| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * smssdio.c - Siano 1xxx SDIO interface driver |
| * |
| * Copyright 2008 Pierre Ossman |
| * |
| * Based on code by Siano Mobile Silicon, Inc., |
| * Copyright (C) 2006-2008, Uri Shkolnik |
| * |
| * This hardware is a bit odd in that all transfers should be done |
| * to/from the SMSSDIO_DATA register, yet the "increase address" bit |
| * always needs to be set. |
| * |
| * Also, buffers from the card are always aligned to 128 byte |
| * boundaries. |
| */ |
| |
| /* |
| * General cleanup notes: |
| * |
| * - only typedefs should be name *_t |
| * |
| * - use ERR_PTR and friends for smscore_register_device() |
| * |
| * - smscore_getbuffer should zero fields |
| * |
| * Fix stop command |
| */ |
| |
| #include "smscoreapi.h" |
| |
| #include <linux/moduleparam.h> |
| #include <linux/slab.h> |
| #include <linux/firmware.h> |
| #include <linux/delay.h> |
| #include <linux/mmc/card.h> |
| #include <linux/mmc/sdio_func.h> |
| #include <linux/mmc/sdio_ids.h> |
| #include <linux/module.h> |
| |
| #include "sms-cards.h" |
| #include "smsendian.h" |
| |
| /* Registers */ |
| |
| #define SMSSDIO_DATA 0x00 |
| #define SMSSDIO_INT 0x04 |
| #define SMSSDIO_BLOCK_SIZE 128 |
| |
| static const struct sdio_device_id smssdio_ids[] = { |
| {SDIO_DEVICE(SDIO_VENDOR_ID_SIANO, SDIO_DEVICE_ID_SIANO_STELLAR), |
| .driver_data = SMS1XXX_BOARD_SIANO_STELLAR}, |
| {SDIO_DEVICE(SDIO_VENDOR_ID_SIANO, SDIO_DEVICE_ID_SIANO_NOVA_A0), |
| .driver_data = SMS1XXX_BOARD_SIANO_NOVA_A}, |
| {SDIO_DEVICE(SDIO_VENDOR_ID_SIANO, SDIO_DEVICE_ID_SIANO_NOVA_B0), |
| .driver_data = SMS1XXX_BOARD_SIANO_NOVA_B}, |
| {SDIO_DEVICE(SDIO_VENDOR_ID_SIANO, SDIO_DEVICE_ID_SIANO_VEGA_A0), |
| .driver_data = SMS1XXX_BOARD_SIANO_VEGA}, |
| {SDIO_DEVICE(SDIO_VENDOR_ID_SIANO, SDIO_DEVICE_ID_SIANO_VENICE), |
| .driver_data = SMS1XXX_BOARD_SIANO_VEGA}, |
| {SDIO_DEVICE(SDIO_VENDOR_ID_SIANO, SDIO_DEVICE_ID_SIANO_MING), |
| .driver_data = SMS1XXX_BOARD_SIANO_MING}, |
| {SDIO_DEVICE(SDIO_VENDOR_ID_SIANO, SDIO_DEVICE_ID_SIANO_PELE), |
| .driver_data = SMS1XXX_BOARD_SIANO_PELE}, |
| {SDIO_DEVICE(SDIO_VENDOR_ID_SIANO, SDIO_DEVICE_ID_SIANO_RIO), |
| .driver_data = SMS1XXX_BOARD_SIANO_RIO}, |
| {SDIO_DEVICE(SDIO_VENDOR_ID_SIANO, SDIO_DEVICE_ID_SIANO_DENVER_2160), |
| .driver_data = SMS1XXX_BOARD_SIANO_DENVER_2160}, |
| {SDIO_DEVICE(SDIO_VENDOR_ID_SIANO, SDIO_DEVICE_ID_SIANO_DENVER_1530), |
| .driver_data = SMS1XXX_BOARD_SIANO_DENVER_1530}, |
| { /* end: all zeroes */ }, |
| }; |
| |
| MODULE_DEVICE_TABLE(sdio, smssdio_ids); |
| |
| struct smssdio_device { |
| struct sdio_func *func; |
| |
| struct smscore_device_t *coredev; |
| |
| struct smscore_buffer_t *split_cb; |
| }; |
| |
| /*******************************************************************/ |
| /* Siano core callbacks */ |
| /*******************************************************************/ |
| |
| static int smssdio_sendrequest(void *context, void *buffer, size_t size) |
| { |
| int ret = 0; |
| struct smssdio_device *smsdev; |
| |
| smsdev = context; |
| |
| sdio_claim_host(smsdev->func); |
| |
| smsendian_handle_tx_message((struct sms_msg_data *) buffer); |
| while (size >= smsdev->func->cur_blksize) { |
| ret = sdio_memcpy_toio(smsdev->func, SMSSDIO_DATA, |
| buffer, smsdev->func->cur_blksize); |
| if (ret) |
| goto out; |
| |
| buffer += smsdev->func->cur_blksize; |
| size -= smsdev->func->cur_blksize; |
| } |
| |
| if (size) { |
| ret = sdio_memcpy_toio(smsdev->func, SMSSDIO_DATA, |
| buffer, size); |
| } |
| |
| out: |
| sdio_release_host(smsdev->func); |
| |
| return ret; |
| } |
| |
| /*******************************************************************/ |
| /* SDIO callbacks */ |
| /*******************************************************************/ |
| |
| static void smssdio_interrupt(struct sdio_func *func) |
| { |
| int ret; |
| |
| struct smssdio_device *smsdev; |
| struct smscore_buffer_t *cb; |
| struct sms_msg_hdr *hdr; |
| size_t size; |
| |
| smsdev = sdio_get_drvdata(func); |
| |
| /* |
| * The interrupt register has no defined meaning. It is just |
| * a way of turning of the level triggered interrupt. |
| */ |
| (void)sdio_readb(func, SMSSDIO_INT, &ret); |
| if (ret) { |
| pr_err("Unable to read interrupt register!\n"); |
| return; |
| } |
| |
| if (smsdev->split_cb == NULL) { |
| cb = smscore_getbuffer(smsdev->coredev); |
| if (!cb) { |
| pr_err("Unable to allocate data buffer!\n"); |
| return; |
| } |
| |
| ret = sdio_memcpy_fromio(smsdev->func, |
| cb->p, |
| SMSSDIO_DATA, |
| SMSSDIO_BLOCK_SIZE); |
| if (ret) { |
| pr_err("Error %d reading initial block!\n", ret); |
| return; |
| } |
| |
| hdr = cb->p; |
| |
| if (hdr->msg_flags & MSG_HDR_FLAG_SPLIT_MSG) { |
| smsdev->split_cb = cb; |
| return; |
| } |
| |
| if (hdr->msg_length > smsdev->func->cur_blksize) |
| size = hdr->msg_length - smsdev->func->cur_blksize; |
| else |
| size = 0; |
| } else { |
| cb = smsdev->split_cb; |
| hdr = cb->p; |
| |
| size = hdr->msg_length - sizeof(struct sms_msg_hdr); |
| |
| smsdev->split_cb = NULL; |
| } |
| |
| if (size) { |
| void *buffer; |
| |
| buffer = cb->p + (hdr->msg_length - size); |
| size = ALIGN(size, SMSSDIO_BLOCK_SIZE); |
| |
| BUG_ON(smsdev->func->cur_blksize != SMSSDIO_BLOCK_SIZE); |
| |
| /* |
| * First attempt to transfer all of it in one go... |
| */ |
| ret = sdio_memcpy_fromio(smsdev->func, |
| buffer, |
| SMSSDIO_DATA, |
| size); |
| if (ret && ret != -EINVAL) { |
| smscore_putbuffer(smsdev->coredev, cb); |
| pr_err("Error %d reading data from card!\n", ret); |
| return; |
| } |
| |
| /* |
| * ..then fall back to one block at a time if that is |
| * not possible... |
| * |
| * (we have to do this manually because of the |
| * problem with the "increase address" bit) |
| */ |
| if (ret == -EINVAL) { |
| while (size) { |
| ret = sdio_memcpy_fromio(smsdev->func, |
| buffer, SMSSDIO_DATA, |
| smsdev->func->cur_blksize); |
| if (ret) { |
| smscore_putbuffer(smsdev->coredev, cb); |
| pr_err("Error %d reading data from card!\n", |
| ret); |
| return; |
| } |
| |
| buffer += smsdev->func->cur_blksize; |
| if (size > smsdev->func->cur_blksize) |
| size -= smsdev->func->cur_blksize; |
| else |
| size = 0; |
| } |
| } |
| } |
| |
| cb->size = hdr->msg_length; |
| cb->offset = 0; |
| |
| smsendian_handle_rx_message((struct sms_msg_data *) cb->p); |
| smscore_onresponse(smsdev->coredev, cb); |
| } |
| |
| static int smssdio_probe(struct sdio_func *func, |
| const struct sdio_device_id *id) |
| { |
| int ret; |
| |
| int board_id; |
| struct smssdio_device *smsdev; |
| struct smsdevice_params_t params; |
| |
| board_id = id->driver_data; |
| |
| smsdev = kzalloc(sizeof(struct smssdio_device), GFP_KERNEL); |
| if (!smsdev) |
| return -ENOMEM; |
| |
| smsdev->func = func; |
| |
| memset(¶ms, 0, sizeof(struct smsdevice_params_t)); |
| |
| params.device = &func->dev; |
| params.buffer_size = 0x5000; /* ?? */ |
| params.num_buffers = 22; /* ?? */ |
| params.context = smsdev; |
| |
| snprintf(params.devpath, sizeof(params.devpath), |
| "sdio\\%s", sdio_func_id(func)); |
| |
| params.sendrequest_handler = smssdio_sendrequest; |
| |
| params.device_type = sms_get_board(board_id)->type; |
| |
| if (params.device_type != SMS_STELLAR) |
| params.flags |= SMS_DEVICE_FAMILY2; |
| else { |
| /* |
| * FIXME: Stellar needs special handling... |
| */ |
| ret = -ENODEV; |
| goto free; |
| } |
| |
| ret = smscore_register_device(¶ms, &smsdev->coredev, GFP_DMA, NULL); |
| if (ret < 0) |
| goto free; |
| |
| smscore_set_board_id(smsdev->coredev, board_id); |
| |
| sdio_claim_host(func); |
| |
| ret = sdio_enable_func(func); |
| if (ret) |
| goto release; |
| |
| ret = sdio_set_block_size(func, SMSSDIO_BLOCK_SIZE); |
| if (ret) |
| goto disable; |
| |
| ret = sdio_claim_irq(func, smssdio_interrupt); |
| if (ret) |
| goto disable; |
| |
| sdio_set_drvdata(func, smsdev); |
| |
| sdio_release_host(func); |
| |
| ret = smscore_start_device(smsdev->coredev); |
| if (ret < 0) |
| goto reclaim; |
| |
| return 0; |
| |
| reclaim: |
| sdio_claim_host(func); |
| sdio_release_irq(func); |
| disable: |
| sdio_disable_func(func); |
| release: |
| sdio_release_host(func); |
| smscore_unregister_device(smsdev->coredev); |
| free: |
| kfree(smsdev); |
| |
| return ret; |
| } |
| |
| static void smssdio_remove(struct sdio_func *func) |
| { |
| struct smssdio_device *smsdev; |
| |
| smsdev = sdio_get_drvdata(func); |
| |
| /* FIXME: racy! */ |
| if (smsdev->split_cb) |
| smscore_putbuffer(smsdev->coredev, smsdev->split_cb); |
| |
| smscore_unregister_device(smsdev->coredev); |
| |
| sdio_claim_host(func); |
| sdio_release_irq(func); |
| sdio_disable_func(func); |
| sdio_release_host(func); |
| |
| kfree(smsdev); |
| } |
| |
| static struct sdio_driver smssdio_driver = { |
| .name = "smssdio", |
| .id_table = smssdio_ids, |
| .probe = smssdio_probe, |
| .remove = smssdio_remove, |
| }; |
| module_sdio_driver(smssdio_driver); |
| |
| MODULE_DESCRIPTION("Siano SMS1xxx SDIO driver"); |
| MODULE_AUTHOR("Pierre Ossman"); |
| MODULE_LICENSE("GPL"); |