| // SPDX-License-Identifier: MIT |
| /* |
| * Copyright © 2022 Intel Corporation |
| */ |
| |
| #include <drm/drm_blend.h> |
| |
| #include "i915_drv.h" |
| #include "i915_reg.h" |
| #include "i9xx_wm.h" |
| #include "intel_atomic.h" |
| #include "intel_atomic_plane.h" |
| #include "intel_bw.h" |
| #include "intel_cdclk.h" |
| #include "intel_crtc.h" |
| #include "intel_cursor_regs.h" |
| #include "intel_de.h" |
| #include "intel_display.h" |
| #include "intel_display_power.h" |
| #include "intel_display_types.h" |
| #include "intel_fb.h" |
| #include "intel_fixed.h" |
| #include "intel_pcode.h" |
| #include "intel_wm.h" |
| #include "skl_universal_plane_regs.h" |
| #include "skl_watermark.h" |
| #include "skl_watermark_regs.h" |
| |
| /*It is expected that DSB can do posted writes to every register in |
| * the pipe and planes within 100us. For flip queue use case, the |
| * recommended DSB execution time is 100us + one SAGV block time. |
| */ |
| #define DSB_EXE_TIME 100 |
| |
| static void skl_sagv_disable(struct drm_i915_private *i915); |
| |
| /* Stores plane specific WM parameters */ |
| struct skl_wm_params { |
| bool x_tiled, y_tiled; |
| bool rc_surface; |
| bool is_planar; |
| u32 width; |
| u8 cpp; |
| u32 plane_pixel_rate; |
| u32 y_min_scanlines; |
| u32 plane_bytes_per_line; |
| uint_fixed_16_16_t plane_blocks_per_line; |
| uint_fixed_16_16_t y_tile_minimum; |
| u32 linetime_us; |
| u32 dbuf_block_size; |
| }; |
| |
| u8 intel_enabled_dbuf_slices_mask(struct drm_i915_private *i915) |
| { |
| u8 enabled_slices = 0; |
| enum dbuf_slice slice; |
| |
| for_each_dbuf_slice(i915, slice) { |
| if (intel_de_read(i915, DBUF_CTL_S(slice)) & DBUF_POWER_STATE) |
| enabled_slices |= BIT(slice); |
| } |
| |
| return enabled_slices; |
| } |
| |
| /* |
| * FIXME: We still don't have the proper code detect if we need to apply the WA, |
| * so assume we'll always need it in order to avoid underruns. |
| */ |
| static bool skl_needs_memory_bw_wa(struct drm_i915_private *i915) |
| { |
| return DISPLAY_VER(i915) == 9; |
| } |
| |
| bool |
| intel_has_sagv(struct drm_i915_private *i915) |
| { |
| return HAS_SAGV(i915) && |
| i915->display.sagv.status != I915_SAGV_NOT_CONTROLLED; |
| } |
| |
| static u32 |
| intel_sagv_block_time(struct drm_i915_private *i915) |
| { |
| if (DISPLAY_VER(i915) >= 14) { |
| u32 val; |
| |
| val = intel_de_read(i915, MTL_LATENCY_SAGV); |
| |
| return REG_FIELD_GET(MTL_LATENCY_QCLK_SAGV, val); |
| } else if (DISPLAY_VER(i915) >= 12) { |
| u32 val = 0; |
| int ret; |
| |
| ret = snb_pcode_read(&i915->uncore, |
| GEN12_PCODE_READ_SAGV_BLOCK_TIME_US, |
| &val, NULL); |
| if (ret) { |
| drm_dbg_kms(&i915->drm, "Couldn't read SAGV block time!\n"); |
| return 0; |
| } |
| |
| return val; |
| } else if (DISPLAY_VER(i915) == 11) { |
| return 10; |
| } else if (HAS_SAGV(i915)) { |
| return 30; |
| } else { |
| return 0; |
| } |
| } |
| |
| static void intel_sagv_init(struct drm_i915_private *i915) |
| { |
| if (!HAS_SAGV(i915)) |
| i915->display.sagv.status = I915_SAGV_NOT_CONTROLLED; |
| |
| /* |
| * Probe to see if we have working SAGV control. |
| * For icl+ this was already determined by intel_bw_init_hw(). |
| */ |
| if (DISPLAY_VER(i915) < 11) |
| skl_sagv_disable(i915); |
| |
| drm_WARN_ON(&i915->drm, i915->display.sagv.status == I915_SAGV_UNKNOWN); |
| |
| i915->display.sagv.block_time_us = intel_sagv_block_time(i915); |
| |
| drm_dbg_kms(&i915->drm, "SAGV supported: %s, original SAGV block time: %u us\n", |
| str_yes_no(intel_has_sagv(i915)), i915->display.sagv.block_time_us); |
| |
| /* avoid overflow when adding with wm0 latency/etc. */ |
| if (drm_WARN(&i915->drm, i915->display.sagv.block_time_us > U16_MAX, |
| "Excessive SAGV block time %u, ignoring\n", |
| i915->display.sagv.block_time_us)) |
| i915->display.sagv.block_time_us = 0; |
| |
| if (!intel_has_sagv(i915)) |
| i915->display.sagv.block_time_us = 0; |
| } |
| |
| /* |
| * SAGV dynamically adjusts the system agent voltage and clock frequencies |
| * depending on power and performance requirements. The display engine access |
| * to system memory is blocked during the adjustment time. Because of the |
| * blocking time, having this enabled can cause full system hangs and/or pipe |
| * underruns if we don't meet all of the following requirements: |
| * |
| * - <= 1 pipe enabled |
| * - All planes can enable watermarks for latencies >= SAGV engine block time |
| * - We're not using an interlaced display configuration |
| */ |
| static void skl_sagv_enable(struct drm_i915_private *i915) |
| { |
| int ret; |
| |
| if (!intel_has_sagv(i915)) |
| return; |
| |
| if (i915->display.sagv.status == I915_SAGV_ENABLED) |
| return; |
| |
| drm_dbg_kms(&i915->drm, "Enabling SAGV\n"); |
| ret = snb_pcode_write(&i915->uncore, GEN9_PCODE_SAGV_CONTROL, |
| GEN9_SAGV_ENABLE); |
| |
| /* We don't need to wait for SAGV when enabling */ |
| |
| /* |
| * Some skl systems, pre-release machines in particular, |
| * don't actually have SAGV. |
| */ |
| if (IS_SKYLAKE(i915) && ret == -ENXIO) { |
| drm_dbg(&i915->drm, "No SAGV found on system, ignoring\n"); |
| i915->display.sagv.status = I915_SAGV_NOT_CONTROLLED; |
| return; |
| } else if (ret < 0) { |
| drm_err(&i915->drm, "Failed to enable SAGV\n"); |
| return; |
| } |
| |
| i915->display.sagv.status = I915_SAGV_ENABLED; |
| } |
| |
| static void skl_sagv_disable(struct drm_i915_private *i915) |
| { |
| int ret; |
| |
| if (!intel_has_sagv(i915)) |
| return; |
| |
| if (i915->display.sagv.status == I915_SAGV_DISABLED) |
| return; |
| |
| drm_dbg_kms(&i915->drm, "Disabling SAGV\n"); |
| /* bspec says to keep retrying for at least 1 ms */ |
| ret = skl_pcode_request(&i915->uncore, GEN9_PCODE_SAGV_CONTROL, |
| GEN9_SAGV_DISABLE, |
| GEN9_SAGV_IS_DISABLED, GEN9_SAGV_IS_DISABLED, |
| 1); |
| /* |
| * Some skl systems, pre-release machines in particular, |
| * don't actually have SAGV. |
| */ |
| if (IS_SKYLAKE(i915) && ret == -ENXIO) { |
| drm_dbg(&i915->drm, "No SAGV found on system, ignoring\n"); |
| i915->display.sagv.status = I915_SAGV_NOT_CONTROLLED; |
| return; |
| } else if (ret < 0) { |
| drm_err(&i915->drm, "Failed to disable SAGV (%d)\n", ret); |
| return; |
| } |
| |
| i915->display.sagv.status = I915_SAGV_DISABLED; |
| } |
| |
| static void skl_sagv_pre_plane_update(struct intel_atomic_state *state) |
| { |
| struct drm_i915_private *i915 = to_i915(state->base.dev); |
| const struct intel_bw_state *new_bw_state = |
| intel_atomic_get_new_bw_state(state); |
| |
| if (!new_bw_state) |
| return; |
| |
| if (!intel_can_enable_sagv(i915, new_bw_state)) |
| skl_sagv_disable(i915); |
| } |
| |
| static void skl_sagv_post_plane_update(struct intel_atomic_state *state) |
| { |
| struct drm_i915_private *i915 = to_i915(state->base.dev); |
| const struct intel_bw_state *new_bw_state = |
| intel_atomic_get_new_bw_state(state); |
| |
| if (!new_bw_state) |
| return; |
| |
| if (intel_can_enable_sagv(i915, new_bw_state)) |
| skl_sagv_enable(i915); |
| } |
| |
| static void icl_sagv_pre_plane_update(struct intel_atomic_state *state) |
| { |
| struct drm_i915_private *i915 = to_i915(state->base.dev); |
| const struct intel_bw_state *old_bw_state = |
| intel_atomic_get_old_bw_state(state); |
| const struct intel_bw_state *new_bw_state = |
| intel_atomic_get_new_bw_state(state); |
| u16 old_mask, new_mask; |
| |
| if (!new_bw_state) |
| return; |
| |
| old_mask = old_bw_state->qgv_points_mask; |
| new_mask = old_bw_state->qgv_points_mask | new_bw_state->qgv_points_mask; |
| |
| if (old_mask == new_mask) |
| return; |
| |
| WARN_ON(!new_bw_state->base.changed); |
| |
| drm_dbg_kms(&i915->drm, "Restricting QGV points: 0x%x -> 0x%x\n", |
| old_mask, new_mask); |
| |
| /* |
| * Restrict required qgv points before updating the configuration. |
| * According to BSpec we can't mask and unmask qgv points at the same |
| * time. Also masking should be done before updating the configuration |
| * and unmasking afterwards. |
| */ |
| icl_pcode_restrict_qgv_points(i915, new_mask); |
| } |
| |
| static void icl_sagv_post_plane_update(struct intel_atomic_state *state) |
| { |
| struct drm_i915_private *i915 = to_i915(state->base.dev); |
| const struct intel_bw_state *old_bw_state = |
| intel_atomic_get_old_bw_state(state); |
| const struct intel_bw_state *new_bw_state = |
| intel_atomic_get_new_bw_state(state); |
| u16 old_mask, new_mask; |
| |
| if (!new_bw_state) |
| return; |
| |
| old_mask = old_bw_state->qgv_points_mask | new_bw_state->qgv_points_mask; |
| new_mask = new_bw_state->qgv_points_mask; |
| |
| if (old_mask == new_mask) |
| return; |
| |
| WARN_ON(!new_bw_state->base.changed); |
| |
| drm_dbg_kms(&i915->drm, "Relaxing QGV points: 0x%x -> 0x%x\n", |
| old_mask, new_mask); |
| |
| /* |
| * Allow required qgv points after updating the configuration. |
| * According to BSpec we can't mask and unmask qgv points at the same |
| * time. Also masking should be done before updating the configuration |
| * and unmasking afterwards. |
| */ |
| icl_pcode_restrict_qgv_points(i915, new_mask); |
| } |
| |
| void intel_sagv_pre_plane_update(struct intel_atomic_state *state) |
| { |
| struct drm_i915_private *i915 = to_i915(state->base.dev); |
| |
| /* |
| * Just return if we can't control SAGV or don't have it. |
| * This is different from situation when we have SAGV but just can't |
| * afford it due to DBuf limitation - in case if SAGV is completely |
| * disabled in a BIOS, we are not even allowed to send a PCode request, |
| * as it will throw an error. So have to check it here. |
| */ |
| if (!intel_has_sagv(i915)) |
| return; |
| |
| if (DISPLAY_VER(i915) >= 11) |
| icl_sagv_pre_plane_update(state); |
| else |
| skl_sagv_pre_plane_update(state); |
| } |
| |
| void intel_sagv_post_plane_update(struct intel_atomic_state *state) |
| { |
| struct drm_i915_private *i915 = to_i915(state->base.dev); |
| |
| /* |
| * Just return if we can't control SAGV or don't have it. |
| * This is different from situation when we have SAGV but just can't |
| * afford it due to DBuf limitation - in case if SAGV is completely |
| * disabled in a BIOS, we are not even allowed to send a PCode request, |
| * as it will throw an error. So have to check it here. |
| */ |
| if (!intel_has_sagv(i915)) |
| return; |
| |
| if (DISPLAY_VER(i915) >= 11) |
| icl_sagv_post_plane_update(state); |
| else |
| skl_sagv_post_plane_update(state); |
| } |
| |
| static bool skl_crtc_can_enable_sagv(const struct intel_crtc_state *crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| struct drm_i915_private *i915 = to_i915(crtc->base.dev); |
| enum plane_id plane_id; |
| int max_level = INT_MAX; |
| |
| if (!intel_has_sagv(i915)) |
| return false; |
| |
| if (!crtc_state->hw.active) |
| return true; |
| |
| if (crtc_state->hw.pipe_mode.flags & DRM_MODE_FLAG_INTERLACE) |
| return false; |
| |
| for_each_plane_id_on_crtc(crtc, plane_id) { |
| const struct skl_plane_wm *wm = |
| &crtc_state->wm.skl.optimal.planes[plane_id]; |
| int level; |
| |
| /* Skip this plane if it's not enabled */ |
| if (!wm->wm[0].enable) |
| continue; |
| |
| /* Find the highest enabled wm level for this plane */ |
| for (level = i915->display.wm.num_levels - 1; |
| !wm->wm[level].enable; --level) |
| { } |
| |
| /* Highest common enabled wm level for all planes */ |
| max_level = min(level, max_level); |
| } |
| |
| /* No enabled planes? */ |
| if (max_level == INT_MAX) |
| return true; |
| |
| for_each_plane_id_on_crtc(crtc, plane_id) { |
| const struct skl_plane_wm *wm = |
| &crtc_state->wm.skl.optimal.planes[plane_id]; |
| |
| /* |
| * All enabled planes must have enabled a common wm level that |
| * can tolerate memory latencies higher than sagv_block_time_us |
| */ |
| if (wm->wm[0].enable && !wm->wm[max_level].can_sagv) |
| return false; |
| } |
| |
| return true; |
| } |
| |
| static bool tgl_crtc_can_enable_sagv(const struct intel_crtc_state *crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| enum plane_id plane_id; |
| |
| if (!crtc_state->hw.active) |
| return true; |
| |
| for_each_plane_id_on_crtc(crtc, plane_id) { |
| const struct skl_plane_wm *wm = |
| &crtc_state->wm.skl.optimal.planes[plane_id]; |
| |
| if (wm->wm[0].enable && !wm->sagv.wm0.enable) |
| return false; |
| } |
| |
| return true; |
| } |
| |
| static bool intel_crtc_can_enable_sagv(const struct intel_crtc_state *crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| struct drm_i915_private *i915 = to_i915(crtc->base.dev); |
| |
| if (!i915->display.params.enable_sagv) |
| return false; |
| |
| if (DISPLAY_VER(i915) >= 12) |
| return tgl_crtc_can_enable_sagv(crtc_state); |
| else |
| return skl_crtc_can_enable_sagv(crtc_state); |
| } |
| |
| bool intel_can_enable_sagv(struct drm_i915_private *i915, |
| const struct intel_bw_state *bw_state) |
| { |
| if (DISPLAY_VER(i915) < 11 && |
| bw_state->active_pipes && !is_power_of_2(bw_state->active_pipes)) |
| return false; |
| |
| return bw_state->pipe_sagv_reject == 0; |
| } |
| |
| static int intel_compute_sagv_mask(struct intel_atomic_state *state) |
| { |
| struct drm_i915_private *i915 = to_i915(state->base.dev); |
| int ret; |
| struct intel_crtc *crtc; |
| struct intel_crtc_state *new_crtc_state; |
| struct intel_bw_state *new_bw_state = NULL; |
| const struct intel_bw_state *old_bw_state = NULL; |
| int i; |
| |
| for_each_new_intel_crtc_in_state(state, crtc, |
| new_crtc_state, i) { |
| struct skl_pipe_wm *pipe_wm = &new_crtc_state->wm.skl.optimal; |
| |
| new_bw_state = intel_atomic_get_bw_state(state); |
| if (IS_ERR(new_bw_state)) |
| return PTR_ERR(new_bw_state); |
| |
| old_bw_state = intel_atomic_get_old_bw_state(state); |
| |
| /* |
| * We store use_sagv_wm in the crtc state rather than relying on |
| * that bw state since we have no convenient way to get at the |
| * latter from the plane commit hooks (especially in the legacy |
| * cursor case). |
| * |
| * drm_atomic_check_only() gets upset if we pull more crtcs |
| * into the state, so we have to calculate this based on the |
| * individual intel_crtc_can_enable_sagv() rather than |
| * the overall intel_can_enable_sagv(). Otherwise the |
| * crtcs not included in the commit would not switch to the |
| * SAGV watermarks when we are about to enable SAGV, and that |
| * would lead to underruns. This does mean extra power draw |
| * when only a subset of the crtcs are blocking SAGV as the |
| * other crtcs can't be allowed to use the more optimal |
| * normal (ie. non-SAGV) watermarks. |
| */ |
| pipe_wm->use_sagv_wm = !HAS_HW_SAGV_WM(i915) && |
| DISPLAY_VER(i915) >= 12 && |
| intel_crtc_can_enable_sagv(new_crtc_state); |
| |
| if (intel_crtc_can_enable_sagv(new_crtc_state)) |
| new_bw_state->pipe_sagv_reject &= ~BIT(crtc->pipe); |
| else |
| new_bw_state->pipe_sagv_reject |= BIT(crtc->pipe); |
| } |
| |
| if (!new_bw_state) |
| return 0; |
| |
| new_bw_state->active_pipes = |
| intel_calc_active_pipes(state, old_bw_state->active_pipes); |
| |
| if (new_bw_state->active_pipes != old_bw_state->active_pipes) { |
| ret = intel_atomic_lock_global_state(&new_bw_state->base); |
| if (ret) |
| return ret; |
| } |
| |
| if (intel_can_enable_sagv(i915, new_bw_state) != |
| intel_can_enable_sagv(i915, old_bw_state)) { |
| ret = intel_atomic_serialize_global_state(&new_bw_state->base); |
| if (ret) |
| return ret; |
| } else if (new_bw_state->pipe_sagv_reject != old_bw_state->pipe_sagv_reject) { |
| ret = intel_atomic_lock_global_state(&new_bw_state->base); |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static u16 skl_ddb_entry_init(struct skl_ddb_entry *entry, |
| u16 start, u16 end) |
| { |
| entry->start = start; |
| entry->end = end; |
| |
| return end; |
| } |
| |
| static int intel_dbuf_slice_size(struct drm_i915_private *i915) |
| { |
| return DISPLAY_INFO(i915)->dbuf.size / |
| hweight8(DISPLAY_INFO(i915)->dbuf.slice_mask); |
| } |
| |
| static void |
| skl_ddb_entry_for_slices(struct drm_i915_private *i915, u8 slice_mask, |
| struct skl_ddb_entry *ddb) |
| { |
| int slice_size = intel_dbuf_slice_size(i915); |
| |
| if (!slice_mask) { |
| ddb->start = 0; |
| ddb->end = 0; |
| return; |
| } |
| |
| ddb->start = (ffs(slice_mask) - 1) * slice_size; |
| ddb->end = fls(slice_mask) * slice_size; |
| |
| WARN_ON(ddb->start >= ddb->end); |
| WARN_ON(ddb->end > DISPLAY_INFO(i915)->dbuf.size); |
| } |
| |
| static unsigned int mbus_ddb_offset(struct drm_i915_private *i915, u8 slice_mask) |
| { |
| struct skl_ddb_entry ddb; |
| |
| if (slice_mask & (BIT(DBUF_S1) | BIT(DBUF_S2))) |
| slice_mask = BIT(DBUF_S1); |
| else if (slice_mask & (BIT(DBUF_S3) | BIT(DBUF_S4))) |
| slice_mask = BIT(DBUF_S3); |
| |
| skl_ddb_entry_for_slices(i915, slice_mask, &ddb); |
| |
| return ddb.start; |
| } |
| |
| u32 skl_ddb_dbuf_slice_mask(struct drm_i915_private *i915, |
| const struct skl_ddb_entry *entry) |
| { |
| int slice_size = intel_dbuf_slice_size(i915); |
| enum dbuf_slice start_slice, end_slice; |
| u8 slice_mask = 0; |
| |
| if (!skl_ddb_entry_size(entry)) |
| return 0; |
| |
| start_slice = entry->start / slice_size; |
| end_slice = (entry->end - 1) / slice_size; |
| |
| /* |
| * Per plane DDB entry can in a really worst case be on multiple slices |
| * but single entry is anyway contigious. |
| */ |
| while (start_slice <= end_slice) { |
| slice_mask |= BIT(start_slice); |
| start_slice++; |
| } |
| |
| return slice_mask; |
| } |
| |
| static unsigned int intel_crtc_ddb_weight(const struct intel_crtc_state *crtc_state) |
| { |
| const struct drm_display_mode *pipe_mode = &crtc_state->hw.pipe_mode; |
| int hdisplay, vdisplay; |
| |
| if (!crtc_state->hw.active) |
| return 0; |
| |
| /* |
| * Watermark/ddb requirement highly depends upon width of the |
| * framebuffer, So instead of allocating DDB equally among pipes |
| * distribute DDB based on resolution/width of the display. |
| */ |
| drm_mode_get_hv_timing(pipe_mode, &hdisplay, &vdisplay); |
| |
| return hdisplay; |
| } |
| |
| static void intel_crtc_dbuf_weights(const struct intel_dbuf_state *dbuf_state, |
| enum pipe for_pipe, |
| unsigned int *weight_start, |
| unsigned int *weight_end, |
| unsigned int *weight_total) |
| { |
| struct drm_i915_private *i915 = |
| to_i915(dbuf_state->base.state->base.dev); |
| enum pipe pipe; |
| |
| *weight_start = 0; |
| *weight_end = 0; |
| *weight_total = 0; |
| |
| for_each_pipe(i915, pipe) { |
| int weight = dbuf_state->weight[pipe]; |
| |
| /* |
| * Do not account pipes using other slice sets |
| * luckily as of current BSpec slice sets do not partially |
| * intersect(pipes share either same one slice or same slice set |
| * i.e no partial intersection), so it is enough to check for |
| * equality for now. |
| */ |
| if (dbuf_state->slices[pipe] != dbuf_state->slices[for_pipe]) |
| continue; |
| |
| *weight_total += weight; |
| if (pipe < for_pipe) { |
| *weight_start += weight; |
| *weight_end += weight; |
| } else if (pipe == for_pipe) { |
| *weight_end += weight; |
| } |
| } |
| } |
| |
| static int |
| skl_crtc_allocate_ddb(struct intel_atomic_state *state, struct intel_crtc *crtc) |
| { |
| struct drm_i915_private *i915 = to_i915(crtc->base.dev); |
| unsigned int weight_total, weight_start, weight_end; |
| const struct intel_dbuf_state *old_dbuf_state = |
| intel_atomic_get_old_dbuf_state(state); |
| struct intel_dbuf_state *new_dbuf_state = |
| intel_atomic_get_new_dbuf_state(state); |
| struct intel_crtc_state *crtc_state; |
| struct skl_ddb_entry ddb_slices; |
| enum pipe pipe = crtc->pipe; |
| unsigned int mbus_offset = 0; |
| u32 ddb_range_size; |
| u32 dbuf_slice_mask; |
| u32 start, end; |
| int ret; |
| |
| if (new_dbuf_state->weight[pipe] == 0) { |
| skl_ddb_entry_init(&new_dbuf_state->ddb[pipe], 0, 0); |
| goto out; |
| } |
| |
| dbuf_slice_mask = new_dbuf_state->slices[pipe]; |
| |
| skl_ddb_entry_for_slices(i915, dbuf_slice_mask, &ddb_slices); |
| mbus_offset = mbus_ddb_offset(i915, dbuf_slice_mask); |
| ddb_range_size = skl_ddb_entry_size(&ddb_slices); |
| |
| intel_crtc_dbuf_weights(new_dbuf_state, pipe, |
| &weight_start, &weight_end, &weight_total); |
| |
| start = ddb_range_size * weight_start / weight_total; |
| end = ddb_range_size * weight_end / weight_total; |
| |
| skl_ddb_entry_init(&new_dbuf_state->ddb[pipe], |
| ddb_slices.start - mbus_offset + start, |
| ddb_slices.start - mbus_offset + end); |
| |
| out: |
| if (old_dbuf_state->slices[pipe] == new_dbuf_state->slices[pipe] && |
| skl_ddb_entry_equal(&old_dbuf_state->ddb[pipe], |
| &new_dbuf_state->ddb[pipe])) |
| return 0; |
| |
| ret = intel_atomic_lock_global_state(&new_dbuf_state->base); |
| if (ret) |
| return ret; |
| |
| crtc_state = intel_atomic_get_crtc_state(&state->base, crtc); |
| if (IS_ERR(crtc_state)) |
| return PTR_ERR(crtc_state); |
| |
| /* |
| * Used for checking overlaps, so we need absolute |
| * offsets instead of MBUS relative offsets. |
| */ |
| crtc_state->wm.skl.ddb.start = mbus_offset + new_dbuf_state->ddb[pipe].start; |
| crtc_state->wm.skl.ddb.end = mbus_offset + new_dbuf_state->ddb[pipe].end; |
| |
| drm_dbg_kms(&i915->drm, |
| "[CRTC:%d:%s] dbuf slices 0x%x -> 0x%x, ddb (%d - %d) -> (%d - %d), active pipes 0x%x -> 0x%x\n", |
| crtc->base.base.id, crtc->base.name, |
| old_dbuf_state->slices[pipe], new_dbuf_state->slices[pipe], |
| old_dbuf_state->ddb[pipe].start, old_dbuf_state->ddb[pipe].end, |
| new_dbuf_state->ddb[pipe].start, new_dbuf_state->ddb[pipe].end, |
| old_dbuf_state->active_pipes, new_dbuf_state->active_pipes); |
| |
| return 0; |
| } |
| |
| static int skl_compute_wm_params(const struct intel_crtc_state *crtc_state, |
| int width, const struct drm_format_info *format, |
| u64 modifier, unsigned int rotation, |
| u32 plane_pixel_rate, struct skl_wm_params *wp, |
| int color_plane); |
| |
| static void skl_compute_plane_wm(const struct intel_crtc_state *crtc_state, |
| struct intel_plane *plane, |
| int level, |
| unsigned int latency, |
| const struct skl_wm_params *wp, |
| const struct skl_wm_level *result_prev, |
| struct skl_wm_level *result /* out */); |
| |
| static unsigned int skl_wm_latency(struct drm_i915_private *i915, int level, |
| const struct skl_wm_params *wp) |
| { |
| unsigned int latency = i915->display.wm.skl_latency[level]; |
| |
| if (latency == 0) |
| return 0; |
| |
| /* |
| * WaIncreaseLatencyIPCEnabled: kbl,cfl |
| * Display WA #1141: kbl,cfl |
| */ |
| if ((IS_KABYLAKE(i915) || IS_COFFEELAKE(i915) || IS_COMETLAKE(i915)) && |
| skl_watermark_ipc_enabled(i915)) |
| latency += 4; |
| |
| if (skl_needs_memory_bw_wa(i915) && wp && wp->x_tiled) |
| latency += 15; |
| |
| return latency; |
| } |
| |
| static unsigned int |
| skl_cursor_allocation(const struct intel_crtc_state *crtc_state, |
| int num_active) |
| { |
| struct intel_plane *plane = to_intel_plane(crtc_state->uapi.crtc->cursor); |
| struct drm_i915_private *i915 = to_i915(crtc_state->uapi.crtc->dev); |
| struct skl_wm_level wm = {}; |
| int ret, min_ddb_alloc = 0; |
| struct skl_wm_params wp; |
| int level; |
| |
| ret = skl_compute_wm_params(crtc_state, 256, |
| drm_format_info(DRM_FORMAT_ARGB8888), |
| DRM_FORMAT_MOD_LINEAR, |
| DRM_MODE_ROTATE_0, |
| crtc_state->pixel_rate, &wp, 0); |
| drm_WARN_ON(&i915->drm, ret); |
| |
| for (level = 0; level < i915->display.wm.num_levels; level++) { |
| unsigned int latency = skl_wm_latency(i915, level, &wp); |
| |
| skl_compute_plane_wm(crtc_state, plane, level, latency, &wp, &wm, &wm); |
| if (wm.min_ddb_alloc == U16_MAX) |
| break; |
| |
| min_ddb_alloc = wm.min_ddb_alloc; |
| } |
| |
| return max(num_active == 1 ? 32 : 8, min_ddb_alloc); |
| } |
| |
| static void skl_ddb_entry_init_from_hw(struct skl_ddb_entry *entry, u32 reg) |
| { |
| skl_ddb_entry_init(entry, |
| REG_FIELD_GET(PLANE_BUF_START_MASK, reg), |
| REG_FIELD_GET(PLANE_BUF_END_MASK, reg)); |
| if (entry->end) |
| entry->end++; |
| } |
| |
| static void |
| skl_ddb_get_hw_plane_state(struct drm_i915_private *i915, |
| const enum pipe pipe, |
| const enum plane_id plane_id, |
| struct skl_ddb_entry *ddb, |
| struct skl_ddb_entry *ddb_y) |
| { |
| u32 val; |
| |
| /* Cursor doesn't support NV12/planar, so no extra calculation needed */ |
| if (plane_id == PLANE_CURSOR) { |
| val = intel_de_read(i915, CUR_BUF_CFG(pipe)); |
| skl_ddb_entry_init_from_hw(ddb, val); |
| return; |
| } |
| |
| val = intel_de_read(i915, PLANE_BUF_CFG(pipe, plane_id)); |
| skl_ddb_entry_init_from_hw(ddb, val); |
| |
| if (DISPLAY_VER(i915) >= 11) |
| return; |
| |
| val = intel_de_read(i915, PLANE_NV12_BUF_CFG(pipe, plane_id)); |
| skl_ddb_entry_init_from_hw(ddb_y, val); |
| } |
| |
| static void skl_pipe_ddb_get_hw_state(struct intel_crtc *crtc, |
| struct skl_ddb_entry *ddb, |
| struct skl_ddb_entry *ddb_y) |
| { |
| struct drm_i915_private *i915 = to_i915(crtc->base.dev); |
| enum intel_display_power_domain power_domain; |
| enum pipe pipe = crtc->pipe; |
| intel_wakeref_t wakeref; |
| enum plane_id plane_id; |
| |
| power_domain = POWER_DOMAIN_PIPE(pipe); |
| wakeref = intel_display_power_get_if_enabled(i915, power_domain); |
| if (!wakeref) |
| return; |
| |
| for_each_plane_id_on_crtc(crtc, plane_id) |
| skl_ddb_get_hw_plane_state(i915, pipe, |
| plane_id, |
| &ddb[plane_id], |
| &ddb_y[plane_id]); |
| |
| intel_display_power_put(i915, power_domain, wakeref); |
| } |
| |
| struct dbuf_slice_conf_entry { |
| u8 active_pipes; |
| u8 dbuf_mask[I915_MAX_PIPES]; |
| bool join_mbus; |
| }; |
| |
| /* |
| * Table taken from Bspec 12716 |
| * Pipes do have some preferred DBuf slice affinity, |
| * plus there are some hardcoded requirements on how |
| * those should be distributed for multipipe scenarios. |
| * For more DBuf slices algorithm can get even more messy |
| * and less readable, so decided to use a table almost |
| * as is from BSpec itself - that way it is at least easier |
| * to compare, change and check. |
| */ |
| static const struct dbuf_slice_conf_entry icl_allowed_dbufs[] = |
| /* Autogenerated with igt/tools/intel_dbuf_map tool: */ |
| { |
| { |
| .active_pipes = BIT(PIPE_A), |
| .dbuf_mask = { |
| [PIPE_A] = BIT(DBUF_S1), |
| }, |
| }, |
| { |
| .active_pipes = BIT(PIPE_B), |
| .dbuf_mask = { |
| [PIPE_B] = BIT(DBUF_S1), |
| }, |
| }, |
| { |
| .active_pipes = BIT(PIPE_A) | BIT(PIPE_B), |
| .dbuf_mask = { |
| [PIPE_A] = BIT(DBUF_S1), |
| [PIPE_B] = BIT(DBUF_S2), |
| }, |
| }, |
| { |
| .active_pipes = BIT(PIPE_C), |
| .dbuf_mask = { |
| [PIPE_C] = BIT(DBUF_S2), |
| }, |
| }, |
| { |
| .active_pipes = BIT(PIPE_A) | BIT(PIPE_C), |
| .dbuf_mask = { |
| [PIPE_A] = BIT(DBUF_S1), |
| [PIPE_C] = BIT(DBUF_S2), |
| }, |
| }, |
| { |
| .active_pipes = BIT(PIPE_B) | BIT(PIPE_C), |
| .dbuf_mask = { |
| [PIPE_B] = BIT(DBUF_S1), |
| [PIPE_C] = BIT(DBUF_S2), |
| }, |
| }, |
| { |
| .active_pipes = BIT(PIPE_A) | BIT(PIPE_B) | BIT(PIPE_C), |
| .dbuf_mask = { |
| [PIPE_A] = BIT(DBUF_S1), |
| [PIPE_B] = BIT(DBUF_S1), |
| [PIPE_C] = BIT(DBUF_S2), |
| }, |
| }, |
| {} |
| }; |
| |
| /* |
| * Table taken from Bspec 49255 |
| * Pipes do have some preferred DBuf slice affinity, |
| * plus there are some hardcoded requirements on how |
| * those should be distributed for multipipe scenarios. |
| * For more DBuf slices algorithm can get even more messy |
| * and less readable, so decided to use a table almost |
| * as is from BSpec itself - that way it is at least easier |
| * to compare, change and check. |
| */ |
| static const struct dbuf_slice_conf_entry tgl_allowed_dbufs[] = |
| /* Autogenerated with igt/tools/intel_dbuf_map tool: */ |
| { |
| { |
| .active_pipes = BIT(PIPE_A), |
| .dbuf_mask = { |
| [PIPE_A] = BIT(DBUF_S1) | BIT(DBUF_S2), |
| }, |
| }, |
| { |
| .active_pipes = BIT(PIPE_B), |
| .dbuf_mask = { |
| [PIPE_B] = BIT(DBUF_S1) | BIT(DBUF_S2), |
| }, |
| }, |
| { |
| .active_pipes = BIT(PIPE_A) | BIT(PIPE_B), |
| .dbuf_mask = { |
| [PIPE_A] = BIT(DBUF_S2), |
| [PIPE_B] = BIT(DBUF_S1), |
| }, |
| }, |
| { |
| .active_pipes = BIT(PIPE_C), |
| .dbuf_mask = { |
| [PIPE_C] = BIT(DBUF_S2) | BIT(DBUF_S1), |
| }, |
| }, |
| { |
| .active_pipes = BIT(PIPE_A) | BIT(PIPE_C), |
| .dbuf_mask = { |
| [PIPE_A] = BIT(DBUF_S1), |
| [PIPE_C] = BIT(DBUF_S2), |
| }, |
| }, |
| { |
| .active_pipes = BIT(PIPE_B) | BIT(PIPE_C), |
| .dbuf_mask = { |
| [PIPE_B] = BIT(DBUF_S1), |
| [PIPE_C] = BIT(DBUF_S2), |
| }, |
| }, |
| { |
| .active_pipes = BIT(PIPE_A) | BIT(PIPE_B) | BIT(PIPE_C), |
| .dbuf_mask = { |
| [PIPE_A] = BIT(DBUF_S1), |
| [PIPE_B] = BIT(DBUF_S1), |
| [PIPE_C] = BIT(DBUF_S2), |
| }, |
| }, |
| { |
| .active_pipes = BIT(PIPE_D), |
| .dbuf_mask = { |
| [PIPE_D] = BIT(DBUF_S2) | BIT(DBUF_S1), |
| }, |
| }, |
| { |
| .active_pipes = BIT(PIPE_A) | BIT(PIPE_D), |
| .dbuf_mask = { |
| [PIPE_A] = BIT(DBUF_S1), |
| [PIPE_D] = BIT(DBUF_S2), |
| }, |
| }, |
| { |
| .active_pipes = BIT(PIPE_B) | BIT(PIPE_D), |
| .dbuf_mask = { |
| [PIPE_B] = BIT(DBUF_S1), |
| [PIPE_D] = BIT(DBUF_S2), |
| }, |
| }, |
| { |
| .active_pipes = BIT(PIPE_A) | BIT(PIPE_B) | BIT(PIPE_D), |
| .dbuf_mask = { |
| [PIPE_A] = BIT(DBUF_S1), |
| [PIPE_B] = BIT(DBUF_S1), |
| [PIPE_D] = BIT(DBUF_S2), |
| }, |
| }, |
| { |
| .active_pipes = BIT(PIPE_C) | BIT(PIPE_D), |
| .dbuf_mask = { |
| [PIPE_C] = BIT(DBUF_S1), |
| [PIPE_D] = BIT(DBUF_S2), |
| }, |
| }, |
| { |
| .active_pipes = BIT(PIPE_A) | BIT(PIPE_C) | BIT(PIPE_D), |
| .dbuf_mask = { |
| [PIPE_A] = BIT(DBUF_S1), |
| [PIPE_C] = BIT(DBUF_S2), |
| [PIPE_D] = BIT(DBUF_S2), |
| }, |
| }, |
| { |
| .active_pipes = BIT(PIPE_B) | BIT(PIPE_C) | BIT(PIPE_D), |
| .dbuf_mask = { |
| [PIPE_B] = BIT(DBUF_S1), |
| [PIPE_C] = BIT(DBUF_S2), |
| [PIPE_D] = BIT(DBUF_S2), |
| }, |
| }, |
| { |
| .active_pipes = BIT(PIPE_A) | BIT(PIPE_B) | BIT(PIPE_C) | BIT(PIPE_D), |
| .dbuf_mask = { |
| [PIPE_A] = BIT(DBUF_S1), |
| [PIPE_B] = BIT(DBUF_S1), |
| [PIPE_C] = BIT(DBUF_S2), |
| [PIPE_D] = BIT(DBUF_S2), |
| }, |
| }, |
| {} |
| }; |
| |
| static const struct dbuf_slice_conf_entry dg2_allowed_dbufs[] = { |
| { |
| .active_pipes = BIT(PIPE_A), |
| .dbuf_mask = { |
| [PIPE_A] = BIT(DBUF_S1) | BIT(DBUF_S2), |
| }, |
| }, |
| { |
| .active_pipes = BIT(PIPE_B), |
| .dbuf_mask = { |
| [PIPE_B] = BIT(DBUF_S1) | BIT(DBUF_S2), |
| }, |
| }, |
| { |
| .active_pipes = BIT(PIPE_A) | BIT(PIPE_B), |
| .dbuf_mask = { |
| [PIPE_A] = BIT(DBUF_S1), |
| [PIPE_B] = BIT(DBUF_S2), |
| }, |
| }, |
| { |
| .active_pipes = BIT(PIPE_C), |
| .dbuf_mask = { |
| [PIPE_C] = BIT(DBUF_S3) | BIT(DBUF_S4), |
| }, |
| }, |
| { |
| .active_pipes = BIT(PIPE_A) | BIT(PIPE_C), |
| .dbuf_mask = { |
| [PIPE_A] = BIT(DBUF_S1) | BIT(DBUF_S2), |
| [PIPE_C] = BIT(DBUF_S3) | BIT(DBUF_S4), |
| }, |
| }, |
| { |
| .active_pipes = BIT(PIPE_B) | BIT(PIPE_C), |
| .dbuf_mask = { |
| [PIPE_B] = BIT(DBUF_S1) | BIT(DBUF_S2), |
| [PIPE_C] = BIT(DBUF_S3) | BIT(DBUF_S4), |
| }, |
| }, |
| { |
| .active_pipes = BIT(PIPE_A) | BIT(PIPE_B) | BIT(PIPE_C), |
| .dbuf_mask = { |
| [PIPE_A] = BIT(DBUF_S1), |
| [PIPE_B] = BIT(DBUF_S2), |
| [PIPE_C] = BIT(DBUF_S3) | BIT(DBUF_S4), |
| }, |
| }, |
| { |
| .active_pipes = BIT(PIPE_D), |
| .dbuf_mask = { |
| [PIPE_D] = BIT(DBUF_S3) | BIT(DBUF_S4), |
| }, |
| }, |
| { |
| .active_pipes = BIT(PIPE_A) | BIT(PIPE_D), |
| .dbuf_mask = { |
| [PIPE_A] = BIT(DBUF_S1) | BIT(DBUF_S2), |
| [PIPE_D] = BIT(DBUF_S3) | BIT(DBUF_S4), |
| }, |
| }, |
| { |
| .active_pipes = BIT(PIPE_B) | BIT(PIPE_D), |
| .dbuf_mask = { |
| [PIPE_B] = BIT(DBUF_S1) | BIT(DBUF_S2), |
| [PIPE_D] = BIT(DBUF_S3) | BIT(DBUF_S4), |
| }, |
| }, |
| { |
| .active_pipes = BIT(PIPE_A) | BIT(PIPE_B) | BIT(PIPE_D), |
| .dbuf_mask = { |
| [PIPE_A] = BIT(DBUF_S1), |
| [PIPE_B] = BIT(DBUF_S2), |
| [PIPE_D] = BIT(DBUF_S3) | BIT(DBUF_S4), |
| }, |
| }, |
| { |
| .active_pipes = BIT(PIPE_C) | BIT(PIPE_D), |
| .dbuf_mask = { |
| [PIPE_C] = BIT(DBUF_S3), |
| [PIPE_D] = BIT(DBUF_S4), |
| }, |
| }, |
| { |
| .active_pipes = BIT(PIPE_A) | BIT(PIPE_C) | BIT(PIPE_D), |
| .dbuf_mask = { |
| [PIPE_A] = BIT(DBUF_S1) | BIT(DBUF_S2), |
| [PIPE_C] = BIT(DBUF_S3), |
| [PIPE_D] = BIT(DBUF_S4), |
| }, |
| }, |
| { |
| .active_pipes = BIT(PIPE_B) | BIT(PIPE_C) | BIT(PIPE_D), |
| .dbuf_mask = { |
| [PIPE_B] = BIT(DBUF_S1) | BIT(DBUF_S2), |
| [PIPE_C] = BIT(DBUF_S3), |
| [PIPE_D] = BIT(DBUF_S4), |
| }, |
| }, |
| { |
| .active_pipes = BIT(PIPE_A) | BIT(PIPE_B) | BIT(PIPE_C) | BIT(PIPE_D), |
| .dbuf_mask = { |
| [PIPE_A] = BIT(DBUF_S1), |
| [PIPE_B] = BIT(DBUF_S2), |
| [PIPE_C] = BIT(DBUF_S3), |
| [PIPE_D] = BIT(DBUF_S4), |
| }, |
| }, |
| {} |
| }; |
| |
| static const struct dbuf_slice_conf_entry adlp_allowed_dbufs[] = { |
| /* |
| * Keep the join_mbus cases first so check_mbus_joined() |
| * will prefer them over the !join_mbus cases. |
| */ |
| { |
| .active_pipes = BIT(PIPE_A), |
| .dbuf_mask = { |
| [PIPE_A] = BIT(DBUF_S1) | BIT(DBUF_S2) | BIT(DBUF_S3) | BIT(DBUF_S4), |
| }, |
| .join_mbus = true, |
| }, |
| { |
| .active_pipes = BIT(PIPE_B), |
| .dbuf_mask = { |
| [PIPE_B] = BIT(DBUF_S1) | BIT(DBUF_S2) | BIT(DBUF_S3) | BIT(DBUF_S4), |
| }, |
| .join_mbus = true, |
| }, |
| { |
| .active_pipes = BIT(PIPE_A), |
| .dbuf_mask = { |
| [PIPE_A] = BIT(DBUF_S1) | BIT(DBUF_S2), |
| }, |
| .join_mbus = false, |
| }, |
| { |
| .active_pipes = BIT(PIPE_B), |
| .dbuf_mask = { |
| [PIPE_B] = BIT(DBUF_S3) | BIT(DBUF_S4), |
| }, |
| .join_mbus = false, |
| }, |
| { |
| .active_pipes = BIT(PIPE_A) | BIT(PIPE_B), |
| .dbuf_mask = { |
| [PIPE_A] = BIT(DBUF_S1) | BIT(DBUF_S2), |
| [PIPE_B] = BIT(DBUF_S3) | BIT(DBUF_S4), |
| }, |
| }, |
| { |
| .active_pipes = BIT(PIPE_C), |
| .dbuf_mask = { |
| [PIPE_C] = BIT(DBUF_S3) | BIT(DBUF_S4), |
| }, |
| }, |
| { |
| .active_pipes = BIT(PIPE_A) | BIT(PIPE_C), |
| .dbuf_mask = { |
| [PIPE_A] = BIT(DBUF_S1) | BIT(DBUF_S2), |
| [PIPE_C] = BIT(DBUF_S3) | BIT(DBUF_S4), |
| }, |
| }, |
| { |
| .active_pipes = BIT(PIPE_B) | BIT(PIPE_C), |
| .dbuf_mask = { |
| [PIPE_B] = BIT(DBUF_S3) | BIT(DBUF_S4), |
| [PIPE_C] = BIT(DBUF_S3) | BIT(DBUF_S4), |
| }, |
| }, |
| { |
| .active_pipes = BIT(PIPE_A) | BIT(PIPE_B) | BIT(PIPE_C), |
| .dbuf_mask = { |
| [PIPE_A] = BIT(DBUF_S1) | BIT(DBUF_S2), |
| [PIPE_B] = BIT(DBUF_S3) | BIT(DBUF_S4), |
| [PIPE_C] = BIT(DBUF_S3) | BIT(DBUF_S4), |
| }, |
| }, |
| { |
| .active_pipes = BIT(PIPE_D), |
| .dbuf_mask = { |
| [PIPE_D] = BIT(DBUF_S1) | BIT(DBUF_S2), |
| }, |
| }, |
| { |
| .active_pipes = BIT(PIPE_A) | BIT(PIPE_D), |
| .dbuf_mask = { |
| [PIPE_A] = BIT(DBUF_S1) | BIT(DBUF_S2), |
| [PIPE_D] = BIT(DBUF_S1) | BIT(DBUF_S2), |
| }, |
| }, |
| { |
| .active_pipes = BIT(PIPE_B) | BIT(PIPE_D), |
| .dbuf_mask = { |
| [PIPE_B] = BIT(DBUF_S3) | BIT(DBUF_S4), |
| [PIPE_D] = BIT(DBUF_S1) | BIT(DBUF_S2), |
| }, |
| }, |
| { |
| .active_pipes = BIT(PIPE_A) | BIT(PIPE_B) | BIT(PIPE_D), |
| .dbuf_mask = { |
| [PIPE_A] = BIT(DBUF_S1) | BIT(DBUF_S2), |
| [PIPE_B] = BIT(DBUF_S3) | BIT(DBUF_S4), |
| [PIPE_D] = BIT(DBUF_S1) | BIT(DBUF_S2), |
| }, |
| }, |
| { |
| .active_pipes = BIT(PIPE_C) | BIT(PIPE_D), |
| .dbuf_mask = { |
| [PIPE_C] = BIT(DBUF_S3) | BIT(DBUF_S4), |
| [PIPE_D] = BIT(DBUF_S1) | BIT(DBUF_S2), |
| }, |
| }, |
| { |
| .active_pipes = BIT(PIPE_A) | BIT(PIPE_C) | BIT(PIPE_D), |
| .dbuf_mask = { |
| [PIPE_A] = BIT(DBUF_S1) | BIT(DBUF_S2), |
| [PIPE_C] = BIT(DBUF_S3) | BIT(DBUF_S4), |
| [PIPE_D] = BIT(DBUF_S1) | BIT(DBUF_S2), |
| }, |
| }, |
| { |
| .active_pipes = BIT(PIPE_B) | BIT(PIPE_C) | BIT(PIPE_D), |
| .dbuf_mask = { |
| [PIPE_B] = BIT(DBUF_S3) | BIT(DBUF_S4), |
| [PIPE_C] = BIT(DBUF_S3) | BIT(DBUF_S4), |
| [PIPE_D] = BIT(DBUF_S1) | BIT(DBUF_S2), |
| }, |
| }, |
| { |
| .active_pipes = BIT(PIPE_A) | BIT(PIPE_B) | BIT(PIPE_C) | BIT(PIPE_D), |
| .dbuf_mask = { |
| [PIPE_A] = BIT(DBUF_S1) | BIT(DBUF_S2), |
| [PIPE_B] = BIT(DBUF_S3) | BIT(DBUF_S4), |
| [PIPE_C] = BIT(DBUF_S3) | BIT(DBUF_S4), |
| [PIPE_D] = BIT(DBUF_S1) | BIT(DBUF_S2), |
| }, |
| }, |
| {} |
| |
| }; |
| |
| static bool check_mbus_joined(u8 active_pipes, |
| const struct dbuf_slice_conf_entry *dbuf_slices) |
| { |
| int i; |
| |
| for (i = 0; dbuf_slices[i].active_pipes != 0; i++) { |
| if (dbuf_slices[i].active_pipes == active_pipes) |
| return dbuf_slices[i].join_mbus; |
| } |
| return false; |
| } |
| |
| static bool adlp_check_mbus_joined(u8 active_pipes) |
| { |
| return check_mbus_joined(active_pipes, adlp_allowed_dbufs); |
| } |
| |
| static u8 compute_dbuf_slices(enum pipe pipe, u8 active_pipes, bool join_mbus, |
| const struct dbuf_slice_conf_entry *dbuf_slices) |
| { |
| int i; |
| |
| for (i = 0; dbuf_slices[i].active_pipes != 0; i++) { |
| if (dbuf_slices[i].active_pipes == active_pipes && |
| dbuf_slices[i].join_mbus == join_mbus) |
| return dbuf_slices[i].dbuf_mask[pipe]; |
| } |
| return 0; |
| } |
| |
| /* |
| * This function finds an entry with same enabled pipe configuration and |
| * returns correspondent DBuf slice mask as stated in BSpec for particular |
| * platform. |
| */ |
| static u8 icl_compute_dbuf_slices(enum pipe pipe, u8 active_pipes, bool join_mbus) |
| { |
| /* |
| * FIXME: For ICL this is still a bit unclear as prev BSpec revision |
| * required calculating "pipe ratio" in order to determine |
| * if one or two slices can be used for single pipe configurations |
| * as additional constraint to the existing table. |
| * However based on recent info, it should be not "pipe ratio" |
| * but rather ratio between pixel_rate and cdclk with additional |
| * constants, so for now we are using only table until this is |
| * clarified. Also this is the reason why crtc_state param is |
| * still here - we will need it once those additional constraints |
| * pop up. |
| */ |
| return compute_dbuf_slices(pipe, active_pipes, join_mbus, |
| icl_allowed_dbufs); |
| } |
| |
| static u8 tgl_compute_dbuf_slices(enum pipe pipe, u8 active_pipes, bool join_mbus) |
| { |
| return compute_dbuf_slices(pipe, active_pipes, join_mbus, |
| tgl_allowed_dbufs); |
| } |
| |
| static u8 adlp_compute_dbuf_slices(enum pipe pipe, u8 active_pipes, bool join_mbus) |
| { |
| return compute_dbuf_slices(pipe, active_pipes, join_mbus, |
| adlp_allowed_dbufs); |
| } |
| |
| static u8 dg2_compute_dbuf_slices(enum pipe pipe, u8 active_pipes, bool join_mbus) |
| { |
| return compute_dbuf_slices(pipe, active_pipes, join_mbus, |
| dg2_allowed_dbufs); |
| } |
| |
| static u8 skl_compute_dbuf_slices(struct intel_crtc *crtc, u8 active_pipes, bool join_mbus) |
| { |
| struct drm_i915_private *i915 = to_i915(crtc->base.dev); |
| enum pipe pipe = crtc->pipe; |
| |
| if (IS_DG2(i915)) |
| return dg2_compute_dbuf_slices(pipe, active_pipes, join_mbus); |
| else if (DISPLAY_VER(i915) >= 13) |
| return adlp_compute_dbuf_slices(pipe, active_pipes, join_mbus); |
| else if (DISPLAY_VER(i915) == 12) |
| return tgl_compute_dbuf_slices(pipe, active_pipes, join_mbus); |
| else if (DISPLAY_VER(i915) == 11) |
| return icl_compute_dbuf_slices(pipe, active_pipes, join_mbus); |
| /* |
| * For anything else just return one slice yet. |
| * Should be extended for other platforms. |
| */ |
| return active_pipes & BIT(pipe) ? BIT(DBUF_S1) : 0; |
| } |
| |
| static bool |
| use_minimal_wm0_only(const struct intel_crtc_state *crtc_state, |
| struct intel_plane *plane) |
| { |
| struct drm_i915_private *i915 = to_i915(plane->base.dev); |
| |
| return DISPLAY_VER(i915) >= 13 && |
| crtc_state->uapi.async_flip && |
| plane->async_flip; |
| } |
| |
| static u64 |
| skl_total_relative_data_rate(const struct intel_crtc_state *crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| struct drm_i915_private *i915 = to_i915(crtc->base.dev); |
| enum plane_id plane_id; |
| u64 data_rate = 0; |
| |
| for_each_plane_id_on_crtc(crtc, plane_id) { |
| if (plane_id == PLANE_CURSOR) |
| continue; |
| |
| data_rate += crtc_state->rel_data_rate[plane_id]; |
| |
| if (DISPLAY_VER(i915) < 11) |
| data_rate += crtc_state->rel_data_rate_y[plane_id]; |
| } |
| |
| return data_rate; |
| } |
| |
| const struct skl_wm_level * |
| skl_plane_wm_level(const struct skl_pipe_wm *pipe_wm, |
| enum plane_id plane_id, |
| int level) |
| { |
| const struct skl_plane_wm *wm = &pipe_wm->planes[plane_id]; |
| |
| if (level == 0 && pipe_wm->use_sagv_wm) |
| return &wm->sagv.wm0; |
| |
| return &wm->wm[level]; |
| } |
| |
| const struct skl_wm_level * |
| skl_plane_trans_wm(const struct skl_pipe_wm *pipe_wm, |
| enum plane_id plane_id) |
| { |
| const struct skl_plane_wm *wm = &pipe_wm->planes[plane_id]; |
| |
| if (pipe_wm->use_sagv_wm) |
| return &wm->sagv.trans_wm; |
| |
| return &wm->trans_wm; |
| } |
| |
| /* |
| * We only disable the watermarks for each plane if |
| * they exceed the ddb allocation of said plane. This |
| * is done so that we don't end up touching cursor |
| * watermarks needlessly when some other plane reduces |
| * our max possible watermark level. |
| * |
| * Bspec has this to say about the PLANE_WM enable bit: |
| * "All the watermarks at this level for all enabled |
| * planes must be enabled before the level will be used." |
| * So this is actually safe to do. |
| */ |
| static void |
| skl_check_wm_level(struct skl_wm_level *wm, const struct skl_ddb_entry *ddb) |
| { |
| if (wm->min_ddb_alloc > skl_ddb_entry_size(ddb)) |
| memset(wm, 0, sizeof(*wm)); |
| } |
| |
| static void |
| skl_check_nv12_wm_level(struct skl_wm_level *wm, struct skl_wm_level *uv_wm, |
| const struct skl_ddb_entry *ddb_y, const struct skl_ddb_entry *ddb) |
| { |
| if (wm->min_ddb_alloc > skl_ddb_entry_size(ddb_y) || |
| uv_wm->min_ddb_alloc > skl_ddb_entry_size(ddb)) { |
| memset(wm, 0, sizeof(*wm)); |
| memset(uv_wm, 0, sizeof(*uv_wm)); |
| } |
| } |
| |
| static bool skl_need_wm_copy_wa(struct drm_i915_private *i915, int level, |
| const struct skl_plane_wm *wm) |
| { |
| /* |
| * Wa_1408961008:icl, ehl |
| * Wa_14012656716:tgl, adl |
| * Wa_14017887344:icl |
| * Wa_14017868169:adl, tgl |
| * Due to some power saving optimizations, different subsystems |
| * like PSR, might still use even disabled wm level registers, |
| * for "reference", so lets keep at least the values sane. |
| * Considering amount of WA requiring us to do similar things, was |
| * decided to simply do it for all of the platforms, as those wm |
| * levels are disabled, this isn't going to do harm anyway. |
| */ |
| return level > 0 && !wm->wm[level].enable; |
| } |
| |
| struct skl_plane_ddb_iter { |
| u64 data_rate; |
| u16 start, size; |
| }; |
| |
| static void |
| skl_allocate_plane_ddb(struct skl_plane_ddb_iter *iter, |
| struct skl_ddb_entry *ddb, |
| const struct skl_wm_level *wm, |
| u64 data_rate) |
| { |
| u16 size, extra = 0; |
| |
| if (data_rate) { |
| extra = min_t(u16, iter->size, |
| DIV64_U64_ROUND_UP(iter->size * data_rate, |
| iter->data_rate)); |
| iter->size -= extra; |
| iter->data_rate -= data_rate; |
| } |
| |
| /* |
| * Keep ddb entry of all disabled planes explicitly zeroed |
| * to avoid skl_ddb_add_affected_planes() adding them to |
| * the state when other planes change their allocations. |
| */ |
| size = wm->min_ddb_alloc + extra; |
| if (size) |
| iter->start = skl_ddb_entry_init(ddb, iter->start, |
| iter->start + size); |
| } |
| |
| static int |
| skl_crtc_allocate_plane_ddb(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| struct drm_i915_private *i915 = to_i915(crtc->base.dev); |
| struct intel_crtc_state *crtc_state = |
| intel_atomic_get_new_crtc_state(state, crtc); |
| const struct intel_dbuf_state *dbuf_state = |
| intel_atomic_get_new_dbuf_state(state); |
| const struct skl_ddb_entry *alloc = &dbuf_state->ddb[crtc->pipe]; |
| int num_active = hweight8(dbuf_state->active_pipes); |
| struct skl_plane_ddb_iter iter; |
| enum plane_id plane_id; |
| u16 cursor_size; |
| u32 blocks; |
| int level; |
| |
| /* Clear the partitioning for disabled planes. */ |
| memset(crtc_state->wm.skl.plane_ddb, 0, sizeof(crtc_state->wm.skl.plane_ddb)); |
| memset(crtc_state->wm.skl.plane_ddb_y, 0, sizeof(crtc_state->wm.skl.plane_ddb_y)); |
| |
| if (!crtc_state->hw.active) |
| return 0; |
| |
| iter.start = alloc->start; |
| iter.size = skl_ddb_entry_size(alloc); |
| if (iter.size == 0) |
| return 0; |
| |
| /* Allocate fixed number of blocks for cursor. */ |
| cursor_size = skl_cursor_allocation(crtc_state, num_active); |
| iter.size -= cursor_size; |
| skl_ddb_entry_init(&crtc_state->wm.skl.plane_ddb[PLANE_CURSOR], |
| alloc->end - cursor_size, alloc->end); |
| |
| iter.data_rate = skl_total_relative_data_rate(crtc_state); |
| |
| /* |
| * Find the highest watermark level for which we can satisfy the block |
| * requirement of active planes. |
| */ |
| for (level = i915->display.wm.num_levels - 1; level >= 0; level--) { |
| blocks = 0; |
| for_each_plane_id_on_crtc(crtc, plane_id) { |
| const struct skl_plane_wm *wm = |
| &crtc_state->wm.skl.optimal.planes[plane_id]; |
| |
| if (plane_id == PLANE_CURSOR) { |
| const struct skl_ddb_entry *ddb = |
| &crtc_state->wm.skl.plane_ddb[plane_id]; |
| |
| if (wm->wm[level].min_ddb_alloc > skl_ddb_entry_size(ddb)) { |
| drm_WARN_ON(&i915->drm, |
| wm->wm[level].min_ddb_alloc != U16_MAX); |
| blocks = U32_MAX; |
| break; |
| } |
| continue; |
| } |
| |
| blocks += wm->wm[level].min_ddb_alloc; |
| blocks += wm->uv_wm[level].min_ddb_alloc; |
| } |
| |
| if (blocks <= iter.size) { |
| iter.size -= blocks; |
| break; |
| } |
| } |
| |
| if (level < 0) { |
| drm_dbg_kms(&i915->drm, |
| "Requested display configuration exceeds system DDB limitations"); |
| drm_dbg_kms(&i915->drm, "minimum required %d/%d\n", |
| blocks, iter.size); |
| return -EINVAL; |
| } |
| |
| /* avoid the WARN later when we don't allocate any extra DDB */ |
| if (iter.data_rate == 0) |
| iter.size = 0; |
| |
| /* |
| * Grant each plane the blocks it requires at the highest achievable |
| * watermark level, plus an extra share of the leftover blocks |
| * proportional to its relative data rate. |
| */ |
| for_each_plane_id_on_crtc(crtc, plane_id) { |
| struct skl_ddb_entry *ddb = |
| &crtc_state->wm.skl.plane_ddb[plane_id]; |
| struct skl_ddb_entry *ddb_y = |
| &crtc_state->wm.skl.plane_ddb_y[plane_id]; |
| const struct skl_plane_wm *wm = |
| &crtc_state->wm.skl.optimal.planes[plane_id]; |
| |
| if (plane_id == PLANE_CURSOR) |
| continue; |
| |
| if (DISPLAY_VER(i915) < 11 && |
| crtc_state->nv12_planes & BIT(plane_id)) { |
| skl_allocate_plane_ddb(&iter, ddb_y, &wm->wm[level], |
| crtc_state->rel_data_rate_y[plane_id]); |
| skl_allocate_plane_ddb(&iter, ddb, &wm->uv_wm[level], |
| crtc_state->rel_data_rate[plane_id]); |
| } else { |
| skl_allocate_plane_ddb(&iter, ddb, &wm->wm[level], |
| crtc_state->rel_data_rate[plane_id]); |
| } |
| } |
| drm_WARN_ON(&i915->drm, iter.size != 0 || iter.data_rate != 0); |
| |
| /* |
| * When we calculated watermark values we didn't know how high |
| * of a level we'd actually be able to hit, so we just marked |
| * all levels as "enabled." Go back now and disable the ones |
| * that aren't actually possible. |
| */ |
| for (level++; level < i915->display.wm.num_levels; level++) { |
| for_each_plane_id_on_crtc(crtc, plane_id) { |
| const struct skl_ddb_entry *ddb = |
| &crtc_state->wm.skl.plane_ddb[plane_id]; |
| const struct skl_ddb_entry *ddb_y = |
| &crtc_state->wm.skl.plane_ddb_y[plane_id]; |
| struct skl_plane_wm *wm = |
| &crtc_state->wm.skl.optimal.planes[plane_id]; |
| |
| if (DISPLAY_VER(i915) < 11 && |
| crtc_state->nv12_planes & BIT(plane_id)) |
| skl_check_nv12_wm_level(&wm->wm[level], |
| &wm->uv_wm[level], |
| ddb_y, ddb); |
| else |
| skl_check_wm_level(&wm->wm[level], ddb); |
| |
| if (skl_need_wm_copy_wa(i915, level, wm)) { |
| wm->wm[level].blocks = wm->wm[level - 1].blocks; |
| wm->wm[level].lines = wm->wm[level - 1].lines; |
| wm->wm[level].ignore_lines = wm->wm[level - 1].ignore_lines; |
| } |
| } |
| } |
| |
| /* |
| * Go back and disable the transition and SAGV watermarks |
| * if it turns out we don't have enough DDB blocks for them. |
| */ |
| for_each_plane_id_on_crtc(crtc, plane_id) { |
| const struct skl_ddb_entry *ddb = |
| &crtc_state->wm.skl.plane_ddb[plane_id]; |
| const struct skl_ddb_entry *ddb_y = |
| &crtc_state->wm.skl.plane_ddb_y[plane_id]; |
| struct skl_plane_wm *wm = |
| &crtc_state->wm.skl.optimal.planes[plane_id]; |
| |
| if (DISPLAY_VER(i915) < 11 && |
| crtc_state->nv12_planes & BIT(plane_id)) { |
| skl_check_wm_level(&wm->trans_wm, ddb_y); |
| } else { |
| WARN_ON(skl_ddb_entry_size(ddb_y)); |
| |
| skl_check_wm_level(&wm->trans_wm, ddb); |
| } |
| |
| skl_check_wm_level(&wm->sagv.wm0, ddb); |
| skl_check_wm_level(&wm->sagv.trans_wm, ddb); |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * The max latency should be 257 (max the punit can code is 255 and we add 2us |
| * for the read latency) and cpp should always be <= 8, so that |
| * should allow pixel_rate up to ~2 GHz which seems sufficient since max |
| * 2xcdclk is 1350 MHz and the pixel rate should never exceed that. |
| */ |
| static uint_fixed_16_16_t |
| skl_wm_method1(const struct drm_i915_private *i915, u32 pixel_rate, |
| u8 cpp, u32 latency, u32 dbuf_block_size) |
| { |
| u32 wm_intermediate_val; |
| uint_fixed_16_16_t ret; |
| |
| if (latency == 0) |
| return FP_16_16_MAX; |
| |
| wm_intermediate_val = latency * pixel_rate * cpp; |
| ret = div_fixed16(wm_intermediate_val, 1000 * dbuf_block_size); |
| |
| if (DISPLAY_VER(i915) >= 10) |
| ret = add_fixed16_u32(ret, 1); |
| |
| return ret; |
| } |
| |
| static uint_fixed_16_16_t |
| skl_wm_method2(u32 pixel_rate, u32 pipe_htotal, u32 latency, |
| uint_fixed_16_16_t plane_blocks_per_line) |
| { |
| u32 wm_intermediate_val; |
| uint_fixed_16_16_t ret; |
| |
| if (latency == 0) |
| return FP_16_16_MAX; |
| |
| wm_intermediate_val = latency * pixel_rate; |
| wm_intermediate_val = DIV_ROUND_UP(wm_intermediate_val, |
| pipe_htotal * 1000); |
| ret = mul_u32_fixed16(wm_intermediate_val, plane_blocks_per_line); |
| return ret; |
| } |
| |
| static uint_fixed_16_16_t |
| intel_get_linetime_us(const struct intel_crtc_state *crtc_state) |
| { |
| struct drm_i915_private *i915 = to_i915(crtc_state->uapi.crtc->dev); |
| u32 pixel_rate; |
| u32 crtc_htotal; |
| uint_fixed_16_16_t linetime_us; |
| |
| if (!crtc_state->hw.active) |
| return u32_to_fixed16(0); |
| |
| pixel_rate = crtc_state->pixel_rate; |
| |
| if (drm_WARN_ON(&i915->drm, pixel_rate == 0)) |
| return u32_to_fixed16(0); |
| |
| crtc_htotal = crtc_state->hw.pipe_mode.crtc_htotal; |
| linetime_us = div_fixed16(crtc_htotal * 1000, pixel_rate); |
| |
| return linetime_us; |
| } |
| |
| static int |
| skl_compute_wm_params(const struct intel_crtc_state *crtc_state, |
| int width, const struct drm_format_info *format, |
| u64 modifier, unsigned int rotation, |
| u32 plane_pixel_rate, struct skl_wm_params *wp, |
| int color_plane) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| struct drm_i915_private *i915 = to_i915(crtc->base.dev); |
| u32 interm_pbpl; |
| |
| /* only planar format has two planes */ |
| if (color_plane == 1 && |
| !intel_format_info_is_yuv_semiplanar(format, modifier)) { |
| drm_dbg_kms(&i915->drm, |
| "Non planar format have single plane\n"); |
| return -EINVAL; |
| } |
| |
| wp->x_tiled = modifier == I915_FORMAT_MOD_X_TILED; |
| wp->y_tiled = modifier != I915_FORMAT_MOD_X_TILED && |
| intel_fb_is_tiled_modifier(modifier); |
| wp->rc_surface = intel_fb_is_ccs_modifier(modifier); |
| wp->is_planar = intel_format_info_is_yuv_semiplanar(format, modifier); |
| |
| wp->width = width; |
| if (color_plane == 1 && wp->is_planar) |
| wp->width /= 2; |
| |
| wp->cpp = format->cpp[color_plane]; |
| wp->plane_pixel_rate = plane_pixel_rate; |
| |
| if (DISPLAY_VER(i915) >= 11 && |
| modifier == I915_FORMAT_MOD_Yf_TILED && wp->cpp == 1) |
| wp->dbuf_block_size = 256; |
| else |
| wp->dbuf_block_size = 512; |
| |
| if (drm_rotation_90_or_270(rotation)) { |
| switch (wp->cpp) { |
| case 1: |
| wp->y_min_scanlines = 16; |
| break; |
| case 2: |
| wp->y_min_scanlines = 8; |
| break; |
| case 4: |
| wp->y_min_scanlines = 4; |
| break; |
| default: |
| MISSING_CASE(wp->cpp); |
| return -EINVAL; |
| } |
| } else { |
| wp->y_min_scanlines = 4; |
| } |
| |
| if (skl_needs_memory_bw_wa(i915)) |
| wp->y_min_scanlines *= 2; |
| |
| wp->plane_bytes_per_line = wp->width * wp->cpp; |
| if (wp->y_tiled) { |
| interm_pbpl = DIV_ROUND_UP(wp->plane_bytes_per_line * |
| wp->y_min_scanlines, |
| wp->dbuf_block_size); |
| |
| if (DISPLAY_VER(i915) >= 10) |
| interm_pbpl++; |
| |
| wp->plane_blocks_per_line = div_fixed16(interm_pbpl, |
| wp->y_min_scanlines); |
| } else { |
| interm_pbpl = DIV_ROUND_UP(wp->plane_bytes_per_line, |
| wp->dbuf_block_size); |
| |
| if (!wp->x_tiled || DISPLAY_VER(i915) >= 10) |
| interm_pbpl++; |
| |
| wp->plane_blocks_per_line = u32_to_fixed16(interm_pbpl); |
| } |
| |
| wp->y_tile_minimum = mul_u32_fixed16(wp->y_min_scanlines, |
| wp->plane_blocks_per_line); |
| |
| wp->linetime_us = fixed16_to_u32_round_up(intel_get_linetime_us(crtc_state)); |
| |
| return 0; |
| } |
| |
| static int |
| skl_compute_plane_wm_params(const struct intel_crtc_state *crtc_state, |
| const struct intel_plane_state *plane_state, |
| struct skl_wm_params *wp, int color_plane) |
| { |
| const struct drm_framebuffer *fb = plane_state->hw.fb; |
| int width; |
| |
| /* |
| * Src coordinates are already rotated by 270 degrees for |
| * the 90/270 degree plane rotation cases (to match the |
| * GTT mapping), hence no need to account for rotation here. |
| */ |
| width = drm_rect_width(&plane_state->uapi.src) >> 16; |
| |
| return skl_compute_wm_params(crtc_state, width, |
| fb->format, fb->modifier, |
| plane_state->hw.rotation, |
| intel_plane_pixel_rate(crtc_state, plane_state), |
| wp, color_plane); |
| } |
| |
| static bool skl_wm_has_lines(struct drm_i915_private *i915, int level) |
| { |
| if (DISPLAY_VER(i915) >= 10) |
| return true; |
| |
| /* The number of lines are ignored for the level 0 watermark. */ |
| return level > 0; |
| } |
| |
| static int skl_wm_max_lines(struct drm_i915_private *i915) |
| { |
| if (DISPLAY_VER(i915) >= 13) |
| return 255; |
| else |
| return 31; |
| } |
| |
| static void skl_compute_plane_wm(const struct intel_crtc_state *crtc_state, |
| struct intel_plane *plane, |
| int level, |
| unsigned int latency, |
| const struct skl_wm_params *wp, |
| const struct skl_wm_level *result_prev, |
| struct skl_wm_level *result /* out */) |
| { |
| struct drm_i915_private *i915 = to_i915(crtc_state->uapi.crtc->dev); |
| uint_fixed_16_16_t method1, method2; |
| uint_fixed_16_16_t selected_result; |
| u32 blocks, lines, min_ddb_alloc = 0; |
| |
| if (latency == 0 || |
| (use_minimal_wm0_only(crtc_state, plane) && level > 0)) { |
| /* reject it */ |
| result->min_ddb_alloc = U16_MAX; |
| return; |
| } |
| |
| method1 = skl_wm_method1(i915, wp->plane_pixel_rate, |
| wp->cpp, latency, wp->dbuf_block_size); |
| method2 = skl_wm_method2(wp->plane_pixel_rate, |
| crtc_state->hw.pipe_mode.crtc_htotal, |
| latency, |
| wp->plane_blocks_per_line); |
| |
| if (wp->y_tiled) { |
| selected_result = max_fixed16(method2, wp->y_tile_minimum); |
| } else { |
| if ((wp->cpp * crtc_state->hw.pipe_mode.crtc_htotal / |
| wp->dbuf_block_size < 1) && |
| (wp->plane_bytes_per_line / wp->dbuf_block_size < 1)) { |
| selected_result = method2; |
| } else if (latency >= wp->linetime_us) { |
| if (DISPLAY_VER(i915) == 9) |
| selected_result = min_fixed16(method1, method2); |
| else |
| selected_result = method2; |
| } else { |
| selected_result = method1; |
| } |
| } |
| |
| blocks = fixed16_to_u32_round_up(selected_result) + 1; |
| /* |
| * Lets have blocks at minimum equivalent to plane_blocks_per_line |
| * as there will be at minimum one line for lines configuration. This |
| * is a work around for FIFO underruns observed with resolutions like |
| * 4k 60 Hz in single channel DRAM configurations. |
| * |
| * As per the Bspec 49325, if the ddb allocation can hold at least |
| * one plane_blocks_per_line, we should have selected method2 in |
| * the above logic. Assuming that modern versions have enough dbuf |
| * and method2 guarantees blocks equivalent to at least 1 line, |
| * select the blocks as plane_blocks_per_line. |
| * |
| * TODO: Revisit the logic when we have better understanding on DRAM |
| * channels' impact on the level 0 memory latency and the relevant |
| * wm calculations. |
| */ |
| if (skl_wm_has_lines(i915, level)) |
| blocks = max(blocks, |
| fixed16_to_u32_round_up(wp->plane_blocks_per_line)); |
| lines = div_round_up_fixed16(selected_result, |
| wp->plane_blocks_per_line); |
| |
| if (DISPLAY_VER(i915) == 9) { |
| /* Display WA #1125: skl,bxt,kbl */ |
| if (level == 0 && wp->rc_surface) |
| blocks += fixed16_to_u32_round_up(wp->y_tile_minimum); |
| |
| /* Display WA #1126: skl,bxt,kbl */ |
| if (level >= 1 && level <= 7) { |
| if (wp->y_tiled) { |
| blocks += fixed16_to_u32_round_up(wp->y_tile_minimum); |
| lines += wp->y_min_scanlines; |
| } else { |
| blocks++; |
| } |
| |
| /* |
| * Make sure result blocks for higher latency levels are |
| * at least as high as level below the current level. |
| * Assumption in DDB algorithm optimization for special |
| * cases. Also covers Display WA #1125 for RC. |
| */ |
| if (result_prev->blocks > blocks) |
| blocks = result_prev->blocks; |
| } |
| } |
| |
| if (DISPLAY_VER(i915) >= 11) { |
| if (wp->y_tiled) { |
| int extra_lines; |
| |
| if (lines % wp->y_min_scanlines == 0) |
| extra_lines = wp->y_min_scanlines; |
| else |
| extra_lines = wp->y_min_scanlines * 2 - |
| lines % wp->y_min_scanlines; |
| |
| min_ddb_alloc = mul_round_up_u32_fixed16(lines + extra_lines, |
| wp->plane_blocks_per_line); |
| } else { |
| min_ddb_alloc = blocks + DIV_ROUND_UP(blocks, 10); |
| } |
| } |
| |
| if (!skl_wm_has_lines(i915, level)) |
| lines = 0; |
| |
| if (lines > skl_wm_max_lines(i915)) { |
| /* reject it */ |
| result->min_ddb_alloc = U16_MAX; |
| return; |
| } |
| |
| /* |
| * If lines is valid, assume we can use this watermark level |
| * for now. We'll come back and disable it after we calculate the |
| * DDB allocation if it turns out we don't actually have enough |
| * blocks to satisfy it. |
| */ |
| result->blocks = blocks; |
| result->lines = lines; |
| /* Bspec says: value >= plane ddb allocation -> invalid, hence the +1 here */ |
| result->min_ddb_alloc = max(min_ddb_alloc, blocks) + 1; |
| result->enable = true; |
| |
| if (DISPLAY_VER(i915) < 12 && i915->display.sagv.block_time_us) |
| result->can_sagv = latency >= i915->display.sagv.block_time_us; |
| } |
| |
| static void |
| skl_compute_wm_levels(const struct intel_crtc_state *crtc_state, |
| struct intel_plane *plane, |
| const struct skl_wm_params *wm_params, |
| struct skl_wm_level *levels) |
| { |
| struct drm_i915_private *i915 = to_i915(crtc_state->uapi.crtc->dev); |
| struct skl_wm_level *result_prev = &levels[0]; |
| int level; |
| |
| for (level = 0; level < i915->display.wm.num_levels; level++) { |
| struct skl_wm_level *result = &levels[level]; |
| unsigned int latency = skl_wm_latency(i915, level, wm_params); |
| |
| skl_compute_plane_wm(crtc_state, plane, level, latency, |
| wm_params, result_prev, result); |
| |
| result_prev = result; |
| } |
| } |
| |
| static void tgl_compute_sagv_wm(const struct intel_crtc_state *crtc_state, |
| struct intel_plane *plane, |
| const struct skl_wm_params *wm_params, |
| struct skl_plane_wm *plane_wm) |
| { |
| struct drm_i915_private *i915 = to_i915(crtc_state->uapi.crtc->dev); |
| struct skl_wm_level *sagv_wm = &plane_wm->sagv.wm0; |
| struct skl_wm_level *levels = plane_wm->wm; |
| unsigned int latency = 0; |
| |
| if (i915->display.sagv.block_time_us) |
| latency = i915->display.sagv.block_time_us + |
| skl_wm_latency(i915, 0, wm_params); |
| |
| skl_compute_plane_wm(crtc_state, plane, 0, latency, |
| wm_params, &levels[0], |
| sagv_wm); |
| } |
| |
| static void skl_compute_transition_wm(struct drm_i915_private *i915, |
| struct skl_wm_level *trans_wm, |
| const struct skl_wm_level *wm0, |
| const struct skl_wm_params *wp) |
| { |
| u16 trans_min, trans_amount, trans_y_tile_min; |
| u16 wm0_blocks, trans_offset, blocks; |
| |
| /* Transition WM don't make any sense if ipc is disabled */ |
| if (!skl_watermark_ipc_enabled(i915)) |
| return; |
| |
| /* |
| * WaDisableTWM:skl,kbl,cfl,bxt |
| * Transition WM are not recommended by HW team for GEN9 |
| */ |
| if (DISPLAY_VER(i915) == 9) |
| return; |
| |
| if (DISPLAY_VER(i915) >= 11) |
| trans_min = 4; |
| else |
| trans_min = 14; |
| |
| /* Display WA #1140: glk,cnl */ |
| if (DISPLAY_VER(i915) == 10) |
| trans_amount = 0; |
| else |
| trans_amount = 10; /* This is configurable amount */ |
| |
| trans_offset = trans_min + trans_amount; |
| |
| /* |
| * The spec asks for Selected Result Blocks for wm0 (the real value), |
| * not Result Blocks (the integer value). Pay attention to the capital |
| * letters. The value wm_l0->blocks is actually Result Blocks, but |
| * since Result Blocks is the ceiling of Selected Result Blocks plus 1, |
| * and since we later will have to get the ceiling of the sum in the |
| * transition watermarks calculation, we can just pretend Selected |
| * Result Blocks is Result Blocks minus 1 and it should work for the |
| * current platforms. |
| */ |
| wm0_blocks = wm0->blocks - 1; |
| |
| if (wp->y_tiled) { |
| trans_y_tile_min = |
| (u16)mul_round_up_u32_fixed16(2, wp->y_tile_minimum); |
| blocks = max(wm0_blocks, trans_y_tile_min) + trans_offset; |
| } else { |
| blocks = wm0_blocks + trans_offset; |
| } |
| blocks++; |
| |
| /* |
| * Just assume we can enable the transition watermark. After |
| * computing the DDB we'll come back and disable it if that |
| * assumption turns out to be false. |
| */ |
| trans_wm->blocks = blocks; |
| trans_wm->min_ddb_alloc = max_t(u16, wm0->min_ddb_alloc, blocks + 1); |
| trans_wm->enable = true; |
| } |
| |
| static int skl_build_plane_wm_single(struct intel_crtc_state *crtc_state, |
| const struct intel_plane_state *plane_state, |
| struct intel_plane *plane, int color_plane) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| struct drm_i915_private *i915 = to_i915(crtc->base.dev); |
| struct skl_plane_wm *wm = &crtc_state->wm.skl.raw.planes[plane->id]; |
| struct skl_wm_params wm_params; |
| int ret; |
| |
| ret = skl_compute_plane_wm_params(crtc_state, plane_state, |
| &wm_params, color_plane); |
| if (ret) |
| return ret; |
| |
| skl_compute_wm_levels(crtc_state, plane, &wm_params, wm->wm); |
| |
| skl_compute_transition_wm(i915, &wm->trans_wm, |
| &wm->wm[0], &wm_params); |
| |
| if (DISPLAY_VER(i915) >= 12) { |
| tgl_compute_sagv_wm(crtc_state, plane, &wm_params, wm); |
| |
| skl_compute_transition_wm(i915, &wm->sagv.trans_wm, |
| &wm->sagv.wm0, &wm_params); |
| } |
| |
| return 0; |
| } |
| |
| static int skl_build_plane_wm_uv(struct intel_crtc_state *crtc_state, |
| const struct intel_plane_state *plane_state, |
| struct intel_plane *plane) |
| { |
| struct skl_plane_wm *wm = &crtc_state->wm.skl.raw.planes[plane->id]; |
| struct skl_wm_params wm_params; |
| int ret; |
| |
| wm->is_planar = true; |
| |
| /* uv plane watermarks must also be validated for NV12/Planar */ |
| ret = skl_compute_plane_wm_params(crtc_state, plane_state, |
| &wm_params, 1); |
| if (ret) |
| return ret; |
| |
| skl_compute_wm_levels(crtc_state, plane, &wm_params, wm->uv_wm); |
| |
| return 0; |
| } |
| |
| static int skl_build_plane_wm(struct intel_crtc_state *crtc_state, |
| const struct intel_plane_state *plane_state) |
| { |
| struct intel_plane *plane = to_intel_plane(plane_state->uapi.plane); |
| enum plane_id plane_id = plane->id; |
| struct skl_plane_wm *wm = &crtc_state->wm.skl.raw.planes[plane_id]; |
| const struct drm_framebuffer *fb = plane_state->hw.fb; |
| int ret; |
| |
| memset(wm, 0, sizeof(*wm)); |
| |
| if (!intel_wm_plane_visible(crtc_state, plane_state)) |
| return 0; |
| |
| ret = skl_build_plane_wm_single(crtc_state, plane_state, |
| plane, 0); |
| if (ret) |
| return ret; |
| |
| if (fb->format->is_yuv && fb->format->num_planes > 1) { |
| ret = skl_build_plane_wm_uv(crtc_state, plane_state, |
| plane); |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int icl_build_plane_wm(struct intel_crtc_state *crtc_state, |
| const struct intel_plane_state *plane_state) |
| { |
| struct intel_plane *plane = to_intel_plane(plane_state->uapi.plane); |
| struct drm_i915_private *i915 = to_i915(plane->base.dev); |
| enum plane_id plane_id = plane->id; |
| struct skl_plane_wm *wm = &crtc_state->wm.skl.raw.planes[plane_id]; |
| int ret; |
| |
| /* Watermarks calculated in master */ |
| if (plane_state->planar_slave) |
| return 0; |
| |
| memset(wm, 0, sizeof(*wm)); |
| |
| if (plane_state->planar_linked_plane) { |
| const struct drm_framebuffer *fb = plane_state->hw.fb; |
| |
| drm_WARN_ON(&i915->drm, |
| !intel_wm_plane_visible(crtc_state, plane_state)); |
| drm_WARN_ON(&i915->drm, !fb->format->is_yuv || |
| fb->format->num_planes == 1); |
| |
| ret = skl_build_plane_wm_single(crtc_state, plane_state, |
| plane_state->planar_linked_plane, 0); |
| if (ret) |
| return ret; |
| |
| ret = skl_build_plane_wm_single(crtc_state, plane_state, |
| plane, 1); |
| if (ret) |
| return ret; |
| } else if (intel_wm_plane_visible(crtc_state, plane_state)) { |
| ret = skl_build_plane_wm_single(crtc_state, plane_state, |
| plane, 0); |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static bool |
| skl_is_vblank_too_short(const struct intel_crtc_state *crtc_state, |
| int wm0_lines, int latency) |
| { |
| const struct drm_display_mode *adjusted_mode = |
| &crtc_state->hw.adjusted_mode; |
| |
| /* FIXME missing scaler and DSC pre-fill time */ |
| return crtc_state->framestart_delay + |
| intel_usecs_to_scanlines(adjusted_mode, latency) + |
| wm0_lines > |
| adjusted_mode->crtc_vtotal - adjusted_mode->crtc_vblank_start; |
| } |
| |
| static int skl_max_wm0_lines(const struct intel_crtc_state *crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| enum plane_id plane_id; |
| int wm0_lines = 0; |
| |
| for_each_plane_id_on_crtc(crtc, plane_id) { |
| const struct skl_plane_wm *wm = &crtc_state->wm.skl.optimal.planes[plane_id]; |
| |
| /* FIXME what about !skl_wm_has_lines() platforms? */ |
| wm0_lines = max_t(int, wm0_lines, wm->wm[0].lines); |
| } |
| |
| return wm0_lines; |
| } |
| |
| static int skl_max_wm_level_for_vblank(struct intel_crtc_state *crtc_state, |
| int wm0_lines) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| struct drm_i915_private *i915 = to_i915(crtc->base.dev); |
| int level; |
| |
| for (level = i915->display.wm.num_levels - 1; level >= 0; level--) { |
| int latency; |
| |
| /* FIXME should we care about the latency w/a's? */ |
| latency = skl_wm_latency(i915, level, NULL); |
| if (latency == 0) |
| continue; |
| |
| /* FIXME is it correct to use 0 latency for wm0 here? */ |
| if (level == 0) |
| latency = 0; |
| |
| if (!skl_is_vblank_too_short(crtc_state, wm0_lines, latency)) |
| return level; |
| } |
| |
| return -EINVAL; |
| } |
| |
| static int skl_wm_check_vblank(struct intel_crtc_state *crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| struct drm_i915_private *i915 = to_i915(crtc->base.dev); |
| int wm0_lines, level; |
| |
| if (!crtc_state->hw.active) |
| return 0; |
| |
| wm0_lines = skl_max_wm0_lines(crtc_state); |
| |
| level = skl_max_wm_level_for_vblank(crtc_state, wm0_lines); |
| if (level < 0) |
| return level; |
| |
| /* |
| * PSR needs to toggle LATENCY_REPORTING_REMOVED_PIPE_* |
| * based on whether we're limited by the vblank duration. |
| */ |
| crtc_state->wm_level_disabled = level < i915->display.wm.num_levels - 1; |
| |
| for (level++; level < i915->display.wm.num_levels; level++) { |
| enum plane_id plane_id; |
| |
| for_each_plane_id_on_crtc(crtc, plane_id) { |
| struct skl_plane_wm *wm = |
| &crtc_state->wm.skl.optimal.planes[plane_id]; |
| |
| /* |
| * FIXME just clear enable or flag the entire |
| * thing as bad via min_ddb_alloc=U16_MAX? |
| */ |
| wm->wm[level].enable = false; |
| wm->uv_wm[level].enable = false; |
| } |
| } |
| |
| if (DISPLAY_VER(i915) >= 12 && |
| i915->display.sagv.block_time_us && |
| skl_is_vblank_too_short(crtc_state, wm0_lines, |
| i915->display.sagv.block_time_us)) { |
| enum plane_id plane_id; |
| |
| for_each_plane_id_on_crtc(crtc, plane_id) { |
| struct skl_plane_wm *wm = |
| &crtc_state->wm.skl.optimal.planes[plane_id]; |
| |
| wm->sagv.wm0.enable = false; |
| wm->sagv.trans_wm.enable = false; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int skl_build_pipe_wm(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| struct drm_i915_private *i915 = to_i915(crtc->base.dev); |
| struct intel_crtc_state *crtc_state = |
| intel_atomic_get_new_crtc_state(state, crtc); |
| const struct intel_plane_state *plane_state; |
| struct intel_plane *plane; |
| int ret, i; |
| |
| for_each_new_intel_plane_in_state(state, plane, plane_state, i) { |
| /* |
| * FIXME should perhaps check {old,new}_plane_crtc->hw.crtc |
| * instead but we don't populate that correctly for NV12 Y |
| * planes so for now hack this. |
| */ |
| if (plane->pipe != crtc->pipe) |
| continue; |
| |
| if (DISPLAY_VER(i915) >= 11) |
| ret = icl_build_plane_wm(crtc_state, plane_state); |
| else |
| ret = skl_build_plane_wm(crtc_state, plane_state); |
| if (ret) |
| return ret; |
| } |
| |
| crtc_state->wm.skl.optimal = crtc_state->wm.skl.raw; |
| |
| return skl_wm_check_vblank(crtc_state); |
| } |
| |
| static bool skl_wm_level_equals(const struct skl_wm_level *l1, |
| const struct skl_wm_level *l2) |
| { |
| return l1->enable == l2->enable && |
| l1->ignore_lines == l2->ignore_lines && |
| l1->lines == l2->lines && |
| l1->blocks == l2->blocks; |
| } |
| |
| static bool skl_plane_wm_equals(struct drm_i915_private *i915, |
| const struct skl_plane_wm *wm1, |
| const struct skl_plane_wm *wm2) |
| { |
| int level; |
| |
| for (level = 0; level < i915->display.wm.num_levels; level++) { |
| /* |
| * We don't check uv_wm as the hardware doesn't actually |
| * use it. It only gets used for calculating the required |
| * ddb allocation. |
| */ |
| if (!skl_wm_level_equals(&wm1->wm[level], &wm2->wm[level])) |
| return false; |
| } |
| |
| return skl_wm_level_equals(&wm1->trans_wm, &wm2->trans_wm) && |
| skl_wm_level_equals(&wm1->sagv.wm0, &wm2->sagv.wm0) && |
| skl_wm_level_equals(&wm1->sagv.trans_wm, &wm2->sagv.trans_wm); |
| } |
| |
| static bool skl_ddb_entries_overlap(const struct skl_ddb_entry *a, |
| const struct skl_ddb_entry *b) |
| { |
| return a->start < b->end && b->start < a->end; |
| } |
| |
| static void skl_ddb_entry_union(struct skl_ddb_entry *a, |
| const struct skl_ddb_entry *b) |
| { |
| if (a->end && b->end) { |
| a->start = min(a->start, b->start); |
| a->end = max(a->end, b->end); |
| } else if (b->end) { |
| a->start = b->start; |
| a->end = b->end; |
| } |
| } |
| |
| bool skl_ddb_allocation_overlaps(const struct skl_ddb_entry *ddb, |
| const struct skl_ddb_entry *entries, |
| int num_entries, int ignore_idx) |
| { |
| int i; |
| |
| for (i = 0; i < num_entries; i++) { |
| if (i != ignore_idx && |
| skl_ddb_entries_overlap(ddb, &entries[i])) |
| return true; |
| } |
| |
| return false; |
| } |
| |
| static int |
| skl_ddb_add_affected_planes(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| struct drm_i915_private *i915 = to_i915(state->base.dev); |
| const struct intel_crtc_state *old_crtc_state = |
| intel_atomic_get_old_crtc_state(state, crtc); |
| struct intel_crtc_state *new_crtc_state = |
| intel_atomic_get_new_crtc_state(state, crtc); |
| struct intel_plane *plane; |
| |
| for_each_intel_plane_on_crtc(&i915->drm, crtc, plane) { |
| struct intel_plane_state *plane_state; |
| enum plane_id plane_id = plane->id; |
| |
| if (skl_ddb_entry_equal(&old_crtc_state->wm.skl.plane_ddb[plane_id], |
| &new_crtc_state->wm.skl.plane_ddb[plane_id]) && |
| skl_ddb_entry_equal(&old_crtc_state->wm.skl.plane_ddb_y[plane_id], |
| &new_crtc_state->wm.skl.plane_ddb_y[plane_id])) |
| continue; |
| |
| if (new_crtc_state->do_async_flip) { |
| drm_dbg_kms(&i915->drm, "[PLANE:%d:%s] Can't change DDB during async flip\n", |
| plane->base.base.id, plane->base.name); |
| return -EINVAL; |
| } |
| |
| plane_state = intel_atomic_get_plane_state(state, plane); |
| if (IS_ERR(plane_state)) |
| return PTR_ERR(plane_state); |
| |
| new_crtc_state->update_planes |= BIT(plane_id); |
| new_crtc_state->async_flip_planes = 0; |
| new_crtc_state->do_async_flip = false; |
| } |
| |
| return 0; |
| } |
| |
| static u8 intel_dbuf_enabled_slices(const struct intel_dbuf_state *dbuf_state) |
| { |
| struct drm_i915_private *i915 = to_i915(dbuf_state->base.state->base.dev); |
| u8 enabled_slices; |
| enum pipe pipe; |
| |
| /* |
| * FIXME: For now we always enable slice S1 as per |
| * the Bspec display initialization sequence. |
| */ |
| enabled_slices = BIT(DBUF_S1); |
| |
| for_each_pipe(i915, pipe) |
| enabled_slices |= dbuf_state->slices[pipe]; |
| |
| return enabled_slices; |
| } |
| |
| static int |
| skl_compute_ddb(struct intel_atomic_state *state) |
| { |
| struct drm_i915_private *i915 = to_i915(state->base.dev); |
| const struct intel_dbuf_state *old_dbuf_state; |
| struct intel_dbuf_state *new_dbuf_state = NULL; |
| struct intel_crtc_state *new_crtc_state; |
| struct intel_crtc *crtc; |
| int ret, i; |
| |
| for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) { |
| new_dbuf_state = intel_atomic_get_dbuf_state(state); |
| if (IS_ERR(new_dbuf_state)) |
| return PTR_ERR(new_dbuf_state); |
| |
| old_dbuf_state = intel_atomic_get_old_dbuf_state(state); |
| break; |
| } |
| |
| if (!new_dbuf_state) |
| return 0; |
| |
| new_dbuf_state->active_pipes = |
| intel_calc_active_pipes(state, old_dbuf_state->active_pipes); |
| |
| if (old_dbuf_state->active_pipes != new_dbuf_state->active_pipes) { |
| ret = intel_atomic_lock_global_state(&new_dbuf_state->base); |
| if (ret) |
| return ret; |
| } |
| |
| if (HAS_MBUS_JOINING(i915)) { |
| new_dbuf_state->joined_mbus = |
| adlp_check_mbus_joined(new_dbuf_state->active_pipes); |
| |
| if (old_dbuf_state->joined_mbus != new_dbuf_state->joined_mbus) { |
| ret = intel_cdclk_state_set_joined_mbus(state, new_dbuf_state->joined_mbus); |
| if (ret) |
| return ret; |
| } |
| } |
| |
| for_each_intel_crtc(&i915->drm, crtc) { |
| enum pipe pipe = crtc->pipe; |
| |
| new_dbuf_state->slices[pipe] = |
| skl_compute_dbuf_slices(crtc, new_dbuf_state->active_pipes, |
| new_dbuf_state->joined_mbus); |
| |
| if (old_dbuf_state->slices[pipe] == new_dbuf_state->slices[pipe]) |
| continue; |
| |
| ret = intel_atomic_lock_global_state(&new_dbuf_state->base); |
| if (ret) |
| return ret; |
| } |
| |
| new_dbuf_state->enabled_slices = intel_dbuf_enabled_slices(new_dbuf_state); |
| |
| if (old_dbuf_state->enabled_slices != new_dbuf_state->enabled_slices || |
| old_dbuf_state->joined_mbus != new_dbuf_state->joined_mbus) { |
| ret = intel_atomic_serialize_global_state(&new_dbuf_state->base); |
| if (ret) |
| return ret; |
| |
| drm_dbg_kms(&i915->drm, |
| "Enabled dbuf slices 0x%x -> 0x%x (total dbuf slices 0x%x), mbus joined? %s->%s\n", |
| old_dbuf_state->enabled_slices, |
| new_dbuf_state->enabled_slices, |
| DISPLAY_INFO(i915)->dbuf.slice_mask, |
| str_yes_no(old_dbuf_state->joined_mbus), |
| str_yes_no(new_dbuf_state->joined_mbus)); |
| } |
| |
| for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) { |
| enum pipe pipe = crtc->pipe; |
| |
| new_dbuf_state->weight[pipe] = intel_crtc_ddb_weight(new_crtc_state); |
| |
| if (old_dbuf_state->weight[pipe] == new_dbuf_state->weight[pipe]) |
| continue; |
| |
| ret = intel_atomic_lock_global_state(&new_dbuf_state->base); |
| if (ret) |
| return ret; |
| } |
| |
| for_each_intel_crtc(&i915->drm, crtc) { |
| ret = skl_crtc_allocate_ddb(state, crtc); |
| if (ret) |
| return ret; |
| } |
| |
| for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) { |
| ret = skl_crtc_allocate_plane_ddb(state, crtc); |
| if (ret) |
| return ret; |
| |
| ret = skl_ddb_add_affected_planes(state, crtc); |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static char enast(bool enable) |
| { |
| return enable ? '*' : ' '; |
| } |
| |
| static void |
| skl_print_wm_changes(struct intel_atomic_state *state) |
| { |
| struct drm_i915_private *i915 = to_i915(state->base.dev); |
| const struct intel_crtc_state *old_crtc_state; |
| const struct intel_crtc_state *new_crtc_state; |
| struct intel_plane *plane; |
| struct intel_crtc *crtc; |
| int i; |
| |
| if (!drm_debug_enabled(DRM_UT_KMS)) |
| return; |
| |
| for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state, |
| new_crtc_state, i) { |
| const struct skl_pipe_wm *old_pipe_wm, *new_pipe_wm; |
| |
| old_pipe_wm = &old_crtc_state->wm.skl.optimal; |
| new_pipe_wm = &new_crtc_state->wm.skl.optimal; |
| |
| for_each_intel_plane_on_crtc(&i915->drm, crtc, plane) { |
| enum plane_id plane_id = plane->id; |
| const struct skl_ddb_entry *old, *new; |
| |
| old = &old_crtc_state->wm.skl.plane_ddb[plane_id]; |
| new = &new_crtc_state->wm.skl.plane_ddb[plane_id]; |
| |
| if (skl_ddb_entry_equal(old, new)) |
| continue; |
| |
| drm_dbg_kms(&i915->drm, |
| "[PLANE:%d:%s] ddb (%4d - %4d) -> (%4d - %4d), size %4d -> %4d\n", |
| plane->base.base.id, plane->base.name, |
| old->start, old->end, new->start, new->end, |
| skl_ddb_entry_size(old), skl_ddb_entry_size(new)); |
| } |
| |
| for_each_intel_plane_on_crtc(&i915->drm, crtc, plane) { |
| enum plane_id plane_id = plane->id; |
| const struct skl_plane_wm *old_wm, *new_wm; |
| |
| old_wm = &old_pipe_wm->planes[plane_id]; |
| new_wm = &new_pipe_wm->planes[plane_id]; |
| |
| if (skl_plane_wm_equals(i915, old_wm, new_wm)) |
| continue; |
| |
| drm_dbg_kms(&i915->drm, |
| "[PLANE:%d:%s] level %cwm0,%cwm1,%cwm2,%cwm3,%cwm4,%cwm5,%cwm6,%cwm7,%ctwm,%cswm,%cstwm" |
| " -> %cwm0,%cwm1,%cwm2,%cwm3,%cwm4,%cwm5,%cwm6,%cwm7,%ctwm,%cswm,%cstwm\n", |
| plane->base.base.id, plane->base.name, |
| enast(old_wm->wm[0].enable), enast(old_wm->wm[1].enable), |
| enast(old_wm->wm[2].enable), enast(old_wm->wm[3].enable), |
| enast(old_wm->wm[4].enable), enast(old_wm->wm[5].enable), |
| enast(old_wm->wm[6].enable), enast(old_wm->wm[7].enable), |
| enast(old_wm->trans_wm.enable), |
| enast(old_wm->sagv.wm0.enable), |
| enast(old_wm->sagv.trans_wm.enable), |
| enast(new_wm->wm[0].enable), enast(new_wm->wm[1].enable), |
| enast(new_wm->wm[2].enable), enast(new_wm->wm[3].enable), |
| enast(new_wm->wm[4].enable), enast(new_wm->wm[5].enable), |
| enast(new_wm->wm[6].enable), enast(new_wm->wm[7].enable), |
| enast(new_wm->trans_wm.enable), |
| enast(new_wm->sagv.wm0.enable), |
| enast(new_wm->sagv.trans_wm.enable)); |
| |
| drm_dbg_kms(&i915->drm, |
| "[PLANE:%d:%s] lines %c%3d,%c%3d,%c%3d,%c%3d,%c%3d,%c%3d,%c%3d,%c%3d,%c%3d,%c%3d,%c%4d" |
| " -> %c%3d,%c%3d,%c%3d,%c%3d,%c%3d,%c%3d,%c%3d,%c%3d,%c%3d,%c%3d,%c%4d\n", |
| plane->base.base.id, plane->base.name, |
| enast(old_wm->wm[0].ignore_lines), old_wm->wm[0].lines, |
| enast(old_wm->wm[1].ignore_lines), old_wm->wm[1].lines, |
| enast(old_wm->wm[2].ignore_lines), old_wm->wm[2].lines, |
| enast(old_wm->wm[3].ignore_lines), old_wm->wm[3].lines, |
| enast(old_wm->wm[4].ignore_lines), old_wm->wm[4].lines, |
| enast(old_wm->wm[5].ignore_lines), old_wm->wm[5].lines, |
| enast(old_wm->wm[6].ignore_lines), old_wm->wm[6].lines, |
| enast(old_wm->wm[7].ignore_lines), old_wm->wm[7].lines, |
| enast(old_wm->trans_wm.ignore_lines), old_wm->trans_wm.lines, |
| enast(old_wm->sagv.wm0.ignore_lines), old_wm->sagv.wm0.lines, |
| enast(old_wm->sagv.trans_wm.ignore_lines), old_wm->sagv.trans_wm.lines, |
| enast(new_wm->wm[0].ignore_lines), new_wm->wm[0].lines, |
| enast(new_wm->wm[1].ignore_lines), new_wm->wm[1].lines, |
| enast(new_wm->wm[2].ignore_lines), new_wm->wm[2].lines, |
| enast(new_wm->wm[3].ignore_lines), new_wm->wm[3].lines, |
| enast(new_wm->wm[4].ignore_lines), new_wm->wm[4].lines, |
| enast(new_wm->wm[5].ignore_lines), new_wm->wm[5].lines, |
| enast(new_wm->wm[6].ignore_lines), new_wm->wm[6].lines, |
| enast(new_wm->wm[7].ignore_lines), new_wm->wm[7].lines, |
| enast(new_wm->trans_wm.ignore_lines), new_wm->trans_wm.lines, |
| enast(new_wm->sagv.wm0.ignore_lines), new_wm->sagv.wm0.lines, |
| enast(new_wm->sagv.trans_wm.ignore_lines), new_wm->sagv.trans_wm.lines); |
| |
| drm_dbg_kms(&i915->drm, |
| "[PLANE:%d:%s] blocks %4d,%4d,%4d,%4d,%4d,%4d,%4d,%4d,%4d,%4d,%5d" |
| " -> %4d,%4d,%4d,%4d,%4d,%4d,%4d,%4d,%4d,%4d,%5d\n", |
| plane->base.base.id, plane->base.name, |
| old_wm->wm[0].blocks, old_wm->wm[1].blocks, |
| old_wm->wm[2].blocks, old_wm->wm[3].blocks, |
| old_wm->wm[4].blocks, old_wm->wm[5].blocks, |
| old_wm->wm[6].blocks, old_wm->wm[7].blocks, |
| old_wm->trans_wm.blocks, |
| old_wm->sagv.wm0.blocks, |
| old_wm->sagv.trans_wm.blocks, |
| new_wm->wm[0].blocks, new_wm->wm[1].blocks, |
| new_wm->wm[2].blocks, new_wm->wm[3].blocks, |
| new_wm->wm[4].blocks, new_wm->wm[5].blocks, |
| new_wm->wm[6].blocks, new_wm->wm[7].blocks, |
| new_wm->trans_wm.blocks, |
| new_wm->sagv.wm0.blocks, |
| new_wm->sagv.trans_wm.blocks); |
| |
| drm_dbg_kms(&i915->drm, |
| "[PLANE:%d:%s] min_ddb %4d,%4d,%4d,%4d,%4d,%4d,%4d,%4d,%4d,%4d,%5d" |
| " -> %4d,%4d,%4d,%4d,%4d,%4d,%4d,%4d,%4d,%4d,%5d\n", |
| plane->base.base.id, plane->base.name, |
| old_wm->wm[0].min_ddb_alloc, old_wm->wm[1].min_ddb_alloc, |
| old_wm->wm[2].min_ddb_alloc, old_wm->wm[3].min_ddb_alloc, |
| old_wm->wm[4].min_ddb_alloc, old_wm->wm[5].min_ddb_alloc, |
| old_wm->wm[6].min_ddb_alloc, old_wm->wm[7].min_ddb_alloc, |
| old_wm->trans_wm.min_ddb_alloc, |
| old_wm->sagv.wm0.min_ddb_alloc, |
| old_wm->sagv.trans_wm.min_ddb_alloc, |
| new_wm->wm[0].min_ddb_alloc, new_wm->wm[1].min_ddb_alloc, |
| new_wm->wm[2].min_ddb_alloc, new_wm->wm[3].min_ddb_alloc, |
| new_wm->wm[4].min_ddb_alloc, new_wm->wm[5].min_ddb_alloc, |
| new_wm->wm[6].min_ddb_alloc, new_wm->wm[7].min_ddb_alloc, |
| new_wm->trans_wm.min_ddb_alloc, |
| new_wm->sagv.wm0.min_ddb_alloc, |
| new_wm->sagv.trans_wm.min_ddb_alloc); |
| } |
| } |
| } |
| |
| static bool skl_plane_selected_wm_equals(struct intel_plane *plane, |
| const struct skl_pipe_wm *old_pipe_wm, |
| const struct skl_pipe_wm *new_pipe_wm) |
| { |
| struct drm_i915_private *i915 = to_i915(plane->base.dev); |
| int level; |
| |
| for (level = 0; level < i915->display.wm.num_levels; level++) { |
| /* |
| * We don't check uv_wm as the hardware doesn't actually |
| * use it. It only gets used for calculating the required |
| * ddb allocation. |
| */ |
| if (!skl_wm_level_equals(skl_plane_wm_level(old_pipe_wm, plane->id, level), |
| skl_plane_wm_level(new_pipe_wm, plane->id, level))) |
| return false; |
| } |
| |
| if (HAS_HW_SAGV_WM(i915)) { |
| const struct skl_plane_wm *old_wm = &old_pipe_wm->planes[plane->id]; |
| const struct skl_plane_wm *new_wm = &new_pipe_wm->planes[plane->id]; |
| |
| if (!skl_wm_level_equals(&old_wm->sagv.wm0, &new_wm->sagv.wm0) || |
| !skl_wm_level_equals(&old_wm->sagv.trans_wm, &new_wm->sagv.trans_wm)) |
| return false; |
| } |
| |
| return skl_wm_level_equals(skl_plane_trans_wm(old_pipe_wm, plane->id), |
| skl_plane_trans_wm(new_pipe_wm, plane->id)); |
| } |
| |
| /* |
| * To make sure the cursor watermark registers are always consistent |
| * with our computed state the following scenario needs special |
| * treatment: |
| * |
| * 1. enable cursor |
| * 2. move cursor entirely offscreen |
| * 3. disable cursor |
| * |
| * Step 2. does call .disable_plane() but does not zero the watermarks |
| * (since we consider an offscreen cursor still active for the purposes |
| * of watermarks). Step 3. would not normally call .disable_plane() |
| * because the actual plane visibility isn't changing, and we don't |
| * deallocate the cursor ddb until the pipe gets disabled. So we must |
| * force step 3. to call .disable_plane() to update the watermark |
| * registers properly. |
| * |
| * Other planes do not suffer from this issues as their watermarks are |
| * calculated based on the actual plane visibility. The only time this |
| * can trigger for the other planes is during the initial readout as the |
| * default value of the watermarks registers is not zero. |
| */ |
| static int skl_wm_add_affected_planes(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| struct drm_i915_private *i915 = to_i915(crtc->base.dev); |
| const struct intel_crtc_state *old_crtc_state = |
| intel_atomic_get_old_crtc_state(state, crtc); |
| struct intel_crtc_state *new_crtc_state = |
| intel_atomic_get_new_crtc_state(state, crtc); |
| struct intel_plane *plane; |
| |
| for_each_intel_plane_on_crtc(&i915->drm, crtc, plane) { |
| struct intel_plane_state *plane_state; |
| enum plane_id plane_id = plane->id; |
| |
| /* |
| * Force a full wm update for every plane on modeset. |
| * Required because the reset value of the wm registers |
| * is non-zero, whereas we want all disabled planes to |
| * have zero watermarks. So if we turn off the relevant |
| * power well the hardware state will go out of sync |
| * with the software state. |
| */ |
| if (!intel_crtc_needs_modeset(new_crtc_state) && |
| skl_plane_selected_wm_equals(plane, |
| &old_crtc_state->wm.skl.optimal, |
| &new_crtc_state->wm.skl.optimal)) |
| continue; |
| |
| if (new_crtc_state->do_async_flip) { |
| drm_dbg_kms(&i915->drm, "[PLANE:%d:%s] Can't change watermarks during async flip\n", |
| plane->base.base.id, plane->base.name); |
| return -EINVAL; |
| } |
| |
| plane_state = intel_atomic_get_plane_state(state, plane); |
| if (IS_ERR(plane_state)) |
| return PTR_ERR(plane_state); |
| |
| new_crtc_state->update_planes |= BIT(plane_id); |
| new_crtc_state->async_flip_planes = 0; |
| new_crtc_state->do_async_flip = false; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * If Fixed Refresh Rate or For VRR case Vmin = Vmax = Flipline: |
| * Program DEEP PKG_C_LATENCY Pkg C with highest valid latency from |
| * watermark level1 and up and above. If watermark level 1 is |
| * invalid program it with all 1's. |
| * Program PKG_C_LATENCY Added Wake Time = DSB execution time |
| * If Variable Refresh Rate where Vmin != Vmax != Flipline: |
| * Program DEEP PKG_C_LATENCY Pkg C with all 1's. |
| * Program PKG_C_LATENCY Added Wake Time = 0 |
| */ |
| static void |
| skl_program_dpkgc_latency(struct drm_i915_private *i915, bool enable_dpkgc) |
| { |
| u32 max_latency = 0; |
| u32 clear = 0, val = 0; |
| u32 added_wake_time = 0; |
| |
| if (DISPLAY_VER(i915) < 20) |
| return; |
| |
| if (enable_dpkgc) { |
| max_latency = skl_watermark_max_latency(i915, 1); |
| if (max_latency == 0) |
| max_latency = LNL_PKG_C_LATENCY_MASK; |
| added_wake_time = DSB_EXE_TIME + |
| i915->display.sagv.block_time_us; |
| } else { |
| max_latency = LNL_PKG_C_LATENCY_MASK; |
| added_wake_time = 0; |
| } |
| |
| clear |= LNL_ADDED_WAKE_TIME_MASK | LNL_PKG_C_LATENCY_MASK; |
| val |= REG_FIELD_PREP(LNL_PKG_C_LATENCY_MASK, max_latency); |
| val |= REG_FIELD_PREP(LNL_ADDED_WAKE_TIME_MASK, added_wake_time); |
| |
| intel_uncore_rmw(&i915->uncore, LNL_PKG_C_LATENCY, clear, val); |
| } |
| |
| static int |
| skl_compute_wm(struct intel_atomic_state *state) |
| { |
| struct intel_crtc *crtc; |
| struct intel_crtc_state __maybe_unused *new_crtc_state; |
| int ret, i; |
| bool enable_dpkgc = false; |
| |
| for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) { |
| ret = skl_build_pipe_wm(state, crtc); |
| if (ret) |
| return ret; |
| } |
| |
| ret = skl_compute_ddb(state); |
| if (ret) |
| return ret; |
| |
| ret = intel_compute_sagv_mask(state); |
| if (ret) |
| return ret; |
| |
| /* |
| * skl_compute_ddb() will have adjusted the final watermarks |
| * based on how much ddb is available. Now we can actually |
| * check if the final watermarks changed. |
| */ |
| for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) { |
| ret = skl_wm_add_affected_planes(state, crtc); |
| if (ret) |
| return ret; |
| |
| if ((new_crtc_state->vrr.vmin == new_crtc_state->vrr.vmax && |
| new_crtc_state->vrr.vmin == new_crtc_state->vrr.flipline) || |
| !new_crtc_state->vrr.enable) |
| enable_dpkgc = true; |
| } |
| |
| skl_program_dpkgc_latency(to_i915(state->base.dev), enable_dpkgc); |
| |
| skl_print_wm_changes(state); |
| |
| return 0; |
| } |
| |
| static void skl_wm_level_from_reg_val(u32 val, struct skl_wm_level *level) |
| { |
| level->enable = val & PLANE_WM_EN; |
| level->ignore_lines = val & PLANE_WM_IGNORE_LINES; |
| level->blocks = REG_FIELD_GET(PLANE_WM_BLOCKS_MASK, val); |
| level->lines = REG_FIELD_GET(PLANE_WM_LINES_MASK, val); |
| } |
| |
| static void skl_pipe_wm_get_hw_state(struct intel_crtc *crtc, |
| struct skl_pipe_wm *out) |
| { |
| struct drm_i915_private *i915 = to_i915(crtc->base.dev); |
| enum pipe pipe = crtc->pipe; |
| enum plane_id plane_id; |
| int level; |
| u32 val; |
| |
| for_each_plane_id_on_crtc(crtc, plane_id) { |
| struct skl_plane_wm *wm = &out->planes[plane_id]; |
| |
| for (level = 0; level < i915->display.wm.num_levels; level++) { |
| if (plane_id != PLANE_CURSOR) |
| val = intel_de_read(i915, PLANE_WM(pipe, plane_id, level)); |
| else |
| val = intel_de_read(i915, CUR_WM(pipe, level)); |
| |
| skl_wm_level_from_reg_val(val, &wm->wm[level]); |
| } |
| |
| if (plane_id != PLANE_CURSOR) |
| val = intel_de_read(i915, PLANE_WM_TRANS(pipe, plane_id)); |
| else |
| val = intel_de_read(i915, CUR_WM_TRANS(pipe)); |
| |
| skl_wm_level_from_reg_val(val, &wm->trans_wm); |
| |
| if (HAS_HW_SAGV_WM(i915)) { |
| if (plane_id != PLANE_CURSOR) |
| val = intel_de_read(i915, PLANE_WM_SAGV(pipe, plane_id)); |
| else |
| val = intel_de_read(i915, CUR_WM_SAGV(pipe)); |
| |
| skl_wm_level_from_reg_val(val, &wm->sagv.wm0); |
| |
| if (plane_id != PLANE_CURSOR) |
| val = intel_de_read(i915, PLANE_WM_SAGV_TRANS(pipe, plane_id)); |
| else |
| val = intel_de_read(i915, CUR_WM_SAGV_TRANS(pipe)); |
| |
| skl_wm_level_from_reg_val(val, &wm->sagv.trans_wm); |
| } else if (DISPLAY_VER(i915) >= 12) { |
| wm->sagv.wm0 = wm->wm[0]; |
| wm->sagv.trans_wm = wm->trans_wm; |
| } |
| } |
| } |
| |
| static void skl_wm_get_hw_state(struct drm_i915_private *i915) |
| { |
| struct intel_dbuf_state *dbuf_state = |
| to_intel_dbuf_state(i915->display.dbuf.obj.state); |
| struct intel_crtc *crtc; |
| |
| if (HAS_MBUS_JOINING(i915)) |
| dbuf_state->joined_mbus = intel_de_read(i915, MBUS_CTL) & MBUS_JOIN; |
| |
| dbuf_state->mdclk_cdclk_ratio = intel_mdclk_cdclk_ratio(i915, &i915->display.cdclk.hw); |
| |
| for_each_intel_crtc(&i915->drm, crtc) { |
| struct intel_crtc_state *crtc_state = |
| to_intel_crtc_state(crtc->base.state); |
| enum pipe pipe = crtc->pipe; |
| unsigned int mbus_offset; |
| enum plane_id plane_id; |
| u8 slices; |
| |
| memset(&crtc_state->wm.skl.optimal, 0, |
| sizeof(crtc_state->wm.skl.optimal)); |
| if (crtc_state->hw.active) |
| skl_pipe_wm_get_hw_state(crtc, &crtc_state->wm.skl.optimal); |
| crtc_state->wm.skl.raw = crtc_state->wm.skl.optimal; |
| |
| memset(&dbuf_state->ddb[pipe], 0, sizeof(dbuf_state->ddb[pipe])); |
| |
| for_each_plane_id_on_crtc(crtc, plane_id) { |
| struct skl_ddb_entry *ddb = |
| &crtc_state->wm.skl.plane_ddb[plane_id]; |
| struct skl_ddb_entry *ddb_y = |
| &crtc_state->wm.skl.plane_ddb_y[plane_id]; |
| |
| if (!crtc_state->hw.active) |
| continue; |
| |
| skl_ddb_get_hw_plane_state(i915, crtc->pipe, |
| plane_id, ddb, ddb_y); |
| |
| skl_ddb_entry_union(&dbuf_state->ddb[pipe], ddb); |
| skl_ddb_entry_union(&dbuf_state->ddb[pipe], ddb_y); |
| } |
| |
| dbuf_state->weight[pipe] = intel_crtc_ddb_weight(crtc_state); |
| |
| /* |
| * Used for checking overlaps, so we need absolute |
| * offsets instead of MBUS relative offsets. |
| */ |
| slices = skl_compute_dbuf_slices(crtc, dbuf_state->active_pipes, |
| dbuf_state->joined_mbus); |
| mbus_offset = mbus_ddb_offset(i915, slices); |
| crtc_state->wm.skl.ddb.start = mbus_offset + dbuf_state->ddb[pipe].start; |
| crtc_state->wm.skl.ddb.end = mbus_offset + dbuf_state->ddb[pipe].end; |
| |
| /* The slices actually used by the planes on the pipe */ |
| dbuf_state->slices[pipe] = |
| skl_ddb_dbuf_slice_mask(i915, &crtc_state->wm.skl.ddb); |
| |
| drm_dbg_kms(&i915->drm, |
| "[CRTC:%d:%s] dbuf slices 0x%x, ddb (%d - %d), active pipes 0x%x, mbus joined: %s\n", |
| crtc->base.base.id, crtc->base.name, |
| dbuf_state->slices[pipe], dbuf_state->ddb[pipe].start, |
| dbuf_state->ddb[pipe].end, dbuf_state->active_pipes, |
| str_yes_no(dbuf_state->joined_mbus)); |
| } |
| |
| dbuf_state->enabled_slices = i915->display.dbuf.enabled_slices; |
| } |
| |
| static bool skl_dbuf_is_misconfigured(struct drm_i915_private *i915) |
| { |
| const struct intel_dbuf_state *dbuf_state = |
| to_intel_dbuf_state(i915->display.dbuf.obj.state); |
| struct skl_ddb_entry entries[I915_MAX_PIPES] = {}; |
| struct intel_crtc *crtc; |
| |
| for_each_intel_crtc(&i915->drm, crtc) { |
| const struct intel_crtc_state *crtc_state = |
| to_intel_crtc_state(crtc->base.state); |
| |
| entries[crtc->pipe] = crtc_state->wm.skl.ddb; |
| } |
| |
| for_each_intel_crtc(&i915->drm, crtc) { |
| const struct intel_crtc_state *crtc_state = |
| to_intel_crtc_state(crtc->base.state); |
| u8 slices; |
| |
| slices = skl_compute_dbuf_slices(crtc, dbuf_state->active_pipes, |
| dbuf_state->joined_mbus); |
| if (dbuf_state->slices[crtc->pipe] & ~slices) |
| return true; |
| |
| if (skl_ddb_allocation_overlaps(&crtc_state->wm.skl.ddb, entries, |
| I915_MAX_PIPES, crtc->pipe)) |
| return true; |
| } |
| |
| return false; |
| } |
| |
| static void skl_wm_sanitize(struct drm_i915_private *i915) |
| { |
| struct intel_crtc *crtc; |
| |
| /* |
| * On TGL/RKL (at least) the BIOS likes to assign the planes |
| * to the wrong DBUF slices. This will cause an infinite loop |
| * in skl_commit_modeset_enables() as it can't find a way to |
| * transition between the old bogus DBUF layout to the new |
| * proper DBUF layout without DBUF allocation overlaps between |
| * the planes (which cannot be allowed or else the hardware |
| * may hang). If we detect a bogus DBUF layout just turn off |
| * all the planes so that skl_commit_modeset_enables() can |
| * simply ignore them. |
| */ |
| if (!skl_dbuf_is_misconfigured(i915)) |
| return; |
| |
| drm_dbg_kms(&i915->drm, "BIOS has misprogrammed the DBUF, disabling all planes\n"); |
| |
| for_each_intel_crtc(&i915->drm, crtc) { |
| struct intel_plane *plane = to_intel_plane(crtc->base.primary); |
| const struct intel_plane_state *plane_state = |
| to_intel_plane_state(plane->base.state); |
| struct intel_crtc_state *crtc_state = |
| to_intel_crtc_state(crtc->base.state); |
| |
| if (plane_state->uapi.visible) |
| intel_plane_disable_noatomic(crtc, plane); |
| |
| drm_WARN_ON(&i915->drm, crtc_state->active_planes != 0); |
| |
| memset(&crtc_state->wm.skl.ddb, 0, sizeof(crtc_state->wm.skl.ddb)); |
| } |
| } |
| |
| static void skl_wm_get_hw_state_and_sanitize(struct drm_i915_private *i915) |
| { |
| skl_wm_get_hw_state(i915); |
| skl_wm_sanitize(i915); |
| } |
| |
| void intel_wm_state_verify(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| struct drm_i915_private *i915 = to_i915(state->base.dev); |
| const struct intel_crtc_state *new_crtc_state = |
| intel_atomic_get_new_crtc_state(state, crtc); |
| struct skl_hw_state { |
| struct skl_ddb_entry ddb[I915_MAX_PLANES]; |
| struct skl_ddb_entry ddb_y[I915_MAX_PLANES]; |
| struct skl_pipe_wm wm; |
| } *hw; |
| const struct skl_pipe_wm *sw_wm = &new_crtc_state->wm.skl.optimal; |
| struct intel_plane *plane; |
| u8 hw_enabled_slices; |
| int level; |
| |
| if (DISPLAY_VER(i915) < 9 || !new_crtc_state->hw.active) |
| return; |
| |
| hw = kzalloc(sizeof(*hw), GFP_KERNEL); |
| if (!hw) |
| return; |
| |
| skl_pipe_wm_get_hw_state(crtc, &hw->wm); |
| |
| skl_pipe_ddb_get_hw_state(crtc, hw->ddb, hw->ddb_y); |
| |
| hw_enabled_slices = intel_enabled_dbuf_slices_mask(i915); |
| |
| if (DISPLAY_VER(i915) >= 11 && |
| hw_enabled_slices != i915->display.dbuf.enabled_slices) |
| drm_err(&i915->drm, |
| "mismatch in DBUF Slices (expected 0x%x, got 0x%x)\n", |
| i915->display.dbuf.enabled_slices, |
| hw_enabled_slices); |
| |
| for_each_intel_plane_on_crtc(&i915->drm, crtc, plane) { |
| const struct skl_ddb_entry *hw_ddb_entry, *sw_ddb_entry; |
| const struct skl_wm_level *hw_wm_level, *sw_wm_level; |
| |
| /* Watermarks */ |
| for (level = 0; level < i915->display.wm.num_levels; level++) { |
| hw_wm_level = &hw->wm.planes[plane->id].wm[level]; |
| sw_wm_level = skl_plane_wm_level(sw_wm, plane->id, level); |
| |
| if (skl_wm_level_equals(hw_wm_level, sw_wm_level)) |
| continue; |
| |
| drm_err(&i915->drm, |
| "[PLANE:%d:%s] mismatch in WM%d (expected e=%d b=%u l=%u, got e=%d b=%u l=%u)\n", |
| plane->base.base.id, plane->base.name, level, |
| sw_wm_level->enable, |
| sw_wm_level->blocks, |
| sw_wm_level->lines, |
| hw_wm_level->enable, |
| hw_wm_level->blocks, |
| hw_wm_level->lines); |
| } |
| |
| hw_wm_level = &hw->wm.planes[plane->id].trans_wm; |
| sw_wm_level = skl_plane_trans_wm(sw_wm, plane->id); |
| |
| if (!skl_wm_level_equals(hw_wm_level, sw_wm_level)) { |
| drm_err(&i915->drm, |
| "[PLANE:%d:%s] mismatch in trans WM (expected e=%d b=%u l=%u, got e=%d b=%u l=%u)\n", |
| plane->base.base.id, plane->base.name, |
| sw_wm_level->enable, |
| sw_wm_level->blocks, |
| sw_wm_level->lines, |
| hw_wm_level->enable, |
| hw_wm_level->blocks, |
| hw_wm_level->lines); |
| } |
| |
| hw_wm_level = &hw->wm.planes[plane->id].sagv.wm0; |
| sw_wm_level = &sw_wm->planes[plane->id].sagv.wm0; |
| |
| if (HAS_HW_SAGV_WM(i915) && |
| !skl_wm_level_equals(hw_wm_level, sw_wm_level)) { |
| drm_err(&i915->drm, |
| "[PLANE:%d:%s] mismatch in SAGV WM (expected e=%d b=%u l=%u, got e=%d b=%u l=%u)\n", |
| plane->base.base.id, plane->base.name, |
| sw_wm_level->enable, |
| sw_wm_level->blocks, |
| sw_wm_level->lines, |
| hw_wm_level->enable, |
| hw_wm_level->blocks, |
| hw_wm_level->lines); |
| } |
| |
| hw_wm_level = &hw->wm.planes[plane->id].sagv.trans_wm; |
| sw_wm_level = &sw_wm->planes[plane->id].sagv.trans_wm; |
| |
| if (HAS_HW_SAGV_WM(i915) && |
| !skl_wm_level_equals(hw_wm_level, sw_wm_level)) { |
| drm_err(&i915->drm, |
| "[PLANE:%d:%s] mismatch in SAGV trans WM (expected e=%d b=%u l=%u, got e=%d b=%u l=%u)\n", |
| plane->base.base.id, plane->base.name, |
| sw_wm_level->enable, |
| sw_wm_level->blocks, |
| sw_wm_level->lines, |
| hw_wm_level->enable, |
| hw_wm_level->blocks, |
| hw_wm_level->lines); |
| } |
| |
| /* DDB */ |
| hw_ddb_entry = &hw->ddb[PLANE_CURSOR]; |
| sw_ddb_entry = &new_crtc_state->wm.skl.plane_ddb[PLANE_CURSOR]; |
| |
| if (!skl_ddb_entry_equal(hw_ddb_entry, sw_ddb_entry)) { |
| drm_err(&i915->drm, |
| "[PLANE:%d:%s] mismatch in DDB (expected (%u,%u), found (%u,%u))\n", |
| plane->base.base.id, plane->base.name, |
| sw_ddb_entry->start, sw_ddb_entry->end, |
| hw_ddb_entry->start, hw_ddb_entry->end); |
| } |
| } |
| |
| kfree(hw); |
| } |
| |
| bool skl_watermark_ipc_enabled(struct drm_i915_private *i915) |
| { |
| return i915->display.wm.ipc_enabled; |
| } |
| |
| void skl_watermark_ipc_update(struct drm_i915_private *i915) |
| { |
| if (!HAS_IPC(i915)) |
| return; |
| |
| intel_de_rmw(i915, DISP_ARB_CTL2, DISP_IPC_ENABLE, |
| skl_watermark_ipc_enabled(i915) ? DISP_IPC_ENABLE : 0); |
| } |
| |
| static bool skl_watermark_ipc_can_enable(struct drm_i915_private *i915) |
| { |
| /* Display WA #0477 WaDisableIPC: skl */ |
| if (IS_SKYLAKE(i915)) |
| return false; |
| |
| /* Display WA #1141: SKL:all KBL:all CFL */ |
| if (IS_KABYLAKE(i915) || |
| IS_COFFEELAKE(i915) || |
| IS_COMETLAKE(i915)) |
| return i915->dram_info.symmetric_memory; |
| |
| return true; |
| } |
| |
| void skl_watermark_ipc_init(struct drm_i915_private *i915) |
| { |
| if (!HAS_IPC(i915)) |
| return; |
| |
| i915->display.wm.ipc_enabled = skl_watermark_ipc_can_enable(i915); |
| |
| skl_watermark_ipc_update(i915); |
| } |
| |
| static void |
| adjust_wm_latency(struct drm_i915_private *i915, |
| u16 wm[], int num_levels, int read_latency) |
| { |
| bool wm_lv_0_adjust_needed = i915->dram_info.wm_lv_0_adjust_needed; |
| int i, level; |
| |
| /* |
| * If a level n (n > 1) has a 0us latency, all levels m (m >= n) |
| * need to be disabled. We make sure to sanitize the values out |
| * of the punit to satisfy this requirement. |
| */ |
| for (level = 1; level < num_levels; level++) { |
| if (wm[level] == 0) { |
| for (i = level + 1; i < num_levels; i++) |
| wm[i] = 0; |
| |
| num_levels = level; |
| break; |
| } |
| } |
| |
| /* |
| * WaWmMemoryReadLatency |
| * |
| * punit doesn't take into account the read latency so we need |
| * to add proper adjustement to each valid level we retrieve |
| * from the punit when level 0 response data is 0us. |
| */ |
| if (wm[0] == 0) { |
| for (level = 0; level < num_levels; level++) |
| wm[level] += read_latency; |
| } |
| |
| /* |
| * WA Level-0 adjustment for 16GB DIMMs: SKL+ |
| * If we could not get dimm info enable this WA to prevent from |
| * any underrun. If not able to get Dimm info assume 16GB dimm |
| * to avoid any underrun. |
| */ |
| if (wm_lv_0_adjust_needed) |
| wm[0] += 1; |
| } |
| |
| static void mtl_read_wm_latency(struct drm_i915_private *i915, u16 wm[]) |
| { |
| int num_levels = i915->display.wm.num_levels; |
| u32 val; |
| |
| val = intel_de_read(i915, MTL_LATENCY_LP0_LP1); |
| wm[0] = REG_FIELD_GET(MTL_LATENCY_LEVEL_EVEN_MASK, val); |
| wm[1] = REG_FIELD_GET(MTL_LATENCY_LEVEL_ODD_MASK, val); |
| |
| val = intel_de_read(i915, MTL_LATENCY_LP2_LP3); |
| wm[2] = REG_FIELD_GET(MTL_LATENCY_LEVEL_EVEN_MASK, val); |
| wm[3] = REG_FIELD_GET(MTL_LATENCY_LEVEL_ODD_MASK, val); |
| |
| val = intel_de_read(i915, MTL_LATENCY_LP4_LP5); |
| wm[4] = REG_FIELD_GET(MTL_LATENCY_LEVEL_EVEN_MASK, val); |
| wm[5] = REG_FIELD_GET(MTL_LATENCY_LEVEL_ODD_MASK, val); |
| |
| adjust_wm_latency(i915, wm, num_levels, 6); |
| } |
| |
| static void skl_read_wm_latency(struct drm_i915_private *i915, u16 wm[]) |
| { |
| int num_levels = i915->display.wm.num_levels; |
| int read_latency = DISPLAY_VER(i915) >= 12 ? 3 : 2; |
| int mult = IS_DG2(i915) ? 2 : 1; |
| u32 val; |
| int ret; |
| |
| /* read the first set of memory latencies[0:3] */ |
| val = 0; /* data0 to be programmed to 0 for first set */ |
| ret = snb_pcode_read(&i915->uncore, GEN9_PCODE_READ_MEM_LATENCY, &val, NULL); |
| if (ret) { |
| drm_err(&i915->drm, "SKL Mailbox read error = %d\n", ret); |
| return; |
| } |
| |
| wm[0] = REG_FIELD_GET(GEN9_MEM_LATENCY_LEVEL_0_4_MASK, val) * mult; |
| wm[1] = REG_FIELD_GET(GEN9_MEM_LATENCY_LEVEL_1_5_MASK, val) * mult; |
| wm[2] = REG_FIELD_GET(GEN9_MEM_LATENCY_LEVEL_2_6_MASK, val) * mult; |
| wm[3] = REG_FIELD_GET(GEN9_MEM_LATENCY_LEVEL_3_7_MASK, val) * mult; |
| |
| /* read the second set of memory latencies[4:7] */ |
| val = 1; /* data0 to be programmed to 1 for second set */ |
| ret = snb_pcode_read(&i915->uncore, GEN9_PCODE_READ_MEM_LATENCY, &val, NULL); |
| if (ret) { |
| drm_err(&i915->drm, "SKL Mailbox read error = %d\n", ret); |
| return; |
| } |
| |
| wm[4] = REG_FIELD_GET(GEN9_MEM_LATENCY_LEVEL_0_4_MASK, val) * mult; |
| wm[5] = REG_FIELD_GET(GEN9_MEM_LATENCY_LEVEL_1_5_MASK, val) * mult; |
| wm[6] = REG_FIELD_GET(GEN9_MEM_LATENCY_LEVEL_2_6_MASK, val) * mult; |
| wm[7] = REG_FIELD_GET(GEN9_MEM_LATENCY_LEVEL_3_7_MASK, val) * mult; |
| |
| adjust_wm_latency(i915, wm, num_levels, read_latency); |
| } |
| |
| static void skl_setup_wm_latency(struct drm_i915_private *i915) |
| { |
| if (HAS_HW_SAGV_WM(i915)) |
| i915->display.wm.num_levels = 6; |
| else |
| i915->display.wm.num_levels = 8; |
| |
| if (DISPLAY_VER(i915) >= 14) |
| mtl_read_wm_latency(i915, i915->display.wm.skl_latency); |
| else |
| skl_read_wm_latency(i915, i915->display.wm.skl_latency); |
| |
| intel_print_wm_latency(i915, "Gen9 Plane", i915->display.wm.skl_latency); |
| } |
| |
| static const struct intel_wm_funcs skl_wm_funcs = { |
| .compute_global_watermarks = skl_compute_wm, |
| .get_hw_state = skl_wm_get_hw_state_and_sanitize, |
| }; |
| |
| void skl_wm_init(struct drm_i915_private *i915) |
| { |
| intel_sagv_init(i915); |
| |
| skl_setup_wm_latency(i915); |
| |
| i915->display.funcs.wm = &skl_wm_funcs; |
| } |
| |
| static struct intel_global_state *intel_dbuf_duplicate_state(struct intel_global_obj *obj) |
| { |
| struct intel_dbuf_state *dbuf_state; |
| |
| dbuf_state = kmemdup(obj->state, sizeof(*dbuf_state), GFP_KERNEL); |
| if (!dbuf_state) |
| return NULL; |
| |
| return &dbuf_state->base; |
| } |
| |
| static void intel_dbuf_destroy_state(struct intel_global_obj *obj, |
| struct intel_global_state *state) |
| { |
| kfree(state); |
| } |
| |
| static const struct intel_global_state_funcs intel_dbuf_funcs = { |
| .atomic_duplicate_state = intel_dbuf_duplicate_state, |
| .atomic_destroy_state = intel_dbuf_destroy_state, |
| }; |
| |
| struct intel_dbuf_state * |
| intel_atomic_get_dbuf_state(struct intel_atomic_state *state) |
| { |
| struct drm_i915_private *i915 = to_i915(state->base.dev); |
| struct intel_global_state *dbuf_state; |
| |
| dbuf_state = intel_atomic_get_global_obj_state(state, &i915->display.dbuf.obj); |
| if (IS_ERR(dbuf_state)) |
| return ERR_CAST(dbuf_state); |
| |
| return to_intel_dbuf_state(dbuf_state); |
| } |
| |
| int intel_dbuf_init(struct drm_i915_private *i915) |
| { |
| struct intel_dbuf_state *dbuf_state; |
| |
| dbuf_state = kzalloc(sizeof(*dbuf_state), GFP_KERNEL); |
| if (!dbuf_state) |
| return -ENOMEM; |
| |
| intel_atomic_global_obj_init(i915, &i915->display.dbuf.obj, |
| &dbuf_state->base, &intel_dbuf_funcs); |
| |
| return 0; |
| } |
| |
| static bool xelpdp_is_only_pipe_per_dbuf_bank(enum pipe pipe, u8 active_pipes) |
| { |
| switch (pipe) { |
| case PIPE_A: |
| return !(active_pipes & BIT(PIPE_D)); |
| case PIPE_D: |
| return !(active_pipes & BIT(PIPE_A)); |
| case PIPE_B: |
| return !(active_pipes & BIT(PIPE_C)); |
| case PIPE_C: |
| return !(active_pipes & BIT(PIPE_B)); |
| default: /* to suppress compiler warning */ |
| MISSING_CASE(pipe); |
| break; |
| } |
| |
| return false; |
| } |
| |
| static void intel_mbus_dbox_update(struct intel_atomic_state *state) |
| { |
| struct drm_i915_private *i915 = to_i915(state->base.dev); |
| const struct intel_dbuf_state *new_dbuf_state, *old_dbuf_state; |
| const struct intel_crtc *crtc; |
| u32 val = 0; |
| |
| if (DISPLAY_VER(i915) < 11) |
| return; |
| |
| new_dbuf_state = intel_atomic_get_new_dbuf_state(state); |
| old_dbuf_state = intel_atomic_get_old_dbuf_state(state); |
| if (!new_dbuf_state || |
| (new_dbuf_state->joined_mbus == old_dbuf_state->joined_mbus && |
| new_dbuf_state->active_pipes == old_dbuf_state->active_pipes)) |
| return; |
| |
| if (DISPLAY_VER(i915) >= 14) |
| val |= MBUS_DBOX_I_CREDIT(2); |
| |
| if (DISPLAY_VER(i915) >= 12) { |
| val |= MBUS_DBOX_B2B_TRANSACTIONS_MAX(16); |
| val |= MBUS_DBOX_B2B_TRANSACTIONS_DELAY(1); |
| val |= MBUS_DBOX_REGULATE_B2B_TRANSACTIONS_EN; |
| } |
| |
| if (DISPLAY_VER(i915) >= 14) |
| val |= new_dbuf_state->joined_mbus ? MBUS_DBOX_A_CREDIT(12) : |
| MBUS_DBOX_A_CREDIT(8); |
| else if (IS_ALDERLAKE_P(i915)) |
| /* Wa_22010947358:adl-p */ |
| val |= new_dbuf_state->joined_mbus ? MBUS_DBOX_A_CREDIT(6) : |
| MBUS_DBOX_A_CREDIT(4); |
| else |
| val |= MBUS_DBOX_A_CREDIT(2); |
| |
| if (DISPLAY_VER(i915) >= 14) { |
| val |= MBUS_DBOX_B_CREDIT(0xA); |
| } else if (IS_ALDERLAKE_P(i915)) { |
| val |= MBUS_DBOX_BW_CREDIT(2); |
| val |= MBUS_DBOX_B_CREDIT(8); |
| } else if (DISPLAY_VER(i915) >= 12) { |
| val |= MBUS_DBOX_BW_CREDIT(2); |
| val |= MBUS_DBOX_B_CREDIT(12); |
| } else { |
| val |= MBUS_DBOX_BW_CREDIT(1); |
| val |= MBUS_DBOX_B_CREDIT(8); |
| } |
| |
| for_each_intel_crtc_in_pipe_mask(&i915->drm, crtc, new_dbuf_state->active_pipes) { |
| u32 pipe_val = val; |
| |
| if (DISPLAY_VER_FULL(i915) == IP_VER(14, 0)) { |
| if (xelpdp_is_only_pipe_per_dbuf_bank(crtc->pipe, |
| new_dbuf_state->active_pipes)) |
| pipe_val |= MBUS_DBOX_BW_8CREDITS_MTL; |
| else |
| pipe_val |= MBUS_DBOX_BW_4CREDITS_MTL; |
| } |
| |
| intel_de_write(i915, PIPE_MBUS_DBOX_CTL(crtc->pipe), pipe_val); |
| } |
| } |
| |
| int intel_dbuf_state_set_mdclk_cdclk_ratio(struct intel_atomic_state *state, |
| int ratio) |
| { |
| struct intel_dbuf_state *dbuf_state; |
| |
| dbuf_state = intel_atomic_get_dbuf_state(state); |
| if (IS_ERR(dbuf_state)) |
| return PTR_ERR(dbuf_state); |
| |
| dbuf_state->mdclk_cdclk_ratio = ratio; |
| |
| return intel_atomic_lock_global_state(&dbuf_state->base); |
| } |
| |
| void intel_dbuf_mdclk_cdclk_ratio_update(struct drm_i915_private *i915, |
| int ratio, bool joined_mbus) |
| { |
| enum dbuf_slice slice; |
| |
| if (!HAS_MBUS_JOINING(i915)) |
| return; |
| |
| if (DISPLAY_VER(i915) >= 20) |
| intel_de_rmw(i915, MBUS_CTL, MBUS_TRANSLATION_THROTTLE_MIN_MASK, |
| MBUS_TRANSLATION_THROTTLE_MIN(ratio - 1)); |
| |
| if (joined_mbus) |
| ratio *= 2; |
| |
| drm_dbg_kms(&i915->drm, "Updating dbuf ratio to %d (mbus joined: %s)\n", |
| ratio, str_yes_no(joined_mbus)); |
| |
| for_each_dbuf_slice(i915, slice) |
| intel_de_rmw(i915, DBUF_CTL_S(slice), |
| DBUF_MIN_TRACKER_STATE_SERVICE_MASK, |
| DBUF_MIN_TRACKER_STATE_SERVICE(ratio - 1)); |
| } |
| |
| static void intel_dbuf_mdclk_min_tracker_update(struct intel_atomic_state *state) |
| { |
| struct drm_i915_private *i915 = to_i915(state->base.dev); |
| const struct intel_dbuf_state *old_dbuf_state = |
| intel_atomic_get_old_dbuf_state(state); |
| const struct intel_dbuf_state *new_dbuf_state = |
| intel_atomic_get_new_dbuf_state(state); |
| int mdclk_cdclk_ratio; |
| |
| if (intel_cdclk_is_decreasing_later(state)) { |
| /* cdclk/mdclk will be changed later by intel_set_cdclk_post_plane_update() */ |
| mdclk_cdclk_ratio = old_dbuf_state->mdclk_cdclk_ratio; |
| } else { |
| /* cdclk/mdclk already changed by intel_set_cdclk_pre_plane_update() */ |
| mdclk_cdclk_ratio = new_dbuf_state->mdclk_cdclk_ratio; |
| } |
| |
| intel_dbuf_mdclk_cdclk_ratio_update(i915, mdclk_cdclk_ratio, |
| new_dbuf_state->joined_mbus); |
| } |
| |
| static enum pipe intel_mbus_joined_pipe(struct intel_atomic_state *state, |
| const struct intel_dbuf_state *dbuf_state) |
| { |
| struct drm_i915_private *i915 = to_i915(state->base.dev); |
| enum pipe pipe = ffs(dbuf_state->active_pipes) - 1; |
| const struct intel_crtc_state *new_crtc_state; |
| struct intel_crtc *crtc; |
| |
| drm_WARN_ON(&i915->drm, !dbuf_state->joined_mbus); |
| drm_WARN_ON(&i915->drm, !is_power_of_2(dbuf_state->active_pipes)); |
| |
| crtc = intel_crtc_for_pipe(i915, pipe); |
| new_crtc_state = intel_atomic_get_new_crtc_state(state, crtc); |
| |
| if (new_crtc_state && !intel_crtc_needs_modeset(new_crtc_state)) |
| return pipe; |
| else |
| return INVALID_PIPE; |
| } |
| |
| static void intel_dbuf_mbus_join_update(struct intel_atomic_state *state, |
| enum pipe pipe) |
| { |
| struct drm_i915_private *i915 = to_i915(state->base.dev); |
| const struct intel_dbuf_state *old_dbuf_state = |
| intel_atomic_get_old_dbuf_state(state); |
| const struct intel_dbuf_state *new_dbuf_state = |
| intel_atomic_get_new_dbuf_state(state); |
| u32 mbus_ctl; |
| |
| drm_dbg_kms(&i915->drm, "Changing mbus joined: %s -> %s (pipe: %c)\n", |
| str_yes_no(old_dbuf_state->joined_mbus), |
| str_yes_no(new_dbuf_state->joined_mbus), |
| pipe != INVALID_PIPE ? pipe_name(pipe) : '*'); |
| |
| if (new_dbuf_state->joined_mbus) |
| mbus_ctl = MBUS_HASHING_MODE_1x4 | MBUS_JOIN; |
| else |
| mbus_ctl = MBUS_HASHING_MODE_2x2; |
| |
| if (pipe != INVALID_PIPE) |
| mbus_ctl |= MBUS_JOIN_PIPE_SELECT(pipe); |
| else |
| mbus_ctl |= MBUS_JOIN_PIPE_SELECT_NONE; |
| |
| intel_de_rmw(i915, MBUS_CTL, |
| MBUS_HASHING_MODE_MASK | MBUS_JOIN | |
| MBUS_JOIN_PIPE_SELECT_MASK, mbus_ctl); |
| } |
| |
| void intel_dbuf_mbus_pre_ddb_update(struct intel_atomic_state *state) |
| { |
| const struct intel_dbuf_state *new_dbuf_state = |
| intel_atomic_get_new_dbuf_state(state); |
| const struct intel_dbuf_state *old_dbuf_state = |
| intel_atomic_get_old_dbuf_state(state); |
| |
| if (!new_dbuf_state) |
| return; |
| |
| if (!old_dbuf_state->joined_mbus && new_dbuf_state->joined_mbus) { |
| enum pipe pipe = intel_mbus_joined_pipe(state, new_dbuf_state); |
| |
| WARN_ON(!new_dbuf_state->base.changed); |
| |
| intel_dbuf_mbus_join_update(state, pipe); |
| intel_mbus_dbox_update(state); |
| intel_dbuf_mdclk_min_tracker_update(state); |
| } |
| } |
| |
| void intel_dbuf_mbus_post_ddb_update(struct intel_atomic_state *state) |
| { |
| struct drm_i915_private *i915 = to_i915(state->base.dev); |
| const struct intel_dbuf_state *new_dbuf_state = |
| intel_atomic_get_new_dbuf_state(state); |
| const struct intel_dbuf_state *old_dbuf_state = |
| intel_atomic_get_old_dbuf_state(state); |
| |
| if (!new_dbuf_state) |
| return; |
| |
| if (old_dbuf_state->joined_mbus && !new_dbuf_state->joined_mbus) { |
| enum pipe pipe = intel_mbus_joined_pipe(state, old_dbuf_state); |
| |
| WARN_ON(!new_dbuf_state->base.changed); |
| |
| intel_dbuf_mdclk_min_tracker_update(state); |
| intel_mbus_dbox_update(state); |
| intel_dbuf_mbus_join_update(state, pipe); |
| |
| if (pipe != INVALID_PIPE) { |
| struct intel_crtc *crtc = intel_crtc_for_pipe(i915, pipe); |
| |
| intel_crtc_wait_for_next_vblank(crtc); |
| } |
| } else if (old_dbuf_state->joined_mbus == new_dbuf_state->joined_mbus && |
| old_dbuf_state->active_pipes != new_dbuf_state->active_pipes) { |
| WARN_ON(!new_dbuf_state->base.changed); |
| |
| intel_dbuf_mdclk_min_tracker_update(state); |
| intel_mbus_dbox_update(state); |
| } |
| |
| } |
| |
| void intel_dbuf_pre_plane_update(struct intel_atomic_state *state) |
| { |
| struct drm_i915_private *i915 = to_i915(state->base.dev); |
| const struct intel_dbuf_state *new_dbuf_state = |
| intel_atomic_get_new_dbuf_state(state); |
| const struct intel_dbuf_state *old_dbuf_state = |
| intel_atomic_get_old_dbuf_state(state); |
| u8 old_slices, new_slices; |
| |
| if (!new_dbuf_state) |
| return; |
| |
| old_slices = old_dbuf_state->enabled_slices; |
| new_slices = old_dbuf_state->enabled_slices | new_dbuf_state->enabled_slices; |
| |
| if (old_slices == new_slices) |
| return; |
| |
| WARN_ON(!new_dbuf_state->base.changed); |
| |
| gen9_dbuf_slices_update(i915, new_slices); |
| } |
| |
| void intel_dbuf_post_plane_update(struct intel_atomic_state *state) |
| { |
| struct drm_i915_private *i915 = to_i915(state->base.dev); |
| const struct intel_dbuf_state *new_dbuf_state = |
| intel_atomic_get_new_dbuf_state(state); |
| const struct intel_dbuf_state *old_dbuf_state = |
| intel_atomic_get_old_dbuf_state(state); |
| u8 old_slices, new_slices; |
| |
| if (!new_dbuf_state) |
| return; |
| |
| old_slices = old_dbuf_state->enabled_slices | new_dbuf_state->enabled_slices; |
| new_slices = new_dbuf_state->enabled_slices; |
| |
| if (old_slices == new_slices) |
| return; |
| |
| WARN_ON(!new_dbuf_state->base.changed); |
| |
| gen9_dbuf_slices_update(i915, new_slices); |
| } |
| |
| static int skl_watermark_ipc_status_show(struct seq_file *m, void *data) |
| { |
| struct drm_i915_private *i915 = m->private; |
| |
| seq_printf(m, "Isochronous Priority Control: %s\n", |
| str_yes_no(skl_watermark_ipc_enabled(i915))); |
| return 0; |
| } |
| |
| static int skl_watermark_ipc_status_open(struct inode *inode, struct file *file) |
| { |
| struct drm_i915_private *i915 = inode->i_private; |
| |
| return single_open(file, skl_watermark_ipc_status_show, i915); |
| } |
| |
| static ssize_t skl_watermark_ipc_status_write(struct file *file, |
| const char __user *ubuf, |
| size_t len, loff_t *offp) |
| { |
| struct seq_file *m = file->private_data; |
| struct drm_i915_private *i915 = m->private; |
| intel_wakeref_t wakeref; |
| bool enable; |
| int ret; |
| |
| ret = kstrtobool_from_user(ubuf, len, &enable); |
| if (ret < 0) |
| return ret; |
| |
| with_intel_runtime_pm(&i915->runtime_pm, wakeref) { |
| if (!skl_watermark_ipc_enabled(i915) && enable) |
| drm_info(&i915->drm, |
| "Enabling IPC: WM will be proper only after next commit\n"); |
| i915->display.wm.ipc_enabled = enable; |
| skl_watermark_ipc_update(i915); |
| } |
| |
| return len; |
| } |
| |
| static const struct file_operations skl_watermark_ipc_status_fops = { |
| .owner = THIS_MODULE, |
| .open = skl_watermark_ipc_status_open, |
| .read = seq_read, |
| .llseek = seq_lseek, |
| .release = single_release, |
| .write = skl_watermark_ipc_status_write |
| }; |
| |
| static int intel_sagv_status_show(struct seq_file *m, void *unused) |
| { |
| struct drm_i915_private *i915 = m->private; |
| static const char * const sagv_status[] = { |
| [I915_SAGV_UNKNOWN] = "unknown", |
| [I915_SAGV_DISABLED] = "disabled", |
| [I915_SAGV_ENABLED] = "enabled", |
| [I915_SAGV_NOT_CONTROLLED] = "not controlled", |
| }; |
| |
| seq_printf(m, "SAGV available: %s\n", str_yes_no(intel_has_sagv(i915))); |
| seq_printf(m, "SAGV modparam: %s\n", |
| str_enabled_disabled(i915->display.params.enable_sagv)); |
| seq_printf(m, "SAGV status: %s\n", sagv_status[i915->display.sagv.status]); |
| seq_printf(m, "SAGV block time: %d usec\n", i915->display.sagv.block_time_us); |
| |
| return 0; |
| } |
| |
| DEFINE_SHOW_ATTRIBUTE(intel_sagv_status); |
| |
| void skl_watermark_debugfs_register(struct drm_i915_private *i915) |
| { |
| struct drm_minor *minor = i915->drm.primary; |
| |
| if (HAS_IPC(i915)) |
| debugfs_create_file("i915_ipc_status", 0644, minor->debugfs_root, i915, |
| &skl_watermark_ipc_status_fops); |
| |
| if (HAS_SAGV(i915)) |
| debugfs_create_file("i915_sagv_status", 0444, minor->debugfs_root, i915, |
| &intel_sagv_status_fops); |
| } |
| |
| unsigned int skl_watermark_max_latency(struct drm_i915_private *i915, int initial_wm_level) |
| { |
| int level; |
| |
| for (level = i915->display.wm.num_levels - 1; level >= initial_wm_level; level--) { |
| unsigned int latency = skl_wm_latency(i915, level, NULL); |
| |
| if (latency) |
| return latency; |
| } |
| |
| return 0; |
| } |