| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Driver for the Diolan DLN-2 USB-ADC adapter |
| * |
| * Copyright (c) 2017 Jack Andersen |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/types.h> |
| #include <linux/platform_device.h> |
| #include <linux/mfd/dln2.h> |
| |
| #include <linux/iio/iio.h> |
| #include <linux/iio/sysfs.h> |
| #include <linux/iio/trigger.h> |
| #include <linux/iio/trigger_consumer.h> |
| #include <linux/iio/triggered_buffer.h> |
| #include <linux/iio/buffer.h> |
| #include <linux/iio/kfifo_buf.h> |
| |
| #define DLN2_ADC_MOD_NAME "dln2-adc" |
| |
| #define DLN2_ADC_ID 0x06 |
| |
| #define DLN2_ADC_GET_CHANNEL_COUNT DLN2_CMD(0x01, DLN2_ADC_ID) |
| #define DLN2_ADC_ENABLE DLN2_CMD(0x02, DLN2_ADC_ID) |
| #define DLN2_ADC_DISABLE DLN2_CMD(0x03, DLN2_ADC_ID) |
| #define DLN2_ADC_CHANNEL_ENABLE DLN2_CMD(0x05, DLN2_ADC_ID) |
| #define DLN2_ADC_CHANNEL_DISABLE DLN2_CMD(0x06, DLN2_ADC_ID) |
| #define DLN2_ADC_SET_RESOLUTION DLN2_CMD(0x08, DLN2_ADC_ID) |
| #define DLN2_ADC_CHANNEL_GET_VAL DLN2_CMD(0x0A, DLN2_ADC_ID) |
| #define DLN2_ADC_CHANNEL_GET_ALL_VAL DLN2_CMD(0x0B, DLN2_ADC_ID) |
| #define DLN2_ADC_CHANNEL_SET_CFG DLN2_CMD(0x0C, DLN2_ADC_ID) |
| #define DLN2_ADC_CHANNEL_GET_CFG DLN2_CMD(0x0D, DLN2_ADC_ID) |
| #define DLN2_ADC_CONDITION_MET_EV DLN2_CMD(0x10, DLN2_ADC_ID) |
| |
| #define DLN2_ADC_EVENT_NONE 0 |
| #define DLN2_ADC_EVENT_BELOW 1 |
| #define DLN2_ADC_EVENT_LEVEL_ABOVE 2 |
| #define DLN2_ADC_EVENT_OUTSIDE 3 |
| #define DLN2_ADC_EVENT_INSIDE 4 |
| #define DLN2_ADC_EVENT_ALWAYS 5 |
| |
| #define DLN2_ADC_MAX_CHANNELS 8 |
| #define DLN2_ADC_DATA_BITS 10 |
| |
| /* |
| * Plays similar role to iio_demux_table in subsystem core; except allocated |
| * in a fixed 8-element array. |
| */ |
| struct dln2_adc_demux_table { |
| unsigned int from; |
| unsigned int to; |
| unsigned int length; |
| }; |
| |
| struct dln2_adc { |
| struct platform_device *pdev; |
| struct iio_chan_spec iio_channels[DLN2_ADC_MAX_CHANNELS + 1]; |
| int port, trigger_chan; |
| struct iio_trigger *trig; |
| struct mutex mutex; |
| /* Cached sample period in milliseconds */ |
| unsigned int sample_period; |
| /* Demux table */ |
| unsigned int demux_count; |
| struct dln2_adc_demux_table demux[DLN2_ADC_MAX_CHANNELS]; |
| /* Precomputed timestamp padding offset and length */ |
| unsigned int ts_pad_offset, ts_pad_length; |
| }; |
| |
| struct dln2_adc_port_chan { |
| u8 port; |
| u8 chan; |
| }; |
| |
| struct dln2_adc_get_all_vals { |
| __le16 channel_mask; |
| __le16 values[DLN2_ADC_MAX_CHANNELS]; |
| }; |
| |
| static void dln2_adc_add_demux(struct dln2_adc *dln2, |
| unsigned int in_loc, unsigned int out_loc, |
| unsigned int length) |
| { |
| struct dln2_adc_demux_table *p = dln2->demux_count ? |
| &dln2->demux[dln2->demux_count - 1] : NULL; |
| |
| if (p && p->from + p->length == in_loc && |
| p->to + p->length == out_loc) { |
| p->length += length; |
| } else if (dln2->demux_count < DLN2_ADC_MAX_CHANNELS) { |
| p = &dln2->demux[dln2->demux_count++]; |
| p->from = in_loc; |
| p->to = out_loc; |
| p->length = length; |
| } |
| } |
| |
| static void dln2_adc_update_demux(struct dln2_adc *dln2) |
| { |
| int in_ind = -1, out_ind; |
| unsigned int in_loc = 0, out_loc = 0; |
| struct iio_dev *indio_dev = platform_get_drvdata(dln2->pdev); |
| |
| /* Clear out any old demux */ |
| dln2->demux_count = 0; |
| |
| /* Optimize all 8-channels case */ |
| if (iio_get_masklength(indio_dev) && |
| (*indio_dev->active_scan_mask & 0xff) == 0xff) { |
| dln2_adc_add_demux(dln2, 0, 0, 16); |
| dln2->ts_pad_offset = 0; |
| dln2->ts_pad_length = 0; |
| return; |
| } |
| |
| /* Build demux table from fixed 8-channels to active_scan_mask */ |
| iio_for_each_active_channel(indio_dev, out_ind) { |
| /* Handle timestamp separately */ |
| if (out_ind == DLN2_ADC_MAX_CHANNELS) |
| break; |
| for (++in_ind; in_ind != out_ind; ++in_ind) |
| in_loc += 2; |
| dln2_adc_add_demux(dln2, in_loc, out_loc, 2); |
| out_loc += 2; |
| in_loc += 2; |
| } |
| |
| if (indio_dev->scan_timestamp) { |
| size_t ts_offset = indio_dev->scan_bytes / sizeof(int64_t) - 1; |
| |
| dln2->ts_pad_offset = out_loc; |
| dln2->ts_pad_length = ts_offset * sizeof(int64_t) - out_loc; |
| } else { |
| dln2->ts_pad_offset = 0; |
| dln2->ts_pad_length = 0; |
| } |
| } |
| |
| static int dln2_adc_get_chan_count(struct dln2_adc *dln2) |
| { |
| int ret; |
| u8 port = dln2->port; |
| u8 count; |
| int olen = sizeof(count); |
| |
| ret = dln2_transfer(dln2->pdev, DLN2_ADC_GET_CHANNEL_COUNT, |
| &port, sizeof(port), &count, &olen); |
| if (ret < 0) { |
| dev_dbg(&dln2->pdev->dev, "Problem in %s\n", __func__); |
| return ret; |
| } |
| if (olen < sizeof(count)) |
| return -EPROTO; |
| |
| return count; |
| } |
| |
| static int dln2_adc_set_port_resolution(struct dln2_adc *dln2) |
| { |
| int ret; |
| struct dln2_adc_port_chan port_chan = { |
| .port = dln2->port, |
| .chan = DLN2_ADC_DATA_BITS, |
| }; |
| |
| ret = dln2_transfer_tx(dln2->pdev, DLN2_ADC_SET_RESOLUTION, |
| &port_chan, sizeof(port_chan)); |
| if (ret < 0) |
| dev_dbg(&dln2->pdev->dev, "Problem in %s\n", __func__); |
| |
| return ret; |
| } |
| |
| static int dln2_adc_set_chan_enabled(struct dln2_adc *dln2, |
| int channel, bool enable) |
| { |
| int ret; |
| struct dln2_adc_port_chan port_chan = { |
| .port = dln2->port, |
| .chan = channel, |
| }; |
| u16 cmd = enable ? DLN2_ADC_CHANNEL_ENABLE : DLN2_ADC_CHANNEL_DISABLE; |
| |
| ret = dln2_transfer_tx(dln2->pdev, cmd, &port_chan, sizeof(port_chan)); |
| if (ret < 0) |
| dev_dbg(&dln2->pdev->dev, "Problem in %s\n", __func__); |
| |
| return ret; |
| } |
| |
| static int dln2_adc_set_port_enabled(struct dln2_adc *dln2, bool enable, |
| u16 *conflict_out) |
| { |
| int ret; |
| u8 port = dln2->port; |
| __le16 conflict; |
| int olen = sizeof(conflict); |
| u16 cmd = enable ? DLN2_ADC_ENABLE : DLN2_ADC_DISABLE; |
| |
| if (conflict_out) |
| *conflict_out = 0; |
| |
| ret = dln2_transfer(dln2->pdev, cmd, &port, sizeof(port), |
| &conflict, &olen); |
| if (ret < 0) { |
| dev_dbg(&dln2->pdev->dev, "Problem in %s(%d)\n", |
| __func__, (int)enable); |
| if (conflict_out && enable && olen >= sizeof(conflict)) |
| *conflict_out = le16_to_cpu(conflict); |
| return ret; |
| } |
| if (enable && olen < sizeof(conflict)) |
| return -EPROTO; |
| |
| return ret; |
| } |
| |
| static int dln2_adc_set_chan_period(struct dln2_adc *dln2, |
| unsigned int channel, unsigned int period) |
| { |
| int ret; |
| struct { |
| struct dln2_adc_port_chan port_chan; |
| __u8 type; |
| __le16 period; |
| __le16 low; |
| __le16 high; |
| } __packed set_cfg = { |
| .port_chan.port = dln2->port, |
| .port_chan.chan = channel, |
| .type = period ? DLN2_ADC_EVENT_ALWAYS : DLN2_ADC_EVENT_NONE, |
| .period = cpu_to_le16(period) |
| }; |
| |
| ret = dln2_transfer_tx(dln2->pdev, DLN2_ADC_CHANNEL_SET_CFG, |
| &set_cfg, sizeof(set_cfg)); |
| if (ret < 0) |
| dev_dbg(&dln2->pdev->dev, "Problem in %s\n", __func__); |
| |
| return ret; |
| } |
| |
| static int dln2_adc_read(struct dln2_adc *dln2, unsigned int channel) |
| { |
| int ret, i; |
| u16 conflict; |
| __le16 value; |
| int olen = sizeof(value); |
| struct dln2_adc_port_chan port_chan = { |
| .port = dln2->port, |
| .chan = channel, |
| }; |
| |
| ret = dln2_adc_set_chan_enabled(dln2, channel, true); |
| if (ret < 0) |
| return ret; |
| |
| ret = dln2_adc_set_port_enabled(dln2, true, &conflict); |
| if (ret < 0) { |
| if (conflict) { |
| dev_err(&dln2->pdev->dev, |
| "ADC pins conflict with mask %04X\n", |
| (int)conflict); |
| ret = -EBUSY; |
| } |
| goto disable_chan; |
| } |
| |
| /* |
| * Call GET_VAL twice due to initial zero-return immediately after |
| * enabling channel. |
| */ |
| for (i = 0; i < 2; ++i) { |
| ret = dln2_transfer(dln2->pdev, DLN2_ADC_CHANNEL_GET_VAL, |
| &port_chan, sizeof(port_chan), |
| &value, &olen); |
| if (ret < 0) { |
| dev_dbg(&dln2->pdev->dev, "Problem in %s\n", __func__); |
| goto disable_port; |
| } |
| if (olen < sizeof(value)) { |
| ret = -EPROTO; |
| goto disable_port; |
| } |
| } |
| |
| ret = le16_to_cpu(value); |
| |
| disable_port: |
| dln2_adc_set_port_enabled(dln2, false, NULL); |
| disable_chan: |
| dln2_adc_set_chan_enabled(dln2, channel, false); |
| |
| return ret; |
| } |
| |
| static int dln2_adc_read_all(struct dln2_adc *dln2, |
| struct dln2_adc_get_all_vals *get_all_vals) |
| { |
| int ret; |
| __u8 port = dln2->port; |
| int olen = sizeof(*get_all_vals); |
| |
| ret = dln2_transfer(dln2->pdev, DLN2_ADC_CHANNEL_GET_ALL_VAL, |
| &port, sizeof(port), get_all_vals, &olen); |
| if (ret < 0) { |
| dev_dbg(&dln2->pdev->dev, "Problem in %s\n", __func__); |
| return ret; |
| } |
| if (olen < sizeof(*get_all_vals)) |
| return -EPROTO; |
| |
| return ret; |
| } |
| |
| static int dln2_adc_read_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, |
| int *val, |
| int *val2, |
| long mask) |
| { |
| int ret; |
| unsigned int microhertz; |
| struct dln2_adc *dln2 = iio_priv(indio_dev); |
| |
| switch (mask) { |
| case IIO_CHAN_INFO_RAW: |
| ret = iio_device_claim_direct_mode(indio_dev); |
| if (ret < 0) |
| return ret; |
| |
| mutex_lock(&dln2->mutex); |
| ret = dln2_adc_read(dln2, chan->channel); |
| mutex_unlock(&dln2->mutex); |
| |
| iio_device_release_direct_mode(indio_dev); |
| |
| if (ret < 0) |
| return ret; |
| |
| *val = ret; |
| return IIO_VAL_INT; |
| |
| case IIO_CHAN_INFO_SCALE: |
| /* |
| * Voltage reference is fixed at 3.3v |
| * 3.3 / (1 << 10) * 1000000000 |
| */ |
| *val = 0; |
| *val2 = 3222656; |
| return IIO_VAL_INT_PLUS_NANO; |
| |
| case IIO_CHAN_INFO_SAMP_FREQ: |
| if (dln2->sample_period) { |
| microhertz = 1000000000 / dln2->sample_period; |
| *val = microhertz / 1000000; |
| *val2 = microhertz % 1000000; |
| } else { |
| *val = 0; |
| *val2 = 0; |
| } |
| |
| return IIO_VAL_INT_PLUS_MICRO; |
| |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int dln2_adc_write_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, |
| int val, |
| int val2, |
| long mask) |
| { |
| int ret; |
| unsigned int microhertz; |
| struct dln2_adc *dln2 = iio_priv(indio_dev); |
| |
| switch (mask) { |
| case IIO_CHAN_INFO_SAMP_FREQ: |
| microhertz = 1000000 * val + val2; |
| |
| mutex_lock(&dln2->mutex); |
| |
| dln2->sample_period = |
| microhertz ? 1000000000 / microhertz : UINT_MAX; |
| if (dln2->sample_period > 65535) { |
| dln2->sample_period = 65535; |
| dev_warn(&dln2->pdev->dev, |
| "clamping period to 65535ms\n"); |
| } |
| |
| /* |
| * The first requested channel is arbitrated as a shared |
| * trigger source, so only one event is registered with the |
| * DLN. The event handler will then read all enabled channel |
| * values using DLN2_ADC_CHANNEL_GET_ALL_VAL to maintain |
| * synchronization between ADC readings. |
| */ |
| if (dln2->trigger_chan != -1) |
| ret = dln2_adc_set_chan_period(dln2, |
| dln2->trigger_chan, dln2->sample_period); |
| else |
| ret = 0; |
| |
| mutex_unlock(&dln2->mutex); |
| |
| return ret; |
| |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int dln2_update_scan_mode(struct iio_dev *indio_dev, |
| const unsigned long *scan_mask) |
| { |
| struct dln2_adc *dln2 = iio_priv(indio_dev); |
| int chan_count = indio_dev->num_channels - 1; |
| int ret, i, j; |
| |
| mutex_lock(&dln2->mutex); |
| |
| for (i = 0; i < chan_count; ++i) { |
| ret = dln2_adc_set_chan_enabled(dln2, i, |
| test_bit(i, scan_mask)); |
| if (ret < 0) { |
| for (j = 0; j < i; ++j) |
| dln2_adc_set_chan_enabled(dln2, j, false); |
| mutex_unlock(&dln2->mutex); |
| dev_err(&dln2->pdev->dev, |
| "Unable to enable ADC channel %d\n", i); |
| return -EBUSY; |
| } |
| } |
| |
| dln2_adc_update_demux(dln2); |
| |
| mutex_unlock(&dln2->mutex); |
| |
| return 0; |
| } |
| |
| #define DLN2_ADC_CHAN(lval, idx) { \ |
| lval.type = IIO_VOLTAGE; \ |
| lval.channel = idx; \ |
| lval.indexed = 1; \ |
| lval.info_mask_separate = BIT(IIO_CHAN_INFO_RAW); \ |
| lval.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SCALE) | \ |
| BIT(IIO_CHAN_INFO_SAMP_FREQ); \ |
| lval.scan_index = idx; \ |
| lval.scan_type.sign = 'u'; \ |
| lval.scan_type.realbits = DLN2_ADC_DATA_BITS; \ |
| lval.scan_type.storagebits = 16; \ |
| lval.scan_type.endianness = IIO_LE; \ |
| } |
| |
| /* Assignment version of IIO_CHAN_SOFT_TIMESTAMP */ |
| #define IIO_CHAN_SOFT_TIMESTAMP_ASSIGN(lval, _si) { \ |
| lval.type = IIO_TIMESTAMP; \ |
| lval.channel = -1; \ |
| lval.scan_index = _si; \ |
| lval.scan_type.sign = 's'; \ |
| lval.scan_type.realbits = 64; \ |
| lval.scan_type.storagebits = 64; \ |
| } |
| |
| static const struct iio_info dln2_adc_info = { |
| .read_raw = dln2_adc_read_raw, |
| .write_raw = dln2_adc_write_raw, |
| .update_scan_mode = dln2_update_scan_mode, |
| }; |
| |
| static irqreturn_t dln2_adc_trigger_h(int irq, void *p) |
| { |
| struct iio_poll_func *pf = p; |
| struct iio_dev *indio_dev = pf->indio_dev; |
| struct { |
| __le16 values[DLN2_ADC_MAX_CHANNELS]; |
| int64_t timestamp_space; |
| } data; |
| struct dln2_adc_get_all_vals dev_data; |
| struct dln2_adc *dln2 = iio_priv(indio_dev); |
| const struct dln2_adc_demux_table *t; |
| int ret, i; |
| |
| mutex_lock(&dln2->mutex); |
| ret = dln2_adc_read_all(dln2, &dev_data); |
| mutex_unlock(&dln2->mutex); |
| if (ret < 0) |
| goto done; |
| |
| /* Demux operation */ |
| for (i = 0; i < dln2->demux_count; ++i) { |
| t = &dln2->demux[i]; |
| memcpy((void *)data.values + t->to, |
| (void *)dev_data.values + t->from, t->length); |
| } |
| |
| /* Zero padding space between values and timestamp */ |
| if (dln2->ts_pad_length) |
| memset((void *)data.values + dln2->ts_pad_offset, |
| 0, dln2->ts_pad_length); |
| |
| iio_push_to_buffers_with_timestamp(indio_dev, &data, |
| iio_get_time_ns(indio_dev)); |
| |
| done: |
| iio_trigger_notify_done(indio_dev->trig); |
| return IRQ_HANDLED; |
| } |
| |
| static int dln2_adc_triggered_buffer_postenable(struct iio_dev *indio_dev) |
| { |
| int ret; |
| struct dln2_adc *dln2 = iio_priv(indio_dev); |
| u16 conflict; |
| unsigned int trigger_chan; |
| |
| mutex_lock(&dln2->mutex); |
| |
| /* Enable ADC */ |
| ret = dln2_adc_set_port_enabled(dln2, true, &conflict); |
| if (ret < 0) { |
| mutex_unlock(&dln2->mutex); |
| dev_dbg(&dln2->pdev->dev, "Problem in %s\n", __func__); |
| if (conflict) { |
| dev_err(&dln2->pdev->dev, |
| "ADC pins conflict with mask %04X\n", |
| (int)conflict); |
| ret = -EBUSY; |
| } |
| return ret; |
| } |
| |
| /* Assign trigger channel based on first enabled channel */ |
| trigger_chan = find_first_bit(indio_dev->active_scan_mask, |
| iio_get_masklength(indio_dev)); |
| if (trigger_chan < DLN2_ADC_MAX_CHANNELS) { |
| dln2->trigger_chan = trigger_chan; |
| ret = dln2_adc_set_chan_period(dln2, dln2->trigger_chan, |
| dln2->sample_period); |
| mutex_unlock(&dln2->mutex); |
| if (ret < 0) { |
| dev_dbg(&dln2->pdev->dev, "Problem in %s\n", __func__); |
| return ret; |
| } |
| } else { |
| dln2->trigger_chan = -1; |
| mutex_unlock(&dln2->mutex); |
| } |
| |
| return 0; |
| } |
| |
| static int dln2_adc_triggered_buffer_predisable(struct iio_dev *indio_dev) |
| { |
| int ret; |
| struct dln2_adc *dln2 = iio_priv(indio_dev); |
| |
| mutex_lock(&dln2->mutex); |
| |
| /* Disable trigger channel */ |
| if (dln2->trigger_chan != -1) { |
| dln2_adc_set_chan_period(dln2, dln2->trigger_chan, 0); |
| dln2->trigger_chan = -1; |
| } |
| |
| /* Disable ADC */ |
| ret = dln2_adc_set_port_enabled(dln2, false, NULL); |
| |
| mutex_unlock(&dln2->mutex); |
| if (ret < 0) |
| dev_dbg(&dln2->pdev->dev, "Problem in %s\n", __func__); |
| |
| return ret; |
| } |
| |
| static const struct iio_buffer_setup_ops dln2_adc_buffer_setup_ops = { |
| .postenable = dln2_adc_triggered_buffer_postenable, |
| .predisable = dln2_adc_triggered_buffer_predisable, |
| }; |
| |
| static void dln2_adc_event(struct platform_device *pdev, u16 echo, |
| const void *data, int len) |
| { |
| struct iio_dev *indio_dev = platform_get_drvdata(pdev); |
| struct dln2_adc *dln2 = iio_priv(indio_dev); |
| |
| /* Called via URB completion handler */ |
| iio_trigger_poll(dln2->trig); |
| } |
| |
| static int dln2_adc_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct dln2_adc *dln2; |
| struct dln2_platform_data *pdata = dev_get_platdata(&pdev->dev); |
| struct iio_dev *indio_dev; |
| int i, ret, chans; |
| |
| indio_dev = devm_iio_device_alloc(dev, sizeof(*dln2)); |
| if (!indio_dev) { |
| dev_err(dev, "failed allocating iio device\n"); |
| return -ENOMEM; |
| } |
| |
| dln2 = iio_priv(indio_dev); |
| dln2->pdev = pdev; |
| dln2->port = pdata->port; |
| dln2->trigger_chan = -1; |
| mutex_init(&dln2->mutex); |
| |
| platform_set_drvdata(pdev, indio_dev); |
| |
| ret = dln2_adc_set_port_resolution(dln2); |
| if (ret < 0) { |
| dev_err(dev, "failed to set ADC resolution to 10 bits\n"); |
| return ret; |
| } |
| |
| chans = dln2_adc_get_chan_count(dln2); |
| if (chans < 0) { |
| dev_err(dev, "failed to get channel count: %d\n", chans); |
| return chans; |
| } |
| if (chans > DLN2_ADC_MAX_CHANNELS) { |
| chans = DLN2_ADC_MAX_CHANNELS; |
| dev_warn(dev, "clamping channels to %d\n", |
| DLN2_ADC_MAX_CHANNELS); |
| } |
| |
| for (i = 0; i < chans; ++i) |
| DLN2_ADC_CHAN(dln2->iio_channels[i], i) |
| IIO_CHAN_SOFT_TIMESTAMP_ASSIGN(dln2->iio_channels[i], i); |
| |
| indio_dev->name = DLN2_ADC_MOD_NAME; |
| indio_dev->info = &dln2_adc_info; |
| indio_dev->modes = INDIO_DIRECT_MODE; |
| indio_dev->channels = dln2->iio_channels; |
| indio_dev->num_channels = chans + 1; |
| indio_dev->setup_ops = &dln2_adc_buffer_setup_ops; |
| |
| dln2->trig = devm_iio_trigger_alloc(dev, "%s-dev%d", |
| indio_dev->name, |
| iio_device_id(indio_dev)); |
| if (!dln2->trig) { |
| dev_err(dev, "failed to allocate trigger\n"); |
| return -ENOMEM; |
| } |
| iio_trigger_set_drvdata(dln2->trig, dln2); |
| ret = devm_iio_trigger_register(dev, dln2->trig); |
| if (ret) { |
| dev_err(dev, "failed to register trigger: %d\n", ret); |
| return ret; |
| } |
| iio_trigger_set_immutable(indio_dev, dln2->trig); |
| |
| ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL, |
| dln2_adc_trigger_h, |
| &dln2_adc_buffer_setup_ops); |
| if (ret) { |
| dev_err(dev, "failed to allocate triggered buffer: %d\n", ret); |
| return ret; |
| } |
| |
| ret = dln2_register_event_cb(pdev, DLN2_ADC_CONDITION_MET_EV, |
| dln2_adc_event); |
| if (ret) { |
| dev_err(dev, "failed to setup DLN2 periodic event: %d\n", ret); |
| return ret; |
| } |
| |
| ret = iio_device_register(indio_dev); |
| if (ret) { |
| dev_err(dev, "failed to register iio device: %d\n", ret); |
| goto unregister_event; |
| } |
| |
| return ret; |
| |
| unregister_event: |
| dln2_unregister_event_cb(pdev, DLN2_ADC_CONDITION_MET_EV); |
| |
| return ret; |
| } |
| |
| static void dln2_adc_remove(struct platform_device *pdev) |
| { |
| struct iio_dev *indio_dev = platform_get_drvdata(pdev); |
| |
| iio_device_unregister(indio_dev); |
| dln2_unregister_event_cb(pdev, DLN2_ADC_CONDITION_MET_EV); |
| } |
| |
| static struct platform_driver dln2_adc_driver = { |
| .driver.name = DLN2_ADC_MOD_NAME, |
| .probe = dln2_adc_probe, |
| .remove_new = dln2_adc_remove, |
| }; |
| |
| module_platform_driver(dln2_adc_driver); |
| |
| MODULE_AUTHOR("Jack Andersen <jackoalan@gmail.com"); |
| MODULE_DESCRIPTION("Driver for the Diolan DLN2 ADC interface"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_ALIAS("platform:dln2-adc"); |