| // SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0-or-later |
| /* |
| * Copyright 2008 - 2015 Freescale Semiconductor Inc. |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/io.h> |
| #include <linux/platform_device.h> |
| #include <linux/slab.h> |
| #include <linux/module.h> |
| #include <linux/interrupt.h> |
| #include <linux/of_platform.h> |
| #include <linux/of_address.h> |
| #include <linux/delay.h> |
| #include <linux/libfdt_env.h> |
| |
| #include "fman.h" |
| #include "fman_port.h" |
| #include "fman_sp.h" |
| #include "fman_keygen.h" |
| |
| /* Queue ID */ |
| #define DFLT_FQ_ID 0x00FFFFFF |
| |
| /* General defines */ |
| #define PORT_BMI_FIFO_UNITS 0x100 |
| |
| #define MAX_PORT_FIFO_SIZE(bmi_max_fifo_size) \ |
| min((u32)bmi_max_fifo_size, (u32)1024 * FMAN_BMI_FIFO_UNITS) |
| |
| #define PORT_CG_MAP_NUM 8 |
| #define PORT_PRS_RESULT_WORDS_NUM 8 |
| #define PORT_IC_OFFSET_UNITS 0x10 |
| |
| #define MIN_EXT_BUF_SIZE 64 |
| |
| #define BMI_PORT_REGS_OFFSET 0 |
| #define QMI_PORT_REGS_OFFSET 0x400 |
| #define HWP_PORT_REGS_OFFSET 0x800 |
| |
| /* Default values */ |
| #define DFLT_PORT_BUFFER_PREFIX_CONTEXT_DATA_ALIGN \ |
| DFLT_FM_SP_BUFFER_PREFIX_CONTEXT_DATA_ALIGN |
| |
| #define DFLT_PORT_CUT_BYTES_FROM_END 4 |
| |
| #define DFLT_PORT_ERRORS_TO_DISCARD FM_PORT_FRM_ERR_CLS_DISCARD |
| #define DFLT_PORT_MAX_FRAME_LENGTH 9600 |
| |
| #define DFLT_PORT_RX_FIFO_PRI_ELEVATION_LEV(bmi_max_fifo_size) \ |
| MAX_PORT_FIFO_SIZE(bmi_max_fifo_size) |
| |
| #define DFLT_PORT_RX_FIFO_THRESHOLD(major, bmi_max_fifo_size) \ |
| (major == 6 ? \ |
| MAX_PORT_FIFO_SIZE(bmi_max_fifo_size) : \ |
| (MAX_PORT_FIFO_SIZE(bmi_max_fifo_size) * 3 / 4)) \ |
| |
| #define DFLT_PORT_EXTRA_NUM_OF_FIFO_BUFS 0 |
| |
| /* QMI defines */ |
| #define QMI_DEQ_CFG_SUBPORTAL_MASK 0x1f |
| |
| #define QMI_PORT_CFG_EN 0x80000000 |
| #define QMI_PORT_STATUS_DEQ_FD_BSY 0x20000000 |
| |
| #define QMI_DEQ_CFG_PRI 0x80000000 |
| #define QMI_DEQ_CFG_TYPE1 0x10000000 |
| #define QMI_DEQ_CFG_TYPE2 0x20000000 |
| #define QMI_DEQ_CFG_TYPE3 0x30000000 |
| #define QMI_DEQ_CFG_PREFETCH_PARTIAL 0x01000000 |
| #define QMI_DEQ_CFG_PREFETCH_FULL 0x03000000 |
| #define QMI_DEQ_CFG_SP_MASK 0xf |
| #define QMI_DEQ_CFG_SP_SHIFT 20 |
| |
| #define QMI_BYTE_COUNT_LEVEL_CONTROL(_type) \ |
| (_type == FMAN_PORT_TYPE_TX ? 0x1400 : 0x400) |
| |
| /* BMI defins */ |
| #define BMI_EBD_EN 0x80000000 |
| |
| #define BMI_PORT_CFG_EN 0x80000000 |
| |
| #define BMI_PORT_STATUS_BSY 0x80000000 |
| |
| #define BMI_DMA_ATTR_SWP_SHIFT FMAN_SP_DMA_ATTR_SWP_SHIFT |
| #define BMI_DMA_ATTR_WRITE_OPTIMIZE FMAN_SP_DMA_ATTR_WRITE_OPTIMIZE |
| |
| #define BMI_RX_FIFO_PRI_ELEVATION_SHIFT 16 |
| #define BMI_RX_FIFO_THRESHOLD_ETHE 0x80000000 |
| |
| #define BMI_FRAME_END_CS_IGNORE_SHIFT 24 |
| #define BMI_FRAME_END_CS_IGNORE_MASK 0x0000001f |
| |
| #define BMI_RX_FRAME_END_CUT_SHIFT 16 |
| #define BMI_RX_FRAME_END_CUT_MASK 0x0000001f |
| |
| #define BMI_IC_TO_EXT_SHIFT FMAN_SP_IC_TO_EXT_SHIFT |
| #define BMI_IC_TO_EXT_MASK 0x0000001f |
| #define BMI_IC_FROM_INT_SHIFT FMAN_SP_IC_FROM_INT_SHIFT |
| #define BMI_IC_FROM_INT_MASK 0x0000000f |
| #define BMI_IC_SIZE_MASK 0x0000001f |
| |
| #define BMI_INT_BUF_MARG_SHIFT 28 |
| #define BMI_INT_BUF_MARG_MASK 0x0000000f |
| #define BMI_EXT_BUF_MARG_START_SHIFT FMAN_SP_EXT_BUF_MARG_START_SHIFT |
| #define BMI_EXT_BUF_MARG_START_MASK 0x000001ff |
| #define BMI_EXT_BUF_MARG_END_MASK 0x000001ff |
| |
| #define BMI_CMD_MR_LEAC 0x00200000 |
| #define BMI_CMD_MR_SLEAC 0x00100000 |
| #define BMI_CMD_MR_MA 0x00080000 |
| #define BMI_CMD_MR_DEAS 0x00040000 |
| #define BMI_CMD_RX_MR_DEF (BMI_CMD_MR_LEAC | \ |
| BMI_CMD_MR_SLEAC | \ |
| BMI_CMD_MR_MA | \ |
| BMI_CMD_MR_DEAS) |
| #define BMI_CMD_TX_MR_DEF 0 |
| |
| #define BMI_CMD_ATTR_ORDER 0x80000000 |
| #define BMI_CMD_ATTR_SYNC 0x02000000 |
| #define BMI_CMD_ATTR_COLOR_SHIFT 26 |
| |
| #define BMI_FIFO_PIPELINE_DEPTH_SHIFT 12 |
| #define BMI_FIFO_PIPELINE_DEPTH_MASK 0x0000000f |
| #define BMI_NEXT_ENG_FD_BITS_SHIFT 24 |
| |
| #define BMI_EXT_BUF_POOL_VALID FMAN_SP_EXT_BUF_POOL_VALID |
| #define BMI_EXT_BUF_POOL_EN_COUNTER FMAN_SP_EXT_BUF_POOL_EN_COUNTER |
| #define BMI_EXT_BUF_POOL_BACKUP FMAN_SP_EXT_BUF_POOL_BACKUP |
| #define BMI_EXT_BUF_POOL_ID_SHIFT 16 |
| #define BMI_EXT_BUF_POOL_ID_MASK 0x003F0000 |
| #define BMI_POOL_DEP_NUM_OF_POOLS_SHIFT 16 |
| |
| #define BMI_TX_FIFO_MIN_FILL_SHIFT 16 |
| |
| #define BMI_PRIORITY_ELEVATION_LEVEL ((0x3FF + 1) * PORT_BMI_FIFO_UNITS) |
| #define BMI_FIFO_THRESHOLD ((0x3FF + 1) * PORT_BMI_FIFO_UNITS) |
| |
| #define BMI_DEQUEUE_PIPELINE_DEPTH(_type, _speed) \ |
| ((_type == FMAN_PORT_TYPE_TX && _speed == 10000) ? 4 : 1) |
| |
| #define RX_ERRS_TO_ENQ \ |
| (FM_PORT_FRM_ERR_DMA | \ |
| FM_PORT_FRM_ERR_PHYSICAL | \ |
| FM_PORT_FRM_ERR_SIZE | \ |
| FM_PORT_FRM_ERR_EXTRACTION | \ |
| FM_PORT_FRM_ERR_NO_SCHEME | \ |
| FM_PORT_FRM_ERR_PRS_TIMEOUT | \ |
| FM_PORT_FRM_ERR_PRS_ILL_INSTRUCT | \ |
| FM_PORT_FRM_ERR_BLOCK_LIMIT_EXCEEDED | \ |
| FM_PORT_FRM_ERR_PRS_HDR_ERR | \ |
| FM_PORT_FRM_ERR_KEYSIZE_OVERFLOW | \ |
| FM_PORT_FRM_ERR_IPRE) |
| |
| /* NIA defines */ |
| #define NIA_ORDER_RESTOR 0x00800000 |
| #define NIA_ENG_BMI 0x00500000 |
| #define NIA_ENG_QMI_ENQ 0x00540000 |
| #define NIA_ENG_QMI_DEQ 0x00580000 |
| #define NIA_ENG_HWP 0x00440000 |
| #define NIA_ENG_HWK 0x00480000 |
| #define NIA_BMI_AC_ENQ_FRAME 0x00000002 |
| #define NIA_BMI_AC_TX_RELEASE 0x000002C0 |
| #define NIA_BMI_AC_RELEASE 0x000000C0 |
| #define NIA_BMI_AC_TX 0x00000274 |
| #define NIA_BMI_AC_FETCH_ALL_FRAME 0x0000020c |
| |
| /* Port IDs */ |
| #define TX_10G_PORT_BASE 0x30 |
| #define RX_10G_PORT_BASE 0x10 |
| |
| /* BMI Rx port register map */ |
| struct fman_port_rx_bmi_regs { |
| u32 fmbm_rcfg; /* Rx Configuration */ |
| u32 fmbm_rst; /* Rx Status */ |
| u32 fmbm_rda; /* Rx DMA attributes */ |
| u32 fmbm_rfp; /* Rx FIFO Parameters */ |
| u32 fmbm_rfed; /* Rx Frame End Data */ |
| u32 fmbm_ricp; /* Rx Internal Context Parameters */ |
| u32 fmbm_rim; /* Rx Internal Buffer Margins */ |
| u32 fmbm_rebm; /* Rx External Buffer Margins */ |
| u32 fmbm_rfne; /* Rx Frame Next Engine */ |
| u32 fmbm_rfca; /* Rx Frame Command Attributes. */ |
| u32 fmbm_rfpne; /* Rx Frame Parser Next Engine */ |
| u32 fmbm_rpso; /* Rx Parse Start Offset */ |
| u32 fmbm_rpp; /* Rx Policer Profile */ |
| u32 fmbm_rccb; /* Rx Coarse Classification Base */ |
| u32 fmbm_reth; /* Rx Excessive Threshold */ |
| u32 reserved003c[1]; /* (0x03C 0x03F) */ |
| u32 fmbm_rprai[PORT_PRS_RESULT_WORDS_NUM]; |
| /* Rx Parse Results Array Init */ |
| u32 fmbm_rfqid; /* Rx Frame Queue ID */ |
| u32 fmbm_refqid; /* Rx Error Frame Queue ID */ |
| u32 fmbm_rfsdm; /* Rx Frame Status Discard Mask */ |
| u32 fmbm_rfsem; /* Rx Frame Status Error Mask */ |
| u32 fmbm_rfene; /* Rx Frame Enqueue Next Engine */ |
| u32 reserved0074[0x2]; /* (0x074-0x07C) */ |
| u32 fmbm_rcmne; /* Rx Frame Continuous Mode Next Engine */ |
| u32 reserved0080[0x20]; /* (0x080 0x0FF) */ |
| u32 fmbm_ebmpi[FMAN_PORT_MAX_EXT_POOLS_NUM]; |
| /* Buffer Manager pool Information- */ |
| u32 fmbm_acnt[FMAN_PORT_MAX_EXT_POOLS_NUM]; /* Allocate Counter- */ |
| u32 reserved0130[8]; /* 0x130/0x140 - 0x15F reserved - */ |
| u32 fmbm_rcgm[PORT_CG_MAP_NUM]; /* Congestion Group Map */ |
| u32 fmbm_mpd; /* BM Pool Depletion */ |
| u32 reserved0184[0x1F]; /* (0x184 0x1FF) */ |
| u32 fmbm_rstc; /* Rx Statistics Counters */ |
| u32 fmbm_rfrc; /* Rx Frame Counter */ |
| u32 fmbm_rfbc; /* Rx Bad Frames Counter */ |
| u32 fmbm_rlfc; /* Rx Large Frames Counter */ |
| u32 fmbm_rffc; /* Rx Filter Frames Counter */ |
| u32 fmbm_rfdc; /* Rx Frame Discard Counter */ |
| u32 fmbm_rfldec; /* Rx Frames List DMA Error Counter */ |
| u32 fmbm_rodc; /* Rx Out of Buffers Discard nntr */ |
| u32 fmbm_rbdc; /* Rx Buffers Deallocate Counter */ |
| u32 fmbm_rpec; /* RX Prepare to enqueue Counte */ |
| u32 reserved0224[0x16]; /* (0x224 0x27F) */ |
| u32 fmbm_rpc; /* Rx Performance Counters */ |
| u32 fmbm_rpcp; /* Rx Performance Count Parameters */ |
| u32 fmbm_rccn; /* Rx Cycle Counter */ |
| u32 fmbm_rtuc; /* Rx Tasks Utilization Counter */ |
| u32 fmbm_rrquc; /* Rx Receive Queue Utilization cntr */ |
| u32 fmbm_rduc; /* Rx DMA Utilization Counter */ |
| u32 fmbm_rfuc; /* Rx FIFO Utilization Counter */ |
| u32 fmbm_rpac; /* Rx Pause Activation Counter */ |
| u32 reserved02a0[0x18]; /* (0x2A0 0x2FF) */ |
| u32 fmbm_rdcfg[0x3]; /* Rx Debug Configuration */ |
| u32 fmbm_rgpr; /* Rx General Purpose Register */ |
| u32 reserved0310[0x3a]; |
| }; |
| |
| /* BMI Tx port register map */ |
| struct fman_port_tx_bmi_regs { |
| u32 fmbm_tcfg; /* Tx Configuration */ |
| u32 fmbm_tst; /* Tx Status */ |
| u32 fmbm_tda; /* Tx DMA attributes */ |
| u32 fmbm_tfp; /* Tx FIFO Parameters */ |
| u32 fmbm_tfed; /* Tx Frame End Data */ |
| u32 fmbm_ticp; /* Tx Internal Context Parameters */ |
| u32 fmbm_tfdne; /* Tx Frame Dequeue Next Engine. */ |
| u32 fmbm_tfca; /* Tx Frame Command attribute. */ |
| u32 fmbm_tcfqid; /* Tx Confirmation Frame Queue ID. */ |
| u32 fmbm_tefqid; /* Tx Frame Error Queue ID */ |
| u32 fmbm_tfene; /* Tx Frame Enqueue Next Engine */ |
| u32 fmbm_trlmts; /* Tx Rate Limiter Scale */ |
| u32 fmbm_trlmt; /* Tx Rate Limiter */ |
| u32 reserved0034[0x0e]; /* (0x034-0x6c) */ |
| u32 fmbm_tccb; /* Tx Coarse Classification base */ |
| u32 fmbm_tfne; /* Tx Frame Next Engine */ |
| u32 fmbm_tpfcm[0x02]; |
| /* Tx Priority based Flow Control (PFC) Mapping */ |
| u32 fmbm_tcmne; /* Tx Frame Continuous Mode Next Engine */ |
| u32 reserved0080[0x60]; /* (0x080-0x200) */ |
| u32 fmbm_tstc; /* Tx Statistics Counters */ |
| u32 fmbm_tfrc; /* Tx Frame Counter */ |
| u32 fmbm_tfdc; /* Tx Frames Discard Counter */ |
| u32 fmbm_tfledc; /* Tx Frame len error discard cntr */ |
| u32 fmbm_tfufdc; /* Tx Frame unsprt frmt discard cntr */ |
| u32 fmbm_tbdc; /* Tx Buffers Deallocate Counter */ |
| u32 reserved0218[0x1A]; /* (0x218-0x280) */ |
| u32 fmbm_tpc; /* Tx Performance Counters */ |
| u32 fmbm_tpcp; /* Tx Performance Count Parameters */ |
| u32 fmbm_tccn; /* Tx Cycle Counter */ |
| u32 fmbm_ttuc; /* Tx Tasks Utilization Counter */ |
| u32 fmbm_ttcquc; /* Tx Transmit conf Q util Counter */ |
| u32 fmbm_tduc; /* Tx DMA Utilization Counter */ |
| u32 fmbm_tfuc; /* Tx FIFO Utilization Counter */ |
| u32 reserved029c[16]; /* (0x29C-0x2FF) */ |
| u32 fmbm_tdcfg[0x3]; /* Tx Debug Configuration */ |
| u32 fmbm_tgpr; /* Tx General Purpose Register */ |
| u32 reserved0310[0x3a]; /* (0x310-0x3FF) */ |
| }; |
| |
| /* BMI port register map */ |
| union fman_port_bmi_regs { |
| struct fman_port_rx_bmi_regs rx; |
| struct fman_port_tx_bmi_regs tx; |
| }; |
| |
| /* QMI port register map */ |
| struct fman_port_qmi_regs { |
| u32 fmqm_pnc; /* PortID n Configuration Register */ |
| u32 fmqm_pns; /* PortID n Status Register */ |
| u32 fmqm_pnts; /* PortID n Task Status Register */ |
| u32 reserved00c[4]; /* 0xn00C - 0xn01B */ |
| u32 fmqm_pnen; /* PortID n Enqueue NIA Register */ |
| u32 fmqm_pnetfc; /* PortID n Enq Total Frame Counter */ |
| u32 reserved024[2]; /* 0xn024 - 0x02B */ |
| u32 fmqm_pndn; /* PortID n Dequeue NIA Register */ |
| u32 fmqm_pndc; /* PortID n Dequeue Config Register */ |
| u32 fmqm_pndtfc; /* PortID n Dequeue tot Frame cntr */ |
| u32 fmqm_pndfdc; /* PortID n Dequeue FQID Dflt Cntr */ |
| u32 fmqm_pndcc; /* PortID n Dequeue Confirm Counter */ |
| }; |
| |
| #define HWP_HXS_COUNT 16 |
| #define HWP_HXS_PHE_REPORT 0x00000800 |
| #define HWP_HXS_PCAC_PSTAT 0x00000100 |
| #define HWP_HXS_PCAC_PSTOP 0x00000001 |
| #define HWP_HXS_TCP_OFFSET 0xA |
| #define HWP_HXS_UDP_OFFSET 0xB |
| #define HWP_HXS_SH_PAD_REM 0x80000000 |
| |
| struct fman_port_hwp_regs { |
| struct { |
| u32 ssa; /* Soft Sequence Attachment */ |
| u32 lcv; /* Line-up Enable Confirmation Mask */ |
| } pmda[HWP_HXS_COUNT]; /* Parse Memory Direct Access Registers */ |
| u32 reserved080[(0x3f8 - 0x080) / 4]; /* (0x080-0x3f7) */ |
| u32 fmpr_pcac; /* Configuration Access Control */ |
| }; |
| |
| /* QMI dequeue prefetch modes */ |
| enum fman_port_deq_prefetch { |
| FMAN_PORT_DEQ_NO_PREFETCH, /* No prefetch mode */ |
| FMAN_PORT_DEQ_PART_PREFETCH, /* Partial prefetch mode */ |
| FMAN_PORT_DEQ_FULL_PREFETCH /* Full prefetch mode */ |
| }; |
| |
| /* A structure for defining FM port resources */ |
| struct fman_port_rsrc { |
| u32 num; /* Committed required resource */ |
| u32 extra; /* Extra (not committed) required resource */ |
| }; |
| |
| enum fman_port_dma_swap { |
| FMAN_PORT_DMA_NO_SWAP, /* No swap, transfer data as is */ |
| FMAN_PORT_DMA_SWAP_LE, |
| /* The transferred data should be swapped in PPC Little Endian mode */ |
| FMAN_PORT_DMA_SWAP_BE |
| /* The transferred data should be swapped in Big Endian mode */ |
| }; |
| |
| /* Default port color */ |
| enum fman_port_color { |
| FMAN_PORT_COLOR_GREEN, /* Default port color is green */ |
| FMAN_PORT_COLOR_YELLOW, /* Default port color is yellow */ |
| FMAN_PORT_COLOR_RED, /* Default port color is red */ |
| FMAN_PORT_COLOR_OVERRIDE /* Ignore color */ |
| }; |
| |
| /* QMI dequeue from the SP channel - types */ |
| enum fman_port_deq_type { |
| FMAN_PORT_DEQ_BY_PRI, |
| /* Priority precedence and Intra-Class scheduling */ |
| FMAN_PORT_DEQ_ACTIVE_FQ, |
| /* Active FQ precedence and Intra-Class scheduling */ |
| FMAN_PORT_DEQ_ACTIVE_FQ_NO_ICS |
| /* Active FQ precedence and override Intra-Class scheduling */ |
| }; |
| |
| /* External buffer pools configuration */ |
| struct fman_port_bpools { |
| u8 count; /* Num of pools to set up */ |
| bool counters_enable; /* Enable allocate counters */ |
| u8 grp_bp_depleted_num; |
| /* Number of depleted pools - if reached the BMI indicates |
| * the MAC to send a pause frame |
| */ |
| struct { |
| u8 bpid; /* BM pool ID */ |
| u16 size; |
| /* Pool's size - must be in ascending order */ |
| bool is_backup; |
| /* If this is a backup pool */ |
| bool grp_bp_depleted; |
| /* Consider this buffer in multiple pools depletion criteria */ |
| bool single_bp_depleted; |
| /* Consider this buffer in single pool depletion criteria */ |
| } bpool[FMAN_PORT_MAX_EXT_POOLS_NUM]; |
| }; |
| |
| struct fman_port_cfg { |
| u32 dflt_fqid; |
| u32 err_fqid; |
| u32 pcd_base_fqid; |
| u32 pcd_fqs_count; |
| u8 deq_sp; |
| bool deq_high_priority; |
| enum fman_port_deq_type deq_type; |
| enum fman_port_deq_prefetch deq_prefetch_option; |
| u16 deq_byte_cnt; |
| u8 cheksum_last_bytes_ignore; |
| u8 rx_cut_end_bytes; |
| struct fman_buf_pool_depletion buf_pool_depletion; |
| struct fman_ext_pools ext_buf_pools; |
| u32 tx_fifo_min_level; |
| u32 tx_fifo_low_comf_level; |
| u32 rx_pri_elevation; |
| u32 rx_fifo_thr; |
| struct fman_sp_buf_margins buf_margins; |
| u32 int_buf_start_margin; |
| struct fman_sp_int_context_data_copy int_context; |
| u32 discard_mask; |
| u32 err_mask; |
| struct fman_buffer_prefix_content buffer_prefix_content; |
| bool dont_release_buf; |
| |
| u8 rx_fd_bits; |
| u32 tx_fifo_deq_pipeline_depth; |
| bool errata_A006320; |
| bool excessive_threshold_register; |
| bool fmbm_tfne_has_features; |
| |
| enum fman_port_dma_swap dma_swap_data; |
| enum fman_port_color color; |
| }; |
| |
| struct fman_port_rx_pools_params { |
| u8 num_of_pools; |
| u16 largest_buf_size; |
| }; |
| |
| struct fman_port_dts_params { |
| void __iomem *base_addr; /* FMan port virtual memory */ |
| enum fman_port_type type; /* Port type */ |
| u16 speed; /* Port speed */ |
| u8 id; /* HW Port Id */ |
| u32 qman_channel_id; /* QMan channel id (non RX only) */ |
| struct fman *fman; /* FMan Handle */ |
| }; |
| |
| struct fman_port { |
| void *fm; |
| struct device *dev; |
| struct fman_rev_info rev_info; |
| u8 port_id; |
| enum fman_port_type port_type; |
| u16 port_speed; |
| |
| union fman_port_bmi_regs __iomem *bmi_regs; |
| struct fman_port_qmi_regs __iomem *qmi_regs; |
| struct fman_port_hwp_regs __iomem *hwp_regs; |
| |
| struct fman_sp_buffer_offsets buffer_offsets; |
| |
| u8 internal_buf_offset; |
| struct fman_ext_pools ext_buf_pools; |
| |
| u16 max_frame_length; |
| struct fman_port_rsrc open_dmas; |
| struct fman_port_rsrc tasks; |
| struct fman_port_rsrc fifo_bufs; |
| struct fman_port_rx_pools_params rx_pools_params; |
| |
| struct fman_port_cfg *cfg; |
| struct fman_port_dts_params dts_params; |
| |
| u8 ext_pools_num; |
| u32 max_port_fifo_size; |
| u32 max_num_of_ext_pools; |
| u32 max_num_of_sub_portals; |
| u32 bm_max_num_of_pools; |
| }; |
| |
| static int init_bmi_rx(struct fman_port *port) |
| { |
| struct fman_port_rx_bmi_regs __iomem *regs = &port->bmi_regs->rx; |
| struct fman_port_cfg *cfg = port->cfg; |
| u32 tmp; |
| |
| /* DMA attributes */ |
| tmp = (u32)cfg->dma_swap_data << BMI_DMA_ATTR_SWP_SHIFT; |
| /* Enable write optimization */ |
| tmp |= BMI_DMA_ATTR_WRITE_OPTIMIZE; |
| iowrite32be(tmp, ®s->fmbm_rda); |
| |
| /* Rx FIFO parameters */ |
| tmp = (cfg->rx_pri_elevation / PORT_BMI_FIFO_UNITS - 1) << |
| BMI_RX_FIFO_PRI_ELEVATION_SHIFT; |
| tmp |= cfg->rx_fifo_thr / PORT_BMI_FIFO_UNITS - 1; |
| iowrite32be(tmp, ®s->fmbm_rfp); |
| |
| if (cfg->excessive_threshold_register) |
| /* always allow access to the extra resources */ |
| iowrite32be(BMI_RX_FIFO_THRESHOLD_ETHE, ®s->fmbm_reth); |
| |
| /* Frame end data */ |
| tmp = (cfg->cheksum_last_bytes_ignore & BMI_FRAME_END_CS_IGNORE_MASK) << |
| BMI_FRAME_END_CS_IGNORE_SHIFT; |
| tmp |= (cfg->rx_cut_end_bytes & BMI_RX_FRAME_END_CUT_MASK) << |
| BMI_RX_FRAME_END_CUT_SHIFT; |
| if (cfg->errata_A006320) |
| tmp &= 0xffe0ffff; |
| iowrite32be(tmp, ®s->fmbm_rfed); |
| |
| /* Internal context parameters */ |
| tmp = ((cfg->int_context.ext_buf_offset / PORT_IC_OFFSET_UNITS) & |
| BMI_IC_TO_EXT_MASK) << BMI_IC_TO_EXT_SHIFT; |
| tmp |= ((cfg->int_context.int_context_offset / PORT_IC_OFFSET_UNITS) & |
| BMI_IC_FROM_INT_MASK) << BMI_IC_FROM_INT_SHIFT; |
| tmp |= (cfg->int_context.size / PORT_IC_OFFSET_UNITS) & |
| BMI_IC_SIZE_MASK; |
| iowrite32be(tmp, ®s->fmbm_ricp); |
| |
| /* Internal buffer offset */ |
| tmp = ((cfg->int_buf_start_margin / PORT_IC_OFFSET_UNITS) & |
| BMI_INT_BUF_MARG_MASK) << BMI_INT_BUF_MARG_SHIFT; |
| iowrite32be(tmp, ®s->fmbm_rim); |
| |
| /* External buffer margins */ |
| tmp = (cfg->buf_margins.start_margins & BMI_EXT_BUF_MARG_START_MASK) << |
| BMI_EXT_BUF_MARG_START_SHIFT; |
| tmp |= cfg->buf_margins.end_margins & BMI_EXT_BUF_MARG_END_MASK; |
| iowrite32be(tmp, ®s->fmbm_rebm); |
| |
| /* Frame attributes */ |
| tmp = BMI_CMD_RX_MR_DEF; |
| tmp |= BMI_CMD_ATTR_ORDER; |
| tmp |= (u32)cfg->color << BMI_CMD_ATTR_COLOR_SHIFT; |
| /* Synchronization request */ |
| tmp |= BMI_CMD_ATTR_SYNC; |
| |
| iowrite32be(tmp, ®s->fmbm_rfca); |
| |
| /* NIA */ |
| tmp = (u32)cfg->rx_fd_bits << BMI_NEXT_ENG_FD_BITS_SHIFT; |
| |
| tmp |= NIA_ENG_HWP; |
| iowrite32be(tmp, ®s->fmbm_rfne); |
| |
| /* Parser Next Engine NIA */ |
| iowrite32be(NIA_ENG_BMI | NIA_BMI_AC_ENQ_FRAME, ®s->fmbm_rfpne); |
| |
| /* Enqueue NIA */ |
| iowrite32be(NIA_ENG_QMI_ENQ | NIA_ORDER_RESTOR, ®s->fmbm_rfene); |
| |
| /* Default/error queues */ |
| iowrite32be((cfg->dflt_fqid & DFLT_FQ_ID), ®s->fmbm_rfqid); |
| iowrite32be((cfg->err_fqid & DFLT_FQ_ID), ®s->fmbm_refqid); |
| |
| /* Discard/error masks */ |
| iowrite32be(cfg->discard_mask, ®s->fmbm_rfsdm); |
| iowrite32be(cfg->err_mask, ®s->fmbm_rfsem); |
| |
| return 0; |
| } |
| |
| static int init_bmi_tx(struct fman_port *port) |
| { |
| struct fman_port_tx_bmi_regs __iomem *regs = &port->bmi_regs->tx; |
| struct fman_port_cfg *cfg = port->cfg; |
| u32 tmp; |
| |
| /* Tx Configuration register */ |
| tmp = 0; |
| iowrite32be(tmp, ®s->fmbm_tcfg); |
| |
| /* DMA attributes */ |
| tmp = (u32)cfg->dma_swap_data << BMI_DMA_ATTR_SWP_SHIFT; |
| iowrite32be(tmp, ®s->fmbm_tda); |
| |
| /* Tx FIFO parameters */ |
| tmp = (cfg->tx_fifo_min_level / PORT_BMI_FIFO_UNITS) << |
| BMI_TX_FIFO_MIN_FILL_SHIFT; |
| tmp |= ((cfg->tx_fifo_deq_pipeline_depth - 1) & |
| BMI_FIFO_PIPELINE_DEPTH_MASK) << BMI_FIFO_PIPELINE_DEPTH_SHIFT; |
| tmp |= (cfg->tx_fifo_low_comf_level / PORT_BMI_FIFO_UNITS) - 1; |
| iowrite32be(tmp, ®s->fmbm_tfp); |
| |
| /* Frame end data */ |
| tmp = (cfg->cheksum_last_bytes_ignore & BMI_FRAME_END_CS_IGNORE_MASK) << |
| BMI_FRAME_END_CS_IGNORE_SHIFT; |
| iowrite32be(tmp, ®s->fmbm_tfed); |
| |
| /* Internal context parameters */ |
| tmp = ((cfg->int_context.ext_buf_offset / PORT_IC_OFFSET_UNITS) & |
| BMI_IC_TO_EXT_MASK) << BMI_IC_TO_EXT_SHIFT; |
| tmp |= ((cfg->int_context.int_context_offset / PORT_IC_OFFSET_UNITS) & |
| BMI_IC_FROM_INT_MASK) << BMI_IC_FROM_INT_SHIFT; |
| tmp |= (cfg->int_context.size / PORT_IC_OFFSET_UNITS) & |
| BMI_IC_SIZE_MASK; |
| iowrite32be(tmp, ®s->fmbm_ticp); |
| |
| /* Frame attributes */ |
| tmp = BMI_CMD_TX_MR_DEF; |
| tmp |= BMI_CMD_ATTR_ORDER; |
| tmp |= (u32)cfg->color << BMI_CMD_ATTR_COLOR_SHIFT; |
| iowrite32be(tmp, ®s->fmbm_tfca); |
| |
| /* Dequeue NIA + enqueue NIA */ |
| iowrite32be(NIA_ENG_QMI_DEQ, ®s->fmbm_tfdne); |
| iowrite32be(NIA_ENG_QMI_ENQ | NIA_ORDER_RESTOR, ®s->fmbm_tfene); |
| if (cfg->fmbm_tfne_has_features) |
| iowrite32be(!cfg->dflt_fqid ? |
| BMI_EBD_EN | NIA_BMI_AC_FETCH_ALL_FRAME : |
| NIA_BMI_AC_FETCH_ALL_FRAME, ®s->fmbm_tfne); |
| if (!cfg->dflt_fqid && cfg->dont_release_buf) { |
| iowrite32be(DFLT_FQ_ID, ®s->fmbm_tcfqid); |
| iowrite32be(NIA_ENG_BMI | NIA_BMI_AC_TX_RELEASE, |
| ®s->fmbm_tfene); |
| if (cfg->fmbm_tfne_has_features) |
| iowrite32be(ioread32be(®s->fmbm_tfne) & ~BMI_EBD_EN, |
| ®s->fmbm_tfne); |
| } |
| |
| /* Confirmation/error queues */ |
| if (cfg->dflt_fqid || !cfg->dont_release_buf) |
| iowrite32be(cfg->dflt_fqid & DFLT_FQ_ID, ®s->fmbm_tcfqid); |
| iowrite32be((cfg->err_fqid & DFLT_FQ_ID), ®s->fmbm_tefqid); |
| |
| return 0; |
| } |
| |
| static int init_qmi(struct fman_port *port) |
| { |
| struct fman_port_qmi_regs __iomem *regs = port->qmi_regs; |
| struct fman_port_cfg *cfg = port->cfg; |
| u32 tmp; |
| |
| /* Rx port configuration */ |
| if (port->port_type == FMAN_PORT_TYPE_RX) { |
| /* Enqueue NIA */ |
| iowrite32be(NIA_ENG_BMI | NIA_BMI_AC_RELEASE, ®s->fmqm_pnen); |
| return 0; |
| } |
| |
| /* Continue with Tx port configuration */ |
| if (port->port_type == FMAN_PORT_TYPE_TX) { |
| /* Enqueue NIA */ |
| iowrite32be(NIA_ENG_BMI | NIA_BMI_AC_TX_RELEASE, |
| ®s->fmqm_pnen); |
| /* Dequeue NIA */ |
| iowrite32be(NIA_ENG_BMI | NIA_BMI_AC_TX, ®s->fmqm_pndn); |
| } |
| |
| /* Dequeue Configuration register */ |
| tmp = 0; |
| if (cfg->deq_high_priority) |
| tmp |= QMI_DEQ_CFG_PRI; |
| |
| switch (cfg->deq_type) { |
| case FMAN_PORT_DEQ_BY_PRI: |
| tmp |= QMI_DEQ_CFG_TYPE1; |
| break; |
| case FMAN_PORT_DEQ_ACTIVE_FQ: |
| tmp |= QMI_DEQ_CFG_TYPE2; |
| break; |
| case FMAN_PORT_DEQ_ACTIVE_FQ_NO_ICS: |
| tmp |= QMI_DEQ_CFG_TYPE3; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| switch (cfg->deq_prefetch_option) { |
| case FMAN_PORT_DEQ_NO_PREFETCH: |
| break; |
| case FMAN_PORT_DEQ_PART_PREFETCH: |
| tmp |= QMI_DEQ_CFG_PREFETCH_PARTIAL; |
| break; |
| case FMAN_PORT_DEQ_FULL_PREFETCH: |
| tmp |= QMI_DEQ_CFG_PREFETCH_FULL; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| tmp |= (cfg->deq_sp & QMI_DEQ_CFG_SP_MASK) << QMI_DEQ_CFG_SP_SHIFT; |
| tmp |= cfg->deq_byte_cnt; |
| iowrite32be(tmp, ®s->fmqm_pndc); |
| |
| return 0; |
| } |
| |
| static void stop_port_hwp(struct fman_port *port) |
| { |
| struct fman_port_hwp_regs __iomem *regs = port->hwp_regs; |
| int cnt = 100; |
| |
| iowrite32be(HWP_HXS_PCAC_PSTOP, ®s->fmpr_pcac); |
| |
| while (cnt-- > 0 && |
| (ioread32be(®s->fmpr_pcac) & HWP_HXS_PCAC_PSTAT)) |
| udelay(10); |
| if (!cnt) |
| pr_err("Timeout stopping HW Parser\n"); |
| } |
| |
| static void start_port_hwp(struct fman_port *port) |
| { |
| struct fman_port_hwp_regs __iomem *regs = port->hwp_regs; |
| int cnt = 100; |
| |
| iowrite32be(0, ®s->fmpr_pcac); |
| |
| while (cnt-- > 0 && |
| !(ioread32be(®s->fmpr_pcac) & HWP_HXS_PCAC_PSTAT)) |
| udelay(10); |
| if (!cnt) |
| pr_err("Timeout starting HW Parser\n"); |
| } |
| |
| static void init_hwp(struct fman_port *port) |
| { |
| struct fman_port_hwp_regs __iomem *regs = port->hwp_regs; |
| int i; |
| |
| stop_port_hwp(port); |
| |
| for (i = 0; i < HWP_HXS_COUNT; i++) { |
| /* enable HXS error reporting into FD[STATUS] PHE */ |
| iowrite32be(0x00000000, ®s->pmda[i].ssa); |
| iowrite32be(0xffffffff, ®s->pmda[i].lcv); |
| } |
| |
| /* Short packet padding removal from checksum calculation */ |
| iowrite32be(HWP_HXS_SH_PAD_REM, ®s->pmda[HWP_HXS_TCP_OFFSET].ssa); |
| iowrite32be(HWP_HXS_SH_PAD_REM, ®s->pmda[HWP_HXS_UDP_OFFSET].ssa); |
| |
| start_port_hwp(port); |
| } |
| |
| static int init(struct fman_port *port) |
| { |
| int err; |
| |
| /* Init BMI registers */ |
| switch (port->port_type) { |
| case FMAN_PORT_TYPE_RX: |
| err = init_bmi_rx(port); |
| if (!err) |
| init_hwp(port); |
| break; |
| case FMAN_PORT_TYPE_TX: |
| err = init_bmi_tx(port); |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| if (err) |
| return err; |
| |
| /* Init QMI registers */ |
| err = init_qmi(port); |
| if (err) |
| return err; |
| |
| return 0; |
| } |
| |
| static int set_bpools(const struct fman_port *port, |
| const struct fman_port_bpools *bp) |
| { |
| u32 __iomem *bp_reg, *bp_depl_reg; |
| u32 tmp; |
| u8 i, max_bp_num; |
| bool grp_depl_used = false, rx_port; |
| |
| switch (port->port_type) { |
| case FMAN_PORT_TYPE_RX: |
| max_bp_num = port->ext_pools_num; |
| rx_port = true; |
| bp_reg = port->bmi_regs->rx.fmbm_ebmpi; |
| bp_depl_reg = &port->bmi_regs->rx.fmbm_mpd; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| if (rx_port) { |
| /* Check buffers are provided in ascending order */ |
| for (i = 0; (i < (bp->count - 1) && |
| (i < FMAN_PORT_MAX_EXT_POOLS_NUM - 1)); i++) { |
| if (bp->bpool[i].size > bp->bpool[i + 1].size) |
| return -EINVAL; |
| } |
| } |
| |
| /* Set up external buffers pools */ |
| for (i = 0; i < bp->count; i++) { |
| tmp = BMI_EXT_BUF_POOL_VALID; |
| tmp |= ((u32)bp->bpool[i].bpid << |
| BMI_EXT_BUF_POOL_ID_SHIFT) & BMI_EXT_BUF_POOL_ID_MASK; |
| |
| if (rx_port) { |
| if (bp->counters_enable) |
| tmp |= BMI_EXT_BUF_POOL_EN_COUNTER; |
| |
| if (bp->bpool[i].is_backup) |
| tmp |= BMI_EXT_BUF_POOL_BACKUP; |
| |
| tmp |= (u32)bp->bpool[i].size; |
| } |
| |
| iowrite32be(tmp, &bp_reg[i]); |
| } |
| |
| /* Clear unused pools */ |
| for (i = bp->count; i < max_bp_num; i++) |
| iowrite32be(0, &bp_reg[i]); |
| |
| /* Pools depletion */ |
| tmp = 0; |
| for (i = 0; i < FMAN_PORT_MAX_EXT_POOLS_NUM; i++) { |
| if (bp->bpool[i].grp_bp_depleted) { |
| grp_depl_used = true; |
| tmp |= 0x80000000 >> i; |
| } |
| |
| if (bp->bpool[i].single_bp_depleted) |
| tmp |= 0x80 >> i; |
| } |
| |
| if (grp_depl_used) |
| tmp |= ((u32)bp->grp_bp_depleted_num - 1) << |
| BMI_POOL_DEP_NUM_OF_POOLS_SHIFT; |
| |
| iowrite32be(tmp, bp_depl_reg); |
| return 0; |
| } |
| |
| static bool is_init_done(struct fman_port_cfg *cfg) |
| { |
| /* Checks if FMan port driver parameters were initialized */ |
| if (!cfg) |
| return true; |
| |
| return false; |
| } |
| |
| static int verify_size_of_fifo(struct fman_port *port) |
| { |
| u32 min_fifo_size_required = 0, opt_fifo_size_for_b2b = 0; |
| |
| /* TX Ports */ |
| if (port->port_type == FMAN_PORT_TYPE_TX) { |
| min_fifo_size_required = (u32) |
| (roundup(port->max_frame_length, |
| FMAN_BMI_FIFO_UNITS) + (3 * FMAN_BMI_FIFO_UNITS)); |
| |
| min_fifo_size_required += |
| port->cfg->tx_fifo_deq_pipeline_depth * |
| FMAN_BMI_FIFO_UNITS; |
| |
| opt_fifo_size_for_b2b = min_fifo_size_required; |
| |
| /* Add some margin for back-to-back capability to improve |
| * performance, allows the hardware to pipeline new frame dma |
| * while the previous frame not yet transmitted. |
| */ |
| if (port->port_speed == 10000) |
| opt_fifo_size_for_b2b += 3 * FMAN_BMI_FIFO_UNITS; |
| else |
| opt_fifo_size_for_b2b += 2 * FMAN_BMI_FIFO_UNITS; |
| } |
| |
| /* RX Ports */ |
| else if (port->port_type == FMAN_PORT_TYPE_RX) { |
| if (port->rev_info.major >= 6) |
| min_fifo_size_required = (u32) |
| (roundup(port->max_frame_length, |
| FMAN_BMI_FIFO_UNITS) + |
| (5 * FMAN_BMI_FIFO_UNITS)); |
| /* 4 according to spec + 1 for FOF>0 */ |
| else |
| min_fifo_size_required = (u32) |
| (roundup(min(port->max_frame_length, |
| port->rx_pools_params.largest_buf_size), |
| FMAN_BMI_FIFO_UNITS) + |
| (7 * FMAN_BMI_FIFO_UNITS)); |
| |
| opt_fifo_size_for_b2b = min_fifo_size_required; |
| |
| /* Add some margin for back-to-back capability to improve |
| * performance,allows the hardware to pipeline new frame dma |
| * while the previous frame not yet transmitted. |
| */ |
| if (port->port_speed == 10000) |
| opt_fifo_size_for_b2b += 8 * FMAN_BMI_FIFO_UNITS; |
| else |
| opt_fifo_size_for_b2b += 3 * FMAN_BMI_FIFO_UNITS; |
| } |
| |
| WARN_ON(min_fifo_size_required <= 0); |
| WARN_ON(opt_fifo_size_for_b2b < min_fifo_size_required); |
| |
| /* Verify the size */ |
| if (port->fifo_bufs.num < min_fifo_size_required) |
| dev_dbg(port->dev, "%s: FIFO size should be enlarged to %d bytes\n", |
| __func__, min_fifo_size_required); |
| else if (port->fifo_bufs.num < opt_fifo_size_for_b2b) |
| dev_dbg(port->dev, "%s: For b2b processing,FIFO may be enlarged to %d bytes\n", |
| __func__, opt_fifo_size_for_b2b); |
| |
| return 0; |
| } |
| |
| static int set_ext_buffer_pools(struct fman_port *port) |
| { |
| struct fman_ext_pools *ext_buf_pools = &port->cfg->ext_buf_pools; |
| struct fman_buf_pool_depletion *buf_pool_depletion = |
| &port->cfg->buf_pool_depletion; |
| u8 ordered_array[FMAN_PORT_MAX_EXT_POOLS_NUM]; |
| u16 sizes_array[BM_MAX_NUM_OF_POOLS]; |
| int i = 0, j = 0, err; |
| struct fman_port_bpools bpools; |
| |
| memset(&ordered_array, 0, sizeof(u8) * FMAN_PORT_MAX_EXT_POOLS_NUM); |
| memset(&sizes_array, 0, sizeof(u16) * BM_MAX_NUM_OF_POOLS); |
| memcpy(&port->ext_buf_pools, ext_buf_pools, |
| sizeof(struct fman_ext_pools)); |
| |
| fman_sp_set_buf_pools_in_asc_order_of_buf_sizes(ext_buf_pools, |
| ordered_array, |
| sizes_array); |
| |
| memset(&bpools, 0, sizeof(struct fman_port_bpools)); |
| bpools.count = ext_buf_pools->num_of_pools_used; |
| bpools.counters_enable = true; |
| for (i = 0; i < ext_buf_pools->num_of_pools_used; i++) { |
| bpools.bpool[i].bpid = ordered_array[i]; |
| bpools.bpool[i].size = sizes_array[ordered_array[i]]; |
| } |
| |
| /* save pools parameters for later use */ |
| port->rx_pools_params.num_of_pools = ext_buf_pools->num_of_pools_used; |
| port->rx_pools_params.largest_buf_size = |
| sizes_array[ordered_array[ext_buf_pools->num_of_pools_used - 1]]; |
| |
| /* FMBM_RMPD reg. - pool depletion */ |
| if (buf_pool_depletion->pools_grp_mode_enable) { |
| bpools.grp_bp_depleted_num = buf_pool_depletion->num_of_pools; |
| for (i = 0; i < port->bm_max_num_of_pools; i++) { |
| if (buf_pool_depletion->pools_to_consider[i]) { |
| for (j = 0; j < ext_buf_pools-> |
| num_of_pools_used; j++) { |
| if (i == ordered_array[j]) { |
| bpools.bpool[j]. |
| grp_bp_depleted = true; |
| break; |
| } |
| } |
| } |
| } |
| } |
| |
| if (buf_pool_depletion->single_pool_mode_enable) { |
| for (i = 0; i < port->bm_max_num_of_pools; i++) { |
| if (buf_pool_depletion-> |
| pools_to_consider_for_single_mode[i]) { |
| for (j = 0; j < ext_buf_pools-> |
| num_of_pools_used; j++) { |
| if (i == ordered_array[j]) { |
| bpools.bpool[j]. |
| single_bp_depleted = true; |
| break; |
| } |
| } |
| } |
| } |
| } |
| |
| err = set_bpools(port, &bpools); |
| if (err != 0) { |
| dev_err(port->dev, "%s: set_bpools() failed\n", __func__); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int init_low_level_driver(struct fman_port *port) |
| { |
| struct fman_port_cfg *cfg = port->cfg; |
| u32 tmp_val; |
| |
| switch (port->port_type) { |
| case FMAN_PORT_TYPE_RX: |
| cfg->err_mask = (RX_ERRS_TO_ENQ & ~cfg->discard_mask); |
| break; |
| default: |
| break; |
| } |
| |
| tmp_val = (u32)((port->internal_buf_offset % OFFSET_UNITS) ? |
| (port->internal_buf_offset / OFFSET_UNITS + 1) : |
| (port->internal_buf_offset / OFFSET_UNITS)); |
| port->internal_buf_offset = (u8)(tmp_val * OFFSET_UNITS); |
| port->cfg->int_buf_start_margin = port->internal_buf_offset; |
| |
| if (init(port) != 0) { |
| dev_err(port->dev, "%s: fman port initialization failed\n", |
| __func__); |
| return -ENODEV; |
| } |
| |
| /* The code bellow is a trick so the FM will not release the buffer |
| * to BM nor will try to enqueue the frame to QM |
| */ |
| if (port->port_type == FMAN_PORT_TYPE_TX) { |
| if (!cfg->dflt_fqid && cfg->dont_release_buf) { |
| /* override fmbm_tcfqid 0 with a false non-0 value. |
| * This will force FM to act according to tfene. |
| * Otherwise, if fmbm_tcfqid is 0 the FM will release |
| * buffers to BM regardless of fmbm_tfene |
| */ |
| iowrite32be(0xFFFFFF, &port->bmi_regs->tx.fmbm_tcfqid); |
| iowrite32be(NIA_ENG_BMI | NIA_BMI_AC_TX_RELEASE, |
| &port->bmi_regs->tx.fmbm_tfene); |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int fill_soc_specific_params(struct fman_port *port) |
| { |
| u32 bmi_max_fifo_size; |
| |
| bmi_max_fifo_size = fman_get_bmi_max_fifo_size(port->fm); |
| port->max_port_fifo_size = MAX_PORT_FIFO_SIZE(bmi_max_fifo_size); |
| port->bm_max_num_of_pools = 64; |
| |
| /* P4080 - Major 2 |
| * P2041/P3041/P5020/P5040 - Major 3 |
| * Tx/Bx - Major 6 |
| */ |
| switch (port->rev_info.major) { |
| case 2: |
| case 3: |
| port->max_num_of_ext_pools = 4; |
| port->max_num_of_sub_portals = 12; |
| break; |
| |
| case 6: |
| port->max_num_of_ext_pools = 8; |
| port->max_num_of_sub_portals = 16; |
| break; |
| |
| default: |
| dev_err(port->dev, "%s: Unsupported FMan version\n", __func__); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int get_dflt_fifo_deq_pipeline_depth(u8 major, enum fman_port_type type, |
| u16 speed) |
| { |
| switch (type) { |
| case FMAN_PORT_TYPE_RX: |
| case FMAN_PORT_TYPE_TX: |
| switch (speed) { |
| case 10000: |
| return 4; |
| case 1000: |
| if (major >= 6) |
| return 2; |
| else |
| return 1; |
| default: |
| return 0; |
| } |
| default: |
| return 0; |
| } |
| } |
| |
| static int get_dflt_num_of_tasks(u8 major, enum fman_port_type type, |
| u16 speed) |
| { |
| switch (type) { |
| case FMAN_PORT_TYPE_RX: |
| case FMAN_PORT_TYPE_TX: |
| switch (speed) { |
| case 10000: |
| return 16; |
| case 1000: |
| if (major >= 6) |
| return 4; |
| else |
| return 3; |
| default: |
| return 0; |
| } |
| default: |
| return 0; |
| } |
| } |
| |
| static int get_dflt_extra_num_of_tasks(u8 major, enum fman_port_type type, |
| u16 speed) |
| { |
| switch (type) { |
| case FMAN_PORT_TYPE_RX: |
| /* FMan V3 */ |
| if (major >= 6) |
| return 0; |
| |
| /* FMan V2 */ |
| if (speed == 10000) |
| return 8; |
| else |
| return 2; |
| case FMAN_PORT_TYPE_TX: |
| default: |
| return 0; |
| } |
| } |
| |
| static int get_dflt_num_of_open_dmas(u8 major, enum fman_port_type type, |
| u16 speed) |
| { |
| int val; |
| |
| if (major >= 6) { |
| switch (type) { |
| case FMAN_PORT_TYPE_TX: |
| if (speed == 10000) |
| val = 12; |
| else |
| val = 3; |
| break; |
| case FMAN_PORT_TYPE_RX: |
| if (speed == 10000) |
| val = 8; |
| else |
| val = 2; |
| break; |
| default: |
| return 0; |
| } |
| } else { |
| switch (type) { |
| case FMAN_PORT_TYPE_TX: |
| case FMAN_PORT_TYPE_RX: |
| if (speed == 10000) |
| val = 8; |
| else |
| val = 1; |
| break; |
| default: |
| val = 0; |
| } |
| } |
| |
| return val; |
| } |
| |
| static int get_dflt_extra_num_of_open_dmas(u8 major, enum fman_port_type type, |
| u16 speed) |
| { |
| /* FMan V3 */ |
| if (major >= 6) |
| return 0; |
| |
| /* FMan V2 */ |
| switch (type) { |
| case FMAN_PORT_TYPE_RX: |
| case FMAN_PORT_TYPE_TX: |
| if (speed == 10000) |
| return 8; |
| else |
| return 1; |
| default: |
| return 0; |
| } |
| } |
| |
| static int get_dflt_num_of_fifo_bufs(u8 major, enum fman_port_type type, |
| u16 speed) |
| { |
| int val; |
| |
| if (major >= 6) { |
| switch (type) { |
| case FMAN_PORT_TYPE_TX: |
| if (speed == 10000) |
| val = 64; |
| else |
| val = 50; |
| break; |
| case FMAN_PORT_TYPE_RX: |
| if (speed == 10000) |
| val = 96; |
| else |
| val = 50; |
| break; |
| default: |
| val = 0; |
| } |
| } else { |
| switch (type) { |
| case FMAN_PORT_TYPE_TX: |
| if (speed == 10000) |
| val = 48; |
| else |
| val = 44; |
| break; |
| case FMAN_PORT_TYPE_RX: |
| if (speed == 10000) |
| val = 48; |
| else |
| val = 45; |
| break; |
| default: |
| val = 0; |
| } |
| } |
| |
| return val; |
| } |
| |
| static void set_dflt_cfg(struct fman_port *port, |
| struct fman_port_params *port_params) |
| { |
| struct fman_port_cfg *cfg = port->cfg; |
| |
| cfg->dma_swap_data = FMAN_PORT_DMA_NO_SWAP; |
| cfg->color = FMAN_PORT_COLOR_GREEN; |
| cfg->rx_cut_end_bytes = DFLT_PORT_CUT_BYTES_FROM_END; |
| cfg->rx_pri_elevation = BMI_PRIORITY_ELEVATION_LEVEL; |
| cfg->rx_fifo_thr = BMI_FIFO_THRESHOLD; |
| cfg->tx_fifo_low_comf_level = (5 * 1024); |
| cfg->deq_type = FMAN_PORT_DEQ_BY_PRI; |
| cfg->deq_prefetch_option = FMAN_PORT_DEQ_FULL_PREFETCH; |
| cfg->tx_fifo_deq_pipeline_depth = |
| BMI_DEQUEUE_PIPELINE_DEPTH(port->port_type, port->port_speed); |
| cfg->deq_byte_cnt = QMI_BYTE_COUNT_LEVEL_CONTROL(port->port_type); |
| |
| cfg->rx_pri_elevation = |
| DFLT_PORT_RX_FIFO_PRI_ELEVATION_LEV(port->max_port_fifo_size); |
| port->cfg->rx_fifo_thr = |
| DFLT_PORT_RX_FIFO_THRESHOLD(port->rev_info.major, |
| port->max_port_fifo_size); |
| |
| if ((port->rev_info.major == 6) && |
| ((port->rev_info.minor == 0) || (port->rev_info.minor == 3))) |
| cfg->errata_A006320 = true; |
| |
| /* Excessive Threshold register - exists for pre-FMv3 chips only */ |
| if (port->rev_info.major < 6) |
| cfg->excessive_threshold_register = true; |
| else |
| cfg->fmbm_tfne_has_features = true; |
| |
| cfg->buffer_prefix_content.data_align = |
| DFLT_PORT_BUFFER_PREFIX_CONTEXT_DATA_ALIGN; |
| } |
| |
| static void set_rx_dflt_cfg(struct fman_port *port, |
| struct fman_port_params *port_params) |
| { |
| port->cfg->discard_mask = DFLT_PORT_ERRORS_TO_DISCARD; |
| |
| memcpy(&port->cfg->ext_buf_pools, |
| &port_params->specific_params.rx_params.ext_buf_pools, |
| sizeof(struct fman_ext_pools)); |
| port->cfg->err_fqid = |
| port_params->specific_params.rx_params.err_fqid; |
| port->cfg->dflt_fqid = |
| port_params->specific_params.rx_params.dflt_fqid; |
| port->cfg->pcd_base_fqid = |
| port_params->specific_params.rx_params.pcd_base_fqid; |
| port->cfg->pcd_fqs_count = |
| port_params->specific_params.rx_params.pcd_fqs_count; |
| } |
| |
| static void set_tx_dflt_cfg(struct fman_port *port, |
| struct fman_port_params *port_params, |
| struct fman_port_dts_params *dts_params) |
| { |
| port->cfg->tx_fifo_deq_pipeline_depth = |
| get_dflt_fifo_deq_pipeline_depth(port->rev_info.major, |
| port->port_type, |
| port->port_speed); |
| port->cfg->err_fqid = |
| port_params->specific_params.non_rx_params.err_fqid; |
| port->cfg->deq_sp = |
| (u8)(dts_params->qman_channel_id & QMI_DEQ_CFG_SUBPORTAL_MASK); |
| port->cfg->dflt_fqid = |
| port_params->specific_params.non_rx_params.dflt_fqid; |
| port->cfg->deq_high_priority = true; |
| } |
| |
| /** |
| * fman_port_config |
| * @port: Pointer to the port structure |
| * @params: Pointer to data structure of parameters |
| * |
| * Creates a descriptor for the FM PORT module. |
| * The routine returns a pointer to the FM PORT object. |
| * This descriptor must be passed as first parameter to all other FM PORT |
| * function calls. |
| * No actual initialization or configuration of FM hardware is done by this |
| * routine. |
| * |
| * Return: 0 on success; Error code otherwise. |
| */ |
| int fman_port_config(struct fman_port *port, struct fman_port_params *params) |
| { |
| void __iomem *base_addr = port->dts_params.base_addr; |
| int err; |
| |
| /* Allocate the FM driver's parameters structure */ |
| port->cfg = kzalloc(sizeof(*port->cfg), GFP_KERNEL); |
| if (!port->cfg) |
| return -EINVAL; |
| |
| /* Initialize FM port parameters which will be kept by the driver */ |
| port->port_type = port->dts_params.type; |
| port->port_speed = port->dts_params.speed; |
| port->port_id = port->dts_params.id; |
| port->fm = port->dts_params.fman; |
| port->ext_pools_num = (u8)8; |
| |
| /* get FM revision */ |
| fman_get_revision(port->fm, &port->rev_info); |
| |
| err = fill_soc_specific_params(port); |
| if (err) |
| goto err_port_cfg; |
| |
| switch (port->port_type) { |
| case FMAN_PORT_TYPE_RX: |
| set_rx_dflt_cfg(port, params); |
| fallthrough; |
| case FMAN_PORT_TYPE_TX: |
| set_tx_dflt_cfg(port, params, &port->dts_params); |
| fallthrough; |
| default: |
| set_dflt_cfg(port, params); |
| } |
| |
| /* Continue with other parameters */ |
| /* set memory map pointers */ |
| port->bmi_regs = base_addr + BMI_PORT_REGS_OFFSET; |
| port->qmi_regs = base_addr + QMI_PORT_REGS_OFFSET; |
| port->hwp_regs = base_addr + HWP_PORT_REGS_OFFSET; |
| |
| port->max_frame_length = DFLT_PORT_MAX_FRAME_LENGTH; |
| /* resource distribution. */ |
| |
| port->fifo_bufs.num = |
| get_dflt_num_of_fifo_bufs(port->rev_info.major, port->port_type, |
| port->port_speed) * FMAN_BMI_FIFO_UNITS; |
| port->fifo_bufs.extra = |
| DFLT_PORT_EXTRA_NUM_OF_FIFO_BUFS * FMAN_BMI_FIFO_UNITS; |
| |
| port->open_dmas.num = |
| get_dflt_num_of_open_dmas(port->rev_info.major, |
| port->port_type, port->port_speed); |
| port->open_dmas.extra = |
| get_dflt_extra_num_of_open_dmas(port->rev_info.major, |
| port->port_type, port->port_speed); |
| port->tasks.num = |
| get_dflt_num_of_tasks(port->rev_info.major, |
| port->port_type, port->port_speed); |
| port->tasks.extra = |
| get_dflt_extra_num_of_tasks(port->rev_info.major, |
| port->port_type, port->port_speed); |
| |
| /* FM_HEAVY_TRAFFIC_SEQUENCER_HANG_ERRATA_FMAN_A006981 errata |
| * workaround |
| */ |
| if ((port->rev_info.major == 6) && (port->rev_info.minor == 0) && |
| (((port->port_type == FMAN_PORT_TYPE_TX) && |
| (port->port_speed == 1000)))) { |
| port->open_dmas.num = 16; |
| port->open_dmas.extra = 0; |
| } |
| |
| if (port->rev_info.major >= 6 && |
| port->port_type == FMAN_PORT_TYPE_TX && |
| port->port_speed == 1000) { |
| /* FM_WRONG_RESET_VALUES_ERRATA_FMAN_A005127 Errata |
| * workaround |
| */ |
| u32 reg; |
| |
| reg = 0x00001013; |
| iowrite32be(reg, &port->bmi_regs->tx.fmbm_tfp); |
| } |
| |
| return 0; |
| |
| err_port_cfg: |
| kfree(port->cfg); |
| return -EINVAL; |
| } |
| EXPORT_SYMBOL(fman_port_config); |
| |
| /* |
| * fman_port_use_kg_hash |
| * @port: A pointer to a FM Port module. |
| * @enable: enable or disable |
| * |
| * Sets the HW KeyGen or the BMI as HW Parser next engine, enabling |
| * or bypassing the KeyGen hashing of Rx traffic |
| */ |
| void fman_port_use_kg_hash(struct fman_port *port, bool enable) |
| { |
| if (enable) |
| /* After the Parser frames go to KeyGen */ |
| iowrite32be(NIA_ENG_HWK, &port->bmi_regs->rx.fmbm_rfpne); |
| else |
| /* After the Parser frames go to BMI */ |
| iowrite32be(NIA_ENG_BMI | NIA_BMI_AC_ENQ_FRAME, |
| &port->bmi_regs->rx.fmbm_rfpne); |
| } |
| EXPORT_SYMBOL(fman_port_use_kg_hash); |
| |
| /** |
| * fman_port_init |
| * @port: A pointer to a FM Port module. |
| * |
| * Initializes the FM PORT module by defining the software structure and |
| * configuring the hardware registers. |
| * |
| * Return: 0 on success; Error code otherwise. |
| */ |
| int fman_port_init(struct fman_port *port) |
| { |
| struct fman_port_init_params params; |
| struct fman_keygen *keygen; |
| struct fman_port_cfg *cfg; |
| int err; |
| |
| if (is_init_done(port->cfg)) |
| return -EINVAL; |
| |
| err = fman_sp_build_buffer_struct(&port->cfg->int_context, |
| &port->cfg->buffer_prefix_content, |
| &port->cfg->buf_margins, |
| &port->buffer_offsets, |
| &port->internal_buf_offset); |
| if (err) |
| return err; |
| |
| cfg = port->cfg; |
| |
| if (port->port_type == FMAN_PORT_TYPE_RX) { |
| /* Call the external Buffer routine which also checks fifo |
| * size and updates it if necessary |
| */ |
| /* define external buffer pools and pool depletion */ |
| err = set_ext_buffer_pools(port); |
| if (err) |
| return err; |
| /* check if the largest external buffer pool is large enough */ |
| if (cfg->buf_margins.start_margins + MIN_EXT_BUF_SIZE + |
| cfg->buf_margins.end_margins > |
| port->rx_pools_params.largest_buf_size) { |
| dev_err(port->dev, "%s: buf_margins.start_margins (%d) + minimum buf size (64) + buf_margins.end_margins (%d) is larger than maximum external buffer size (%d)\n", |
| __func__, cfg->buf_margins.start_margins, |
| cfg->buf_margins.end_margins, |
| port->rx_pools_params.largest_buf_size); |
| return -EINVAL; |
| } |
| } |
| |
| /* Call FM module routine for communicating parameters */ |
| memset(¶ms, 0, sizeof(params)); |
| params.port_id = port->port_id; |
| params.port_type = port->port_type; |
| params.port_speed = port->port_speed; |
| params.num_of_tasks = (u8)port->tasks.num; |
| params.num_of_extra_tasks = (u8)port->tasks.extra; |
| params.num_of_open_dmas = (u8)port->open_dmas.num; |
| params.num_of_extra_open_dmas = (u8)port->open_dmas.extra; |
| |
| if (port->fifo_bufs.num) { |
| err = verify_size_of_fifo(port); |
| if (err) |
| return err; |
| } |
| params.size_of_fifo = port->fifo_bufs.num; |
| params.extra_size_of_fifo = port->fifo_bufs.extra; |
| params.deq_pipeline_depth = port->cfg->tx_fifo_deq_pipeline_depth; |
| params.max_frame_length = port->max_frame_length; |
| |
| err = fman_set_port_params(port->fm, ¶ms); |
| if (err) |
| return err; |
| |
| err = init_low_level_driver(port); |
| if (err) |
| return err; |
| |
| if (port->cfg->pcd_fqs_count) { |
| keygen = port->dts_params.fman->keygen; |
| err = keygen_port_hashing_init(keygen, port->port_id, |
| port->cfg->pcd_base_fqid, |
| port->cfg->pcd_fqs_count); |
| if (err) |
| return err; |
| |
| fman_port_use_kg_hash(port, true); |
| } |
| |
| kfree(port->cfg); |
| port->cfg = NULL; |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(fman_port_init); |
| |
| /** |
| * fman_port_cfg_buf_prefix_content |
| * @port: A pointer to a FM Port module. |
| * @buffer_prefix_content: A structure of parameters describing |
| * the structure of the buffer. |
| * Out parameter: |
| * Start margin - offset of data from |
| * start of external buffer. |
| * Defines the structure, size and content of the application buffer. |
| * The prefix, in Tx ports, if 'pass_prs_result', the application should set |
| * a value to their offsets in the prefix of the FM will save the first |
| * 'priv_data_size', than, depending on 'pass_prs_result' and |
| * 'pass_time_stamp', copy parse result and timeStamp, and the packet itself |
| * (in this order), to the application buffer, and to offset. |
| * Calling this routine changes the buffer margins definitions in the internal |
| * driver data base from its default configuration: |
| * Data size: [DEFAULT_PORT_BUFFER_PREFIX_CONTENT_PRIV_DATA_SIZE] |
| * Pass Parser result: [DEFAULT_PORT_BUFFER_PREFIX_CONTENT_PASS_PRS_RESULT]. |
| * Pass timestamp: [DEFAULT_PORT_BUFFER_PREFIX_CONTENT_PASS_TIME_STAMP]. |
| * May be used for all ports |
| * |
| * Allowed only following fman_port_config() and before fman_port_init(). |
| * |
| * Return: 0 on success; Error code otherwise. |
| */ |
| int fman_port_cfg_buf_prefix_content(struct fman_port *port, |
| struct fman_buffer_prefix_content * |
| buffer_prefix_content) |
| { |
| if (is_init_done(port->cfg)) |
| return -EINVAL; |
| |
| memcpy(&port->cfg->buffer_prefix_content, |
| buffer_prefix_content, |
| sizeof(struct fman_buffer_prefix_content)); |
| /* if data_align was not initialized by user, |
| * we return to driver's default |
| */ |
| if (!port->cfg->buffer_prefix_content.data_align) |
| port->cfg->buffer_prefix_content.data_align = |
| DFLT_PORT_BUFFER_PREFIX_CONTEXT_DATA_ALIGN; |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(fman_port_cfg_buf_prefix_content); |
| |
| /** |
| * fman_port_disable |
| * @port: A pointer to a FM Port module. |
| * |
| * Gracefully disable an FM port. The port will not start new tasks after all |
| * tasks associated with the port are terminated. |
| * |
| * This is a blocking routine, it returns after port is gracefully stopped, |
| * i.e. the port will not except new frames, but it will finish all frames |
| * or tasks which were already began. |
| * Allowed only following fman_port_init(). |
| * |
| * Return: 0 on success; Error code otherwise. |
| */ |
| int fman_port_disable(struct fman_port *port) |
| { |
| u32 __iomem *bmi_cfg_reg, *bmi_status_reg; |
| u32 tmp; |
| bool rx_port, failure = false; |
| int count; |
| |
| if (!is_init_done(port->cfg)) |
| return -EINVAL; |
| |
| switch (port->port_type) { |
| case FMAN_PORT_TYPE_RX: |
| bmi_cfg_reg = &port->bmi_regs->rx.fmbm_rcfg; |
| bmi_status_reg = &port->bmi_regs->rx.fmbm_rst; |
| rx_port = true; |
| break; |
| case FMAN_PORT_TYPE_TX: |
| bmi_cfg_reg = &port->bmi_regs->tx.fmbm_tcfg; |
| bmi_status_reg = &port->bmi_regs->tx.fmbm_tst; |
| rx_port = false; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| /* Disable QMI */ |
| if (!rx_port) { |
| tmp = ioread32be(&port->qmi_regs->fmqm_pnc) & ~QMI_PORT_CFG_EN; |
| iowrite32be(tmp, &port->qmi_regs->fmqm_pnc); |
| |
| /* Wait for QMI to finish FD handling */ |
| count = 100; |
| do { |
| udelay(10); |
| tmp = ioread32be(&port->qmi_regs->fmqm_pns); |
| } while ((tmp & QMI_PORT_STATUS_DEQ_FD_BSY) && --count); |
| |
| if (count == 0) { |
| /* Timeout */ |
| failure = true; |
| } |
| } |
| |
| /* Disable BMI */ |
| tmp = ioread32be(bmi_cfg_reg) & ~BMI_PORT_CFG_EN; |
| iowrite32be(tmp, bmi_cfg_reg); |
| |
| /* Wait for graceful stop end */ |
| count = 500; |
| do { |
| udelay(10); |
| tmp = ioread32be(bmi_status_reg); |
| } while ((tmp & BMI_PORT_STATUS_BSY) && --count); |
| |
| if (count == 0) { |
| /* Timeout */ |
| failure = true; |
| } |
| |
| if (failure) |
| dev_dbg(port->dev, "%s: FMan Port[%d]: BMI or QMI is Busy. Port forced down\n", |
| __func__, port->port_id); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(fman_port_disable); |
| |
| /** |
| * fman_port_enable |
| * @port: A pointer to a FM Port module. |
| * |
| * A runtime routine provided to allow disable/enable of port. |
| * |
| * Allowed only following fman_port_init(). |
| * |
| * Return: 0 on success; Error code otherwise. |
| */ |
| int fman_port_enable(struct fman_port *port) |
| { |
| u32 __iomem *bmi_cfg_reg; |
| u32 tmp; |
| bool rx_port; |
| |
| if (!is_init_done(port->cfg)) |
| return -EINVAL; |
| |
| switch (port->port_type) { |
| case FMAN_PORT_TYPE_RX: |
| bmi_cfg_reg = &port->bmi_regs->rx.fmbm_rcfg; |
| rx_port = true; |
| break; |
| case FMAN_PORT_TYPE_TX: |
| bmi_cfg_reg = &port->bmi_regs->tx.fmbm_tcfg; |
| rx_port = false; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| /* Enable QMI */ |
| if (!rx_port) { |
| tmp = ioread32be(&port->qmi_regs->fmqm_pnc) | QMI_PORT_CFG_EN; |
| iowrite32be(tmp, &port->qmi_regs->fmqm_pnc); |
| } |
| |
| /* Enable BMI */ |
| tmp = ioread32be(bmi_cfg_reg) | BMI_PORT_CFG_EN; |
| iowrite32be(tmp, bmi_cfg_reg); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(fman_port_enable); |
| |
| /** |
| * fman_port_bind |
| * @dev: FMan Port OF device pointer |
| * |
| * Bind to a specific FMan Port. |
| * |
| * Allowed only after the port was created. |
| * |
| * Return: A pointer to the FMan port device. |
| */ |
| struct fman_port *fman_port_bind(struct device *dev) |
| { |
| return (struct fman_port *)(dev_get_drvdata(get_device(dev))); |
| } |
| EXPORT_SYMBOL(fman_port_bind); |
| |
| /** |
| * fman_port_get_qman_channel_id |
| * @port: Pointer to the FMan port devuce |
| * |
| * Get the QMan channel ID for the specific port |
| * |
| * Return: QMan channel ID |
| */ |
| u32 fman_port_get_qman_channel_id(struct fman_port *port) |
| { |
| return port->dts_params.qman_channel_id; |
| } |
| EXPORT_SYMBOL(fman_port_get_qman_channel_id); |
| |
| /** |
| * fman_port_get_device |
| * @port: Pointer to the FMan port device |
| * |
| * Get the 'struct device' associated to the specified FMan port device |
| * |
| * Return: pointer to associated 'struct device' |
| */ |
| struct device *fman_port_get_device(struct fman_port *port) |
| { |
| return port->dev; |
| } |
| EXPORT_SYMBOL(fman_port_get_device); |
| |
| int fman_port_get_hash_result_offset(struct fman_port *port, u32 *offset) |
| { |
| if (port->buffer_offsets.hash_result_offset == ILLEGAL_BASE) |
| return -EINVAL; |
| |
| *offset = port->buffer_offsets.hash_result_offset; |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(fman_port_get_hash_result_offset); |
| |
| int fman_port_get_tstamp(struct fman_port *port, const void *data, u64 *tstamp) |
| { |
| if (port->buffer_offsets.time_stamp_offset == ILLEGAL_BASE) |
| return -EINVAL; |
| |
| *tstamp = be64_to_cpu(*(__be64 *)(data + |
| port->buffer_offsets.time_stamp_offset)); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(fman_port_get_tstamp); |
| |
| static int fman_port_probe(struct platform_device *of_dev) |
| { |
| struct fman_port *port; |
| struct fman *fman; |
| struct device_node *fm_node, *port_node; |
| struct platform_device *fm_pdev; |
| struct resource res; |
| struct resource *dev_res; |
| u32 val; |
| int err = 0; |
| enum fman_port_type port_type; |
| u16 port_speed; |
| u8 port_id; |
| |
| port = kzalloc(sizeof(*port), GFP_KERNEL); |
| if (!port) |
| return -ENOMEM; |
| |
| port->dev = &of_dev->dev; |
| |
| port_node = of_node_get(of_dev->dev.of_node); |
| |
| /* Get the FM node */ |
| fm_node = of_get_parent(port_node); |
| if (!fm_node) { |
| dev_err(port->dev, "%s: of_get_parent() failed\n", __func__); |
| err = -ENODEV; |
| goto return_err; |
| } |
| |
| fm_pdev = of_find_device_by_node(fm_node); |
| of_node_put(fm_node); |
| if (!fm_pdev) { |
| err = -EINVAL; |
| goto return_err; |
| } |
| |
| fman = dev_get_drvdata(&fm_pdev->dev); |
| if (!fman) { |
| err = -EINVAL; |
| goto put_device; |
| } |
| |
| err = of_property_read_u32(port_node, "cell-index", &val); |
| if (err) { |
| dev_err(port->dev, "%s: reading cell-index for %pOF failed\n", |
| __func__, port_node); |
| err = -EINVAL; |
| goto put_device; |
| } |
| port_id = (u8)val; |
| port->dts_params.id = port_id; |
| |
| if (of_device_is_compatible(port_node, "fsl,fman-v3-port-tx")) { |
| port_type = FMAN_PORT_TYPE_TX; |
| port_speed = 1000; |
| if (of_property_read_bool(port_node, "fsl,fman-10g-port")) |
| port_speed = 10000; |
| |
| } else if (of_device_is_compatible(port_node, "fsl,fman-v2-port-tx")) { |
| if (port_id >= TX_10G_PORT_BASE) |
| port_speed = 10000; |
| else |
| port_speed = 1000; |
| port_type = FMAN_PORT_TYPE_TX; |
| |
| } else if (of_device_is_compatible(port_node, "fsl,fman-v3-port-rx")) { |
| port_type = FMAN_PORT_TYPE_RX; |
| port_speed = 1000; |
| if (of_property_read_bool(port_node, "fsl,fman-10g-port")) |
| port_speed = 10000; |
| |
| } else if (of_device_is_compatible(port_node, "fsl,fman-v2-port-rx")) { |
| if (port_id >= RX_10G_PORT_BASE) |
| port_speed = 10000; |
| else |
| port_speed = 1000; |
| port_type = FMAN_PORT_TYPE_RX; |
| |
| } else { |
| dev_err(port->dev, "%s: Illegal port type\n", __func__); |
| err = -EINVAL; |
| goto put_device; |
| } |
| |
| port->dts_params.type = port_type; |
| port->dts_params.speed = port_speed; |
| |
| if (port_type == FMAN_PORT_TYPE_TX) { |
| u32 qman_channel_id; |
| |
| qman_channel_id = fman_get_qman_channel_id(fman, port_id); |
| if (qman_channel_id == 0) { |
| dev_err(port->dev, "%s: incorrect qman-channel-id\n", |
| __func__); |
| err = -EINVAL; |
| goto put_device; |
| } |
| port->dts_params.qman_channel_id = qman_channel_id; |
| } |
| |
| err = of_address_to_resource(port_node, 0, &res); |
| if (err < 0) { |
| dev_err(port->dev, "%s: of_address_to_resource() failed\n", |
| __func__); |
| err = -ENOMEM; |
| goto put_device; |
| } |
| |
| port->dts_params.fman = fman; |
| |
| of_node_put(port_node); |
| |
| dev_res = __devm_request_region(port->dev, &res, res.start, |
| resource_size(&res), "fman-port"); |
| if (!dev_res) { |
| dev_err(port->dev, "%s: __devm_request_region() failed\n", |
| __func__); |
| err = -EINVAL; |
| goto free_port; |
| } |
| |
| port->dts_params.base_addr = devm_ioremap(port->dev, res.start, |
| resource_size(&res)); |
| if (!port->dts_params.base_addr) |
| dev_err(port->dev, "%s: devm_ioremap() failed\n", __func__); |
| |
| dev_set_drvdata(&of_dev->dev, port); |
| |
| return 0; |
| |
| put_device: |
| put_device(&fm_pdev->dev); |
| return_err: |
| of_node_put(port_node); |
| free_port: |
| kfree(port); |
| return err; |
| } |
| |
| static const struct of_device_id fman_port_match[] = { |
| {.compatible = "fsl,fman-v3-port-rx"}, |
| {.compatible = "fsl,fman-v2-port-rx"}, |
| {.compatible = "fsl,fman-v3-port-tx"}, |
| {.compatible = "fsl,fman-v2-port-tx"}, |
| {} |
| }; |
| |
| MODULE_DEVICE_TABLE(of, fman_port_match); |
| |
| static struct platform_driver fman_port_driver = { |
| .driver = { |
| .name = "fsl-fman-port", |
| .of_match_table = fman_port_match, |
| }, |
| .probe = fman_port_probe, |
| }; |
| |
| static int __init fman_port_load(void) |
| { |
| int err; |
| |
| pr_debug("FSL DPAA FMan driver\n"); |
| |
| err = platform_driver_register(&fman_port_driver); |
| if (err < 0) |
| pr_err("Error, platform_driver_register() = %d\n", err); |
| |
| return err; |
| } |
| module_init(fman_port_load); |
| |
| static void __exit fman_port_unload(void) |
| { |
| platform_driver_unregister(&fman_port_driver); |
| } |
| module_exit(fman_port_unload); |
| |
| MODULE_LICENSE("Dual BSD/GPL"); |
| MODULE_DESCRIPTION("Freescale DPAA Frame Manager Port driver"); |