| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Hampshire serial touchscreen driver |
| * |
| * Copyright (c) 2010 Adam Bennett |
| * Based on the dynapro driver (c) Tias Guns |
| */ |
| |
| |
| /* |
| * 2010/04/08 Adam Bennett <abennett72@gmail.com> |
| * Copied dynapro.c and edited for Hampshire 4-byte protocol |
| */ |
| |
| #include <linux/errno.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/input.h> |
| #include <linux/serio.h> |
| |
| #define DRIVER_DESC "Hampshire serial touchscreen driver" |
| |
| MODULE_AUTHOR("Adam Bennett <abennett72@gmail.com>"); |
| MODULE_DESCRIPTION(DRIVER_DESC); |
| MODULE_LICENSE("GPL"); |
| |
| /* |
| * Definitions & global arrays. |
| */ |
| |
| #define HAMPSHIRE_FORMAT_TOUCH_BIT 0x40 |
| #define HAMPSHIRE_FORMAT_LENGTH 4 |
| #define HAMPSHIRE_RESPONSE_BEGIN_BYTE 0x80 |
| |
| #define HAMPSHIRE_MIN_XC 0 |
| #define HAMPSHIRE_MAX_XC 0x1000 |
| #define HAMPSHIRE_MIN_YC 0 |
| #define HAMPSHIRE_MAX_YC 0x1000 |
| |
| #define HAMPSHIRE_GET_XC(data) (((data[3] & 0x0c) >> 2) | (data[1] << 2) | ((data[0] & 0x38) << 6)) |
| #define HAMPSHIRE_GET_YC(data) ((data[3] & 0x03) | (data[2] << 2) | ((data[0] & 0x07) << 9)) |
| #define HAMPSHIRE_GET_TOUCHED(data) (HAMPSHIRE_FORMAT_TOUCH_BIT & data[0]) |
| |
| /* |
| * Per-touchscreen data. |
| */ |
| |
| struct hampshire { |
| struct input_dev *dev; |
| struct serio *serio; |
| int idx; |
| unsigned char data[HAMPSHIRE_FORMAT_LENGTH]; |
| char phys[32]; |
| }; |
| |
| static void hampshire_process_data(struct hampshire *phampshire) |
| { |
| struct input_dev *dev = phampshire->dev; |
| |
| if (HAMPSHIRE_FORMAT_LENGTH == ++phampshire->idx) { |
| input_report_abs(dev, ABS_X, HAMPSHIRE_GET_XC(phampshire->data)); |
| input_report_abs(dev, ABS_Y, HAMPSHIRE_GET_YC(phampshire->data)); |
| input_report_key(dev, BTN_TOUCH, |
| HAMPSHIRE_GET_TOUCHED(phampshire->data)); |
| input_sync(dev); |
| |
| phampshire->idx = 0; |
| } |
| } |
| |
| static irqreturn_t hampshire_interrupt(struct serio *serio, |
| unsigned char data, unsigned int flags) |
| { |
| struct hampshire *phampshire = serio_get_drvdata(serio); |
| |
| phampshire->data[phampshire->idx] = data; |
| |
| if (HAMPSHIRE_RESPONSE_BEGIN_BYTE & phampshire->data[0]) |
| hampshire_process_data(phampshire); |
| else |
| dev_dbg(&serio->dev, "unknown/unsynchronized data: %x\n", |
| phampshire->data[0]); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static void hampshire_disconnect(struct serio *serio) |
| { |
| struct hampshire *phampshire = serio_get_drvdata(serio); |
| |
| input_get_device(phampshire->dev); |
| input_unregister_device(phampshire->dev); |
| serio_close(serio); |
| serio_set_drvdata(serio, NULL); |
| input_put_device(phampshire->dev); |
| kfree(phampshire); |
| } |
| |
| /* |
| * hampshire_connect() is the routine that is called when someone adds a |
| * new serio device that supports hampshire protocol and registers it as |
| * an input device. This is usually accomplished using inputattach. |
| */ |
| |
| static int hampshire_connect(struct serio *serio, struct serio_driver *drv) |
| { |
| struct hampshire *phampshire; |
| struct input_dev *input_dev; |
| int err; |
| |
| phampshire = kzalloc(sizeof(*phampshire), GFP_KERNEL); |
| input_dev = input_allocate_device(); |
| if (!phampshire || !input_dev) { |
| err = -ENOMEM; |
| goto fail1; |
| } |
| |
| phampshire->serio = serio; |
| phampshire->dev = input_dev; |
| snprintf(phampshire->phys, sizeof(phampshire->phys), |
| "%s/input0", serio->phys); |
| |
| input_dev->name = "Hampshire Serial TouchScreen"; |
| input_dev->phys = phampshire->phys; |
| input_dev->id.bustype = BUS_RS232; |
| input_dev->id.vendor = SERIO_HAMPSHIRE; |
| input_dev->id.product = 0; |
| input_dev->id.version = 0x0001; |
| input_dev->dev.parent = &serio->dev; |
| input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); |
| input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); |
| input_set_abs_params(phampshire->dev, ABS_X, |
| HAMPSHIRE_MIN_XC, HAMPSHIRE_MAX_XC, 0, 0); |
| input_set_abs_params(phampshire->dev, ABS_Y, |
| HAMPSHIRE_MIN_YC, HAMPSHIRE_MAX_YC, 0, 0); |
| |
| serio_set_drvdata(serio, phampshire); |
| |
| err = serio_open(serio, drv); |
| if (err) |
| goto fail2; |
| |
| err = input_register_device(phampshire->dev); |
| if (err) |
| goto fail3; |
| |
| return 0; |
| |
| fail3: serio_close(serio); |
| fail2: serio_set_drvdata(serio, NULL); |
| fail1: input_free_device(input_dev); |
| kfree(phampshire); |
| return err; |
| } |
| |
| /* |
| * The serio driver structure. |
| */ |
| |
| static const struct serio_device_id hampshire_serio_ids[] = { |
| { |
| .type = SERIO_RS232, |
| .proto = SERIO_HAMPSHIRE, |
| .id = SERIO_ANY, |
| .extra = SERIO_ANY, |
| }, |
| { 0 } |
| }; |
| |
| MODULE_DEVICE_TABLE(serio, hampshire_serio_ids); |
| |
| static struct serio_driver hampshire_drv = { |
| .driver = { |
| .name = "hampshire", |
| }, |
| .description = DRIVER_DESC, |
| .id_table = hampshire_serio_ids, |
| .interrupt = hampshire_interrupt, |
| .connect = hampshire_connect, |
| .disconnect = hampshire_disconnect, |
| }; |
| |
| module_serio_driver(hampshire_drv); |