| /* |
| * Copyright © 2006 Intel Corporation |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice (including the next |
| * paragraph) shall be included in all copies or substantial portions of the |
| * Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
| * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE |
| * SOFTWARE. |
| * |
| * Authors: |
| * Eric Anholt <eric@anholt.net> |
| * |
| */ |
| |
| #include <linux/firmware.h> |
| |
| #include <drm/display/drm_dp_helper.h> |
| #include <drm/display/drm_dsc_helper.h> |
| #include <drm/drm_edid.h> |
| #include <drm/drm_fixed.h> |
| |
| #include "i915_drv.h" |
| #include "i915_reg.h" |
| #include "intel_display.h" |
| #include "intel_display_types.h" |
| #include "intel_gmbus.h" |
| #include "intel_uncore.h" |
| |
| #define _INTEL_BIOS_PRIVATE |
| #include "intel_vbt_defs.h" |
| |
| /** |
| * DOC: Video BIOS Table (VBT) |
| * |
| * The Video BIOS Table, or VBT, provides platform and board specific |
| * configuration information to the driver that is not discoverable or available |
| * through other means. The configuration is mostly related to display |
| * hardware. The VBT is available via the ACPI OpRegion or, on older systems, in |
| * the PCI ROM. |
| * |
| * The VBT consists of a VBT Header (defined as &struct vbt_header), a BDB |
| * Header (&struct bdb_header), and a number of BIOS Data Blocks (BDB) that |
| * contain the actual configuration information. The VBT Header, and thus the |
| * VBT, begins with "$VBT" signature. The VBT Header contains the offset of the |
| * BDB Header. The data blocks are concatenated after the BDB Header. The data |
| * blocks have a 1-byte Block ID, 2-byte Block Size, and Block Size bytes of |
| * data. (Block 53, the MIPI Sequence Block is an exception.) |
| * |
| * The driver parses the VBT during load. The relevant information is stored in |
| * driver private data for ease of use, and the actual VBT is not read after |
| * that. |
| */ |
| |
| /* Wrapper for VBT child device config */ |
| struct intel_bios_encoder_data { |
| struct intel_display *display; |
| |
| struct child_device_config child; |
| struct dsc_compression_parameters_entry *dsc; |
| struct list_head node; |
| }; |
| |
| #define TARGET_ADDR1 0x70 |
| #define TARGET_ADDR2 0x72 |
| |
| /* Get BDB block size given a pointer to Block ID. */ |
| static u32 _get_blocksize(const u8 *block_base) |
| { |
| /* The MIPI Sequence Block v3+ has a separate size field. */ |
| if (*block_base == BDB_MIPI_SEQUENCE && *(block_base + 3) >= 3) |
| return *((const u32 *)(block_base + 4)); |
| else |
| return *((const u16 *)(block_base + 1)); |
| } |
| |
| /* Get BDB block size give a pointer to data after Block ID and Block Size. */ |
| static u32 get_blocksize(const void *block_data) |
| { |
| return _get_blocksize(block_data - 3); |
| } |
| |
| static const void * |
| find_raw_section(const void *_bdb, enum bdb_block_id section_id) |
| { |
| const struct bdb_header *bdb = _bdb; |
| const u8 *base = _bdb; |
| int index = 0; |
| u32 total, current_size; |
| enum bdb_block_id current_id; |
| |
| /* skip to first section */ |
| index += bdb->header_size; |
| total = bdb->bdb_size; |
| |
| /* walk the sections looking for section_id */ |
| while (index + 3 < total) { |
| current_id = *(base + index); |
| current_size = _get_blocksize(base + index); |
| index += 3; |
| |
| if (index + current_size > total) |
| return NULL; |
| |
| if (current_id == section_id) |
| return base + index; |
| |
| index += current_size; |
| } |
| |
| return NULL; |
| } |
| |
| /* |
| * Offset from the start of BDB to the start of the |
| * block data (just past the block header). |
| */ |
| static u32 raw_block_offset(const void *bdb, enum bdb_block_id section_id) |
| { |
| const void *block; |
| |
| block = find_raw_section(bdb, section_id); |
| if (!block) |
| return 0; |
| |
| return block - bdb; |
| } |
| |
| struct bdb_block_entry { |
| struct list_head node; |
| enum bdb_block_id section_id; |
| u8 data[]; |
| }; |
| |
| static const void * |
| bdb_find_section(struct intel_display *display, |
| enum bdb_block_id section_id) |
| { |
| struct bdb_block_entry *entry; |
| |
| list_for_each_entry(entry, &display->vbt.bdb_blocks, node) { |
| if (entry->section_id == section_id) |
| return entry->data + 3; |
| } |
| |
| return NULL; |
| } |
| |
| static const struct { |
| enum bdb_block_id section_id; |
| size_t min_size; |
| } bdb_blocks[] = { |
| { .section_id = BDB_GENERAL_FEATURES, |
| .min_size = sizeof(struct bdb_general_features), }, |
| { .section_id = BDB_GENERAL_DEFINITIONS, |
| .min_size = sizeof(struct bdb_general_definitions), }, |
| { .section_id = BDB_PSR, |
| .min_size = sizeof(struct bdb_psr), }, |
| { .section_id = BDB_DRIVER_FEATURES, |
| .min_size = sizeof(struct bdb_driver_features), }, |
| { .section_id = BDB_SDVO_LVDS_OPTIONS, |
| .min_size = sizeof(struct bdb_sdvo_lvds_options), }, |
| { .section_id = BDB_SDVO_LVDS_DTD, |
| .min_size = sizeof(struct bdb_sdvo_lvds_dtd), }, |
| { .section_id = BDB_EDP, |
| .min_size = sizeof(struct bdb_edp), }, |
| { .section_id = BDB_LFP_OPTIONS, |
| .min_size = sizeof(struct bdb_lfp_options), }, |
| /* |
| * BDB_LFP_DATA depends on BDB_LFP_DATA_PTRS, |
| * so keep the two ordered. |
| */ |
| { .section_id = BDB_LFP_DATA_PTRS, |
| .min_size = sizeof(struct bdb_lfp_data_ptrs), }, |
| { .section_id = BDB_LFP_DATA, |
| .min_size = 0, /* special case */ }, |
| { .section_id = BDB_LFP_BACKLIGHT, |
| .min_size = sizeof(struct bdb_lfp_backlight), }, |
| { .section_id = BDB_LFP_POWER, |
| .min_size = sizeof(struct bdb_lfp_power), }, |
| { .section_id = BDB_MIPI_CONFIG, |
| .min_size = sizeof(struct bdb_mipi_config), }, |
| { .section_id = BDB_MIPI_SEQUENCE, |
| .min_size = sizeof(struct bdb_mipi_sequence) }, |
| { .section_id = BDB_COMPRESSION_PARAMETERS, |
| .min_size = sizeof(struct bdb_compression_parameters), }, |
| { .section_id = BDB_GENERIC_DTD, |
| .min_size = sizeof(struct bdb_generic_dtd), }, |
| }; |
| |
| static size_t lfp_data_min_size(struct intel_display *display) |
| { |
| const struct bdb_lfp_data_ptrs *ptrs; |
| size_t size; |
| |
| ptrs = bdb_find_section(display, BDB_LFP_DATA_PTRS); |
| if (!ptrs) |
| return 0; |
| |
| size = sizeof(struct bdb_lfp_data); |
| if (ptrs->panel_name.table_size) |
| size = max(size, ptrs->panel_name.offset + |
| sizeof(struct bdb_lfp_data_tail)); |
| |
| return size; |
| } |
| |
| static bool validate_lfp_data_ptrs(const void *bdb, |
| const struct bdb_lfp_data_ptrs *ptrs) |
| { |
| int fp_timing_size, dvo_timing_size, panel_pnp_id_size, panel_name_size; |
| int data_block_size, lfp_data_size; |
| const void *data_block; |
| int i; |
| |
| data_block = find_raw_section(bdb, BDB_LFP_DATA); |
| if (!data_block) |
| return false; |
| |
| data_block_size = get_blocksize(data_block); |
| if (data_block_size == 0) |
| return false; |
| |
| /* always 3 indicating the presence of fp_timing+dvo_timing+panel_pnp_id */ |
| if (ptrs->num_entries != 3) |
| return false; |
| |
| fp_timing_size = ptrs->ptr[0].fp_timing.table_size; |
| dvo_timing_size = ptrs->ptr[0].dvo_timing.table_size; |
| panel_pnp_id_size = ptrs->ptr[0].panel_pnp_id.table_size; |
| panel_name_size = ptrs->panel_name.table_size; |
| |
| /* fp_timing has variable size */ |
| if (fp_timing_size < 32 || |
| dvo_timing_size != sizeof(struct bdb_edid_dtd) || |
| panel_pnp_id_size != sizeof(struct bdb_edid_pnp_id)) |
| return false; |
| |
| /* panel_name is not present in old VBTs */ |
| if (panel_name_size != 0 && |
| panel_name_size != sizeof(struct bdb_edid_product_name)) |
| return false; |
| |
| lfp_data_size = ptrs->ptr[1].fp_timing.offset - ptrs->ptr[0].fp_timing.offset; |
| if (16 * lfp_data_size > data_block_size) |
| return false; |
| |
| /* make sure the table entries have uniform size */ |
| for (i = 1; i < 16; i++) { |
| if (ptrs->ptr[i].fp_timing.table_size != fp_timing_size || |
| ptrs->ptr[i].dvo_timing.table_size != dvo_timing_size || |
| ptrs->ptr[i].panel_pnp_id.table_size != panel_pnp_id_size) |
| return false; |
| |
| if (ptrs->ptr[i].fp_timing.offset - ptrs->ptr[i-1].fp_timing.offset != lfp_data_size || |
| ptrs->ptr[i].dvo_timing.offset - ptrs->ptr[i-1].dvo_timing.offset != lfp_data_size || |
| ptrs->ptr[i].panel_pnp_id.offset - ptrs->ptr[i-1].panel_pnp_id.offset != lfp_data_size) |
| return false; |
| } |
| |
| /* |
| * Except for vlv/chv machines all real VBTs seem to have 6 |
| * unaccounted bytes in the fp_timing table. And it doesn't |
| * appear to be a really intentional hole as the fp_timing |
| * 0xffff terminator is always within those 6 missing bytes. |
| */ |
| if (fp_timing_size + 6 + dvo_timing_size + panel_pnp_id_size == lfp_data_size) |
| fp_timing_size += 6; |
| |
| if (fp_timing_size + dvo_timing_size + panel_pnp_id_size != lfp_data_size) |
| return false; |
| |
| if (ptrs->ptr[0].fp_timing.offset + fp_timing_size != ptrs->ptr[0].dvo_timing.offset || |
| ptrs->ptr[0].dvo_timing.offset + dvo_timing_size != ptrs->ptr[0].panel_pnp_id.offset || |
| ptrs->ptr[0].panel_pnp_id.offset + panel_pnp_id_size != lfp_data_size) |
| return false; |
| |
| /* make sure the tables fit inside the data block */ |
| for (i = 0; i < 16; i++) { |
| if (ptrs->ptr[i].fp_timing.offset + fp_timing_size > data_block_size || |
| ptrs->ptr[i].dvo_timing.offset + dvo_timing_size > data_block_size || |
| ptrs->ptr[i].panel_pnp_id.offset + panel_pnp_id_size > data_block_size) |
| return false; |
| } |
| |
| if (ptrs->panel_name.offset + 16 * panel_name_size > data_block_size) |
| return false; |
| |
| /* make sure fp_timing terminators are present at expected locations */ |
| for (i = 0; i < 16; i++) { |
| const u16 *t = data_block + ptrs->ptr[i].fp_timing.offset + |
| fp_timing_size - 2; |
| |
| if (*t != 0xffff) |
| return false; |
| } |
| |
| return true; |
| } |
| |
| /* make the data table offsets relative to the data block */ |
| static bool fixup_lfp_data_ptrs(const void *bdb, void *ptrs_block) |
| { |
| struct bdb_lfp_data_ptrs *ptrs = ptrs_block; |
| u32 offset; |
| int i; |
| |
| offset = raw_block_offset(bdb, BDB_LFP_DATA); |
| |
| for (i = 0; i < 16; i++) { |
| if (ptrs->ptr[i].fp_timing.offset < offset || |
| ptrs->ptr[i].dvo_timing.offset < offset || |
| ptrs->ptr[i].panel_pnp_id.offset < offset) |
| return false; |
| |
| ptrs->ptr[i].fp_timing.offset -= offset; |
| ptrs->ptr[i].dvo_timing.offset -= offset; |
| ptrs->ptr[i].panel_pnp_id.offset -= offset; |
| } |
| |
| if (ptrs->panel_name.table_size) { |
| if (ptrs->panel_name.offset < offset) |
| return false; |
| |
| ptrs->panel_name.offset -= offset; |
| } |
| |
| return validate_lfp_data_ptrs(bdb, ptrs); |
| } |
| |
| static int make_lfp_data_ptr(struct lfp_data_ptr_table *table, |
| int table_size, int total_size) |
| { |
| if (total_size < table_size) |
| return total_size; |
| |
| table->table_size = table_size; |
| table->offset = total_size - table_size; |
| |
| return total_size - table_size; |
| } |
| |
| static void next_lfp_data_ptr(struct lfp_data_ptr_table *next, |
| const struct lfp_data_ptr_table *prev, |
| int size) |
| { |
| next->table_size = prev->table_size; |
| next->offset = prev->offset + size; |
| } |
| |
| static void *generate_lfp_data_ptrs(struct intel_display *display, |
| const void *bdb) |
| { |
| int i, size, table_size, block_size, offset, fp_timing_size; |
| struct bdb_lfp_data_ptrs *ptrs; |
| const void *block; |
| void *ptrs_block; |
| |
| /* |
| * The hardcoded fp_timing_size is only valid for |
| * modernish VBTs. All older VBTs definitely should |
| * include block 41 and thus we don't need to |
| * generate one. |
| */ |
| if (display->vbt.version < 155) |
| return NULL; |
| |
| fp_timing_size = 38; |
| |
| block = find_raw_section(bdb, BDB_LFP_DATA); |
| if (!block) |
| return NULL; |
| |
| drm_dbg_kms(display->drm, "Generating LFP data table pointers\n"); |
| |
| block_size = get_blocksize(block); |
| |
| size = fp_timing_size + sizeof(struct bdb_edid_dtd) + |
| sizeof(struct bdb_edid_pnp_id); |
| if (size * 16 > block_size) |
| return NULL; |
| |
| ptrs_block = kzalloc(sizeof(*ptrs) + 3, GFP_KERNEL); |
| if (!ptrs_block) |
| return NULL; |
| |
| *(u8 *)(ptrs_block + 0) = BDB_LFP_DATA_PTRS; |
| *(u16 *)(ptrs_block + 1) = sizeof(*ptrs); |
| ptrs = ptrs_block + 3; |
| |
| table_size = sizeof(struct bdb_edid_pnp_id); |
| size = make_lfp_data_ptr(&ptrs->ptr[0].panel_pnp_id, table_size, size); |
| |
| table_size = sizeof(struct bdb_edid_dtd); |
| size = make_lfp_data_ptr(&ptrs->ptr[0].dvo_timing, table_size, size); |
| |
| table_size = fp_timing_size; |
| size = make_lfp_data_ptr(&ptrs->ptr[0].fp_timing, table_size, size); |
| |
| if (ptrs->ptr[0].fp_timing.table_size) |
| ptrs->num_entries++; |
| if (ptrs->ptr[0].dvo_timing.table_size) |
| ptrs->num_entries++; |
| if (ptrs->ptr[0].panel_pnp_id.table_size) |
| ptrs->num_entries++; |
| |
| if (size != 0 || ptrs->num_entries != 3) { |
| kfree(ptrs_block); |
| return NULL; |
| } |
| |
| size = fp_timing_size + sizeof(struct bdb_edid_dtd) + |
| sizeof(struct bdb_edid_pnp_id); |
| for (i = 1; i < 16; i++) { |
| next_lfp_data_ptr(&ptrs->ptr[i].fp_timing, &ptrs->ptr[i-1].fp_timing, size); |
| next_lfp_data_ptr(&ptrs->ptr[i].dvo_timing, &ptrs->ptr[i-1].dvo_timing, size); |
| next_lfp_data_ptr(&ptrs->ptr[i].panel_pnp_id, &ptrs->ptr[i-1].panel_pnp_id, size); |
| } |
| |
| table_size = sizeof(struct bdb_edid_product_name); |
| |
| if (16 * (size + table_size) <= block_size) { |
| ptrs->panel_name.table_size = table_size; |
| ptrs->panel_name.offset = size * 16; |
| } |
| |
| offset = block - bdb; |
| |
| for (i = 0; i < 16; i++) { |
| ptrs->ptr[i].fp_timing.offset += offset; |
| ptrs->ptr[i].dvo_timing.offset += offset; |
| ptrs->ptr[i].panel_pnp_id.offset += offset; |
| } |
| |
| if (ptrs->panel_name.table_size) |
| ptrs->panel_name.offset += offset; |
| |
| return ptrs_block; |
| } |
| |
| static void |
| init_bdb_block(struct intel_display *display, |
| const void *bdb, enum bdb_block_id section_id, |
| size_t min_size) |
| { |
| struct bdb_block_entry *entry; |
| void *temp_block = NULL; |
| const void *block; |
| size_t block_size; |
| |
| block = find_raw_section(bdb, section_id); |
| |
| /* Modern VBTs lack the LFP data table pointers block, make one up */ |
| if (!block && section_id == BDB_LFP_DATA_PTRS) { |
| temp_block = generate_lfp_data_ptrs(display, bdb); |
| if (temp_block) |
| block = temp_block + 3; |
| } |
| if (!block) |
| return; |
| |
| drm_WARN(display->drm, min_size == 0, |
| "Block %d min_size is zero\n", section_id); |
| |
| block_size = get_blocksize(block); |
| |
| /* |
| * Version number and new block size are considered |
| * part of the header for MIPI sequenece block v3+. |
| */ |
| if (section_id == BDB_MIPI_SEQUENCE && *(const u8 *)block >= 3) |
| block_size += 5; |
| |
| entry = kzalloc(struct_size(entry, data, max(min_size, block_size) + 3), |
| GFP_KERNEL); |
| if (!entry) { |
| kfree(temp_block); |
| return; |
| } |
| |
| entry->section_id = section_id; |
| memcpy(entry->data, block - 3, block_size + 3); |
| |
| kfree(temp_block); |
| |
| drm_dbg_kms(display->drm, |
| "Found BDB block %d (size %zu, min size %zu)\n", |
| section_id, block_size, min_size); |
| |
| if (section_id == BDB_LFP_DATA_PTRS && |
| !fixup_lfp_data_ptrs(bdb, entry->data + 3)) { |
| drm_err(display->drm, |
| "VBT has malformed LFP data table pointers\n"); |
| kfree(entry); |
| return; |
| } |
| |
| list_add_tail(&entry->node, &display->vbt.bdb_blocks); |
| } |
| |
| static void init_bdb_blocks(struct intel_display *display, |
| const void *bdb) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(bdb_blocks); i++) { |
| enum bdb_block_id section_id = bdb_blocks[i].section_id; |
| size_t min_size = bdb_blocks[i].min_size; |
| |
| if (section_id == BDB_LFP_DATA) |
| min_size = lfp_data_min_size(display); |
| |
| init_bdb_block(display, bdb, section_id, min_size); |
| } |
| } |
| |
| static void |
| fill_detail_timing_data(struct intel_display *display, |
| struct drm_display_mode *panel_fixed_mode, |
| const struct bdb_edid_dtd *dvo_timing) |
| { |
| panel_fixed_mode->hdisplay = (dvo_timing->hactive_hi << 8) | |
| dvo_timing->hactive_lo; |
| panel_fixed_mode->hsync_start = panel_fixed_mode->hdisplay + |
| ((dvo_timing->hsync_off_hi << 8) | dvo_timing->hsync_off_lo); |
| panel_fixed_mode->hsync_end = panel_fixed_mode->hsync_start + |
| ((dvo_timing->hsync_pulse_width_hi << 8) | |
| dvo_timing->hsync_pulse_width_lo); |
| panel_fixed_mode->htotal = panel_fixed_mode->hdisplay + |
| ((dvo_timing->hblank_hi << 8) | dvo_timing->hblank_lo); |
| |
| panel_fixed_mode->vdisplay = (dvo_timing->vactive_hi << 8) | |
| dvo_timing->vactive_lo; |
| panel_fixed_mode->vsync_start = panel_fixed_mode->vdisplay + |
| ((dvo_timing->vsync_off_hi << 4) | dvo_timing->vsync_off_lo); |
| panel_fixed_mode->vsync_end = panel_fixed_mode->vsync_start + |
| ((dvo_timing->vsync_pulse_width_hi << 4) | |
| dvo_timing->vsync_pulse_width_lo); |
| panel_fixed_mode->vtotal = panel_fixed_mode->vdisplay + |
| ((dvo_timing->vblank_hi << 8) | dvo_timing->vblank_lo); |
| panel_fixed_mode->clock = dvo_timing->clock * 10; |
| panel_fixed_mode->type = DRM_MODE_TYPE_PREFERRED; |
| |
| if (dvo_timing->hsync_positive) |
| panel_fixed_mode->flags |= DRM_MODE_FLAG_PHSYNC; |
| else |
| panel_fixed_mode->flags |= DRM_MODE_FLAG_NHSYNC; |
| |
| if (dvo_timing->vsync_positive) |
| panel_fixed_mode->flags |= DRM_MODE_FLAG_PVSYNC; |
| else |
| panel_fixed_mode->flags |= DRM_MODE_FLAG_NVSYNC; |
| |
| panel_fixed_mode->width_mm = (dvo_timing->himage_hi << 8) | |
| dvo_timing->himage_lo; |
| panel_fixed_mode->height_mm = (dvo_timing->vimage_hi << 8) | |
| dvo_timing->vimage_lo; |
| |
| /* Some VBTs have bogus h/vsync_end values */ |
| if (panel_fixed_mode->hsync_end > panel_fixed_mode->htotal) { |
| drm_dbg_kms(display->drm, "reducing hsync_end %d->%d\n", |
| panel_fixed_mode->hsync_end, panel_fixed_mode->htotal); |
| panel_fixed_mode->hsync_end = panel_fixed_mode->htotal; |
| } |
| if (panel_fixed_mode->vsync_end > panel_fixed_mode->vtotal) { |
| drm_dbg_kms(display->drm, "reducing vsync_end %d->%d\n", |
| panel_fixed_mode->vsync_end, panel_fixed_mode->vtotal); |
| panel_fixed_mode->vsync_end = panel_fixed_mode->vtotal; |
| } |
| |
| drm_mode_set_name(panel_fixed_mode); |
| } |
| |
| static const struct bdb_edid_dtd * |
| get_lfp_dvo_timing(const struct bdb_lfp_data *data, |
| const struct bdb_lfp_data_ptrs *ptrs, |
| int index) |
| { |
| return (const void *)data + ptrs->ptr[index].dvo_timing.offset; |
| } |
| |
| static const struct fp_timing * |
| get_lfp_fp_timing(const struct bdb_lfp_data *data, |
| const struct bdb_lfp_data_ptrs *ptrs, |
| int index) |
| { |
| return (const void *)data + ptrs->ptr[index].fp_timing.offset; |
| } |
| |
| static const struct drm_edid_product_id * |
| get_lfp_pnp_id(const struct bdb_lfp_data *data, |
| const struct bdb_lfp_data_ptrs *ptrs, |
| int index) |
| { |
| /* These two are supposed to have the same layout in memory. */ |
| BUILD_BUG_ON(sizeof(struct bdb_edid_pnp_id) != sizeof(struct drm_edid_product_id)); |
| |
| return (const void *)data + ptrs->ptr[index].panel_pnp_id.offset; |
| } |
| |
| static const struct bdb_lfp_data_tail * |
| get_lfp_data_tail(const struct bdb_lfp_data *data, |
| const struct bdb_lfp_data_ptrs *ptrs) |
| { |
| if (ptrs->panel_name.table_size) |
| return (const void *)data + ptrs->panel_name.offset; |
| else |
| return NULL; |
| } |
| |
| static int opregion_get_panel_type(struct intel_display *display, |
| const struct intel_bios_encoder_data *devdata, |
| const struct drm_edid *drm_edid, bool use_fallback) |
| { |
| return intel_opregion_get_panel_type(display); |
| } |
| |
| static int vbt_get_panel_type(struct intel_display *display, |
| const struct intel_bios_encoder_data *devdata, |
| const struct drm_edid *drm_edid, bool use_fallback) |
| { |
| const struct bdb_lfp_options *lfp_options; |
| |
| lfp_options = bdb_find_section(display, BDB_LFP_OPTIONS); |
| if (!lfp_options) |
| return -1; |
| |
| if (lfp_options->panel_type > 0xf && |
| lfp_options->panel_type != 0xff) { |
| drm_dbg_kms(display->drm, "Invalid VBT panel type 0x%x\n", |
| lfp_options->panel_type); |
| return -1; |
| } |
| |
| if (devdata && devdata->child.handle == DEVICE_HANDLE_LFP2) |
| return lfp_options->panel_type2; |
| |
| drm_WARN_ON(display->drm, |
| devdata && devdata->child.handle != DEVICE_HANDLE_LFP1); |
| |
| return lfp_options->panel_type; |
| } |
| |
| static int pnpid_get_panel_type(struct intel_display *display, |
| const struct intel_bios_encoder_data *devdata, |
| const struct drm_edid *drm_edid, bool use_fallback) |
| { |
| const struct bdb_lfp_data *data; |
| const struct bdb_lfp_data_ptrs *ptrs; |
| struct drm_edid_product_id product_id, product_id_nodate; |
| struct drm_printer p; |
| int i, best = -1; |
| |
| if (!drm_edid) |
| return -1; |
| |
| drm_edid_get_product_id(drm_edid, &product_id); |
| |
| product_id_nodate = product_id; |
| product_id_nodate.week_of_manufacture = 0; |
| product_id_nodate.year_of_manufacture = 0; |
| |
| p = drm_dbg_printer(display->drm, DRM_UT_KMS, "EDID"); |
| drm_edid_print_product_id(&p, &product_id, true); |
| |
| ptrs = bdb_find_section(display, BDB_LFP_DATA_PTRS); |
| if (!ptrs) |
| return -1; |
| |
| data = bdb_find_section(display, BDB_LFP_DATA); |
| if (!data) |
| return -1; |
| |
| for (i = 0; i < 16; i++) { |
| const struct drm_edid_product_id *vbt_id = |
| get_lfp_pnp_id(data, ptrs, i); |
| |
| /* full match? */ |
| if (!memcmp(vbt_id, &product_id, sizeof(*vbt_id))) |
| return i; |
| |
| /* |
| * Accept a match w/o date if no full match is found, |
| * and the VBT entry does not specify a date. |
| */ |
| if (best < 0 && |
| !memcmp(vbt_id, &product_id_nodate, sizeof(*vbt_id))) |
| best = i; |
| } |
| |
| return best; |
| } |
| |
| static int fallback_get_panel_type(struct intel_display *display, |
| const struct intel_bios_encoder_data *devdata, |
| const struct drm_edid *drm_edid, bool use_fallback) |
| { |
| return use_fallback ? 0 : -1; |
| } |
| |
| enum panel_type { |
| PANEL_TYPE_OPREGION, |
| PANEL_TYPE_VBT, |
| PANEL_TYPE_PNPID, |
| PANEL_TYPE_FALLBACK, |
| }; |
| |
| static int get_panel_type(struct intel_display *display, |
| const struct intel_bios_encoder_data *devdata, |
| const struct drm_edid *drm_edid, bool use_fallback) |
| { |
| struct { |
| const char *name; |
| int (*get_panel_type)(struct intel_display *display, |
| const struct intel_bios_encoder_data *devdata, |
| const struct drm_edid *drm_edid, bool use_fallback); |
| int panel_type; |
| } panel_types[] = { |
| [PANEL_TYPE_OPREGION] = { |
| .name = "OpRegion", |
| .get_panel_type = opregion_get_panel_type, |
| }, |
| [PANEL_TYPE_VBT] = { |
| .name = "VBT", |
| .get_panel_type = vbt_get_panel_type, |
| }, |
| [PANEL_TYPE_PNPID] = { |
| .name = "PNPID", |
| .get_panel_type = pnpid_get_panel_type, |
| }, |
| [PANEL_TYPE_FALLBACK] = { |
| .name = "fallback", |
| .get_panel_type = fallback_get_panel_type, |
| }, |
| }; |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(panel_types); i++) { |
| panel_types[i].panel_type = panel_types[i].get_panel_type(display, devdata, |
| drm_edid, use_fallback); |
| |
| drm_WARN_ON(display->drm, panel_types[i].panel_type > 0xf && |
| panel_types[i].panel_type != 0xff); |
| |
| if (panel_types[i].panel_type >= 0) |
| drm_dbg_kms(display->drm, "Panel type (%s): %d\n", |
| panel_types[i].name, panel_types[i].panel_type); |
| } |
| |
| if (panel_types[PANEL_TYPE_OPREGION].panel_type >= 0) |
| i = PANEL_TYPE_OPREGION; |
| else if (panel_types[PANEL_TYPE_VBT].panel_type == 0xff && |
| panel_types[PANEL_TYPE_PNPID].panel_type >= 0) |
| i = PANEL_TYPE_PNPID; |
| else if (panel_types[PANEL_TYPE_VBT].panel_type != 0xff && |
| panel_types[PANEL_TYPE_VBT].panel_type >= 0) |
| i = PANEL_TYPE_VBT; |
| else |
| i = PANEL_TYPE_FALLBACK; |
| |
| drm_dbg_kms(display->drm, "Selected panel type (%s): %d\n", |
| panel_types[i].name, panel_types[i].panel_type); |
| |
| return panel_types[i].panel_type; |
| } |
| |
| static unsigned int panel_bits(unsigned int value, int panel_type, int num_bits) |
| { |
| return (value >> (panel_type * num_bits)) & (BIT(num_bits) - 1); |
| } |
| |
| static bool panel_bool(unsigned int value, int panel_type) |
| { |
| return panel_bits(value, panel_type, 1); |
| } |
| |
| /* Parse general panel options */ |
| static void |
| parse_panel_options(struct intel_display *display, |
| struct intel_panel *panel) |
| { |
| const struct bdb_lfp_options *lfp_options; |
| int panel_type = panel->vbt.panel_type; |
| int drrs_mode; |
| |
| lfp_options = bdb_find_section(display, BDB_LFP_OPTIONS); |
| if (!lfp_options) |
| return; |
| |
| panel->vbt.lvds_dither = lfp_options->pixel_dither; |
| |
| /* |
| * Empirical evidence indicates the block size can be |
| * either 4,14,16,24+ bytes. For older VBTs no clear |
| * relationship between the block size vs. BDB version. |
| */ |
| if (get_blocksize(lfp_options) < 16) |
| return; |
| |
| drrs_mode = panel_bits(lfp_options->dps_panel_type_bits, |
| panel_type, 2); |
| /* |
| * VBT has static DRRS = 0 and seamless DRRS = 2. |
| * The below piece of code is required to adjust vbt.drrs_type |
| * to match the enum drrs_support_type. |
| */ |
| switch (drrs_mode) { |
| case 0: |
| panel->vbt.drrs_type = DRRS_TYPE_STATIC; |
| drm_dbg_kms(display->drm, "DRRS supported mode is static\n"); |
| break; |
| case 2: |
| panel->vbt.drrs_type = DRRS_TYPE_SEAMLESS; |
| drm_dbg_kms(display->drm, |
| "DRRS supported mode is seamless\n"); |
| break; |
| default: |
| panel->vbt.drrs_type = DRRS_TYPE_NONE; |
| drm_dbg_kms(display->drm, |
| "DRRS not supported (VBT input)\n"); |
| break; |
| } |
| } |
| |
| static void |
| parse_lfp_panel_dtd(struct intel_display *display, |
| struct intel_panel *panel, |
| const struct bdb_lfp_data *lfp_data, |
| const struct bdb_lfp_data_ptrs *lfp_data_ptrs) |
| { |
| const struct bdb_edid_dtd *panel_dvo_timing; |
| const struct fp_timing *fp_timing; |
| struct drm_display_mode *panel_fixed_mode; |
| int panel_type = panel->vbt.panel_type; |
| |
| panel_dvo_timing = get_lfp_dvo_timing(lfp_data, |
| lfp_data_ptrs, |
| panel_type); |
| |
| panel_fixed_mode = kzalloc(sizeof(*panel_fixed_mode), GFP_KERNEL); |
| if (!panel_fixed_mode) |
| return; |
| |
| fill_detail_timing_data(display, panel_fixed_mode, panel_dvo_timing); |
| |
| panel->vbt.lfp_vbt_mode = panel_fixed_mode; |
| |
| drm_dbg_kms(display->drm, |
| "Found panel mode in BIOS VBT legacy lfp table: " DRM_MODE_FMT "\n", |
| DRM_MODE_ARG(panel_fixed_mode)); |
| |
| fp_timing = get_lfp_fp_timing(lfp_data, |
| lfp_data_ptrs, |
| panel_type); |
| |
| /* check the resolution, just to be sure */ |
| if (fp_timing->x_res == panel_fixed_mode->hdisplay && |
| fp_timing->y_res == panel_fixed_mode->vdisplay) { |
| panel->vbt.bios_lvds_val = fp_timing->lvds_reg_val; |
| drm_dbg_kms(display->drm, |
| "VBT initial LVDS value %x\n", |
| panel->vbt.bios_lvds_val); |
| } |
| } |
| |
| static void |
| parse_lfp_data(struct intel_display *display, |
| struct intel_panel *panel) |
| { |
| const struct bdb_lfp_data *data; |
| const struct bdb_lfp_data_tail *tail; |
| const struct bdb_lfp_data_ptrs *ptrs; |
| const struct drm_edid_product_id *pnp_id; |
| struct drm_printer p; |
| int panel_type = panel->vbt.panel_type; |
| |
| ptrs = bdb_find_section(display, BDB_LFP_DATA_PTRS); |
| if (!ptrs) |
| return; |
| |
| data = bdb_find_section(display, BDB_LFP_DATA); |
| if (!data) |
| return; |
| |
| if (!panel->vbt.lfp_vbt_mode) |
| parse_lfp_panel_dtd(display, panel, data, ptrs); |
| |
| pnp_id = get_lfp_pnp_id(data, ptrs, panel_type); |
| |
| p = drm_dbg_printer(display->drm, DRM_UT_KMS, "Panel"); |
| drm_edid_print_product_id(&p, pnp_id, false); |
| |
| tail = get_lfp_data_tail(data, ptrs); |
| if (!tail) |
| return; |
| |
| drm_dbg_kms(display->drm, "Panel name: %.*s\n", |
| (int)sizeof(tail->panel_name[0].name), |
| tail->panel_name[panel_type].name); |
| |
| if (display->vbt.version >= 188) { |
| panel->vbt.seamless_drrs_min_refresh_rate = |
| tail->seamless_drrs_min_refresh_rate[panel_type]; |
| drm_dbg_kms(display->drm, |
| "Seamless DRRS min refresh rate: %d Hz\n", |
| panel->vbt.seamless_drrs_min_refresh_rate); |
| } |
| } |
| |
| static void |
| parse_generic_dtd(struct intel_display *display, |
| struct intel_panel *panel) |
| { |
| const struct bdb_generic_dtd *generic_dtd; |
| const struct generic_dtd_entry *dtd; |
| struct drm_display_mode *panel_fixed_mode; |
| int num_dtd; |
| |
| /* |
| * Older VBTs provided DTD information for internal displays through |
| * the "LFP panel tables" block (42). As of VBT revision 229 the |
| * DTD information should be provided via a newer "generic DTD" |
| * block (58). Just to be safe, we'll try the new generic DTD block |
| * first on VBT >= 229, but still fall back to trying the old LFP |
| * block if that fails. |
| */ |
| if (display->vbt.version < 229) |
| return; |
| |
| generic_dtd = bdb_find_section(display, BDB_GENERIC_DTD); |
| if (!generic_dtd) |
| return; |
| |
| if (generic_dtd->gdtd_size < sizeof(struct generic_dtd_entry)) { |
| drm_err(display->drm, "GDTD size %u is too small.\n", |
| generic_dtd->gdtd_size); |
| return; |
| } else if (generic_dtd->gdtd_size != |
| sizeof(struct generic_dtd_entry)) { |
| drm_err(display->drm, "Unexpected GDTD size %u\n", |
| generic_dtd->gdtd_size); |
| /* DTD has unknown fields, but keep going */ |
| } |
| |
| num_dtd = (get_blocksize(generic_dtd) - |
| sizeof(struct bdb_generic_dtd)) / generic_dtd->gdtd_size; |
| if (panel->vbt.panel_type >= num_dtd) { |
| drm_err(display->drm, |
| "Panel type %d not found in table of %d DTD's\n", |
| panel->vbt.panel_type, num_dtd); |
| return; |
| } |
| |
| dtd = &generic_dtd->dtd[panel->vbt.panel_type]; |
| |
| panel_fixed_mode = kzalloc(sizeof(*panel_fixed_mode), GFP_KERNEL); |
| if (!panel_fixed_mode) |
| return; |
| |
| panel_fixed_mode->hdisplay = dtd->hactive; |
| panel_fixed_mode->hsync_start = |
| panel_fixed_mode->hdisplay + dtd->hfront_porch; |
| panel_fixed_mode->hsync_end = |
| panel_fixed_mode->hsync_start + dtd->hsync; |
| panel_fixed_mode->htotal = |
| panel_fixed_mode->hdisplay + dtd->hblank; |
| |
| panel_fixed_mode->vdisplay = dtd->vactive; |
| panel_fixed_mode->vsync_start = |
| panel_fixed_mode->vdisplay + dtd->vfront_porch; |
| panel_fixed_mode->vsync_end = |
| panel_fixed_mode->vsync_start + dtd->vsync; |
| panel_fixed_mode->vtotal = |
| panel_fixed_mode->vdisplay + dtd->vblank; |
| |
| panel_fixed_mode->clock = dtd->pixel_clock; |
| panel_fixed_mode->width_mm = dtd->width_mm; |
| panel_fixed_mode->height_mm = dtd->height_mm; |
| |
| panel_fixed_mode->type = DRM_MODE_TYPE_PREFERRED; |
| drm_mode_set_name(panel_fixed_mode); |
| |
| if (dtd->hsync_positive_polarity) |
| panel_fixed_mode->flags |= DRM_MODE_FLAG_PHSYNC; |
| else |
| panel_fixed_mode->flags |= DRM_MODE_FLAG_NHSYNC; |
| |
| if (dtd->vsync_positive_polarity) |
| panel_fixed_mode->flags |= DRM_MODE_FLAG_PVSYNC; |
| else |
| panel_fixed_mode->flags |= DRM_MODE_FLAG_NVSYNC; |
| |
| drm_dbg_kms(display->drm, |
| "Found panel mode in BIOS VBT generic dtd table: " DRM_MODE_FMT "\n", |
| DRM_MODE_ARG(panel_fixed_mode)); |
| |
| panel->vbt.lfp_vbt_mode = panel_fixed_mode; |
| } |
| |
| static void |
| parse_lfp_backlight(struct intel_display *display, |
| struct intel_panel *panel) |
| { |
| const struct bdb_lfp_backlight *backlight_data; |
| const struct lfp_backlight_data_entry *entry; |
| int panel_type = panel->vbt.panel_type; |
| u16 level; |
| |
| backlight_data = bdb_find_section(display, BDB_LFP_BACKLIGHT); |
| if (!backlight_data) |
| return; |
| |
| if (backlight_data->entry_size != sizeof(backlight_data->data[0])) { |
| drm_dbg_kms(display->drm, |
| "Unsupported backlight data entry size %u\n", |
| backlight_data->entry_size); |
| return; |
| } |
| |
| entry = &backlight_data->data[panel_type]; |
| |
| panel->vbt.backlight.present = entry->type == BDB_BACKLIGHT_TYPE_PWM; |
| if (!panel->vbt.backlight.present) { |
| drm_dbg_kms(display->drm, |
| "PWM backlight not present in VBT (type %u)\n", |
| entry->type); |
| return; |
| } |
| |
| panel->vbt.backlight.type = INTEL_BACKLIGHT_DISPLAY_DDI; |
| panel->vbt.backlight.controller = 0; |
| if (display->vbt.version >= 191) { |
| const struct lfp_backlight_control_method *method; |
| |
| method = &backlight_data->backlight_control[panel_type]; |
| panel->vbt.backlight.type = method->type; |
| panel->vbt.backlight.controller = method->controller; |
| } |
| |
| panel->vbt.backlight.pwm_freq_hz = entry->pwm_freq_hz; |
| panel->vbt.backlight.active_low_pwm = entry->active_low_pwm; |
| |
| if (display->vbt.version >= 234) { |
| u16 min_level; |
| bool scale; |
| |
| level = backlight_data->brightness_level[panel_type].level; |
| min_level = backlight_data->brightness_min_level[panel_type].level; |
| |
| if (display->vbt.version >= 236) |
| scale = backlight_data->brightness_precision_bits[panel_type] == 16; |
| else |
| scale = level > 255; |
| |
| if (scale) |
| min_level = min_level / 255; |
| |
| if (min_level > 255) { |
| drm_warn(display->drm, "Brightness min level > 255\n"); |
| level = 255; |
| } |
| panel->vbt.backlight.min_brightness = min_level; |
| |
| panel->vbt.backlight.brightness_precision_bits = |
| backlight_data->brightness_precision_bits[panel_type]; |
| } else { |
| level = backlight_data->level[panel_type]; |
| panel->vbt.backlight.min_brightness = entry->min_brightness; |
| } |
| |
| if (display->vbt.version >= 239) |
| panel->vbt.backlight.hdr_dpcd_refresh_timeout = |
| DIV_ROUND_UP(backlight_data->hdr_dpcd_refresh_timeout[panel_type], 100); |
| else |
| panel->vbt.backlight.hdr_dpcd_refresh_timeout = 30; |
| |
| drm_dbg_kms(display->drm, |
| "VBT backlight PWM modulation frequency %u Hz, " |
| "active %s, min brightness %u, level %u, controller %u\n", |
| panel->vbt.backlight.pwm_freq_hz, |
| panel->vbt.backlight.active_low_pwm ? "low" : "high", |
| panel->vbt.backlight.min_brightness, |
| level, |
| panel->vbt.backlight.controller); |
| } |
| |
| static void |
| parse_sdvo_lvds_data(struct intel_display *display, |
| struct intel_panel *panel) |
| { |
| const struct bdb_sdvo_lvds_dtd *dtd; |
| struct drm_display_mode *panel_fixed_mode; |
| int index; |
| |
| index = display->params.vbt_sdvo_panel_type; |
| if (index == -2) { |
| drm_dbg_kms(display->drm, |
| "Ignore SDVO LVDS mode from BIOS VBT tables.\n"); |
| return; |
| } |
| |
| if (index == -1) { |
| const struct bdb_sdvo_lvds_options *sdvo_lvds_options; |
| |
| sdvo_lvds_options = bdb_find_section(display, BDB_SDVO_LVDS_OPTIONS); |
| if (!sdvo_lvds_options) |
| return; |
| |
| index = sdvo_lvds_options->panel_type; |
| } |
| |
| dtd = bdb_find_section(display, BDB_SDVO_LVDS_DTD); |
| if (!dtd) |
| return; |
| |
| /* |
| * This should not happen, as long as the panel_type |
| * enumeration doesn't grow over 4 items. But if it does, it |
| * could lead to hard-to-detect bugs, so better double-check |
| * it here to be sure. |
| */ |
| if (index >= ARRAY_SIZE(dtd->dtd)) { |
| drm_err(display->drm, |
| "index %d is larger than dtd->dtd[4] array\n", |
| index); |
| return; |
| } |
| |
| panel_fixed_mode = kzalloc(sizeof(*panel_fixed_mode), GFP_KERNEL); |
| if (!panel_fixed_mode) |
| return; |
| |
| fill_detail_timing_data(display, panel_fixed_mode, &dtd->dtd[index]); |
| |
| panel->vbt.sdvo_lvds_vbt_mode = panel_fixed_mode; |
| |
| drm_dbg_kms(display->drm, |
| "Found SDVO LVDS mode in BIOS VBT tables: " DRM_MODE_FMT "\n", |
| DRM_MODE_ARG(panel_fixed_mode)); |
| } |
| |
| static int intel_bios_ssc_frequency(struct intel_display *display, |
| bool alternate) |
| { |
| switch (DISPLAY_VER(display)) { |
| case 2: |
| return alternate ? 66667 : 48000; |
| case 3: |
| case 4: |
| return alternate ? 100000 : 96000; |
| default: |
| return alternate ? 100000 : 120000; |
| } |
| } |
| |
| static void |
| parse_general_features(struct intel_display *display) |
| { |
| struct drm_i915_private *i915 = to_i915(display->drm); |
| const struct bdb_general_features *general; |
| |
| general = bdb_find_section(display, BDB_GENERAL_FEATURES); |
| if (!general) |
| return; |
| |
| display->vbt.int_tv_support = general->int_tv_support; |
| /* int_crt_support can't be trusted on earlier platforms */ |
| if (display->vbt.version >= 155 && |
| (HAS_DDI(display) || IS_VALLEYVIEW(i915))) |
| display->vbt.int_crt_support = general->int_crt_support; |
| display->vbt.lvds_use_ssc = general->enable_ssc; |
| display->vbt.lvds_ssc_freq = |
| intel_bios_ssc_frequency(display, general->ssc_freq); |
| display->vbt.display_clock_mode = general->display_clock_mode; |
| display->vbt.fdi_rx_polarity_inverted = general->fdi_rx_polarity_inverted; |
| if (display->vbt.version >= 181) { |
| display->vbt.orientation = general->rotate_180 ? |
| DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP : |
| DRM_MODE_PANEL_ORIENTATION_NORMAL; |
| } else { |
| display->vbt.orientation = DRM_MODE_PANEL_ORIENTATION_UNKNOWN; |
| } |
| |
| if (display->vbt.version >= 249 && general->afc_startup_config) { |
| display->vbt.override_afc_startup = true; |
| display->vbt.override_afc_startup_val = general->afc_startup_config == 1 ? 0 : 7; |
| } |
| |
| drm_dbg_kms(display->drm, |
| "BDB_GENERAL_FEATURES int_tv_support %d int_crt_support %d lvds_use_ssc %d lvds_ssc_freq %d display_clock_mode %d fdi_rx_polarity_inverted %d\n", |
| display->vbt.int_tv_support, |
| display->vbt.int_crt_support, |
| display->vbt.lvds_use_ssc, |
| display->vbt.lvds_ssc_freq, |
| display->vbt.display_clock_mode, |
| display->vbt.fdi_rx_polarity_inverted); |
| } |
| |
| static const struct child_device_config * |
| child_device_ptr(const struct bdb_general_definitions *defs, int i) |
| { |
| return (const void *) &defs->devices[i * defs->child_dev_size]; |
| } |
| |
| static void |
| parse_sdvo_device_mapping(struct intel_display *display) |
| { |
| const struct intel_bios_encoder_data *devdata; |
| int count = 0; |
| |
| /* |
| * Only parse SDVO mappings on gens that could have SDVO. This isn't |
| * accurate and doesn't have to be, as long as it's not too strict. |
| */ |
| if (!IS_DISPLAY_VER(display, 3, 7)) { |
| drm_dbg_kms(display->drm, "Skipping SDVO device mapping\n"); |
| return; |
| } |
| |
| list_for_each_entry(devdata, &display->vbt.display_devices, node) { |
| const struct child_device_config *child = &devdata->child; |
| struct sdvo_device_mapping *mapping; |
| |
| if (child->target_addr != TARGET_ADDR1 && |
| child->target_addr != TARGET_ADDR2) { |
| /* |
| * If the target address is neither 0x70 nor 0x72, |
| * it is not a SDVO device. Skip it. |
| */ |
| continue; |
| } |
| if (child->dvo_port != DEVICE_PORT_DVOB && |
| child->dvo_port != DEVICE_PORT_DVOC) { |
| /* skip the incorrect SDVO port */ |
| drm_dbg_kms(display->drm, |
| "Incorrect SDVO port. Skip it\n"); |
| continue; |
| } |
| drm_dbg_kms(display->drm, |
| "the SDVO device with target addr %2x is found on" |
| " %s port\n", |
| child->target_addr, |
| (child->dvo_port == DEVICE_PORT_DVOB) ? |
| "SDVOB" : "SDVOC"); |
| mapping = &display->vbt.sdvo_mappings[child->dvo_port - 1]; |
| if (!mapping->initialized) { |
| mapping->dvo_port = child->dvo_port; |
| mapping->target_addr = child->target_addr; |
| mapping->dvo_wiring = child->dvo_wiring; |
| mapping->ddc_pin = child->ddc_pin; |
| mapping->i2c_pin = child->i2c_pin; |
| mapping->initialized = 1; |
| drm_dbg_kms(display->drm, |
| "SDVO device: dvo=%x, addr=%x, wiring=%d, ddc_pin=%d, i2c_pin=%d\n", |
| mapping->dvo_port, mapping->target_addr, |
| mapping->dvo_wiring, mapping->ddc_pin, |
| mapping->i2c_pin); |
| } else { |
| drm_dbg_kms(display->drm, |
| "Maybe one SDVO port is shared by " |
| "two SDVO device.\n"); |
| } |
| if (child->target2_addr) { |
| /* Maybe this is a SDVO device with multiple inputs */ |
| /* And the mapping info is not added */ |
| drm_dbg_kms(display->drm, |
| "there exists the target2_addr. Maybe this" |
| " is a SDVO device with multiple inputs.\n"); |
| } |
| count++; |
| } |
| |
| if (!count) { |
| /* No SDVO device info is found */ |
| drm_dbg_kms(display->drm, |
| "No SDVO device info is found in VBT\n"); |
| } |
| } |
| |
| static void |
| parse_driver_features(struct intel_display *display) |
| { |
| const struct bdb_driver_features *driver; |
| |
| driver = bdb_find_section(display, BDB_DRIVER_FEATURES); |
| if (!driver) |
| return; |
| |
| if (DISPLAY_VER(display) >= 5) { |
| /* |
| * Note that we consider BDB_DRIVER_FEATURE_INT_SDVO_LVDS |
| * to mean "eDP". The VBT spec doesn't agree with that |
| * interpretation, but real world VBTs seem to. |
| */ |
| if (driver->lvds_config != BDB_DRIVER_FEATURE_INT_LVDS) |
| display->vbt.int_lvds_support = 0; |
| } else { |
| /* |
| * FIXME it's not clear which BDB version has the LVDS config |
| * bits defined. Revision history in the VBT spec says: |
| * "0.92 | Add two definitions for VBT value of LVDS Active |
| * Config (00b and 11b values defined) | 06/13/2005" |
| * but does not the specify the BDB version. |
| * |
| * So far version 134 (on i945gm) is the oldest VBT observed |
| * in the wild with the bits correctly populated. Version |
| * 108 (on i85x) does not have the bits correctly populated. |
| */ |
| if (display->vbt.version >= 134 && |
| driver->lvds_config != BDB_DRIVER_FEATURE_INT_LVDS && |
| driver->lvds_config != BDB_DRIVER_FEATURE_INT_SDVO_LVDS) |
| display->vbt.int_lvds_support = 0; |
| } |
| } |
| |
| static void |
| parse_panel_driver_features(struct intel_display *display, |
| struct intel_panel *panel) |
| { |
| const struct bdb_driver_features *driver; |
| |
| driver = bdb_find_section(display, BDB_DRIVER_FEATURES); |
| if (!driver) |
| return; |
| |
| if (display->vbt.version < 228) { |
| drm_dbg_kms(display->drm, "DRRS State Enabled:%d\n", |
| driver->drrs_enabled); |
| /* |
| * If DRRS is not supported, drrs_type has to be set to 0. |
| * This is because, VBT is configured in such a way that |
| * static DRRS is 0 and DRRS not supported is represented by |
| * driver->drrs_enabled=false |
| */ |
| if (!driver->drrs_enabled && panel->vbt.drrs_type != DRRS_TYPE_NONE) { |
| /* |
| * FIXME Should DMRRS perhaps be treated as seamless |
| * but without the automatic downclocking? |
| */ |
| if (driver->dmrrs_enabled) |
| panel->vbt.drrs_type = DRRS_TYPE_STATIC; |
| else |
| panel->vbt.drrs_type = DRRS_TYPE_NONE; |
| } |
| |
| panel->vbt.psr.enable = driver->psr_enabled; |
| } |
| } |
| |
| static void |
| parse_power_conservation_features(struct intel_display *display, |
| struct intel_panel *panel) |
| { |
| const struct bdb_lfp_power *power; |
| u8 panel_type = panel->vbt.panel_type; |
| |
| panel->vbt.vrr = true; /* matches Windows behaviour */ |
| |
| if (display->vbt.version < 228) |
| return; |
| |
| power = bdb_find_section(display, BDB_LFP_POWER); |
| if (!power) |
| return; |
| |
| panel->vbt.psr.enable = panel_bool(power->psr, panel_type); |
| |
| /* |
| * If DRRS is not supported, drrs_type has to be set to 0. |
| * This is because, VBT is configured in such a way that |
| * static DRRS is 0 and DRRS not supported is represented by |
| * power->drrs & BIT(panel_type)=false |
| */ |
| if (!panel_bool(power->drrs, panel_type) && panel->vbt.drrs_type != DRRS_TYPE_NONE) { |
| /* |
| * FIXME Should DMRRS perhaps be treated as seamless |
| * but without the automatic downclocking? |
| */ |
| if (panel_bool(power->dmrrs, panel_type)) |
| panel->vbt.drrs_type = DRRS_TYPE_STATIC; |
| else |
| panel->vbt.drrs_type = DRRS_TYPE_NONE; |
| } |
| |
| if (display->vbt.version >= 232) |
| panel->vbt.edp.hobl = panel_bool(power->hobl, panel_type); |
| |
| if (display->vbt.version >= 233) |
| panel->vbt.vrr = panel_bool(power->vrr_feature_enabled, |
| panel_type); |
| } |
| |
| static void |
| parse_edp(struct intel_display *display, |
| struct intel_panel *panel) |
| { |
| const struct bdb_edp *edp; |
| const struct edp_power_seq *edp_pps; |
| const struct edp_fast_link_params *edp_link_params; |
| int panel_type = panel->vbt.panel_type; |
| |
| edp = bdb_find_section(display, BDB_EDP); |
| if (!edp) |
| return; |
| |
| switch (panel_bits(edp->color_depth, panel_type, 2)) { |
| case EDP_18BPP: |
| panel->vbt.edp.bpp = 18; |
| break; |
| case EDP_24BPP: |
| panel->vbt.edp.bpp = 24; |
| break; |
| case EDP_30BPP: |
| panel->vbt.edp.bpp = 30; |
| break; |
| } |
| |
| /* Get the eDP sequencing and link info */ |
| edp_pps = &edp->power_seqs[panel_type]; |
| edp_link_params = &edp->fast_link_params[panel_type]; |
| |
| panel->vbt.edp.pps = *edp_pps; |
| |
| if (display->vbt.version >= 224) { |
| panel->vbt.edp.rate = |
| edp->edp_fast_link_training_rate[panel_type] * 20; |
| } else { |
| switch (edp_link_params->rate) { |
| case EDP_RATE_1_62: |
| panel->vbt.edp.rate = 162000; |
| break; |
| case EDP_RATE_2_7: |
| panel->vbt.edp.rate = 270000; |
| break; |
| case EDP_RATE_5_4: |
| panel->vbt.edp.rate = 540000; |
| break; |
| default: |
| drm_dbg_kms(display->drm, |
| "VBT has unknown eDP link rate value %u\n", |
| edp_link_params->rate); |
| break; |
| } |
| } |
| |
| switch (edp_link_params->lanes) { |
| case EDP_LANE_1: |
| panel->vbt.edp.lanes = 1; |
| break; |
| case EDP_LANE_2: |
| panel->vbt.edp.lanes = 2; |
| break; |
| case EDP_LANE_4: |
| panel->vbt.edp.lanes = 4; |
| break; |
| default: |
| drm_dbg_kms(display->drm, |
| "VBT has unknown eDP lane count value %u\n", |
| edp_link_params->lanes); |
| break; |
| } |
| |
| switch (edp_link_params->preemphasis) { |
| case EDP_PREEMPHASIS_NONE: |
| panel->vbt.edp.preemphasis = DP_TRAIN_PRE_EMPH_LEVEL_0; |
| break; |
| case EDP_PREEMPHASIS_3_5dB: |
| panel->vbt.edp.preemphasis = DP_TRAIN_PRE_EMPH_LEVEL_1; |
| break; |
| case EDP_PREEMPHASIS_6dB: |
| panel->vbt.edp.preemphasis = DP_TRAIN_PRE_EMPH_LEVEL_2; |
| break; |
| case EDP_PREEMPHASIS_9_5dB: |
| panel->vbt.edp.preemphasis = DP_TRAIN_PRE_EMPH_LEVEL_3; |
| break; |
| default: |
| drm_dbg_kms(display->drm, |
| "VBT has unknown eDP pre-emphasis value %u\n", |
| edp_link_params->preemphasis); |
| break; |
| } |
| |
| switch (edp_link_params->vswing) { |
| case EDP_VSWING_0_4V: |
| panel->vbt.edp.vswing = DP_TRAIN_VOLTAGE_SWING_LEVEL_0; |
| break; |
| case EDP_VSWING_0_6V: |
| panel->vbt.edp.vswing = DP_TRAIN_VOLTAGE_SWING_LEVEL_1; |
| break; |
| case EDP_VSWING_0_8V: |
| panel->vbt.edp.vswing = DP_TRAIN_VOLTAGE_SWING_LEVEL_2; |
| break; |
| case EDP_VSWING_1_2V: |
| panel->vbt.edp.vswing = DP_TRAIN_VOLTAGE_SWING_LEVEL_3; |
| break; |
| default: |
| drm_dbg_kms(display->drm, |
| "VBT has unknown eDP voltage swing value %u\n", |
| edp_link_params->vswing); |
| break; |
| } |
| |
| if (display->vbt.version >= 173) { |
| u8 vswing; |
| |
| /* Don't read from VBT if module parameter has valid value*/ |
| if (display->params.edp_vswing) { |
| panel->vbt.edp.low_vswing = |
| display->params.edp_vswing == 1; |
| } else { |
| vswing = (edp->edp_vswing_preemph >> (panel_type * 4)) & 0xF; |
| panel->vbt.edp.low_vswing = vswing == 0; |
| } |
| } |
| |
| panel->vbt.edp.drrs_msa_timing_delay = |
| panel_bits(edp->sdrrs_msa_timing_delay, panel_type, 2); |
| |
| if (display->vbt.version >= 244) |
| panel->vbt.edp.max_link_rate = |
| edp->edp_max_port_link_rate[panel_type] * 20; |
| |
| if (display->vbt.version >= 251) |
| panel->vbt.edp.dsc_disable = |
| panel_bool(edp->edp_dsc_disable, panel_type); |
| } |
| |
| static void |
| parse_psr(struct intel_display *display, |
| struct intel_panel *panel) |
| { |
| struct drm_i915_private *i915 = to_i915(display->drm); |
| const struct bdb_psr *psr; |
| const struct psr_table *psr_table; |
| int panel_type = panel->vbt.panel_type; |
| |
| psr = bdb_find_section(display, BDB_PSR); |
| if (!psr) { |
| drm_dbg_kms(display->drm, "No PSR BDB found.\n"); |
| return; |
| } |
| |
| psr_table = &psr->psr_table[panel_type]; |
| |
| panel->vbt.psr.full_link = psr_table->full_link; |
| panel->vbt.psr.require_aux_wakeup = psr_table->require_aux_to_wakeup; |
| |
| /* Allowed VBT values goes from 0 to 15 */ |
| panel->vbt.psr.idle_frames = psr_table->idle_frames < 0 ? 0 : |
| psr_table->idle_frames > 15 ? 15 : psr_table->idle_frames; |
| |
| /* |
| * New psr options 0=500us, 1=100us, 2=2500us, 3=0us |
| * Old decimal value is wake up time in multiples of 100 us. |
| */ |
| if (display->vbt.version >= 205 && |
| (DISPLAY_VER(display) >= 9 && !IS_BROXTON(i915))) { |
| switch (psr_table->tp1_wakeup_time) { |
| case 0: |
| panel->vbt.psr.tp1_wakeup_time_us = 500; |
| break; |
| case 1: |
| panel->vbt.psr.tp1_wakeup_time_us = 100; |
| break; |
| case 3: |
| panel->vbt.psr.tp1_wakeup_time_us = 0; |
| break; |
| default: |
| drm_dbg_kms(display->drm, |
| "VBT tp1 wakeup time value %d is outside range[0-3], defaulting to max value 2500us\n", |
| psr_table->tp1_wakeup_time); |
| fallthrough; |
| case 2: |
| panel->vbt.psr.tp1_wakeup_time_us = 2500; |
| break; |
| } |
| |
| switch (psr_table->tp2_tp3_wakeup_time) { |
| case 0: |
| panel->vbt.psr.tp2_tp3_wakeup_time_us = 500; |
| break; |
| case 1: |
| panel->vbt.psr.tp2_tp3_wakeup_time_us = 100; |
| break; |
| case 3: |
| panel->vbt.psr.tp2_tp3_wakeup_time_us = 0; |
| break; |
| default: |
| drm_dbg_kms(display->drm, |
| "VBT tp2_tp3 wakeup time value %d is outside range[0-3], defaulting to max value 2500us\n", |
| psr_table->tp2_tp3_wakeup_time); |
| fallthrough; |
| case 2: |
| panel->vbt.psr.tp2_tp3_wakeup_time_us = 2500; |
| break; |
| } |
| } else { |
| panel->vbt.psr.tp1_wakeup_time_us = psr_table->tp1_wakeup_time * 100; |
| panel->vbt.psr.tp2_tp3_wakeup_time_us = psr_table->tp2_tp3_wakeup_time * 100; |
| } |
| |
| if (display->vbt.version >= 226) { |
| u32 wakeup_time = psr->psr2_tp2_tp3_wakeup_time; |
| |
| wakeup_time = panel_bits(wakeup_time, panel_type, 2); |
| switch (wakeup_time) { |
| case 0: |
| wakeup_time = 500; |
| break; |
| case 1: |
| wakeup_time = 100; |
| break; |
| case 3: |
| wakeup_time = 50; |
| break; |
| default: |
| case 2: |
| wakeup_time = 2500; |
| break; |
| } |
| panel->vbt.psr.psr2_tp2_tp3_wakeup_time_us = wakeup_time; |
| } else { |
| /* Reusing PSR1 wakeup time for PSR2 in older VBTs */ |
| panel->vbt.psr.psr2_tp2_tp3_wakeup_time_us = panel->vbt.psr.tp2_tp3_wakeup_time_us; |
| } |
| } |
| |
| static void parse_dsi_backlight_ports(struct intel_display *display, |
| struct intel_panel *panel, |
| enum port port) |
| { |
| enum port port_bc = DISPLAY_VER(display) >= 11 ? PORT_B : PORT_C; |
| |
| if (!panel->vbt.dsi.config->dual_link || display->vbt.version < 197) { |
| panel->vbt.dsi.bl_ports = BIT(port); |
| if (panel->vbt.dsi.config->cabc_supported) |
| panel->vbt.dsi.cabc_ports = BIT(port); |
| |
| return; |
| } |
| |
| switch (panel->vbt.dsi.config->dl_dcs_backlight_ports) { |
| case DL_DCS_PORT_A: |
| panel->vbt.dsi.bl_ports = BIT(PORT_A); |
| break; |
| case DL_DCS_PORT_C: |
| panel->vbt.dsi.bl_ports = BIT(port_bc); |
| break; |
| default: |
| case DL_DCS_PORT_A_AND_C: |
| panel->vbt.dsi.bl_ports = BIT(PORT_A) | BIT(port_bc); |
| break; |
| } |
| |
| if (!panel->vbt.dsi.config->cabc_supported) |
| return; |
| |
| switch (panel->vbt.dsi.config->dl_dcs_cabc_ports) { |
| case DL_DCS_PORT_A: |
| panel->vbt.dsi.cabc_ports = BIT(PORT_A); |
| break; |
| case DL_DCS_PORT_C: |
| panel->vbt.dsi.cabc_ports = BIT(port_bc); |
| break; |
| default: |
| case DL_DCS_PORT_A_AND_C: |
| panel->vbt.dsi.cabc_ports = |
| BIT(PORT_A) | BIT(port_bc); |
| break; |
| } |
| } |
| |
| static void |
| parse_mipi_config(struct intel_display *display, |
| struct intel_panel *panel) |
| { |
| const struct bdb_mipi_config *start; |
| const struct mipi_config *config; |
| const struct mipi_pps_data *pps; |
| int panel_type = panel->vbt.panel_type; |
| enum port port; |
| |
| /* parse MIPI blocks only if LFP type is MIPI */ |
| if (!intel_bios_is_dsi_present(display, &port)) |
| return; |
| |
| /* Initialize this to undefined indicating no generic MIPI support */ |
| panel->vbt.dsi.panel_id = MIPI_DSI_UNDEFINED_PANEL_ID; |
| |
| start = bdb_find_section(display, BDB_MIPI_CONFIG); |
| if (!start) { |
| drm_dbg_kms(display->drm, "No MIPI config BDB found"); |
| return; |
| } |
| |
| drm_dbg(display->drm, "Found MIPI Config block, panel index = %d\n", |
| panel_type); |
| |
| /* |
| * get hold of the correct configuration block and pps data as per |
| * the panel_type as index |
| */ |
| config = &start->config[panel_type]; |
| pps = &start->pps[panel_type]; |
| |
| /* store as of now full data. Trim when we realise all is not needed */ |
| panel->vbt.dsi.config = kmemdup(config, sizeof(struct mipi_config), GFP_KERNEL); |
| if (!panel->vbt.dsi.config) |
| return; |
| |
| panel->vbt.dsi.pps = kmemdup(pps, sizeof(struct mipi_pps_data), GFP_KERNEL); |
| if (!panel->vbt.dsi.pps) { |
| kfree(panel->vbt.dsi.config); |
| return; |
| } |
| |
| parse_dsi_backlight_ports(display, panel, port); |
| |
| /* FIXME is the 90 vs. 270 correct? */ |
| switch (config->rotation) { |
| case ENABLE_ROTATION_0: |
| /* |
| * Most (all?) VBTs claim 0 degrees despite having |
| * an upside down panel, thus we do not trust this. |
| */ |
| panel->vbt.dsi.orientation = |
| DRM_MODE_PANEL_ORIENTATION_UNKNOWN; |
| break; |
| case ENABLE_ROTATION_90: |
| panel->vbt.dsi.orientation = |
| DRM_MODE_PANEL_ORIENTATION_RIGHT_UP; |
| break; |
| case ENABLE_ROTATION_180: |
| panel->vbt.dsi.orientation = |
| DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP; |
| break; |
| case ENABLE_ROTATION_270: |
| panel->vbt.dsi.orientation = |
| DRM_MODE_PANEL_ORIENTATION_LEFT_UP; |
| break; |
| } |
| |
| /* We have mandatory mipi config blocks. Initialize as generic panel */ |
| panel->vbt.dsi.panel_id = MIPI_DSI_GENERIC_PANEL_ID; |
| } |
| |
| /* Find the sequence block and size for the given panel. */ |
| static const u8 * |
| find_panel_sequence_block(struct intel_display *display, |
| const struct bdb_mipi_sequence *sequence, |
| u16 panel_id, u32 *seq_size) |
| { |
| u32 total = get_blocksize(sequence); |
| const u8 *data = &sequence->data[0]; |
| u8 current_id; |
| u32 current_size; |
| int header_size = sequence->version >= 3 ? 5 : 3; |
| int index = 0; |
| int i; |
| |
| /* skip new block size */ |
| if (sequence->version >= 3) |
| data += 4; |
| |
| for (i = 0; i < MAX_MIPI_CONFIGURATIONS && index < total; i++) { |
| if (index + header_size > total) { |
| drm_err(display->drm, |
| "Invalid sequence block (header)\n"); |
| return NULL; |
| } |
| |
| current_id = *(data + index); |
| if (sequence->version >= 3) |
| current_size = *((const u32 *)(data + index + 1)); |
| else |
| current_size = *((const u16 *)(data + index + 1)); |
| |
| index += header_size; |
| |
| if (index + current_size > total) { |
| drm_err(display->drm, "Invalid sequence block\n"); |
| return NULL; |
| } |
| |
| if (current_id == panel_id) { |
| *seq_size = current_size; |
| return data + index; |
| } |
| |
| index += current_size; |
| } |
| |
| drm_err(display->drm, |
| "Sequence block detected but no valid configuration\n"); |
| |
| return NULL; |
| } |
| |
| static int goto_next_sequence(struct intel_display *display, |
| const u8 *data, int index, int total) |
| { |
| u16 len; |
| |
| /* Skip Sequence Byte. */ |
| for (index = index + 1; index < total; index += len) { |
| u8 operation_byte = *(data + index); |
| index++; |
| |
| switch (operation_byte) { |
| case MIPI_SEQ_ELEM_END: |
| return index; |
| case MIPI_SEQ_ELEM_SEND_PKT: |
| if (index + 4 > total) |
| return 0; |
| |
| len = *((const u16 *)(data + index + 2)) + 4; |
| break; |
| case MIPI_SEQ_ELEM_DELAY: |
| len = 4; |
| break; |
| case MIPI_SEQ_ELEM_GPIO: |
| len = 2; |
| break; |
| case MIPI_SEQ_ELEM_I2C: |
| if (index + 7 > total) |
| return 0; |
| len = *(data + index + 6) + 7; |
| break; |
| default: |
| drm_err(display->drm, "Unknown operation byte\n"); |
| return 0; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int goto_next_sequence_v3(struct intel_display *display, |
| const u8 *data, int index, int total) |
| { |
| int seq_end; |
| u16 len; |
| u32 size_of_sequence; |
| |
| /* |
| * Could skip sequence based on Size of Sequence alone, but also do some |
| * checking on the structure. |
| */ |
| if (total < 5) { |
| drm_err(display->drm, "Too small sequence size\n"); |
| return 0; |
| } |
| |
| /* Skip Sequence Byte. */ |
| index++; |
| |
| /* |
| * Size of Sequence. Excludes the Sequence Byte and the size itself, |
| * includes MIPI_SEQ_ELEM_END byte, excludes the final MIPI_SEQ_END |
| * byte. |
| */ |
| size_of_sequence = *((const u32 *)(data + index)); |
| index += 4; |
| |
| seq_end = index + size_of_sequence; |
| if (seq_end > total) { |
| drm_err(display->drm, "Invalid sequence size\n"); |
| return 0; |
| } |
| |
| for (; index < total; index += len) { |
| u8 operation_byte = *(data + index); |
| index++; |
| |
| if (operation_byte == MIPI_SEQ_ELEM_END) { |
| if (index != seq_end) { |
| drm_err(display->drm, |
| "Invalid element structure\n"); |
| return 0; |
| } |
| return index; |
| } |
| |
| len = *(data + index); |
| index++; |
| |
| /* |
| * FIXME: Would be nice to check elements like for v1/v2 in |
| * goto_next_sequence() above. |
| */ |
| switch (operation_byte) { |
| case MIPI_SEQ_ELEM_SEND_PKT: |
| case MIPI_SEQ_ELEM_DELAY: |
| case MIPI_SEQ_ELEM_GPIO: |
| case MIPI_SEQ_ELEM_I2C: |
| case MIPI_SEQ_ELEM_SPI: |
| case MIPI_SEQ_ELEM_PMIC: |
| break; |
| default: |
| drm_err(display->drm, "Unknown operation byte %u\n", |
| operation_byte); |
| break; |
| } |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Get len of pre-fixed deassert fragment from a v1 init OTP sequence, |
| * skip all delay + gpio operands and stop at the first DSI packet op. |
| */ |
| static int get_init_otp_deassert_fragment_len(struct intel_display *display, |
| struct intel_panel *panel) |
| { |
| const u8 *data = panel->vbt.dsi.sequence[MIPI_SEQ_INIT_OTP]; |
| int index, len; |
| |
| if (drm_WARN_ON(display->drm, |
| !data || panel->vbt.dsi.seq_version != 1)) |
| return 0; |
| |
| /* index = 1 to skip sequence byte */ |
| for (index = 1; data[index] != MIPI_SEQ_ELEM_END; index += len) { |
| switch (data[index]) { |
| case MIPI_SEQ_ELEM_SEND_PKT: |
| return index == 1 ? 0 : index; |
| case MIPI_SEQ_ELEM_DELAY: |
| len = 5; /* 1 byte for operand + uint32 */ |
| break; |
| case MIPI_SEQ_ELEM_GPIO: |
| len = 3; /* 1 byte for op, 1 for gpio_nr, 1 for value */ |
| break; |
| default: |
| return 0; |
| } |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Some v1 VBT MIPI sequences do the deassert in the init OTP sequence. |
| * The deassert must be done before calling intel_dsi_device_ready, so for |
| * these devices we split the init OTP sequence into a deassert sequence and |
| * the actual init OTP part. |
| */ |
| static void vlv_fixup_mipi_sequences(struct intel_display *display, |
| struct intel_panel *panel) |
| { |
| u8 *init_otp; |
| int len; |
| |
| /* Limit this to v1 vid-mode sequences */ |
| if (panel->vbt.dsi.config->is_cmd_mode || |
| panel->vbt.dsi.seq_version != 1) |
| return; |
| |
| /* Only do this if there are otp and assert seqs and no deassert seq */ |
| if (!panel->vbt.dsi.sequence[MIPI_SEQ_INIT_OTP] || |
| !panel->vbt.dsi.sequence[MIPI_SEQ_ASSERT_RESET] || |
| panel->vbt.dsi.sequence[MIPI_SEQ_DEASSERT_RESET]) |
| return; |
| |
| /* The deassert-sequence ends at the first DSI packet */ |
| len = get_init_otp_deassert_fragment_len(display, panel); |
| if (!len) |
| return; |
| |
| drm_dbg_kms(display->drm, |
| "Using init OTP fragment to deassert reset\n"); |
| |
| /* Copy the fragment, update seq byte and terminate it */ |
| init_otp = (u8 *)panel->vbt.dsi.sequence[MIPI_SEQ_INIT_OTP]; |
| panel->vbt.dsi.deassert_seq = kmemdup(init_otp, len + 1, GFP_KERNEL); |
| if (!panel->vbt.dsi.deassert_seq) |
| return; |
| panel->vbt.dsi.deassert_seq[0] = MIPI_SEQ_DEASSERT_RESET; |
| panel->vbt.dsi.deassert_seq[len] = MIPI_SEQ_ELEM_END; |
| /* Use the copy for deassert */ |
| panel->vbt.dsi.sequence[MIPI_SEQ_DEASSERT_RESET] = |
| panel->vbt.dsi.deassert_seq; |
| /* Replace the last byte of the fragment with init OTP seq byte */ |
| init_otp[len - 1] = MIPI_SEQ_INIT_OTP; |
| /* And make MIPI_MIPI_SEQ_INIT_OTP point to it */ |
| panel->vbt.dsi.sequence[MIPI_SEQ_INIT_OTP] = init_otp + len - 1; |
| } |
| |
| /* |
| * Some machines (eg. Lenovo 82TQ) appear to have broken |
| * VBT sequences: |
| * - INIT_OTP is not present at all |
| * - what should be in INIT_OTP is in DISPLAY_ON |
| * - what should be in DISPLAY_ON is in BACKLIGHT_ON |
| * (along with the actual backlight stuff) |
| * |
| * To make those work we simply swap DISPLAY_ON and INIT_OTP. |
| * |
| * TODO: Do we need to limit this to specific machines, |
| * or examine the contents of the sequences to |
| * avoid false positives? |
| */ |
| static void icl_fixup_mipi_sequences(struct intel_display *display, |
| struct intel_panel *panel) |
| { |
| if (!panel->vbt.dsi.sequence[MIPI_SEQ_INIT_OTP] && |
| panel->vbt.dsi.sequence[MIPI_SEQ_DISPLAY_ON]) { |
| drm_dbg_kms(display->drm, |
| "Broken VBT: Swapping INIT_OTP and DISPLAY_ON sequences\n"); |
| |
| swap(panel->vbt.dsi.sequence[MIPI_SEQ_INIT_OTP], |
| panel->vbt.dsi.sequence[MIPI_SEQ_DISPLAY_ON]); |
| } |
| } |
| |
| static void fixup_mipi_sequences(struct intel_display *display, |
| struct intel_panel *panel) |
| { |
| struct drm_i915_private *i915 = to_i915(display->drm); |
| |
| if (DISPLAY_VER(display) >= 11) |
| icl_fixup_mipi_sequences(display, panel); |
| else if (IS_VALLEYVIEW(i915)) |
| vlv_fixup_mipi_sequences(display, panel); |
| } |
| |
| static void |
| parse_mipi_sequence(struct intel_display *display, |
| struct intel_panel *panel) |
| { |
| int panel_type = panel->vbt.panel_type; |
| const struct bdb_mipi_sequence *sequence; |
| const u8 *seq_data; |
| u32 seq_size; |
| u8 *data; |
| int index = 0; |
| |
| /* Only our generic panel driver uses the sequence block. */ |
| if (panel->vbt.dsi.panel_id != MIPI_DSI_GENERIC_PANEL_ID) |
| return; |
| |
| sequence = bdb_find_section(display, BDB_MIPI_SEQUENCE); |
| if (!sequence) { |
| drm_dbg_kms(display->drm, |
| "No MIPI Sequence found, parsing complete\n"); |
| return; |
| } |
| |
| /* Fail gracefully for forward incompatible sequence block. */ |
| if (sequence->version >= 4) { |
| drm_err(display->drm, |
| "Unable to parse MIPI Sequence Block v%u\n", |
| sequence->version); |
| return; |
| } |
| |
| drm_dbg(display->drm, "Found MIPI sequence block v%u\n", |
| sequence->version); |
| |
| seq_data = find_panel_sequence_block(display, sequence, panel_type, &seq_size); |
| if (!seq_data) |
| return; |
| |
| data = kmemdup(seq_data, seq_size, GFP_KERNEL); |
| if (!data) |
| return; |
| |
| /* Parse the sequences, store pointers to each sequence. */ |
| for (;;) { |
| u8 seq_id = *(data + index); |
| if (seq_id == MIPI_SEQ_END) |
| break; |
| |
| if (seq_id >= MIPI_SEQ_MAX) { |
| drm_err(display->drm, "Unknown sequence %u\n", |
| seq_id); |
| goto err; |
| } |
| |
| /* Log about presence of sequences we won't run. */ |
| if (seq_id == MIPI_SEQ_TEAR_ON || seq_id == MIPI_SEQ_TEAR_OFF) |
| drm_dbg_kms(display->drm, |
| "Unsupported sequence %u\n", seq_id); |
| |
| panel->vbt.dsi.sequence[seq_id] = data + index; |
| |
| if (sequence->version >= 3) |
| index = goto_next_sequence_v3(display, data, index, seq_size); |
| else |
| index = goto_next_sequence(display, data, index, seq_size); |
| if (!index) { |
| drm_err(display->drm, "Invalid sequence %u\n", |
| seq_id); |
| goto err; |
| } |
| } |
| |
| panel->vbt.dsi.data = data; |
| panel->vbt.dsi.size = seq_size; |
| panel->vbt.dsi.seq_version = sequence->version; |
| |
| fixup_mipi_sequences(display, panel); |
| |
| drm_dbg(display->drm, "MIPI related VBT parsing complete\n"); |
| return; |
| |
| err: |
| kfree(data); |
| memset(panel->vbt.dsi.sequence, 0, sizeof(panel->vbt.dsi.sequence)); |
| } |
| |
| static void |
| parse_compression_parameters(struct intel_display *display) |
| { |
| const struct bdb_compression_parameters *params; |
| struct intel_bios_encoder_data *devdata; |
| u16 block_size; |
| int index; |
| |
| if (display->vbt.version < 198) |
| return; |
| |
| params = bdb_find_section(display, BDB_COMPRESSION_PARAMETERS); |
| if (params) { |
| /* Sanity checks */ |
| if (params->entry_size != sizeof(params->data[0])) { |
| drm_dbg_kms(display->drm, |
| "VBT: unsupported compression param entry size\n"); |
| return; |
| } |
| |
| block_size = get_blocksize(params); |
| if (block_size < sizeof(*params)) { |
| drm_dbg_kms(display->drm, |
| "VBT: expected 16 compression param entries\n"); |
| return; |
| } |
| } |
| |
| list_for_each_entry(devdata, &display->vbt.display_devices, node) { |
| const struct child_device_config *child = &devdata->child; |
| |
| if (!child->compression_enable) |
| continue; |
| |
| if (!params) { |
| drm_dbg_kms(display->drm, |
| "VBT: compression params not available\n"); |
| continue; |
| } |
| |
| if (child->compression_method_cps) { |
| drm_dbg_kms(display->drm, |
| "VBT: CPS compression not supported\n"); |
| continue; |
| } |
| |
| index = child->compression_structure_index; |
| |
| devdata->dsc = kmemdup(¶ms->data[index], |
| sizeof(*devdata->dsc), GFP_KERNEL); |
| } |
| } |
| |
| static u8 translate_iboost(struct intel_display *display, u8 val) |
| { |
| static const u8 mapping[] = { 1, 3, 7 }; /* See VBT spec */ |
| |
| if (val >= ARRAY_SIZE(mapping)) { |
| drm_dbg_kms(display->drm, |
| "Unsupported I_boost value found in VBT (%d), display may not work properly\n", val); |
| return 0; |
| } |
| return mapping[val]; |
| } |
| |
| static const u8 cnp_ddc_pin_map[] = { |
| [0] = 0, /* N/A */ |
| [GMBUS_PIN_1_BXT] = DDC_BUS_DDI_B, |
| [GMBUS_PIN_2_BXT] = DDC_BUS_DDI_C, |
| [GMBUS_PIN_4_CNP] = DDC_BUS_DDI_D, /* sic */ |
| [GMBUS_PIN_3_BXT] = DDC_BUS_DDI_F, /* sic */ |
| }; |
| |
| static const u8 icp_ddc_pin_map[] = { |
| [GMBUS_PIN_1_BXT] = ICL_DDC_BUS_DDI_A, |
| [GMBUS_PIN_2_BXT] = ICL_DDC_BUS_DDI_B, |
| [GMBUS_PIN_3_BXT] = TGL_DDC_BUS_DDI_C, |
| [GMBUS_PIN_9_TC1_ICP] = ICL_DDC_BUS_PORT_1, |
| [GMBUS_PIN_10_TC2_ICP] = ICL_DDC_BUS_PORT_2, |
| [GMBUS_PIN_11_TC3_ICP] = ICL_DDC_BUS_PORT_3, |
| [GMBUS_PIN_12_TC4_ICP] = ICL_DDC_BUS_PORT_4, |
| [GMBUS_PIN_13_TC5_TGP] = TGL_DDC_BUS_PORT_5, |
| [GMBUS_PIN_14_TC6_TGP] = TGL_DDC_BUS_PORT_6, |
| }; |
| |
| static const u8 rkl_pch_tgp_ddc_pin_map[] = { |
| [GMBUS_PIN_1_BXT] = ICL_DDC_BUS_DDI_A, |
| [GMBUS_PIN_2_BXT] = ICL_DDC_BUS_DDI_B, |
| [GMBUS_PIN_9_TC1_ICP] = RKL_DDC_BUS_DDI_D, |
| [GMBUS_PIN_10_TC2_ICP] = RKL_DDC_BUS_DDI_E, |
| }; |
| |
| static const u8 adls_ddc_pin_map[] = { |
| [GMBUS_PIN_1_BXT] = ICL_DDC_BUS_DDI_A, |
| [GMBUS_PIN_9_TC1_ICP] = ADLS_DDC_BUS_PORT_TC1, |
| [GMBUS_PIN_10_TC2_ICP] = ADLS_DDC_BUS_PORT_TC2, |
| [GMBUS_PIN_11_TC3_ICP] = ADLS_DDC_BUS_PORT_TC3, |
| [GMBUS_PIN_12_TC4_ICP] = ADLS_DDC_BUS_PORT_TC4, |
| }; |
| |
| static const u8 gen9bc_tgp_ddc_pin_map[] = { |
| [GMBUS_PIN_2_BXT] = DDC_BUS_DDI_B, |
| [GMBUS_PIN_9_TC1_ICP] = DDC_BUS_DDI_C, |
| [GMBUS_PIN_10_TC2_ICP] = DDC_BUS_DDI_D, |
| }; |
| |
| static const u8 adlp_ddc_pin_map[] = { |
| [GMBUS_PIN_1_BXT] = ICL_DDC_BUS_DDI_A, |
| [GMBUS_PIN_2_BXT] = ICL_DDC_BUS_DDI_B, |
| [GMBUS_PIN_9_TC1_ICP] = ADLP_DDC_BUS_PORT_TC1, |
| [GMBUS_PIN_10_TC2_ICP] = ADLP_DDC_BUS_PORT_TC2, |
| [GMBUS_PIN_11_TC3_ICP] = ADLP_DDC_BUS_PORT_TC3, |
| [GMBUS_PIN_12_TC4_ICP] = ADLP_DDC_BUS_PORT_TC4, |
| }; |
| |
| static u8 map_ddc_pin(struct intel_display *display, u8 vbt_pin) |
| { |
| struct drm_i915_private *i915 = to_i915(display->drm); |
| const u8 *ddc_pin_map; |
| int i, n_entries; |
| |
| if (INTEL_PCH_TYPE(i915) >= PCH_MTL || IS_ALDERLAKE_P(i915)) { |
| ddc_pin_map = adlp_ddc_pin_map; |
| n_entries = ARRAY_SIZE(adlp_ddc_pin_map); |
| } else if (IS_ALDERLAKE_S(i915)) { |
| ddc_pin_map = adls_ddc_pin_map; |
| n_entries = ARRAY_SIZE(adls_ddc_pin_map); |
| } else if (INTEL_PCH_TYPE(i915) >= PCH_DG1) { |
| return vbt_pin; |
| } else if (IS_ROCKETLAKE(i915) && INTEL_PCH_TYPE(i915) == PCH_TGP) { |
| ddc_pin_map = rkl_pch_tgp_ddc_pin_map; |
| n_entries = ARRAY_SIZE(rkl_pch_tgp_ddc_pin_map); |
| } else if (HAS_PCH_TGP(i915) && DISPLAY_VER(display) == 9) { |
| ddc_pin_map = gen9bc_tgp_ddc_pin_map; |
| n_entries = ARRAY_SIZE(gen9bc_tgp_ddc_pin_map); |
| } else if (INTEL_PCH_TYPE(i915) >= PCH_ICP) { |
| ddc_pin_map = icp_ddc_pin_map; |
| n_entries = ARRAY_SIZE(icp_ddc_pin_map); |
| } else if (HAS_PCH_CNP(i915)) { |
| ddc_pin_map = cnp_ddc_pin_map; |
| n_entries = ARRAY_SIZE(cnp_ddc_pin_map); |
| } else { |
| /* Assuming direct map */ |
| return vbt_pin; |
| } |
| |
| for (i = 0; i < n_entries; i++) { |
| if (ddc_pin_map[i] == vbt_pin) |
| return i; |
| } |
| |
| drm_dbg_kms(display->drm, |
| "Ignoring alternate pin: VBT claims DDC pin %d, which is not valid for this platform\n", |
| vbt_pin); |
| return 0; |
| } |
| |
| static u8 dvo_port_type(u8 dvo_port) |
| { |
| switch (dvo_port) { |
| case DVO_PORT_HDMIA: |
| case DVO_PORT_HDMIB: |
| case DVO_PORT_HDMIC: |
| case DVO_PORT_HDMID: |
| case DVO_PORT_HDMIE: |
| case DVO_PORT_HDMIF: |
| case DVO_PORT_HDMIG: |
| case DVO_PORT_HDMIH: |
| case DVO_PORT_HDMII: |
| return DVO_PORT_HDMIA; |
| case DVO_PORT_DPA: |
| case DVO_PORT_DPB: |
| case DVO_PORT_DPC: |
| case DVO_PORT_DPD: |
| case DVO_PORT_DPE: |
| case DVO_PORT_DPF: |
| case DVO_PORT_DPG: |
| case DVO_PORT_DPH: |
| case DVO_PORT_DPI: |
| return DVO_PORT_DPA; |
| case DVO_PORT_MIPIA: |
| case DVO_PORT_MIPIB: |
| case DVO_PORT_MIPIC: |
| case DVO_PORT_MIPID: |
| return DVO_PORT_MIPIA; |
| default: |
| return dvo_port; |
| } |
| } |
| |
| static enum port __dvo_port_to_port(int n_ports, int n_dvo, |
| const int port_mapping[][3], u8 dvo_port) |
| { |
| enum port port; |
| int i; |
| |
| for (port = PORT_A; port < n_ports; port++) { |
| for (i = 0; i < n_dvo; i++) { |
| if (port_mapping[port][i] == -1) |
| break; |
| |
| if (dvo_port == port_mapping[port][i]) |
| return port; |
| } |
| } |
| |
| return PORT_NONE; |
| } |
| |
| static enum port dvo_port_to_port(struct intel_display *display, |
| u8 dvo_port) |
| { |
| struct drm_i915_private *i915 = to_i915(display->drm); |
| /* |
| * Each DDI port can have more than one value on the "DVO Port" field, |
| * so look for all the possible values for each port. |
| */ |
| static const int port_mapping[][3] = { |
| [PORT_A] = { DVO_PORT_HDMIA, DVO_PORT_DPA, -1 }, |
| [PORT_B] = { DVO_PORT_HDMIB, DVO_PORT_DPB, -1 }, |
| [PORT_C] = { DVO_PORT_HDMIC, DVO_PORT_DPC, -1 }, |
| [PORT_D] = { DVO_PORT_HDMID, DVO_PORT_DPD, -1 }, |
| [PORT_E] = { DVO_PORT_HDMIE, DVO_PORT_DPE, DVO_PORT_CRT }, |
| [PORT_F] = { DVO_PORT_HDMIF, DVO_PORT_DPF, -1 }, |
| [PORT_G] = { DVO_PORT_HDMIG, DVO_PORT_DPG, -1 }, |
| [PORT_H] = { DVO_PORT_HDMIH, DVO_PORT_DPH, -1 }, |
| [PORT_I] = { DVO_PORT_HDMII, DVO_PORT_DPI, -1 }, |
| }; |
| /* |
| * RKL VBT uses PHY based mapping. Combo PHYs A,B,C,D |
| * map to DDI A,B,TC1,TC2 respectively. |
| */ |
| static const int rkl_port_mapping[][3] = { |
| [PORT_A] = { DVO_PORT_HDMIA, DVO_PORT_DPA, -1 }, |
| [PORT_B] = { DVO_PORT_HDMIB, DVO_PORT_DPB, -1 }, |
| [PORT_C] = { -1 }, |
| [PORT_TC1] = { DVO_PORT_HDMIC, DVO_PORT_DPC, -1 }, |
| [PORT_TC2] = { DVO_PORT_HDMID, DVO_PORT_DPD, -1 }, |
| }; |
| /* |
| * Alderlake S ports used in the driver are PORT_A, PORT_D, PORT_E, |
| * PORT_F and PORT_G, we need to map that to correct VBT sections. |
| */ |
| static const int adls_port_mapping[][3] = { |
| [PORT_A] = { DVO_PORT_HDMIA, DVO_PORT_DPA, -1 }, |
| [PORT_B] = { -1 }, |
| [PORT_C] = { -1 }, |
| [PORT_TC1] = { DVO_PORT_HDMIB, DVO_PORT_DPB, -1 }, |
| [PORT_TC2] = { DVO_PORT_HDMIC, DVO_PORT_DPC, -1 }, |
| [PORT_TC3] = { DVO_PORT_HDMID, DVO_PORT_DPD, -1 }, |
| [PORT_TC4] = { DVO_PORT_HDMIE, DVO_PORT_DPE, -1 }, |
| }; |
| static const int xelpd_port_mapping[][3] = { |
| [PORT_A] = { DVO_PORT_HDMIA, DVO_PORT_DPA, -1 }, |
| [PORT_B] = { DVO_PORT_HDMIB, DVO_PORT_DPB, -1 }, |
| [PORT_C] = { DVO_PORT_HDMIC, DVO_PORT_DPC, -1 }, |
| [PORT_D_XELPD] = { DVO_PORT_HDMID, DVO_PORT_DPD, -1 }, |
| [PORT_E_XELPD] = { DVO_PORT_HDMIE, DVO_PORT_DPE, -1 }, |
| [PORT_TC1] = { DVO_PORT_HDMIF, DVO_PORT_DPF, -1 }, |
| [PORT_TC2] = { DVO_PORT_HDMIG, DVO_PORT_DPG, -1 }, |
| [PORT_TC3] = { DVO_PORT_HDMIH, DVO_PORT_DPH, -1 }, |
| [PORT_TC4] = { DVO_PORT_HDMII, DVO_PORT_DPI, -1 }, |
| }; |
| |
| if (DISPLAY_VER(display) >= 13) |
| return __dvo_port_to_port(ARRAY_SIZE(xelpd_port_mapping), |
| ARRAY_SIZE(xelpd_port_mapping[0]), |
| xelpd_port_mapping, |
| dvo_port); |
| else if (IS_ALDERLAKE_S(i915)) |
| return __dvo_port_to_port(ARRAY_SIZE(adls_port_mapping), |
| ARRAY_SIZE(adls_port_mapping[0]), |
| adls_port_mapping, |
| dvo_port); |
| else if (IS_DG1(i915) || IS_ROCKETLAKE(i915)) |
| return __dvo_port_to_port(ARRAY_SIZE(rkl_port_mapping), |
| ARRAY_SIZE(rkl_port_mapping[0]), |
| rkl_port_mapping, |
| dvo_port); |
| else |
| return __dvo_port_to_port(ARRAY_SIZE(port_mapping), |
| ARRAY_SIZE(port_mapping[0]), |
| port_mapping, |
| dvo_port); |
| } |
| |
| static enum port |
| dsi_dvo_port_to_port(struct intel_display *display, u8 dvo_port) |
| { |
| switch (dvo_port) { |
| case DVO_PORT_MIPIA: |
| return PORT_A; |
| case DVO_PORT_MIPIC: |
| if (DISPLAY_VER(display) >= 11) |
| return PORT_B; |
| else |
| return PORT_C; |
| default: |
| return PORT_NONE; |
| } |
| } |
| |
| enum port intel_bios_encoder_port(const struct intel_bios_encoder_data *devdata) |
| { |
| struct intel_display *display = devdata->display; |
| const struct child_device_config *child = &devdata->child; |
| enum port port; |
| |
| port = dvo_port_to_port(display, child->dvo_port); |
| if (port == PORT_NONE && DISPLAY_VER(display) >= 11) |
| port = dsi_dvo_port_to_port(display, child->dvo_port); |
| |
| return port; |
| } |
| |
| static int parse_bdb_230_dp_max_link_rate(const int vbt_max_link_rate) |
| { |
| switch (vbt_max_link_rate) { |
| default: |
| case BDB_230_VBT_DP_MAX_LINK_RATE_DEF: |
| return 0; |
| case BDB_230_VBT_DP_MAX_LINK_RATE_UHBR20: |
| return 2000000; |
| case BDB_230_VBT_DP_MAX_LINK_RATE_UHBR13P5: |
| return 1350000; |
| case BDB_230_VBT_DP_MAX_LINK_RATE_UHBR10: |
| return 1000000; |
| case BDB_230_VBT_DP_MAX_LINK_RATE_HBR3: |
| return 810000; |
| case BDB_230_VBT_DP_MAX_LINK_RATE_HBR2: |
| return 540000; |
| case BDB_230_VBT_DP_MAX_LINK_RATE_HBR: |
| return 270000; |
| case BDB_230_VBT_DP_MAX_LINK_RATE_LBR: |
| return 162000; |
| } |
| } |
| |
| static int parse_bdb_216_dp_max_link_rate(const int vbt_max_link_rate) |
| { |
| switch (vbt_max_link_rate) { |
| default: |
| case BDB_216_VBT_DP_MAX_LINK_RATE_HBR3: |
| return 810000; |
| case BDB_216_VBT_DP_MAX_LINK_RATE_HBR2: |
| return 540000; |
| case BDB_216_VBT_DP_MAX_LINK_RATE_HBR: |
| return 270000; |
| case BDB_216_VBT_DP_MAX_LINK_RATE_LBR: |
| return 162000; |
| } |
| } |
| |
| int intel_bios_dp_max_link_rate(const struct intel_bios_encoder_data *devdata) |
| { |
| if (!devdata || devdata->display->vbt.version < 216) |
| return 0; |
| |
| if (devdata->display->vbt.version >= 230) |
| return parse_bdb_230_dp_max_link_rate(devdata->child.dp_max_link_rate); |
| else |
| return parse_bdb_216_dp_max_link_rate(devdata->child.dp_max_link_rate); |
| } |
| |
| int intel_bios_dp_max_lane_count(const struct intel_bios_encoder_data *devdata) |
| { |
| if (!devdata || devdata->display->vbt.version < 244) |
| return 0; |
| |
| return devdata->child.dp_max_lane_count + 1; |
| } |
| |
| static void sanitize_device_type(struct intel_bios_encoder_data *devdata, |
| enum port port) |
| { |
| struct intel_display *display = devdata->display; |
| bool is_hdmi; |
| |
| if (port != PORT_A || DISPLAY_VER(display) >= 12) |
| return; |
| |
| if (!intel_bios_encoder_supports_dvi(devdata)) |
| return; |
| |
| is_hdmi = intel_bios_encoder_supports_hdmi(devdata); |
| |
| drm_dbg_kms(display->drm, "VBT claims port A supports DVI%s, ignoring\n", |
| is_hdmi ? "/HDMI" : ""); |
| |
| devdata->child.device_type &= ~DEVICE_TYPE_TMDS_DVI_SIGNALING; |
| devdata->child.device_type |= DEVICE_TYPE_NOT_HDMI_OUTPUT; |
| } |
| |
| static void sanitize_hdmi_level_shift(struct intel_bios_encoder_data *devdata, |
| enum port port) |
| { |
| struct intel_display *display = devdata->display; |
| struct drm_i915_private *i915 = to_i915(display->drm); |
| |
| if (!intel_bios_encoder_supports_dvi(devdata)) |
| return; |
| |
| /* |
| * Some BDW machines (eg. HP Pavilion 15-ab) shipped |
| * with a HSW VBT where the level shifter value goes |
| * up to 11, whereas the BDW max is 9. |
| */ |
| if (IS_BROADWELL(i915) && devdata->child.hdmi_level_shifter_value > 9) { |
| drm_dbg_kms(display->drm, |
| "Bogus port %c VBT HDMI level shift %d, adjusting to %d\n", |
| port_name(port), devdata->child.hdmi_level_shifter_value, 9); |
| |
| devdata->child.hdmi_level_shifter_value = 9; |
| } |
| } |
| |
| static bool |
| intel_bios_encoder_supports_crt(const struct intel_bios_encoder_data *devdata) |
| { |
| return devdata->child.device_type & DEVICE_TYPE_ANALOG_OUTPUT; |
| } |
| |
| bool |
| intel_bios_encoder_supports_dvi(const struct intel_bios_encoder_data *devdata) |
| { |
| return devdata->child.device_type & DEVICE_TYPE_TMDS_DVI_SIGNALING; |
| } |
| |
| bool |
| intel_bios_encoder_supports_hdmi(const struct intel_bios_encoder_data *devdata) |
| { |
| return intel_bios_encoder_supports_dvi(devdata) && |
| (devdata->child.device_type & DEVICE_TYPE_NOT_HDMI_OUTPUT) == 0; |
| } |
| |
| bool |
| intel_bios_encoder_supports_dp(const struct intel_bios_encoder_data *devdata) |
| { |
| return devdata->child.device_type & DEVICE_TYPE_DISPLAYPORT_OUTPUT; |
| } |
| |
| bool |
| intel_bios_encoder_supports_edp(const struct intel_bios_encoder_data *devdata) |
| { |
| return intel_bios_encoder_supports_dp(devdata) && |
| devdata->child.device_type & DEVICE_TYPE_INTERNAL_CONNECTOR; |
| } |
| |
| bool |
| intel_bios_encoder_supports_dsi(const struct intel_bios_encoder_data *devdata) |
| { |
| return devdata->child.device_type & DEVICE_TYPE_MIPI_OUTPUT; |
| } |
| |
| bool |
| intel_bios_encoder_is_lspcon(const struct intel_bios_encoder_data *devdata) |
| { |
| return devdata && HAS_LSPCON(devdata->display) && devdata->child.lspcon; |
| } |
| |
| /* This is an index in the HDMI/DVI DDI buffer translation table, or -1 */ |
| int intel_bios_hdmi_level_shift(const struct intel_bios_encoder_data *devdata) |
| { |
| if (!devdata || devdata->display->vbt.version < 158 || |
| DISPLAY_VER(devdata->display) >= 14) |
| return -1; |
| |
| return devdata->child.hdmi_level_shifter_value; |
| } |
| |
| int intel_bios_hdmi_max_tmds_clock(const struct intel_bios_encoder_data *devdata) |
| { |
| if (!devdata || devdata->display->vbt.version < 204) |
| return 0; |
| |
| switch (devdata->child.hdmi_max_data_rate) { |
| default: |
| MISSING_CASE(devdata->child.hdmi_max_data_rate); |
| fallthrough; |
| case HDMI_MAX_DATA_RATE_PLATFORM: |
| return 0; |
| case HDMI_MAX_DATA_RATE_594: |
| return 594000; |
| case HDMI_MAX_DATA_RATE_340: |
| return 340000; |
| case HDMI_MAX_DATA_RATE_300: |
| return 300000; |
| case HDMI_MAX_DATA_RATE_297: |
| return 297000; |
| case HDMI_MAX_DATA_RATE_165: |
| return 165000; |
| } |
| } |
| |
| static bool is_port_valid(struct intel_display *display, enum port port) |
| { |
| struct drm_i915_private *i915 = to_i915(display->drm); |
| /* |
| * On some ICL SKUs port F is not present, but broken VBTs mark |
| * the port as present. Only try to initialize port F for the |
| * SKUs that may actually have it. |
| */ |
| if (port == PORT_F && IS_ICELAKE(i915)) |
| return IS_ICL_WITH_PORT_F(i915); |
| |
| return true; |
| } |
| |
| static void print_ddi_port(const struct intel_bios_encoder_data *devdata) |
| { |
| struct intel_display *display = devdata->display; |
| const struct child_device_config *child = &devdata->child; |
| bool is_dvi, is_hdmi, is_dp, is_edp, is_dsi, is_crt, supports_typec_usb, supports_tbt; |
| int dp_boost_level, dp_max_link_rate, hdmi_boost_level, hdmi_level_shift, max_tmds_clock; |
| enum port port; |
| |
| port = intel_bios_encoder_port(devdata); |
| if (port == PORT_NONE) |
| return; |
| |
| is_dvi = intel_bios_encoder_supports_dvi(devdata); |
| is_dp = intel_bios_encoder_supports_dp(devdata); |
| is_crt = intel_bios_encoder_supports_crt(devdata); |
| is_hdmi = intel_bios_encoder_supports_hdmi(devdata); |
| is_edp = intel_bios_encoder_supports_edp(devdata); |
| is_dsi = intel_bios_encoder_supports_dsi(devdata); |
| |
| supports_typec_usb = intel_bios_encoder_supports_typec_usb(devdata); |
| supports_tbt = intel_bios_encoder_supports_tbt(devdata); |
| |
| drm_dbg_kms(display->drm, |
| "Port %c VBT info: CRT:%d DVI:%d HDMI:%d DP:%d eDP:%d DSI:%d DP++:%d LSPCON:%d USB-Type-C:%d TBT:%d DSC:%d\n", |
| port_name(port), is_crt, is_dvi, is_hdmi, is_dp, is_edp, is_dsi, |
| intel_bios_encoder_supports_dp_dual_mode(devdata), |
| intel_bios_encoder_is_lspcon(devdata), |
| supports_typec_usb, supports_tbt, |
| devdata->dsc != NULL); |
| |
| hdmi_level_shift = intel_bios_hdmi_level_shift(devdata); |
| if (hdmi_level_shift >= 0) { |
| drm_dbg_kms(display->drm, |
| "Port %c VBT HDMI level shift: %d\n", |
| port_name(port), hdmi_level_shift); |
| } |
| |
| max_tmds_clock = intel_bios_hdmi_max_tmds_clock(devdata); |
| if (max_tmds_clock) |
| drm_dbg_kms(display->drm, |
| "Port %c VBT HDMI max TMDS clock: %d kHz\n", |
| port_name(port), max_tmds_clock); |
| |
| /* I_boost config for SKL and above */ |
| dp_boost_level = intel_bios_dp_boost_level(devdata); |
| if (dp_boost_level) |
| drm_dbg_kms(display->drm, |
| "Port %c VBT (e)DP boost level: %d\n", |
| port_name(port), dp_boost_level); |
| |
| hdmi_boost_level = intel_bios_hdmi_boost_level(devdata); |
| if (hdmi_boost_level) |
| drm_dbg_kms(display->drm, |
| "Port %c VBT HDMI boost level: %d\n", |
| port_name(port), hdmi_boost_level); |
| |
| dp_max_link_rate = intel_bios_dp_max_link_rate(devdata); |
| if (dp_max_link_rate) |
| drm_dbg_kms(display->drm, |
| "Port %c VBT DP max link rate: %d\n", |
| port_name(port), dp_max_link_rate); |
| |
| /* |
| * FIXME need to implement support for VBT |
| * vswing/preemph tables should this ever trigger. |
| */ |
| drm_WARN(display->drm, child->use_vbt_vswing, |
| "Port %c asks to use VBT vswing/preemph tables\n", |
| port_name(port)); |
| } |
| |
| static void parse_ddi_port(struct intel_bios_encoder_data *devdata) |
| { |
| struct intel_display *display = devdata->display; |
| enum port port; |
| |
| port = intel_bios_encoder_port(devdata); |
| if (port == PORT_NONE) |
| return; |
| |
| if (!is_port_valid(display, port)) { |
| drm_dbg_kms(display->drm, |
| "VBT reports port %c as supported, but that can't be true: skipping\n", |
| port_name(port)); |
| return; |
| } |
| |
| sanitize_device_type(devdata, port); |
| sanitize_hdmi_level_shift(devdata, port); |
| } |
| |
| static bool has_ddi_port_info(struct intel_display *display) |
| { |
| struct drm_i915_private *i915 = to_i915(display->drm); |
| |
| return DISPLAY_VER(display) >= 5 || IS_G4X(i915); |
| } |
| |
| static void parse_ddi_ports(struct intel_display *display) |
| { |
| struct intel_bios_encoder_data *devdata; |
| |
| if (!has_ddi_port_info(display)) |
| return; |
| |
| list_for_each_entry(devdata, &display->vbt.display_devices, node) |
| parse_ddi_port(devdata); |
| |
| list_for_each_entry(devdata, &display->vbt.display_devices, node) |
| print_ddi_port(devdata); |
| } |
| |
| static int child_device_expected_size(u16 version) |
| { |
| BUILD_BUG_ON(sizeof(struct child_device_config) < 40); |
| |
| if (version > 256) |
| return -ENOENT; |
| else if (version >= 256) |
| return 40; |
| else if (version >= 216) |
| return 39; |
| else if (version >= 196) |
| return 38; |
| else if (version >= 195) |
| return 37; |
| else if (version >= 111) |
| return LEGACY_CHILD_DEVICE_CONFIG_SIZE; |
| else if (version >= 106) |
| return 27; |
| else |
| return 22; |
| } |
| |
| static bool child_device_size_valid(struct intel_display *display, int size) |
| { |
| int expected_size; |
| |
| expected_size = child_device_expected_size(display->vbt.version); |
| if (expected_size < 0) { |
| expected_size = sizeof(struct child_device_config); |
| drm_dbg(display->drm, |
| "Expected child device config size for VBT version %u not known; assuming %d\n", |
| display->vbt.version, expected_size); |
| } |
| |
| /* Flag an error for unexpected size, but continue anyway. */ |
| if (size != expected_size) |
| drm_err(display->drm, |
| "Unexpected child device config size %d (expected %d for VBT version %u)\n", |
| size, expected_size, display->vbt.version); |
| |
| /* The legacy sized child device config is the minimum we need. */ |
| if (size < LEGACY_CHILD_DEVICE_CONFIG_SIZE) { |
| drm_dbg_kms(display->drm, |
| "Child device config size %d is too small.\n", |
| size); |
| return false; |
| } |
| |
| return true; |
| } |
| |
| static void |
| parse_general_definitions(struct intel_display *display) |
| { |
| struct drm_i915_private *i915 = to_i915(display->drm); |
| const struct bdb_general_definitions *defs; |
| struct intel_bios_encoder_data *devdata; |
| const struct child_device_config *child; |
| int i, child_device_num; |
| u16 block_size; |
| int bus_pin; |
| |
| defs = bdb_find_section(display, BDB_GENERAL_DEFINITIONS); |
| if (!defs) { |
| drm_dbg_kms(display->drm, |
| "No general definition block is found, no devices defined.\n"); |
| return; |
| } |
| |
| block_size = get_blocksize(defs); |
| if (block_size < sizeof(*defs)) { |
| drm_dbg_kms(display->drm, |
| "General definitions block too small (%u)\n", |
| block_size); |
| return; |
| } |
| |
| bus_pin = defs->crt_ddc_gmbus_pin; |
| drm_dbg_kms(display->drm, "crt_ddc_bus_pin: %d\n", bus_pin); |
| if (intel_gmbus_is_valid_pin(i915, bus_pin)) |
| display->vbt.crt_ddc_pin = bus_pin; |
| |
| if (!child_device_size_valid(display, defs->child_dev_size)) |
| return; |
| |
| /* get the number of child device */ |
| child_device_num = (block_size - sizeof(*defs)) / defs->child_dev_size; |
| |
| for (i = 0; i < child_device_num; i++) { |
| child = child_device_ptr(defs, i); |
| if (!child->device_type) |
| continue; |
| |
| drm_dbg_kms(display->drm, |
| "Found VBT child device with type 0x%x\n", |
| child->device_type); |
| |
| devdata = kzalloc(sizeof(*devdata), GFP_KERNEL); |
| if (!devdata) |
| break; |
| |
| devdata->display = display; |
| |
| /* |
| * Copy as much as we know (sizeof) and is available |
| * (child_dev_size) of the child device config. Accessing the |
| * data must depend on VBT version. |
| */ |
| memcpy(&devdata->child, child, |
| min_t(size_t, defs->child_dev_size, sizeof(*child))); |
| |
| list_add_tail(&devdata->node, &display->vbt.display_devices); |
| } |
| |
| if (list_empty(&display->vbt.display_devices)) |
| drm_dbg_kms(display->drm, |
| "no child dev is parsed from VBT\n"); |
| } |
| |
| /* Common defaults which may be overridden by VBT. */ |
| static void |
| init_vbt_defaults(struct intel_display *display) |
| { |
| struct drm_i915_private *i915 = to_i915(display->drm); |
| |
| display->vbt.crt_ddc_pin = GMBUS_PIN_VGADDC; |
| |
| /* general features */ |
| display->vbt.int_tv_support = 1; |
| display->vbt.int_crt_support = 1; |
| |
| /* driver features */ |
| display->vbt.int_lvds_support = 1; |
| |
| /* Default to using SSC */ |
| display->vbt.lvds_use_ssc = 1; |
| /* |
| * Core/SandyBridge/IvyBridge use alternative (120MHz) reference |
| * clock for LVDS. |
| */ |
| display->vbt.lvds_ssc_freq = intel_bios_ssc_frequency(display, |
| !HAS_PCH_SPLIT(i915)); |
| drm_dbg_kms(display->drm, "Set default to SSC at %d kHz\n", |
| display->vbt.lvds_ssc_freq); |
| } |
| |
| /* Common defaults which may be overridden by VBT. */ |
| static void |
| init_vbt_panel_defaults(struct intel_panel *panel) |
| { |
| /* Default to having backlight */ |
| panel->vbt.backlight.present = true; |
| |
| /* LFP panel data */ |
| panel->vbt.lvds_dither = true; |
| } |
| |
| /* Defaults to initialize only if there is no VBT. */ |
| static void |
| init_vbt_missing_defaults(struct intel_display *display) |
| { |
| struct drm_i915_private *i915 = to_i915(display->drm); |
| unsigned int ports = DISPLAY_RUNTIME_INFO(display)->port_mask; |
| enum port port; |
| |
| if (!HAS_DDI(display) && !IS_CHERRYVIEW(i915)) |
| return; |
| |
| for_each_port_masked(port, ports) { |
| struct intel_bios_encoder_data *devdata; |
| struct child_device_config *child; |
| enum phy phy = intel_port_to_phy(i915, port); |
| |
| /* |
| * VBT has the TypeC mode (native,TBT/USB) and we don't want |
| * to detect it. |
| */ |
| if (intel_phy_is_tc(i915, phy)) |
| continue; |
| |
| /* Create fake child device config */ |
| devdata = kzalloc(sizeof(*devdata), GFP_KERNEL); |
| if (!devdata) |
| break; |
| |
| devdata->display = display; |
| child = &devdata->child; |
| |
| if (port == PORT_F) |
| child->dvo_port = DVO_PORT_HDMIF; |
| else if (port == PORT_E) |
| child->dvo_port = DVO_PORT_HDMIE; |
| else |
| child->dvo_port = DVO_PORT_HDMIA + port; |
| |
| if (port != PORT_A && port != PORT_E) |
| child->device_type |= DEVICE_TYPE_TMDS_DVI_SIGNALING; |
| |
| if (port != PORT_E) |
| child->device_type |= DEVICE_TYPE_DISPLAYPORT_OUTPUT; |
| |
| if (port == PORT_A) |
| child->device_type |= DEVICE_TYPE_INTERNAL_CONNECTOR; |
| |
| list_add_tail(&devdata->node, &display->vbt.display_devices); |
| |
| drm_dbg_kms(display->drm, |
| "Generating default VBT child device with type 0x%04x on port %c\n", |
| child->device_type, port_name(port)); |
| } |
| |
| /* Bypass some minimum baseline VBT version checks */ |
| display->vbt.version = 155; |
| } |
| |
| static const struct bdb_header *get_bdb_header(const struct vbt_header *vbt) |
| { |
| const void *_vbt = vbt; |
| |
| return _vbt + vbt->bdb_offset; |
| } |
| |
| /** |
| * intel_bios_is_valid_vbt - does the given buffer contain a valid VBT |
| * @display: display device |
| * @buf: pointer to a buffer to validate |
| * @size: size of the buffer |
| * |
| * Returns true on valid VBT. |
| */ |
| bool intel_bios_is_valid_vbt(struct intel_display *display, |
| const void *buf, size_t size) |
| { |
| const struct vbt_header *vbt = buf; |
| const struct bdb_header *bdb; |
| |
| if (!vbt) |
| return false; |
| |
| if (sizeof(struct vbt_header) > size) { |
| drm_dbg_kms(display->drm, "VBT header incomplete\n"); |
| return false; |
| } |
| |
| if (memcmp(vbt->signature, "$VBT", 4)) { |
| drm_dbg_kms(display->drm, "VBT invalid signature\n"); |
| return false; |
| } |
| |
| if (vbt->vbt_size > size) { |
| drm_dbg_kms(display->drm, |
| "VBT incomplete (vbt_size overflows)\n"); |
| return false; |
| } |
| |
| size = vbt->vbt_size; |
| |
| if (range_overflows_t(size_t, |
| vbt->bdb_offset, |
| sizeof(struct bdb_header), |
| size)) { |
| drm_dbg_kms(display->drm, "BDB header incomplete\n"); |
| return false; |
| } |
| |
| bdb = get_bdb_header(vbt); |
| if (range_overflows_t(size_t, vbt->bdb_offset, bdb->bdb_size, size)) { |
| drm_dbg_kms(display->drm, "BDB incomplete\n"); |
| return false; |
| } |
| |
| return vbt; |
| } |
| |
| static struct vbt_header *firmware_get_vbt(struct intel_display *display, |
| size_t *size) |
| { |
| struct vbt_header *vbt = NULL; |
| const struct firmware *fw = NULL; |
| const char *name = display->params.vbt_firmware; |
| int ret; |
| |
| if (!name || !*name) |
| return NULL; |
| |
| ret = request_firmware(&fw, name, display->drm->dev); |
| if (ret) { |
| drm_err(display->drm, |
| "Requesting VBT firmware \"%s\" failed (%d)\n", |
| name, ret); |
| return NULL; |
| } |
| |
| if (intel_bios_is_valid_vbt(display, fw->data, fw->size)) { |
| vbt = kmemdup(fw->data, fw->size, GFP_KERNEL); |
| if (vbt) { |
| drm_dbg_kms(display->drm, |
| "Found valid VBT firmware \"%s\"\n", name); |
| if (size) |
| *size = fw->size; |
| } |
| } else { |
| drm_dbg_kms(display->drm, "Invalid VBT firmware \"%s\"\n", |
| name); |
| } |
| |
| release_firmware(fw); |
| |
| return vbt; |
| } |
| |
| static u32 intel_spi_read(struct intel_uncore *uncore, u32 offset) |
| { |
| intel_uncore_write(uncore, PRIMARY_SPI_ADDRESS, offset); |
| |
| return intel_uncore_read(uncore, PRIMARY_SPI_TRIGGER); |
| } |
| |
| static struct vbt_header *spi_oprom_get_vbt(struct intel_display *display, |
| size_t *size) |
| { |
| struct drm_i915_private *i915 = to_i915(display->drm); |
| u32 count, data, found, store = 0; |
| u32 static_region, oprom_offset; |
| u32 oprom_size = 0x200000; |
| u16 vbt_size; |
| u32 *vbt; |
| |
| static_region = intel_uncore_read(&i915->uncore, SPI_STATIC_REGIONS); |
| static_region &= OPTIONROM_SPI_REGIONID_MASK; |
| intel_uncore_write(&i915->uncore, PRIMARY_SPI_REGIONID, static_region); |
| |
| oprom_offset = intel_uncore_read(&i915->uncore, OROM_OFFSET); |
| oprom_offset &= OROM_OFFSET_MASK; |
| |
| for (count = 0; count < oprom_size; count += 4) { |
| data = intel_spi_read(&i915->uncore, oprom_offset + count); |
| if (data == *((const u32 *)"$VBT")) { |
| found = oprom_offset + count; |
| break; |
| } |
| } |
| |
| if (count >= oprom_size) |
| goto err_not_found; |
| |
| /* Get VBT size and allocate space for the VBT */ |
| vbt_size = intel_spi_read(&i915->uncore, |
| found + offsetof(struct vbt_header, vbt_size)); |
| vbt_size &= 0xffff; |
| |
| vbt = kzalloc(round_up(vbt_size, 4), GFP_KERNEL); |
| if (!vbt) |
| goto err_not_found; |
| |
| for (count = 0; count < vbt_size; count += 4) |
| *(vbt + store++) = intel_spi_read(&i915->uncore, found + count); |
| |
| if (!intel_bios_is_valid_vbt(display, vbt, vbt_size)) |
| goto err_free_vbt; |
| |
| drm_dbg_kms(display->drm, "Found valid VBT in SPI flash\n"); |
| |
| if (size) |
| *size = vbt_size; |
| |
| return (struct vbt_header *)vbt; |
| |
| err_free_vbt: |
| kfree(vbt); |
| err_not_found: |
| return NULL; |
| } |
| |
| static struct vbt_header *oprom_get_vbt(struct intel_display *display, |
| size_t *sizep) |
| { |
| struct pci_dev *pdev = to_pci_dev(display->drm->dev); |
| void __iomem *p = NULL, *oprom; |
| struct vbt_header *vbt; |
| u16 vbt_size; |
| size_t i, size; |
| |
| oprom = pci_map_rom(pdev, &size); |
| if (!oprom) |
| return NULL; |
| |
| /* Scour memory looking for the VBT signature. */ |
| for (i = 0; i + 4 < size; i += 4) { |
| if (ioread32(oprom + i) != *((const u32 *)"$VBT")) |
| continue; |
| |
| p = oprom + i; |
| size -= i; |
| break; |
| } |
| |
| if (!p) |
| goto err_unmap_oprom; |
| |
| if (sizeof(struct vbt_header) > size) { |
| drm_dbg(display->drm, "VBT header incomplete\n"); |
| goto err_unmap_oprom; |
| } |
| |
| vbt_size = ioread16(p + offsetof(struct vbt_header, vbt_size)); |
| if (vbt_size > size) { |
| drm_dbg(display->drm, |
| "VBT incomplete (vbt_size overflows)\n"); |
| goto err_unmap_oprom; |
| } |
| |
| /* The rest will be validated by intel_bios_is_valid_vbt() */ |
| vbt = kmalloc(vbt_size, GFP_KERNEL); |
| if (!vbt) |
| goto err_unmap_oprom; |
| |
| memcpy_fromio(vbt, p, vbt_size); |
| |
| if (!intel_bios_is_valid_vbt(display, vbt, vbt_size)) |
| goto err_free_vbt; |
| |
| pci_unmap_rom(pdev, oprom); |
| |
| if (sizep) |
| *sizep = vbt_size; |
| |
| drm_dbg_kms(display->drm, "Found valid VBT in PCI ROM\n"); |
| |
| return vbt; |
| |
| err_free_vbt: |
| kfree(vbt); |
| err_unmap_oprom: |
| pci_unmap_rom(pdev, oprom); |
| |
| return NULL; |
| } |
| |
| static const struct vbt_header *intel_bios_get_vbt(struct intel_display *display, |
| size_t *sizep) |
| { |
| struct drm_i915_private *i915 = to_i915(display->drm); |
| const struct vbt_header *vbt = NULL; |
| intel_wakeref_t wakeref; |
| |
| vbt = firmware_get_vbt(display, sizep); |
| |
| if (!vbt) |
| vbt = intel_opregion_get_vbt(display, sizep); |
| |
| /* |
| * If the OpRegion does not have VBT, look in SPI flash |
| * through MMIO or PCI mapping |
| */ |
| if (!vbt && IS_DGFX(i915)) |
| with_intel_runtime_pm(&i915->runtime_pm, wakeref) |
| vbt = spi_oprom_get_vbt(display, sizep); |
| |
| if (!vbt) |
| with_intel_runtime_pm(&i915->runtime_pm, wakeref) |
| vbt = oprom_get_vbt(display, sizep); |
| |
| return vbt; |
| } |
| |
| /** |
| * intel_bios_init - find VBT and initialize settings from the BIOS |
| * @display: display device instance |
| * |
| * Parse and initialize settings from the Video BIOS Tables (VBT). If the VBT |
| * was not found in ACPI OpRegion, try to find it in PCI ROM first. Also |
| * initialize some defaults if the VBT is not present at all. |
| */ |
| void intel_bios_init(struct intel_display *display) |
| { |
| const struct vbt_header *vbt; |
| const struct bdb_header *bdb; |
| |
| INIT_LIST_HEAD(&display->vbt.display_devices); |
| INIT_LIST_HEAD(&display->vbt.bdb_blocks); |
| |
| if (!HAS_DISPLAY(display)) { |
| drm_dbg_kms(display->drm, |
| "Skipping VBT init due to disabled display.\n"); |
| return; |
| } |
| |
| init_vbt_defaults(display); |
| |
| vbt = intel_bios_get_vbt(display, NULL); |
| |
| if (!vbt) |
| goto out; |
| |
| bdb = get_bdb_header(vbt); |
| display->vbt.version = bdb->version; |
| |
| drm_dbg_kms(display->drm, |
| "VBT signature \"%.*s\", BDB version %d\n", |
| (int)sizeof(vbt->signature), vbt->signature, |
| display->vbt.version); |
| |
| init_bdb_blocks(display, bdb); |
| |
| /* Grab useful general definitions */ |
| parse_general_features(display); |
| parse_general_definitions(display); |
| parse_driver_features(display); |
| |
| /* Depends on child device list */ |
| parse_compression_parameters(display); |
| |
| out: |
| if (!vbt) { |
| drm_info(display->drm, |
| "Failed to find VBIOS tables (VBT)\n"); |
| init_vbt_missing_defaults(display); |
| } |
| |
| /* Further processing on pre-parsed or generated child device data */ |
| parse_sdvo_device_mapping(display); |
| parse_ddi_ports(display); |
| |
| kfree(vbt); |
| } |
| |
| static void intel_bios_init_panel(struct intel_display *display, |
| struct intel_panel *panel, |
| const struct intel_bios_encoder_data *devdata, |
| const struct drm_edid *drm_edid, |
| bool use_fallback) |
| { |
| /* already have it? */ |
| if (panel->vbt.panel_type >= 0) { |
| drm_WARN_ON(display->drm, !use_fallback); |
| return; |
| } |
| |
| panel->vbt.panel_type = get_panel_type(display, devdata, |
| drm_edid, use_fallback); |
| if (panel->vbt.panel_type < 0) { |
| drm_WARN_ON(display->drm, use_fallback); |
| return; |
| } |
| |
| init_vbt_panel_defaults(panel); |
| |
| parse_panel_options(display, panel); |
| parse_generic_dtd(display, panel); |
| parse_lfp_data(display, panel); |
| parse_lfp_backlight(display, panel); |
| parse_sdvo_lvds_data(display, panel); |
| parse_panel_driver_features(display, panel); |
| parse_power_conservation_features(display, panel); |
| parse_edp(display, panel); |
| parse_psr(display, panel); |
| parse_mipi_config(display, panel); |
| parse_mipi_sequence(display, panel); |
| } |
| |
| void intel_bios_init_panel_early(struct intel_display *display, |
| struct intel_panel *panel, |
| const struct intel_bios_encoder_data *devdata) |
| { |
| intel_bios_init_panel(display, panel, devdata, NULL, false); |
| } |
| |
| void intel_bios_init_panel_late(struct intel_display *display, |
| struct intel_panel *panel, |
| const struct intel_bios_encoder_data *devdata, |
| const struct drm_edid *drm_edid) |
| { |
| intel_bios_init_panel(display, panel, devdata, drm_edid, true); |
| } |
| |
| /** |
| * intel_bios_driver_remove - Free any resources allocated by intel_bios_init() |
| * @display: display device instance |
| */ |
| void intel_bios_driver_remove(struct intel_display *display) |
| { |
| struct intel_bios_encoder_data *devdata, *nd; |
| struct bdb_block_entry *entry, *ne; |
| |
| list_for_each_entry_safe(devdata, nd, &display->vbt.display_devices, |
| node) { |
| list_del(&devdata->node); |
| kfree(devdata->dsc); |
| kfree(devdata); |
| } |
| |
| list_for_each_entry_safe(entry, ne, &display->vbt.bdb_blocks, node) { |
| list_del(&entry->node); |
| kfree(entry); |
| } |
| } |
| |
| void intel_bios_fini_panel(struct intel_panel *panel) |
| { |
| kfree(panel->vbt.sdvo_lvds_vbt_mode); |
| panel->vbt.sdvo_lvds_vbt_mode = NULL; |
| kfree(panel->vbt.lfp_vbt_mode); |
| panel->vbt.lfp_vbt_mode = NULL; |
| kfree(panel->vbt.dsi.data); |
| panel->vbt.dsi.data = NULL; |
| kfree(panel->vbt.dsi.pps); |
| panel->vbt.dsi.pps = NULL; |
| kfree(panel->vbt.dsi.config); |
| panel->vbt.dsi.config = NULL; |
| kfree(panel->vbt.dsi.deassert_seq); |
| panel->vbt.dsi.deassert_seq = NULL; |
| } |
| |
| /** |
| * intel_bios_is_tv_present - is integrated TV present in VBT |
| * @display: display device instance |
| * |
| * Return true if TV is present. If no child devices were parsed from VBT, |
| * assume TV is present. |
| */ |
| bool intel_bios_is_tv_present(struct intel_display *display) |
| { |
| const struct intel_bios_encoder_data *devdata; |
| |
| if (!display->vbt.int_tv_support) |
| return false; |
| |
| if (list_empty(&display->vbt.display_devices)) |
| return true; |
| |
| list_for_each_entry(devdata, &display->vbt.display_devices, node) { |
| const struct child_device_config *child = &devdata->child; |
| |
| /* |
| * If the device type is not TV, continue. |
| */ |
| switch (child->device_type) { |
| case DEVICE_TYPE_INT_TV: |
| case DEVICE_TYPE_TV: |
| case DEVICE_TYPE_TV_SVIDEO_COMPOSITE: |
| break; |
| default: |
| continue; |
| } |
| /* Only when the addin_offset is non-zero, it is regarded |
| * as present. |
| */ |
| if (child->addin_offset) |
| return true; |
| } |
| |
| return false; |
| } |
| |
| /** |
| * intel_bios_is_lvds_present - is LVDS present in VBT |
| * @display: display device instance |
| * @i2c_pin: i2c pin for LVDS if present |
| * |
| * Return true if LVDS is present. If no child devices were parsed from VBT, |
| * assume LVDS is present. |
| */ |
| bool intel_bios_is_lvds_present(struct intel_display *display, u8 *i2c_pin) |
| { |
| struct drm_i915_private *i915 = to_i915(display->drm); |
| const struct intel_bios_encoder_data *devdata; |
| |
| if (list_empty(&display->vbt.display_devices)) |
| return true; |
| |
| list_for_each_entry(devdata, &display->vbt.display_devices, node) { |
| const struct child_device_config *child = &devdata->child; |
| |
| /* If the device type is not LFP, continue. |
| * We have to check both the new identifiers as well as the |
| * old for compatibility with some BIOSes. |
| */ |
| if (child->device_type != DEVICE_TYPE_INT_LFP && |
| child->device_type != DEVICE_TYPE_LFP) |
| continue; |
| |
| if (intel_gmbus_is_valid_pin(i915, child->i2c_pin)) |
| *i2c_pin = child->i2c_pin; |
| |
| /* However, we cannot trust the BIOS writers to populate |
| * the VBT correctly. Since LVDS requires additional |
| * information from AIM blocks, a non-zero addin offset is |
| * a good indicator that the LVDS is actually present. |
| */ |
| if (child->addin_offset) |
| return true; |
| |
| /* But even then some BIOS writers perform some black magic |
| * and instantiate the device without reference to any |
| * additional data. Trust that if the VBT was written into |
| * the OpRegion then they have validated the LVDS's existence. |
| */ |
| return intel_opregion_vbt_present(display); |
| } |
| |
| return false; |
| } |
| |
| /** |
| * intel_bios_is_port_present - is the specified digital port present |
| * @display: display device instance |
| * @port: port to check |
| * |
| * Return true if the device in %port is present. |
| */ |
| bool intel_bios_is_port_present(struct intel_display *display, enum port port) |
| { |
| const struct intel_bios_encoder_data *devdata; |
| |
| if (WARN_ON(!has_ddi_port_info(display))) |
| return true; |
| |
| if (!is_port_valid(display, port)) |
| return false; |
| |
| list_for_each_entry(devdata, &display->vbt.display_devices, node) { |
| const struct child_device_config *child = &devdata->child; |
| |
| if (dvo_port_to_port(display, child->dvo_port) == port) |
| return true; |
| } |
| |
| return false; |
| } |
| |
| bool intel_bios_encoder_supports_dp_dual_mode(const struct intel_bios_encoder_data *devdata) |
| { |
| const struct child_device_config *child = &devdata->child; |
| |
| if (!devdata) |
| return false; |
| |
| if (!intel_bios_encoder_supports_dp(devdata) || |
| !intel_bios_encoder_supports_hdmi(devdata)) |
| return false; |
| |
| if (dvo_port_type(child->dvo_port) == DVO_PORT_DPA) |
| return true; |
| |
| /* Only accept a HDMI dvo_port as DP++ if it has an AUX channel */ |
| if (dvo_port_type(child->dvo_port) == DVO_PORT_HDMIA && |
| child->aux_channel != 0) |
| return true; |
| |
| return false; |
| } |
| |
| /** |
| * intel_bios_is_dsi_present - is DSI present in VBT |
| * @display: display device instance |
| * @port: port for DSI if present |
| * |
| * Return true if DSI is present, and return the port in %port. |
| */ |
| bool intel_bios_is_dsi_present(struct intel_display *display, |
| enum port *port) |
| { |
| const struct intel_bios_encoder_data *devdata; |
| |
| list_for_each_entry(devdata, &display->vbt.display_devices, node) { |
| const struct child_device_config *child = &devdata->child; |
| u8 dvo_port = child->dvo_port; |
| |
| if (!(child->device_type & DEVICE_TYPE_MIPI_OUTPUT)) |
| continue; |
| |
| if (dsi_dvo_port_to_port(display, dvo_port) == PORT_NONE) { |
| drm_dbg_kms(display->drm, |
| "VBT has unsupported DSI port %c\n", |
| port_name(dvo_port - DVO_PORT_MIPIA)); |
| continue; |
| } |
| |
| if (port) |
| *port = dsi_dvo_port_to_port(display, dvo_port); |
| return true; |
| } |
| |
| return false; |
| } |
| |
| static void fill_dsc(struct intel_crtc_state *crtc_state, |
| struct dsc_compression_parameters_entry *dsc, |
| int dsc_max_bpc) |
| { |
| struct intel_display *display = to_intel_display(crtc_state); |
| struct drm_dsc_config *vdsc_cfg = &crtc_state->dsc.config; |
| int bpc = 8; |
| |
| vdsc_cfg->dsc_version_major = dsc->version_major; |
| vdsc_cfg->dsc_version_minor = dsc->version_minor; |
| |
| if (dsc->support_12bpc && dsc_max_bpc >= 12) |
| bpc = 12; |
| else if (dsc->support_10bpc && dsc_max_bpc >= 10) |
| bpc = 10; |
| else if (dsc->support_8bpc && dsc_max_bpc >= 8) |
| bpc = 8; |
| else |
| drm_dbg_kms(display->drm, "VBT: Unsupported BPC %d for DCS\n", |
| dsc_max_bpc); |
| |
| crtc_state->pipe_bpp = bpc * 3; |
| |
| crtc_state->dsc.compressed_bpp_x16 = fxp_q4_from_int(min(crtc_state->pipe_bpp, |
| VBT_DSC_MAX_BPP(dsc->max_bpp))); |
| |
| /* |
| * FIXME: This is ugly, and slice count should take DSC engine |
| * throughput etc. into account. |
| * |
| * Also, per spec DSI supports 1, 2, 3 or 4 horizontal slices. |
| */ |
| if (dsc->slices_per_line & BIT(2)) { |
| crtc_state->dsc.slice_count = 4; |
| } else if (dsc->slices_per_line & BIT(1)) { |
| crtc_state->dsc.slice_count = 2; |
| } else { |
| /* FIXME */ |
| if (!(dsc->slices_per_line & BIT(0))) |
| drm_dbg_kms(display->drm, |
| "VBT: Unsupported DSC slice count for DSI\n"); |
| |
| crtc_state->dsc.slice_count = 1; |
| } |
| |
| if (crtc_state->hw.adjusted_mode.crtc_hdisplay % |
| crtc_state->dsc.slice_count != 0) |
| drm_dbg_kms(display->drm, |
| "VBT: DSC hdisplay %d not divisible by slice count %d\n", |
| crtc_state->hw.adjusted_mode.crtc_hdisplay, |
| crtc_state->dsc.slice_count); |
| |
| /* |
| * The VBT rc_buffer_block_size and rc_buffer_size definitions |
| * correspond to DP 1.4 DPCD offsets 0x62 and 0x63. |
| */ |
| vdsc_cfg->rc_model_size = drm_dsc_dp_rc_buffer_size(dsc->rc_buffer_block_size, |
| dsc->rc_buffer_size); |
| |
| /* FIXME: DSI spec says bpc + 1 for this one */ |
| vdsc_cfg->line_buf_depth = VBT_DSC_LINE_BUFFER_DEPTH(dsc->line_buffer_depth); |
| |
| vdsc_cfg->block_pred_enable = dsc->block_prediction_enable; |
| |
| vdsc_cfg->slice_height = dsc->slice_height; |
| } |
| |
| /* FIXME: initially DSI specific */ |
| bool intel_bios_get_dsc_params(struct intel_encoder *encoder, |
| struct intel_crtc_state *crtc_state, |
| int dsc_max_bpc) |
| { |
| struct intel_display *display = to_intel_display(encoder); |
| const struct intel_bios_encoder_data *devdata; |
| |
| list_for_each_entry(devdata, &display->vbt.display_devices, node) { |
| const struct child_device_config *child = &devdata->child; |
| |
| if (!(child->device_type & DEVICE_TYPE_MIPI_OUTPUT)) |
| continue; |
| |
| if (dsi_dvo_port_to_port(display, child->dvo_port) == encoder->port) { |
| if (!devdata->dsc) |
| return false; |
| |
| fill_dsc(crtc_state, devdata->dsc, dsc_max_bpc); |
| |
| return true; |
| } |
| } |
| |
| return false; |
| } |
| |
| static const u8 adlp_aux_ch_map[] = { |
| [AUX_CH_A] = DP_AUX_A, |
| [AUX_CH_B] = DP_AUX_B, |
| [AUX_CH_C] = DP_AUX_C, |
| [AUX_CH_D_XELPD] = DP_AUX_D, |
| [AUX_CH_E_XELPD] = DP_AUX_E, |
| [AUX_CH_USBC1] = DP_AUX_F, |
| [AUX_CH_USBC2] = DP_AUX_G, |
| [AUX_CH_USBC3] = DP_AUX_H, |
| [AUX_CH_USBC4] = DP_AUX_I, |
| }; |
| |
| /* |
| * ADL-S VBT uses PHY based mapping. Combo PHYs A,B,C,D,E |
| * map to DDI A,TC1,TC2,TC3,TC4 respectively. |
| */ |
| static const u8 adls_aux_ch_map[] = { |
| [AUX_CH_A] = DP_AUX_A, |
| [AUX_CH_USBC1] = DP_AUX_B, |
| [AUX_CH_USBC2] = DP_AUX_C, |
| [AUX_CH_USBC3] = DP_AUX_D, |
| [AUX_CH_USBC4] = DP_AUX_E, |
| }; |
| |
| /* |
| * RKL/DG1 VBT uses PHY based mapping. Combo PHYs A,B,C,D |
| * map to DDI A,B,TC1,TC2 respectively. |
| */ |
| static const u8 rkl_aux_ch_map[] = { |
| [AUX_CH_A] = DP_AUX_A, |
| [AUX_CH_B] = DP_AUX_B, |
| [AUX_CH_USBC1] = DP_AUX_C, |
| [AUX_CH_USBC2] = DP_AUX_D, |
| }; |
| |
| static const u8 direct_aux_ch_map[] = { |
| [AUX_CH_A] = DP_AUX_A, |
| [AUX_CH_B] = DP_AUX_B, |
| [AUX_CH_C] = DP_AUX_C, |
| [AUX_CH_D] = DP_AUX_D, /* aka AUX_CH_USBC1 */ |
| [AUX_CH_E] = DP_AUX_E, /* aka AUX_CH_USBC2 */ |
| [AUX_CH_F] = DP_AUX_F, /* aka AUX_CH_USBC3 */ |
| [AUX_CH_G] = DP_AUX_G, /* aka AUX_CH_USBC4 */ |
| [AUX_CH_H] = DP_AUX_H, /* aka AUX_CH_USBC5 */ |
| [AUX_CH_I] = DP_AUX_I, /* aka AUX_CH_USBC6 */ |
| }; |
| |
| static enum aux_ch map_aux_ch(struct intel_display *display, u8 aux_channel) |
| { |
| struct drm_i915_private *i915 = to_i915(display->drm); |
| const u8 *aux_ch_map; |
| int i, n_entries; |
| |
| if (DISPLAY_VER(display) >= 13) { |
| aux_ch_map = adlp_aux_ch_map; |
| n_entries = ARRAY_SIZE(adlp_aux_ch_map); |
| } else if (IS_ALDERLAKE_S(i915)) { |
| aux_ch_map = adls_aux_ch_map; |
| n_entries = ARRAY_SIZE(adls_aux_ch_map); |
| } else if (IS_DG1(i915) || IS_ROCKETLAKE(i915)) { |
| aux_ch_map = rkl_aux_ch_map; |
| n_entries = ARRAY_SIZE(rkl_aux_ch_map); |
| } else { |
| aux_ch_map = direct_aux_ch_map; |
| n_entries = ARRAY_SIZE(direct_aux_ch_map); |
| } |
| |
| for (i = 0; i < n_entries; i++) { |
| if (aux_ch_map[i] == aux_channel) |
| return i; |
| } |
| |
| drm_dbg_kms(display->drm, |
| "Ignoring alternate AUX CH: VBT claims AUX 0x%x, which is not valid for this platform\n", |
| aux_channel); |
| |
| return AUX_CH_NONE; |
| } |
| |
| enum aux_ch intel_bios_dp_aux_ch(const struct intel_bios_encoder_data *devdata) |
| { |
| if (!devdata || !devdata->child.aux_channel) |
| return AUX_CH_NONE; |
| |
| return map_aux_ch(devdata->display, devdata->child.aux_channel); |
| } |
| |
| bool intel_bios_dp_has_shared_aux_ch(const struct intel_bios_encoder_data *devdata) |
| { |
| struct intel_display *display; |
| u8 aux_channel; |
| int count = 0; |
| |
| if (!devdata || !devdata->child.aux_channel) |
| return false; |
| |
| display = devdata->display; |
| aux_channel = devdata->child.aux_channel; |
| |
| list_for_each_entry(devdata, &display->vbt.display_devices, node) { |
| if (intel_bios_encoder_supports_dp(devdata) && |
| aux_channel == devdata->child.aux_channel) |
| count++; |
| } |
| |
| return count > 1; |
| } |
| |
| int intel_bios_dp_boost_level(const struct intel_bios_encoder_data *devdata) |
| { |
| if (!devdata || devdata->display->vbt.version < 196 || !devdata->child.iboost) |
| return 0; |
| |
| return translate_iboost(devdata->display, devdata->child.dp_iboost_level); |
| } |
| |
| int intel_bios_hdmi_boost_level(const struct intel_bios_encoder_data *devdata) |
| { |
| if (!devdata || devdata->display->vbt.version < 196 || !devdata->child.iboost) |
| return 0; |
| |
| return translate_iboost(devdata->display, devdata->child.hdmi_iboost_level); |
| } |
| |
| int intel_bios_hdmi_ddc_pin(const struct intel_bios_encoder_data *devdata) |
| { |
| if (!devdata || !devdata->child.ddc_pin) |
| return 0; |
| |
| return map_ddc_pin(devdata->display, devdata->child.ddc_pin); |
| } |
| |
| bool intel_bios_encoder_supports_typec_usb(const struct intel_bios_encoder_data *devdata) |
| { |
| return devdata->display->vbt.version >= 195 && devdata->child.dp_usb_type_c; |
| } |
| |
| bool intel_bios_encoder_supports_tbt(const struct intel_bios_encoder_data *devdata) |
| { |
| return devdata->display->vbt.version >= 209 && devdata->child.tbt; |
| } |
| |
| bool intel_bios_encoder_lane_reversal(const struct intel_bios_encoder_data *devdata) |
| { |
| return devdata && devdata->child.lane_reversal; |
| } |
| |
| bool intel_bios_encoder_hpd_invert(const struct intel_bios_encoder_data *devdata) |
| { |
| return devdata && devdata->child.hpd_invert; |
| } |
| |
| const struct intel_bios_encoder_data * |
| intel_bios_encoder_data_lookup(struct intel_display *display, enum port port) |
| { |
| struct intel_bios_encoder_data *devdata; |
| |
| list_for_each_entry(devdata, &display->vbt.display_devices, node) { |
| if (intel_bios_encoder_port(devdata) == port) |
| return devdata; |
| } |
| |
| return NULL; |
| } |
| |
| void intel_bios_for_each_encoder(struct intel_display *display, |
| void (*func)(struct intel_display *display, |
| const struct intel_bios_encoder_data *devdata)) |
| { |
| struct intel_bios_encoder_data *devdata; |
| |
| list_for_each_entry(devdata, &display->vbt.display_devices, node) |
| func(display, devdata); |
| } |
| |
| static int intel_bios_vbt_show(struct seq_file *m, void *unused) |
| { |
| struct intel_display *display = m->private; |
| const void *vbt; |
| size_t vbt_size; |
| |
| vbt = intel_bios_get_vbt(display, &vbt_size); |
| |
| if (vbt) { |
| seq_write(m, vbt, vbt_size); |
| kfree(vbt); |
| } |
| |
| return 0; |
| } |
| |
| DEFINE_SHOW_ATTRIBUTE(intel_bios_vbt); |
| |
| void intel_bios_debugfs_register(struct intel_display *display) |
| { |
| struct drm_minor *minor = display->drm->primary; |
| |
| debugfs_create_file("i915_vbt", 0444, minor->debugfs_root, |
| display, &intel_bios_vbt_fops); |
| } |