| /* |
| * Weida HiTech WDT87xx TouchScreen I2C driver |
| * |
| * Copyright (c) 2015 Weida Hi-Tech Co., Ltd. |
| * HN Chen <hn.chen@weidahitech.com> |
| * |
| * This software is licensed under the terms of the GNU General Public |
| * License, as published by the Free Software Foundation, and |
| * may be copied, distributed, and modified under those terms. |
| */ |
| |
| #include <linux/i2c.h> |
| #include <linux/input.h> |
| #include <linux/interrupt.h> |
| #include <linux/delay.h> |
| #include <linux/irq.h> |
| #include <linux/io.h> |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/firmware.h> |
| #include <linux/input/mt.h> |
| #include <linux/acpi.h> |
| #include <linux/unaligned.h> |
| |
| #define WDT87XX_NAME "wdt87xx_i2c" |
| #define WDT87XX_FW_NAME "wdt87xx_fw.bin" |
| #define WDT87XX_CFG_NAME "wdt87xx_cfg.bin" |
| |
| #define MODE_ACTIVE 0x01 |
| #define MODE_READY 0x02 |
| #define MODE_IDLE 0x03 |
| #define MODE_SLEEP 0x04 |
| #define MODE_STOP 0xFF |
| |
| #define WDT_MAX_FINGER 10 |
| #define WDT_RAW_BUF_COUNT 54 |
| #define WDT_V1_RAW_BUF_COUNT 74 |
| #define WDT_FIRMWARE_ID 0xa9e368f5 |
| |
| #define PG_SIZE 0x1000 |
| #define MAX_RETRIES 3 |
| |
| #define MAX_UNIT_AXIS 0x7FFF |
| |
| #define PKT_READ_SIZE 72 |
| #define PKT_WRITE_SIZE 80 |
| |
| /* the finger definition of the report event */ |
| #define FINGER_EV_OFFSET_ID 0 |
| #define FINGER_EV_OFFSET_X 1 |
| #define FINGER_EV_OFFSET_Y 3 |
| #define FINGER_EV_SIZE 5 |
| |
| #define FINGER_EV_V1_OFFSET_ID 0 |
| #define FINGER_EV_V1_OFFSET_W 1 |
| #define FINGER_EV_V1_OFFSET_P 2 |
| #define FINGER_EV_V1_OFFSET_X 3 |
| #define FINGER_EV_V1_OFFSET_Y 5 |
| #define FINGER_EV_V1_SIZE 7 |
| |
| /* The definition of a report packet */ |
| #define TOUCH_PK_OFFSET_REPORT_ID 0 |
| #define TOUCH_PK_OFFSET_EVENT 1 |
| #define TOUCH_PK_OFFSET_SCAN_TIME 51 |
| #define TOUCH_PK_OFFSET_FNGR_NUM 53 |
| |
| #define TOUCH_PK_V1_OFFSET_REPORT_ID 0 |
| #define TOUCH_PK_V1_OFFSET_EVENT 1 |
| #define TOUCH_PK_V1_OFFSET_SCAN_TIME 71 |
| #define TOUCH_PK_V1_OFFSET_FNGR_NUM 73 |
| |
| /* The definition of the controller parameters */ |
| #define CTL_PARAM_OFFSET_FW_ID 0 |
| #define CTL_PARAM_OFFSET_PLAT_ID 2 |
| #define CTL_PARAM_OFFSET_XMLS_ID1 4 |
| #define CTL_PARAM_OFFSET_XMLS_ID2 6 |
| #define CTL_PARAM_OFFSET_PHY_CH_X 8 |
| #define CTL_PARAM_OFFSET_PHY_CH_Y 10 |
| #define CTL_PARAM_OFFSET_PHY_X0 12 |
| #define CTL_PARAM_OFFSET_PHY_X1 14 |
| #define CTL_PARAM_OFFSET_PHY_Y0 16 |
| #define CTL_PARAM_OFFSET_PHY_Y1 18 |
| #define CTL_PARAM_OFFSET_PHY_W 22 |
| #define CTL_PARAM_OFFSET_PHY_H 24 |
| #define CTL_PARAM_OFFSET_FACTOR 32 |
| |
| /* The definition of the device descriptor */ |
| #define WDT_GD_DEVICE 1 |
| #define DEV_DESC_OFFSET_VID 8 |
| #define DEV_DESC_OFFSET_PID 10 |
| |
| /* Communication commands */ |
| #define PACKET_SIZE 56 |
| #define VND_REQ_READ 0x06 |
| #define VND_READ_DATA 0x07 |
| #define VND_REQ_WRITE 0x08 |
| |
| #define VND_CMD_START 0x00 |
| #define VND_CMD_STOP 0x01 |
| #define VND_CMD_RESET 0x09 |
| |
| #define VND_CMD_ERASE 0x1A |
| |
| #define VND_GET_CHECKSUM 0x66 |
| |
| #define VND_SET_DATA 0x83 |
| #define VND_SET_COMMAND_DATA 0x84 |
| #define VND_SET_CHECKSUM_CALC 0x86 |
| #define VND_SET_CHECKSUM_LENGTH 0x87 |
| |
| #define VND_CMD_SFLCK 0xFC |
| #define VND_CMD_SFUNL 0xFD |
| |
| #define CMD_SFLCK_KEY 0xC39B |
| #define CMD_SFUNL_KEY 0x95DA |
| |
| #define STRIDX_PLATFORM_ID 0x80 |
| #define STRIDX_PARAMETERS 0x81 |
| |
| #define CMD_BUF_SIZE 8 |
| #define PKT_BUF_SIZE 64 |
| |
| /* The definition of the command packet */ |
| #define CMD_REPORT_ID_OFFSET 0x0 |
| #define CMD_TYPE_OFFSET 0x1 |
| #define CMD_INDEX_OFFSET 0x2 |
| #define CMD_KEY_OFFSET 0x3 |
| #define CMD_LENGTH_OFFSET 0x4 |
| #define CMD_DATA_OFFSET 0x8 |
| |
| /* The definition of firmware chunk tags */ |
| #define FOURCC_ID_RIFF 0x46464952 |
| #define FOURCC_ID_WHIF 0x46494857 |
| #define FOURCC_ID_FRMT 0x544D5246 |
| #define FOURCC_ID_FRWR 0x52575246 |
| #define FOURCC_ID_CNFG 0x47464E43 |
| |
| #define CHUNK_ID_FRMT FOURCC_ID_FRMT |
| #define CHUNK_ID_FRWR FOURCC_ID_FRWR |
| #define CHUNK_ID_CNFG FOURCC_ID_CNFG |
| |
| #define FW_FOURCC1_OFFSET 0 |
| #define FW_SIZE_OFFSET 4 |
| #define FW_FOURCC2_OFFSET 8 |
| #define FW_PAYLOAD_OFFSET 40 |
| |
| #define FW_CHUNK_ID_OFFSET 0 |
| #define FW_CHUNK_SIZE_OFFSET 4 |
| #define FW_CHUNK_TGT_START_OFFSET 8 |
| #define FW_CHUNK_PAYLOAD_LEN_OFFSET 12 |
| #define FW_CHUNK_SRC_START_OFFSET 16 |
| #define FW_CHUNK_VERSION_OFFSET 20 |
| #define FW_CHUNK_ATTR_OFFSET 24 |
| #define FW_CHUNK_PAYLOAD_OFFSET 32 |
| |
| /* Controller requires minimum 300us between commands */ |
| #define WDT_COMMAND_DELAY_MS 2 |
| #define WDT_FLASH_WRITE_DELAY_MS 4 |
| #define WDT_FLASH_ERASE_DELAY_MS 200 |
| #define WDT_FW_RESET_TIME 2500 |
| |
| struct wdt87xx_sys_param { |
| u16 fw_id; |
| u16 plat_id; |
| u16 xmls_id1; |
| u16 xmls_id2; |
| u16 phy_ch_x; |
| u16 phy_ch_y; |
| u16 phy_w; |
| u16 phy_h; |
| u16 scaling_factor; |
| u32 max_x; |
| u32 max_y; |
| u16 vendor_id; |
| u16 product_id; |
| }; |
| |
| struct wdt87xx_data { |
| struct i2c_client *client; |
| struct input_dev *input; |
| /* Mutex for fw update to prevent concurrent access */ |
| struct mutex fw_mutex; |
| struct wdt87xx_sys_param param; |
| u8 phys[32]; |
| }; |
| |
| static int wdt87xx_i2c_xfer(struct i2c_client *client, |
| void *txdata, size_t txlen, |
| void *rxdata, size_t rxlen) |
| { |
| struct i2c_msg msgs[] = { |
| { |
| .addr = client->addr, |
| .flags = 0, |
| .len = txlen, |
| .buf = txdata, |
| }, |
| { |
| .addr = client->addr, |
| .flags = I2C_M_RD, |
| .len = rxlen, |
| .buf = rxdata, |
| }, |
| }; |
| int error; |
| int ret; |
| |
| ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); |
| if (ret != ARRAY_SIZE(msgs)) { |
| error = ret < 0 ? ret : -EIO; |
| dev_err(&client->dev, "%s: i2c transfer failed: %d\n", |
| __func__, error); |
| return error; |
| } |
| |
| return 0; |
| } |
| |
| static int wdt87xx_get_desc(struct i2c_client *client, u8 desc_idx, |
| u8 *buf, size_t len) |
| { |
| u8 tx_buf[] = { 0x22, 0x00, 0x10, 0x0E, 0x23, 0x00 }; |
| int error; |
| |
| tx_buf[2] |= desc_idx & 0xF; |
| |
| error = wdt87xx_i2c_xfer(client, tx_buf, sizeof(tx_buf), |
| buf, len); |
| if (error) { |
| dev_err(&client->dev, "get desc failed: %d\n", error); |
| return error; |
| } |
| |
| if (buf[0] != len) { |
| dev_err(&client->dev, "unexpected response to get desc: %d\n", |
| buf[0]); |
| return -EINVAL; |
| } |
| |
| mdelay(WDT_COMMAND_DELAY_MS); |
| |
| return 0; |
| } |
| |
| static int wdt87xx_get_string(struct i2c_client *client, u8 str_idx, |
| u8 *buf, size_t len) |
| { |
| u8 tx_buf[] = { 0x22, 0x00, 0x13, 0x0E, str_idx, 0x23, 0x00 }; |
| u8 rx_buf[PKT_WRITE_SIZE]; |
| size_t rx_len = len + 2; |
| int error; |
| |
| if (rx_len > sizeof(rx_buf)) |
| return -EINVAL; |
| |
| error = wdt87xx_i2c_xfer(client, tx_buf, sizeof(tx_buf), |
| rx_buf, rx_len); |
| if (error) { |
| dev_err(&client->dev, "get string failed: %d\n", error); |
| return error; |
| } |
| |
| if (rx_buf[1] != 0x03) { |
| dev_err(&client->dev, "unexpected response to get string: %d\n", |
| rx_buf[1]); |
| return -EINVAL; |
| } |
| |
| rx_len = min_t(size_t, len, rx_buf[0]); |
| memcpy(buf, &rx_buf[2], rx_len); |
| |
| mdelay(WDT_COMMAND_DELAY_MS); |
| |
| return 0; |
| } |
| |
| static int wdt87xx_get_feature(struct i2c_client *client, |
| u8 *buf, size_t buf_size) |
| { |
| u8 tx_buf[8]; |
| u8 rx_buf[PKT_WRITE_SIZE]; |
| size_t tx_len = 0; |
| size_t rx_len = buf_size + 2; |
| int error; |
| |
| if (rx_len > sizeof(rx_buf)) |
| return -EINVAL; |
| |
| /* Get feature command packet */ |
| tx_buf[tx_len++] = 0x22; |
| tx_buf[tx_len++] = 0x00; |
| if (buf[CMD_REPORT_ID_OFFSET] > 0xF) { |
| tx_buf[tx_len++] = 0x30; |
| tx_buf[tx_len++] = 0x02; |
| tx_buf[tx_len++] = buf[CMD_REPORT_ID_OFFSET]; |
| } else { |
| tx_buf[tx_len++] = 0x30 | buf[CMD_REPORT_ID_OFFSET]; |
| tx_buf[tx_len++] = 0x02; |
| } |
| tx_buf[tx_len++] = 0x23; |
| tx_buf[tx_len++] = 0x00; |
| |
| error = wdt87xx_i2c_xfer(client, tx_buf, tx_len, rx_buf, rx_len); |
| if (error) { |
| dev_err(&client->dev, "get feature failed: %d\n", error); |
| return error; |
| } |
| |
| rx_len = min_t(size_t, buf_size, get_unaligned_le16(rx_buf)); |
| memcpy(buf, &rx_buf[2], rx_len); |
| |
| mdelay(WDT_COMMAND_DELAY_MS); |
| |
| return 0; |
| } |
| |
| static int wdt87xx_set_feature(struct i2c_client *client, |
| const u8 *buf, size_t buf_size) |
| { |
| u8 tx_buf[PKT_WRITE_SIZE]; |
| int tx_len = 0; |
| int error; |
| |
| /* Set feature command packet */ |
| tx_buf[tx_len++] = 0x22; |
| tx_buf[tx_len++] = 0x00; |
| if (buf[CMD_REPORT_ID_OFFSET] > 0xF) { |
| tx_buf[tx_len++] = 0x30; |
| tx_buf[tx_len++] = 0x03; |
| tx_buf[tx_len++] = buf[CMD_REPORT_ID_OFFSET]; |
| } else { |
| tx_buf[tx_len++] = 0x30 | buf[CMD_REPORT_ID_OFFSET]; |
| tx_buf[tx_len++] = 0x03; |
| } |
| tx_buf[tx_len++] = 0x23; |
| tx_buf[tx_len++] = 0x00; |
| tx_buf[tx_len++] = (buf_size & 0xFF); |
| tx_buf[tx_len++] = ((buf_size & 0xFF00) >> 8); |
| |
| if (tx_len + buf_size > sizeof(tx_buf)) |
| return -EINVAL; |
| |
| memcpy(&tx_buf[tx_len], buf, buf_size); |
| tx_len += buf_size; |
| |
| error = i2c_master_send(client, tx_buf, tx_len); |
| if (error < 0) { |
| dev_err(&client->dev, "set feature failed: %d\n", error); |
| return error; |
| } |
| |
| mdelay(WDT_COMMAND_DELAY_MS); |
| |
| return 0; |
| } |
| |
| static int wdt87xx_send_command(struct i2c_client *client, int cmd, int value) |
| { |
| u8 cmd_buf[CMD_BUF_SIZE]; |
| |
| /* Set the command packet */ |
| cmd_buf[CMD_REPORT_ID_OFFSET] = VND_REQ_WRITE; |
| cmd_buf[CMD_TYPE_OFFSET] = VND_SET_COMMAND_DATA; |
| put_unaligned_le16((u16)cmd, &cmd_buf[CMD_INDEX_OFFSET]); |
| |
| switch (cmd) { |
| case VND_CMD_START: |
| case VND_CMD_STOP: |
| case VND_CMD_RESET: |
| /* Mode selector */ |
| put_unaligned_le32((value & 0xFF), &cmd_buf[CMD_LENGTH_OFFSET]); |
| break; |
| |
| case VND_CMD_SFLCK: |
| put_unaligned_le16(CMD_SFLCK_KEY, &cmd_buf[CMD_KEY_OFFSET]); |
| break; |
| |
| case VND_CMD_SFUNL: |
| put_unaligned_le16(CMD_SFUNL_KEY, &cmd_buf[CMD_KEY_OFFSET]); |
| break; |
| |
| case VND_CMD_ERASE: |
| case VND_SET_CHECKSUM_CALC: |
| case VND_SET_CHECKSUM_LENGTH: |
| put_unaligned_le32(value, &cmd_buf[CMD_KEY_OFFSET]); |
| break; |
| |
| default: |
| cmd_buf[CMD_REPORT_ID_OFFSET] = 0; |
| dev_err(&client->dev, "Invalid command: %d\n", cmd); |
| return -EINVAL; |
| } |
| |
| return wdt87xx_set_feature(client, cmd_buf, sizeof(cmd_buf)); |
| } |
| |
| static int wdt87xx_sw_reset(struct i2c_client *client) |
| { |
| int error; |
| |
| dev_dbg(&client->dev, "resetting device now\n"); |
| |
| error = wdt87xx_send_command(client, VND_CMD_RESET, 0); |
| if (error) { |
| dev_err(&client->dev, "reset failed\n"); |
| return error; |
| } |
| |
| /* Wait the device to be ready */ |
| msleep(WDT_FW_RESET_TIME); |
| |
| return 0; |
| } |
| |
| static const void *wdt87xx_get_fw_chunk(const struct firmware *fw, u32 id) |
| { |
| size_t pos = FW_PAYLOAD_OFFSET; |
| u32 chunk_id, chunk_size; |
| |
| while (pos < fw->size) { |
| chunk_id = get_unaligned_le32(fw->data + |
| pos + FW_CHUNK_ID_OFFSET); |
| if (chunk_id == id) |
| return fw->data + pos; |
| |
| chunk_size = get_unaligned_le32(fw->data + |
| pos + FW_CHUNK_SIZE_OFFSET); |
| pos += chunk_size + 2 * sizeof(u32); /* chunk ID + size */ |
| } |
| |
| return NULL; |
| } |
| |
| static int wdt87xx_get_sysparam(struct i2c_client *client, |
| struct wdt87xx_sys_param *param) |
| { |
| u8 buf[PKT_READ_SIZE]; |
| int error; |
| |
| error = wdt87xx_get_desc(client, WDT_GD_DEVICE, buf, 18); |
| if (error) { |
| dev_err(&client->dev, "failed to get device desc\n"); |
| return error; |
| } |
| |
| param->vendor_id = get_unaligned_le16(buf + DEV_DESC_OFFSET_VID); |
| param->product_id = get_unaligned_le16(buf + DEV_DESC_OFFSET_PID); |
| |
| error = wdt87xx_get_string(client, STRIDX_PARAMETERS, buf, 34); |
| if (error) { |
| dev_err(&client->dev, "failed to get parameters\n"); |
| return error; |
| } |
| |
| param->xmls_id1 = get_unaligned_le16(buf + CTL_PARAM_OFFSET_XMLS_ID1); |
| param->xmls_id2 = get_unaligned_le16(buf + CTL_PARAM_OFFSET_XMLS_ID2); |
| param->phy_ch_x = get_unaligned_le16(buf + CTL_PARAM_OFFSET_PHY_CH_X); |
| param->phy_ch_y = get_unaligned_le16(buf + CTL_PARAM_OFFSET_PHY_CH_Y); |
| param->phy_w = get_unaligned_le16(buf + CTL_PARAM_OFFSET_PHY_W) / 10; |
| param->phy_h = get_unaligned_le16(buf + CTL_PARAM_OFFSET_PHY_H) / 10; |
| |
| /* Get the scaling factor of pixel to logical coordinate */ |
| param->scaling_factor = |
| get_unaligned_le16(buf + CTL_PARAM_OFFSET_FACTOR); |
| |
| param->max_x = MAX_UNIT_AXIS; |
| param->max_y = DIV_ROUND_CLOSEST(MAX_UNIT_AXIS * param->phy_h, |
| param->phy_w); |
| |
| error = wdt87xx_get_string(client, STRIDX_PLATFORM_ID, buf, 8); |
| if (error) { |
| dev_err(&client->dev, "failed to get platform id\n"); |
| return error; |
| } |
| |
| param->plat_id = buf[1]; |
| |
| buf[0] = 0xf2; |
| error = wdt87xx_get_feature(client, buf, 16); |
| if (error) { |
| dev_err(&client->dev, "failed to get firmware id\n"); |
| return error; |
| } |
| |
| if (buf[0] != 0xf2) { |
| dev_err(&client->dev, "wrong id of fw response: 0x%x\n", |
| buf[0]); |
| return -EINVAL; |
| } |
| |
| param->fw_id = get_unaligned_le16(&buf[1]); |
| |
| dev_info(&client->dev, |
| "fw_id: 0x%x, plat_id: 0x%x, xml_id1: %04x, xml_id2: %04x\n", |
| param->fw_id, param->plat_id, |
| param->xmls_id1, param->xmls_id2); |
| |
| return 0; |
| } |
| |
| static int wdt87xx_validate_firmware(struct wdt87xx_data *wdt, |
| const struct firmware *fw) |
| { |
| const void *fw_chunk; |
| u32 data1, data2; |
| u32 size; |
| u8 fw_chip_id; |
| u8 chip_id; |
| |
| data1 = get_unaligned_le32(fw->data + FW_FOURCC1_OFFSET); |
| data2 = get_unaligned_le32(fw->data + FW_FOURCC2_OFFSET); |
| if (data1 != FOURCC_ID_RIFF || data2 != FOURCC_ID_WHIF) { |
| dev_err(&wdt->client->dev, "check fw tag failed\n"); |
| return -EINVAL; |
| } |
| |
| size = get_unaligned_le32(fw->data + FW_SIZE_OFFSET); |
| if (size != fw->size) { |
| dev_err(&wdt->client->dev, |
| "fw size mismatch: expected %d, actual %zu\n", |
| size, fw->size); |
| return -EINVAL; |
| } |
| |
| /* |
| * Get the chip_id from the firmware. Make sure that it is the |
| * right controller to do the firmware and config update. |
| */ |
| fw_chunk = wdt87xx_get_fw_chunk(fw, CHUNK_ID_FRWR); |
| if (!fw_chunk) { |
| dev_err(&wdt->client->dev, |
| "unable to locate firmware chunk\n"); |
| return -EINVAL; |
| } |
| |
| fw_chip_id = (get_unaligned_le32(fw_chunk + |
| FW_CHUNK_VERSION_OFFSET) >> 12) & 0xF; |
| chip_id = (wdt->param.fw_id >> 12) & 0xF; |
| |
| if (fw_chip_id != chip_id) { |
| dev_err(&wdt->client->dev, |
| "fw version mismatch: fw %d vs. chip %d\n", |
| fw_chip_id, chip_id); |
| return -ENODEV; |
| } |
| |
| return 0; |
| } |
| |
| static int wdt87xx_validate_fw_chunk(const void *data, int id) |
| { |
| if (id == CHUNK_ID_FRWR) { |
| u32 fw_id; |
| |
| fw_id = get_unaligned_le32(data + FW_CHUNK_PAYLOAD_OFFSET); |
| if (fw_id != WDT_FIRMWARE_ID) |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int wdt87xx_write_data(struct i2c_client *client, const char *data, |
| u32 address, int length) |
| { |
| u16 packet_size; |
| int count = 0; |
| int error; |
| u8 pkt_buf[PKT_BUF_SIZE]; |
| |
| /* Address and length should be 4 bytes aligned */ |
| if ((address & 0x3) != 0 || (length & 0x3) != 0) { |
| dev_err(&client->dev, |
| "addr & len must be 4 bytes aligned %x, %x\n", |
| address, length); |
| return -EINVAL; |
| } |
| |
| while (length) { |
| packet_size = min(length, PACKET_SIZE); |
| |
| pkt_buf[CMD_REPORT_ID_OFFSET] = VND_REQ_WRITE; |
| pkt_buf[CMD_TYPE_OFFSET] = VND_SET_DATA; |
| put_unaligned_le16(packet_size, &pkt_buf[CMD_INDEX_OFFSET]); |
| put_unaligned_le32(address, &pkt_buf[CMD_LENGTH_OFFSET]); |
| memcpy(&pkt_buf[CMD_DATA_OFFSET], data, packet_size); |
| |
| error = wdt87xx_set_feature(client, pkt_buf, sizeof(pkt_buf)); |
| if (error) |
| return error; |
| |
| length -= packet_size; |
| data += packet_size; |
| address += packet_size; |
| |
| /* Wait for the controller to finish the write */ |
| mdelay(WDT_FLASH_WRITE_DELAY_MS); |
| |
| if ((++count % 32) == 0) { |
| /* Delay for fw to clear watch dog */ |
| msleep(20); |
| } |
| } |
| |
| return 0; |
| } |
| |
| static u16 misr(u16 cur_value, u8 new_value) |
| { |
| u32 a, b; |
| u32 bit0; |
| u32 y; |
| |
| a = cur_value; |
| b = new_value; |
| bit0 = a ^ (b & 1); |
| bit0 ^= a >> 1; |
| bit0 ^= a >> 2; |
| bit0 ^= a >> 4; |
| bit0 ^= a >> 5; |
| bit0 ^= a >> 7; |
| bit0 ^= a >> 11; |
| bit0 ^= a >> 15; |
| y = (a << 1) ^ b; |
| y = (y & ~1) | (bit0 & 1); |
| |
| return (u16)y; |
| } |
| |
| static u16 wdt87xx_calculate_checksum(const u8 *data, size_t length) |
| { |
| u16 checksum = 0; |
| size_t i; |
| |
| for (i = 0; i < length; i++) |
| checksum = misr(checksum, data[i]); |
| |
| return checksum; |
| } |
| |
| static int wdt87xx_get_checksum(struct i2c_client *client, u16 *checksum, |
| u32 address, int length) |
| { |
| int error; |
| int time_delay; |
| u8 pkt_buf[PKT_BUF_SIZE]; |
| u8 cmd_buf[CMD_BUF_SIZE]; |
| |
| error = wdt87xx_send_command(client, VND_SET_CHECKSUM_LENGTH, length); |
| if (error) { |
| dev_err(&client->dev, "failed to set checksum length\n"); |
| return error; |
| } |
| |
| error = wdt87xx_send_command(client, VND_SET_CHECKSUM_CALC, address); |
| if (error) { |
| dev_err(&client->dev, "failed to set checksum address\n"); |
| return error; |
| } |
| |
| /* Wait the operation to complete */ |
| time_delay = DIV_ROUND_UP(length, 1024); |
| msleep(time_delay * 30); |
| |
| memset(cmd_buf, 0, sizeof(cmd_buf)); |
| cmd_buf[CMD_REPORT_ID_OFFSET] = VND_REQ_READ; |
| cmd_buf[CMD_TYPE_OFFSET] = VND_GET_CHECKSUM; |
| error = wdt87xx_set_feature(client, cmd_buf, sizeof(cmd_buf)); |
| if (error) { |
| dev_err(&client->dev, "failed to request checksum\n"); |
| return error; |
| } |
| |
| memset(pkt_buf, 0, sizeof(pkt_buf)); |
| pkt_buf[CMD_REPORT_ID_OFFSET] = VND_READ_DATA; |
| error = wdt87xx_get_feature(client, pkt_buf, sizeof(pkt_buf)); |
| if (error) { |
| dev_err(&client->dev, "failed to read checksum\n"); |
| return error; |
| } |
| |
| *checksum = get_unaligned_le16(&pkt_buf[CMD_DATA_OFFSET]); |
| return 0; |
| } |
| |
| static int wdt87xx_write_firmware(struct i2c_client *client, const void *chunk) |
| { |
| u32 start_addr = get_unaligned_le32(chunk + FW_CHUNK_TGT_START_OFFSET); |
| u32 size = get_unaligned_le32(chunk + FW_CHUNK_PAYLOAD_LEN_OFFSET); |
| const void *data = chunk + FW_CHUNK_PAYLOAD_OFFSET; |
| int error; |
| int err1; |
| int page_size; |
| int retry = 0; |
| u16 device_checksum, firmware_checksum; |
| |
| dev_dbg(&client->dev, "start 4k page program\n"); |
| |
| error = wdt87xx_send_command(client, VND_CMD_STOP, MODE_STOP); |
| if (error) { |
| dev_err(&client->dev, "stop report mode failed\n"); |
| return error; |
| } |
| |
| error = wdt87xx_send_command(client, VND_CMD_SFUNL, 0); |
| if (error) { |
| dev_err(&client->dev, "unlock failed\n"); |
| goto out_enable_reporting; |
| } |
| |
| mdelay(10); |
| |
| while (size) { |
| dev_dbg(&client->dev, "%s: %x, %x\n", __func__, |
| start_addr, size); |
| |
| page_size = min_t(u32, size, PG_SIZE); |
| size -= page_size; |
| |
| for (retry = 0; retry < MAX_RETRIES; retry++) { |
| error = wdt87xx_send_command(client, VND_CMD_ERASE, |
| start_addr); |
| if (error) { |
| dev_err(&client->dev, |
| "erase failed at %#08x\n", start_addr); |
| break; |
| } |
| |
| msleep(WDT_FLASH_ERASE_DELAY_MS); |
| |
| error = wdt87xx_write_data(client, data, start_addr, |
| page_size); |
| if (error) { |
| dev_err(&client->dev, |
| "write failed at %#08x (%d bytes)\n", |
| start_addr, page_size); |
| break; |
| } |
| |
| error = wdt87xx_get_checksum(client, &device_checksum, |
| start_addr, page_size); |
| if (error) { |
| dev_err(&client->dev, |
| "failed to retrieve checksum for %#08x (len: %d)\n", |
| start_addr, page_size); |
| break; |
| } |
| |
| firmware_checksum = |
| wdt87xx_calculate_checksum(data, page_size); |
| |
| if (device_checksum == firmware_checksum) |
| break; |
| |
| dev_err(&client->dev, |
| "checksum fail: %d vs %d, retry %d\n", |
| device_checksum, firmware_checksum, retry); |
| } |
| |
| if (retry == MAX_RETRIES) { |
| dev_err(&client->dev, "page write failed\n"); |
| error = -EIO; |
| goto out_lock_device; |
| } |
| |
| start_addr = start_addr + page_size; |
| data = data + page_size; |
| } |
| |
| out_lock_device: |
| err1 = wdt87xx_send_command(client, VND_CMD_SFLCK, 0); |
| if (err1) |
| dev_err(&client->dev, "lock failed\n"); |
| |
| mdelay(10); |
| |
| out_enable_reporting: |
| err1 = wdt87xx_send_command(client, VND_CMD_START, 0); |
| if (err1) |
| dev_err(&client->dev, "start to report failed\n"); |
| |
| return error ? error : err1; |
| } |
| |
| static int wdt87xx_load_chunk(struct i2c_client *client, |
| const struct firmware *fw, u32 ck_id) |
| { |
| const void *chunk; |
| int error; |
| |
| chunk = wdt87xx_get_fw_chunk(fw, ck_id); |
| if (!chunk) { |
| dev_err(&client->dev, "unable to locate chunk (type %d)\n", |
| ck_id); |
| return -EINVAL; |
| } |
| |
| error = wdt87xx_validate_fw_chunk(chunk, ck_id); |
| if (error) { |
| dev_err(&client->dev, "invalid chunk (type %d): %d\n", |
| ck_id, error); |
| return error; |
| } |
| |
| error = wdt87xx_write_firmware(client, chunk); |
| if (error) { |
| dev_err(&client->dev, |
| "failed to write fw chunk (type %d): %d\n", |
| ck_id, error); |
| return error; |
| } |
| |
| return 0; |
| } |
| |
| static int wdt87xx_do_update_firmware(struct i2c_client *client, |
| const struct firmware *fw, |
| unsigned int chunk_id) |
| { |
| struct wdt87xx_data *wdt = i2c_get_clientdata(client); |
| int error; |
| |
| error = wdt87xx_validate_firmware(wdt, fw); |
| if (error) |
| return error; |
| |
| error = mutex_lock_interruptible(&wdt->fw_mutex); |
| if (error) |
| return error; |
| |
| disable_irq(client->irq); |
| |
| error = wdt87xx_load_chunk(client, fw, chunk_id); |
| if (error) { |
| dev_err(&client->dev, |
| "firmware load failed (type: %d): %d\n", |
| chunk_id, error); |
| goto out; |
| } |
| |
| error = wdt87xx_sw_reset(client); |
| if (error) { |
| dev_err(&client->dev, "soft reset failed: %d\n", error); |
| goto out; |
| } |
| |
| /* Refresh the parameters */ |
| error = wdt87xx_get_sysparam(client, &wdt->param); |
| if (error) |
| dev_err(&client->dev, |
| "failed to refresh system parameters: %d\n", error); |
| out: |
| enable_irq(client->irq); |
| mutex_unlock(&wdt->fw_mutex); |
| |
| return error ? error : 0; |
| } |
| |
| static int wdt87xx_update_firmware(struct device *dev, |
| const char *fw_name, unsigned int chunk_id) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| const struct firmware *fw; |
| int error; |
| |
| error = request_firmware(&fw, fw_name, dev); |
| if (error) { |
| dev_err(&client->dev, "unable to retrieve firmware %s: %d\n", |
| fw_name, error); |
| return error; |
| } |
| |
| error = wdt87xx_do_update_firmware(client, fw, chunk_id); |
| |
| release_firmware(fw); |
| |
| return error ? error : 0; |
| } |
| |
| static ssize_t config_csum_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct wdt87xx_data *wdt = i2c_get_clientdata(client); |
| u32 cfg_csum; |
| |
| cfg_csum = wdt->param.xmls_id1; |
| cfg_csum = (cfg_csum << 16) | wdt->param.xmls_id2; |
| |
| return sysfs_emit(buf, "%x\n", cfg_csum); |
| } |
| |
| static ssize_t fw_version_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct wdt87xx_data *wdt = i2c_get_clientdata(client); |
| |
| return sysfs_emit(buf, "%x\n", wdt->param.fw_id); |
| } |
| |
| static ssize_t plat_id_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct wdt87xx_data *wdt = i2c_get_clientdata(client); |
| |
| return sysfs_emit(buf, "%x\n", wdt->param.plat_id); |
| } |
| |
| static ssize_t update_config_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| int error; |
| |
| error = wdt87xx_update_firmware(dev, WDT87XX_CFG_NAME, CHUNK_ID_CNFG); |
| |
| return error ? error : count; |
| } |
| |
| static ssize_t update_fw_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| int error; |
| |
| error = wdt87xx_update_firmware(dev, WDT87XX_FW_NAME, CHUNK_ID_FRWR); |
| |
| return error ? error : count; |
| } |
| |
| static DEVICE_ATTR_RO(config_csum); |
| static DEVICE_ATTR_RO(fw_version); |
| static DEVICE_ATTR_RO(plat_id); |
| static DEVICE_ATTR_WO(update_config); |
| static DEVICE_ATTR_WO(update_fw); |
| |
| static struct attribute *wdt87xx_attrs[] = { |
| &dev_attr_config_csum.attr, |
| &dev_attr_fw_version.attr, |
| &dev_attr_plat_id.attr, |
| &dev_attr_update_config.attr, |
| &dev_attr_update_fw.attr, |
| NULL |
| }; |
| ATTRIBUTE_GROUPS(wdt87xx); |
| |
| static void wdt87xx_report_contact(struct input_dev *input, |
| struct wdt87xx_sys_param *param, |
| u8 *buf) |
| { |
| int finger_id; |
| u32 x, y, w; |
| u8 p; |
| |
| finger_id = (buf[FINGER_EV_V1_OFFSET_ID] >> 3) - 1; |
| if (finger_id < 0) |
| return; |
| |
| /* Check if this is an active contact */ |
| if (!(buf[FINGER_EV_V1_OFFSET_ID] & 0x1)) |
| return; |
| |
| w = buf[FINGER_EV_V1_OFFSET_W]; |
| w *= param->scaling_factor; |
| |
| p = buf[FINGER_EV_V1_OFFSET_P]; |
| |
| x = get_unaligned_le16(buf + FINGER_EV_V1_OFFSET_X); |
| |
| y = get_unaligned_le16(buf + FINGER_EV_V1_OFFSET_Y); |
| y = DIV_ROUND_CLOSEST(y * param->phy_h, param->phy_w); |
| |
| /* Refuse incorrect coordinates */ |
| if (x > param->max_x || y > param->max_y) |
| return; |
| |
| dev_dbg(input->dev.parent, "tip on (%d), x(%d), y(%d)\n", |
| finger_id, x, y); |
| |
| input_mt_slot(input, finger_id); |
| input_mt_report_slot_state(input, MT_TOOL_FINGER, 1); |
| input_report_abs(input, ABS_MT_TOUCH_MAJOR, w); |
| input_report_abs(input, ABS_MT_PRESSURE, p); |
| input_report_abs(input, ABS_MT_POSITION_X, x); |
| input_report_abs(input, ABS_MT_POSITION_Y, y); |
| } |
| |
| static irqreturn_t wdt87xx_ts_interrupt(int irq, void *dev_id) |
| { |
| struct wdt87xx_data *wdt = dev_id; |
| struct i2c_client *client = wdt->client; |
| int i, fingers; |
| int error; |
| u8 raw_buf[WDT_V1_RAW_BUF_COUNT] = {0}; |
| |
| error = i2c_master_recv(client, raw_buf, WDT_V1_RAW_BUF_COUNT); |
| if (error < 0) { |
| dev_err(&client->dev, "read v1 raw data failed: %d\n", error); |
| goto irq_exit; |
| } |
| |
| fingers = raw_buf[TOUCH_PK_V1_OFFSET_FNGR_NUM]; |
| if (!fingers) |
| goto irq_exit; |
| |
| for (i = 0; i < WDT_MAX_FINGER; i++) |
| wdt87xx_report_contact(wdt->input, |
| &wdt->param, |
| &raw_buf[TOUCH_PK_V1_OFFSET_EVENT + |
| i * FINGER_EV_V1_SIZE]); |
| |
| input_mt_sync_frame(wdt->input); |
| input_sync(wdt->input); |
| |
| irq_exit: |
| return IRQ_HANDLED; |
| } |
| |
| static int wdt87xx_ts_create_input_device(struct wdt87xx_data *wdt) |
| { |
| struct device *dev = &wdt->client->dev; |
| struct input_dev *input; |
| unsigned int res = DIV_ROUND_CLOSEST(MAX_UNIT_AXIS, wdt->param.phy_w); |
| int error; |
| |
| input = devm_input_allocate_device(dev); |
| if (!input) { |
| dev_err(dev, "failed to allocate input device\n"); |
| return -ENOMEM; |
| } |
| wdt->input = input; |
| |
| input->name = "WDT87xx Touchscreen"; |
| input->id.bustype = BUS_I2C; |
| input->id.vendor = wdt->param.vendor_id; |
| input->id.product = wdt->param.product_id; |
| input->phys = wdt->phys; |
| |
| input_set_abs_params(input, ABS_MT_POSITION_X, 0, |
| wdt->param.max_x, 0, 0); |
| input_set_abs_params(input, ABS_MT_POSITION_Y, 0, |
| wdt->param.max_y, 0, 0); |
| input_abs_set_res(input, ABS_MT_POSITION_X, res); |
| input_abs_set_res(input, ABS_MT_POSITION_Y, res); |
| |
| input_set_abs_params(input, ABS_MT_TOUCH_MAJOR, |
| 0, wdt->param.max_x, 0, 0); |
| input_set_abs_params(input, ABS_MT_PRESSURE, 0, 0xFF, 0, 0); |
| |
| input_mt_init_slots(input, WDT_MAX_FINGER, |
| INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED); |
| |
| error = input_register_device(input); |
| if (error) { |
| dev_err(dev, "failed to register input device: %d\n", error); |
| return error; |
| } |
| |
| return 0; |
| } |
| |
| static int wdt87xx_ts_probe(struct i2c_client *client) |
| { |
| struct wdt87xx_data *wdt; |
| int error; |
| |
| dev_dbg(&client->dev, "adapter=%d, client irq: %d\n", |
| client->adapter->nr, client->irq); |
| |
| /* Check if the I2C function is ok in this adaptor */ |
| if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) |
| return -ENXIO; |
| |
| wdt = devm_kzalloc(&client->dev, sizeof(*wdt), GFP_KERNEL); |
| if (!wdt) |
| return -ENOMEM; |
| |
| wdt->client = client; |
| mutex_init(&wdt->fw_mutex); |
| i2c_set_clientdata(client, wdt); |
| |
| snprintf(wdt->phys, sizeof(wdt->phys), "i2c-%u-%04x/input0", |
| client->adapter->nr, client->addr); |
| |
| error = wdt87xx_get_sysparam(client, &wdt->param); |
| if (error) |
| return error; |
| |
| error = wdt87xx_ts_create_input_device(wdt); |
| if (error) |
| return error; |
| |
| error = devm_request_threaded_irq(&client->dev, client->irq, |
| NULL, wdt87xx_ts_interrupt, |
| IRQF_ONESHOT, |
| client->name, wdt); |
| if (error) { |
| dev_err(&client->dev, "request irq failed: %d\n", error); |
| return error; |
| } |
| |
| return 0; |
| } |
| |
| static int wdt87xx_suspend(struct device *dev) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| int error; |
| |
| disable_irq(client->irq); |
| |
| error = wdt87xx_send_command(client, VND_CMD_STOP, MODE_IDLE); |
| if (error) { |
| enable_irq(client->irq); |
| dev_err(&client->dev, |
| "failed to stop device when suspending: %d\n", |
| error); |
| return error; |
| } |
| |
| return 0; |
| } |
| |
| static int wdt87xx_resume(struct device *dev) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| int error; |
| |
| /* |
| * The chip may have been reset while system is resuming, |
| * give it some time to settle. |
| */ |
| msleep(100); |
| |
| error = wdt87xx_send_command(client, VND_CMD_START, 0); |
| if (error) |
| dev_err(&client->dev, |
| "failed to start device when resuming: %d\n", |
| error); |
| |
| enable_irq(client->irq); |
| |
| return 0; |
| } |
| |
| static DEFINE_SIMPLE_DEV_PM_OPS(wdt87xx_pm_ops, wdt87xx_suspend, wdt87xx_resume); |
| |
| static const struct i2c_device_id wdt87xx_dev_id[] = { |
| { WDT87XX_NAME }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, wdt87xx_dev_id); |
| |
| static const struct acpi_device_id wdt87xx_acpi_id[] = { |
| { "WDHT0001", 0 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(acpi, wdt87xx_acpi_id); |
| |
| static struct i2c_driver wdt87xx_driver = { |
| .probe = wdt87xx_ts_probe, |
| .id_table = wdt87xx_dev_id, |
| .driver = { |
| .name = WDT87XX_NAME, |
| .dev_groups = wdt87xx_groups, |
| .pm = pm_sleep_ptr(&wdt87xx_pm_ops), |
| .acpi_match_table = ACPI_PTR(wdt87xx_acpi_id), |
| }, |
| }; |
| module_i2c_driver(wdt87xx_driver); |
| |
| MODULE_AUTHOR("HN Chen <hn.chen@weidahitech.com>"); |
| MODULE_DESCRIPTION("WeidaHiTech WDT87XX Touchscreen driver"); |
| MODULE_LICENSE("GPL"); |