error detected, request disconnect\n"); |
| return PCI_ERS_RESULT_DISCONNECT; |
| } |
| return PCI_ERS_RESULT_NEED_RESET; |
| } |
| EXPORT_SYMBOL_NS_GPL(cxl_error_detected, CXL); |
| |
| static int cxl_flit_size(struct pci_dev *pdev) |
| { |
| if (cxl_pci_flit_256(pdev)) |
| return 256; |
| |
| return 68; |
| } |
| |
| /** |
| * cxl_pci_get_latency - calculate the link latency for the PCIe link |
| * @pdev: PCI device |
| * |
| * return: calculated latency or 0 for no latency |
| * |
| * CXL Memory Device SW Guide v1.0 2.11.4 Link latency calculation |
| * Link latency = LinkPropagationLatency + FlitLatency + RetimerLatency |
| * LinkProgationLatency is negligible, so 0 will be used |
| * RetimerLatency is assumed to be negligible and 0 will be used |
| * FlitLatency = FlitSize / LinkBandwidth |
| * FlitSize is defined by spec. CXL rev3.0 4.2.1. |
| * 68B flit is used up to 32GT/s. >32GT/s, 256B flit size is used. |
| * The FlitLatency is converted to picoseconds. |
| */ |
| long cxl_pci_get_latency(struct pci_dev *pdev) |
| { |
| long bw; |
| |
| bw = pcie_link_speed_mbps(pdev); |
| if (bw < 0) |
| return 0; |
| bw /= BITS_PER_BYTE; |
| |
| return cxl_flit_size(pdev) * MEGA / bw; |
| } |
| |
| static int __cxl_endpoint_decoder_reset_detected(struct device *dev, void *data) |
| { |
| struct cxl_port *port = data; |
| struct cxl_decoder *cxld; |
| struct cxl_hdm *cxlhdm; |
| void __iomem *hdm; |
| u32 ctrl; |
| |
| if (!is_endpoint_decoder(dev)) |
| return 0; |
| |
| cxld = to_cxl_decoder(dev); |
| if ((cxld->flags & CXL_DECODER_F_ENABLE) == 0) |
| return 0; |
| |
| cxlhdm = dev_get_drvdata(&port->dev); |
| hdm = cxlhdm->regs.hdm_decoder; |
| ctrl = readl(hdm + CXL_HDM_DECODER0_CTRL_OFFSET(cxld->id)); |
| |
| return !FIELD_GET(CXL_HDM_DECODER0_CTRL_COMMITTED, ctrl); |
| } |
| |
| bool cxl_endpoint_decoder_reset_detected(struct cxl_port *port) |
| { |
| return device_for_each_child(&port->dev, port, |
| __cxl_endpoint_decoder_reset_detected); |
| } |
| EXPORT_SYMBOL_NS_GPL(cxl_endpoint_decoder_reset_detected, CXL); |
| |
| int cxl_pci_get_bandwidth(struct pci_dev *pdev, struct access_coordinate *c) |
| { |
| int speed, bw; |
| u16 lnksta; |
| u32 width; |
| |
| speed = pcie_link_speed_mbps(pdev); |
| if (speed < 0) |
| return speed; |
| speed /= BITS_PER_BYTE; |
| |
| pcie_capability_read_word(pdev, PCI_EXP_LNKSTA, &lnksta); |
| width = FIELD_GET(PCI_EXP_LNKSTA_NLW, lnksta); |
| bw = speed * width; |
| |
| for (int i = 0; i < ACCESS_COORDINATE_MAX; i++) { |
| c[i].read_bandwidth = bw; |
| c[i].write_bandwidth = bw; |
| } |
| |
| return 0; |
| } |