| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Hantro VPU codec driver |
| * |
| * Copyright (C) 2018 Collabora, Ltd. |
| * Copyright 2018 Google LLC. |
| * Tomasz Figa <tfiga@chromium.org> |
| * |
| * Based on s5p-mfc driver by Samsung Electronics Co., Ltd. |
| * Copyright (C) 2011 Samsung Electronics Co., Ltd. |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/platform_device.h> |
| #include <linux/pm.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/slab.h> |
| #include <linux/videodev2.h> |
| #include <linux/workqueue.h> |
| #include <media/v4l2-event.h> |
| #include <media/v4l2-mem2mem.h> |
| #include <media/videobuf2-core.h> |
| #include <media/videobuf2-vmalloc.h> |
| |
| #include "hantro_v4l2.h" |
| #include "hantro.h" |
| #include "hantro_hw.h" |
| |
| #define DRIVER_NAME "hantro-vpu" |
| |
| int hantro_debug; |
| module_param_named(debug, hantro_debug, int, 0644); |
| MODULE_PARM_DESC(debug, |
| "Debug level - higher value produces more verbose messages"); |
| |
| void *hantro_get_ctrl(struct hantro_ctx *ctx, u32 id) |
| { |
| struct v4l2_ctrl *ctrl; |
| |
| ctrl = v4l2_ctrl_find(&ctx->ctrl_handler, id); |
| return ctrl ? ctrl->p_cur.p : NULL; |
| } |
| |
| dma_addr_t hantro_get_ref(struct hantro_ctx *ctx, u64 ts) |
| { |
| struct vb2_queue *q = v4l2_m2m_get_dst_vq(ctx->fh.m2m_ctx); |
| struct vb2_buffer *buf; |
| |
| buf = vb2_find_buffer(q, ts); |
| if (!buf) |
| return 0; |
| return hantro_get_dec_buf_addr(ctx, buf); |
| } |
| |
| static const struct v4l2_event hantro_eos_event = { |
| .type = V4L2_EVENT_EOS |
| }; |
| |
| static void hantro_job_finish_no_pm(struct hantro_dev *vpu, |
| struct hantro_ctx *ctx, |
| enum vb2_buffer_state result) |
| { |
| struct vb2_v4l2_buffer *src, *dst; |
| |
| src = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx); |
| dst = v4l2_m2m_next_dst_buf(ctx->fh.m2m_ctx); |
| |
| if (WARN_ON(!src)) |
| return; |
| if (WARN_ON(!dst)) |
| return; |
| |
| src->sequence = ctx->sequence_out++; |
| dst->sequence = ctx->sequence_cap++; |
| |
| if (v4l2_m2m_is_last_draining_src_buf(ctx->fh.m2m_ctx, src)) { |
| dst->flags |= V4L2_BUF_FLAG_LAST; |
| v4l2_event_queue_fh(&ctx->fh, &hantro_eos_event); |
| v4l2_m2m_mark_stopped(ctx->fh.m2m_ctx); |
| } |
| |
| v4l2_m2m_buf_done_and_job_finish(ctx->dev->m2m_dev, ctx->fh.m2m_ctx, |
| result); |
| } |
| |
| static void hantro_job_finish(struct hantro_dev *vpu, |
| struct hantro_ctx *ctx, |
| enum vb2_buffer_state result) |
| { |
| pm_runtime_mark_last_busy(vpu->dev); |
| pm_runtime_put_autosuspend(vpu->dev); |
| |
| clk_bulk_disable(vpu->variant->num_clocks, vpu->clocks); |
| |
| hantro_job_finish_no_pm(vpu, ctx, result); |
| } |
| |
| void hantro_irq_done(struct hantro_dev *vpu, |
| enum vb2_buffer_state result) |
| { |
| struct hantro_ctx *ctx = |
| v4l2_m2m_get_curr_priv(vpu->m2m_dev); |
| |
| /* |
| * If cancel_delayed_work returns false |
| * the timeout expired. The watchdog is running, |
| * and will take care of finishing the job. |
| */ |
| if (cancel_delayed_work(&vpu->watchdog_work)) { |
| if (result == VB2_BUF_STATE_DONE && ctx->codec_ops->done) |
| ctx->codec_ops->done(ctx); |
| hantro_job_finish(vpu, ctx, result); |
| } |
| } |
| |
| void hantro_watchdog(struct work_struct *work) |
| { |
| struct hantro_dev *vpu; |
| struct hantro_ctx *ctx; |
| |
| vpu = container_of(to_delayed_work(work), |
| struct hantro_dev, watchdog_work); |
| ctx = v4l2_m2m_get_curr_priv(vpu->m2m_dev); |
| if (ctx) { |
| vpu_err("frame processing timed out!\n"); |
| if (ctx->codec_ops->reset) |
| ctx->codec_ops->reset(ctx); |
| hantro_job_finish(vpu, ctx, VB2_BUF_STATE_ERROR); |
| } |
| } |
| |
| void hantro_start_prepare_run(struct hantro_ctx *ctx) |
| { |
| struct vb2_v4l2_buffer *src_buf; |
| |
| src_buf = hantro_get_src_buf(ctx); |
| v4l2_ctrl_request_setup(src_buf->vb2_buf.req_obj.req, |
| &ctx->ctrl_handler); |
| |
| if (!ctx->is_encoder && !ctx->dev->variant->late_postproc) { |
| if (hantro_needs_postproc(ctx, ctx->vpu_dst_fmt)) |
| hantro_postproc_enable(ctx); |
| else |
| hantro_postproc_disable(ctx); |
| } |
| } |
| |
| void hantro_end_prepare_run(struct hantro_ctx *ctx) |
| { |
| struct vb2_v4l2_buffer *src_buf; |
| |
| if (!ctx->is_encoder && ctx->dev->variant->late_postproc) { |
| if (hantro_needs_postproc(ctx, ctx->vpu_dst_fmt)) |
| hantro_postproc_enable(ctx); |
| else |
| hantro_postproc_disable(ctx); |
| } |
| |
| src_buf = hantro_get_src_buf(ctx); |
| v4l2_ctrl_request_complete(src_buf->vb2_buf.req_obj.req, |
| &ctx->ctrl_handler); |
| |
| /* Kick the watchdog. */ |
| schedule_delayed_work(&ctx->dev->watchdog_work, |
| msecs_to_jiffies(2000)); |
| } |
| |
| static void device_run(void *priv) |
| { |
| struct hantro_ctx *ctx = priv; |
| struct vb2_v4l2_buffer *src, *dst; |
| int ret; |
| |
| src = hantro_get_src_buf(ctx); |
| dst = hantro_get_dst_buf(ctx); |
| |
| ret = pm_runtime_resume_and_get(ctx->dev->dev); |
| if (ret < 0) |
| goto err_cancel_job; |
| |
| ret = clk_bulk_enable(ctx->dev->variant->num_clocks, ctx->dev->clocks); |
| if (ret) |
| goto err_cancel_job; |
| |
| v4l2_m2m_buf_copy_metadata(src, dst, true); |
| |
| if (ctx->codec_ops->run(ctx)) |
| goto err_cancel_job; |
| |
| return; |
| |
| err_cancel_job: |
| hantro_job_finish_no_pm(ctx->dev, ctx, VB2_BUF_STATE_ERROR); |
| } |
| |
| static const struct v4l2_m2m_ops vpu_m2m_ops = { |
| .device_run = device_run, |
| }; |
| |
| static int |
| queue_init(void *priv, struct vb2_queue *src_vq, struct vb2_queue *dst_vq) |
| { |
| struct hantro_ctx *ctx = priv; |
| int ret; |
| |
| src_vq->type = V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE; |
| src_vq->io_modes = VB2_MMAP | VB2_DMABUF; |
| src_vq->drv_priv = ctx; |
| src_vq->ops = &hantro_queue_ops; |
| src_vq->mem_ops = &vb2_dma_contig_memops; |
| |
| /* |
| * Driver does mostly sequential access, so sacrifice TLB efficiency |
| * for faster allocation. Also, no CPU access on the source queue, |
| * so no kernel mapping needed. |
| */ |
| src_vq->dma_attrs = DMA_ATTR_ALLOC_SINGLE_PAGES | |
| DMA_ATTR_NO_KERNEL_MAPPING; |
| src_vq->buf_struct_size = sizeof(struct v4l2_m2m_buffer); |
| src_vq->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_COPY; |
| src_vq->lock = &ctx->dev->vpu_mutex; |
| src_vq->dev = ctx->dev->v4l2_dev.dev; |
| src_vq->supports_requests = true; |
| |
| ret = vb2_queue_init(src_vq); |
| if (ret) |
| return ret; |
| |
| dst_vq->bidirectional = true; |
| dst_vq->mem_ops = &vb2_dma_contig_memops; |
| dst_vq->dma_attrs = DMA_ATTR_ALLOC_SINGLE_PAGES; |
| /* |
| * The Kernel needs access to the JPEG destination buffer for the |
| * JPEG encoder to fill in the JPEG headers. |
| */ |
| if (!ctx->is_encoder) { |
| dst_vq->dma_attrs |= DMA_ATTR_NO_KERNEL_MAPPING; |
| dst_vq->max_num_buffers = MAX_POSTPROC_BUFFERS; |
| } |
| |
| dst_vq->type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE; |
| dst_vq->io_modes = VB2_MMAP | VB2_DMABUF; |
| dst_vq->drv_priv = ctx; |
| dst_vq->ops = &hantro_queue_ops; |
| dst_vq->buf_struct_size = sizeof(struct hantro_decoded_buffer); |
| dst_vq->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_COPY; |
| dst_vq->lock = &ctx->dev->vpu_mutex; |
| dst_vq->dev = ctx->dev->v4l2_dev.dev; |
| |
| return vb2_queue_init(dst_vq); |
| } |
| |
| static int hantro_try_ctrl(struct v4l2_ctrl *ctrl) |
| { |
| if (ctrl->id == V4L2_CID_STATELESS_H264_SPS) { |
| const struct v4l2_ctrl_h264_sps *sps = ctrl->p_new.p_h264_sps; |
| |
| if (sps->chroma_format_idc > 1) |
| /* Only 4:0:0 and 4:2:0 are supported */ |
| return -EINVAL; |
| if (sps->bit_depth_luma_minus8 != sps->bit_depth_chroma_minus8) |
| /* Luma and chroma bit depth mismatch */ |
| return -EINVAL; |
| if (sps->bit_depth_luma_minus8 != 0) |
| /* Only 8-bit is supported */ |
| return -EINVAL; |
| } else if (ctrl->id == V4L2_CID_STATELESS_HEVC_SPS) { |
| const struct v4l2_ctrl_hevc_sps *sps = ctrl->p_new.p_hevc_sps; |
| |
| if (sps->bit_depth_luma_minus8 != 0 && sps->bit_depth_luma_minus8 != 2) |
| /* Only 8-bit and 10-bit are supported */ |
| return -EINVAL; |
| } else if (ctrl->id == V4L2_CID_STATELESS_VP9_FRAME) { |
| const struct v4l2_ctrl_vp9_frame *dec_params = ctrl->p_new.p_vp9_frame; |
| |
| /* We only support profile 0 */ |
| if (dec_params->profile != 0) |
| return -EINVAL; |
| } else if (ctrl->id == V4L2_CID_STATELESS_AV1_SEQUENCE) { |
| const struct v4l2_ctrl_av1_sequence *sequence = ctrl->p_new.p_av1_sequence; |
| |
| if (sequence->bit_depth != 8 && sequence->bit_depth != 10) |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int hantro_jpeg_s_ctrl(struct v4l2_ctrl *ctrl) |
| { |
| struct hantro_ctx *ctx; |
| |
| ctx = container_of(ctrl->handler, |
| struct hantro_ctx, ctrl_handler); |
| |
| vpu_debug(1, "s_ctrl: id = %d, val = %d\n", ctrl->id, ctrl->val); |
| |
| switch (ctrl->id) { |
| case V4L2_CID_JPEG_COMPRESSION_QUALITY: |
| ctx->jpeg_quality = ctrl->val; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int hantro_vp9_s_ctrl(struct v4l2_ctrl *ctrl) |
| { |
| struct hantro_ctx *ctx; |
| |
| ctx = container_of(ctrl->handler, |
| struct hantro_ctx, ctrl_handler); |
| |
| switch (ctrl->id) { |
| case V4L2_CID_STATELESS_VP9_FRAME: { |
| int bit_depth = ctrl->p_new.p_vp9_frame->bit_depth; |
| |
| if (ctx->bit_depth == bit_depth) |
| return 0; |
| |
| return hantro_reset_raw_fmt(ctx, bit_depth, HANTRO_AUTO_POSTPROC); |
| } |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int hantro_hevc_s_ctrl(struct v4l2_ctrl *ctrl) |
| { |
| struct hantro_ctx *ctx; |
| |
| ctx = container_of(ctrl->handler, |
| struct hantro_ctx, ctrl_handler); |
| |
| switch (ctrl->id) { |
| case V4L2_CID_STATELESS_HEVC_SPS: { |
| const struct v4l2_ctrl_hevc_sps *sps = ctrl->p_new.p_hevc_sps; |
| int bit_depth = sps->bit_depth_luma_minus8 + 8; |
| |
| if (ctx->bit_depth == bit_depth) |
| return 0; |
| |
| return hantro_reset_raw_fmt(ctx, bit_depth, HANTRO_AUTO_POSTPROC); |
| } |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int hantro_av1_s_ctrl(struct v4l2_ctrl *ctrl) |
| { |
| struct hantro_ctx *ctx; |
| |
| ctx = container_of(ctrl->handler, |
| struct hantro_ctx, ctrl_handler); |
| |
| switch (ctrl->id) { |
| case V4L2_CID_STATELESS_AV1_SEQUENCE: |
| { |
| int bit_depth = ctrl->p_new.p_av1_sequence->bit_depth; |
| bool need_postproc = HANTRO_AUTO_POSTPROC; |
| |
| if (ctrl->p_new.p_av1_sequence->flags |
| & V4L2_AV1_SEQUENCE_FLAG_FILM_GRAIN_PARAMS_PRESENT) |
| need_postproc = HANTRO_FORCE_POSTPROC; |
| |
| if (ctx->bit_depth == bit_depth && |
| ctx->need_postproc == need_postproc) |
| return 0; |
| |
| return hantro_reset_raw_fmt(ctx, bit_depth, need_postproc); |
| } |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static const struct v4l2_ctrl_ops hantro_ctrl_ops = { |
| .try_ctrl = hantro_try_ctrl, |
| }; |
| |
| static const struct v4l2_ctrl_ops hantro_jpeg_ctrl_ops = { |
| .s_ctrl = hantro_jpeg_s_ctrl, |
| }; |
| |
| static const struct v4l2_ctrl_ops hantro_vp9_ctrl_ops = { |
| .s_ctrl = hantro_vp9_s_ctrl, |
| }; |
| |
| static const struct v4l2_ctrl_ops hantro_hevc_ctrl_ops = { |
| .try_ctrl = hantro_try_ctrl, |
| .s_ctrl = hantro_hevc_s_ctrl, |
| }; |
| |
| static const struct v4l2_ctrl_ops hantro_av1_ctrl_ops = { |
| .try_ctrl = hantro_try_ctrl, |
| .s_ctrl = hantro_av1_s_ctrl, |
| }; |
| |
| #define HANTRO_JPEG_ACTIVE_MARKERS (V4L2_JPEG_ACTIVE_MARKER_APP0 | \ |
| V4L2_JPEG_ACTIVE_MARKER_COM | \ |
| V4L2_JPEG_ACTIVE_MARKER_DQT | \ |
| V4L2_JPEG_ACTIVE_MARKER_DHT) |
| |
| static const struct hantro_ctrl controls[] = { |
| { |
| .codec = HANTRO_JPEG_ENCODER, |
| .cfg = { |
| .id = V4L2_CID_JPEG_COMPRESSION_QUALITY, |
| .min = 5, |
| .max = 100, |
| .step = 1, |
| .def = 50, |
| .ops = &hantro_jpeg_ctrl_ops, |
| }, |
| }, { |
| .codec = HANTRO_JPEG_ENCODER, |
| .cfg = { |
| .id = V4L2_CID_JPEG_ACTIVE_MARKER, |
| .max = HANTRO_JPEG_ACTIVE_MARKERS, |
| .def = HANTRO_JPEG_ACTIVE_MARKERS, |
| /* |
| * Changing the set of active markers/segments also |
| * messes up the alignment of the JPEG header, which |
| * is needed to allow the hardware to write directly |
| * to the output buffer. Implementing this introduces |
| * a lot of complexity for little gain, as the markers |
| * enabled is already the minimum required set. |
| */ |
| .flags = V4L2_CTRL_FLAG_READ_ONLY, |
| }, |
| }, { |
| .codec = HANTRO_MPEG2_DECODER, |
| .cfg = { |
| .id = V4L2_CID_STATELESS_MPEG2_SEQUENCE, |
| }, |
| }, { |
| .codec = HANTRO_MPEG2_DECODER, |
| .cfg = { |
| .id = V4L2_CID_STATELESS_MPEG2_PICTURE, |
| }, |
| }, { |
| .codec = HANTRO_MPEG2_DECODER, |
| .cfg = { |
| .id = V4L2_CID_STATELESS_MPEG2_QUANTISATION, |
| }, |
| }, { |
| .codec = HANTRO_VP8_DECODER, |
| .cfg = { |
| .id = V4L2_CID_STATELESS_VP8_FRAME, |
| }, |
| }, { |
| .codec = HANTRO_H264_DECODER, |
| .cfg = { |
| .id = V4L2_CID_STATELESS_H264_DECODE_PARAMS, |
| }, |
| }, { |
| .codec = HANTRO_H264_DECODER, |
| .cfg = { |
| .id = V4L2_CID_STATELESS_H264_SPS, |
| .ops = &hantro_ctrl_ops, |
| }, |
| }, { |
| .codec = HANTRO_H264_DECODER, |
| .cfg = { |
| .id = V4L2_CID_STATELESS_H264_PPS, |
| }, |
| }, { |
| .codec = HANTRO_H264_DECODER, |
| .cfg = { |
| .id = V4L2_CID_STATELESS_H264_SCALING_MATRIX, |
| }, |
| }, { |
| .codec = HANTRO_H264_DECODER, |
| .cfg = { |
| .id = V4L2_CID_STATELESS_H264_DECODE_MODE, |
| .min = V4L2_STATELESS_H264_DECODE_MODE_FRAME_BASED, |
| .def = V4L2_STATELESS_H264_DECODE_MODE_FRAME_BASED, |
| .max = V4L2_STATELESS_H264_DECODE_MODE_FRAME_BASED, |
| }, |
| }, { |
| .codec = HANTRO_H264_DECODER, |
| .cfg = { |
| .id = V4L2_CID_STATELESS_H264_START_CODE, |
| .min = V4L2_STATELESS_H264_START_CODE_ANNEX_B, |
| .def = V4L2_STATELESS_H264_START_CODE_ANNEX_B, |
| .max = V4L2_STATELESS_H264_START_CODE_ANNEX_B, |
| }, |
| }, { |
| .codec = HANTRO_H264_DECODER, |
| .cfg = { |
| .id = V4L2_CID_MPEG_VIDEO_H264_PROFILE, |
| .min = V4L2_MPEG_VIDEO_H264_PROFILE_BASELINE, |
| .max = V4L2_MPEG_VIDEO_H264_PROFILE_HIGH, |
| .menu_skip_mask = |
| BIT(V4L2_MPEG_VIDEO_H264_PROFILE_EXTENDED), |
| .def = V4L2_MPEG_VIDEO_H264_PROFILE_MAIN, |
| } |
| }, { |
| .codec = HANTRO_HEVC_DECODER, |
| .cfg = { |
| .id = V4L2_CID_STATELESS_HEVC_DECODE_MODE, |
| .min = V4L2_STATELESS_HEVC_DECODE_MODE_FRAME_BASED, |
| .max = V4L2_STATELESS_HEVC_DECODE_MODE_FRAME_BASED, |
| .def = V4L2_STATELESS_HEVC_DECODE_MODE_FRAME_BASED, |
| }, |
| }, { |
| .codec = HANTRO_HEVC_DECODER, |
| .cfg = { |
| .id = V4L2_CID_STATELESS_HEVC_START_CODE, |
| .min = V4L2_STATELESS_HEVC_START_CODE_ANNEX_B, |
| .max = V4L2_STATELESS_HEVC_START_CODE_ANNEX_B, |
| .def = V4L2_STATELESS_HEVC_START_CODE_ANNEX_B, |
| }, |
| }, { |
| .codec = HANTRO_HEVC_DECODER, |
| .cfg = { |
| .id = V4L2_CID_MPEG_VIDEO_HEVC_PROFILE, |
| .min = V4L2_MPEG_VIDEO_HEVC_PROFILE_MAIN, |
| .max = V4L2_MPEG_VIDEO_HEVC_PROFILE_MAIN_10, |
| .def = V4L2_MPEG_VIDEO_HEVC_PROFILE_MAIN, |
| }, |
| }, { |
| .codec = HANTRO_HEVC_DECODER, |
| .cfg = { |
| .id = V4L2_CID_MPEG_VIDEO_HEVC_LEVEL, |
| .min = V4L2_MPEG_VIDEO_HEVC_LEVEL_1, |
| .max = V4L2_MPEG_VIDEO_HEVC_LEVEL_5_1, |
| }, |
| }, { |
| .codec = HANTRO_HEVC_DECODER, |
| .cfg = { |
| .id = V4L2_CID_STATELESS_HEVC_SPS, |
| .ops = &hantro_hevc_ctrl_ops, |
| }, |
| }, { |
| .codec = HANTRO_HEVC_DECODER, |
| .cfg = { |
| .id = V4L2_CID_STATELESS_HEVC_PPS, |
| }, |
| }, { |
| .codec = HANTRO_HEVC_DECODER, |
| .cfg = { |
| .id = V4L2_CID_STATELESS_HEVC_DECODE_PARAMS, |
| }, |
| }, { |
| .codec = HANTRO_HEVC_DECODER, |
| .cfg = { |
| .id = V4L2_CID_STATELESS_HEVC_SCALING_MATRIX, |
| }, |
| }, { |
| .codec = HANTRO_VP9_DECODER, |
| .cfg = { |
| .id = V4L2_CID_STATELESS_VP9_FRAME, |
| .ops = &hantro_vp9_ctrl_ops, |
| }, |
| }, { |
| .codec = HANTRO_VP9_DECODER, |
| .cfg = { |
| .id = V4L2_CID_STATELESS_VP9_COMPRESSED_HDR, |
| }, |
| }, { |
| .codec = HANTRO_AV1_DECODER, |
| .cfg = { |
| .id = V4L2_CID_STATELESS_AV1_FRAME, |
| }, |
| }, { |
| .codec = HANTRO_AV1_DECODER, |
| .cfg = { |
| .id = V4L2_CID_STATELESS_AV1_TILE_GROUP_ENTRY, |
| .dims = { V4L2_AV1_MAX_TILE_COUNT }, |
| }, |
| }, { |
| .codec = HANTRO_AV1_DECODER, |
| .cfg = { |
| .id = V4L2_CID_STATELESS_AV1_SEQUENCE, |
| .ops = &hantro_av1_ctrl_ops, |
| }, |
| }, { |
| .codec = HANTRO_AV1_DECODER, |
| .cfg = { |
| .id = V4L2_CID_STATELESS_AV1_FILM_GRAIN, |
| }, |
| }, |
| }; |
| |
| static int hantro_ctrls_setup(struct hantro_dev *vpu, |
| struct hantro_ctx *ctx, |
| int allowed_codecs) |
| { |
| int i, num_ctrls = ARRAY_SIZE(controls); |
| |
| v4l2_ctrl_handler_init(&ctx->ctrl_handler, num_ctrls); |
| |
| for (i = 0; i < num_ctrls; i++) { |
| if (!(allowed_codecs & controls[i].codec)) |
| continue; |
| |
| v4l2_ctrl_new_custom(&ctx->ctrl_handler, |
| &controls[i].cfg, NULL); |
| if (ctx->ctrl_handler.error) { |
| vpu_err("Adding control (%d) failed %d\n", |
| controls[i].cfg.id, |
| ctx->ctrl_handler.error); |
| v4l2_ctrl_handler_free(&ctx->ctrl_handler); |
| return ctx->ctrl_handler.error; |
| } |
| } |
| return v4l2_ctrl_handler_setup(&ctx->ctrl_handler); |
| } |
| |
| /* |
| * V4L2 file operations. |
| */ |
| |
| static int hantro_open(struct file *filp) |
| { |
| struct hantro_dev *vpu = video_drvdata(filp); |
| struct video_device *vdev = video_devdata(filp); |
| struct hantro_func *func = hantro_vdev_to_func(vdev); |
| struct hantro_ctx *ctx; |
| int allowed_codecs, ret; |
| |
| /* |
| * We do not need any extra locking here, because we operate only |
| * on local data here, except reading few fields from dev, which |
| * do not change through device's lifetime (which is guaranteed by |
| * reference on module from open()) and V4L2 internal objects (such |
| * as vdev and ctx->fh), which have proper locking done in respective |
| * helper functions used here. |
| */ |
| |
| ctx = kzalloc(sizeof(*ctx), GFP_KERNEL); |
| if (!ctx) |
| return -ENOMEM; |
| |
| ctx->dev = vpu; |
| if (func->id == MEDIA_ENT_F_PROC_VIDEO_ENCODER) { |
| allowed_codecs = vpu->variant->codec & HANTRO_ENCODERS; |
| ctx->is_encoder = true; |
| } else if (func->id == MEDIA_ENT_F_PROC_VIDEO_DECODER) { |
| allowed_codecs = vpu->variant->codec & HANTRO_DECODERS; |
| ctx->is_encoder = false; |
| } else { |
| ret = -ENODEV; |
| goto err_ctx_free; |
| } |
| |
| ctx->fh.m2m_ctx = v4l2_m2m_ctx_init(vpu->m2m_dev, ctx, queue_init); |
| if (IS_ERR(ctx->fh.m2m_ctx)) { |
| ret = PTR_ERR(ctx->fh.m2m_ctx); |
| goto err_ctx_free; |
| } |
| |
| v4l2_fh_init(&ctx->fh, vdev); |
| filp->private_data = &ctx->fh; |
| v4l2_fh_add(&ctx->fh); |
| |
| hantro_reset_fmts(ctx); |
| |
| ret = hantro_ctrls_setup(vpu, ctx, allowed_codecs); |
| if (ret) { |
| vpu_err("Failed to set up controls\n"); |
| goto err_fh_free; |
| } |
| ctx->fh.ctrl_handler = &ctx->ctrl_handler; |
| |
| return 0; |
| |
| err_fh_free: |
| v4l2_fh_del(&ctx->fh); |
| v4l2_fh_exit(&ctx->fh); |
| err_ctx_free: |
| kfree(ctx); |
| return ret; |
| } |
| |
| static int hantro_release(struct file *filp) |
| { |
| struct hantro_ctx *ctx = |
| container_of(filp->private_data, struct hantro_ctx, fh); |
| |
| /* |
| * No need for extra locking because this was the last reference |
| * to this file. |
| */ |
| v4l2_m2m_ctx_release(ctx->fh.m2m_ctx); |
| v4l2_fh_del(&ctx->fh); |
| v4l2_fh_exit(&ctx->fh); |
| v4l2_ctrl_handler_free(&ctx->ctrl_handler); |
| kfree(ctx); |
| |
| return 0; |
| } |
| |
| static const struct v4l2_file_operations hantro_fops = { |
| .owner = THIS_MODULE, |
| .open = hantro_open, |
| .release = hantro_release, |
| .poll = v4l2_m2m_fop_poll, |
| .unlocked_ioctl = video_ioctl2, |
| .mmap = v4l2_m2m_fop_mmap, |
| }; |
| |
| static const struct of_device_id of_hantro_match[] = { |
| #ifdef CONFIG_VIDEO_HANTRO_ROCKCHIP |
| { .compatible = "rockchip,px30-vpu", .data = &px30_vpu_variant, }, |
| { .compatible = "rockchip,rk3036-vpu", .data = &rk3036_vpu_variant, }, |
| { .compatible = "rockchip,rk3066-vpu", .data = &rk3066_vpu_variant, }, |
| { .compatible = "rockchip,rk3288-vpu", .data = &rk3288_vpu_variant, }, |
| { .compatible = "rockchip,rk3328-vpu", .data = &rk3328_vpu_variant, }, |
| { .compatible = "rockchip,rk3399-vpu", .data = &rk3399_vpu_variant, }, |
| { .compatible = "rockchip,rk3568-vepu", .data = &rk3568_vepu_variant, }, |
| { .compatible = "rockchip,rk3568-vpu", .data = &rk3568_vpu_variant, }, |
| { .compatible = "rockchip,rk3588-vepu121", .data = &rk3568_vepu_variant, }, |
| { .compatible = "rockchip,rk3588-av1-vpu", .data = &rk3588_vpu981_variant, }, |
| #endif |
| #ifdef CONFIG_VIDEO_HANTRO_IMX8M |
| { .compatible = "nxp,imx8mm-vpu-g1", .data = &imx8mm_vpu_g1_variant, }, |
| { .compatible = "nxp,imx8mq-vpu", .data = &imx8mq_vpu_variant, }, |
| { .compatible = "nxp,imx8mq-vpu-g1", .data = &imx8mq_vpu_g1_variant }, |
| { .compatible = "nxp,imx8mq-vpu-g2", .data = &imx8mq_vpu_g2_variant }, |
| #endif |
| #ifdef CONFIG_VIDEO_HANTRO_SAMA5D4 |
| { .compatible = "microchip,sama5d4-vdec", .data = &sama5d4_vdec_variant, }, |
| #endif |
| #ifdef CONFIG_VIDEO_HANTRO_SUNXI |
| { .compatible = "allwinner,sun50i-h6-vpu-g2", .data = &sunxi_vpu_variant, }, |
| #endif |
| #ifdef CONFIG_VIDEO_HANTRO_STM32MP25 |
| { .compatible = "st,stm32mp25-vdec", .data = &stm32mp25_vdec_variant, }, |
| { .compatible = "st,stm32mp25-venc", .data = &stm32mp25_venc_variant, }, |
| #endif |
| { /* sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(of, of_hantro_match); |
| |
| static int hantro_register_entity(struct media_device *mdev, |
| struct media_entity *entity, |
| const char *entity_name, |
| struct media_pad *pads, int num_pads, |
| int function, struct video_device *vdev) |
| { |
| char *name; |
| int ret; |
| |
| entity->obj_type = MEDIA_ENTITY_TYPE_BASE; |
| if (function == MEDIA_ENT_F_IO_V4L) { |
| entity->info.dev.major = VIDEO_MAJOR; |
| entity->info.dev.minor = vdev->minor; |
| } |
| |
| name = devm_kasprintf(mdev->dev, GFP_KERNEL, "%s-%s", vdev->name, |
| entity_name); |
| if (!name) |
| return -ENOMEM; |
| |
| entity->name = name; |
| entity->function = function; |
| |
| ret = media_entity_pads_init(entity, num_pads, pads); |
| if (ret) |
| return ret; |
| |
| ret = media_device_register_entity(mdev, entity); |
| if (ret) |
| return ret; |
| |
| return 0; |
| } |
| |
| static int hantro_attach_func(struct hantro_dev *vpu, |
| struct hantro_func *func) |
| { |
| struct media_device *mdev = &vpu->mdev; |
| struct media_link *link; |
| int ret; |
| |
| /* Create the three encoder entities with their pads */ |
| func->source_pad.flags = MEDIA_PAD_FL_SOURCE; |
| ret = hantro_register_entity(mdev, &func->vdev.entity, "source", |
| &func->source_pad, 1, MEDIA_ENT_F_IO_V4L, |
| &func->vdev); |
| if (ret) |
| return ret; |
| |
| func->proc_pads[0].flags = MEDIA_PAD_FL_SINK; |
| func->proc_pads[1].flags = MEDIA_PAD_FL_SOURCE; |
| ret = hantro_register_entity(mdev, &func->proc, "proc", |
| func->proc_pads, 2, func->id, |
| &func->vdev); |
| if (ret) |
| goto err_rel_entity0; |
| |
| func->sink_pad.flags = MEDIA_PAD_FL_SINK; |
| ret = hantro_register_entity(mdev, &func->sink, "sink", |
| &func->sink_pad, 1, MEDIA_ENT_F_IO_V4L, |
| &func->vdev); |
| if (ret) |
| goto err_rel_entity1; |
| |
| /* Connect the three entities */ |
| ret = media_create_pad_link(&func->vdev.entity, 0, &func->proc, 0, |
| MEDIA_LNK_FL_IMMUTABLE | |
| MEDIA_LNK_FL_ENABLED); |
| if (ret) |
| goto err_rel_entity2; |
| |
| ret = media_create_pad_link(&func->proc, 1, &func->sink, 0, |
| MEDIA_LNK_FL_IMMUTABLE | |
| MEDIA_LNK_FL_ENABLED); |
| if (ret) |
| goto err_rm_links0; |
| |
| /* Create video interface */ |
| func->intf_devnode = media_devnode_create(mdev, MEDIA_INTF_T_V4L_VIDEO, |
| 0, VIDEO_MAJOR, |
| func->vdev.minor); |
| if (!func->intf_devnode) { |
| ret = -ENOMEM; |
| goto err_rm_links1; |
| } |
| |
| /* Connect the two DMA engines to the interface */ |
| link = media_create_intf_link(&func->vdev.entity, |
| &func->intf_devnode->intf, |
| MEDIA_LNK_FL_IMMUTABLE | |
| MEDIA_LNK_FL_ENABLED); |
| if (!link) { |
| ret = -ENOMEM; |
| goto err_rm_devnode; |
| } |
| |
| link = media_create_intf_link(&func->sink, &func->intf_devnode->intf, |
| MEDIA_LNK_FL_IMMUTABLE | |
| MEDIA_LNK_FL_ENABLED); |
| if (!link) { |
| ret = -ENOMEM; |
| goto err_rm_devnode; |
| } |
| return 0; |
| |
| err_rm_devnode: |
| media_devnode_remove(func->intf_devnode); |
| |
| err_rm_links1: |
| media_entity_remove_links(&func->sink); |
| |
| err_rm_links0: |
| media_entity_remove_links(&func->proc); |
| media_entity_remove_links(&func->vdev.entity); |
| |
| err_rel_entity2: |
| media_device_unregister_entity(&func->sink); |
| |
| err_rel_entity1: |
| media_device_unregister_entity(&func->proc); |
| |
| err_rel_entity0: |
| media_device_unregister_entity(&func->vdev.entity); |
| return ret; |
| } |
| |
| static void hantro_detach_func(struct hantro_func *func) |
| { |
| media_devnode_remove(func->intf_devnode); |
| media_entity_remove_links(&func->sink); |
| media_entity_remove_links(&func->proc); |
| media_entity_remove_links(&func->vdev.entity); |
| media_device_unregister_entity(&func->sink); |
| media_device_unregister_entity(&func->proc); |
| media_device_unregister_entity(&func->vdev.entity); |
| } |
| |
| static int hantro_add_func(struct hantro_dev *vpu, unsigned int funcid) |
| { |
| const struct of_device_id *match; |
| struct hantro_func *func; |
| struct video_device *vfd; |
| int ret; |
| |
| match = of_match_node(of_hantro_match, vpu->dev->of_node); |
| func = devm_kzalloc(vpu->dev, sizeof(*func), GFP_KERNEL); |
| if (!func) { |
| v4l2_err(&vpu->v4l2_dev, "Failed to allocate video device\n"); |
| return -ENOMEM; |
| } |
| |
| func->id = funcid; |
| |
| vfd = &func->vdev; |
| vfd->fops = &hantro_fops; |
| vfd->release = video_device_release_empty; |
| vfd->lock = &vpu->vpu_mutex; |
| vfd->v4l2_dev = &vpu->v4l2_dev; |
| vfd->vfl_dir = VFL_DIR_M2M; |
| vfd->device_caps = V4L2_CAP_STREAMING | V4L2_CAP_VIDEO_M2M_MPLANE; |
| vfd->ioctl_ops = &hantro_ioctl_ops; |
| strscpy(vfd->name, match->compatible, sizeof(vfd->name)); |
| strlcat(vfd->name, funcid == MEDIA_ENT_F_PROC_VIDEO_ENCODER ? |
| "-enc" : "-dec", sizeof(vfd->name)); |
| |
| if (funcid == MEDIA_ENT_F_PROC_VIDEO_ENCODER) { |
| vpu->encoder = func; |
| v4l2_disable_ioctl(vfd, VIDIOC_TRY_DECODER_CMD); |
| v4l2_disable_ioctl(vfd, VIDIOC_DECODER_CMD); |
| } else { |
| vpu->decoder = func; |
| v4l2_disable_ioctl(vfd, VIDIOC_TRY_ENCODER_CMD); |
| v4l2_disable_ioctl(vfd, VIDIOC_ENCODER_CMD); |
| } |
| |
| video_set_drvdata(vfd, vpu); |
| |
| ret = video_register_device(vfd, VFL_TYPE_VIDEO, -1); |
| if (ret) { |
| v4l2_err(&vpu->v4l2_dev, "Failed to register video device\n"); |
| return ret; |
| } |
| |
| ret = hantro_attach_func(vpu, func); |
| if (ret) { |
| v4l2_err(&vpu->v4l2_dev, |
| "Failed to attach functionality to the media device\n"); |
| goto err_unreg_dev; |
| } |
| |
| v4l2_info(&vpu->v4l2_dev, "registered %s as /dev/video%d\n", vfd->name, |
| vfd->num); |
| |
| return 0; |
| |
| err_unreg_dev: |
| video_unregister_device(vfd); |
| return ret; |
| } |
| |
| static int hantro_add_enc_func(struct hantro_dev *vpu) |
| { |
| if (!vpu->variant->enc_fmts) |
| return 0; |
| |
| return hantro_add_func(vpu, MEDIA_ENT_F_PROC_VIDEO_ENCODER); |
| } |
| |
| static int hantro_add_dec_func(struct hantro_dev *vpu) |
| { |
| if (!vpu->variant->dec_fmts) |
| return 0; |
| |
| return hantro_add_func(vpu, MEDIA_ENT_F_PROC_VIDEO_DECODER); |
| } |
| |
| static void hantro_remove_func(struct hantro_dev *vpu, |
| unsigned int funcid) |
| { |
| struct hantro_func *func; |
| |
| if (funcid == MEDIA_ENT_F_PROC_VIDEO_ENCODER) |
| func = vpu->encoder; |
| else |
| func = vpu->decoder; |
| |
| if (!func) |
| return; |
| |
| hantro_detach_func(func); |
| video_unregister_device(&func->vdev); |
| } |
| |
| static void hantro_remove_enc_func(struct hantro_dev *vpu) |
| { |
| hantro_remove_func(vpu, MEDIA_ENT_F_PROC_VIDEO_ENCODER); |
| } |
| |
| static void hantro_remove_dec_func(struct hantro_dev *vpu) |
| { |
| hantro_remove_func(vpu, MEDIA_ENT_F_PROC_VIDEO_DECODER); |
| } |
| |
| static const struct media_device_ops hantro_m2m_media_ops = { |
| .req_validate = vb2_request_validate, |
| .req_queue = v4l2_m2m_request_queue, |
| }; |
| |
| /* |
| * Some SoCs, like RK3588 have multiple identical Hantro cores, but the |
| * kernel is currently missing support for multi-core handling. Exposing |
| * separate devices for each core to userspace is bad, since that does |
| * not allow scheduling tasks properly (and creates ABI). With this workaround |
| * the driver will only probe for the first core and early exit for the other |
| * cores. Once the driver gains multi-core support, the same technique |
| * for detecting the main core can be used to cluster all cores together. |
| */ |
| static int hantro_disable_multicore(struct hantro_dev *vpu) |
| { |
| struct device_node *node = NULL; |
| const char *compatible; |
| bool is_main_core; |
| int ret; |
| |
| /* Intentionally ignores the fallback strings */ |
| ret = of_property_read_string(vpu->dev->of_node, "compatible", &compatible); |
| if (ret) |
| return ret; |
| |
| /* The first compatible and available node found is considered the main core */ |
| do { |
| node = of_find_compatible_node(node, NULL, compatible); |
| if (of_device_is_available(node)) |
| break; |
| } while (node); |
| |
| if (!node) |
| return -EINVAL; |
| |
| is_main_core = (vpu->dev->of_node == node); |
| |
| of_node_put(node); |
| |
| if (!is_main_core) { |
| dev_info(vpu->dev, "missing multi-core support, ignoring this instance\n"); |
| return -ENODEV; |
| } |
| |
| return 0; |
| } |
| |
| static int hantro_probe(struct platform_device *pdev) |
| { |
| const struct of_device_id *match; |
| struct hantro_dev *vpu; |
| int num_bases; |
| int i, ret; |
| |
| vpu = devm_kzalloc(&pdev->dev, sizeof(*vpu), GFP_KERNEL); |
| if (!vpu) |
| return -ENOMEM; |
| |
| vpu->dev = &pdev->dev; |
| vpu->pdev = pdev; |
| mutex_init(&vpu->vpu_mutex); |
| spin_lock_init(&vpu->irqlock); |
| |
| match = of_match_node(of_hantro_match, pdev->dev.of_node); |
| vpu->variant = match->data; |
| |
| ret = hantro_disable_multicore(vpu); |
| if (ret) |
| return ret; |
| |
| /* |
| * Support for nxp,imx8mq-vpu is kept for backwards compatibility |
| * but it's deprecated. Please update your DTS file to use |
| * nxp,imx8mq-vpu-g1 or nxp,imx8mq-vpu-g2 instead. |
| */ |
| if (of_device_is_compatible(pdev->dev.of_node, "nxp,imx8mq-vpu")) |
| dev_warn(&pdev->dev, "%s compatible is deprecated\n", |
| match->compatible); |
| |
| INIT_DELAYED_WORK(&vpu->watchdog_work, hantro_watchdog); |
| |
| vpu->clocks = devm_kcalloc(&pdev->dev, vpu->variant->num_clocks, |
| sizeof(*vpu->clocks), GFP_KERNEL); |
| if (!vpu->clocks) |
| return -ENOMEM; |
| |
| if (vpu->variant->num_clocks > 1) { |
| for (i = 0; i < vpu->variant->num_clocks; i++) |
| vpu->clocks[i].id = vpu->variant->clk_names[i]; |
| |
| ret = devm_clk_bulk_get(&pdev->dev, vpu->variant->num_clocks, |
| vpu->clocks); |
| if (ret) |
| return ret; |
| } else { |
| /* |
| * If the driver has a single clk, chances are there will be no |
| * actual name in the DT bindings. |
| */ |
| vpu->clocks[0].clk = devm_clk_get(&pdev->dev, NULL); |
| if (IS_ERR(vpu->clocks[0].clk)) |
| return PTR_ERR(vpu->clocks[0].clk); |
| } |
| |
| vpu->resets = devm_reset_control_array_get_optional_exclusive(&pdev->dev); |
| if (IS_ERR(vpu->resets)) |
| return PTR_ERR(vpu->resets); |
| |
| num_bases = vpu->variant->num_regs ?: 1; |
| vpu->reg_bases = devm_kcalloc(&pdev->dev, num_bases, |
| sizeof(*vpu->reg_bases), GFP_KERNEL); |
| if (!vpu->reg_bases) |
| return -ENOMEM; |
| |
| for (i = 0; i < num_bases; i++) { |
| vpu->reg_bases[i] = vpu->variant->reg_names ? |
| devm_platform_ioremap_resource_byname(pdev, vpu->variant->reg_names[i]) : |
| devm_platform_ioremap_resource(pdev, 0); |
| if (IS_ERR(vpu->reg_bases[i])) |
| return PTR_ERR(vpu->reg_bases[i]); |
| } |
| vpu->enc_base = vpu->reg_bases[0] + vpu->variant->enc_offset; |
| vpu->dec_base = vpu->reg_bases[0] + vpu->variant->dec_offset; |
| |
| /** |
| * TODO: Eventually allow taking advantage of full 64-bit address space. |
| * Until then we assume the MSB portion of buffers' base addresses is |
| * always 0 due to this masking operation. |
| */ |
| ret = dma_set_coherent_mask(vpu->dev, DMA_BIT_MASK(32)); |
| if (ret) { |
| dev_err(vpu->dev, "Could not set DMA coherent mask.\n"); |
| return ret; |
| } |
| vb2_dma_contig_set_max_seg_size(&pdev->dev, DMA_BIT_MASK(32)); |
| |
| for (i = 0; i < vpu->variant->num_irqs; i++) { |
| const char *irq_name; |
| int irq; |
| |
| if (!vpu->variant->irqs[i].handler) |
| continue; |
| |
| if (vpu->variant->num_irqs > 1) { |
| irq_name = vpu->variant->irqs[i].name; |
| irq = platform_get_irq_byname(vpu->pdev, irq_name); |
| } else { |
| /* |
| * If the driver has a single IRQ, chances are there |
| * will be no actual name in the DT bindings. |
| */ |
| irq_name = "default"; |
| irq = platform_get_irq(vpu->pdev, 0); |
| } |
| if (irq < 0) |
| return irq; |
| |
| ret = devm_request_irq(vpu->dev, irq, |
| vpu->variant->irqs[i].handler, 0, |
| dev_name(vpu->dev), vpu); |
| if (ret) { |
| dev_err(vpu->dev, "Could not request %s IRQ.\n", |
| irq_name); |
| return ret; |
| } |
| } |
| |
| if (vpu->variant->init) { |
| ret = vpu->variant->init(vpu); |
| if (ret) { |
| dev_err(&pdev->dev, "Failed to init VPU hardware\n"); |
| return ret; |
| } |
| } |
| |
| pm_runtime_set_autosuspend_delay(vpu->dev, 100); |
| pm_runtime_use_autosuspend(vpu->dev); |
| pm_runtime_enable(vpu->dev); |
| |
| ret = reset_control_deassert(vpu->resets); |
| if (ret) { |
| dev_err(&pdev->dev, "Failed to deassert resets\n"); |
| goto err_pm_disable; |
| } |
| |
| ret = clk_bulk_prepare(vpu->variant->num_clocks, vpu->clocks); |
| if (ret) { |
| dev_err(&pdev->dev, "Failed to prepare clocks\n"); |
| goto err_rst_assert; |
| } |
| |
| ret = v4l2_device_register(&pdev->dev, &vpu->v4l2_dev); |
| if (ret) { |
| dev_err(&pdev->dev, "Failed to register v4l2 device\n"); |
| goto err_clk_unprepare; |
| } |
| platform_set_drvdata(pdev, vpu); |
| |
| vpu->m2m_dev = v4l2_m2m_init(&vpu_m2m_ops); |
| if (IS_ERR(vpu->m2m_dev)) { |
| v4l2_err(&vpu->v4l2_dev, "Failed to init mem2mem device\n"); |
| ret = PTR_ERR(vpu->m2m_dev); |
| goto err_v4l2_unreg; |
| } |
| |
| vpu->mdev.dev = vpu->dev; |
| strscpy(vpu->mdev.model, DRIVER_NAME, sizeof(vpu->mdev.model)); |
| media_device_init(&vpu->mdev); |
| vpu->mdev.ops = &hantro_m2m_media_ops; |
| vpu->v4l2_dev.mdev = &vpu->mdev; |
| |
| ret = hantro_add_enc_func(vpu); |
| if (ret) { |
| dev_err(&pdev->dev, "Failed to register encoder\n"); |
| goto err_m2m_rel; |
| } |
| |
| ret = hantro_add_dec_func(vpu); |
| if (ret) { |
| dev_err(&pdev->dev, "Failed to register decoder\n"); |
| goto err_rm_enc_func; |
| } |
| |
| ret = media_device_register(&vpu->mdev); |
| if (ret) { |
| v4l2_err(&vpu->v4l2_dev, "Failed to register mem2mem media device\n"); |
| goto err_rm_dec_func; |
| } |
| |
| return 0; |
| |
| err_rm_dec_func: |
| hantro_remove_dec_func(vpu); |
| err_rm_enc_func: |
| hantro_remove_enc_func(vpu); |
| err_m2m_rel: |
| media_device_cleanup(&vpu->mdev); |
| v4l2_m2m_release(vpu->m2m_dev); |
| err_v4l2_unreg: |
| v4l2_device_unregister(&vpu->v4l2_dev); |
| err_clk_unprepare: |
| clk_bulk_unprepare(vpu->variant->num_clocks, vpu->clocks); |
| err_rst_assert: |
| reset_control_assert(vpu->resets); |
| err_pm_disable: |
| pm_runtime_dont_use_autosuspend(vpu->dev); |
| pm_runtime_disable(vpu->dev); |
| return ret; |
| } |
| |
| static void hantro_remove(struct platform_device *pdev) |
| { |
| struct hantro_dev *vpu = platform_get_drvdata(pdev); |
| |
| v4l2_info(&vpu->v4l2_dev, "Removing %s\n", pdev->name); |
| |
| media_device_unregister(&vpu->mdev); |
| hantro_remove_dec_func(vpu); |
| hantro_remove_enc_func(vpu); |
| media_device_cleanup(&vpu->mdev); |
| v4l2_m2m_release(vpu->m2m_dev); |
| v4l2_device_unregister(&vpu->v4l2_dev); |
| clk_bulk_unprepare(vpu->variant->num_clocks, vpu->clocks); |
| reset_control_assert(vpu->resets); |
| pm_runtime_dont_use_autosuspend(vpu->dev); |
| pm_runtime_disable(vpu->dev); |
| } |
| |
| #ifdef CONFIG_PM |
| static int hantro_runtime_resume(struct device *dev) |
| { |
| struct hantro_dev *vpu = dev_get_drvdata(dev); |
| |
| if (vpu->variant->runtime_resume) |
| return vpu->variant->runtime_resume(vpu); |
| |
| return 0; |
| } |
| #endif |
| |
| static const struct dev_pm_ops hantro_pm_ops = { |
| SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, |
| pm_runtime_force_resume) |
| SET_RUNTIME_PM_OPS(NULL, hantro_runtime_resume, NULL) |
| }; |
| |
| static struct platform_driver hantro_driver = { |
| .probe = hantro_probe, |
| .remove_new = hantro_remove, |
| .driver = { |
| .name = DRIVER_NAME, |
| .of_match_table = of_hantro_match, |
| .pm = &hantro_pm_ops, |
| }, |
| }; |
| module_platform_driver(hantro_driver); |
| |
| MODULE_LICENSE("GPL v2"); |
| MODULE_AUTHOR("Alpha Lin <Alpha.Lin@Rock-Chips.com>"); |
| MODULE_AUTHOR("Tomasz Figa <tfiga@chromium.org>"); |
| MODULE_AUTHOR("Ezequiel Garcia <ezequiel@collabora.com>"); |
| MODULE_DESCRIPTION("Hantro VPU codec driver"); |