| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * MicroTouch (3M) serial touchscreen driver |
| * |
| * Copyright (c) 2004 Vojtech Pavlik |
| */ |
| |
| |
| /* |
| * 2005/02/19 Dan Streetman <ddstreet@ieee.org> |
| * Copied elo.c and edited for MicroTouch protocol |
| */ |
| |
| #include <linux/errno.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/input.h> |
| #include <linux/serio.h> |
| |
| #define DRIVER_DESC "MicroTouch serial touchscreen driver" |
| |
| MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>"); |
| MODULE_DESCRIPTION(DRIVER_DESC); |
| MODULE_LICENSE("GPL"); |
| |
| /* |
| * Definitions & global arrays. |
| */ |
| |
| #define MTOUCH_FORMAT_TABLET_STATUS_BIT 0x80 |
| #define MTOUCH_FORMAT_TABLET_TOUCH_BIT 0x40 |
| #define MTOUCH_FORMAT_TABLET_LENGTH 5 |
| #define MTOUCH_RESPONSE_BEGIN_BYTE 0x01 |
| #define MTOUCH_RESPONSE_END_BYTE 0x0d |
| |
| /* todo: check specs for max length of all responses */ |
| #define MTOUCH_MAX_LENGTH 16 |
| |
| #define MTOUCH_MIN_XC 0 |
| #define MTOUCH_MAX_XC 0x3fff |
| #define MTOUCH_MIN_YC 0 |
| #define MTOUCH_MAX_YC 0x3fff |
| |
| #define MTOUCH_GET_XC(data) (((data[2])<<7) | data[1]) |
| #define MTOUCH_GET_YC(data) (((data[4])<<7) | data[3]) |
| #define MTOUCH_GET_TOUCHED(data) (MTOUCH_FORMAT_TABLET_TOUCH_BIT & data[0]) |
| |
| /* |
| * Per-touchscreen data. |
| */ |
| |
| struct mtouch { |
| struct input_dev *dev; |
| struct serio *serio; |
| int idx; |
| unsigned char data[MTOUCH_MAX_LENGTH]; |
| char phys[32]; |
| }; |
| |
| static void mtouch_process_format_tablet(struct mtouch *mtouch) |
| { |
| struct input_dev *dev = mtouch->dev; |
| |
| if (MTOUCH_FORMAT_TABLET_LENGTH == ++mtouch->idx) { |
| input_report_abs(dev, ABS_X, MTOUCH_GET_XC(mtouch->data)); |
| input_report_abs(dev, ABS_Y, MTOUCH_MAX_YC - MTOUCH_GET_YC(mtouch->data)); |
| input_report_key(dev, BTN_TOUCH, MTOUCH_GET_TOUCHED(mtouch->data)); |
| input_sync(dev); |
| |
| mtouch->idx = 0; |
| } |
| } |
| |
| static void mtouch_process_response(struct mtouch *mtouch) |
| { |
| if (MTOUCH_RESPONSE_END_BYTE == mtouch->data[mtouch->idx++]) { |
| /* FIXME - process response */ |
| mtouch->idx = 0; |
| } else if (MTOUCH_MAX_LENGTH == mtouch->idx) { |
| printk(KERN_ERR "mtouch.c: too many response bytes\n"); |
| mtouch->idx = 0; |
| } |
| } |
| |
| static irqreturn_t mtouch_interrupt(struct serio *serio, |
| unsigned char data, unsigned int flags) |
| { |
| struct mtouch *mtouch = serio_get_drvdata(serio); |
| |
| mtouch->data[mtouch->idx] = data; |
| |
| if (MTOUCH_FORMAT_TABLET_STATUS_BIT & mtouch->data[0]) |
| mtouch_process_format_tablet(mtouch); |
| else if (MTOUCH_RESPONSE_BEGIN_BYTE == mtouch->data[0]) |
| mtouch_process_response(mtouch); |
| else |
| printk(KERN_DEBUG "mtouch.c: unknown/unsynchronized data from device, byte %x\n",mtouch->data[0]); |
| |
| return IRQ_HANDLED; |
| } |
| |
| /* |
| * mtouch_disconnect() is the opposite of mtouch_connect() |
| */ |
| |
| static void mtouch_disconnect(struct serio *serio) |
| { |
| struct mtouch *mtouch = serio_get_drvdata(serio); |
| |
| input_get_device(mtouch->dev); |
| input_unregister_device(mtouch->dev); |
| serio_close(serio); |
| serio_set_drvdata(serio, NULL); |
| input_put_device(mtouch->dev); |
| kfree(mtouch); |
| } |
| |
| /* |
| * mtouch_connect() is the routine that is called when someone adds a |
| * new serio device that supports MicroTouch (Format Tablet) protocol and registers it as |
| * an input device. |
| */ |
| |
| static int mtouch_connect(struct serio *serio, struct serio_driver *drv) |
| { |
| struct mtouch *mtouch; |
| struct input_dev *input_dev; |
| int err; |
| |
| mtouch = kzalloc(sizeof(*mtouch), GFP_KERNEL); |
| input_dev = input_allocate_device(); |
| if (!mtouch || !input_dev) { |
| err = -ENOMEM; |
| goto fail1; |
| } |
| |
| mtouch->serio = serio; |
| mtouch->dev = input_dev; |
| snprintf(mtouch->phys, sizeof(mtouch->phys), "%s/input0", serio->phys); |
| |
| input_dev->name = "MicroTouch Serial TouchScreen"; |
| input_dev->phys = mtouch->phys; |
| input_dev->id.bustype = BUS_RS232; |
| input_dev->id.vendor = SERIO_MICROTOUCH; |
| input_dev->id.product = 0; |
| input_dev->id.version = 0x0100; |
| input_dev->dev.parent = &serio->dev; |
| input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); |
| input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); |
| input_set_abs_params(mtouch->dev, ABS_X, MTOUCH_MIN_XC, MTOUCH_MAX_XC, 0, 0); |
| input_set_abs_params(mtouch->dev, ABS_Y, MTOUCH_MIN_YC, MTOUCH_MAX_YC, 0, 0); |
| |
| serio_set_drvdata(serio, mtouch); |
| |
| err = serio_open(serio, drv); |
| if (err) |
| goto fail2; |
| |
| err = input_register_device(mtouch->dev); |
| if (err) |
| goto fail3; |
| |
| return 0; |
| |
| fail3: serio_close(serio); |
| fail2: serio_set_drvdata(serio, NULL); |
| fail1: input_free_device(input_dev); |
| kfree(mtouch); |
| return err; |
| } |
| |
| /* |
| * The serio driver structure. |
| */ |
| |
| static const struct serio_device_id mtouch_serio_ids[] = { |
| { |
| .type = SERIO_RS232, |
| .proto = SERIO_MICROTOUCH, |
| .id = SERIO_ANY, |
| .extra = SERIO_ANY, |
| }, |
| { 0 } |
| }; |
| |
| MODULE_DEVICE_TABLE(serio, mtouch_serio_ids); |
| |
| static struct serio_driver mtouch_drv = { |
| .driver = { |
| .name = "mtouch", |
| }, |
| .description = DRIVER_DESC, |
| .id_table = mtouch_serio_ids, |
| .interrupt = mtouch_interrupt, |
| .connect = mtouch_connect, |
| .disconnect = mtouch_disconnect, |
| }; |
| |
| module_serio_driver(mtouch_drv); |