| /* SPDX-License-Identifier: MIT */ |
| /* |
| * Copyright © 2019 Intel Corporation |
| */ |
| |
| #include <linux/string_helpers.h> |
| |
| #include "i915_drv.h" |
| #include "i915_irq.h" |
| #include "i915_reg.h" |
| #include "intel_backlight_regs.h" |
| #include "intel_cdclk.h" |
| #include "intel_clock_gating.h" |
| #include "intel_combo_phy.h" |
| #include "intel_de.h" |
| #include "intel_display_power.h" |
| #include "intel_display_power_map.h" |
| #include "intel_display_power_well.h" |
| #include "intel_display_types.h" |
| #include "intel_dmc.h" |
| #include "intel_mchbar_regs.h" |
| #include "intel_pch_refclk.h" |
| #include "intel_pcode.h" |
| #include "intel_pmdemand.h" |
| #include "intel_pps_regs.h" |
| #include "intel_snps_phy.h" |
| #include "skl_watermark.h" |
| #include "skl_watermark_regs.h" |
| #include "vlv_sideband.h" |
| |
| #define for_each_power_domain_well(__dev_priv, __power_well, __domain) \ |
| for_each_power_well(__dev_priv, __power_well) \ |
| for_each_if(test_bit((__domain), (__power_well)->domains.bits)) |
| |
| #define for_each_power_domain_well_reverse(__dev_priv, __power_well, __domain) \ |
| for_each_power_well_reverse(__dev_priv, __power_well) \ |
| for_each_if(test_bit((__domain), (__power_well)->domains.bits)) |
| |
| static const char * |
| intel_display_power_domain_str(enum intel_display_power_domain domain) |
| { |
| switch (domain) { |
| case POWER_DOMAIN_DISPLAY_CORE: |
| return "DISPLAY_CORE"; |
| case POWER_DOMAIN_PIPE_A: |
| return "PIPE_A"; |
| case POWER_DOMAIN_PIPE_B: |
| return "PIPE_B"; |
| case POWER_DOMAIN_PIPE_C: |
| return "PIPE_C"; |
| case POWER_DOMAIN_PIPE_D: |
| return "PIPE_D"; |
| case POWER_DOMAIN_PIPE_PANEL_FITTER_A: |
| return "PIPE_PANEL_FITTER_A"; |
| case POWER_DOMAIN_PIPE_PANEL_FITTER_B: |
| return "PIPE_PANEL_FITTER_B"; |
| case POWER_DOMAIN_PIPE_PANEL_FITTER_C: |
| return "PIPE_PANEL_FITTER_C"; |
| case POWER_DOMAIN_PIPE_PANEL_FITTER_D: |
| return "PIPE_PANEL_FITTER_D"; |
| case POWER_DOMAIN_TRANSCODER_A: |
| return "TRANSCODER_A"; |
| case POWER_DOMAIN_TRANSCODER_B: |
| return "TRANSCODER_B"; |
| case POWER_DOMAIN_TRANSCODER_C: |
| return "TRANSCODER_C"; |
| case POWER_DOMAIN_TRANSCODER_D: |
| return "TRANSCODER_D"; |
| case POWER_DOMAIN_TRANSCODER_EDP: |
| return "TRANSCODER_EDP"; |
| case POWER_DOMAIN_TRANSCODER_DSI_A: |
| return "TRANSCODER_DSI_A"; |
| case POWER_DOMAIN_TRANSCODER_DSI_C: |
| return "TRANSCODER_DSI_C"; |
| case POWER_DOMAIN_TRANSCODER_VDSC_PW2: |
| return "TRANSCODER_VDSC_PW2"; |
| case POWER_DOMAIN_PORT_DDI_LANES_A: |
| return "PORT_DDI_LANES_A"; |
| case POWER_DOMAIN_PORT_DDI_LANES_B: |
| return "PORT_DDI_LANES_B"; |
| case POWER_DOMAIN_PORT_DDI_LANES_C: |
| return "PORT_DDI_LANES_C"; |
| case POWER_DOMAIN_PORT_DDI_LANES_D: |
| return "PORT_DDI_LANES_D"; |
| case POWER_DOMAIN_PORT_DDI_LANES_E: |
| return "PORT_DDI_LANES_E"; |
| case POWER_DOMAIN_PORT_DDI_LANES_F: |
| return "PORT_DDI_LANES_F"; |
| case POWER_DOMAIN_PORT_DDI_LANES_TC1: |
| return "PORT_DDI_LANES_TC1"; |
| case POWER_DOMAIN_PORT_DDI_LANES_TC2: |
| return "PORT_DDI_LANES_TC2"; |
| case POWER_DOMAIN_PORT_DDI_LANES_TC3: |
| return "PORT_DDI_LANES_TC3"; |
| case POWER_DOMAIN_PORT_DDI_LANES_TC4: |
| return "PORT_DDI_LANES_TC4"; |
| case POWER_DOMAIN_PORT_DDI_LANES_TC5: |
| return "PORT_DDI_LANES_TC5"; |
| case POWER_DOMAIN_PORT_DDI_LANES_TC6: |
| return "PORT_DDI_LANES_TC6"; |
| case POWER_DOMAIN_PORT_DDI_IO_A: |
| return "PORT_DDI_IO_A"; |
| case POWER_DOMAIN_PORT_DDI_IO_B: |
| return "PORT_DDI_IO_B"; |
| case POWER_DOMAIN_PORT_DDI_IO_C: |
| return "PORT_DDI_IO_C"; |
| case POWER_DOMAIN_PORT_DDI_IO_D: |
| return "PORT_DDI_IO_D"; |
| case POWER_DOMAIN_PORT_DDI_IO_E: |
| return "PORT_DDI_IO_E"; |
| case POWER_DOMAIN_PORT_DDI_IO_F: |
| return "PORT_DDI_IO_F"; |
| case POWER_DOMAIN_PORT_DDI_IO_TC1: |
| return "PORT_DDI_IO_TC1"; |
| case POWER_DOMAIN_PORT_DDI_IO_TC2: |
| return "PORT_DDI_IO_TC2"; |
| case POWER_DOMAIN_PORT_DDI_IO_TC3: |
| return "PORT_DDI_IO_TC3"; |
| case POWER_DOMAIN_PORT_DDI_IO_TC4: |
| return "PORT_DDI_IO_TC4"; |
| case POWER_DOMAIN_PORT_DDI_IO_TC5: |
| return "PORT_DDI_IO_TC5"; |
| case POWER_DOMAIN_PORT_DDI_IO_TC6: |
| return "PORT_DDI_IO_TC6"; |
| case POWER_DOMAIN_PORT_DSI: |
| return "PORT_DSI"; |
| case POWER_DOMAIN_PORT_CRT: |
| return "PORT_CRT"; |
| case POWER_DOMAIN_PORT_OTHER: |
| return "PORT_OTHER"; |
| case POWER_DOMAIN_VGA: |
| return "VGA"; |
| case POWER_DOMAIN_AUDIO_MMIO: |
| return "AUDIO_MMIO"; |
| case POWER_DOMAIN_AUDIO_PLAYBACK: |
| return "AUDIO_PLAYBACK"; |
| case POWER_DOMAIN_AUX_IO_A: |
| return "AUX_IO_A"; |
| case POWER_DOMAIN_AUX_IO_B: |
| return "AUX_IO_B"; |
| case POWER_DOMAIN_AUX_IO_C: |
| return "AUX_IO_C"; |
| case POWER_DOMAIN_AUX_IO_D: |
| return "AUX_IO_D"; |
| case POWER_DOMAIN_AUX_IO_E: |
| return "AUX_IO_E"; |
| case POWER_DOMAIN_AUX_IO_F: |
| return "AUX_IO_F"; |
| case POWER_DOMAIN_AUX_A: |
| return "AUX_A"; |
| case POWER_DOMAIN_AUX_B: |
| return "AUX_B"; |
| case POWER_DOMAIN_AUX_C: |
| return "AUX_C"; |
| case POWER_DOMAIN_AUX_D: |
| return "AUX_D"; |
| case POWER_DOMAIN_AUX_E: |
| return "AUX_E"; |
| case POWER_DOMAIN_AUX_F: |
| return "AUX_F"; |
| case POWER_DOMAIN_AUX_USBC1: |
| return "AUX_USBC1"; |
| case POWER_DOMAIN_AUX_USBC2: |
| return "AUX_USBC2"; |
| case POWER_DOMAIN_AUX_USBC3: |
| return "AUX_USBC3"; |
| case POWER_DOMAIN_AUX_USBC4: |
| return "AUX_USBC4"; |
| case POWER_DOMAIN_AUX_USBC5: |
| return "AUX_USBC5"; |
| case POWER_DOMAIN_AUX_USBC6: |
| return "AUX_USBC6"; |
| case POWER_DOMAIN_AUX_TBT1: |
| return "AUX_TBT1"; |
| case POWER_DOMAIN_AUX_TBT2: |
| return "AUX_TBT2"; |
| case POWER_DOMAIN_AUX_TBT3: |
| return "AUX_TBT3"; |
| case POWER_DOMAIN_AUX_TBT4: |
| return "AUX_TBT4"; |
| case POWER_DOMAIN_AUX_TBT5: |
| return "AUX_TBT5"; |
| case POWER_DOMAIN_AUX_TBT6: |
| return "AUX_TBT6"; |
| case POWER_DOMAIN_GMBUS: |
| return "GMBUS"; |
| case POWER_DOMAIN_INIT: |
| return "INIT"; |
| case POWER_DOMAIN_GT_IRQ: |
| return "GT_IRQ"; |
| case POWER_DOMAIN_DC_OFF: |
| return "DC_OFF"; |
| case POWER_DOMAIN_TC_COLD_OFF: |
| return "TC_COLD_OFF"; |
| default: |
| MISSING_CASE(domain); |
| return "?"; |
| } |
| } |
| |
| static bool __intel_display_power_is_enabled(struct drm_i915_private *dev_priv, |
| enum intel_display_power_domain domain) |
| { |
| struct i915_power_well *power_well; |
| bool is_enabled; |
| |
| if (pm_runtime_suspended(dev_priv->drm.dev)) |
| return false; |
| |
| is_enabled = true; |
| |
| for_each_power_domain_well_reverse(dev_priv, power_well, domain) { |
| if (intel_power_well_is_always_on(power_well)) |
| continue; |
| |
| if (!intel_power_well_is_enabled_cached(power_well)) { |
| is_enabled = false; |
| break; |
| } |
| } |
| |
| return is_enabled; |
| } |
| |
| /** |
| * intel_display_power_is_enabled - check for a power domain |
| * @dev_priv: i915 device instance |
| * @domain: power domain to check |
| * |
| * This function can be used to check the hw power domain state. It is mostly |
| * used in hardware state readout functions. Everywhere else code should rely |
| * upon explicit power domain reference counting to ensure that the hardware |
| * block is powered up before accessing it. |
| * |
| * Callers must hold the relevant modesetting locks to ensure that concurrent |
| * threads can't disable the power well while the caller tries to read a few |
| * registers. |
| * |
| * Returns: |
| * True when the power domain is enabled, false otherwise. |
| */ |
| bool intel_display_power_is_enabled(struct drm_i915_private *dev_priv, |
| enum intel_display_power_domain domain) |
| { |
| struct i915_power_domains *power_domains; |
| bool ret; |
| |
| power_domains = &dev_priv->display.power.domains; |
| |
| mutex_lock(&power_domains->lock); |
| ret = __intel_display_power_is_enabled(dev_priv, domain); |
| mutex_unlock(&power_domains->lock); |
| |
| return ret; |
| } |
| |
| static u32 |
| sanitize_target_dc_state(struct drm_i915_private *i915, |
| u32 target_dc_state) |
| { |
| struct i915_power_domains *power_domains = &i915->display.power.domains; |
| static const u32 states[] = { |
| DC_STATE_EN_UPTO_DC6, |
| DC_STATE_EN_UPTO_DC5, |
| DC_STATE_EN_DC3CO, |
| DC_STATE_DISABLE, |
| }; |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(states) - 1; i++) { |
| if (target_dc_state != states[i]) |
| continue; |
| |
| if (power_domains->allowed_dc_mask & target_dc_state) |
| break; |
| |
| target_dc_state = states[i + 1]; |
| } |
| |
| return target_dc_state; |
| } |
| |
| /** |
| * intel_display_power_set_target_dc_state - Set target dc state. |
| * @dev_priv: i915 device |
| * @state: state which needs to be set as target_dc_state. |
| * |
| * This function set the "DC off" power well target_dc_state, |
| * based upon this target_dc_stste, "DC off" power well will |
| * enable desired DC state. |
| */ |
| void intel_display_power_set_target_dc_state(struct drm_i915_private *dev_priv, |
| u32 state) |
| { |
| struct i915_power_well *power_well; |
| bool dc_off_enabled; |
| struct i915_power_domains *power_domains = &dev_priv->display.power.domains; |
| |
| mutex_lock(&power_domains->lock); |
| power_well = lookup_power_well(dev_priv, SKL_DISP_DC_OFF); |
| |
| if (drm_WARN_ON(&dev_priv->drm, !power_well)) |
| goto unlock; |
| |
| state = sanitize_target_dc_state(dev_priv, state); |
| |
| if (state == power_domains->target_dc_state) |
| goto unlock; |
| |
| dc_off_enabled = intel_power_well_is_enabled(dev_priv, power_well); |
| /* |
| * If DC off power well is disabled, need to enable and disable the |
| * DC off power well to effect target DC state. |
| */ |
| if (!dc_off_enabled) |
| intel_power_well_enable(dev_priv, power_well); |
| |
| power_domains->target_dc_state = state; |
| |
| if (!dc_off_enabled) |
| intel_power_well_disable(dev_priv, power_well); |
| |
| unlock: |
| mutex_unlock(&power_domains->lock); |
| } |
| |
| static void __async_put_domains_mask(struct i915_power_domains *power_domains, |
| struct intel_power_domain_mask *mask) |
| { |
| bitmap_or(mask->bits, |
| power_domains->async_put_domains[0].bits, |
| power_domains->async_put_domains[1].bits, |
| POWER_DOMAIN_NUM); |
| } |
| |
| #if IS_ENABLED(CONFIG_DRM_I915_DEBUG_RUNTIME_PM) |
| |
| static bool |
| assert_async_put_domain_masks_disjoint(struct i915_power_domains *power_domains) |
| { |
| struct drm_i915_private *i915 = container_of(power_domains, |
| struct drm_i915_private, |
| display.power.domains); |
| |
| return !drm_WARN_ON(&i915->drm, |
| bitmap_intersects(power_domains->async_put_domains[0].bits, |
| power_domains->async_put_domains[1].bits, |
| POWER_DOMAIN_NUM)); |
| } |
| |
| static bool |
| __async_put_domains_state_ok(struct i915_power_domains *power_domains) |
| { |
| struct drm_i915_private *i915 = container_of(power_domains, |
| struct drm_i915_private, |
| display.power.domains); |
| struct intel_power_domain_mask async_put_mask; |
| enum intel_display_power_domain domain; |
| bool err = false; |
| |
| err |= !assert_async_put_domain_masks_disjoint(power_domains); |
| __async_put_domains_mask(power_domains, &async_put_mask); |
| err |= drm_WARN_ON(&i915->drm, |
| !!power_domains->async_put_wakeref != |
| !bitmap_empty(async_put_mask.bits, POWER_DOMAIN_NUM)); |
| |
| for_each_power_domain(domain, &async_put_mask) |
| err |= drm_WARN_ON(&i915->drm, |
| power_domains->domain_use_count[domain] != 1); |
| |
| return !err; |
| } |
| |
| static void print_power_domains(struct i915_power_domains *power_domains, |
| const char *prefix, struct intel_power_domain_mask *mask) |
| { |
| struct drm_i915_private *i915 = container_of(power_domains, |
| struct drm_i915_private, |
| display.power.domains); |
| enum intel_display_power_domain domain; |
| |
| drm_dbg(&i915->drm, "%s (%d):\n", prefix, bitmap_weight(mask->bits, POWER_DOMAIN_NUM)); |
| for_each_power_domain(domain, mask) |
| drm_dbg(&i915->drm, "%s use_count %d\n", |
| intel_display_power_domain_str(domain), |
| power_domains->domain_use_count[domain]); |
| } |
| |
| static void |
| print_async_put_domains_state(struct i915_power_domains *power_domains) |
| { |
| struct drm_i915_private *i915 = container_of(power_domains, |
| struct drm_i915_private, |
| display.power.domains); |
| |
| drm_dbg(&i915->drm, "async_put_wakeref: %s\n", |
| str_yes_no(power_domains->async_put_wakeref)); |
| |
| print_power_domains(power_domains, "async_put_domains[0]", |
| &power_domains->async_put_domains[0]); |
| print_power_domains(power_domains, "async_put_domains[1]", |
| &power_domains->async_put_domains[1]); |
| } |
| |
| static void |
| verify_async_put_domains_state(struct i915_power_domains *power_domains) |
| { |
| if (!__async_put_domains_state_ok(power_domains)) |
| print_async_put_domains_state(power_domains); |
| } |
| |
| #else |
| |
| static void |
| assert_async_put_domain_masks_disjoint(struct i915_power_domains *power_domains) |
| { |
| } |
| |
| static void |
| verify_async_put_domains_state(struct i915_power_domains *power_domains) |
| { |
| } |
| |
| #endif /* CONFIG_DRM_I915_DEBUG_RUNTIME_PM */ |
| |
| static void async_put_domains_mask(struct i915_power_domains *power_domains, |
| struct intel_power_domain_mask *mask) |
| |
| { |
| assert_async_put_domain_masks_disjoint(power_domains); |
| |
| __async_put_domains_mask(power_domains, mask); |
| } |
| |
| static void |
| async_put_domains_clear_domain(struct i915_power_domains *power_domains, |
| enum intel_display_power_domain domain) |
| { |
| assert_async_put_domain_masks_disjoint(power_domains); |
| |
| clear_bit(domain, power_domains->async_put_domains[0].bits); |
| clear_bit(domain, power_domains->async_put_domains[1].bits); |
| } |
| |
| static void |
| cancel_async_put_work(struct i915_power_domains *power_domains, bool sync) |
| { |
| if (sync) |
| cancel_delayed_work_sync(&power_domains->async_put_work); |
| else |
| cancel_delayed_work(&power_domains->async_put_work); |
| |
| power_domains->async_put_next_delay = 0; |
| } |
| |
| static bool |
| intel_display_power_grab_async_put_ref(struct drm_i915_private *dev_priv, |
| enum intel_display_power_domain domain) |
| { |
| struct i915_power_domains *power_domains = &dev_priv->display.power.domains; |
| struct intel_power_domain_mask async_put_mask; |
| bool ret = false; |
| |
| async_put_domains_mask(power_domains, &async_put_mask); |
| if (!test_bit(domain, async_put_mask.bits)) |
| goto out_verify; |
| |
| async_put_domains_clear_domain(power_domains, domain); |
| |
| ret = true; |
| |
| async_put_domains_mask(power_domains, &async_put_mask); |
| if (!bitmap_empty(async_put_mask.bits, POWER_DOMAIN_NUM)) |
| goto out_verify; |
| |
| cancel_async_put_work(power_domains, false); |
| intel_runtime_pm_put_raw(&dev_priv->runtime_pm, |
| fetch_and_zero(&power_domains->async_put_wakeref)); |
| out_verify: |
| verify_async_put_domains_state(power_domains); |
| |
| return ret; |
| } |
| |
| static void |
| __intel_display_power_get_domain(struct drm_i915_private *dev_priv, |
| enum intel_display_power_domain domain) |
| { |
| struct i915_power_domains *power_domains = &dev_priv->display.power.domains; |
| struct i915_power_well *power_well; |
| |
| if (intel_display_power_grab_async_put_ref(dev_priv, domain)) |
| return; |
| |
| for_each_power_domain_well(dev_priv, power_well, domain) |
| intel_power_well_get(dev_priv, power_well); |
| |
| power_domains->domain_use_count[domain]++; |
| } |
| |
| /** |
| * intel_display_power_get - grab a power domain reference |
| * @dev_priv: i915 device instance |
| * @domain: power domain to reference |
| * |
| * This function grabs a power domain reference for @domain and ensures that the |
| * power domain and all its parents are powered up. Therefore users should only |
| * grab a reference to the innermost power domain they need. |
| * |
| * Any power domain reference obtained by this function must have a symmetric |
| * call to intel_display_power_put() to release the reference again. |
| */ |
| intel_wakeref_t intel_display_power_get(struct drm_i915_private *dev_priv, |
| enum intel_display_power_domain domain) |
| { |
| struct i915_power_domains *power_domains = &dev_priv->display.power.domains; |
| intel_wakeref_t wakeref = intel_runtime_pm_get(&dev_priv->runtime_pm); |
| |
| mutex_lock(&power_domains->lock); |
| __intel_display_power_get_domain(dev_priv, domain); |
| mutex_unlock(&power_domains->lock); |
| |
| return wakeref; |
| } |
| |
| /** |
| * intel_display_power_get_if_enabled - grab a reference for an enabled display power domain |
| * @dev_priv: i915 device instance |
| * @domain: power domain to reference |
| * |
| * This function grabs a power domain reference for @domain and ensures that the |
| * power domain and all its parents are powered up. Therefore users should only |
| * grab a reference to the innermost power domain they need. |
| * |
| * Any power domain reference obtained by this function must have a symmetric |
| * call to intel_display_power_put() to release the reference again. |
| */ |
| intel_wakeref_t |
| intel_display_power_get_if_enabled(struct drm_i915_private *dev_priv, |
| enum intel_display_power_domain domain) |
| { |
| struct i915_power_domains *power_domains = &dev_priv->display.power.domains; |
| intel_wakeref_t wakeref; |
| bool is_enabled; |
| |
| wakeref = intel_runtime_pm_get_if_in_use(&dev_priv->runtime_pm); |
| if (!wakeref) |
| return false; |
| |
| mutex_lock(&power_domains->lock); |
| |
| if (__intel_display_power_is_enabled(dev_priv, domain)) { |
| __intel_display_power_get_domain(dev_priv, domain); |
| is_enabled = true; |
| } else { |
| is_enabled = false; |
| } |
| |
| mutex_unlock(&power_domains->lock); |
| |
| if (!is_enabled) { |
| intel_runtime_pm_put(&dev_priv->runtime_pm, wakeref); |
| wakeref = 0; |
| } |
| |
| return wakeref; |
| } |
| |
| static void |
| __intel_display_power_put_domain(struct drm_i915_private *dev_priv, |
| enum intel_display_power_domain domain) |
| { |
| struct i915_power_domains *power_domains; |
| struct i915_power_well *power_well; |
| const char *name = intel_display_power_domain_str(domain); |
| struct intel_power_domain_mask async_put_mask; |
| |
| power_domains = &dev_priv->display.power.domains; |
| |
| drm_WARN(&dev_priv->drm, !power_domains->domain_use_count[domain], |
| "Use count on domain %s is already zero\n", |
| name); |
| async_put_domains_mask(power_domains, &async_put_mask); |
| drm_WARN(&dev_priv->drm, |
| test_bit(domain, async_put_mask.bits), |
| "Async disabling of domain %s is pending\n", |
| name); |
| |
| power_domains->domain_use_count[domain]--; |
| |
| for_each_power_domain_well_reverse(dev_priv, power_well, domain) |
| intel_power_well_put(dev_priv, power_well); |
| } |
| |
| static void __intel_display_power_put(struct drm_i915_private *dev_priv, |
| enum intel_display_power_domain domain) |
| { |
| struct i915_power_domains *power_domains = &dev_priv->display.power.domains; |
| |
| mutex_lock(&power_domains->lock); |
| __intel_display_power_put_domain(dev_priv, domain); |
| mutex_unlock(&power_domains->lock); |
| } |
| |
| static void |
| queue_async_put_domains_work(struct i915_power_domains *power_domains, |
| intel_wakeref_t wakeref, |
| int delay_ms) |
| { |
| struct drm_i915_private *i915 = container_of(power_domains, |
| struct drm_i915_private, |
| display.power.domains); |
| drm_WARN_ON(&i915->drm, power_domains->async_put_wakeref); |
| power_domains->async_put_wakeref = wakeref; |
| drm_WARN_ON(&i915->drm, !queue_delayed_work(system_unbound_wq, |
| &power_domains->async_put_work, |
| msecs_to_jiffies(delay_ms))); |
| } |
| |
| static void |
| release_async_put_domains(struct i915_power_domains *power_domains, |
| struct intel_power_domain_mask *mask) |
| { |
| struct drm_i915_private *dev_priv = |
| container_of(power_domains, struct drm_i915_private, |
| display.power.domains); |
| struct intel_runtime_pm *rpm = &dev_priv->runtime_pm; |
| enum intel_display_power_domain domain; |
| intel_wakeref_t wakeref; |
| |
| wakeref = intel_runtime_pm_get_noresume(rpm); |
| |
| for_each_power_domain(domain, mask) { |
| /* Clear before put, so put's sanity check is happy. */ |
| async_put_domains_clear_domain(power_domains, domain); |
| __intel_display_power_put_domain(dev_priv, domain); |
| } |
| |
| intel_runtime_pm_put(rpm, wakeref); |
| } |
| |
| static void |
| intel_display_power_put_async_work(struct work_struct *work) |
| { |
| struct drm_i915_private *dev_priv = |
| container_of(work, struct drm_i915_private, |
| display.power.domains.async_put_work.work); |
| struct i915_power_domains *power_domains = &dev_priv->display.power.domains; |
| struct intel_runtime_pm *rpm = &dev_priv->runtime_pm; |
| intel_wakeref_t new_work_wakeref = intel_runtime_pm_get_raw(rpm); |
| intel_wakeref_t old_work_wakeref = 0; |
| |
| mutex_lock(&power_domains->lock); |
| |
| /* |
| * Bail out if all the domain refs pending to be released were grabbed |
| * by subsequent gets or a flush_work. |
| */ |
| old_work_wakeref = fetch_and_zero(&power_domains->async_put_wakeref); |
| if (!old_work_wakeref) |
| goto out_verify; |
| |
| release_async_put_domains(power_domains, |
| &power_domains->async_put_domains[0]); |
| |
| /* |
| * Cancel the work that got queued after this one got dequeued, |
| * since here we released the corresponding async-put reference. |
| */ |
| cancel_async_put_work(power_domains, false); |
| |
| /* Requeue the work if more domains were async put meanwhile. */ |
| if (!bitmap_empty(power_domains->async_put_domains[1].bits, POWER_DOMAIN_NUM)) { |
| bitmap_copy(power_domains->async_put_domains[0].bits, |
| power_domains->async_put_domains[1].bits, |
| POWER_DOMAIN_NUM); |
| bitmap_zero(power_domains->async_put_domains[1].bits, |
| POWER_DOMAIN_NUM); |
| queue_async_put_domains_work(power_domains, |
| fetch_and_zero(&new_work_wakeref), |
| power_domains->async_put_next_delay); |
| power_domains->async_put_next_delay = 0; |
| } |
| |
| out_verify: |
| verify_async_put_domains_state(power_domains); |
| |
| mutex_unlock(&power_domains->lock); |
| |
| if (old_work_wakeref) |
| intel_runtime_pm_put_raw(rpm, old_work_wakeref); |
| if (new_work_wakeref) |
| intel_runtime_pm_put_raw(rpm, new_work_wakeref); |
| } |
| |
| /** |
| * __intel_display_power_put_async - release a power domain reference asynchronously |
| * @i915: i915 device instance |
| * @domain: power domain to reference |
| * @wakeref: wakeref acquired for the reference that is being released |
| * @delay_ms: delay of powering down the power domain |
| * |
| * This function drops the power domain reference obtained by |
| * intel_display_power_get*() and schedules a work to power down the |
| * corresponding hardware block if this is the last reference. |
| * The power down is delayed by @delay_ms if this is >= 0, or by a default |
| * 100 ms otherwise. |
| */ |
| void __intel_display_power_put_async(struct drm_i915_private *i915, |
| enum intel_display_power_domain domain, |
| intel_wakeref_t wakeref, |
| int delay_ms) |
| { |
| struct i915_power_domains *power_domains = &i915->display.power.domains; |
| struct intel_runtime_pm *rpm = &i915->runtime_pm; |
| intel_wakeref_t work_wakeref = intel_runtime_pm_get_raw(rpm); |
| |
| delay_ms = delay_ms >= 0 ? delay_ms : 100; |
| |
| mutex_lock(&power_domains->lock); |
| |
| if (power_domains->domain_use_count[domain] > 1) { |
| __intel_display_power_put_domain(i915, domain); |
| |
| goto out_verify; |
| } |
| |
| drm_WARN_ON(&i915->drm, power_domains->domain_use_count[domain] != 1); |
| |
| /* Let a pending work requeue itself or queue a new one. */ |
| if (power_domains->async_put_wakeref) { |
| set_bit(domain, power_domains->async_put_domains[1].bits); |
| power_domains->async_put_next_delay = max(power_domains->async_put_next_delay, |
| delay_ms); |
| } else { |
| set_bit(domain, power_domains->async_put_domains[0].bits); |
| queue_async_put_domains_work(power_domains, |
| fetch_and_zero(&work_wakeref), |
| delay_ms); |
| } |
| |
| out_verify: |
| verify_async_put_domains_state(power_domains); |
| |
| mutex_unlock(&power_domains->lock); |
| |
| if (work_wakeref) |
| intel_runtime_pm_put_raw(rpm, work_wakeref); |
| |
| intel_runtime_pm_put(rpm, wakeref); |
| } |
| |
| /** |
| * intel_display_power_flush_work - flushes the async display power disabling work |
| * @i915: i915 device instance |
| * |
| * Flushes any pending work that was scheduled by a preceding |
| * intel_display_power_put_async() call, completing the disabling of the |
| * corresponding power domains. |
| * |
| * Note that the work handler function may still be running after this |
| * function returns; to ensure that the work handler isn't running use |
| * intel_display_power_flush_work_sync() instead. |
| */ |
| void intel_display_power_flush_work(struct drm_i915_private *i915) |
| { |
| struct i915_power_domains *power_domains = &i915->display.power.domains; |
| struct intel_power_domain_mask async_put_mask; |
| intel_wakeref_t work_wakeref; |
| |
| mutex_lock(&power_domains->lock); |
| |
| work_wakeref = fetch_and_zero(&power_domains->async_put_wakeref); |
| if (!work_wakeref) |
| goto out_verify; |
| |
| async_put_domains_mask(power_domains, &async_put_mask); |
| release_async_put_domains(power_domains, &async_put_mask); |
| cancel_async_put_work(power_domains, false); |
| |
| out_verify: |
| verify_async_put_domains_state(power_domains); |
| |
| mutex_unlock(&power_domains->lock); |
| |
| if (work_wakeref) |
| intel_runtime_pm_put_raw(&i915->runtime_pm, work_wakeref); |
| } |
| |
| /** |
| * intel_display_power_flush_work_sync - flushes and syncs the async display power disabling work |
| * @i915: i915 device instance |
| * |
| * Like intel_display_power_flush_work(), but also ensure that the work |
| * handler function is not running any more when this function returns. |
| */ |
| static void |
| intel_display_power_flush_work_sync(struct drm_i915_private *i915) |
| { |
| struct i915_power_domains *power_domains = &i915->display.power.domains; |
| |
| intel_display_power_flush_work(i915); |
| cancel_async_put_work(power_domains, true); |
| |
| verify_async_put_domains_state(power_domains); |
| |
| drm_WARN_ON(&i915->drm, power_domains->async_put_wakeref); |
| } |
| |
| #if IS_ENABLED(CONFIG_DRM_I915_DEBUG_RUNTIME_PM) |
| /** |
| * intel_display_power_put - release a power domain reference |
| * @dev_priv: i915 device instance |
| * @domain: power domain to reference |
| * @wakeref: wakeref acquired for the reference that is being released |
| * |
| * This function drops the power domain reference obtained by |
| * intel_display_power_get() and might power down the corresponding hardware |
| * block right away if this is the last reference. |
| */ |
| void intel_display_power_put(struct drm_i915_private *dev_priv, |
| enum intel_display_power_domain domain, |
| intel_wakeref_t wakeref) |
| { |
| __intel_display_power_put(dev_priv, domain); |
| intel_runtime_pm_put(&dev_priv->runtime_pm, wakeref); |
| } |
| #else |
| /** |
| * intel_display_power_put_unchecked - release an unchecked power domain reference |
| * @dev_priv: i915 device instance |
| * @domain: power domain to reference |
| * |
| * This function drops the power domain reference obtained by |
| * intel_display_power_get() and might power down the corresponding hardware |
| * block right away if this is the last reference. |
| * |
| * This function is only for the power domain code's internal use to suppress wakeref |
| * tracking when the correspondig debug kconfig option is disabled, should not |
| * be used otherwise. |
| */ |
| void intel_display_power_put_unchecked(struct drm_i915_private *dev_priv, |
| enum intel_display_power_domain domain) |
| { |
| __intel_display_power_put(dev_priv, domain); |
| intel_runtime_pm_put_unchecked(&dev_priv->runtime_pm); |
| } |
| #endif |
| |
| void |
| intel_display_power_get_in_set(struct drm_i915_private *i915, |
| struct intel_display_power_domain_set *power_domain_set, |
| enum intel_display_power_domain domain) |
| { |
| intel_wakeref_t __maybe_unused wf; |
| |
| drm_WARN_ON(&i915->drm, test_bit(domain, power_domain_set->mask.bits)); |
| |
| wf = intel_display_power_get(i915, domain); |
| #if IS_ENABLED(CONFIG_DRM_I915_DEBUG_RUNTIME_PM) |
| power_domain_set->wakerefs[domain] = wf; |
| #endif |
| set_bit(domain, power_domain_set->mask.bits); |
| } |
| |
| bool |
| intel_display_power_get_in_set_if_enabled(struct drm_i915_private *i915, |
| struct intel_display_power_domain_set *power_domain_set, |
| enum intel_display_power_domain domain) |
| { |
| intel_wakeref_t wf; |
| |
| drm_WARN_ON(&i915->drm, test_bit(domain, power_domain_set->mask.bits)); |
| |
| wf = intel_display_power_get_if_enabled(i915, domain); |
| if (!wf) |
| return false; |
| |
| #if IS_ENABLED(CONFIG_DRM_I915_DEBUG_RUNTIME_PM) |
| power_domain_set->wakerefs[domain] = wf; |
| #endif |
| set_bit(domain, power_domain_set->mask.bits); |
| |
| return true; |
| } |
| |
| void |
| intel_display_power_put_mask_in_set(struct drm_i915_private *i915, |
| struct intel_display_power_domain_set *power_domain_set, |
| struct intel_power_domain_mask *mask) |
| { |
| enum intel_display_power_domain domain; |
| |
| drm_WARN_ON(&i915->drm, |
| !bitmap_subset(mask->bits, power_domain_set->mask.bits, POWER_DOMAIN_NUM)); |
| |
| for_each_power_domain(domain, mask) { |
| intel_wakeref_t __maybe_unused wf = -1; |
| |
| #if IS_ENABLED(CONFIG_DRM_I915_DEBUG_RUNTIME_PM) |
| wf = fetch_and_zero(&power_domain_set->wakerefs[domain]); |
| #endif |
| intel_display_power_put(i915, domain, wf); |
| clear_bit(domain, power_domain_set->mask.bits); |
| } |
| } |
| |
| static int |
| sanitize_disable_power_well_option(const struct drm_i915_private *dev_priv, |
| int disable_power_well) |
| { |
| if (disable_power_well >= 0) |
| return !!disable_power_well; |
| |
| return 1; |
| } |
| |
| static u32 get_allowed_dc_mask(const struct drm_i915_private *dev_priv, |
| int enable_dc) |
| { |
| u32 mask; |
| int requested_dc; |
| int max_dc; |
| |
| if (!HAS_DISPLAY(dev_priv)) |
| return 0; |
| |
| if (DISPLAY_VER(dev_priv) >= 20) |
| max_dc = 2; |
| else if (IS_DG2(dev_priv)) |
| max_dc = 1; |
| else if (IS_DG1(dev_priv)) |
| max_dc = 3; |
| else if (DISPLAY_VER(dev_priv) >= 12) |
| max_dc = 4; |
| else if (IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv)) |
| max_dc = 1; |
| else if (DISPLAY_VER(dev_priv) >= 9) |
| max_dc = 2; |
| else |
| max_dc = 0; |
| |
| /* |
| * DC9 has a separate HW flow from the rest of the DC states, |
| * not depending on the DMC firmware. It's needed by system |
| * suspend/resume, so allow it unconditionally. |
| */ |
| mask = IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv) || |
| DISPLAY_VER(dev_priv) >= 11 ? |
| DC_STATE_EN_DC9 : 0; |
| |
| if (!dev_priv->display.params.disable_power_well) |
| max_dc = 0; |
| |
| if (enable_dc >= 0 && enable_dc <= max_dc) { |
| requested_dc = enable_dc; |
| } else if (enable_dc == -1) { |
| requested_dc = max_dc; |
| } else if (enable_dc > max_dc && enable_dc <= 4) { |
| drm_dbg_kms(&dev_priv->drm, |
| "Adjusting requested max DC state (%d->%d)\n", |
| enable_dc, max_dc); |
| requested_dc = max_dc; |
| } else { |
| drm_err(&dev_priv->drm, |
| "Unexpected value for enable_dc (%d)\n", enable_dc); |
| requested_dc = max_dc; |
| } |
| |
| switch (requested_dc) { |
| case 4: |
| mask |= DC_STATE_EN_DC3CO | DC_STATE_EN_UPTO_DC6; |
| break; |
| case 3: |
| mask |= DC_STATE_EN_DC3CO | DC_STATE_EN_UPTO_DC5; |
| break; |
| case 2: |
| mask |= DC_STATE_EN_UPTO_DC6; |
| break; |
| case 1: |
| mask |= DC_STATE_EN_UPTO_DC5; |
| break; |
| } |
| |
| drm_dbg_kms(&dev_priv->drm, "Allowed DC state mask %02x\n", mask); |
| |
| return mask; |
| } |
| |
| /** |
| * intel_power_domains_init - initializes the power domain structures |
| * @dev_priv: i915 device instance |
| * |
| * Initializes the power domain structures for @dev_priv depending upon the |
| * supported platform. |
| */ |
| int intel_power_domains_init(struct drm_i915_private *dev_priv) |
| { |
| struct i915_power_domains *power_domains = &dev_priv->display.power.domains; |
| |
| dev_priv->display.params.disable_power_well = |
| sanitize_disable_power_well_option(dev_priv, |
| dev_priv->display.params.disable_power_well); |
| power_domains->allowed_dc_mask = |
| get_allowed_dc_mask(dev_priv, dev_priv->display.params.enable_dc); |
| |
| power_domains->target_dc_state = |
| sanitize_target_dc_state(dev_priv, DC_STATE_EN_UPTO_DC6); |
| |
| mutex_init(&power_domains->lock); |
| |
| INIT_DELAYED_WORK(&power_domains->async_put_work, |
| intel_display_power_put_async_work); |
| |
| return intel_display_power_map_init(power_domains); |
| } |
| |
| /** |
| * intel_power_domains_cleanup - clean up power domains resources |
| * @dev_priv: i915 device instance |
| * |
| * Release any resources acquired by intel_power_domains_init() |
| */ |
| void intel_power_domains_cleanup(struct drm_i915_private *dev_priv) |
| { |
| intel_display_power_map_cleanup(&dev_priv->display.power.domains); |
| } |
| |
| static void intel_power_domains_sync_hw(struct drm_i915_private *dev_priv) |
| { |
| struct i915_power_domains *power_domains = &dev_priv->display.power.domains; |
| struct i915_power_well *power_well; |
| |
| mutex_lock(&power_domains->lock); |
| for_each_power_well(dev_priv, power_well) |
| intel_power_well_sync_hw(dev_priv, power_well); |
| mutex_unlock(&power_domains->lock); |
| } |
| |
| static void gen9_dbuf_slice_set(struct drm_i915_private *dev_priv, |
| enum dbuf_slice slice, bool enable) |
| { |
| i915_reg_t reg = DBUF_CTL_S(slice); |
| bool state; |
| |
| intel_de_rmw(dev_priv, reg, DBUF_POWER_REQUEST, |
| enable ? DBUF_POWER_REQUEST : 0); |
| intel_de_posting_read(dev_priv, reg); |
| udelay(10); |
| |
| state = intel_de_read(dev_priv, reg) & DBUF_POWER_STATE; |
| drm_WARN(&dev_priv->drm, enable != state, |
| "DBuf slice %d power %s timeout!\n", |
| slice, str_enable_disable(enable)); |
| } |
| |
| void gen9_dbuf_slices_update(struct drm_i915_private *dev_priv, |
| u8 req_slices) |
| { |
| struct i915_power_domains *power_domains = &dev_priv->display.power.domains; |
| u8 slice_mask = DISPLAY_INFO(dev_priv)->dbuf.slice_mask; |
| enum dbuf_slice slice; |
| |
| drm_WARN(&dev_priv->drm, req_slices & ~slice_mask, |
| "Invalid set of dbuf slices (0x%x) requested (total dbuf slices 0x%x)\n", |
| req_slices, slice_mask); |
| |
| drm_dbg_kms(&dev_priv->drm, "Updating dbuf slices to 0x%x\n", |
| req_slices); |
| |
| /* |
| * Might be running this in parallel to gen9_dc_off_power_well_enable |
| * being called from intel_dp_detect for instance, |
| * which causes assertion triggered by race condition, |
| * as gen9_assert_dbuf_enabled might preempt this when registers |
| * were already updated, while dev_priv was not. |
| */ |
| mutex_lock(&power_domains->lock); |
| |
| for_each_dbuf_slice(dev_priv, slice) |
| gen9_dbuf_slice_set(dev_priv, slice, req_slices & BIT(slice)); |
| |
| dev_priv->display.dbuf.enabled_slices = req_slices; |
| |
| mutex_unlock(&power_domains->lock); |
| } |
| |
| static void gen9_dbuf_enable(struct drm_i915_private *dev_priv) |
| { |
| u8 slices_mask; |
| |
| dev_priv->display.dbuf.enabled_slices = |
| intel_enabled_dbuf_slices_mask(dev_priv); |
| |
| slices_mask = BIT(DBUF_S1) | dev_priv->display.dbuf.enabled_slices; |
| |
| if (DISPLAY_VER(dev_priv) >= 14) |
| intel_pmdemand_program_dbuf(dev_priv, slices_mask); |
| |
| /* |
| * Just power up at least 1 slice, we will |
| * figure out later which slices we have and what we need. |
| */ |
| gen9_dbuf_slices_update(dev_priv, slices_mask); |
| } |
| |
| static void gen9_dbuf_disable(struct drm_i915_private *dev_priv) |
| { |
| gen9_dbuf_slices_update(dev_priv, 0); |
| |
| if (DISPLAY_VER(dev_priv) >= 14) |
| intel_pmdemand_program_dbuf(dev_priv, 0); |
| } |
| |
| static void gen12_dbuf_slices_config(struct drm_i915_private *dev_priv) |
| { |
| enum dbuf_slice slice; |
| |
| if (IS_ALDERLAKE_P(dev_priv)) |
| return; |
| |
| for_each_dbuf_slice(dev_priv, slice) |
| intel_de_rmw(dev_priv, DBUF_CTL_S(slice), |
| DBUF_TRACKER_STATE_SERVICE_MASK, |
| DBUF_TRACKER_STATE_SERVICE(8)); |
| } |
| |
| static void icl_mbus_init(struct drm_i915_private *dev_priv) |
| { |
| unsigned long abox_regs = DISPLAY_INFO(dev_priv)->abox_mask; |
| u32 mask, val, i; |
| |
| if (IS_ALDERLAKE_P(dev_priv) || DISPLAY_VER(dev_priv) >= 14) |
| return; |
| |
| mask = MBUS_ABOX_BT_CREDIT_POOL1_MASK | |
| MBUS_ABOX_BT_CREDIT_POOL2_MASK | |
| MBUS_ABOX_B_CREDIT_MASK | |
| MBUS_ABOX_BW_CREDIT_MASK; |
| val = MBUS_ABOX_BT_CREDIT_POOL1(16) | |
| MBUS_ABOX_BT_CREDIT_POOL2(16) | |
| MBUS_ABOX_B_CREDIT(1) | |
| MBUS_ABOX_BW_CREDIT(1); |
| |
| /* |
| * gen12 platforms that use abox1 and abox2 for pixel data reads still |
| * expect us to program the abox_ctl0 register as well, even though |
| * we don't have to program other instance-0 registers like BW_BUDDY. |
| */ |
| if (DISPLAY_VER(dev_priv) == 12) |
| abox_regs |= BIT(0); |
| |
| for_each_set_bit(i, &abox_regs, sizeof(abox_regs)) |
| intel_de_rmw(dev_priv, MBUS_ABOX_CTL(i), mask, val); |
| } |
| |
| static void hsw_assert_cdclk(struct drm_i915_private *dev_priv) |
| { |
| u32 val = intel_de_read(dev_priv, LCPLL_CTL); |
| |
| /* |
| * The LCPLL register should be turned on by the BIOS. For now |
| * let's just check its state and print errors in case |
| * something is wrong. Don't even try to turn it on. |
| */ |
| |
| if (val & LCPLL_CD_SOURCE_FCLK) |
| drm_err(&dev_priv->drm, "CDCLK source is not LCPLL\n"); |
| |
| if (val & LCPLL_PLL_DISABLE) |
| drm_err(&dev_priv->drm, "LCPLL is disabled\n"); |
| |
| if ((val & LCPLL_REF_MASK) != LCPLL_REF_NON_SSC) |
| drm_err(&dev_priv->drm, "LCPLL not using non-SSC reference\n"); |
| } |
| |
| static void assert_can_disable_lcpll(struct drm_i915_private *dev_priv) |
| { |
| struct intel_crtc *crtc; |
| |
| for_each_intel_crtc(&dev_priv->drm, crtc) |
| I915_STATE_WARN(dev_priv, crtc->active, |
| "CRTC for pipe %c enabled\n", |
| pipe_name(crtc->pipe)); |
| |
| I915_STATE_WARN(dev_priv, intel_de_read(dev_priv, HSW_PWR_WELL_CTL2), |
| "Display power well on\n"); |
| I915_STATE_WARN(dev_priv, |
| intel_de_read(dev_priv, SPLL_CTL) & SPLL_PLL_ENABLE, |
| "SPLL enabled\n"); |
| I915_STATE_WARN(dev_priv, |
| intel_de_read(dev_priv, WRPLL_CTL(0)) & WRPLL_PLL_ENABLE, |
| "WRPLL1 enabled\n"); |
| I915_STATE_WARN(dev_priv, |
| intel_de_read(dev_priv, WRPLL_CTL(1)) & WRPLL_PLL_ENABLE, |
| "WRPLL2 enabled\n"); |
| I915_STATE_WARN(dev_priv, |
| intel_de_read(dev_priv, PP_STATUS(dev_priv, 0)) & PP_ON, |
| "Panel power on\n"); |
| I915_STATE_WARN(dev_priv, |
| intel_de_read(dev_priv, BLC_PWM_CPU_CTL2) & BLM_PWM_ENABLE, |
| "CPU PWM1 enabled\n"); |
| if (IS_HASWELL(dev_priv)) |
| I915_STATE_WARN(dev_priv, |
| intel_de_read(dev_priv, HSW_BLC_PWM2_CTL) & BLM_PWM_ENABLE, |
| "CPU PWM2 enabled\n"); |
| I915_STATE_WARN(dev_priv, |
| intel_de_read(dev_priv, BLC_PWM_PCH_CTL1) & BLM_PCH_PWM_ENABLE, |
| "PCH PWM1 enabled\n"); |
| I915_STATE_WARN(dev_priv, |
| (intel_de_read(dev_priv, UTIL_PIN_CTL) & (UTIL_PIN_ENABLE | UTIL_PIN_MODE_MASK)) == (UTIL_PIN_ENABLE | UTIL_PIN_MODE_PWM), |
| "Utility pin enabled in PWM mode\n"); |
| I915_STATE_WARN(dev_priv, |
| intel_de_read(dev_priv, PCH_GTC_CTL) & PCH_GTC_ENABLE, |
| "PCH GTC enabled\n"); |
| |
| /* |
| * In theory we can still leave IRQs enabled, as long as only the HPD |
| * interrupts remain enabled. We used to check for that, but since it's |
| * gen-specific and since we only disable LCPLL after we fully disable |
| * the interrupts, the check below should be enough. |
| */ |
| I915_STATE_WARN(dev_priv, intel_irqs_enabled(dev_priv), |
| "IRQs enabled\n"); |
| } |
| |
| static u32 hsw_read_dcomp(struct drm_i915_private *dev_priv) |
| { |
| if (IS_HASWELL(dev_priv)) |
| return intel_de_read(dev_priv, D_COMP_HSW); |
| else |
| return intel_de_read(dev_priv, D_COMP_BDW); |
| } |
| |
| static void hsw_write_dcomp(struct drm_i915_private *dev_priv, u32 val) |
| { |
| if (IS_HASWELL(dev_priv)) { |
| if (snb_pcode_write(&dev_priv->uncore, GEN6_PCODE_WRITE_D_COMP, val)) |
| drm_dbg_kms(&dev_priv->drm, |
| "Failed to write to D_COMP\n"); |
| } else { |
| intel_de_write(dev_priv, D_COMP_BDW, val); |
| intel_de_posting_read(dev_priv, D_COMP_BDW); |
| } |
| } |
| |
| /* |
| * This function implements pieces of two sequences from BSpec: |
| * - Sequence for display software to disable LCPLL |
| * - Sequence for display software to allow package C8+ |
| * The steps implemented here are just the steps that actually touch the LCPLL |
| * register. Callers should take care of disabling all the display engine |
| * functions, doing the mode unset, fixing interrupts, etc. |
| */ |
| static void hsw_disable_lcpll(struct drm_i915_private *dev_priv, |
| bool switch_to_fclk, bool allow_power_down) |
| { |
| u32 val; |
| |
| assert_can_disable_lcpll(dev_priv); |
| |
| val = intel_de_read(dev_priv, LCPLL_CTL); |
| |
| if (switch_to_fclk) { |
| val |= LCPLL_CD_SOURCE_FCLK; |
| intel_de_write(dev_priv, LCPLL_CTL, val); |
| |
| if (wait_for_us(intel_de_read(dev_priv, LCPLL_CTL) & |
| LCPLL_CD_SOURCE_FCLK_DONE, 1)) |
| drm_err(&dev_priv->drm, "Switching to FCLK failed\n"); |
| |
| val = intel_de_read(dev_priv, LCPLL_CTL); |
| } |
| |
| val |= LCPLL_PLL_DISABLE; |
| intel_de_write(dev_priv, LCPLL_CTL, val); |
| intel_de_posting_read(dev_priv, LCPLL_CTL); |
| |
| if (intel_de_wait_for_clear(dev_priv, LCPLL_CTL, LCPLL_PLL_LOCK, 1)) |
| drm_err(&dev_priv->drm, "LCPLL still locked\n"); |
| |
| val = hsw_read_dcomp(dev_priv); |
| val |= D_COMP_COMP_DISABLE; |
| hsw_write_dcomp(dev_priv, val); |
| ndelay(100); |
| |
| if (wait_for((hsw_read_dcomp(dev_priv) & |
| D_COMP_RCOMP_IN_PROGRESS) == 0, 1)) |
| drm_err(&dev_priv->drm, "D_COMP RCOMP still in progress\n"); |
| |
| if (allow_power_down) { |
| intel_de_rmw(dev_priv, LCPLL_CTL, 0, LCPLL_POWER_DOWN_ALLOW); |
| intel_de_posting_read(dev_priv, LCPLL_CTL); |
| } |
| } |
| |
| /* |
| * Fully restores LCPLL, disallowing power down and switching back to LCPLL |
| * source. |
| */ |
| static void hsw_restore_lcpll(struct drm_i915_private *dev_priv) |
| { |
| u32 val; |
| |
| val = intel_de_read(dev_priv, LCPLL_CTL); |
| |
| if ((val & (LCPLL_PLL_LOCK | LCPLL_PLL_DISABLE | LCPLL_CD_SOURCE_FCLK | |
| LCPLL_POWER_DOWN_ALLOW)) == LCPLL_PLL_LOCK) |
| return; |
| |
| /* |
| * Make sure we're not on PC8 state before disabling PC8, otherwise |
| * we'll hang the machine. To prevent PC8 state, just enable force_wake. |
| */ |
| intel_uncore_forcewake_get(&dev_priv->uncore, FORCEWAKE_ALL); |
| |
| if (val & LCPLL_POWER_DOWN_ALLOW) { |
| val &= ~LCPLL_POWER_DOWN_ALLOW; |
| intel_de_write(dev_priv, LCPLL_CTL, val); |
| intel_de_posting_read(dev_priv, LCPLL_CTL); |
| } |
| |
| val = hsw_read_dcomp(dev_priv); |
| val |= D_COMP_COMP_FORCE; |
| val &= ~D_COMP_COMP_DISABLE; |
| hsw_write_dcomp(dev_priv, val); |
| |
| val = intel_de_read(dev_priv, LCPLL_CTL); |
| val &= ~LCPLL_PLL_DISABLE; |
| intel_de_write(dev_priv, LCPLL_CTL, val); |
| |
| if (intel_de_wait_for_set(dev_priv, LCPLL_CTL, LCPLL_PLL_LOCK, 5)) |
| drm_err(&dev_priv->drm, "LCPLL not locked yet\n"); |
| |
| if (val & LCPLL_CD_SOURCE_FCLK) { |
| intel_de_rmw(dev_priv, LCPLL_CTL, LCPLL_CD_SOURCE_FCLK, 0); |
| |
| if (wait_for_us((intel_de_read(dev_priv, LCPLL_CTL) & |
| LCPLL_CD_SOURCE_FCLK_DONE) == 0, 1)) |
| drm_err(&dev_priv->drm, |
| "Switching back to LCPLL failed\n"); |
| } |
| |
| intel_uncore_forcewake_put(&dev_priv->uncore, FORCEWAKE_ALL); |
| |
| intel_update_cdclk(dev_priv); |
| intel_cdclk_dump_config(dev_priv, &dev_priv->display.cdclk.hw, "Current CDCLK"); |
| } |
| |
| /* |
| * Package states C8 and deeper are really deep PC states that can only be |
| * reached when all the devices on the system allow it, so even if the graphics |
| * device allows PC8+, it doesn't mean the system will actually get to these |
| * states. Our driver only allows PC8+ when going into runtime PM. |
| * |
| * The requirements for PC8+ are that all the outputs are disabled, the power |
| * well is disabled and most interrupts are disabled, and these are also |
| * requirements for runtime PM. When these conditions are met, we manually do |
| * the other conditions: disable the interrupts, clocks and switch LCPLL refclk |
| * to Fclk. If we're in PC8+ and we get an non-hotplug interrupt, we can hard |
| * hang the machine. |
| * |
| * When we really reach PC8 or deeper states (not just when we allow it) we lose |
| * the state of some registers, so when we come back from PC8+ we need to |
| * restore this state. We don't get into PC8+ if we're not in RC6, so we don't |
| * need to take care of the registers kept by RC6. Notice that this happens even |
| * if we don't put the device in PCI D3 state (which is what currently happens |
| * because of the runtime PM support). |
| * |
| * For more, read "Display Sequences for Package C8" on the hardware |
| * documentation. |
| */ |
| static void hsw_enable_pc8(struct drm_i915_private *dev_priv) |
| { |
| drm_dbg_kms(&dev_priv->drm, "Enabling package C8+\n"); |
| |
| if (HAS_PCH_LPT_LP(dev_priv)) |
| intel_de_rmw(dev_priv, SOUTH_DSPCLK_GATE_D, |
| PCH_LP_PARTITION_LEVEL_DISABLE, 0); |
| |
| lpt_disable_clkout_dp(dev_priv); |
| hsw_disable_lcpll(dev_priv, true, true); |
| } |
| |
| static void hsw_disable_pc8(struct drm_i915_private *dev_priv) |
| { |
| drm_dbg_kms(&dev_priv->drm, "Disabling package C8+\n"); |
| |
| hsw_restore_lcpll(dev_priv); |
| intel_init_pch_refclk(dev_priv); |
| |
| /* Many display registers don't survive PC8+ */ |
| intel_clock_gating_init(dev_priv); |
| } |
| |
| static void intel_pch_reset_handshake(struct drm_i915_private *dev_priv, |
| bool enable) |
| { |
| i915_reg_t reg; |
| u32 reset_bits; |
| |
| if (IS_IVYBRIDGE(dev_priv)) { |
| reg = GEN7_MSG_CTL; |
| reset_bits = WAIT_FOR_PCH_FLR_ACK | WAIT_FOR_PCH_RESET_ACK; |
| } else { |
| reg = HSW_NDE_RSTWRN_OPT; |
| reset_bits = RESET_PCH_HANDSHAKE_ENABLE; |
| } |
| |
| if (DISPLAY_VER(dev_priv) >= 14) |
| reset_bits |= MTL_RESET_PICA_HANDSHAKE_EN; |
| |
| intel_de_rmw(dev_priv, reg, reset_bits, enable ? reset_bits : 0); |
| } |
| |
| static void skl_display_core_init(struct drm_i915_private *dev_priv, |
| bool resume) |
| { |
| struct i915_power_domains *power_domains = &dev_priv->display.power.domains; |
| struct i915_power_well *well; |
| |
| gen9_set_dc_state(dev_priv, DC_STATE_DISABLE); |
| |
| /* enable PCH reset handshake */ |
| intel_pch_reset_handshake(dev_priv, !HAS_PCH_NOP(dev_priv)); |
| |
| if (!HAS_DISPLAY(dev_priv)) |
| return; |
| |
| /* enable PG1 and Misc I/O */ |
| mutex_lock(&power_domains->lock); |
| |
| well = lookup_power_well(dev_priv, SKL_DISP_PW_1); |
| intel_power_well_enable(dev_priv, well); |
| |
| well = lookup_power_well(dev_priv, SKL_DISP_PW_MISC_IO); |
| intel_power_well_enable(dev_priv, well); |
| |
| mutex_unlock(&power_domains->lock); |
| |
| intel_cdclk_init_hw(dev_priv); |
| |
| gen9_dbuf_enable(dev_priv); |
| |
| if (resume) |
| intel_dmc_load_program(dev_priv); |
| } |
| |
| static void skl_display_core_uninit(struct drm_i915_private *dev_priv) |
| { |
| struct i915_power_domains *power_domains = &dev_priv->display.power.domains; |
| struct i915_power_well *well; |
| |
| if (!HAS_DISPLAY(dev_priv)) |
| return; |
| |
| gen9_disable_dc_states(dev_priv); |
| /* TODO: disable DMC program */ |
| |
| gen9_dbuf_disable(dev_priv); |
| |
| intel_cdclk_uninit_hw(dev_priv); |
| |
| /* The spec doesn't call for removing the reset handshake flag */ |
| /* disable PG1 and Misc I/O */ |
| |
| mutex_lock(&power_domains->lock); |
| |
| /* |
| * BSpec says to keep the MISC IO power well enabled here, only |
| * remove our request for power well 1. |
| * Note that even though the driver's request is removed power well 1 |
| * may stay enabled after this due to DMC's own request on it. |
| */ |
| well = lookup_power_well(dev_priv, SKL_DISP_PW_1); |
| intel_power_well_disable(dev_priv, well); |
| |
| mutex_unlock(&power_domains->lock); |
| |
| usleep_range(10, 30); /* 10 us delay per Bspec */ |
| } |
| |
| static void bxt_display_core_init(struct drm_i915_private *dev_priv, bool resume) |
| { |
| struct i915_power_domains *power_domains = &dev_priv->display.power.domains; |
| struct i915_power_well *well; |
| |
| gen9_set_dc_state(dev_priv, DC_STATE_DISABLE); |
| |
| /* |
| * NDE_RSTWRN_OPT RST PCH Handshake En must always be 0b on BXT |
| * or else the reset will hang because there is no PCH to respond. |
| * Move the handshake programming to initialization sequence. |
| * Previously was left up to BIOS. |
| */ |
| intel_pch_reset_handshake(dev_priv, false); |
| |
| if (!HAS_DISPLAY(dev_priv)) |
| return; |
| |
| /* Enable PG1 */ |
| mutex_lock(&power_domains->lock); |
| |
| well = lookup_power_well(dev_priv, SKL_DISP_PW_1); |
| intel_power_well_enable(dev_priv, well); |
| |
| mutex_unlock(&power_domains->lock); |
| |
| intel_cdclk_init_hw(dev_priv); |
| |
| gen9_dbuf_enable(dev_priv); |
| |
| if (resume) |
| intel_dmc_load_program(dev_priv); |
| } |
| |
| static void bxt_display_core_uninit(struct drm_i915_private *dev_priv) |
| { |
| struct i915_power_domains *power_domains = &dev_priv->display.power.domains; |
| struct i915_power_well *well; |
| |
| if (!HAS_DISPLAY(dev_priv)) |
| return; |
| |
| gen9_disable_dc_states(dev_priv); |
| /* TODO: disable DMC program */ |
| |
| gen9_dbuf_disable(dev_priv); |
| |
| intel_cdclk_uninit_hw(dev_priv); |
| |
| /* The spec doesn't call for removing the reset handshake flag */ |
| |
| /* |
| * Disable PW1 (PG1). |
| * Note that even though the driver's request is removed power well 1 |
| * may stay enabled after this due to DMC's own request on it. |
| */ |
| mutex_lock(&power_domains->lock); |
| |
| well = lookup_power_well(dev_priv, SKL_DISP_PW_1); |
| intel_power_well_disable(dev_priv, well); |
| |
| mutex_unlock(&power_domains->lock); |
| |
| usleep_range(10, 30); /* 10 us delay per Bspec */ |
| } |
| |
| struct buddy_page_mask { |
| u32 page_mask; |
| u8 type; |
| u8 num_channels; |
| }; |
| |
| static const struct buddy_page_mask tgl_buddy_page_masks[] = { |
| { .num_channels = 1, .type = INTEL_DRAM_DDR4, .page_mask = 0xF }, |
| { .num_channels = 1, .type = INTEL_DRAM_DDR5, .page_mask = 0xF }, |
| { .num_channels = 2, .type = INTEL_DRAM_LPDDR4, .page_mask = 0x1C }, |
| { .num_channels = 2, .type = INTEL_DRAM_LPDDR5, .page_mask = 0x1C }, |
| { .num_channels = 2, .type = INTEL_DRAM_DDR4, .page_mask = 0x1F }, |
| { .num_channels = 2, .type = INTEL_DRAM_DDR5, .page_mask = 0x1E }, |
| { .num_channels = 4, .type = INTEL_DRAM_LPDDR4, .page_mask = 0x38 }, |
| { .num_channels = 4, .type = INTEL_DRAM_LPDDR5, .page_mask = 0x38 }, |
| {} |
| }; |
| |
| static const struct buddy_page_mask wa_1409767108_buddy_page_masks[] = { |
| { .num_channels = 1, .type = INTEL_DRAM_LPDDR4, .page_mask = 0x1 }, |
| { .num_channels = 1, .type = INTEL_DRAM_DDR4, .page_mask = 0x1 }, |
| { .num_channels = 1, .type = INTEL_DRAM_DDR5, .page_mask = 0x1 }, |
| { .num_channels = 1, .type = INTEL_DRAM_LPDDR5, .page_mask = 0x1 }, |
| { .num_channels = 2, .type = INTEL_DRAM_LPDDR4, .page_mask = 0x3 }, |
| { .num_channels = 2, .type = INTEL_DRAM_DDR4, .page_mask = 0x3 }, |
| { .num_channels = 2, .type = INTEL_DRAM_DDR5, .page_mask = 0x3 }, |
| { .num_channels = 2, .type = INTEL_DRAM_LPDDR5, .page_mask = 0x3 }, |
| {} |
| }; |
| |
| static void tgl_bw_buddy_init(struct drm_i915_private *dev_priv) |
| { |
| enum intel_dram_type type = dev_priv->dram_info.type; |
| u8 num_channels = dev_priv->dram_info.num_channels; |
| const struct buddy_page_mask *table; |
| unsigned long abox_mask = DISPLAY_INFO(dev_priv)->abox_mask; |
| int config, i; |
| |
| /* BW_BUDDY registers are not used on dgpu's beyond DG1 */ |
| if (IS_DGFX(dev_priv) && !IS_DG1(dev_priv)) |
| return; |
| |
| if (IS_ALDERLAKE_S(dev_priv) || |
| (IS_ROCKETLAKE(dev_priv) && IS_DISPLAY_STEP(dev_priv, STEP_A0, STEP_B0))) |
| /* Wa_1409767108 */ |
| table = wa_1409767108_buddy_page_masks; |
| else |
| table = tgl_buddy_page_masks; |
| |
| for (config = 0; table[config].page_mask != 0; config++) |
| if (table[config].num_channels == num_channels && |
| table[config].type == type) |
| break; |
| |
| if (table[config].page_mask == 0) { |
| drm_dbg(&dev_priv->drm, |
| "Unknown memory configuration; disabling address buddy logic.\n"); |
| for_each_set_bit(i, &abox_mask, sizeof(abox_mask)) |
| intel_de_write(dev_priv, BW_BUDDY_CTL(i), |
| BW_BUDDY_DISABLE); |
| } else { |
| for_each_set_bit(i, &abox_mask, sizeof(abox_mask)) { |
| intel_de_write(dev_priv, BW_BUDDY_PAGE_MASK(i), |
| table[config].page_mask); |
| |
| /* Wa_22010178259:tgl,dg1,rkl,adl-s */ |
| if (DISPLAY_VER(dev_priv) == 12) |
| intel_de_rmw(dev_priv, BW_BUDDY_CTL(i), |
| BW_BUDDY_TLB_REQ_TIMER_MASK, |
| BW_BUDDY_TLB_REQ_TIMER(0x8)); |
| } |
| } |
| } |
| |
| static void icl_display_core_init(struct drm_i915_private *dev_priv, |
| bool resume) |
| { |
| struct i915_power_domains *power_domains = &dev_priv->display.power.domains; |
| struct i915_power_well *well; |
| |
| gen9_set_dc_state(dev_priv, DC_STATE_DISABLE); |
| |
| /* Wa_14011294188:ehl,jsl,tgl,rkl,adl-s */ |
| if (INTEL_PCH_TYPE(dev_priv) >= PCH_TGP && |
| INTEL_PCH_TYPE(dev_priv) < PCH_DG1) |
| intel_de_rmw(dev_priv, SOUTH_DSPCLK_GATE_D, 0, |
| PCH_DPMGUNIT_CLOCK_GATE_DISABLE); |
| |
| /* 1. Enable PCH reset handshake. */ |
| intel_pch_reset_handshake(dev_priv, !HAS_PCH_NOP(dev_priv)); |
| |
| if (!HAS_DISPLAY(dev_priv)) |
| return; |
| |
| /* 2. Initialize all combo phys */ |
| intel_combo_phy_init(dev_priv); |
| |
| /* |
| * 3. Enable Power Well 1 (PG1). |
| * The AUX IO power wells will be enabled on demand. |
| */ |
| mutex_lock(&power_domains->lock); |
| well = lookup_power_well(dev_priv, SKL_DISP_PW_1); |
| intel_power_well_enable(dev_priv, well); |
| mutex_unlock(&power_domains->lock); |
| |
| if (DISPLAY_VER(dev_priv) == 14) |
| intel_de_rmw(dev_priv, DC_STATE_EN, |
| HOLD_PHY_PG1_LATCH | HOLD_PHY_CLKREQ_PG1_LATCH, 0); |
| |
| /* 4. Enable CDCLK. */ |
| intel_cdclk_init_hw(dev_priv); |
| |
| if (DISPLAY_VER(dev_priv) >= 12) |
| gen12_dbuf_slices_config(dev_priv); |
| |
| /* 5. Enable DBUF. */ |
| gen9_dbuf_enable(dev_priv); |
| |
| /* 6. Setup MBUS. */ |
| icl_mbus_init(dev_priv); |
| |
| /* 7. Program arbiter BW_BUDDY registers */ |
| if (DISPLAY_VER(dev_priv) >= 12) |
| tgl_bw_buddy_init(dev_priv); |
| |
| /* 8. Ensure PHYs have completed calibration and adaptation */ |
| if (IS_DG2(dev_priv)) |
| intel_snps_phy_wait_for_calibration(dev_priv); |
| |
| /* 9. XE2_HPD: Program CHICKEN_MISC_2 before any cursor or planes are enabled */ |
| if (DISPLAY_VER_FULL(dev_priv) == IP_VER(14, 1)) |
| intel_de_rmw(dev_priv, CHICKEN_MISC_2, BMG_DARB_HALF_BLK_END_BURST, 1); |
| |
| if (resume) |
| intel_dmc_load_program(dev_priv); |
| |
| /* Wa_14011508470:tgl,dg1,rkl,adl-s,adl-p,dg2 */ |
| if (IS_DISPLAY_VER_FULL(dev_priv, IP_VER(12, 0), IP_VER(13, 0))) |
| intel_de_rmw(dev_priv, GEN11_CHICKEN_DCPR_2, 0, |
| DCPR_CLEAR_MEMSTAT_DIS | DCPR_SEND_RESP_IMM | |
| DCPR_MASK_LPMODE | DCPR_MASK_MAXLATENCY_MEMUP_CLR); |
| |
| /* Wa_14011503030:xelpd */ |
| if (DISPLAY_VER(dev_priv) == 13) |
| intel_de_write(dev_priv, XELPD_DISPLAY_ERR_FATAL_MASK, ~0); |
| |
| /* Wa_15013987218 */ |
| if (DISPLAY_VER(dev_priv) == 20) { |
| intel_de_rmw(dev_priv, SOUTH_DSPCLK_GATE_D, |
| 0, PCH_GMBUSUNIT_CLOCK_GATE_DISABLE); |
| intel_de_rmw(dev_priv, SOUTH_DSPCLK_GATE_D, |
| PCH_GMBUSUNIT_CLOCK_GATE_DISABLE, 0); |
| } |
| } |
| |
| static void icl_display_core_uninit(struct drm_i915_private *dev_priv) |
| { |
| struct i915_power_domains *power_domains = &dev_priv->display.power.domains; |
| struct i915_power_well *well; |
| |
| if (!HAS_DISPLAY(dev_priv)) |
| return; |
| |
| gen9_disable_dc_states(dev_priv); |
| intel_dmc_disable_program(dev_priv); |
| |
| /* 1. Disable all display engine functions -> aready done */ |
| |
| /* 2. Disable DBUF */ |
| gen9_dbuf_disable(dev_priv); |
| |
| /* 3. Disable CD clock */ |
| intel_cdclk_uninit_hw(dev_priv); |
| |
| if (DISPLAY_VER(dev_priv) == 14) |
| intel_de_rmw(dev_priv, DC_STATE_EN, 0, |
| HOLD_PHY_PG1_LATCH | HOLD_PHY_CLKREQ_PG1_LATCH); |
| |
| /* |
| * 4. Disable Power Well 1 (PG1). |
| * The AUX IO power wells are toggled on demand, so they are already |
| * disabled at this point. |
| */ |
| mutex_lock(&power_domains->lock); |
| well = lookup_power_well(dev_priv, SKL_DISP_PW_1); |
| intel_power_well_disable(dev_priv, well); |
| mutex_unlock(&power_domains->lock); |
| |
| /* 5. */ |
| intel_combo_phy_uninit(dev_priv); |
| } |
| |
| static void chv_phy_control_init(struct drm_i915_private *dev_priv) |
| { |
| struct i915_power_well *cmn_bc = |
| lookup_power_well(dev_priv, VLV_DISP_PW_DPIO_CMN_BC); |
| struct i915_power_well *cmn_d = |
| lookup_power_well(dev_priv, CHV_DISP_PW_DPIO_CMN_D); |
| |
| /* |
| * DISPLAY_PHY_CONTROL can get corrupted if read. As a |
| * workaround never ever read DISPLAY_PHY_CONTROL, and |
| * instead maintain a shadow copy ourselves. Use the actual |
| * power well state and lane status to reconstruct the |
| * expected initial value. |
| */ |
| dev_priv->display.power.chv_phy_control = |
| PHY_LDO_SEQ_DELAY(PHY_LDO_DELAY_600NS, DPIO_PHY0) | |
| PHY_LDO_SEQ_DELAY(PHY_LDO_DELAY_600NS, DPIO_PHY1) | |
| PHY_CH_POWER_MODE(PHY_CH_DEEP_PSR, DPIO_PHY0, DPIO_CH0) | |
| PHY_CH_POWER_MODE(PHY_CH_DEEP_PSR, DPIO_PHY0, DPIO_CH1) | |
| PHY_CH_POWER_MODE(PHY_CH_DEEP_PSR, DPIO_PHY1, DPIO_CH0); |
| |
| /* |
| * If all lanes are disabled we leave the override disabled |
| * with all power down bits cleared to match the state we |
| * would use after disabling the port. Otherwise enable the |
| * override and set the lane powerdown bits accding to the |
| * current lane status. |
| */ |
| if (intel_power_well_is_enabled(dev_priv, cmn_bc)) { |
| u32 status = intel_de_read(dev_priv, DPLL(dev_priv, PIPE_A)); |
| unsigned int mask; |
| |
| mask = status & DPLL_PORTB_READY_MASK; |
| if (mask == 0xf) |
| mask = 0x0; |
| else |
| dev_priv->display.power.chv_phy_control |= |
| PHY_CH_POWER_DOWN_OVRD_EN(DPIO_PHY0, DPIO_CH0); |
| |
| dev_priv->display.power.chv_phy_control |= |
| PHY_CH_POWER_DOWN_OVRD(mask, DPIO_PHY0, DPIO_CH0); |
| |
| mask = (status & DPLL_PORTC_READY_MASK) >> 4; |
| if (mask == 0xf) |
| mask = 0x0; |
| else |
| dev_priv->display.power.chv_phy_control |= |
| PHY_CH_POWER_DOWN_OVRD_EN(DPIO_PHY0, DPIO_CH1); |
| |
| dev_priv->display.power.chv_phy_control |= |
| PHY_CH_POWER_DOWN_OVRD(mask, DPIO_PHY0, DPIO_CH1); |
| |
| dev_priv->display.power.chv_phy_control |= PHY_COM_LANE_RESET_DEASSERT(DPIO_PHY0); |
| |
| dev_priv->display.power.chv_phy_assert[DPIO_PHY0] = false; |
| } else { |
| dev_priv->display.power.chv_phy_assert[DPIO_PHY0] = true; |
| } |
| |
| if (intel_power_well_is_enabled(dev_priv, cmn_d)) { |
| u32 status = intel_de_read(dev_priv, DPIO_PHY_STATUS); |
| unsigned int mask; |
| |
| mask = status & DPLL_PORTD_READY_MASK; |
| |
| if (mask == 0xf) |
| mask = 0x0; |
| else |
| dev_priv->display.power.chv_phy_control |= |
| PHY_CH_POWER_DOWN_OVRD_EN(DPIO_PHY1, DPIO_CH0); |
| |
| dev_priv->display.power.chv_phy_control |= |
| PHY_CH_POWER_DOWN_OVRD(mask, DPIO_PHY1, DPIO_CH0); |
| |
| dev_priv->display.power.chv_phy_control |= PHY_COM_LANE_RESET_DEASSERT(DPIO_PHY1); |
| |
| dev_priv->display.power.chv_phy_assert[DPIO_PHY1] = false; |
| } else { |
| dev_priv->display.power.chv_phy_assert[DPIO_PHY1] = true; |
| } |
| |
| drm_dbg_kms(&dev_priv->drm, "Initial PHY_CONTROL=0x%08x\n", |
| dev_priv->display.power.chv_phy_control); |
| |
| /* Defer application of initial phy_control to enabling the powerwell */ |
| } |
| |
| static void vlv_cmnlane_wa(struct drm_i915_private *dev_priv) |
| { |
| struct i915_power_well *cmn = |
| lookup_power_well(dev_priv, VLV_DISP_PW_DPIO_CMN_BC); |
| struct i915_power_well *disp2d = |
| lookup_power_well(dev_priv, VLV_DISP_PW_DISP2D); |
| |
| /* If the display might be already active skip this */ |
| if (intel_power_well_is_enabled(dev_priv, cmn) && |
| intel_power_well_is_enabled(dev_priv, disp2d) && |
| intel_de_read(dev_priv, DPIO_CTL) & DPIO_CMNRST) |
| return; |
| |
| drm_dbg_kms(&dev_priv->drm, "toggling display PHY side reset\n"); |
| |
| /* cmnlane needs DPLL registers */ |
| intel_power_well_enable(dev_priv, disp2d); |
| |
| /* |
| * From VLV2A0_DP_eDP_HDMI_DPIO_driver_vbios_notes_11.docx: |
| * Need to assert and de-assert PHY SB reset by gating the |
| * common lane power, then un-gating it. |
| * Simply ungating isn't enough to reset the PHY enough to get |
| * ports and lanes running. |
| */ |
| intel_power_well_disable(dev_priv, cmn); |
| } |
| |
| static bool vlv_punit_is_power_gated(struct drm_i915_private *dev_priv, u32 reg0) |
| { |
| bool ret; |
| |
| vlv_punit_get(dev_priv); |
| ret = (vlv_punit_read(dev_priv, reg0) & SSPM0_SSC_MASK) == SSPM0_SSC_PWR_GATE; |
| vlv_punit_put(dev_priv); |
| |
| return ret; |
| } |
| |
| static void assert_ved_power_gated(struct drm_i915_private *dev_priv) |
| { |
| drm_WARN(&dev_priv->drm, |
| !vlv_punit_is_power_gated(dev_priv, PUNIT_REG_VEDSSPM0), |
| "VED not power gated\n"); |
| } |
| |
| static void assert_isp_power_gated(struct drm_i915_private *dev_priv) |
| { |
| static const struct pci_device_id isp_ids[] = { |
| {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x0f38)}, |
| {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x22b8)}, |
| {} |
| }; |
| |
| drm_WARN(&dev_priv->drm, !pci_dev_present(isp_ids) && |
| !vlv_punit_is_power_gated(dev_priv, PUNIT_REG_ISPSSPM0), |
| "ISP not power gated\n"); |
| } |
| |
| static void intel_power_domains_verify_state(struct drm_i915_private *dev_priv); |
| |
| /** |
| * intel_power_domains_init_hw - initialize hardware power domain state |
| * @i915: i915 device instance |
| * @resume: Called from resume code paths or not |
| * |
| * This function initializes the hardware power domain state and enables all |
| * power wells belonging to the INIT power domain. Power wells in other |
| * domains (and not in the INIT domain) are referenced or disabled by |
| * intel_modeset_readout_hw_state(). After that the reference count of each |
| * power well must match its HW enabled state, see |
| * intel_power_domains_verify_state(). |
| * |
| * It will return with power domains disabled (to be enabled later by |
| * intel_power_domains_enable()) and must be paired with |
| * intel_power_domains_driver_remove(). |
| */ |
| void intel_power_domains_init_hw(struct drm_i915_private *i915, bool resume) |
| { |
| struct i915_power_domains *power_domains = &i915->display.power.domains; |
| |
| power_domains->initializing = true; |
| |
| if (DISPLAY_VER(i915) >= 11) { |
| icl_display_core_init(i915, resume); |
| } else if (IS_GEMINILAKE(i915) || IS_BROXTON(i915)) { |
| bxt_display_core_init(i915, resume); |
| } else if (DISPLAY_VER(i915) == 9) { |
| skl_display_core_init(i915, resume); |
| } else if (IS_CHERRYVIEW(i915)) { |
| mutex_lock(&power_domains->lock); |
| chv_phy_control_init(i915); |
| mutex_unlock(&power_domains->lock); |
| assert_isp_power_gated(i915); |
| } else if (IS_VALLEYVIEW(i915)) { |
| mutex_lock(&power_domains->lock); |
| vlv_cmnlane_wa(i915); |
| mutex_unlock(&power_domains->lock); |
| assert_ved_power_gated(i915); |
| assert_isp_power_gated(i915); |
| } else if (IS_BROADWELL(i915) || IS_HASWELL(i915)) { |
| hsw_assert_cdclk(i915); |
| intel_pch_reset_handshake(i915, !HAS_PCH_NOP(i915)); |
| } else if (IS_IVYBRIDGE(i915)) { |
| intel_pch_reset_handshake(i915, !HAS_PCH_NOP(i915)); |
| } |
| |
| /* |
| * Keep all power wells enabled for any dependent HW access during |
| * initialization and to make sure we keep BIOS enabled display HW |
| * resources powered until display HW readout is complete. We drop |
| * this reference in intel_power_domains_enable(). |
| */ |
| drm_WARN_ON(&i915->drm, power_domains->init_wakeref); |
| power_domains->init_wakeref = |
| intel_display_power_get(i915, POWER_DOMAIN_INIT); |
| |
| /* Disable power support if the user asked so. */ |
| if (!i915->display.params.disable_power_well) { |
| drm_WARN_ON(&i915->drm, power_domains->disable_wakeref); |
| i915->display.power.domains.disable_wakeref = intel_display_power_get(i915, |
| POWER_DOMAIN_INIT); |
| } |
| intel_power_domains_sync_hw(i915); |
| |
| power_domains->initializing = false; |
| } |
| |
| /** |
| * intel_power_domains_driver_remove - deinitialize hw power domain state |
| * @i915: i915 device instance |
| * |
| * De-initializes the display power domain HW state. It also ensures that the |
| * device stays powered up so that the driver can be reloaded. |
| * |
| * It must be called with power domains already disabled (after a call to |
| * intel_power_domains_disable()) and must be paired with |
| * intel_power_domains_init_hw(). |
| */ |
| void intel_power_domains_driver_remove(struct drm_i915_private *i915) |
| { |
| intel_wakeref_t wakeref __maybe_unused = |
| fetch_and_zero(&i915->display.power.domains.init_wakeref); |
| |
| /* Remove the refcount we took to keep power well support disabled. */ |
| if (!i915->display.params.disable_power_well) |
| intel_display_power_put(i915, POWER_DOMAIN_INIT, |
| fetch_and_zero(&i915->display.power.domains.disable_wakeref)); |
| |
| intel_display_power_flush_work_sync(i915); |
| |
| intel_power_domains_verify_state(i915); |
| |
| /* Keep the power well enabled, but cancel its rpm wakeref. */ |
| intel_runtime_pm_put(&i915->runtime_pm, wakeref); |
| } |
| |
| /** |
| * intel_power_domains_sanitize_state - sanitize power domains state |
| * @i915: i915 device instance |
| * |
| * Sanitize the power domains state during driver loading and system resume. |
| * The function will disable all display power wells that BIOS has enabled |
| * without a user for it (any user for a power well has taken a reference |
| * on it by the time this function is called, after the state of all the |
| * pipe, encoder, etc. HW resources have been sanitized). |
| */ |
| void intel_power_domains_sanitize_state(struct drm_i915_private *i915) |
| { |
| struct i915_power_domains *power_domains = &i915->display.power.domains; |
| struct i915_power_well *power_well; |
| |
| mutex_lock(&power_domains->lock); |
| |
| for_each_power_well_reverse(i915, power_well) { |
| if (power_well->desc->always_on || power_well->count || |
| !intel_power_well_is_enabled(i915, power_well)) |
| continue; |
| |
| drm_dbg_kms(&i915->drm, |
| "BIOS left unused %s power well enabled, disabling it\n", |
| intel_power_well_name(power_well)); |
| intel_power_well_disable(i915, power_well); |
| } |
| |
| mutex_unlock(&power_domains->lock); |
| } |
| |
| /** |
| * intel_power_domains_enable - enable toggling of display power wells |
| * @i915: i915 device instance |
| * |
| * Enable the ondemand enabling/disabling of the display power wells. Note that |
| * power wells not belonging to POWER_DOMAIN_INIT are allowed to be toggled |
| * only at specific points of the display modeset sequence, thus they are not |
| * affected by the intel_power_domains_enable()/disable() calls. The purpose |
| * of these function is to keep the rest of power wells enabled until the end |
| * of display HW readout (which will acquire the power references reflecting |
| * the current HW state). |
| */ |
| void intel_power_domains_enable(struct drm_i915_private *i915) |
| { |
| intel_wakeref_t wakeref __maybe_unused = |
| fetch_and_zero(&i915->display.power.domains.init_wakeref); |
| |
| intel_display_power_put(i915, POWER_DOMAIN_INIT, wakeref); |
| intel_power_domains_verify_state(i915); |
| } |
| |
| /** |
| * intel_power_domains_disable - disable toggling of display power wells |
| * @i915: i915 device instance |
| * |
| * Disable the ondemand enabling/disabling of the display power wells. See |
| * intel_power_domains_enable() for which power wells this call controls. |
| */ |
| void intel_power_domains_disable(struct drm_i915_private *i915) |
| { |
| struct i915_power_domains *power_domains = &i915->display.power.domains; |
| |
| drm_WARN_ON(&i915->drm, power_domains->init_wakeref); |
| power_domains->init_wakeref = |
| intel_display_power_get(i915, POWER_DOMAIN_INIT); |
| |
| intel_power_domains_verify_state(i915); |
| } |
| |
| /** |
| * intel_power_domains_suspend - suspend power domain state |
| * @i915: i915 device instance |
| * @s2idle: specifies whether we go to idle, or deeper sleep |
| * |
| * This function prepares the hardware power domain state before entering |
| * system suspend. |
| * |
| * It must be called with power domains already disabled (after a call to |
| * intel_power_domains_disable()) and paired with intel_power_domains_resume(). |
| */ |
| void intel_power_domains_suspend(struct drm_i915_private *i915, bool s2idle) |
| { |
| struct i915_power_domains *power_domains = &i915->display.power.domains; |
| intel_wakeref_t wakeref __maybe_unused = |
| fetch_and_zero(&power_domains->init_wakeref); |
| |
| intel_display_power_put(i915, POWER_DOMAIN_INIT, wakeref); |
| |
| /* |
| * In case of suspend-to-idle (aka S0ix) on a DMC platform without DC9 |
| * support don't manually deinit the power domains. This also means the |
| * DMC firmware will stay active, it will power down any HW |
| * resources as required and also enable deeper system power states |
| * that would be blocked if the firmware was inactive. |
| */ |
| if (!(power_domains->allowed_dc_mask & DC_STATE_EN_DC9) && s2idle && |
| intel_dmc_has_payload(i915)) { |
| intel_display_power_flush_work(i915); |
| intel_power_domains_verify_state(i915); |
| return; |
| } |
| |
| /* |
| * Even if power well support was disabled we still want to disable |
| * power wells if power domains must be deinitialized for suspend. |
| */ |
| if (!i915->display.params.disable_power_well) |
| intel_display_power_put(i915, POWER_DOMAIN_INIT, |
| fetch_and_zero(&i915->display.power.domains.disable_wakeref)); |
| |
| intel_display_power_flush_work(i915); |
| intel_power_domains_verify_state(i915); |
| |
| if (DISPLAY_VER(i915) >= 11) |
| icl_display_core_uninit(i915); |
| else if (IS_GEMINILAKE(i915) || IS_BROXTON(i915)) |
| bxt_display_core_uninit(i915); |
| else if (DISPLAY_VER(i915) == 9) |
| skl_display_core_uninit(i915); |
| |
| power_domains->display_core_suspended = true; |
| } |
| |
| /** |
| * intel_power_domains_resume - resume power domain state |
| * @i915: i915 device instance |
| * |
| * This function resume the hardware power domain state during system resume. |
| * |
| * It will return with power domain support disabled (to be enabled later by |
| * intel_power_domains_enable()) and must be paired with |
| * intel_power_domains_suspend(). |
| */ |
| void intel_power_domains_resume(struct drm_i915_private *i915) |
| { |
| struct i915_power_domains *power_domains = &i915->display.power.domains; |
| |
| if (power_domains->display_core_suspended) { |
| intel_power_domains_init_hw(i915, true); |
| power_domains->display_core_suspended = false; |
| } else { |
| drm_WARN_ON(&i915->drm, power_domains->init_wakeref); |
| power_domains->init_wakeref = |
| intel_display_power_get(i915, POWER_DOMAIN_INIT); |
| } |
| |
| intel_power_domains_verify_state(i915); |
| } |
| |
| #if IS_ENABLED(CONFIG_DRM_I915_DEBUG_RUNTIME_PM) |
| |
| static void intel_power_domains_dump_info(struct drm_i915_private *i915) |
| { |
| struct i915_power_domains *power_domains = &i915->display.power.domains; |
| struct i915_power_well *power_well; |
| |
| for_each_power_well(i915, power_well) { |
| enum intel_display_power_domain domain; |
| |
| drm_dbg(&i915->drm, "%-25s %d\n", |
| intel_power_well_name(power_well), intel_power_well_refcount(power_well)); |
| |
| for_each_power_domain(domain, intel_power_well_domains(power_well)) |
| drm_dbg(&i915->drm, " %-23s %d\n", |
| intel_display_power_domain_str(domain), |
| power_domains->domain_use_count[domain]); |
| } |
| } |
| |
| /** |
| * intel_power_domains_verify_state - verify the HW/SW state for all power wells |
| * @i915: i915 device instance |
| * |
| * Verify if the reference count of each power well matches its HW enabled |
| * state and the total refcount of the domains it belongs to. This must be |
| * called after modeset HW state sanitization, which is responsible for |
| * acquiring reference counts for any power wells in use and disabling the |
| * ones left on by BIOS but not required by any active output. |
| */ |
| static void intel_power_domains_verify_state(struct drm_i915_private *i915) |
| { |
| struct i915_power_domains *power_domains = &i915->display.power.domains; |
| struct i915_power_well *power_well; |
| bool dump_domain_info; |
| |
| mutex_lock(&power_domains->lock); |
| |
| verify_async_put_domains_state(power_domains); |
| |
| dump_domain_info = false; |
| for_each_power_well(i915, power_well) { |
| enum intel_display_power_domain domain; |
| int domains_count; |
| bool enabled; |
| |
| enabled = intel_power_well_is_enabled(i915, power_well); |
| if ((intel_power_well_refcount(power_well) || |
| intel_power_well_is_always_on(power_well)) != |
| enabled) |
| drm_err(&i915->drm, |
| "power well %s state mismatch (refcount %d/enabled %d)", |
| intel_power_well_name(power_well), |
| intel_power_well_refcount(power_well), enabled); |
| |
| domains_count = 0; |
| for_each_power_domain(domain, intel_power_well_domains(power_well)) |
| domains_count += power_domains->domain_use_count[domain]; |
| |
| if (intel_power_well_refcount(power_well) != domains_count) { |
| drm_err(&i915->drm, |
| "power well %s refcount/domain refcount mismatch " |
| "(refcount %d/domains refcount %d)\n", |
| intel_power_well_name(power_well), |
| intel_power_well_refcount(power_well), |
| domains_count); |
| dump_domain_info = true; |
| } |
| } |
| |
| if (dump_domain_info) { |
| static bool dumped; |
| |
| if (!dumped) { |
| intel_power_domains_dump_info(i915); |
| dumped = true; |
| } |
| } |
| |
| mutex_unlock(&power_domains->lock); |
| } |
| |
| #else |
| |
| static void intel_power_domains_verify_state(struct drm_i915_private *i915) |
| { |
| } |
| |
| #endif |
| |
| void intel_display_power_suspend_late(struct drm_i915_private *i915) |
| { |
| if (DISPLAY_VER(i915) >= 11 || IS_GEMINILAKE(i915) || |
| IS_BROXTON(i915)) { |
| bxt_enable_dc9(i915); |
| } else if (IS_HASWELL(i915) || IS_BROADWELL(i915)) { |
| hsw_enable_pc8(i915); |
| } |
| |
| /* Tweaked Wa_14010685332:cnp,icp,jsp,mcc,tgp,adp */ |
| if (INTEL_PCH_TYPE(i915) >= PCH_CNP && INTEL_PCH_TYPE(i915) < PCH_DG1) |
| intel_de_rmw(i915, SOUTH_CHICKEN1, SBCLK_RUN_REFCLK_DIS, SBCLK_RUN_REFCLK_DIS); |
| } |
| |
| void intel_display_power_resume_early(struct drm_i915_private *i915) |
| { |
| if (DISPLAY_VER(i915) >= 11 || IS_GEMINILAKE(i915) || |
| IS_BROXTON(i915)) { |
| gen9_sanitize_dc_state(i915); |
| bxt_disable_dc9(i915); |
| } else if (IS_HASWELL(i915) || IS_BROADWELL(i915)) { |
| hsw_disable_pc8(i915); |
| } |
| |
| /* Tweaked Wa_14010685332:cnp,icp,jsp,mcc,tgp,adp */ |
| if (INTEL_PCH_TYPE(i915) >= PCH_CNP && INTEL_PCH_TYPE(i915) < PCH_DG1) |
| intel_de_rmw(i915, SOUTH_CHICKEN1, SBCLK_RUN_REFCLK_DIS, 0); |
| } |
| |
| void intel_display_power_suspend(struct drm_i915_private *i915) |
| { |
| if (DISPLAY_VER(i915) >= 11) { |
| icl_display_core_uninit(i915); |
| bxt_enable_dc9(i915); |
| } else if (IS_GEMINILAKE(i915) || IS_BROXTON(i915)) { |
| bxt_display_core_uninit(i915); |
| bxt_enable_dc9(i915); |
| } else if (IS_HASWELL(i915) || IS_BROADWELL(i915)) { |
| hsw_enable_pc8(i915); |
| } |
| } |
| |
| void intel_display_power_resume(struct drm_i915_private *i915) |
| { |
| struct i915_power_domains *power_domains = &i915->display.power.domains; |
| |
| if (DISPLAY_VER(i915) >= 11) { |
| bxt_disable_dc9(i915); |
| icl_display_core_init(i915, true); |
| if (intel_dmc_has_payload(i915)) { |
| if (power_domains->allowed_dc_mask & DC_STATE_EN_UPTO_DC6) |
| skl_enable_dc6(i915); |
| else if (power_domains->allowed_dc_mask & DC_STATE_EN_UPTO_DC5) |
| gen9_enable_dc5(i915); |
| } |
| } else if (IS_GEMINILAKE(i915) || IS_BROXTON(i915)) { |
| bxt_disable_dc9(i915); |
| bxt_display_core_init(i915, true); |
| if (intel_dmc_has_payload(i915) && |
| (power_domains->allowed_dc_mask & DC_STATE_EN_UPTO_DC5)) |
| gen9_enable_dc5(i915); |
| } else if (IS_HASWELL(i915) || IS_BROADWELL(i915)) { |
| hsw_disable_pc8(i915); |
| } |
| } |
| |
| void intel_display_power_debug(struct drm_i915_private *i915, struct seq_file *m) |
| { |
| struct i915_power_domains *power_domains = &i915->display.power.domains; |
| int i; |
| |
| mutex_lock(&power_domains->lock); |
| |
| seq_printf(m, "%-25s %s\n", "Power well/domain", "Use count"); |
| for (i = 0; i < power_domains->power_well_count; i++) { |
| struct i915_power_well *power_well; |
| enum intel_display_power_domain power_domain; |
| |
| power_well = &power_domains->power_wells[i]; |
| seq_printf(m, "%-25s %d\n", intel_power_well_name(power_well), |
| intel_power_well_refcount(power_well)); |
| |
| for_each_power_domain(power_domain, intel_power_well_domains(power_well)) |
| seq_printf(m, " %-23s %d\n", |
| intel_display_power_domain_str(power_domain), |
| power_domains->domain_use_count[power_domain]); |
| } |
| |
| mutex_unlock(&power_domains->lock); |
| } |
| |
| struct intel_ddi_port_domains { |
| enum port port_start; |
| enum port port_end; |
| enum aux_ch aux_ch_start; |
| enum aux_ch aux_ch_end; |
| |
| enum intel_display_power_domain ddi_lanes; |
| enum intel_display_power_domain ddi_io; |
| enum intel_display_power_domain aux_io; |
| enum intel_display_power_domain aux_legacy_usbc; |
| enum intel_display_power_domain aux_tbt; |
| }; |
| |
| static const struct intel_ddi_port_domains |
| i9xx_port_domains[] = { |
| { |
| .port_start = PORT_A, |
| .port_end = PORT_F, |
| .aux_ch_start = AUX_CH_A, |
| .aux_ch_end = AUX_CH_F, |
| |
| .ddi_lanes = POWER_DOMAIN_PORT_DDI_LANES_A, |
| .ddi_io = POWER_DOMAIN_PORT_DDI_IO_A, |
| .aux_io = POWER_DOMAIN_AUX_IO_A, |
| .aux_legacy_usbc = POWER_DOMAIN_AUX_A, |
| .aux_tbt = POWER_DOMAIN_INVALID, |
| }, |
| }; |
| |
| static const struct intel_ddi_port_domains |
| d11_port_domains[] = { |
| { |
| .port_start = PORT_A, |
| .port_end = PORT_B, |
| .aux_ch_start = AUX_CH_A, |
| .aux_ch_end = AUX_CH_B, |
| |
| .ddi_lanes = POWER_DOMAIN_PORT_DDI_LANES_A, |
| .ddi_io = POWER_DOMAIN_PORT_DDI_IO_A, |
| .aux_io = POWER_DOMAIN_AUX_IO_A, |
| .aux_legacy_usbc = POWER_DOMAIN_AUX_A, |
| .aux_tbt = POWER_DOMAIN_INVALID, |
| }, { |
| .port_start = PORT_C, |
| .port_end = PORT_F, |
| .aux_ch_start = AUX_CH_C, |
| .aux_ch_end = AUX_CH_F, |
| |
| .ddi_lanes = POWER_DOMAIN_PORT_DDI_LANES_C, |
| .ddi_io = POWER_DOMAIN_PORT_DDI_IO_C, |
| .aux_io = POWER_DOMAIN_AUX_IO_C, |
| .aux_legacy_usbc = POWER_DOMAIN_AUX_C, |
| .aux_tbt = POWER_DOMAIN_AUX_TBT1, |
| }, |
| }; |
| |
| static const struct intel_ddi_port_domains |
| d12_port_domains[] = { |
| { |
| .port_start = PORT_A, |
| .port_end = PORT_C, |
| .aux_ch_start = AUX_CH_A, |
| .aux_ch_end = AUX_CH_C, |
| |
| .ddi_lanes = POWER_DOMAIN_PORT_DDI_LANES_A, |
| .ddi_io = POWER_DOMAIN_PORT_DDI_IO_A, |
| .aux_io = POWER_DOMAIN_AUX_IO_A, |
| .aux_legacy_usbc = POWER_DOMAIN_AUX_A, |
| .aux_tbt = POWER_DOMAIN_INVALID, |
| }, { |
| .port_start = PORT_TC1, |
| .port_end = PORT_TC6, |
| .aux_ch_start = AUX_CH_USBC1, |
| .aux_ch_end = AUX_CH_USBC6, |
| |
| .ddi_lanes = POWER_DOMAIN_PORT_DDI_LANES_TC1, |
| .ddi_io = POWER_DOMAIN_PORT_DDI_IO_TC1, |
| .aux_io = POWER_DOMAIN_INVALID, |
| .aux_legacy_usbc = POWER_DOMAIN_AUX_USBC1, |
| .aux_tbt = POWER_DOMAIN_AUX_TBT1, |
| }, |
| }; |
| |
| static const struct intel_ddi_port_domains |
| d13_port_domains[] = { |
| { |
| .port_start = PORT_A, |
| .port_end = PORT_C, |
| .aux_ch_start = AUX_CH_A, |
| .aux_ch_end = AUX_CH_C, |
| |
| .ddi_lanes = POWER_DOMAIN_PORT_DDI_LANES_A, |
| .ddi_io = POWER_DOMAIN_PORT_DDI_IO_A, |
| .aux_io = POWER_DOMAIN_AUX_IO_A, |
| .aux_legacy_usbc = POWER_DOMAIN_AUX_A, |
| .aux_tbt = POWER_DOMAIN_INVALID, |
| }, { |
| .port_start = PORT_TC1, |
| .port_end = PORT_TC4, |
| .aux_ch_start = AUX_CH_USBC1, |
| .aux_ch_end = AUX_CH_USBC4, |
| |
| .ddi_lanes = POWER_DOMAIN_PORT_DDI_LANES_TC1, |
| .ddi_io = POWER_DOMAIN_PORT_DDI_IO_TC1, |
| .aux_io = POWER_DOMAIN_INVALID, |
| .aux_legacy_usbc = POWER_DOMAIN_AUX_USBC1, |
| .aux_tbt = POWER_DOMAIN_AUX_TBT1, |
| }, { |
| .port_start = PORT_D_XELPD, |
| .port_end = PORT_E_XELPD, |
| .aux_ch_start = AUX_CH_D_XELPD, |
| .aux_ch_end = AUX_CH_E_XELPD, |
| |
| .ddi_lanes = POWER_DOMAIN_PORT_DDI_LANES_D, |
| .ddi_io = POWER_DOMAIN_PORT_DDI_IO_D, |
| .aux_io = POWER_DOMAIN_AUX_IO_D, |
| .aux_legacy_usbc = POWER_DOMAIN_AUX_D, |
| .aux_tbt = POWER_DOMAIN_INVALID, |
| }, |
| }; |
| |
| static void |
| intel_port_domains_for_platform(struct drm_i915_private *i915, |
| const struct intel_ddi_port_domains **domains, |
| int *domains_size) |
| { |
| if (DISPLAY_VER(i915) >= 13) { |
| *domains = d13_port_domains; |
| *domains_size = ARRAY_SIZE(d13_port_domains); |
| } else if (DISPLAY_VER(i915) >= 12) { |
| *domains = d12_port_domains; |
| *domains_size = ARRAY_SIZE(d12_port_domains); |
| } else if (DISPLAY_VER(i915) >= 11) { |
| *domains = d11_port_domains; |
| *domains_size = ARRAY_SIZE(d11_port_domains); |
| } else { |
| *domains = i9xx_port_domains; |
| *domains_size = ARRAY_SIZE(i9xx_port_domains); |
| } |
| } |
| |
| static const struct intel_ddi_port_domains * |
| intel_port_domains_for_port(struct drm_i915_private *i915, enum port port) |
| { |
| const struct intel_ddi_port_domains *domains; |
| int domains_size; |
| int i; |
| |
| intel_port_domains_for_platform(i915, &domains, &domains_size); |
| for (i = 0; i < domains_size; i++) |
| if (port >= domains[i].port_start && port <= domains[i].port_end) |
| return &domains[i]; |
| |
| return NULL; |
| } |
| |
| enum intel_display_power_domain |
| intel_display_power_ddi_io_domain(struct drm_i915_private *i915, enum port port) |
| { |
| const struct intel_ddi_port_domains *domains = intel_port_domains_for_port(i915, port); |
| |
| if (drm_WARN_ON(&i915->drm, !domains || domains->ddi_io == POWER_DOMAIN_INVALID)) |
| return POWER_DOMAIN_PORT_DDI_IO_A; |
| |
| return domains->ddi_io + (int)(port - domains->port_start); |
| } |
| |
| enum intel_display_power_domain |
| intel_display_power_ddi_lanes_domain(struct drm_i915_private *i915, enum port port) |
| { |
| const struct intel_ddi_port_domains *domains = intel_port_domains_for_port(i915, port); |
| |
| if (drm_WARN_ON(&i915->drm, !domains || domains->ddi_lanes == POWER_DOMAIN_INVALID)) |
| return POWER_DOMAIN_PORT_DDI_LANES_A; |
| |
| return domains->ddi_lanes + (int)(port - domains->port_start); |
| } |
| |
| static const struct intel_ddi_port_domains * |
| intel_port_domains_for_aux_ch(struct drm_i915_private *i915, enum aux_ch aux_ch) |
| { |
| const struct intel_ddi_port_domains *domains; |
| int domains_size; |
| int i; |
| |
| intel_port_domains_for_platform(i915, &domains, &domains_size); |
| for (i = 0; i < domains_size; i++) |
| if (aux_ch >= domains[i].aux_ch_start && aux_ch <= domains[i].aux_ch_end) |
| return &domains[i]; |
| |
| return NULL; |
| } |
| |
| enum intel_display_power_domain |
| intel_display_power_aux_io_domain(struct drm_i915_private *i915, enum aux_ch aux_ch) |
| { |
| const struct intel_ddi_port_domains *domains = intel_port_domains_for_aux_ch(i915, aux_ch); |
| |
| if (drm_WARN_ON(&i915->drm, !domains || domains->aux_io == POWER_DOMAIN_INVALID)) |
| return POWER_DOMAIN_AUX_IO_A; |
| |
| return domains->aux_io + (int)(aux_ch - domains->aux_ch_start); |
| } |
| |
| enum intel_display_power_domain |
| intel_display_power_legacy_aux_domain(struct drm_i915_private *i915, enum aux_ch aux_ch) |
| { |
| const struct intel_ddi_port_domains *domains = intel_port_domains_for_aux_ch(i915, aux_ch); |
| |
| if (drm_WARN_ON(&i915->drm, !domains || domains->aux_legacy_usbc == POWER_DOMAIN_INVALID)) |
| return POWER_DOMAIN_AUX_A; |
| |
| return domains->aux_legacy_usbc + (int)(aux_ch - domains->aux_ch_start); |
| } |
| |
| enum intel_display_power_domain |
| intel_display_power_tbt_aux_domain(struct drm_i915_private *i915, enum aux_ch aux_ch) |
| { |
| const struct intel_ddi_port_domains *domains = intel_port_domains_for_aux_ch(i915, aux_ch); |
| |
| if (drm_WARN_ON(&i915->drm, !domains || domains->aux_tbt == POWER_DOMAIN_INVALID)) |
| return POWER_DOMAIN_AUX_TBT1; |
| |
| return domains->aux_tbt + (int)(aux_ch - domains->aux_ch_start); |
| } |