| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * camss-vfe.c |
| * |
| * Qualcomm MSM Camera Subsystem - VFE (Video Front End) Module |
| * |
| * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved. |
| * Copyright (C) 2015-2018 Linaro Ltd. |
| */ |
| #include <linux/clk.h> |
| #include <linux/completion.h> |
| #include <linux/interrupt.h> |
| #include <linux/iommu.h> |
| #include <linux/mutex.h> |
| #include <linux/of.h> |
| #include <linux/platform_device.h> |
| #include <linux/pm_domain.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/spinlock_types.h> |
| #include <linux/spinlock.h> |
| #include <media/media-entity.h> |
| #include <media/v4l2-device.h> |
| #include <media/v4l2-subdev.h> |
| |
| #include "camss-vfe.h" |
| #include "camss.h" |
| |
| #define MSM_VFE_NAME "msm_vfe" |
| |
| /* VFE reset timeout */ |
| #define VFE_RESET_TIMEOUT_MS 50 |
| |
| #define SCALER_RATIO_MAX 16 |
| |
| static const struct camss_format_info formats_rdi_8x16[] = { |
| { MEDIA_BUS_FMT_UYVY8_1X16, 8, V4L2_PIX_FMT_UYVY, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 1, 16) }, |
| { MEDIA_BUS_FMT_VYUY8_1X16, 8, V4L2_PIX_FMT_VYUY, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 1, 16) }, |
| { MEDIA_BUS_FMT_YUYV8_1X16, 8, V4L2_PIX_FMT_YUYV, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 1, 16) }, |
| { MEDIA_BUS_FMT_YVYU8_1X16, 8, V4L2_PIX_FMT_YVYU, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 1, 16) }, |
| { MEDIA_BUS_FMT_SBGGR8_1X8, 8, V4L2_PIX_FMT_SBGGR8, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 1, 8) }, |
| { MEDIA_BUS_FMT_SGBRG8_1X8, 8, V4L2_PIX_FMT_SGBRG8, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 1, 8) }, |
| { MEDIA_BUS_FMT_SGRBG8_1X8, 8, V4L2_PIX_FMT_SGRBG8, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 1, 8) }, |
| { MEDIA_BUS_FMT_SRGGB8_1X8, 8, V4L2_PIX_FMT_SRGGB8, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 1, 8) }, |
| { MEDIA_BUS_FMT_SBGGR10_1X10, 10, V4L2_PIX_FMT_SBGGR10P, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 1, 10) }, |
| { MEDIA_BUS_FMT_SGBRG10_1X10, 10, V4L2_PIX_FMT_SGBRG10P, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 1, 10) }, |
| { MEDIA_BUS_FMT_SGRBG10_1X10, 10, V4L2_PIX_FMT_SGRBG10P, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 1, 10) }, |
| { MEDIA_BUS_FMT_SRGGB10_1X10, 10, V4L2_PIX_FMT_SRGGB10P, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 1, 10) }, |
| { MEDIA_BUS_FMT_SBGGR12_1X12, 12, V4L2_PIX_FMT_SBGGR12P, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 1, 12) }, |
| { MEDIA_BUS_FMT_SGBRG12_1X12, 12, V4L2_PIX_FMT_SGBRG12P, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 1, 12) }, |
| { MEDIA_BUS_FMT_SGRBG12_1X12, 12, V4L2_PIX_FMT_SGRBG12P, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 1, 12) }, |
| { MEDIA_BUS_FMT_SRGGB12_1X12, 12, V4L2_PIX_FMT_SRGGB12P, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 1, 12) }, |
| { MEDIA_BUS_FMT_Y10_1X10, 10, V4L2_PIX_FMT_Y10P, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 1, 10) }, |
| }; |
| |
| static const struct camss_format_info formats_rdi_8x96[] = { |
| { MEDIA_BUS_FMT_UYVY8_1X16, 8, V4L2_PIX_FMT_UYVY, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 1, 16) }, |
| { MEDIA_BUS_FMT_VYUY8_1X16, 8, V4L2_PIX_FMT_VYUY, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 1, 16) }, |
| { MEDIA_BUS_FMT_YUYV8_1X16, 8, V4L2_PIX_FMT_YUYV, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 1, 16) }, |
| { MEDIA_BUS_FMT_YVYU8_1X16, 8, V4L2_PIX_FMT_YVYU, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 1, 16) }, |
| { MEDIA_BUS_FMT_SBGGR8_1X8, 8, V4L2_PIX_FMT_SBGGR8, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 1, 8) }, |
| { MEDIA_BUS_FMT_SGBRG8_1X8, 8, V4L2_PIX_FMT_SGBRG8, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 1, 8) }, |
| { MEDIA_BUS_FMT_SGRBG8_1X8, 8, V4L2_PIX_FMT_SGRBG8, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 1, 8) }, |
| { MEDIA_BUS_FMT_SRGGB8_1X8, 8, V4L2_PIX_FMT_SRGGB8, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 1, 8) }, |
| { MEDIA_BUS_FMT_SBGGR10_1X10, 10, V4L2_PIX_FMT_SBGGR10P, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 1, 10) }, |
| { MEDIA_BUS_FMT_SGBRG10_1X10, 10, V4L2_PIX_FMT_SGBRG10P, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 1, 10) }, |
| { MEDIA_BUS_FMT_SGRBG10_1X10, 10, V4L2_PIX_FMT_SGRBG10P, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 1, 10) }, |
| { MEDIA_BUS_FMT_SRGGB10_1X10, 10, V4L2_PIX_FMT_SRGGB10P, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 1, 10) }, |
| { MEDIA_BUS_FMT_SBGGR10_2X8_PADHI_LE, 16, V4L2_PIX_FMT_SBGGR10, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 1, 16) }, |
| { MEDIA_BUS_FMT_SBGGR12_1X12, 12, V4L2_PIX_FMT_SBGGR12P, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 1, 12) }, |
| { MEDIA_BUS_FMT_SGBRG12_1X12, 12, V4L2_PIX_FMT_SGBRG12P, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 1, 12) }, |
| { MEDIA_BUS_FMT_SGRBG12_1X12, 12, V4L2_PIX_FMT_SGRBG12P, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 1, 12) }, |
| { MEDIA_BUS_FMT_SRGGB12_1X12, 12, V4L2_PIX_FMT_SRGGB12P, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 1, 12) }, |
| { MEDIA_BUS_FMT_SBGGR14_1X14, 14, V4L2_PIX_FMT_SBGGR14P, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 1, 14) }, |
| { MEDIA_BUS_FMT_SGBRG14_1X14, 14, V4L2_PIX_FMT_SGBRG14P, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 1, 14) }, |
| { MEDIA_BUS_FMT_SGRBG14_1X14, 14, V4L2_PIX_FMT_SGRBG14P, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 1, 14) }, |
| { MEDIA_BUS_FMT_SRGGB14_1X14, 14, V4L2_PIX_FMT_SRGGB14P, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 1, 14) }, |
| { MEDIA_BUS_FMT_Y10_1X10, 10, V4L2_PIX_FMT_Y10P, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 1, 10) }, |
| { MEDIA_BUS_FMT_Y10_2X8_PADHI_LE, 16, V4L2_PIX_FMT_Y10, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 1, 16) }, |
| }; |
| |
| static const struct camss_format_info formats_rdi_845[] = { |
| { MEDIA_BUS_FMT_UYVY8_1X16, 8, V4L2_PIX_FMT_UYVY, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 1, 16) }, |
| { MEDIA_BUS_FMT_VYUY8_1X16, 8, V4L2_PIX_FMT_VYUY, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 1, 16) }, |
| { MEDIA_BUS_FMT_YUYV8_1X16, 8, V4L2_PIX_FMT_YUYV, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 1, 16) }, |
| { MEDIA_BUS_FMT_YVYU8_1X16, 8, V4L2_PIX_FMT_YVYU, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 1, 16) }, |
| { MEDIA_BUS_FMT_SBGGR8_1X8, 8, V4L2_PIX_FMT_SBGGR8, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 1, 8) }, |
| { MEDIA_BUS_FMT_SGBRG8_1X8, 8, V4L2_PIX_FMT_SGBRG8, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 1, 8) }, |
| { MEDIA_BUS_FMT_SGRBG8_1X8, 8, V4L2_PIX_FMT_SGRBG8, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 1, 8) }, |
| { MEDIA_BUS_FMT_SRGGB8_1X8, 8, V4L2_PIX_FMT_SRGGB8, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 1, 8) }, |
| { MEDIA_BUS_FMT_SBGGR10_1X10, 10, V4L2_PIX_FMT_SBGGR10P, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 1, 10) }, |
| { MEDIA_BUS_FMT_SGBRG10_1X10, 10, V4L2_PIX_FMT_SGBRG10P, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 1, 10) }, |
| { MEDIA_BUS_FMT_SGRBG10_1X10, 10, V4L2_PIX_FMT_SGRBG10P, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 1, 10) }, |
| { MEDIA_BUS_FMT_SRGGB10_1X10, 10, V4L2_PIX_FMT_SRGGB10P, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 1, 10) }, |
| { MEDIA_BUS_FMT_SBGGR10_2X8_PADHI_LE, 16, V4L2_PIX_FMT_SBGGR10, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 1, 16) }, |
| { MEDIA_BUS_FMT_SBGGR12_1X12, 12, V4L2_PIX_FMT_SBGGR12P, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 1, 12) }, |
| { MEDIA_BUS_FMT_SGBRG12_1X12, 12, V4L2_PIX_FMT_SGBRG12P, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 1, 12) }, |
| { MEDIA_BUS_FMT_SGRBG12_1X12, 12, V4L2_PIX_FMT_SGRBG12P, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 1, 12) }, |
| { MEDIA_BUS_FMT_SRGGB12_1X12, 12, V4L2_PIX_FMT_SRGGB12P, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 1, 12) }, |
| { MEDIA_BUS_FMT_SBGGR14_1X14, 14, V4L2_PIX_FMT_SBGGR14P, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 1, 14) }, |
| { MEDIA_BUS_FMT_SGBRG14_1X14, 14, V4L2_PIX_FMT_SGBRG14P, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 1, 14) }, |
| { MEDIA_BUS_FMT_SGRBG14_1X14, 14, V4L2_PIX_FMT_SGRBG14P, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 1, 14) }, |
| { MEDIA_BUS_FMT_SRGGB14_1X14, 14, V4L2_PIX_FMT_SRGGB14P, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 1, 14) }, |
| { MEDIA_BUS_FMT_Y8_1X8, 8, V4L2_PIX_FMT_GREY, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 1, 8) }, |
| { MEDIA_BUS_FMT_Y10_1X10, 10, V4L2_PIX_FMT_Y10P, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 1, 10) }, |
| { MEDIA_BUS_FMT_Y10_2X8_PADHI_LE, 16, V4L2_PIX_FMT_Y10, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 1, 16) }, |
| }; |
| |
| static const struct camss_format_info formats_pix_8x16[] = { |
| { MEDIA_BUS_FMT_YUYV8_1_5X8, 8, V4L2_PIX_FMT_NV12, 1, |
| PER_PLANE_DATA(0, 1, 1, 2, 3, 8) }, |
| { MEDIA_BUS_FMT_YVYU8_1_5X8, 8, V4L2_PIX_FMT_NV12, 1, |
| PER_PLANE_DATA(0, 1, 1, 2, 3, 8) }, |
| { MEDIA_BUS_FMT_UYVY8_1_5X8, 8, V4L2_PIX_FMT_NV12, 1, |
| PER_PLANE_DATA(0, 1, 1, 2, 3, 8) }, |
| { MEDIA_BUS_FMT_VYUY8_1_5X8, 8, V4L2_PIX_FMT_NV12, 1, |
| PER_PLANE_DATA(0, 1, 1, 2, 3, 8) }, |
| { MEDIA_BUS_FMT_YUYV8_1_5X8, 8, V4L2_PIX_FMT_NV21, 1, |
| PER_PLANE_DATA(0, 1, 1, 2, 3, 8) }, |
| { MEDIA_BUS_FMT_YVYU8_1_5X8, 8, V4L2_PIX_FMT_NV21, 1, |
| PER_PLANE_DATA(0, 1, 1, 2, 3, 8) }, |
| { MEDIA_BUS_FMT_UYVY8_1_5X8, 8, V4L2_PIX_FMT_NV21, 1, |
| PER_PLANE_DATA(0, 1, 1, 2, 3, 8) }, |
| { MEDIA_BUS_FMT_VYUY8_1_5X8, 8, V4L2_PIX_FMT_NV21, 1, |
| PER_PLANE_DATA(0, 1, 1, 2, 3, 8) }, |
| { MEDIA_BUS_FMT_YUYV8_1X16, 8, V4L2_PIX_FMT_NV16, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 2, 8) }, |
| { MEDIA_BUS_FMT_YVYU8_1X16, 8, V4L2_PIX_FMT_NV16, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 2, 8) }, |
| { MEDIA_BUS_FMT_UYVY8_1X16, 8, V4L2_PIX_FMT_NV16, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 2, 8) }, |
| { MEDIA_BUS_FMT_VYUY8_1X16, 8, V4L2_PIX_FMT_NV16, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 2, 8) }, |
| { MEDIA_BUS_FMT_YUYV8_1X16, 8, V4L2_PIX_FMT_NV61, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 2, 8) }, |
| { MEDIA_BUS_FMT_YVYU8_1X16, 8, V4L2_PIX_FMT_NV61, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 2, 8) }, |
| { MEDIA_BUS_FMT_UYVY8_1X16, 8, V4L2_PIX_FMT_NV61, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 2, 8) }, |
| { MEDIA_BUS_FMT_VYUY8_1X16, 8, V4L2_PIX_FMT_NV61, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 2, 8) }, |
| }; |
| |
| static const struct camss_format_info formats_pix_8x96[] = { |
| { MEDIA_BUS_FMT_YUYV8_1_5X8, 8, V4L2_PIX_FMT_NV12, 1, |
| PER_PLANE_DATA(0, 1, 1, 2, 3, 8) }, |
| { MEDIA_BUS_FMT_YVYU8_1_5X8, 8, V4L2_PIX_FMT_NV12, 1, |
| PER_PLANE_DATA(0, 1, 1, 2, 3, 8) }, |
| { MEDIA_BUS_FMT_UYVY8_1_5X8, 8, V4L2_PIX_FMT_NV12, 1, |
| PER_PLANE_DATA(0, 1, 1, 2, 3, 8) }, |
| { MEDIA_BUS_FMT_VYUY8_1_5X8, 8, V4L2_PIX_FMT_NV12, 1, |
| PER_PLANE_DATA(0, 1, 1, 2, 3, 8) }, |
| { MEDIA_BUS_FMT_YUYV8_1_5X8, 8, V4L2_PIX_FMT_NV21, 1, |
| PER_PLANE_DATA(0, 1, 1, 2, 3, 8) }, |
| { MEDIA_BUS_FMT_YVYU8_1_5X8, 8, V4L2_PIX_FMT_NV21, 1, |
| PER_PLANE_DATA(0, 1, 1, 2, 3, 8) }, |
| { MEDIA_BUS_FMT_UYVY8_1_5X8, 8, V4L2_PIX_FMT_NV21, 1, |
| PER_PLANE_DATA(0, 1, 1, 2, 3, 8) }, |
| { MEDIA_BUS_FMT_VYUY8_1_5X8, 8, V4L2_PIX_FMT_NV21, 1, |
| PER_PLANE_DATA(0, 1, 1, 2, 3, 8) }, |
| { MEDIA_BUS_FMT_YUYV8_1X16, 8, V4L2_PIX_FMT_NV16, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 2, 8) }, |
| { MEDIA_BUS_FMT_YVYU8_1X16, 8, V4L2_PIX_FMT_NV16, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 2, 8) }, |
| { MEDIA_BUS_FMT_UYVY8_1X16, 8, V4L2_PIX_FMT_NV16, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 2, 8) }, |
| { MEDIA_BUS_FMT_VYUY8_1X16, 8, V4L2_PIX_FMT_NV16, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 2, 8) }, |
| { MEDIA_BUS_FMT_YUYV8_1X16, 8, V4L2_PIX_FMT_NV61, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 2, 8) }, |
| { MEDIA_BUS_FMT_YVYU8_1X16, 8, V4L2_PIX_FMT_NV61, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 2, 8) }, |
| { MEDIA_BUS_FMT_UYVY8_1X16, 8, V4L2_PIX_FMT_NV61, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 2, 8) }, |
| { MEDIA_BUS_FMT_VYUY8_1X16, 8, V4L2_PIX_FMT_NV61, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 2, 8) }, |
| { MEDIA_BUS_FMT_UYVY8_1X16, 8, V4L2_PIX_FMT_UYVY, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 1, 16) }, |
| { MEDIA_BUS_FMT_VYUY8_1X16, 8, V4L2_PIX_FMT_VYUY, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 1, 16) }, |
| { MEDIA_BUS_FMT_YUYV8_1X16, 8, V4L2_PIX_FMT_YUYV, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 1, 16) }, |
| { MEDIA_BUS_FMT_YVYU8_1X16, 8, V4L2_PIX_FMT_YVYU, 1, |
| PER_PLANE_DATA(0, 1, 1, 1, 1, 16) }, |
| }; |
| |
| const struct camss_formats vfe_formats_rdi_8x16 = { |
| .nformats = ARRAY_SIZE(formats_rdi_8x16), |
| .formats = formats_rdi_8x16 |
| }; |
| |
| const struct camss_formats vfe_formats_pix_8x16 = { |
| .nformats = ARRAY_SIZE(formats_pix_8x16), |
| .formats = formats_pix_8x16 |
| }; |
| |
| const struct camss_formats vfe_formats_rdi_8x96 = { |
| .nformats = ARRAY_SIZE(formats_rdi_8x96), |
| .formats = formats_rdi_8x96 |
| }; |
| |
| const struct camss_formats vfe_formats_pix_8x96 = { |
| .nformats = ARRAY_SIZE(formats_pix_8x96), |
| .formats = formats_pix_8x96 |
| }; |
| |
| const struct camss_formats vfe_formats_rdi_845 = { |
| .nformats = ARRAY_SIZE(formats_rdi_845), |
| .formats = formats_rdi_845 |
| }; |
| |
| /* TODO: Replace with pix formats */ |
| const struct camss_formats vfe_formats_pix_845 = { |
| .nformats = ARRAY_SIZE(formats_rdi_845), |
| .formats = formats_rdi_845 |
| }; |
| |
| static u32 vfe_src_pad_code(struct vfe_line *line, u32 sink_code, |
| unsigned int index, u32 src_req_code) |
| { |
| struct vfe_device *vfe = to_vfe(line); |
| |
| switch (vfe->camss->res->version) { |
| case CAMSS_8x16: |
| switch (sink_code) { |
| case MEDIA_BUS_FMT_YUYV8_1X16: |
| { |
| u32 src_code[] = { |
| MEDIA_BUS_FMT_YUYV8_1X16, |
| MEDIA_BUS_FMT_YUYV8_1_5X8, |
| }; |
| |
| return camss_format_find_code(src_code, ARRAY_SIZE(src_code), |
| index, src_req_code); |
| } |
| case MEDIA_BUS_FMT_YVYU8_1X16: |
| { |
| u32 src_code[] = { |
| MEDIA_BUS_FMT_YVYU8_1X16, |
| MEDIA_BUS_FMT_YVYU8_1_5X8, |
| }; |
| |
| return camss_format_find_code(src_code, ARRAY_SIZE(src_code), |
| index, src_req_code); |
| } |
| case MEDIA_BUS_FMT_UYVY8_1X16: |
| { |
| u32 src_code[] = { |
| MEDIA_BUS_FMT_UYVY8_1X16, |
| MEDIA_BUS_FMT_UYVY8_1_5X8, |
| }; |
| |
| return camss_format_find_code(src_code, ARRAY_SIZE(src_code), |
| index, src_req_code); |
| } |
| case MEDIA_BUS_FMT_VYUY8_1X16: |
| { |
| u32 src_code[] = { |
| MEDIA_BUS_FMT_VYUY8_1X16, |
| MEDIA_BUS_FMT_VYUY8_1_5X8, |
| }; |
| |
| return camss_format_find_code(src_code, ARRAY_SIZE(src_code), |
| index, src_req_code); |
| } |
| default: |
| if (index > 0) |
| return 0; |
| |
| return sink_code; |
| } |
| break; |
| case CAMSS_8x96: |
| case CAMSS_660: |
| case CAMSS_845: |
| case CAMSS_8250: |
| case CAMSS_8280XP: |
| switch (sink_code) { |
| case MEDIA_BUS_FMT_YUYV8_1X16: |
| { |
| u32 src_code[] = { |
| MEDIA_BUS_FMT_YUYV8_1X16, |
| MEDIA_BUS_FMT_YVYU8_1X16, |
| MEDIA_BUS_FMT_UYVY8_1X16, |
| MEDIA_BUS_FMT_VYUY8_1X16, |
| MEDIA_BUS_FMT_YUYV8_1_5X8, |
| }; |
| |
| return camss_format_find_code(src_code, ARRAY_SIZE(src_code), |
| index, src_req_code); |
| } |
| case MEDIA_BUS_FMT_YVYU8_1X16: |
| { |
| u32 src_code[] = { |
| MEDIA_BUS_FMT_YVYU8_1X16, |
| MEDIA_BUS_FMT_YUYV8_1X16, |
| MEDIA_BUS_FMT_UYVY8_1X16, |
| MEDIA_BUS_FMT_VYUY8_1X16, |
| MEDIA_BUS_FMT_YVYU8_1_5X8, |
| }; |
| |
| return camss_format_find_code(src_code, ARRAY_SIZE(src_code), |
| index, src_req_code); |
| } |
| case MEDIA_BUS_FMT_UYVY8_1X16: |
| { |
| u32 src_code[] = { |
| MEDIA_BUS_FMT_UYVY8_1X16, |
| MEDIA_BUS_FMT_YUYV8_1X16, |
| MEDIA_BUS_FMT_YVYU8_1X16, |
| MEDIA_BUS_FMT_VYUY8_1X16, |
| MEDIA_BUS_FMT_UYVY8_1_5X8, |
| }; |
| |
| return camss_format_find_code(src_code, ARRAY_SIZE(src_code), |
| index, src_req_code); |
| } |
| case MEDIA_BUS_FMT_VYUY8_1X16: |
| { |
| u32 src_code[] = { |
| MEDIA_BUS_FMT_VYUY8_1X16, |
| MEDIA_BUS_FMT_YUYV8_1X16, |
| MEDIA_BUS_FMT_YVYU8_1X16, |
| MEDIA_BUS_FMT_UYVY8_1X16, |
| MEDIA_BUS_FMT_VYUY8_1_5X8, |
| }; |
| |
| return camss_format_find_code(src_code, ARRAY_SIZE(src_code), |
| index, src_req_code); |
| } |
| default: |
| if (index > 0) |
| return 0; |
| |
| return sink_code; |
| } |
| break; |
| } |
| return 0; |
| } |
| |
| int vfe_reset(struct vfe_device *vfe) |
| { |
| unsigned long time; |
| |
| reinit_completion(&vfe->reset_complete); |
| |
| vfe->res->hw_ops->global_reset(vfe); |
| |
| time = wait_for_completion_timeout(&vfe->reset_complete, |
| msecs_to_jiffies(VFE_RESET_TIMEOUT_MS)); |
| if (!time) { |
| dev_err(vfe->camss->dev, "VFE reset timeout\n"); |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| static void vfe_init_outputs(struct vfe_device *vfe) |
| { |
| int i; |
| |
| for (i = 0; i < vfe->res->line_num; i++) { |
| struct vfe_output *output = &vfe->line[i].output; |
| |
| output->state = VFE_OUTPUT_OFF; |
| output->buf[0] = NULL; |
| output->buf[1] = NULL; |
| INIT_LIST_HEAD(&output->pending_bufs); |
| } |
| } |
| |
| static void vfe_reset_output_maps(struct vfe_device *vfe) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(vfe->wm_output_map); i++) |
| vfe->wm_output_map[i] = VFE_LINE_NONE; |
| } |
| |
| int vfe_reserve_wm(struct vfe_device *vfe, enum vfe_line_id line_id) |
| { |
| int ret = -EBUSY; |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(vfe->wm_output_map); i++) { |
| if (vfe->wm_output_map[i] == VFE_LINE_NONE) { |
| vfe->wm_output_map[i] = line_id; |
| ret = i; |
| break; |
| } |
| } |
| |
| return ret; |
| } |
| |
| int vfe_release_wm(struct vfe_device *vfe, u8 wm) |
| { |
| if (wm >= ARRAY_SIZE(vfe->wm_output_map)) |
| return -EINVAL; |
| |
| vfe->wm_output_map[wm] = VFE_LINE_NONE; |
| |
| return 0; |
| } |
| |
| struct camss_buffer *vfe_buf_get_pending(struct vfe_output *output) |
| { |
| struct camss_buffer *buffer = NULL; |
| |
| if (!list_empty(&output->pending_bufs)) { |
| buffer = list_first_entry(&output->pending_bufs, |
| struct camss_buffer, |
| queue); |
| list_del(&buffer->queue); |
| } |
| |
| return buffer; |
| } |
| |
| void vfe_buf_add_pending(struct vfe_output *output, |
| struct camss_buffer *buffer) |
| { |
| INIT_LIST_HEAD(&buffer->queue); |
| list_add_tail(&buffer->queue, &output->pending_bufs); |
| } |
| |
| /* |
| * vfe_buf_flush_pending - Flush all pending buffers. |
| * @output: VFE output |
| * @state: vb2 buffer state |
| */ |
| static void vfe_buf_flush_pending(struct vfe_output *output, |
| enum vb2_buffer_state state) |
| { |
| struct camss_buffer *buf; |
| struct camss_buffer *t; |
| |
| list_for_each_entry_safe(buf, t, &output->pending_bufs, queue) { |
| vb2_buffer_done(&buf->vb.vb2_buf, state); |
| list_del(&buf->queue); |
| } |
| } |
| |
| int vfe_put_output(struct vfe_line *line) |
| { |
| struct vfe_device *vfe = to_vfe(line); |
| struct vfe_output *output = &line->output; |
| unsigned long flags; |
| unsigned int i; |
| |
| spin_lock_irqsave(&vfe->output_lock, flags); |
| |
| for (i = 0; i < output->wm_num; i++) |
| vfe_release_wm(vfe, output->wm_idx[i]); |
| |
| output->state = VFE_OUTPUT_OFF; |
| |
| spin_unlock_irqrestore(&vfe->output_lock, flags); |
| return 0; |
| } |
| |
| static int vfe_disable_output(struct vfe_line *line) |
| { |
| struct vfe_device *vfe = to_vfe(line); |
| struct vfe_output *output = &line->output; |
| unsigned long flags; |
| unsigned int i; |
| |
| spin_lock_irqsave(&vfe->output_lock, flags); |
| for (i = 0; i < output->wm_num; i++) |
| vfe->res->hw_ops->vfe_wm_stop(vfe, output->wm_idx[i]); |
| output->gen2.active_num = 0; |
| spin_unlock_irqrestore(&vfe->output_lock, flags); |
| |
| return vfe_reset(vfe); |
| } |
| |
| /* |
| * vfe_disable - Disable streaming on VFE line |
| * @line: VFE line |
| * |
| * Return 0 on success or a negative error code otherwise |
| */ |
| int vfe_disable(struct vfe_line *line) |
| { |
| struct vfe_device *vfe = to_vfe(line); |
| int ret; |
| |
| ret = vfe_disable_output(line); |
| if (ret) |
| goto error; |
| |
| vfe_put_output(line); |
| |
| mutex_lock(&vfe->stream_lock); |
| |
| vfe->stream_count--; |
| |
| mutex_unlock(&vfe->stream_lock); |
| |
| error: |
| return ret; |
| } |
| |
| /** |
| * vfe_isr_comp_done() - Process composite image done interrupt |
| * @vfe: VFE Device |
| * @comp: Composite image id |
| */ |
| void vfe_isr_comp_done(struct vfe_device *vfe, u8 comp) |
| { |
| unsigned int i; |
| |
| for (i = 0; i < ARRAY_SIZE(vfe->wm_output_map); i++) |
| if (vfe->wm_output_map[i] == VFE_LINE_PIX) { |
| vfe->isr_ops.wm_done(vfe, i); |
| break; |
| } |
| } |
| |
| void vfe_isr_reset_ack(struct vfe_device *vfe) |
| { |
| complete(&vfe->reset_complete); |
| } |
| |
| /* |
| * vfe_pm_domain_off - Disable power domains specific to this VFE. |
| * @vfe: VFE Device |
| */ |
| void vfe_pm_domain_off(struct vfe_device *vfe) |
| { |
| if (!vfe->genpd) |
| return; |
| |
| device_link_del(vfe->genpd_link); |
| vfe->genpd_link = NULL; |
| } |
| |
| /* |
| * vfe_pm_domain_on - Enable power domains specific to this VFE. |
| * @vfe: VFE Device |
| */ |
| int vfe_pm_domain_on(struct vfe_device *vfe) |
| { |
| struct camss *camss = vfe->camss; |
| |
| if (!vfe->genpd) |
| return 0; |
| |
| vfe->genpd_link = device_link_add(camss->dev, vfe->genpd, |
| DL_FLAG_STATELESS | |
| DL_FLAG_PM_RUNTIME | |
| DL_FLAG_RPM_ACTIVE); |
| if (!vfe->genpd_link) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| static int vfe_match_clock_names(struct vfe_device *vfe, |
| struct camss_clock *clock) |
| { |
| char vfe_name[7]; /* vfeXXX\0 */ |
| char vfe_lite_name[12]; /* vfe_liteXXX\0 */ |
| |
| snprintf(vfe_name, sizeof(vfe_name), "vfe%d", vfe->id); |
| snprintf(vfe_lite_name, sizeof(vfe_lite_name), "vfe_lite%d", vfe->id); |
| |
| return (!strcmp(clock->name, vfe_name) || |
| !strcmp(clock->name, vfe_lite_name) || |
| !strcmp(clock->name, "vfe_lite")); |
| } |
| |
| /* |
| * vfe_set_clock_rates - Calculate and set clock rates on VFE module |
| * @vfe: VFE device |
| * |
| * Return 0 on success or a negative error code otherwise |
| */ |
| static int vfe_set_clock_rates(struct vfe_device *vfe) |
| { |
| struct device *dev = vfe->camss->dev; |
| u64 pixel_clock[VFE_LINE_NUM_MAX]; |
| int i, j; |
| int ret; |
| |
| for (i = VFE_LINE_RDI0; i < vfe->res->line_num; i++) { |
| ret = camss_get_pixel_clock(&vfe->line[i].subdev.entity, |
| &pixel_clock[i]); |
| if (ret) |
| pixel_clock[i] = 0; |
| } |
| |
| for (i = 0; i < vfe->nclocks; i++) { |
| struct camss_clock *clock = &vfe->clock[i]; |
| |
| if (vfe_match_clock_names(vfe, clock)) { |
| u64 min_rate = 0; |
| long rate; |
| |
| for (j = VFE_LINE_RDI0; j < vfe->res->line_num; j++) { |
| u32 tmp; |
| u8 bpp; |
| |
| if (j == VFE_LINE_PIX) { |
| tmp = pixel_clock[j]; |
| } else { |
| struct vfe_line *l = &vfe->line[j]; |
| |
| bpp = camss_format_get_bpp(l->formats, |
| l->nformats, |
| l->fmt[MSM_VFE_PAD_SINK].code); |
| tmp = pixel_clock[j] * bpp / 64; |
| } |
| |
| if (min_rate < tmp) |
| min_rate = tmp; |
| } |
| |
| camss_add_clock_margin(&min_rate); |
| |
| for (j = 0; j < clock->nfreqs; j++) |
| if (min_rate < clock->freq[j]) |
| break; |
| |
| if (j == clock->nfreqs) { |
| dev_err(dev, |
| "Pixel clock is too high for VFE"); |
| return -EINVAL; |
| } |
| |
| /* if sensor pixel clock is not available */ |
| /* set highest possible VFE clock rate */ |
| if (min_rate == 0) |
| j = clock->nfreqs - 1; |
| |
| rate = clk_round_rate(clock->clk, clock->freq[j]); |
| if (rate < 0) { |
| dev_err(dev, "clk round rate failed: %ld\n", |
| rate); |
| return -EINVAL; |
| } |
| |
| ret = clk_set_rate(clock->clk, rate); |
| if (ret < 0) { |
| dev_err(dev, "clk set rate failed: %d\n", ret); |
| return ret; |
| } |
| } |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * vfe_check_clock_rates - Check current clock rates on VFE module |
| * @vfe: VFE device |
| * |
| * Return 0 if current clock rates are suitable for a new pipeline |
| * or a negative error code otherwise |
| */ |
| static int vfe_check_clock_rates(struct vfe_device *vfe) |
| { |
| u64 pixel_clock[VFE_LINE_NUM_MAX]; |
| int i, j; |
| int ret; |
| |
| for (i = VFE_LINE_RDI0; i < vfe->res->line_num; i++) { |
| ret = camss_get_pixel_clock(&vfe->line[i].subdev.entity, |
| &pixel_clock[i]); |
| if (ret) |
| pixel_clock[i] = 0; |
| } |
| |
| for (i = 0; i < vfe->nclocks; i++) { |
| struct camss_clock *clock = &vfe->clock[i]; |
| |
| if (vfe_match_clock_names(vfe, clock)) { |
| u64 min_rate = 0; |
| unsigned long rate; |
| |
| for (j = VFE_LINE_RDI0; j < vfe->res->line_num; j++) { |
| u32 tmp; |
| u8 bpp; |
| |
| if (j == VFE_LINE_PIX) { |
| tmp = pixel_clock[j]; |
| } else { |
| struct vfe_line *l = &vfe->line[j]; |
| |
| bpp = camss_format_get_bpp(l->formats, |
| l->nformats, |
| l->fmt[MSM_VFE_PAD_SINK].code); |
| tmp = pixel_clock[j] * bpp / 64; |
| } |
| |
| if (min_rate < tmp) |
| min_rate = tmp; |
| } |
| |
| camss_add_clock_margin(&min_rate); |
| |
| rate = clk_get_rate(clock->clk); |
| if (rate < min_rate) |
| return -EBUSY; |
| } |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * vfe_get - Power up and reset VFE module |
| * @vfe: VFE Device |
| * |
| * Return 0 on success or a negative error code otherwise |
| */ |
| int vfe_get(struct vfe_device *vfe) |
| { |
| int ret; |
| |
| mutex_lock(&vfe->power_lock); |
| |
| if (vfe->power_count == 0) { |
| ret = vfe->res->hw_ops->pm_domain_on(vfe); |
| if (ret < 0) |
| goto error_pm_domain; |
| |
| ret = pm_runtime_resume_and_get(vfe->camss->dev); |
| if (ret < 0) |
| goto error_domain_off; |
| |
| ret = vfe_set_clock_rates(vfe); |
| if (ret < 0) |
| goto error_pm_runtime_get; |
| |
| ret = camss_enable_clocks(vfe->nclocks, vfe->clock, |
| vfe->camss->dev); |
| if (ret < 0) |
| goto error_pm_runtime_get; |
| |
| ret = vfe_reset(vfe); |
| if (ret < 0) |
| goto error_reset; |
| |
| vfe_reset_output_maps(vfe); |
| |
| vfe_init_outputs(vfe); |
| |
| vfe->res->hw_ops->hw_version(vfe); |
| } else { |
| ret = vfe_check_clock_rates(vfe); |
| if (ret < 0) |
| goto error_pm_domain; |
| } |
| vfe->power_count++; |
| |
| mutex_unlock(&vfe->power_lock); |
| |
| return 0; |
| |
| error_reset: |
| camss_disable_clocks(vfe->nclocks, vfe->clock); |
| |
| error_pm_runtime_get: |
| pm_runtime_put_sync(vfe->camss->dev); |
| error_domain_off: |
| vfe->res->hw_ops->pm_domain_off(vfe); |
| |
| error_pm_domain: |
| mutex_unlock(&vfe->power_lock); |
| |
| return ret; |
| } |
| |
| /* |
| * vfe_put - Power down VFE module |
| * @vfe: VFE Device |
| */ |
| void vfe_put(struct vfe_device *vfe) |
| { |
| mutex_lock(&vfe->power_lock); |
| |
| if (vfe->power_count == 0) { |
| dev_err(vfe->camss->dev, "vfe power off on power_count == 0\n"); |
| goto exit; |
| } else if (vfe->power_count == 1) { |
| if (vfe->was_streaming) { |
| vfe->was_streaming = 0; |
| vfe->res->hw_ops->vfe_halt(vfe); |
| } |
| camss_disable_clocks(vfe->nclocks, vfe->clock); |
| pm_runtime_put_sync(vfe->camss->dev); |
| vfe->res->hw_ops->pm_domain_off(vfe); |
| } |
| |
| vfe->power_count--; |
| |
| exit: |
| mutex_unlock(&vfe->power_lock); |
| } |
| |
| /* |
| * vfe_flush_buffers - Return all vb2 buffers |
| * @vid: Video device structure |
| * @state: vb2 buffer state of the returned buffers |
| * |
| * Return all buffers to vb2. This includes queued pending buffers (still |
| * unused) and any buffers given to the hardware but again still not used. |
| * |
| * Return 0 on success or a negative error code otherwise |
| */ |
| int vfe_flush_buffers(struct camss_video *vid, |
| enum vb2_buffer_state state) |
| { |
| struct vfe_line *line = container_of(vid, struct vfe_line, video_out); |
| struct vfe_device *vfe = to_vfe(line); |
| struct vfe_output *output; |
| unsigned long flags; |
| |
| output = &line->output; |
| |
| spin_lock_irqsave(&vfe->output_lock, flags); |
| |
| vfe_buf_flush_pending(output, state); |
| |
| if (output->buf[0]) |
| vb2_buffer_done(&output->buf[0]->vb.vb2_buf, state); |
| |
| if (output->buf[1]) |
| vb2_buffer_done(&output->buf[1]->vb.vb2_buf, state); |
| |
| if (output->last_buffer) { |
| vb2_buffer_done(&output->last_buffer->vb.vb2_buf, state); |
| output->last_buffer = NULL; |
| } |
| |
| spin_unlock_irqrestore(&vfe->output_lock, flags); |
| |
| return 0; |
| } |
| |
| /* |
| * vfe_set_power - Power on/off VFE module |
| * @sd: VFE V4L2 subdevice |
| * @on: Requested power state |
| * |
| * Return 0 on success or a negative error code otherwise |
| */ |
| static int vfe_set_power(struct v4l2_subdev *sd, int on) |
| { |
| struct vfe_line *line = v4l2_get_subdevdata(sd); |
| struct vfe_device *vfe = to_vfe(line); |
| int ret; |
| |
| if (on) { |
| ret = vfe_get(vfe); |
| if (ret < 0) |
| return ret; |
| } else { |
| vfe_put(vfe); |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * vfe_set_stream - Enable/disable streaming on VFE module |
| * @sd: VFE V4L2 subdevice |
| * @enable: Requested streaming state |
| * |
| * Main configuration of VFE module is triggered here. |
| * |
| * Return 0 on success or a negative error code otherwise |
| */ |
| static int vfe_set_stream(struct v4l2_subdev *sd, int enable) |
| { |
| struct vfe_line *line = v4l2_get_subdevdata(sd); |
| struct vfe_device *vfe = to_vfe(line); |
| int ret; |
| |
| if (enable) { |
| line->output.state = VFE_OUTPUT_RESERVED; |
| ret = vfe->res->hw_ops->vfe_enable(line); |
| if (ret < 0) |
| dev_err(vfe->camss->dev, |
| "Failed to enable vfe outputs\n"); |
| } else { |
| ret = vfe->res->hw_ops->vfe_disable(line); |
| if (ret < 0) |
| dev_err(vfe->camss->dev, |
| "Failed to disable vfe outputs\n"); |
| } |
| |
| return ret; |
| } |
| |
| /* |
| * __vfe_get_format - Get pointer to format structure |
| * @line: VFE line |
| * @sd_state: V4L2 subdev state |
| * @pad: pad from which format is requested |
| * @which: TRY or ACTIVE format |
| * |
| * Return pointer to TRY or ACTIVE format structure |
| */ |
| static struct v4l2_mbus_framefmt * |
| __vfe_get_format(struct vfe_line *line, |
| struct v4l2_subdev_state *sd_state, |
| unsigned int pad, |
| enum v4l2_subdev_format_whence which) |
| { |
| if (which == V4L2_SUBDEV_FORMAT_TRY) |
| return v4l2_subdev_state_get_format(sd_state, pad); |
| |
| return &line->fmt[pad]; |
| } |
| |
| /* |
| * __vfe_get_compose - Get pointer to compose selection structure |
| * @line: VFE line |
| * @sd_state: V4L2 subdev state |
| * @which: TRY or ACTIVE format |
| * |
| * Return pointer to TRY or ACTIVE compose rectangle structure |
| */ |
| static struct v4l2_rect * |
| __vfe_get_compose(struct vfe_line *line, |
| struct v4l2_subdev_state *sd_state, |
| enum v4l2_subdev_format_whence which) |
| { |
| if (which == V4L2_SUBDEV_FORMAT_TRY) |
| return v4l2_subdev_state_get_compose(sd_state, |
| MSM_VFE_PAD_SINK); |
| |
| return &line->compose; |
| } |
| |
| /* |
| * __vfe_get_crop - Get pointer to crop selection structure |
| * @line: VFE line |
| * @sd_state: V4L2 subdev state |
| * @which: TRY or ACTIVE format |
| * |
| * Return pointer to TRY or ACTIVE crop rectangle structure |
| */ |
| static struct v4l2_rect * |
| __vfe_get_crop(struct vfe_line *line, |
| struct v4l2_subdev_state *sd_state, |
| enum v4l2_subdev_format_whence which) |
| { |
| if (which == V4L2_SUBDEV_FORMAT_TRY) |
| return v4l2_subdev_state_get_crop(sd_state, MSM_VFE_PAD_SRC); |
| |
| return &line->crop; |
| } |
| |
| /* |
| * vfe_try_format - Handle try format by pad subdev method |
| * @line: VFE line |
| * @sd_state: V4L2 subdev state |
| * @pad: pad on which format is requested |
| * @fmt: pointer to v4l2 format structure |
| * @which: wanted subdev format |
| */ |
| static void vfe_try_format(struct vfe_line *line, |
| struct v4l2_subdev_state *sd_state, |
| unsigned int pad, |
| struct v4l2_mbus_framefmt *fmt, |
| enum v4l2_subdev_format_whence which) |
| { |
| unsigned int i; |
| u32 code; |
| |
| switch (pad) { |
| case MSM_VFE_PAD_SINK: |
| /* Set format on sink pad */ |
| |
| for (i = 0; i < line->nformats; i++) |
| if (fmt->code == line->formats[i].code) |
| break; |
| |
| /* If not found, use UYVY as default */ |
| if (i >= line->nformats) |
| fmt->code = MEDIA_BUS_FMT_UYVY8_1X16; |
| |
| fmt->width = clamp_t(u32, fmt->width, 1, 8191); |
| fmt->height = clamp_t(u32, fmt->height, 1, 8191); |
| |
| fmt->field = V4L2_FIELD_NONE; |
| fmt->colorspace = V4L2_COLORSPACE_SRGB; |
| |
| break; |
| |
| case MSM_VFE_PAD_SRC: |
| /* Set and return a format same as sink pad */ |
| code = fmt->code; |
| |
| *fmt = *__vfe_get_format(line, sd_state, MSM_VFE_PAD_SINK, |
| which); |
| |
| fmt->code = vfe_src_pad_code(line, fmt->code, 0, code); |
| |
| if (line->id == VFE_LINE_PIX) { |
| struct v4l2_rect *rect; |
| |
| rect = __vfe_get_crop(line, sd_state, which); |
| |
| fmt->width = rect->width; |
| fmt->height = rect->height; |
| } |
| |
| break; |
| } |
| |
| fmt->colorspace = V4L2_COLORSPACE_SRGB; |
| } |
| |
| /* |
| * vfe_try_compose - Handle try compose selection by pad subdev method |
| * @line: VFE line |
| * @sd_state: V4L2 subdev state |
| * @rect: pointer to v4l2 rect structure |
| * @which: wanted subdev format |
| */ |
| static void vfe_try_compose(struct vfe_line *line, |
| struct v4l2_subdev_state *sd_state, |
| struct v4l2_rect *rect, |
| enum v4l2_subdev_format_whence which) |
| { |
| struct v4l2_mbus_framefmt *fmt; |
| |
| fmt = __vfe_get_format(line, sd_state, MSM_VFE_PAD_SINK, which); |
| |
| if (rect->width > fmt->width) |
| rect->width = fmt->width; |
| |
| if (rect->height > fmt->height) |
| rect->height = fmt->height; |
| |
| if (fmt->width > rect->width * SCALER_RATIO_MAX) |
| rect->width = (fmt->width + SCALER_RATIO_MAX - 1) / |
| SCALER_RATIO_MAX; |
| |
| rect->width &= ~0x1; |
| |
| if (fmt->height > rect->height * SCALER_RATIO_MAX) |
| rect->height = (fmt->height + SCALER_RATIO_MAX - 1) / |
| SCALER_RATIO_MAX; |
| |
| if (rect->width < 16) |
| rect->width = 16; |
| |
| if (rect->height < 4) |
| rect->height = 4; |
| } |
| |
| /* |
| * vfe_try_crop - Handle try crop selection by pad subdev method |
| * @line: VFE line |
| * @sd_state: V4L2 subdev state |
| * @rect: pointer to v4l2 rect structure |
| * @which: wanted subdev format |
| */ |
| static void vfe_try_crop(struct vfe_line *line, |
| struct v4l2_subdev_state *sd_state, |
| struct v4l2_rect *rect, |
| enum v4l2_subdev_format_whence which) |
| { |
| struct v4l2_rect *compose; |
| |
| compose = __vfe_get_compose(line, sd_state, which); |
| |
| if (rect->width > compose->width) |
| rect->width = compose->width; |
| |
| if (rect->width + rect->left > compose->width) |
| rect->left = compose->width - rect->width; |
| |
| if (rect->height > compose->height) |
| rect->height = compose->height; |
| |
| if (rect->height + rect->top > compose->height) |
| rect->top = compose->height - rect->height; |
| |
| /* wm in line based mode writes multiple of 16 horizontally */ |
| rect->left += (rect->width & 0xf) >> 1; |
| rect->width &= ~0xf; |
| |
| if (rect->width < 16) { |
| rect->left = 0; |
| rect->width = 16; |
| } |
| |
| if (rect->height < 4) { |
| rect->top = 0; |
| rect->height = 4; |
| } |
| } |
| |
| /* |
| * vfe_enum_mbus_code - Handle pixel format enumeration |
| * @sd: VFE V4L2 subdevice |
| * @sd_state: V4L2 subdev state |
| * @code: pointer to v4l2_subdev_mbus_code_enum structure |
| * |
| * return -EINVAL or zero on success |
| */ |
| static int vfe_enum_mbus_code(struct v4l2_subdev *sd, |
| struct v4l2_subdev_state *sd_state, |
| struct v4l2_subdev_mbus_code_enum *code) |
| { |
| struct vfe_line *line = v4l2_get_subdevdata(sd); |
| |
| if (code->pad == MSM_VFE_PAD_SINK) { |
| if (code->index >= line->nformats) |
| return -EINVAL; |
| |
| code->code = line->formats[code->index].code; |
| } else { |
| struct v4l2_mbus_framefmt *sink_fmt; |
| |
| sink_fmt = __vfe_get_format(line, sd_state, MSM_VFE_PAD_SINK, |
| code->which); |
| |
| code->code = vfe_src_pad_code(line, sink_fmt->code, |
| code->index, 0); |
| if (!code->code) |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * vfe_enum_frame_size - Handle frame size enumeration |
| * @sd: VFE V4L2 subdevice |
| * @sd_state: V4L2 subdev state |
| * @fse: pointer to v4l2_subdev_frame_size_enum structure |
| * |
| * Return -EINVAL or zero on success |
| */ |
| static int vfe_enum_frame_size(struct v4l2_subdev *sd, |
| struct v4l2_subdev_state *sd_state, |
| struct v4l2_subdev_frame_size_enum *fse) |
| { |
| struct vfe_line *line = v4l2_get_subdevdata(sd); |
| struct v4l2_mbus_framefmt format; |
| |
| if (fse->index != 0) |
| return -EINVAL; |
| |
| format.code = fse->code; |
| format.width = 1; |
| format.height = 1; |
| vfe_try_format(line, sd_state, fse->pad, &format, fse->which); |
| fse->min_width = format.width; |
| fse->min_height = format.height; |
| |
| if (format.code != fse->code) |
| return -EINVAL; |
| |
| format.code = fse->code; |
| format.width = -1; |
| format.height = -1; |
| vfe_try_format(line, sd_state, fse->pad, &format, fse->which); |
| fse->max_width = format.width; |
| fse->max_height = format.height; |
| |
| return 0; |
| } |
| |
| /* |
| * vfe_get_format - Handle get format by pads subdev method |
| * @sd: VFE V4L2 subdevice |
| * @sd_state: V4L2 subdev state |
| * @fmt: pointer to v4l2 subdev format structure |
| * |
| * Return -EINVAL or zero on success |
| */ |
| static int vfe_get_format(struct v4l2_subdev *sd, |
| struct v4l2_subdev_state *sd_state, |
| struct v4l2_subdev_format *fmt) |
| { |
| struct vfe_line *line = v4l2_get_subdevdata(sd); |
| struct v4l2_mbus_framefmt *format; |
| |
| format = __vfe_get_format(line, sd_state, fmt->pad, fmt->which); |
| if (format == NULL) |
| return -EINVAL; |
| |
| fmt->format = *format; |
| |
| return 0; |
| } |
| |
| static int vfe_set_selection(struct v4l2_subdev *sd, |
| struct v4l2_subdev_state *sd_state, |
| struct v4l2_subdev_selection *sel); |
| |
| /* |
| * vfe_set_format - Handle set format by pads subdev method |
| * @sd: VFE V4L2 subdevice |
| * @sd_state: V4L2 subdev state |
| * @fmt: pointer to v4l2 subdev format structure |
| * |
| * Return -EINVAL or zero on success |
| */ |
| static int vfe_set_format(struct v4l2_subdev *sd, |
| struct v4l2_subdev_state *sd_state, |
| struct v4l2_subdev_format *fmt) |
| { |
| struct vfe_line *line = v4l2_get_subdevdata(sd); |
| struct v4l2_mbus_framefmt *format; |
| |
| format = __vfe_get_format(line, sd_state, fmt->pad, fmt->which); |
| if (format == NULL) |
| return -EINVAL; |
| |
| vfe_try_format(line, sd_state, fmt->pad, &fmt->format, fmt->which); |
| *format = fmt->format; |
| |
| if (fmt->pad == MSM_VFE_PAD_SINK) { |
| struct v4l2_subdev_selection sel = { 0 }; |
| int ret; |
| |
| /* Propagate the format from sink to source */ |
| format = __vfe_get_format(line, sd_state, MSM_VFE_PAD_SRC, |
| fmt->which); |
| |
| *format = fmt->format; |
| vfe_try_format(line, sd_state, MSM_VFE_PAD_SRC, format, |
| fmt->which); |
| |
| if (line->id != VFE_LINE_PIX) |
| return 0; |
| |
| /* Reset sink pad compose selection */ |
| sel.which = fmt->which; |
| sel.pad = MSM_VFE_PAD_SINK; |
| sel.target = V4L2_SEL_TGT_COMPOSE; |
| sel.r.width = fmt->format.width; |
| sel.r.height = fmt->format.height; |
| ret = vfe_set_selection(sd, sd_state, &sel); |
| if (ret < 0) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * vfe_get_selection - Handle get selection by pads subdev method |
| * @sd: VFE V4L2 subdevice |
| * @sd_state: V4L2 subdev state |
| * @sel: pointer to v4l2 subdev selection structure |
| * |
| * Return -EINVAL or zero on success |
| */ |
| static int vfe_get_selection(struct v4l2_subdev *sd, |
| struct v4l2_subdev_state *sd_state, |
| struct v4l2_subdev_selection *sel) |
| { |
| struct vfe_line *line = v4l2_get_subdevdata(sd); |
| struct v4l2_subdev_format fmt = { 0 }; |
| struct v4l2_rect *rect; |
| int ret; |
| |
| if (line->id != VFE_LINE_PIX) |
| return -EINVAL; |
| |
| if (sel->pad == MSM_VFE_PAD_SINK) |
| switch (sel->target) { |
| case V4L2_SEL_TGT_COMPOSE_BOUNDS: |
| fmt.pad = sel->pad; |
| fmt.which = sel->which; |
| ret = vfe_get_format(sd, sd_state, &fmt); |
| if (ret < 0) |
| return ret; |
| |
| sel->r.left = 0; |
| sel->r.top = 0; |
| sel->r.width = fmt.format.width; |
| sel->r.height = fmt.format.height; |
| break; |
| case V4L2_SEL_TGT_COMPOSE: |
| rect = __vfe_get_compose(line, sd_state, sel->which); |
| if (rect == NULL) |
| return -EINVAL; |
| |
| sel->r = *rect; |
| break; |
| default: |
| return -EINVAL; |
| } |
| else if (sel->pad == MSM_VFE_PAD_SRC) |
| switch (sel->target) { |
| case V4L2_SEL_TGT_CROP_BOUNDS: |
| rect = __vfe_get_compose(line, sd_state, sel->which); |
| if (rect == NULL) |
| return -EINVAL; |
| |
| sel->r.left = rect->left; |
| sel->r.top = rect->top; |
| sel->r.width = rect->width; |
| sel->r.height = rect->height; |
| break; |
| case V4L2_SEL_TGT_CROP: |
| rect = __vfe_get_crop(line, sd_state, sel->which); |
| if (rect == NULL) |
| return -EINVAL; |
| |
| sel->r = *rect; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * vfe_set_selection - Handle set selection by pads subdev method |
| * @sd: VFE V4L2 subdevice |
| * @sd_state: V4L2 subdev state |
| * @sel: pointer to v4l2 subdev selection structure |
| * |
| * Return -EINVAL or zero on success |
| */ |
| static int vfe_set_selection(struct v4l2_subdev *sd, |
| struct v4l2_subdev_state *sd_state, |
| struct v4l2_subdev_selection *sel) |
| { |
| struct vfe_line *line = v4l2_get_subdevdata(sd); |
| struct v4l2_rect *rect; |
| int ret; |
| |
| if (line->id != VFE_LINE_PIX) |
| return -EINVAL; |
| |
| if (sel->target == V4L2_SEL_TGT_COMPOSE && |
| sel->pad == MSM_VFE_PAD_SINK) { |
| struct v4l2_subdev_selection crop = { 0 }; |
| |
| rect = __vfe_get_compose(line, sd_state, sel->which); |
| if (rect == NULL) |
| return -EINVAL; |
| |
| vfe_try_compose(line, sd_state, &sel->r, sel->which); |
| *rect = sel->r; |
| |
| /* Reset source crop selection */ |
| crop.which = sel->which; |
| crop.pad = MSM_VFE_PAD_SRC; |
| crop.target = V4L2_SEL_TGT_CROP; |
| crop.r = *rect; |
| ret = vfe_set_selection(sd, sd_state, &crop); |
| } else if (sel->target == V4L2_SEL_TGT_CROP && |
| sel->pad == MSM_VFE_PAD_SRC) { |
| struct v4l2_subdev_format fmt = { 0 }; |
| |
| rect = __vfe_get_crop(line, sd_state, sel->which); |
| if (rect == NULL) |
| return -EINVAL; |
| |
| vfe_try_crop(line, sd_state, &sel->r, sel->which); |
| *rect = sel->r; |
| |
| /* Reset source pad format width and height */ |
| fmt.which = sel->which; |
| fmt.pad = MSM_VFE_PAD_SRC; |
| ret = vfe_get_format(sd, sd_state, &fmt); |
| if (ret < 0) |
| return ret; |
| |
| fmt.format.width = rect->width; |
| fmt.format.height = rect->height; |
| ret = vfe_set_format(sd, sd_state, &fmt); |
| } else { |
| ret = -EINVAL; |
| } |
| |
| return ret; |
| } |
| |
| /* |
| * vfe_init_formats - Initialize formats on all pads |
| * @sd: VFE V4L2 subdevice |
| * @fh: V4L2 subdev file handle |
| * |
| * Initialize all pad formats with default values. |
| * |
| * Return 0 on success or a negative error code otherwise |
| */ |
| static int vfe_init_formats(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) |
| { |
| struct v4l2_subdev_format format = { |
| .pad = MSM_VFE_PAD_SINK, |
| .which = fh ? V4L2_SUBDEV_FORMAT_TRY : |
| V4L2_SUBDEV_FORMAT_ACTIVE, |
| .format = { |
| .code = MEDIA_BUS_FMT_UYVY8_1X16, |
| .width = 1920, |
| .height = 1080 |
| } |
| }; |
| |
| return vfe_set_format(sd, fh ? fh->state : NULL, &format); |
| } |
| |
| /* |
| * msm_vfe_subdev_init - Initialize VFE device structure and resources |
| * @vfe: VFE device |
| * @res: VFE module resources table |
| * |
| * Return 0 on success or a negative error code otherwise |
| */ |
| int msm_vfe_subdev_init(struct camss *camss, struct vfe_device *vfe, |
| const struct camss_subdev_resources *res, u8 id) |
| { |
| struct device *dev = camss->dev; |
| struct platform_device *pdev = to_platform_device(dev); |
| int i, j; |
| int ret; |
| |
| if (!res->vfe.line_num) |
| return -EINVAL; |
| |
| vfe->res = &res->vfe; |
| vfe->res->hw_ops->subdev_init(dev, vfe); |
| |
| /* Power domain */ |
| |
| if (res->vfe.pd_name) { |
| vfe->genpd = dev_pm_domain_attach_by_name(camss->dev, |
| res->vfe.pd_name); |
| if (IS_ERR(vfe->genpd)) { |
| ret = PTR_ERR(vfe->genpd); |
| return ret; |
| } |
| } |
| |
| if (!vfe->genpd && res->vfe.has_pd) { |
| /* |
| * Legacy magic index. |
| * Requires |
| * power-domain = <VFE_X>, |
| * <VFE_Y>, |
| * <TITAN_TOP> |
| * id must correspondng to the index of the VFE which must |
| * come before the TOP GDSC. VFE Lite has no individually |
| * collapasible domain which is why id < vfe_num is a valid |
| * check. |
| */ |
| vfe->genpd = dev_pm_domain_attach_by_id(camss->dev, id); |
| if (IS_ERR(vfe->genpd)) |
| return PTR_ERR(vfe->genpd); |
| } |
| |
| /* Memory */ |
| |
| vfe->base = devm_platform_ioremap_resource_byname(pdev, res->reg[0]); |
| if (IS_ERR(vfe->base)) { |
| dev_err(dev, "could not map memory\n"); |
| return PTR_ERR(vfe->base); |
| } |
| |
| /* Interrupt */ |
| |
| ret = platform_get_irq_byname(pdev, res->interrupt[0]); |
| if (ret < 0) |
| return ret; |
| |
| vfe->irq = ret; |
| snprintf(vfe->irq_name, sizeof(vfe->irq_name), "%s_%s%d", |
| dev_name(dev), MSM_VFE_NAME, id); |
| ret = devm_request_irq(dev, vfe->irq, vfe->res->hw_ops->isr, |
| IRQF_TRIGGER_RISING, vfe->irq_name, vfe); |
| if (ret < 0) { |
| dev_err(dev, "request_irq failed: %d\n", ret); |
| return ret; |
| } |
| |
| /* Clocks */ |
| |
| vfe->nclocks = 0; |
| while (res->clock[vfe->nclocks]) |
| vfe->nclocks++; |
| |
| vfe->clock = devm_kcalloc(dev, vfe->nclocks, sizeof(*vfe->clock), |
| GFP_KERNEL); |
| if (!vfe->clock) |
| return -ENOMEM; |
| |
| for (i = 0; i < vfe->nclocks; i++) { |
| struct camss_clock *clock = &vfe->clock[i]; |
| |
| clock->clk = devm_clk_get(dev, res->clock[i]); |
| if (IS_ERR(clock->clk)) |
| return PTR_ERR(clock->clk); |
| |
| clock->name = res->clock[i]; |
| |
| clock->nfreqs = 0; |
| while (res->clock_rate[i][clock->nfreqs]) |
| clock->nfreqs++; |
| |
| if (!clock->nfreqs) { |
| clock->freq = NULL; |
| continue; |
| } |
| |
| clock->freq = devm_kcalloc(dev, |
| clock->nfreqs, |
| sizeof(*clock->freq), |
| GFP_KERNEL); |
| if (!clock->freq) |
| return -ENOMEM; |
| |
| for (j = 0; j < clock->nfreqs; j++) |
| clock->freq[j] = res->clock_rate[i][j]; |
| } |
| |
| mutex_init(&vfe->power_lock); |
| vfe->power_count = 0; |
| |
| mutex_init(&vfe->stream_lock); |
| vfe->stream_count = 0; |
| |
| spin_lock_init(&vfe->output_lock); |
| |
| vfe->camss = camss; |
| vfe->id = id; |
| vfe->reg_update = 0; |
| |
| for (i = VFE_LINE_RDI0; i < vfe->res->line_num; i++) { |
| struct vfe_line *l = &vfe->line[i]; |
| |
| l->video_out.type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE; |
| l->video_out.camss = camss; |
| l->id = i; |
| init_completion(&l->output.sof); |
| init_completion(&l->output.reg_update); |
| |
| if (i == VFE_LINE_PIX) { |
| l->nformats = res->vfe.formats_pix->nformats; |
| l->formats = res->vfe.formats_pix->formats; |
| } else { |
| l->nformats = res->vfe.formats_rdi->nformats; |
| l->formats = res->vfe.formats_rdi->formats; |
| } |
| } |
| |
| init_completion(&vfe->reset_complete); |
| init_completion(&vfe->halt_complete); |
| |
| return 0; |
| } |
| |
| /* |
| * msm_vfe_genpd_cleanup - Cleanup VFE genpd linkages |
| * @vfe: VFE device |
| */ |
| void msm_vfe_genpd_cleanup(struct vfe_device *vfe) |
| { |
| if (vfe->genpd_link) |
| device_link_del(vfe->genpd_link); |
| |
| if (vfe->genpd) |
| dev_pm_domain_detach(vfe->genpd, true); |
| } |
| |
| /* |
| * vfe_link_setup - Setup VFE connections |
| * @entity: Pointer to media entity structure |
| * @local: Pointer to local pad |
| * @remote: Pointer to remote pad |
| * @flags: Link flags |
| * |
| * Return 0 on success |
| */ |
| static int vfe_link_setup(struct media_entity *entity, |
| const struct media_pad *local, |
| const struct media_pad *remote, u32 flags) |
| { |
| if (flags & MEDIA_LNK_FL_ENABLED) |
| if (media_pad_remote_pad_first(local)) |
| return -EBUSY; |
| |
| return 0; |
| } |
| |
| static const struct v4l2_subdev_core_ops vfe_core_ops = { |
| .s_power = vfe_set_power, |
| }; |
| |
| static const struct v4l2_subdev_video_ops vfe_video_ops = { |
| .s_stream = vfe_set_stream, |
| }; |
| |
| static const struct v4l2_subdev_pad_ops vfe_pad_ops = { |
| .enum_mbus_code = vfe_enum_mbus_code, |
| .enum_frame_size = vfe_enum_frame_size, |
| .get_fmt = vfe_get_format, |
| .set_fmt = vfe_set_format, |
| .get_selection = vfe_get_selection, |
| .set_selection = vfe_set_selection, |
| }; |
| |
| static const struct v4l2_subdev_ops vfe_v4l2_ops = { |
| .core = &vfe_core_ops, |
| .video = &vfe_video_ops, |
| .pad = &vfe_pad_ops, |
| }; |
| |
| static const struct v4l2_subdev_internal_ops vfe_v4l2_internal_ops = { |
| .open = vfe_init_formats, |
| }; |
| |
| static const struct media_entity_operations vfe_media_ops = { |
| .link_setup = vfe_link_setup, |
| .link_validate = v4l2_subdev_link_validate, |
| }; |
| |
| static int vfe_bpl_align(struct vfe_device *vfe) |
| { |
| int ret = 8; |
| |
| switch (vfe->camss->res->version) { |
| case CAMSS_845: |
| case CAMSS_8250: |
| case CAMSS_8280XP: |
| ret = 16; |
| break; |
| default: |
| break; |
| } |
| |
| return ret; |
| } |
| |
| /* |
| * msm_vfe_register_entities - Register subdev node for VFE module |
| * @vfe: VFE device |
| * @v4l2_dev: V4L2 device |
| * |
| * Initialize and register a subdev node for the VFE module. Then |
| * call msm_video_register() to register the video device node which |
| * will be connected to this subdev node. Then actually create the |
| * media link between them. |
| * |
| * Return 0 on success or a negative error code otherwise |
| */ |
| int msm_vfe_register_entities(struct vfe_device *vfe, |
| struct v4l2_device *v4l2_dev) |
| { |
| struct device *dev = vfe->camss->dev; |
| struct v4l2_subdev *sd; |
| struct media_pad *pads; |
| struct camss_video *video_out; |
| int ret; |
| int i; |
| |
| for (i = 0; i < vfe->res->line_num; i++) { |
| char name[32]; |
| |
| sd = &vfe->line[i].subdev; |
| pads = vfe->line[i].pads; |
| video_out = &vfe->line[i].video_out; |
| |
| v4l2_subdev_init(sd, &vfe_v4l2_ops); |
| sd->internal_ops = &vfe_v4l2_internal_ops; |
| sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; |
| if (i == VFE_LINE_PIX) |
| snprintf(sd->name, ARRAY_SIZE(sd->name), "%s%d_%s", |
| MSM_VFE_NAME, vfe->id, "pix"); |
| else |
| snprintf(sd->name, ARRAY_SIZE(sd->name), "%s%d_%s%d", |
| MSM_VFE_NAME, vfe->id, "rdi", i); |
| |
| v4l2_set_subdevdata(sd, &vfe->line[i]); |
| |
| ret = vfe_init_formats(sd, NULL); |
| if (ret < 0) { |
| dev_err(dev, "Failed to init format: %d\n", ret); |
| goto error_init; |
| } |
| |
| pads[MSM_VFE_PAD_SINK].flags = MEDIA_PAD_FL_SINK; |
| pads[MSM_VFE_PAD_SRC].flags = MEDIA_PAD_FL_SOURCE; |
| |
| sd->entity.function = MEDIA_ENT_F_PROC_VIDEO_PIXEL_FORMATTER; |
| sd->entity.ops = &vfe_media_ops; |
| ret = media_entity_pads_init(&sd->entity, MSM_VFE_PADS_NUM, |
| pads); |
| if (ret < 0) { |
| dev_err(dev, "Failed to init media entity: %d\n", ret); |
| goto error_init; |
| } |
| |
| ret = v4l2_device_register_subdev(v4l2_dev, sd); |
| if (ret < 0) { |
| dev_err(dev, "Failed to register subdev: %d\n", ret); |
| goto error_reg_subdev; |
| } |
| |
| video_out->ops = &vfe->video_ops; |
| video_out->bpl_alignment = vfe_bpl_align(vfe); |
| video_out->line_based = 0; |
| if (i == VFE_LINE_PIX) { |
| video_out->bpl_alignment = 16; |
| video_out->line_based = 1; |
| } |
| |
| video_out->nformats = vfe->line[i].nformats; |
| video_out->formats = vfe->line[i].formats; |
| |
| snprintf(name, ARRAY_SIZE(name), "%s%d_%s%d", |
| MSM_VFE_NAME, vfe->id, "video", i); |
| ret = msm_video_register(video_out, v4l2_dev, name); |
| if (ret < 0) { |
| dev_err(dev, "Failed to register video node: %d\n", |
| ret); |
| goto error_reg_video; |
| } |
| |
| ret = media_create_pad_link( |
| &sd->entity, MSM_VFE_PAD_SRC, |
| &video_out->vdev.entity, 0, |
| MEDIA_LNK_FL_IMMUTABLE | MEDIA_LNK_FL_ENABLED); |
| if (ret < 0) { |
| dev_err(dev, "Failed to link %s->%s entities: %d\n", |
| sd->entity.name, video_out->vdev.entity.name, |
| ret); |
| goto error_link; |
| } |
| } |
| |
| return 0; |
| |
| error_link: |
| msm_video_unregister(video_out); |
| |
| error_reg_video: |
| v4l2_device_unregister_subdev(sd); |
| |
| error_reg_subdev: |
| media_entity_cleanup(&sd->entity); |
| |
| error_init: |
| for (i--; i >= 0; i--) { |
| sd = &vfe->line[i].subdev; |
| video_out = &vfe->line[i].video_out; |
| |
| msm_video_unregister(video_out); |
| v4l2_device_unregister_subdev(sd); |
| media_entity_cleanup(&sd->entity); |
| } |
| |
| return ret; |
| } |
| |
| /* |
| * msm_vfe_unregister_entities - Unregister VFE module subdev node |
| * @vfe: VFE device |
| */ |
| void msm_vfe_unregister_entities(struct vfe_device *vfe) |
| { |
| int i; |
| |
| mutex_destroy(&vfe->power_lock); |
| mutex_destroy(&vfe->stream_lock); |
| |
| for (i = 0; i < vfe->res->line_num; i++) { |
| struct v4l2_subdev *sd = &vfe->line[i].subdev; |
| struct camss_video *video_out = &vfe->line[i].video_out; |
| |
| msm_video_unregister(video_out); |
| v4l2_device_unregister_subdev(sd); |
| media_entity_cleanup(&sd->entity); |
| } |
| } |
| |
| bool vfe_is_lite(struct vfe_device *vfe) |
| { |
| return vfe->camss->res->vfe_res[vfe->id].vfe.is_lite; |
| } |