| /* |
| * Copyright © 2008-2015 Intel Corporation |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice (including the next |
| * paragraph) shall be included in all copies or substantial portions of the |
| * Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS |
| * IN THE SOFTWARE. |
| */ |
| |
| #include <drm/display/drm_dp_helper.h> |
| |
| #include "i915_drv.h" |
| #include "intel_display_types.h" |
| #include "intel_dp.h" |
| #include "intel_dp_link_training.h" |
| #include "intel_encoder.h" |
| #include "intel_hotplug.h" |
| #include "intel_panel.h" |
| |
| #define LT_MSG_PREFIX "[CONNECTOR:%d:%s][ENCODER:%d:%s][%s] " |
| #define LT_MSG_ARGS(_intel_dp, _dp_phy) (_intel_dp)->attached_connector->base.base.id, \ |
| (_intel_dp)->attached_connector->base.name, \ |
| dp_to_dig_port(_intel_dp)->base.base.base.id, \ |
| dp_to_dig_port(_intel_dp)->base.base.name, \ |
| drm_dp_phy_name(_dp_phy) |
| |
| #define lt_dbg(_intel_dp, _dp_phy, _format, ...) \ |
| drm_dbg_kms(to_intel_display(_intel_dp)->drm, \ |
| LT_MSG_PREFIX _format, \ |
| LT_MSG_ARGS(_intel_dp, _dp_phy), ## __VA_ARGS__) |
| |
| #define lt_err(_intel_dp, _dp_phy, _format, ...) do { \ |
| if (intel_digital_port_connected(&dp_to_dig_port(_intel_dp)->base)) \ |
| drm_err(to_intel_display(_intel_dp)->drm, \ |
| LT_MSG_PREFIX _format, \ |
| LT_MSG_ARGS(_intel_dp, _dp_phy), ## __VA_ARGS__); \ |
| else \ |
| lt_dbg(_intel_dp, _dp_phy, "Sink disconnected: " _format, ## __VA_ARGS__); \ |
| } while (0) |
| |
| static void intel_dp_reset_lttpr_common_caps(struct intel_dp *intel_dp) |
| { |
| memset(intel_dp->lttpr_common_caps, 0, sizeof(intel_dp->lttpr_common_caps)); |
| } |
| |
| static void intel_dp_reset_lttpr_count(struct intel_dp *intel_dp) |
| { |
| intel_dp->lttpr_common_caps[DP_PHY_REPEATER_CNT - |
| DP_LT_TUNABLE_PHY_REPEATER_FIELD_DATA_STRUCTURE_REV] = 0; |
| } |
| |
| static u8 *intel_dp_lttpr_phy_caps(struct intel_dp *intel_dp, |
| enum drm_dp_phy dp_phy) |
| { |
| return intel_dp->lttpr_phy_caps[dp_phy - DP_PHY_LTTPR1]; |
| } |
| |
| static void intel_dp_read_lttpr_phy_caps(struct intel_dp *intel_dp, |
| const u8 dpcd[DP_RECEIVER_CAP_SIZE], |
| enum drm_dp_phy dp_phy) |
| { |
| u8 *phy_caps = intel_dp_lttpr_phy_caps(intel_dp, dp_phy); |
| |
| if (drm_dp_read_lttpr_phy_caps(&intel_dp->aux, dpcd, dp_phy, phy_caps) < 0) { |
| lt_dbg(intel_dp, dp_phy, "failed to read the PHY caps\n"); |
| return; |
| } |
| |
| lt_dbg(intel_dp, dp_phy, "PHY capabilities: %*ph\n", |
| (int)sizeof(intel_dp->lttpr_phy_caps[0]), |
| phy_caps); |
| } |
| |
| static bool intel_dp_read_lttpr_common_caps(struct intel_dp *intel_dp, |
| const u8 dpcd[DP_RECEIVER_CAP_SIZE]) |
| { |
| int ret; |
| |
| ret = drm_dp_read_lttpr_common_caps(&intel_dp->aux, dpcd, |
| intel_dp->lttpr_common_caps); |
| if (ret < 0) |
| goto reset_caps; |
| |
| lt_dbg(intel_dp, DP_PHY_DPRX, "LTTPR common capabilities: %*ph\n", |
| (int)sizeof(intel_dp->lttpr_common_caps), |
| intel_dp->lttpr_common_caps); |
| |
| /* The minimum value of LT_TUNABLE_PHY_REPEATER_FIELD_DATA_STRUCTURE_REV is 1.4 */ |
| if (intel_dp->lttpr_common_caps[0] < 0x14) |
| goto reset_caps; |
| |
| return true; |
| |
| reset_caps: |
| intel_dp_reset_lttpr_common_caps(intel_dp); |
| return false; |
| } |
| |
| static bool |
| intel_dp_set_lttpr_transparent_mode(struct intel_dp *intel_dp, bool enable) |
| { |
| u8 val = enable ? DP_PHY_REPEATER_MODE_TRANSPARENT : |
| DP_PHY_REPEATER_MODE_NON_TRANSPARENT; |
| |
| if (drm_dp_dpcd_write(&intel_dp->aux, DP_PHY_REPEATER_MODE, &val, 1) != 1) |
| return false; |
| |
| intel_dp->lttpr_common_caps[DP_PHY_REPEATER_MODE - |
| DP_LT_TUNABLE_PHY_REPEATER_FIELD_DATA_STRUCTURE_REV] = val; |
| |
| return true; |
| } |
| |
| static bool intel_dp_lttpr_transparent_mode_enabled(struct intel_dp *intel_dp) |
| { |
| return intel_dp->lttpr_common_caps[DP_PHY_REPEATER_MODE - |
| DP_LT_TUNABLE_PHY_REPEATER_FIELD_DATA_STRUCTURE_REV] == |
| DP_PHY_REPEATER_MODE_TRANSPARENT; |
| } |
| |
| /* |
| * Read the LTTPR common capabilities and switch the LTTPR PHYs to |
| * non-transparent mode if this is supported. Preserve the |
| * transparent/non-transparent mode on an active link. |
| * |
| * Return the number of detected LTTPRs in non-transparent mode or 0 if the |
| * LTTPRs are in transparent mode or the detection failed. |
| */ |
| static int intel_dp_init_lttpr_phys(struct intel_dp *intel_dp, const u8 dpcd[DP_RECEIVER_CAP_SIZE]) |
| { |
| int lttpr_count; |
| |
| if (!intel_dp_read_lttpr_common_caps(intel_dp, dpcd)) |
| return 0; |
| |
| lttpr_count = drm_dp_lttpr_count(intel_dp->lttpr_common_caps); |
| /* |
| * Prevent setting LTTPR transparent mode explicitly if no LTTPRs are |
| * detected as this breaks link training at least on the Dell WD19TB |
| * dock. |
| */ |
| if (lttpr_count == 0) |
| return 0; |
| |
| /* |
| * Don't change the mode on an active link, to prevent a loss of link |
| * synchronization. See DP Standard v2.0 3.6.7. about the LTTPR |
| * resetting its internal state when the mode is changed from |
| * non-transparent to transparent. |
| */ |
| if (intel_dp->link_trained) { |
| if (lttpr_count < 0 || intel_dp_lttpr_transparent_mode_enabled(intel_dp)) |
| goto out_reset_lttpr_count; |
| |
| return lttpr_count; |
| } |
| |
| /* |
| * See DP Standard v2.0 3.6.6.1. about the explicit disabling of |
| * non-transparent mode and the disable->enable non-transparent mode |
| * sequence. |
| */ |
| intel_dp_set_lttpr_transparent_mode(intel_dp, true); |
| |
| /* |
| * In case of unsupported number of LTTPRs or failing to switch to |
| * non-transparent mode fall-back to transparent link training mode, |
| * still taking into account any LTTPR common lane- rate/count limits. |
| */ |
| if (lttpr_count < 0) |
| goto out_reset_lttpr_count; |
| |
| if (!intel_dp_set_lttpr_transparent_mode(intel_dp, false)) { |
| lt_dbg(intel_dp, DP_PHY_DPRX, |
| "Switching to LTTPR non-transparent LT mode failed, fall-back to transparent mode\n"); |
| |
| intel_dp_set_lttpr_transparent_mode(intel_dp, true); |
| |
| goto out_reset_lttpr_count; |
| } |
| |
| return lttpr_count; |
| |
| out_reset_lttpr_count: |
| intel_dp_reset_lttpr_count(intel_dp); |
| |
| return 0; |
| } |
| |
| static int intel_dp_init_lttpr(struct intel_dp *intel_dp, const u8 dpcd[DP_RECEIVER_CAP_SIZE]) |
| { |
| int lttpr_count; |
| int i; |
| |
| lttpr_count = intel_dp_init_lttpr_phys(intel_dp, dpcd); |
| |
| for (i = 0; i < lttpr_count; i++) |
| intel_dp_read_lttpr_phy_caps(intel_dp, dpcd, DP_PHY_LTTPR(i)); |
| |
| return lttpr_count; |
| } |
| |
| int intel_dp_read_dprx_caps(struct intel_dp *intel_dp, u8 dpcd[DP_RECEIVER_CAP_SIZE]) |
| { |
| struct intel_display *display = to_intel_display(intel_dp); |
| struct drm_i915_private *i915 = to_i915(display->drm); |
| |
| if (intel_dp_is_edp(intel_dp)) |
| return 0; |
| |
| /* |
| * Detecting LTTPRs must be avoided on platforms with an AUX timeout |
| * period < 3.2ms. (see DP Standard v2.0, 2.11.2, 3.6.6.1). |
| */ |
| if (DISPLAY_VER(display) >= 10 && !IS_GEMINILAKE(i915)) |
| if (drm_dp_dpcd_probe(&intel_dp->aux, |
| DP_LT_TUNABLE_PHY_REPEATER_FIELD_DATA_STRUCTURE_REV)) |
| return -EIO; |
| |
| if (drm_dp_read_dpcd_caps(&intel_dp->aux, dpcd)) |
| return -EIO; |
| |
| return 0; |
| } |
| |
| /** |
| * intel_dp_init_lttpr_and_dprx_caps - detect LTTPR and DPRX caps, init the LTTPR link training mode |
| * @intel_dp: Intel DP struct |
| * |
| * Read the LTTPR common and DPRX capabilities and switch to non-transparent |
| * link training mode if any is detected and read the PHY capabilities for all |
| * detected LTTPRs. In case of an LTTPR detection error or if the number of |
| * LTTPRs is more than is supported (8), fall back to the no-LTTPR, |
| * transparent mode link training mode. |
| * |
| * Returns: |
| * >0 if LTTPRs were detected and the non-transparent LT mode was set. The |
| * DPRX capabilities are read out. |
| * 0 if no LTTPRs or more than 8 LTTPRs were detected or in case of a |
| * detection failure and the transparent LT mode was set. The DPRX |
| * capabilities are read out. |
| * <0 Reading out the DPRX capabilities failed. |
| */ |
| int intel_dp_init_lttpr_and_dprx_caps(struct intel_dp *intel_dp) |
| { |
| struct intel_display *display = to_intel_display(intel_dp); |
| struct drm_i915_private *i915 = to_i915(display->drm); |
| int lttpr_count = 0; |
| |
| /* |
| * Detecting LTTPRs must be avoided on platforms with an AUX timeout |
| * period < 3.2ms. (see DP Standard v2.0, 2.11.2, 3.6.6.1). |
| */ |
| if (!intel_dp_is_edp(intel_dp) && |
| (DISPLAY_VER(display) >= 10 && !IS_GEMINILAKE(i915))) { |
| u8 dpcd[DP_RECEIVER_CAP_SIZE]; |
| int err = intel_dp_read_dprx_caps(intel_dp, dpcd); |
| |
| if (err != 0) |
| return err; |
| |
| lttpr_count = intel_dp_init_lttpr(intel_dp, dpcd); |
| } |
| |
| /* |
| * The DPTX shall read the DPRX caps after LTTPR detection, so re-read |
| * it here. |
| */ |
| if (drm_dp_read_dpcd_caps(&intel_dp->aux, intel_dp->dpcd)) { |
| intel_dp_reset_lttpr_common_caps(intel_dp); |
| return -EIO; |
| } |
| |
| return lttpr_count; |
| } |
| |
| static u8 dp_voltage_max(u8 preemph) |
| { |
| switch (preemph & DP_TRAIN_PRE_EMPHASIS_MASK) { |
| case DP_TRAIN_PRE_EMPH_LEVEL_0: |
| return DP_TRAIN_VOLTAGE_SWING_LEVEL_3; |
| case DP_TRAIN_PRE_EMPH_LEVEL_1: |
| return DP_TRAIN_VOLTAGE_SWING_LEVEL_2; |
| case DP_TRAIN_PRE_EMPH_LEVEL_2: |
| return DP_TRAIN_VOLTAGE_SWING_LEVEL_1; |
| case DP_TRAIN_PRE_EMPH_LEVEL_3: |
| default: |
| return DP_TRAIN_VOLTAGE_SWING_LEVEL_0; |
| } |
| } |
| |
| static u8 intel_dp_lttpr_voltage_max(struct intel_dp *intel_dp, |
| enum drm_dp_phy dp_phy) |
| { |
| const u8 *phy_caps = intel_dp_lttpr_phy_caps(intel_dp, dp_phy); |
| |
| if (drm_dp_lttpr_voltage_swing_level_3_supported(phy_caps)) |
| return DP_TRAIN_VOLTAGE_SWING_LEVEL_3; |
| else |
| return DP_TRAIN_VOLTAGE_SWING_LEVEL_2; |
| } |
| |
| static u8 intel_dp_lttpr_preemph_max(struct intel_dp *intel_dp, |
| enum drm_dp_phy dp_phy) |
| { |
| const u8 *phy_caps = intel_dp_lttpr_phy_caps(intel_dp, dp_phy); |
| |
| if (drm_dp_lttpr_pre_emphasis_level_3_supported(phy_caps)) |
| return DP_TRAIN_PRE_EMPH_LEVEL_3; |
| else |
| return DP_TRAIN_PRE_EMPH_LEVEL_2; |
| } |
| |
| static bool |
| intel_dp_phy_is_downstream_of_source(struct intel_dp *intel_dp, |
| enum drm_dp_phy dp_phy) |
| { |
| struct intel_display *display = to_intel_display(intel_dp); |
| int lttpr_count = drm_dp_lttpr_count(intel_dp->lttpr_common_caps); |
| |
| drm_WARN_ON_ONCE(display->drm, |
| lttpr_count <= 0 && dp_phy != DP_PHY_DPRX); |
| |
| return lttpr_count <= 0 || dp_phy == DP_PHY_LTTPR(lttpr_count - 1); |
| } |
| |
| static u8 intel_dp_phy_voltage_max(struct intel_dp *intel_dp, |
| const struct intel_crtc_state *crtc_state, |
| enum drm_dp_phy dp_phy) |
| { |
| struct intel_display *display = to_intel_display(intel_dp); |
| u8 voltage_max; |
| |
| /* |
| * Get voltage_max from the DPTX_PHY (source or LTTPR) upstream from |
| * the DPRX_PHY we train. |
| */ |
| if (intel_dp_phy_is_downstream_of_source(intel_dp, dp_phy)) |
| voltage_max = intel_dp->voltage_max(intel_dp, crtc_state); |
| else |
| voltage_max = intel_dp_lttpr_voltage_max(intel_dp, dp_phy + 1); |
| |
| drm_WARN_ON_ONCE(display->drm, |
| voltage_max != DP_TRAIN_VOLTAGE_SWING_LEVEL_2 && |
| voltage_max != DP_TRAIN_VOLTAGE_SWING_LEVEL_3); |
| |
| return voltage_max; |
| } |
| |
| static u8 intel_dp_phy_preemph_max(struct intel_dp *intel_dp, |
| enum drm_dp_phy dp_phy) |
| { |
| struct intel_display *display = to_intel_display(intel_dp); |
| u8 preemph_max; |
| |
| /* |
| * Get preemph_max from the DPTX_PHY (source or LTTPR) upstream from |
| * the DPRX_PHY we train. |
| */ |
| if (intel_dp_phy_is_downstream_of_source(intel_dp, dp_phy)) |
| preemph_max = intel_dp->preemph_max(intel_dp); |
| else |
| preemph_max = intel_dp_lttpr_preemph_max(intel_dp, dp_phy + 1); |
| |
| drm_WARN_ON_ONCE(display->drm, |
| preemph_max != DP_TRAIN_PRE_EMPH_LEVEL_2 && |
| preemph_max != DP_TRAIN_PRE_EMPH_LEVEL_3); |
| |
| return preemph_max; |
| } |
| |
| static bool has_per_lane_signal_levels(struct intel_dp *intel_dp, |
| enum drm_dp_phy dp_phy) |
| { |
| struct intel_display *display = to_intel_display(intel_dp); |
| struct drm_i915_private *i915 = to_i915(display->drm); |
| |
| return !intel_dp_phy_is_downstream_of_source(intel_dp, dp_phy) || |
| DISPLAY_VER(display) >= 10 || IS_BROXTON(i915); |
| } |
| |
| /* 128b/132b */ |
| static u8 intel_dp_get_lane_adjust_tx_ffe_preset(struct intel_dp *intel_dp, |
| const struct intel_crtc_state *crtc_state, |
| enum drm_dp_phy dp_phy, |
| const u8 link_status[DP_LINK_STATUS_SIZE], |
| int lane) |
| { |
| u8 tx_ffe = 0; |
| |
| if (has_per_lane_signal_levels(intel_dp, dp_phy)) { |
| lane = min(lane, crtc_state->lane_count - 1); |
| tx_ffe = drm_dp_get_adjust_tx_ffe_preset(link_status, lane); |
| } else { |
| for (lane = 0; lane < crtc_state->lane_count; lane++) |
| tx_ffe = max(tx_ffe, drm_dp_get_adjust_tx_ffe_preset(link_status, lane)); |
| } |
| |
| return tx_ffe; |
| } |
| |
| /* 8b/10b */ |
| static u8 intel_dp_get_lane_adjust_vswing_preemph(struct intel_dp *intel_dp, |
| const struct intel_crtc_state *crtc_state, |
| enum drm_dp_phy dp_phy, |
| const u8 link_status[DP_LINK_STATUS_SIZE], |
| int lane) |
| { |
| u8 v = 0; |
| u8 p = 0; |
| u8 voltage_max; |
| u8 preemph_max; |
| |
| if (has_per_lane_signal_levels(intel_dp, dp_phy)) { |
| lane = min(lane, crtc_state->lane_count - 1); |
| |
| v = drm_dp_get_adjust_request_voltage(link_status, lane); |
| p = drm_dp_get_adjust_request_pre_emphasis(link_status, lane); |
| } else { |
| for (lane = 0; lane < crtc_state->lane_count; lane++) { |
| v = max(v, drm_dp_get_adjust_request_voltage(link_status, lane)); |
| p = max(p, drm_dp_get_adjust_request_pre_emphasis(link_status, lane)); |
| } |
| } |
| |
| preemph_max = intel_dp_phy_preemph_max(intel_dp, dp_phy); |
| if (p >= preemph_max) |
| p = preemph_max | DP_TRAIN_MAX_PRE_EMPHASIS_REACHED; |
| |
| v = min(v, dp_voltage_max(p)); |
| |
| voltage_max = intel_dp_phy_voltage_max(intel_dp, crtc_state, dp_phy); |
| if (v >= voltage_max) |
| v = voltage_max | DP_TRAIN_MAX_SWING_REACHED; |
| |
| return v | p; |
| } |
| |
| static u8 intel_dp_get_lane_adjust_train(struct intel_dp *intel_dp, |
| const struct intel_crtc_state *crtc_state, |
| enum drm_dp_phy dp_phy, |
| const u8 link_status[DP_LINK_STATUS_SIZE], |
| int lane) |
| { |
| if (intel_dp_is_uhbr(crtc_state)) |
| return intel_dp_get_lane_adjust_tx_ffe_preset(intel_dp, crtc_state, |
| dp_phy, link_status, lane); |
| else |
| return intel_dp_get_lane_adjust_vswing_preemph(intel_dp, crtc_state, |
| dp_phy, link_status, lane); |
| } |
| |
| #define TRAIN_REQ_FMT "%d/%d/%d/%d" |
| #define _TRAIN_REQ_VSWING_ARGS(link_status, lane) \ |
| (drm_dp_get_adjust_request_voltage((link_status), (lane)) >> DP_TRAIN_VOLTAGE_SWING_SHIFT) |
| #define TRAIN_REQ_VSWING_ARGS(link_status) \ |
| _TRAIN_REQ_VSWING_ARGS(link_status, 0), \ |
| _TRAIN_REQ_VSWING_ARGS(link_status, 1), \ |
| _TRAIN_REQ_VSWING_ARGS(link_status, 2), \ |
| _TRAIN_REQ_VSWING_ARGS(link_status, 3) |
| #define _TRAIN_REQ_PREEMPH_ARGS(link_status, lane) \ |
| (drm_dp_get_adjust_request_pre_emphasis((link_status), (lane)) >> DP_TRAIN_PRE_EMPHASIS_SHIFT) |
| #define TRAIN_REQ_PREEMPH_ARGS(link_status) \ |
| _TRAIN_REQ_PREEMPH_ARGS(link_status, 0), \ |
| _TRAIN_REQ_PREEMPH_ARGS(link_status, 1), \ |
| _TRAIN_REQ_PREEMPH_ARGS(link_status, 2), \ |
| _TRAIN_REQ_PREEMPH_ARGS(link_status, 3) |
| #define _TRAIN_REQ_TX_FFE_ARGS(link_status, lane) \ |
| drm_dp_get_adjust_tx_ffe_preset((link_status), (lane)) |
| #define TRAIN_REQ_TX_FFE_ARGS(link_status) \ |
| _TRAIN_REQ_TX_FFE_ARGS(link_status, 0), \ |
| _TRAIN_REQ_TX_FFE_ARGS(link_status, 1), \ |
| _TRAIN_REQ_TX_FFE_ARGS(link_status, 2), \ |
| _TRAIN_REQ_TX_FFE_ARGS(link_status, 3) |
| |
| void |
| intel_dp_get_adjust_train(struct intel_dp *intel_dp, |
| const struct intel_crtc_state *crtc_state, |
| enum drm_dp_phy dp_phy, |
| const u8 link_status[DP_LINK_STATUS_SIZE]) |
| { |
| int lane; |
| |
| if (intel_dp_is_uhbr(crtc_state)) { |
| lt_dbg(intel_dp, dp_phy, |
| "128b/132b, lanes: %d, " |
| "TX FFE request: " TRAIN_REQ_FMT "\n", |
| crtc_state->lane_count, |
| TRAIN_REQ_TX_FFE_ARGS(link_status)); |
| } else { |
| lt_dbg(intel_dp, dp_phy, |
| "8b/10b, lanes: %d, " |
| "vswing request: " TRAIN_REQ_FMT ", " |
| "pre-emphasis request: " TRAIN_REQ_FMT "\n", |
| crtc_state->lane_count, |
| TRAIN_REQ_VSWING_ARGS(link_status), |
| TRAIN_REQ_PREEMPH_ARGS(link_status)); |
| } |
| |
| for (lane = 0; lane < 4; lane++) |
| intel_dp->train_set[lane] = |
| intel_dp_get_lane_adjust_train(intel_dp, crtc_state, |
| dp_phy, link_status, lane); |
| } |
| |
| static int intel_dp_training_pattern_set_reg(struct intel_dp *intel_dp, |
| enum drm_dp_phy dp_phy) |
| { |
| return dp_phy == DP_PHY_DPRX ? |
| DP_TRAINING_PATTERN_SET : |
| DP_TRAINING_PATTERN_SET_PHY_REPEATER(dp_phy); |
| } |
| |
| static bool |
| intel_dp_set_link_train(struct intel_dp *intel_dp, |
| const struct intel_crtc_state *crtc_state, |
| enum drm_dp_phy dp_phy, |
| u8 dp_train_pat) |
| { |
| int reg = intel_dp_training_pattern_set_reg(intel_dp, dp_phy); |
| u8 buf[sizeof(intel_dp->train_set) + 1]; |
| int len; |
| |
| intel_dp_program_link_training_pattern(intel_dp, crtc_state, |
| dp_phy, dp_train_pat); |
| |
| buf[0] = dp_train_pat; |
| /* DP_TRAINING_LANEx_SET follow DP_TRAINING_PATTERN_SET */ |
| memcpy(buf + 1, intel_dp->train_set, crtc_state->lane_count); |
| len = crtc_state->lane_count + 1; |
| |
| return drm_dp_dpcd_write(&intel_dp->aux, reg, buf, len) == len; |
| } |
| |
| static char dp_training_pattern_name(u8 train_pat) |
| { |
| switch (train_pat) { |
| case DP_TRAINING_PATTERN_1: |
| case DP_TRAINING_PATTERN_2: |
| case DP_TRAINING_PATTERN_3: |
| return '0' + train_pat; |
| case DP_TRAINING_PATTERN_4: |
| return '4'; |
| default: |
| MISSING_CASE(train_pat); |
| return '?'; |
| } |
| } |
| |
| void |
| intel_dp_program_link_training_pattern(struct intel_dp *intel_dp, |
| const struct intel_crtc_state *crtc_state, |
| enum drm_dp_phy dp_phy, |
| u8 dp_train_pat) |
| { |
| u8 train_pat = intel_dp_training_pattern_symbol(dp_train_pat); |
| |
| if (train_pat != DP_TRAINING_PATTERN_DISABLE) |
| lt_dbg(intel_dp, dp_phy, "Using DP training pattern TPS%c\n", |
| dp_training_pattern_name(train_pat)); |
| |
| intel_dp->set_link_train(intel_dp, crtc_state, dp_train_pat); |
| } |
| |
| #define TRAIN_SET_FMT "%d%s/%d%s/%d%s/%d%s" |
| #define _TRAIN_SET_VSWING_ARGS(train_set) \ |
| ((train_set) & DP_TRAIN_VOLTAGE_SWING_MASK) >> DP_TRAIN_VOLTAGE_SWING_SHIFT, \ |
| (train_set) & DP_TRAIN_MAX_SWING_REACHED ? "(max)" : "" |
| #define TRAIN_SET_VSWING_ARGS(train_set) \ |
| _TRAIN_SET_VSWING_ARGS((train_set)[0]), \ |
| _TRAIN_SET_VSWING_ARGS((train_set)[1]), \ |
| _TRAIN_SET_VSWING_ARGS((train_set)[2]), \ |
| _TRAIN_SET_VSWING_ARGS((train_set)[3]) |
| #define _TRAIN_SET_PREEMPH_ARGS(train_set) \ |
| ((train_set) & DP_TRAIN_PRE_EMPHASIS_MASK) >> DP_TRAIN_PRE_EMPHASIS_SHIFT, \ |
| (train_set) & DP_TRAIN_MAX_PRE_EMPHASIS_REACHED ? "(max)" : "" |
| #define TRAIN_SET_PREEMPH_ARGS(train_set) \ |
| _TRAIN_SET_PREEMPH_ARGS((train_set)[0]), \ |
| _TRAIN_SET_PREEMPH_ARGS((train_set)[1]), \ |
| _TRAIN_SET_PREEMPH_ARGS((train_set)[2]), \ |
| _TRAIN_SET_PREEMPH_ARGS((train_set)[3]) |
| #define _TRAIN_SET_TX_FFE_ARGS(train_set) \ |
| ((train_set) & DP_TX_FFE_PRESET_VALUE_MASK), "" |
| #define TRAIN_SET_TX_FFE_ARGS(train_set) \ |
| _TRAIN_SET_TX_FFE_ARGS((train_set)[0]), \ |
| _TRAIN_SET_TX_FFE_ARGS((train_set)[1]), \ |
| _TRAIN_SET_TX_FFE_ARGS((train_set)[2]), \ |
| _TRAIN_SET_TX_FFE_ARGS((train_set)[3]) |
| |
| void intel_dp_set_signal_levels(struct intel_dp *intel_dp, |
| const struct intel_crtc_state *crtc_state, |
| enum drm_dp_phy dp_phy) |
| { |
| struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)->base; |
| |
| if (intel_dp_is_uhbr(crtc_state)) { |
| lt_dbg(intel_dp, dp_phy, |
| "128b/132b, lanes: %d, " |
| "TX FFE presets: " TRAIN_SET_FMT "\n", |
| crtc_state->lane_count, |
| TRAIN_SET_TX_FFE_ARGS(intel_dp->train_set)); |
| } else { |
| lt_dbg(intel_dp, dp_phy, |
| "8b/10b, lanes: %d, " |
| "vswing levels: " TRAIN_SET_FMT ", " |
| "pre-emphasis levels: " TRAIN_SET_FMT "\n", |
| crtc_state->lane_count, |
| TRAIN_SET_VSWING_ARGS(intel_dp->train_set), |
| TRAIN_SET_PREEMPH_ARGS(intel_dp->train_set)); |
| } |
| |
| if (intel_dp_phy_is_downstream_of_source(intel_dp, dp_phy)) |
| encoder->set_signal_levels(encoder, crtc_state); |
| } |
| |
| static bool |
| intel_dp_reset_link_train(struct intel_dp *intel_dp, |
| const struct intel_crtc_state *crtc_state, |
| enum drm_dp_phy dp_phy, |
| u8 dp_train_pat) |
| { |
| memset(intel_dp->train_set, 0, sizeof(intel_dp->train_set)); |
| intel_dp_set_signal_levels(intel_dp, crtc_state, dp_phy); |
| return intel_dp_set_link_train(intel_dp, crtc_state, dp_phy, dp_train_pat); |
| } |
| |
| static bool |
| intel_dp_update_link_train(struct intel_dp *intel_dp, |
| const struct intel_crtc_state *crtc_state, |
| enum drm_dp_phy dp_phy) |
| { |
| int reg = dp_phy == DP_PHY_DPRX ? |
| DP_TRAINING_LANE0_SET : |
| DP_TRAINING_LANE0_SET_PHY_REPEATER(dp_phy); |
| int ret; |
| |
| intel_dp_set_signal_levels(intel_dp, crtc_state, dp_phy); |
| |
| ret = drm_dp_dpcd_write(&intel_dp->aux, reg, |
| intel_dp->train_set, crtc_state->lane_count); |
| |
| return ret == crtc_state->lane_count; |
| } |
| |
| /* 128b/132b */ |
| static bool intel_dp_lane_max_tx_ffe_reached(u8 train_set_lane) |
| { |
| return (train_set_lane & DP_TX_FFE_PRESET_VALUE_MASK) == |
| DP_TX_FFE_PRESET_VALUE_MASK; |
| } |
| |
| /* |
| * 8b/10b |
| * |
| * FIXME: The DP spec is very confusing here, also the Link CTS spec seems to |
| * have self contradicting tests around this area. |
| * |
| * In lieu of better ideas let's just stop when we've reached the max supported |
| * vswing with its max pre-emphasis, which is either 2+1 or 3+0 depending on |
| * whether vswing level 3 is supported or not. |
| */ |
| static bool intel_dp_lane_max_vswing_reached(u8 train_set_lane) |
| { |
| u8 v = (train_set_lane & DP_TRAIN_VOLTAGE_SWING_MASK) >> |
| DP_TRAIN_VOLTAGE_SWING_SHIFT; |
| u8 p = (train_set_lane & DP_TRAIN_PRE_EMPHASIS_MASK) >> |
| DP_TRAIN_PRE_EMPHASIS_SHIFT; |
| |
| if ((train_set_lane & DP_TRAIN_MAX_SWING_REACHED) == 0) |
| return false; |
| |
| if (v + p != 3) |
| return false; |
| |
| return true; |
| } |
| |
| static bool intel_dp_link_max_vswing_reached(struct intel_dp *intel_dp, |
| const struct intel_crtc_state *crtc_state) |
| { |
| int lane; |
| |
| for (lane = 0; lane < crtc_state->lane_count; lane++) { |
| u8 train_set_lane = intel_dp->train_set[lane]; |
| |
| if (intel_dp_is_uhbr(crtc_state)) { |
| if (!intel_dp_lane_max_tx_ffe_reached(train_set_lane)) |
| return false; |
| } else { |
| if (!intel_dp_lane_max_vswing_reached(train_set_lane)) |
| return false; |
| } |
| } |
| |
| return true; |
| } |
| |
| void intel_dp_link_training_set_mode(struct intel_dp *intel_dp, int link_rate, bool is_vrr) |
| { |
| u8 link_config[2]; |
| |
| link_config[0] = is_vrr ? DP_MSA_TIMING_PAR_IGNORE_EN : 0; |
| link_config[1] = drm_dp_is_uhbr_rate(link_rate) ? |
| DP_SET_ANSI_128B132B : DP_SET_ANSI_8B10B; |
| drm_dp_dpcd_write(&intel_dp->aux, DP_DOWNSPREAD_CTRL, link_config, 2); |
| } |
| |
| static void intel_dp_update_downspread_ctrl(struct intel_dp *intel_dp, |
| const struct intel_crtc_state *crtc_state) |
| { |
| intel_dp_link_training_set_mode(intel_dp, |
| crtc_state->port_clock, crtc_state->vrr.flipline); |
| } |
| |
| void intel_dp_link_training_set_bw(struct intel_dp *intel_dp, |
| int link_bw, int rate_select, int lane_count, |
| bool enhanced_framing) |
| { |
| if (enhanced_framing) |
| lane_count |= DP_LANE_COUNT_ENHANCED_FRAME_EN; |
| |
| if (link_bw) { |
| /* DP and eDP v1.3 and earlier link bw set method. */ |
| u8 link_config[] = { link_bw, lane_count }; |
| |
| drm_dp_dpcd_write(&intel_dp->aux, DP_LINK_BW_SET, link_config, |
| ARRAY_SIZE(link_config)); |
| } else { |
| /* |
| * eDP v1.4 and later link rate set method. |
| * |
| * eDP v1.4x sinks shall ignore DP_LINK_RATE_SET if |
| * DP_LINK_BW_SET is set. Avoid writing DP_LINK_BW_SET. |
| * |
| * eDP v1.5 sinks allow choosing either, and the last choice |
| * shall be active. |
| */ |
| drm_dp_dpcd_writeb(&intel_dp->aux, DP_LANE_COUNT_SET, lane_count); |
| drm_dp_dpcd_writeb(&intel_dp->aux, DP_LINK_RATE_SET, rate_select); |
| } |
| } |
| |
| static void intel_dp_update_link_bw_set(struct intel_dp *intel_dp, |
| const struct intel_crtc_state *crtc_state, |
| u8 link_bw, u8 rate_select) |
| { |
| intel_dp_link_training_set_bw(intel_dp, link_bw, rate_select, crtc_state->lane_count, |
| crtc_state->enhanced_framing); |
| } |
| |
| /* |
| * Prepare link training by configuring the link parameters. On DDI platforms |
| * also enable the port here. |
| */ |
| static bool |
| intel_dp_prepare_link_train(struct intel_dp *intel_dp, |
| const struct intel_crtc_state *crtc_state) |
| { |
| u8 link_bw, rate_select; |
| |
| if (intel_dp->prepare_link_retrain) |
| intel_dp->prepare_link_retrain(intel_dp, crtc_state); |
| |
| intel_dp_compute_rate(intel_dp, crtc_state->port_clock, |
| &link_bw, &rate_select); |
| |
| /* |
| * WaEdpLinkRateDataReload |
| * |
| * Parade PS8461E MUX (used on varius TGL+ laptops) needs |
| * to snoop the link rates reported by the sink when we |
| * use LINK_RATE_SET in order to operate in jitter cleaning |
| * mode (as opposed to redriver mode). Unfortunately it |
| * loses track of the snooped link rates when powered down, |
| * so we need to make it re-snoop often. Without this high |
| * link rates are not stable. |
| */ |
| if (!link_bw) { |
| __le16 sink_rates[DP_MAX_SUPPORTED_RATES]; |
| |
| lt_dbg(intel_dp, DP_PHY_DPRX, "Reloading eDP link rates\n"); |
| |
| drm_dp_dpcd_read(&intel_dp->aux, DP_SUPPORTED_LINK_RATES, |
| sink_rates, sizeof(sink_rates)); |
| } |
| |
| if (link_bw) |
| lt_dbg(intel_dp, DP_PHY_DPRX, "Using LINK_BW_SET value %02x\n", |
| link_bw); |
| else |
| lt_dbg(intel_dp, DP_PHY_DPRX, |
| "Using LINK_RATE_SET value %02x\n", |
| rate_select); |
| /* |
| * Spec DP2.1 Section 3.5.2.16 |
| * Prior to LT DPTX should set 128b/132b DP Channel coding and then set link rate |
| */ |
| intel_dp_update_downspread_ctrl(intel_dp, crtc_state); |
| intel_dp_update_link_bw_set(intel_dp, crtc_state, link_bw, |
| rate_select); |
| |
| return true; |
| } |
| |
| static bool intel_dp_adjust_request_changed(const struct intel_crtc_state *crtc_state, |
| const u8 old_link_status[DP_LINK_STATUS_SIZE], |
| const u8 new_link_status[DP_LINK_STATUS_SIZE]) |
| { |
| int lane; |
| |
| for (lane = 0; lane < crtc_state->lane_count; lane++) { |
| u8 old, new; |
| |
| if (intel_dp_is_uhbr(crtc_state)) { |
| old = drm_dp_get_adjust_tx_ffe_preset(old_link_status, lane); |
| new = drm_dp_get_adjust_tx_ffe_preset(new_link_status, lane); |
| } else { |
| old = drm_dp_get_adjust_request_voltage(old_link_status, lane) | |
| drm_dp_get_adjust_request_pre_emphasis(old_link_status, lane); |
| new = drm_dp_get_adjust_request_voltage(new_link_status, lane) | |
| drm_dp_get_adjust_request_pre_emphasis(new_link_status, lane); |
| } |
| |
| if (old != new) |
| return true; |
| } |
| |
| return false; |
| } |
| |
| void |
| intel_dp_dump_link_status(struct intel_dp *intel_dp, enum drm_dp_phy dp_phy, |
| const u8 link_status[DP_LINK_STATUS_SIZE]) |
| { |
| lt_dbg(intel_dp, dp_phy, |
| "ln0_1:0x%x ln2_3:0x%x align:0x%x sink:0x%x adj_req0_1:0x%x adj_req2_3:0x%x\n", |
| link_status[0], link_status[1], link_status[2], |
| link_status[3], link_status[4], link_status[5]); |
| } |
| |
| /* |
| * Perform the link training clock recovery phase on the given DP PHY using |
| * training pattern 1. |
| */ |
| static bool |
| intel_dp_link_training_clock_recovery(struct intel_dp *intel_dp, |
| const struct intel_crtc_state *crtc_state, |
| enum drm_dp_phy dp_phy) |
| { |
| u8 old_link_status[DP_LINK_STATUS_SIZE] = {}; |
| int voltage_tries, cr_tries, max_cr_tries; |
| u8 link_status[DP_LINK_STATUS_SIZE]; |
| bool max_vswing_reached = false; |
| int delay_us; |
| |
| delay_us = drm_dp_read_clock_recovery_delay(&intel_dp->aux, |
| intel_dp->dpcd, dp_phy, |
| intel_dp_is_uhbr(crtc_state)); |
| |
| /* clock recovery */ |
| if (!intel_dp_reset_link_train(intel_dp, crtc_state, dp_phy, |
| DP_TRAINING_PATTERN_1 | |
| DP_LINK_SCRAMBLING_DISABLE)) { |
| lt_err(intel_dp, dp_phy, "Failed to enable link training\n"); |
| return false; |
| } |
| |
| /* |
| * The DP 1.4 spec defines the max clock recovery retries value |
| * as 10 but for pre-DP 1.4 devices we set a very tolerant |
| * retry limit of 80 (4 voltage levels x 4 preemphasis levels x |
| * x 5 identical voltage retries). Since the previous specs didn't |
| * define a limit and created the possibility of an infinite loop |
| * we want to prevent any sync from triggering that corner case. |
| */ |
| if (intel_dp->dpcd[DP_DPCD_REV] >= DP_DPCD_REV_14) |
| max_cr_tries = 10; |
| else |
| max_cr_tries = 80; |
| |
| voltage_tries = 1; |
| for (cr_tries = 0; cr_tries < max_cr_tries; ++cr_tries) { |
| usleep_range(delay_us, 2 * delay_us); |
| |
| if (drm_dp_dpcd_read_phy_link_status(&intel_dp->aux, dp_phy, |
| link_status) < 0) { |
| lt_err(intel_dp, dp_phy, "Failed to get link status\n"); |
| return false; |
| } |
| |
| if (drm_dp_clock_recovery_ok(link_status, crtc_state->lane_count)) { |
| lt_dbg(intel_dp, dp_phy, "Clock recovery OK\n"); |
| return true; |
| } |
| |
| if (voltage_tries == 5) { |
| intel_dp_dump_link_status(intel_dp, dp_phy, link_status); |
| lt_dbg(intel_dp, dp_phy, "Same voltage tried 5 times\n"); |
| return false; |
| } |
| |
| if (max_vswing_reached) { |
| intel_dp_dump_link_status(intel_dp, dp_phy, link_status); |
| lt_dbg(intel_dp, dp_phy, "Max Voltage Swing reached\n"); |
| return false; |
| } |
| |
| /* Update training set as requested by target */ |
| intel_dp_get_adjust_train(intel_dp, crtc_state, dp_phy, |
| link_status); |
| if (!intel_dp_update_link_train(intel_dp, crtc_state, dp_phy)) { |
| lt_err(intel_dp, dp_phy, "Failed to update link training\n"); |
| return false; |
| } |
| |
| if (!intel_dp_adjust_request_changed(crtc_state, old_link_status, link_status)) |
| ++voltage_tries; |
| else |
| voltage_tries = 1; |
| |
| memcpy(old_link_status, link_status, sizeof(link_status)); |
| |
| if (intel_dp_link_max_vswing_reached(intel_dp, crtc_state)) |
| max_vswing_reached = true; |
| } |
| |
| intel_dp_dump_link_status(intel_dp, dp_phy, link_status); |
| lt_err(intel_dp, dp_phy, "Failed clock recovery %d times, giving up!\n", |
| max_cr_tries); |
| |
| return false; |
| } |
| |
| /* |
| * Pick Training Pattern Sequence (TPS) for channel equalization. 128b/132b TPS2 |
| * for UHBR+, TPS4 for HBR3 or for 1.4 devices that support it, TPS3 for HBR2 or |
| * 1.2 devices that support it, TPS2 otherwise. |
| */ |
| static u32 intel_dp_training_pattern(struct intel_dp *intel_dp, |
| const struct intel_crtc_state *crtc_state, |
| enum drm_dp_phy dp_phy) |
| { |
| struct intel_display *display = to_intel_display(intel_dp); |
| struct drm_i915_private *i915 = to_i915(display->drm); |
| bool source_tps3, sink_tps3, source_tps4, sink_tps4; |
| |
| /* UHBR+ use separate 128b/132b TPS2 */ |
| if (intel_dp_is_uhbr(crtc_state)) |
| return DP_TRAINING_PATTERN_2; |
| |
| /* |
| * TPS4 support is mandatory for all downstream devices that |
| * support HBR3. There are no known eDP panels that support |
| * TPS4 as of Feb 2018 as per VESA eDP_v1.4b_E1 specification. |
| * LTTPRs must support TPS4. |
| */ |
| source_tps4 = intel_dp_source_supports_tps4(i915); |
| sink_tps4 = dp_phy != DP_PHY_DPRX || |
| drm_dp_tps4_supported(intel_dp->dpcd); |
| if (source_tps4 && sink_tps4) { |
| return DP_TRAINING_PATTERN_4; |
| } else if (crtc_state->port_clock == 810000) { |
| if (!source_tps4) |
| lt_dbg(intel_dp, dp_phy, |
| "8.1 Gbps link rate without source TPS4 support\n"); |
| if (!sink_tps4) |
| lt_dbg(intel_dp, dp_phy, |
| "8.1 Gbps link rate without sink TPS4 support\n"); |
| } |
| |
| /* |
| * TPS3 support is mandatory for downstream devices that |
| * support HBR2. However, not all sinks follow the spec. |
| */ |
| source_tps3 = intel_dp_source_supports_tps3(i915); |
| sink_tps3 = dp_phy != DP_PHY_DPRX || |
| drm_dp_tps3_supported(intel_dp->dpcd); |
| if (source_tps3 && sink_tps3) { |
| return DP_TRAINING_PATTERN_3; |
| } else if (crtc_state->port_clock >= 540000) { |
| if (!source_tps3) |
| lt_dbg(intel_dp, dp_phy, |
| ">=5.4/6.48 Gbps link rate without source TPS3 support\n"); |
| if (!sink_tps3) |
| lt_dbg(intel_dp, dp_phy, |
| ">=5.4/6.48 Gbps link rate without sink TPS3 support\n"); |
| } |
| |
| return DP_TRAINING_PATTERN_2; |
| } |
| |
| /* |
| * Perform the link training channel equalization phase on the given DP PHY |
| * using one of training pattern 2, 3 or 4 depending on the source and |
| * sink capabilities. |
| */ |
| static bool |
| intel_dp_link_training_channel_equalization(struct intel_dp *intel_dp, |
| const struct intel_crtc_state *crtc_state, |
| enum drm_dp_phy dp_phy) |
| { |
| int tries; |
| u32 training_pattern; |
| u8 link_status[DP_LINK_STATUS_SIZE]; |
| bool channel_eq = false; |
| int delay_us; |
| |
| delay_us = drm_dp_read_channel_eq_delay(&intel_dp->aux, |
| intel_dp->dpcd, dp_phy, |
| intel_dp_is_uhbr(crtc_state)); |
| |
| training_pattern = intel_dp_training_pattern(intel_dp, crtc_state, dp_phy); |
| /* Scrambling is disabled for TPS2/3 and enabled for TPS4 */ |
| if (training_pattern != DP_TRAINING_PATTERN_4) |
| training_pattern |= DP_LINK_SCRAMBLING_DISABLE; |
| |
| /* channel equalization */ |
| if (!intel_dp_set_link_train(intel_dp, crtc_state, dp_phy, |
| training_pattern)) { |
| lt_err(intel_dp, dp_phy, "Failed to start channel equalization\n"); |
| return false; |
| } |
| |
| for (tries = 0; tries < 5; tries++) { |
| usleep_range(delay_us, 2 * delay_us); |
| |
| if (drm_dp_dpcd_read_phy_link_status(&intel_dp->aux, dp_phy, |
| link_status) < 0) { |
| lt_err(intel_dp, dp_phy, "Failed to get link status\n"); |
| break; |
| } |
| |
| /* Make sure clock is still ok */ |
| if (!drm_dp_clock_recovery_ok(link_status, |
| crtc_state->lane_count)) { |
| intel_dp_dump_link_status(intel_dp, dp_phy, link_status); |
| lt_dbg(intel_dp, dp_phy, |
| "Clock recovery check failed, cannot continue channel equalization\n"); |
| break; |
| } |
| |
| if (drm_dp_channel_eq_ok(link_status, |
| crtc_state->lane_count)) { |
| channel_eq = true; |
| lt_dbg(intel_dp, dp_phy, "Channel EQ done. DP Training successful\n"); |
| break; |
| } |
| |
| /* Update training set as requested by target */ |
| intel_dp_get_adjust_train(intel_dp, crtc_state, dp_phy, |
| link_status); |
| if (!intel_dp_update_link_train(intel_dp, crtc_state, dp_phy)) { |
| lt_err(intel_dp, dp_phy, "Failed to update link training\n"); |
| break; |
| } |
| } |
| |
| /* Try 5 times, else fail and try at lower BW */ |
| if (tries == 5) { |
| intel_dp_dump_link_status(intel_dp, dp_phy, link_status); |
| lt_dbg(intel_dp, dp_phy, "Channel equalization failed 5 times\n"); |
| } |
| |
| return channel_eq; |
| } |
| |
| static bool intel_dp_disable_dpcd_training_pattern(struct intel_dp *intel_dp, |
| enum drm_dp_phy dp_phy) |
| { |
| int reg = intel_dp_training_pattern_set_reg(intel_dp, dp_phy); |
| u8 val = DP_TRAINING_PATTERN_DISABLE; |
| |
| return drm_dp_dpcd_write(&intel_dp->aux, reg, &val, 1) == 1; |
| } |
| |
| static int |
| intel_dp_128b132b_intra_hop(struct intel_dp *intel_dp, |
| const struct intel_crtc_state *crtc_state) |
| { |
| u8 sink_status; |
| int ret; |
| |
| ret = drm_dp_dpcd_readb(&intel_dp->aux, DP_SINK_STATUS, &sink_status); |
| if (ret != 1) { |
| lt_dbg(intel_dp, DP_PHY_DPRX, "Failed to read sink status\n"); |
| return ret < 0 ? ret : -EIO; |
| } |
| |
| return sink_status & DP_INTRA_HOP_AUX_REPLY_INDICATION ? 1 : 0; |
| } |
| |
| /** |
| * intel_dp_stop_link_train - stop link training |
| * @intel_dp: DP struct |
| * @crtc_state: state for CRTC attached to the encoder |
| * |
| * Stop the link training of the @intel_dp port, disabling the training |
| * pattern in the sink's DPCD, and disabling the test pattern symbol |
| * generation on the port. |
| * |
| * What symbols are output on the port after this point is |
| * platform specific: On DDI/VLV/CHV platforms it will be the idle pattern |
| * with the pipe being disabled, on older platforms it's HW specific if/how an |
| * idle pattern is generated, as the pipe is already enabled here for those. |
| * |
| * This function must be called after intel_dp_start_link_train(). |
| */ |
| void intel_dp_stop_link_train(struct intel_dp *intel_dp, |
| const struct intel_crtc_state *crtc_state) |
| { |
| intel_dp->link_trained = true; |
| |
| intel_dp_disable_dpcd_training_pattern(intel_dp, DP_PHY_DPRX); |
| intel_dp_program_link_training_pattern(intel_dp, crtc_state, DP_PHY_DPRX, |
| DP_TRAINING_PATTERN_DISABLE); |
| |
| if (intel_dp_is_uhbr(crtc_state) && |
| wait_for(intel_dp_128b132b_intra_hop(intel_dp, crtc_state) == 0, 500)) { |
| lt_dbg(intel_dp, DP_PHY_DPRX, "128b/132b intra-hop not clearing\n"); |
| } |
| } |
| |
| static bool |
| intel_dp_link_train_phy(struct intel_dp *intel_dp, |
| const struct intel_crtc_state *crtc_state, |
| enum drm_dp_phy dp_phy) |
| { |
| bool ret = false; |
| |
| if (!intel_dp_link_training_clock_recovery(intel_dp, crtc_state, dp_phy)) |
| goto out; |
| |
| if (!intel_dp_link_training_channel_equalization(intel_dp, crtc_state, dp_phy)) |
| goto out; |
| |
| ret = true; |
| |
| out: |
| lt_dbg(intel_dp, dp_phy, |
| "Link Training %s at link rate = %d, lane count = %d\n", |
| ret ? "passed" : "failed", |
| crtc_state->port_clock, crtc_state->lane_count); |
| |
| return ret; |
| } |
| |
| static bool intel_dp_can_link_train_fallback_for_edp(struct intel_dp *intel_dp, |
| int link_rate, |
| u8 lane_count) |
| { |
| /* FIXME figure out what we actually want here */ |
| const struct drm_display_mode *fixed_mode = |
| intel_panel_preferred_fixed_mode(intel_dp->attached_connector); |
| int mode_rate, max_rate; |
| |
| mode_rate = intel_dp_link_required(fixed_mode->clock, 18); |
| max_rate = intel_dp_max_link_data_rate(intel_dp, link_rate, lane_count); |
| if (mode_rate > max_rate) |
| return false; |
| |
| return true; |
| } |
| |
| static bool reduce_link_params_in_bw_order(struct intel_dp *intel_dp, |
| const struct intel_crtc_state *crtc_state, |
| int *new_link_rate, int *new_lane_count) |
| { |
| int link_rate; |
| int lane_count; |
| int i; |
| |
| i = intel_dp_link_config_index(intel_dp, crtc_state->port_clock, crtc_state->lane_count); |
| for (i--; i >= 0; i--) { |
| intel_dp_link_config_get(intel_dp, i, &link_rate, &lane_count); |
| |
| if ((intel_dp->link.force_rate && |
| intel_dp->link.force_rate != link_rate) || |
| (intel_dp->link.force_lane_count && |
| intel_dp->link.force_lane_count != lane_count)) |
| continue; |
| |
| break; |
| } |
| |
| if (i < 0) |
| return false; |
| |
| *new_link_rate = link_rate; |
| *new_lane_count = lane_count; |
| |
| return true; |
| } |
| |
| static int reduce_link_rate(struct intel_dp *intel_dp, int current_rate) |
| { |
| int rate_index; |
| int new_rate; |
| |
| if (intel_dp->link.force_rate) |
| return -1; |
| |
| rate_index = intel_dp_rate_index(intel_dp->common_rates, |
| intel_dp->num_common_rates, |
| current_rate); |
| |
| if (rate_index <= 0) |
| return -1; |
| |
| new_rate = intel_dp_common_rate(intel_dp, rate_index - 1); |
| |
| /* TODO: Make switching from UHBR to non-UHBR rates work. */ |
| if (drm_dp_is_uhbr_rate(current_rate) != drm_dp_is_uhbr_rate(new_rate)) |
| return -1; |
| |
| return new_rate; |
| } |
| |
| static int reduce_lane_count(struct intel_dp *intel_dp, int current_lane_count) |
| { |
| if (intel_dp->link.force_lane_count) |
| return -1; |
| |
| if (current_lane_count == 1) |
| return -1; |
| |
| return current_lane_count >> 1; |
| } |
| |
| static bool reduce_link_params_in_rate_lane_order(struct intel_dp *intel_dp, |
| const struct intel_crtc_state *crtc_state, |
| int *new_link_rate, int *new_lane_count) |
| { |
| int link_rate; |
| int lane_count; |
| |
| lane_count = crtc_state->lane_count; |
| link_rate = reduce_link_rate(intel_dp, crtc_state->port_clock); |
| if (link_rate < 0) { |
| lane_count = reduce_lane_count(intel_dp, crtc_state->lane_count); |
| link_rate = intel_dp_max_common_rate(intel_dp); |
| } |
| |
| if (lane_count < 0) |
| return false; |
| |
| *new_link_rate = link_rate; |
| *new_lane_count = lane_count; |
| |
| return true; |
| } |
| |
| static bool reduce_link_params(struct intel_dp *intel_dp, const struct intel_crtc_state *crtc_state, |
| int *new_link_rate, int *new_lane_count) |
| { |
| /* TODO: Use the same fallback logic on SST as on MST. */ |
| if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DP_MST)) |
| return reduce_link_params_in_bw_order(intel_dp, crtc_state, |
| new_link_rate, new_lane_count); |
| else |
| return reduce_link_params_in_rate_lane_order(intel_dp, crtc_state, |
| new_link_rate, new_lane_count); |
| } |
| |
| static int intel_dp_get_link_train_fallback_values(struct intel_dp *intel_dp, |
| const struct intel_crtc_state *crtc_state) |
| { |
| int new_link_rate; |
| int new_lane_count; |
| |
| if (intel_dp_is_edp(intel_dp) && !intel_dp->use_max_params) { |
| lt_dbg(intel_dp, DP_PHY_DPRX, |
| "Retrying Link training for eDP with max parameters\n"); |
| intel_dp->use_max_params = true; |
| return 0; |
| } |
| |
| if (!reduce_link_params(intel_dp, crtc_state, &new_link_rate, &new_lane_count)) |
| return -1; |
| |
| if (intel_dp_is_edp(intel_dp) && |
| !intel_dp_can_link_train_fallback_for_edp(intel_dp, new_link_rate, new_lane_count)) { |
| lt_dbg(intel_dp, DP_PHY_DPRX, |
| "Retrying Link training for eDP with same parameters\n"); |
| return 0; |
| } |
| |
| lt_dbg(intel_dp, DP_PHY_DPRX, |
| "Reducing link parameters from %dx%d to %dx%d\n", |
| crtc_state->lane_count, crtc_state->port_clock, |
| new_lane_count, new_link_rate); |
| |
| intel_dp->link.max_rate = new_link_rate; |
| intel_dp->link.max_lane_count = new_lane_count; |
| |
| return 0; |
| } |
| |
| static bool intel_dp_schedule_fallback_link_training(struct intel_atomic_state *state, |
| struct intel_dp *intel_dp, |
| const struct intel_crtc_state *crtc_state) |
| { |
| struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)->base; |
| |
| if (!intel_digital_port_connected(&dp_to_dig_port(intel_dp)->base)) { |
| lt_dbg(intel_dp, DP_PHY_DPRX, "Link Training failed on disconnected sink.\n"); |
| return true; |
| } |
| |
| if (intel_dp->hobl_active) { |
| lt_dbg(intel_dp, DP_PHY_DPRX, |
| "Link Training failed with HOBL active, not enabling it from now on\n"); |
| intel_dp->hobl_failed = true; |
| } else if (intel_dp_get_link_train_fallback_values(intel_dp, crtc_state)) { |
| return false; |
| } |
| |
| /* Schedule a Hotplug Uevent to userspace to start modeset */ |
| intel_dp_queue_modeset_retry_for_link(state, encoder, crtc_state); |
| |
| return true; |
| } |
| |
| /* Perform the link training on all LTTPRs and the DPRX on a link. */ |
| static bool |
| intel_dp_link_train_all_phys(struct intel_dp *intel_dp, |
| const struct intel_crtc_state *crtc_state, |
| int lttpr_count) |
| { |
| bool ret = true; |
| int i; |
| |
| for (i = lttpr_count - 1; i >= 0; i--) { |
| enum drm_dp_phy dp_phy = DP_PHY_LTTPR(i); |
| |
| ret = intel_dp_link_train_phy(intel_dp, crtc_state, dp_phy); |
| intel_dp_disable_dpcd_training_pattern(intel_dp, dp_phy); |
| |
| if (!ret) |
| break; |
| } |
| |
| if (ret) |
| ret = intel_dp_link_train_phy(intel_dp, crtc_state, DP_PHY_DPRX); |
| |
| if (intel_dp->set_idle_link_train) |
| intel_dp->set_idle_link_train(intel_dp, crtc_state); |
| |
| return ret; |
| } |
| |
| /* |
| * 128b/132b DP LANEx_EQ_DONE Sequence (DP 2.0 E11 3.5.2.16.1) |
| */ |
| static bool |
| intel_dp_128b132b_lane_eq(struct intel_dp *intel_dp, |
| const struct intel_crtc_state *crtc_state) |
| { |
| u8 link_status[DP_LINK_STATUS_SIZE]; |
| int delay_us; |
| int try, max_tries = 20; |
| unsigned long deadline; |
| bool timeout = false; |
| |
| /* |
| * Reset signal levels. Start transmitting 128b/132b TPS1. |
| * |
| * Put DPRX and LTTPRs (if any) into intra-hop AUX mode by writing TPS1 |
| * in DP_TRAINING_PATTERN_SET. |
| */ |
| if (!intel_dp_reset_link_train(intel_dp, crtc_state, DP_PHY_DPRX, |
| DP_TRAINING_PATTERN_1)) { |
| lt_err(intel_dp, DP_PHY_DPRX, "Failed to start 128b/132b TPS1\n"); |
| return false; |
| } |
| |
| delay_us = drm_dp_128b132b_read_aux_rd_interval(&intel_dp->aux); |
| |
| /* Read the initial TX FFE settings. */ |
| if (drm_dp_dpcd_read_link_status(&intel_dp->aux, link_status) < 0) { |
| lt_err(intel_dp, DP_PHY_DPRX, "Failed to read TX FFE presets\n"); |
| return false; |
| } |
| |
| /* Update signal levels and training set as requested. */ |
| intel_dp_get_adjust_train(intel_dp, crtc_state, DP_PHY_DPRX, link_status); |
| if (!intel_dp_update_link_train(intel_dp, crtc_state, DP_PHY_DPRX)) { |
| lt_err(intel_dp, DP_PHY_DPRX, "Failed to set initial TX FFE settings\n"); |
| return false; |
| } |
| |
| /* Start transmitting 128b/132b TPS2. */ |
| if (!intel_dp_set_link_train(intel_dp, crtc_state, DP_PHY_DPRX, |
| DP_TRAINING_PATTERN_2)) { |
| lt_err(intel_dp, DP_PHY_DPRX, "Failed to start 128b/132b TPS2\n"); |
| return false; |
| } |
| |
| /* Time budget for the LANEx_EQ_DONE Sequence */ |
| deadline = jiffies + msecs_to_jiffies_timeout(400); |
| |
| for (try = 0; try < max_tries; try++) { |
| usleep_range(delay_us, 2 * delay_us); |
| |
| /* |
| * The delay may get updated. The transmitter shall read the |
| * delay before link status during link training. |
| */ |
| delay_us = drm_dp_128b132b_read_aux_rd_interval(&intel_dp->aux); |
| |
| if (drm_dp_dpcd_read_link_status(&intel_dp->aux, link_status) < 0) { |
| lt_err(intel_dp, DP_PHY_DPRX, "Failed to read link status\n"); |
| return false; |
| } |
| |
| if (drm_dp_128b132b_link_training_failed(link_status)) { |
| intel_dp_dump_link_status(intel_dp, DP_PHY_DPRX, link_status); |
| lt_err(intel_dp, DP_PHY_DPRX, |
| "Downstream link training failure\n"); |
| return false; |
| } |
| |
| if (drm_dp_128b132b_lane_channel_eq_done(link_status, crtc_state->lane_count)) { |
| lt_dbg(intel_dp, DP_PHY_DPRX, "Lane channel eq done\n"); |
| break; |
| } |
| |
| if (timeout) { |
| intel_dp_dump_link_status(intel_dp, DP_PHY_DPRX, link_status); |
| lt_err(intel_dp, DP_PHY_DPRX, "Lane channel eq timeout\n"); |
| return false; |
| } |
| |
| if (time_after(jiffies, deadline)) |
| timeout = true; /* try one last time after deadline */ |
| |
| /* Update signal levels and training set as requested. */ |
| intel_dp_get_adjust_train(intel_dp, crtc_state, DP_PHY_DPRX, link_status); |
| if (!intel_dp_update_link_train(intel_dp, crtc_state, DP_PHY_DPRX)) { |
| lt_err(intel_dp, DP_PHY_DPRX, "Failed to update TX FFE settings\n"); |
| return false; |
| } |
| } |
| |
| if (try == max_tries) { |
| intel_dp_dump_link_status(intel_dp, DP_PHY_DPRX, link_status); |
| lt_err(intel_dp, DP_PHY_DPRX, "Max loop count reached\n"); |
| return false; |
| } |
| |
| for (;;) { |
| if (time_after(jiffies, deadline)) |
| timeout = true; /* try one last time after deadline */ |
| |
| if (drm_dp_dpcd_read_link_status(&intel_dp->aux, link_status) < 0) { |
| lt_err(intel_dp, DP_PHY_DPRX, "Failed to read link status\n"); |
| return false; |
| } |
| |
| if (drm_dp_128b132b_link_training_failed(link_status)) { |
| intel_dp_dump_link_status(intel_dp, DP_PHY_DPRX, link_status); |
| lt_err(intel_dp, DP_PHY_DPRX, "Downstream link training failure\n"); |
| return false; |
| } |
| |
| if (drm_dp_128b132b_eq_interlane_align_done(link_status)) { |
| lt_dbg(intel_dp, DP_PHY_DPRX, "Interlane align done\n"); |
| break; |
| } |
| |
| if (timeout) { |
| intel_dp_dump_link_status(intel_dp, DP_PHY_DPRX, link_status); |
| lt_err(intel_dp, DP_PHY_DPRX, "Interlane align timeout\n"); |
| return false; |
| } |
| |
| usleep_range(2000, 3000); |
| } |
| |
| return true; |
| } |
| |
| /* |
| * 128b/132b DP LANEx_CDS_DONE Sequence (DP 2.0 E11 3.5.2.16.2) |
| */ |
| static bool |
| intel_dp_128b132b_lane_cds(struct intel_dp *intel_dp, |
| const struct intel_crtc_state *crtc_state, |
| int lttpr_count) |
| { |
| u8 link_status[DP_LINK_STATUS_SIZE]; |
| unsigned long deadline; |
| |
| if (drm_dp_dpcd_writeb(&intel_dp->aux, DP_TRAINING_PATTERN_SET, |
| DP_TRAINING_PATTERN_2_CDS) != 1) { |
| lt_err(intel_dp, DP_PHY_DPRX, "Failed to start 128b/132b TPS2 CDS\n"); |
| return false; |
| } |
| |
| /* Time budget for the LANEx_CDS_DONE Sequence */ |
| deadline = jiffies + msecs_to_jiffies_timeout((lttpr_count + 1) * 20); |
| |
| for (;;) { |
| bool timeout = false; |
| |
| if (time_after(jiffies, deadline)) |
| timeout = true; /* try one last time after deadline */ |
| |
| usleep_range(2000, 3000); |
| |
| if (drm_dp_dpcd_read_link_status(&intel_dp->aux, link_status) < 0) { |
| lt_err(intel_dp, DP_PHY_DPRX, "Failed to read link status\n"); |
| return false; |
| } |
| |
| if (drm_dp_128b132b_eq_interlane_align_done(link_status) && |
| drm_dp_128b132b_cds_interlane_align_done(link_status) && |
| drm_dp_128b132b_lane_symbol_locked(link_status, crtc_state->lane_count)) { |
| lt_dbg(intel_dp, DP_PHY_DPRX, "CDS interlane align done\n"); |
| break; |
| } |
| |
| if (drm_dp_128b132b_link_training_failed(link_status)) { |
| intel_dp_dump_link_status(intel_dp, DP_PHY_DPRX, link_status); |
| lt_err(intel_dp, DP_PHY_DPRX, "Downstream link training failure\n"); |
| return false; |
| } |
| |
| if (timeout) { |
| intel_dp_dump_link_status(intel_dp, DP_PHY_DPRX, link_status); |
| lt_err(intel_dp, DP_PHY_DPRX, "CDS timeout\n"); |
| return false; |
| } |
| } |
| |
| return true; |
| } |
| |
| /* |
| * 128b/132b link training sequence. (DP 2.0 E11 SCR on link training.) |
| */ |
| static bool |
| intel_dp_128b132b_link_train(struct intel_dp *intel_dp, |
| const struct intel_crtc_state *crtc_state, |
| int lttpr_count) |
| { |
| bool passed = false; |
| |
| if (wait_for(intel_dp_128b132b_intra_hop(intel_dp, crtc_state) == 0, 500)) { |
| lt_err(intel_dp, DP_PHY_DPRX, "128b/132b intra-hop not clear\n"); |
| return false; |
| } |
| |
| if (intel_dp_128b132b_lane_eq(intel_dp, crtc_state) && |
| intel_dp_128b132b_lane_cds(intel_dp, crtc_state, lttpr_count)) |
| passed = true; |
| |
| lt_dbg(intel_dp, DP_PHY_DPRX, |
| "128b/132b Link Training %s at link rate = %d, lane count = %d\n", |
| passed ? "passed" : "failed", |
| crtc_state->port_clock, crtc_state->lane_count); |
| |
| return passed; |
| } |
| |
| /** |
| * intel_dp_start_link_train - start link training |
| * @state: Atomic state |
| * @intel_dp: DP struct |
| * @crtc_state: state for CRTC attached to the encoder |
| * |
| * Start the link training of the @intel_dp port, scheduling a fallback |
| * retraining with reduced link rate/lane parameters if the link training |
| * fails. |
| * After calling this function intel_dp_stop_link_train() must be called. |
| */ |
| void intel_dp_start_link_train(struct intel_atomic_state *state, |
| struct intel_dp *intel_dp, |
| const struct intel_crtc_state *crtc_state) |
| { |
| struct intel_display *display = to_intel_display(state); |
| struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); |
| struct intel_encoder *encoder = &dig_port->base; |
| bool passed; |
| /* |
| * Reinit the LTTPRs here to ensure that they are switched to |
| * non-transparent mode. During an earlier LTTPR detection this |
| * could've been prevented by an active link. |
| */ |
| int lttpr_count = intel_dp_init_lttpr_and_dprx_caps(intel_dp); |
| |
| if (lttpr_count < 0) |
| /* Still continue with enabling the port and link training. */ |
| lttpr_count = 0; |
| |
| intel_dp_prepare_link_train(intel_dp, crtc_state); |
| |
| if (intel_dp_is_uhbr(crtc_state)) |
| passed = intel_dp_128b132b_link_train(intel_dp, crtc_state, lttpr_count); |
| else |
| passed = intel_dp_link_train_all_phys(intel_dp, crtc_state, lttpr_count); |
| |
| if (intel_dp->link.force_train_failure) { |
| intel_dp->link.force_train_failure--; |
| lt_dbg(intel_dp, DP_PHY_DPRX, "Forcing link training failure\n"); |
| } else if (passed) { |
| intel_dp->link.seq_train_failures = 0; |
| intel_encoder_link_check_queue_work(encoder, 2000); |
| return; |
| } |
| |
| intel_dp->link.seq_train_failures++; |
| |
| /* |
| * Ignore the link failure in CI |
| * |
| * In fixed enviroments like CI, sometimes unexpected long HPDs are |
| * generated by the displays. If ignore_long_hpd flag is set, such long |
| * HPDs are ignored. And probably as a consequence of these ignored |
| * long HPDs, subsequent link trainings are failed resulting into CI |
| * execution failures. |
| * |
| * For test cases which rely on the link training or processing of HPDs |
| * ignore_long_hpd flag can unset from the testcase. |
| */ |
| if (display->hotplug.ignore_long_hpd) { |
| lt_dbg(intel_dp, DP_PHY_DPRX, "Ignore the link failure\n"); |
| return; |
| } |
| |
| if (intel_dp->link.seq_train_failures < 2) { |
| intel_encoder_link_check_queue_work(encoder, 0); |
| return; |
| } |
| |
| if (intel_dp_schedule_fallback_link_training(state, intel_dp, crtc_state)) |
| return; |
| |
| intel_dp->link.retrain_disabled = true; |
| |
| if (!passed) |
| lt_err(intel_dp, DP_PHY_DPRX, "Can't reduce link training parameters after failure\n"); |
| else |
| lt_dbg(intel_dp, DP_PHY_DPRX, "Can't reduce link training parameters after forced failure\n"); |
| } |
| |
| void intel_dp_128b132b_sdp_crc16(struct intel_dp *intel_dp, |
| const struct intel_crtc_state *crtc_state) |
| { |
| /* |
| * VIDEO_DIP_CTL register bit 31 should be set to '0' to not |
| * disable SDP CRC. This is applicable for Display version 13. |
| * Default value of bit 31 is '0' hence discarding the write |
| * TODO: Corrective actions on SDP corruption yet to be defined |
| */ |
| if (!intel_dp_is_uhbr(crtc_state)) |
| return; |
| |
| /* DP v2.0 SCR on SDP CRC16 for 128b/132b Link Layer */ |
| drm_dp_dpcd_writeb(&intel_dp->aux, |
| DP_SDP_ERROR_DETECTION_CONFIGURATION, |
| DP_SDP_CRC16_128B132B_EN); |
| |
| lt_dbg(intel_dp, DP_PHY_DPRX, "DP2.0 SDP CRC16 for 128b/132b enabled\n"); |
| } |
| |
| static struct intel_dp *intel_connector_to_intel_dp(struct intel_connector *connector) |
| { |
| if (connector->mst_port) |
| return connector->mst_port; |
| else |
| return enc_to_intel_dp(intel_attached_encoder(connector)); |
| } |
| |
| static int i915_dp_force_link_rate_show(struct seq_file *m, void *data) |
| { |
| struct intel_connector *connector = to_intel_connector(m->private); |
| struct intel_display *display = to_intel_display(connector); |
| struct intel_dp *intel_dp = intel_connector_to_intel_dp(connector); |
| int current_rate = -1; |
| int force_rate; |
| int err; |
| int i; |
| |
| err = drm_modeset_lock_single_interruptible(&display->drm->mode_config.connection_mutex); |
| if (err) |
| return err; |
| |
| if (intel_dp->link_trained) |
| current_rate = intel_dp->link_rate; |
| force_rate = intel_dp->link.force_rate; |
| |
| drm_modeset_unlock(&display->drm->mode_config.connection_mutex); |
| |
| seq_printf(m, "%sauto%s", |
| force_rate == 0 ? "[" : "", |
| force_rate == 0 ? "]" : ""); |
| |
| for (i = 0; i < intel_dp->num_source_rates; i++) |
| seq_printf(m, " %s%d%s%s", |
| intel_dp->source_rates[i] == force_rate ? "[" : "", |
| intel_dp->source_rates[i], |
| intel_dp->source_rates[i] == current_rate ? "*" : "", |
| intel_dp->source_rates[i] == force_rate ? "]" : ""); |
| |
| seq_putc(m, '\n'); |
| |
| return 0; |
| } |
| |
| static int parse_link_rate(struct intel_dp *intel_dp, const char __user *ubuf, size_t len) |
| { |
| char *kbuf; |
| const char *p; |
| int rate; |
| int ret = 0; |
| |
| kbuf = memdup_user_nul(ubuf, len); |
| if (IS_ERR(kbuf)) |
| return PTR_ERR(kbuf); |
| |
| p = strim(kbuf); |
| |
| if (!strcmp(p, "auto")) { |
| rate = 0; |
| } else { |
| ret = kstrtoint(p, 0, &rate); |
| if (ret < 0) |
| goto out_free; |
| |
| if (intel_dp_rate_index(intel_dp->source_rates, |
| intel_dp->num_source_rates, |
| rate) < 0) |
| ret = -EINVAL; |
| } |
| |
| out_free: |
| kfree(kbuf); |
| |
| return ret < 0 ? ret : rate; |
| } |
| |
| static ssize_t i915_dp_force_link_rate_write(struct file *file, |
| const char __user *ubuf, |
| size_t len, loff_t *offp) |
| { |
| struct seq_file *m = file->private_data; |
| struct intel_connector *connector = to_intel_connector(m->private); |
| struct intel_display *display = to_intel_display(connector); |
| struct intel_dp *intel_dp = intel_connector_to_intel_dp(connector); |
| int rate; |
| int err; |
| |
| rate = parse_link_rate(intel_dp, ubuf, len); |
| if (rate < 0) |
| return rate; |
| |
| err = drm_modeset_lock_single_interruptible(&display->drm->mode_config.connection_mutex); |
| if (err) |
| return err; |
| |
| intel_dp_reset_link_params(intel_dp); |
| intel_dp->link.force_rate = rate; |
| |
| drm_modeset_unlock(&display->drm->mode_config.connection_mutex); |
| |
| *offp += len; |
| |
| return len; |
| } |
| DEFINE_SHOW_STORE_ATTRIBUTE(i915_dp_force_link_rate); |
| |
| static int i915_dp_force_lane_count_show(struct seq_file *m, void *data) |
| { |
| struct intel_connector *connector = to_intel_connector(m->private); |
| struct intel_display *display = to_intel_display(connector); |
| struct intel_dp *intel_dp = intel_connector_to_intel_dp(connector); |
| int current_lane_count = -1; |
| int force_lane_count; |
| int err; |
| int i; |
| |
| err = drm_modeset_lock_single_interruptible(&display->drm->mode_config.connection_mutex); |
| if (err) |
| return err; |
| |
| if (intel_dp->link_trained) |
| current_lane_count = intel_dp->lane_count; |
| force_lane_count = intel_dp->link.force_lane_count; |
| |
| drm_modeset_unlock(&display->drm->mode_config.connection_mutex); |
| |
| seq_printf(m, "%sauto%s", |
| force_lane_count == 0 ? "[" : "", |
| force_lane_count == 0 ? "]" : ""); |
| |
| for (i = 1; i <= 4; i <<= 1) |
| seq_printf(m, " %s%d%s%s", |
| i == force_lane_count ? "[" : "", |
| i, |
| i == current_lane_count ? "*" : "", |
| i == force_lane_count ? "]" : ""); |
| |
| seq_putc(m, '\n'); |
| |
| return 0; |
| } |
| |
| static int parse_lane_count(const char __user *ubuf, size_t len) |
| { |
| char *kbuf; |
| const char *p; |
| int lane_count; |
| int ret = 0; |
| |
| kbuf = memdup_user_nul(ubuf, len); |
| if (IS_ERR(kbuf)) |
| return PTR_ERR(kbuf); |
| |
| p = strim(kbuf); |
| |
| if (!strcmp(p, "auto")) { |
| lane_count = 0; |
| } else { |
| ret = kstrtoint(p, 0, &lane_count); |
| if (ret < 0) |
| goto out_free; |
| |
| switch (lane_count) { |
| case 1: |
| case 2: |
| case 4: |
| break; |
| default: |
| ret = -EINVAL; |
| } |
| } |
| |
| out_free: |
| kfree(kbuf); |
| |
| return ret < 0 ? ret : lane_count; |
| } |
| |
| static ssize_t i915_dp_force_lane_count_write(struct file *file, |
| const char __user *ubuf, |
| size_t len, loff_t *offp) |
| { |
| struct seq_file *m = file->private_data; |
| struct intel_connector *connector = to_intel_connector(m->private); |
| struct intel_display *display = to_intel_display(connector); |
| struct intel_dp *intel_dp = intel_connector_to_intel_dp(connector); |
| int lane_count; |
| int err; |
| |
| lane_count = parse_lane_count(ubuf, len); |
| if (lane_count < 0) |
| return lane_count; |
| |
| err = drm_modeset_lock_single_interruptible(&display->drm->mode_config.connection_mutex); |
| if (err) |
| return err; |
| |
| intel_dp_reset_link_params(intel_dp); |
| intel_dp->link.force_lane_count = lane_count; |
| |
| drm_modeset_unlock(&display->drm->mode_config.connection_mutex); |
| |
| *offp += len; |
| |
| return len; |
| } |
| DEFINE_SHOW_STORE_ATTRIBUTE(i915_dp_force_lane_count); |
| |
| static int i915_dp_max_link_rate_show(void *data, u64 *val) |
| { |
| struct intel_connector *connector = to_intel_connector(data); |
| struct intel_display *display = to_intel_display(connector); |
| struct intel_dp *intel_dp = intel_connector_to_intel_dp(connector); |
| int err; |
| |
| err = drm_modeset_lock_single_interruptible(&display->drm->mode_config.connection_mutex); |
| if (err) |
| return err; |
| |
| *val = intel_dp->link.max_rate; |
| |
| drm_modeset_unlock(&display->drm->mode_config.connection_mutex); |
| |
| return 0; |
| } |
| DEFINE_DEBUGFS_ATTRIBUTE(i915_dp_max_link_rate_fops, i915_dp_max_link_rate_show, NULL, "%llu\n"); |
| |
| static int i915_dp_max_lane_count_show(void *data, u64 *val) |
| { |
| struct intel_connector *connector = to_intel_connector(data); |
| struct intel_display *display = to_intel_display(connector); |
| struct intel_dp *intel_dp = intel_connector_to_intel_dp(connector); |
| int err; |
| |
| err = drm_modeset_lock_single_interruptible(&display->drm->mode_config.connection_mutex); |
| if (err) |
| return err; |
| |
| *val = intel_dp->link.max_lane_count; |
| |
| drm_modeset_unlock(&display->drm->mode_config.connection_mutex); |
| |
| return 0; |
| } |
| DEFINE_DEBUGFS_ATTRIBUTE(i915_dp_max_lane_count_fops, i915_dp_max_lane_count_show, NULL, "%llu\n"); |
| |
| static int i915_dp_force_link_training_failure_show(void *data, u64 *val) |
| { |
| struct intel_connector *connector = to_intel_connector(data); |
| struct intel_display *display = to_intel_display(connector); |
| struct intel_dp *intel_dp = intel_connector_to_intel_dp(connector); |
| int err; |
| |
| err = drm_modeset_lock_single_interruptible(&display->drm->mode_config.connection_mutex); |
| if (err) |
| return err; |
| |
| *val = intel_dp->link.force_train_failure; |
| |
| drm_modeset_unlock(&display->drm->mode_config.connection_mutex); |
| |
| return 0; |
| } |
| |
| static int i915_dp_force_link_training_failure_write(void *data, u64 val) |
| { |
| struct intel_connector *connector = to_intel_connector(data); |
| struct intel_display *display = to_intel_display(connector); |
| struct intel_dp *intel_dp = intel_connector_to_intel_dp(connector); |
| int err; |
| |
| if (val > 2) |
| return -EINVAL; |
| |
| err = drm_modeset_lock_single_interruptible(&display->drm->mode_config.connection_mutex); |
| if (err) |
| return err; |
| |
| intel_dp->link.force_train_failure = val; |
| |
| drm_modeset_unlock(&display->drm->mode_config.connection_mutex); |
| |
| return 0; |
| } |
| DEFINE_DEBUGFS_ATTRIBUTE(i915_dp_force_link_training_failure_fops, |
| i915_dp_force_link_training_failure_show, |
| i915_dp_force_link_training_failure_write, "%llu\n"); |
| |
| static int i915_dp_force_link_retrain_show(void *data, u64 *val) |
| { |
| struct intel_connector *connector = to_intel_connector(data); |
| struct intel_display *display = to_intel_display(connector); |
| struct intel_dp *intel_dp = intel_connector_to_intel_dp(connector); |
| int err; |
| |
| err = drm_modeset_lock_single_interruptible(&display->drm->mode_config.connection_mutex); |
| if (err) |
| return err; |
| |
| *val = intel_dp->link.force_retrain; |
| |
| drm_modeset_unlock(&display->drm->mode_config.connection_mutex); |
| |
| return 0; |
| } |
| |
| static int i915_dp_force_link_retrain_write(void *data, u64 val) |
| { |
| struct intel_connector *connector = to_intel_connector(data); |
| struct intel_display *display = to_intel_display(connector); |
| struct intel_dp *intel_dp = intel_connector_to_intel_dp(connector); |
| int err; |
| |
| err = drm_modeset_lock_single_interruptible(&display->drm->mode_config.connection_mutex); |
| if (err) |
| return err; |
| |
| intel_dp->link.force_retrain = val; |
| |
| drm_modeset_unlock(&display->drm->mode_config.connection_mutex); |
| |
| intel_hpd_trigger_irq(dp_to_dig_port(intel_dp)); |
| |
| return 0; |
| } |
| DEFINE_DEBUGFS_ATTRIBUTE(i915_dp_force_link_retrain_fops, |
| i915_dp_force_link_retrain_show, |
| i915_dp_force_link_retrain_write, "%llu\n"); |
| |
| static int i915_dp_link_retrain_disabled_show(struct seq_file *m, void *data) |
| { |
| struct intel_connector *connector = to_intel_connector(m->private); |
| struct intel_display *display = to_intel_display(connector); |
| struct intel_dp *intel_dp = intel_connector_to_intel_dp(connector); |
| int err; |
| |
| err = drm_modeset_lock_single_interruptible(&display->drm->mode_config.connection_mutex); |
| if (err) |
| return err; |
| |
| seq_printf(m, "%s\n", str_yes_no(intel_dp->link.retrain_disabled)); |
| |
| drm_modeset_unlock(&display->drm->mode_config.connection_mutex); |
| |
| return 0; |
| } |
| DEFINE_SHOW_ATTRIBUTE(i915_dp_link_retrain_disabled); |
| |
| void intel_dp_link_training_debugfs_add(struct intel_connector *connector) |
| { |
| struct dentry *root = connector->base.debugfs_entry; |
| |
| if (connector->base.connector_type != DRM_MODE_CONNECTOR_DisplayPort && |
| connector->base.connector_type != DRM_MODE_CONNECTOR_eDP) |
| return; |
| |
| debugfs_create_file("i915_dp_force_link_rate", 0644, root, |
| connector, &i915_dp_force_link_rate_fops); |
| |
| debugfs_create_file("i915_dp_force_lane_count", 0644, root, |
| connector, &i915_dp_force_lane_count_fops); |
| |
| debugfs_create_file("i915_dp_max_link_rate", 0444, root, |
| connector, &i915_dp_max_link_rate_fops); |
| |
| debugfs_create_file("i915_dp_max_lane_count", 0444, root, |
| connector, &i915_dp_max_lane_count_fops); |
| |
| debugfs_create_file("i915_dp_force_link_training_failure", 0644, root, |
| connector, &i915_dp_force_link_training_failure_fops); |
| |
| debugfs_create_file("i915_dp_force_link_retrain", 0644, root, |
| connector, &i915_dp_force_link_retrain_fops); |
| |
| debugfs_create_file("i915_dp_link_retrain_disabled", 0444, root, |
| connector, &i915_dp_link_retrain_disabled_fops); |
| } |