| // SPDX-License-Identifier: GPL-2.0+ |
| |
| #include <linux/types.h> |
| #include <linux/clk.h> |
| #include <linux/platform_device.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/acpi.h> |
| #include <linux/of_mdio.h> |
| #include <linux/of_net.h> |
| #include <linux/etherdevice.h> |
| #include <linux/interrupt.h> |
| #include <linux/io.h> |
| #include <linux/netlink.h> |
| #include <linux/bpf.h> |
| #include <linux/bpf_trace.h> |
| |
| #include <net/tcp.h> |
| #include <net/page_pool/helpers.h> |
| #include <net/ip6_checksum.h> |
| |
| #define NETSEC_REG_SOFT_RST 0x104 |
| #define NETSEC_REG_COM_INIT 0x120 |
| |
| #define NETSEC_REG_TOP_STATUS 0x200 |
| #define NETSEC_IRQ_RX BIT(1) |
| #define NETSEC_IRQ_TX BIT(0) |
| |
| #define NETSEC_REG_TOP_INTEN 0x204 |
| #define NETSEC_REG_INTEN_SET 0x234 |
| #define NETSEC_REG_INTEN_CLR 0x238 |
| |
| #define NETSEC_REG_NRM_TX_STATUS 0x400 |
| #define NETSEC_REG_NRM_TX_INTEN 0x404 |
| #define NETSEC_REG_NRM_TX_INTEN_SET 0x428 |
| #define NETSEC_REG_NRM_TX_INTEN_CLR 0x42c |
| #define NRM_TX_ST_NTOWNR BIT(17) |
| #define NRM_TX_ST_TR_ERR BIT(16) |
| #define NRM_TX_ST_TXDONE BIT(15) |
| #define NRM_TX_ST_TMREXP BIT(14) |
| |
| #define NETSEC_REG_NRM_RX_STATUS 0x440 |
| #define NETSEC_REG_NRM_RX_INTEN 0x444 |
| #define NETSEC_REG_NRM_RX_INTEN_SET 0x468 |
| #define NETSEC_REG_NRM_RX_INTEN_CLR 0x46c |
| #define NRM_RX_ST_RC_ERR BIT(16) |
| #define NRM_RX_ST_PKTCNT BIT(15) |
| #define NRM_RX_ST_TMREXP BIT(14) |
| |
| #define NETSEC_REG_PKT_CMD_BUF 0xd0 |
| |
| #define NETSEC_REG_CLK_EN 0x100 |
| |
| #define NETSEC_REG_PKT_CTRL 0x140 |
| |
| #define NETSEC_REG_DMA_TMR_CTRL 0x20c |
| #define NETSEC_REG_F_TAIKI_MC_VER 0x22c |
| #define NETSEC_REG_F_TAIKI_VER 0x230 |
| #define NETSEC_REG_DMA_HM_CTRL 0x214 |
| #define NETSEC_REG_DMA_MH_CTRL 0x220 |
| #define NETSEC_REG_ADDR_DIS_CORE 0x218 |
| #define NETSEC_REG_DMAC_HM_CMD_BUF 0x210 |
| #define NETSEC_REG_DMAC_MH_CMD_BUF 0x21c |
| |
| #define NETSEC_REG_NRM_TX_PKTCNT 0x410 |
| |
| #define NETSEC_REG_NRM_TX_DONE_PKTCNT 0x414 |
| #define NETSEC_REG_NRM_TX_DONE_TXINT_PKTCNT 0x418 |
| |
| #define NETSEC_REG_NRM_TX_TMR 0x41c |
| |
| #define NETSEC_REG_NRM_RX_PKTCNT 0x454 |
| #define NETSEC_REG_NRM_RX_RXINT_PKTCNT 0x458 |
| #define NETSEC_REG_NRM_TX_TXINT_TMR 0x420 |
| #define NETSEC_REG_NRM_RX_RXINT_TMR 0x460 |
| |
| #define NETSEC_REG_NRM_RX_TMR 0x45c |
| |
| #define NETSEC_REG_NRM_TX_DESC_START_UP 0x434 |
| #define NETSEC_REG_NRM_TX_DESC_START_LW 0x408 |
| #define NETSEC_REG_NRM_RX_DESC_START_UP 0x474 |
| #define NETSEC_REG_NRM_RX_DESC_START_LW 0x448 |
| |
| #define NETSEC_REG_NRM_TX_CONFIG 0x430 |
| #define NETSEC_REG_NRM_RX_CONFIG 0x470 |
| |
| #define MAC_REG_STATUS 0x1024 |
| #define MAC_REG_DATA 0x11c0 |
| #define MAC_REG_CMD 0x11c4 |
| #define MAC_REG_FLOW_TH 0x11cc |
| #define MAC_REG_INTF_SEL 0x11d4 |
| #define MAC_REG_DESC_INIT 0x11fc |
| #define MAC_REG_DESC_SOFT_RST 0x1204 |
| #define NETSEC_REG_MODE_TRANS_COMP_STATUS 0x500 |
| |
| #define GMAC_REG_MCR 0x0000 |
| #define GMAC_REG_MFFR 0x0004 |
| #define GMAC_REG_GAR 0x0010 |
| #define GMAC_REG_GDR 0x0014 |
| #define GMAC_REG_FCR 0x0018 |
| #define GMAC_REG_BMR 0x1000 |
| #define GMAC_REG_RDLAR 0x100c |
| #define GMAC_REG_TDLAR 0x1010 |
| #define GMAC_REG_OMR 0x1018 |
| |
| #define MHZ(n) ((n) * 1000 * 1000) |
| |
| #define NETSEC_TX_SHIFT_OWN_FIELD 31 |
| #define NETSEC_TX_SHIFT_LD_FIELD 30 |
| #define NETSEC_TX_SHIFT_DRID_FIELD 24 |
| #define NETSEC_TX_SHIFT_PT_FIELD 21 |
| #define NETSEC_TX_SHIFT_TDRID_FIELD 16 |
| #define NETSEC_TX_SHIFT_CC_FIELD 15 |
| #define NETSEC_TX_SHIFT_FS_FIELD 9 |
| #define NETSEC_TX_LAST 8 |
| #define NETSEC_TX_SHIFT_CO 7 |
| #define NETSEC_TX_SHIFT_SO 6 |
| #define NETSEC_TX_SHIFT_TRS_FIELD 4 |
| |
| #define NETSEC_RX_PKT_OWN_FIELD 31 |
| #define NETSEC_RX_PKT_LD_FIELD 30 |
| #define NETSEC_RX_PKT_SDRID_FIELD 24 |
| #define NETSEC_RX_PKT_FR_FIELD 23 |
| #define NETSEC_RX_PKT_ER_FIELD 21 |
| #define NETSEC_RX_PKT_ERR_FIELD 16 |
| #define NETSEC_RX_PKT_TDRID_FIELD 12 |
| #define NETSEC_RX_PKT_FS_FIELD 9 |
| #define NETSEC_RX_PKT_LS_FIELD 8 |
| #define NETSEC_RX_PKT_CO_FIELD 6 |
| |
| #define NETSEC_RX_PKT_ERR_MASK 3 |
| |
| #define NETSEC_MAX_TX_PKT_LEN 1518 |
| #define NETSEC_MAX_TX_JUMBO_PKT_LEN 9018 |
| |
| #define NETSEC_RING_GMAC 15 |
| #define NETSEC_RING_MAX 2 |
| |
| #define NETSEC_TCP_SEG_LEN_MAX 1460 |
| #define NETSEC_TCP_JUMBO_SEG_LEN_MAX 8960 |
| |
| #define NETSEC_RX_CKSUM_NOTAVAIL 0 |
| #define NETSEC_RX_CKSUM_OK 1 |
| #define NETSEC_RX_CKSUM_NG 2 |
| |
| #define NETSEC_TOP_IRQ_REG_CODE_LOAD_END BIT(20) |
| #define NETSEC_IRQ_TRANSITION_COMPLETE BIT(4) |
| |
| #define NETSEC_MODE_TRANS_COMP_IRQ_N2T BIT(20) |
| #define NETSEC_MODE_TRANS_COMP_IRQ_T2N BIT(19) |
| |
| #define NETSEC_INT_PKTCNT_MAX 2047 |
| |
| #define NETSEC_FLOW_START_TH_MAX 95 |
| #define NETSEC_FLOW_STOP_TH_MAX 95 |
| #define NETSEC_FLOW_PAUSE_TIME_MIN 5 |
| |
| #define NETSEC_CLK_EN_REG_DOM_ALL 0x3f |
| |
| #define NETSEC_PKT_CTRL_REG_MODE_NRM BIT(28) |
| #define NETSEC_PKT_CTRL_REG_EN_JUMBO BIT(27) |
| #define NETSEC_PKT_CTRL_REG_LOG_CHKSUM_ER BIT(3) |
| #define NETSEC_PKT_CTRL_REG_LOG_HD_INCOMPLETE BIT(2) |
| #define NETSEC_PKT_CTRL_REG_LOG_HD_ER BIT(1) |
| #define NETSEC_PKT_CTRL_REG_DRP_NO_MATCH BIT(0) |
| |
| #define NETSEC_CLK_EN_REG_DOM_G BIT(5) |
| #define NETSEC_CLK_EN_REG_DOM_C BIT(1) |
| #define NETSEC_CLK_EN_REG_DOM_D BIT(0) |
| |
| #define NETSEC_COM_INIT_REG_DB BIT(2) |
| #define NETSEC_COM_INIT_REG_CLS BIT(1) |
| #define NETSEC_COM_INIT_REG_ALL (NETSEC_COM_INIT_REG_CLS | \ |
| NETSEC_COM_INIT_REG_DB) |
| |
| #define NETSEC_SOFT_RST_REG_RESET 0 |
| #define NETSEC_SOFT_RST_REG_RUN BIT(31) |
| |
| #define NETSEC_DMA_CTRL_REG_STOP 1 |
| #define MH_CTRL__MODE_TRANS BIT(20) |
| |
| #define NETSEC_GMAC_CMD_ST_READ 0 |
| #define NETSEC_GMAC_CMD_ST_WRITE BIT(28) |
| #define NETSEC_GMAC_CMD_ST_BUSY BIT(31) |
| |
| #define NETSEC_GMAC_BMR_REG_COMMON 0x00412080 |
| #define NETSEC_GMAC_BMR_REG_RESET 0x00020181 |
| #define NETSEC_GMAC_BMR_REG_SWR 0x00000001 |
| |
| #define NETSEC_GMAC_OMR_REG_ST BIT(13) |
| #define NETSEC_GMAC_OMR_REG_SR BIT(1) |
| |
| #define NETSEC_GMAC_MCR_REG_IBN BIT(30) |
| #define NETSEC_GMAC_MCR_REG_CST BIT(25) |
| #define NETSEC_GMAC_MCR_REG_JE BIT(20) |
| #define NETSEC_MCR_PS BIT(15) |
| #define NETSEC_GMAC_MCR_REG_FES BIT(14) |
| #define NETSEC_GMAC_MCR_REG_FULL_DUPLEX_COMMON 0x0000280c |
| #define NETSEC_GMAC_MCR_REG_HALF_DUPLEX_COMMON 0x0001a00c |
| |
| #define NETSEC_FCR_RFE BIT(2) |
| #define NETSEC_FCR_TFE BIT(1) |
| |
| #define NETSEC_GMAC_GAR_REG_GW BIT(1) |
| #define NETSEC_GMAC_GAR_REG_GB BIT(0) |
| |
| #define NETSEC_GMAC_GAR_REG_SHIFT_PA 11 |
| #define NETSEC_GMAC_GAR_REG_SHIFT_GR 6 |
| #define GMAC_REG_SHIFT_CR_GAR 2 |
| |
| #define NETSEC_GMAC_GAR_REG_CR_25_35_MHZ 2 |
| #define NETSEC_GMAC_GAR_REG_CR_35_60_MHZ 3 |
| #define NETSEC_GMAC_GAR_REG_CR_60_100_MHZ 0 |
| #define NETSEC_GMAC_GAR_REG_CR_100_150_MHZ 1 |
| #define NETSEC_GMAC_GAR_REG_CR_150_250_MHZ 4 |
| #define NETSEC_GMAC_GAR_REG_CR_250_300_MHZ 5 |
| |
| #define NETSEC_GMAC_RDLAR_REG_COMMON 0x18000 |
| #define NETSEC_GMAC_TDLAR_REG_COMMON 0x1c000 |
| |
| #define NETSEC_REG_NETSEC_VER_F_TAIKI 0x50000 |
| |
| #define NETSEC_REG_DESC_RING_CONFIG_CFG_UP BIT(31) |
| #define NETSEC_REG_DESC_RING_CONFIG_CH_RST BIT(30) |
| #define NETSEC_REG_DESC_TMR_MODE 4 |
| #define NETSEC_REG_DESC_ENDIAN 0 |
| |
| #define NETSEC_MAC_DESC_SOFT_RST_SOFT_RST 1 |
| #define NETSEC_MAC_DESC_INIT_REG_INIT 1 |
| |
| #define NETSEC_EEPROM_MAC_ADDRESS 0x00 |
| #define NETSEC_EEPROM_HM_ME_ADDRESS_H 0x08 |
| #define NETSEC_EEPROM_HM_ME_ADDRESS_L 0x0C |
| #define NETSEC_EEPROM_HM_ME_SIZE 0x10 |
| #define NETSEC_EEPROM_MH_ME_ADDRESS_H 0x14 |
| #define NETSEC_EEPROM_MH_ME_ADDRESS_L 0x18 |
| #define NETSEC_EEPROM_MH_ME_SIZE 0x1C |
| #define NETSEC_EEPROM_PKT_ME_ADDRESS 0x20 |
| #define NETSEC_EEPROM_PKT_ME_SIZE 0x24 |
| |
| #define DESC_NUM 256 |
| |
| #define NETSEC_SKB_PAD (NET_SKB_PAD + NET_IP_ALIGN) |
| #define NETSEC_RXBUF_HEADROOM (max(XDP_PACKET_HEADROOM, NET_SKB_PAD) + \ |
| NET_IP_ALIGN) |
| #define NETSEC_RX_BUF_NON_DATA (NETSEC_RXBUF_HEADROOM + \ |
| SKB_DATA_ALIGN(sizeof(struct skb_shared_info))) |
| #define NETSEC_RX_BUF_SIZE (PAGE_SIZE - NETSEC_RX_BUF_NON_DATA) |
| |
| #define DESC_SZ sizeof(struct netsec_de) |
| |
| #define NETSEC_F_NETSEC_VER_MAJOR_NUM(x) ((x) & 0xffff0000) |
| |
| #define NETSEC_XDP_PASS 0 |
| #define NETSEC_XDP_CONSUMED BIT(0) |
| #define NETSEC_XDP_TX BIT(1) |
| #define NETSEC_XDP_REDIR BIT(2) |
| |
| enum ring_id { |
| NETSEC_RING_TX = 0, |
| NETSEC_RING_RX |
| }; |
| |
| enum buf_type { |
| TYPE_NETSEC_SKB = 0, |
| TYPE_NETSEC_XDP_TX, |
| TYPE_NETSEC_XDP_NDO, |
| }; |
| |
| struct netsec_desc { |
| union { |
| struct sk_buff *skb; |
| struct xdp_frame *xdpf; |
| }; |
| dma_addr_t dma_addr; |
| void *addr; |
| u16 len; |
| u8 buf_type; |
| }; |
| |
| struct netsec_desc_ring { |
| dma_addr_t desc_dma; |
| struct netsec_desc *desc; |
| void *vaddr; |
| u16 head, tail; |
| u16 xdp_xmit; /* netsec_xdp_xmit packets */ |
| struct page_pool *page_pool; |
| struct xdp_rxq_info xdp_rxq; |
| spinlock_t lock; /* XDP tx queue locking */ |
| }; |
| |
| struct netsec_priv { |
| struct netsec_desc_ring desc_ring[NETSEC_RING_MAX]; |
| struct ethtool_coalesce et_coalesce; |
| struct bpf_prog *xdp_prog; |
| spinlock_t reglock; /* protect reg access */ |
| struct napi_struct napi; |
| phy_interface_t phy_interface; |
| struct net_device *ndev; |
| struct device_node *phy_np; |
| struct phy_device *phydev; |
| struct mii_bus *mii_bus; |
| void __iomem *ioaddr; |
| void __iomem *eeprom_base; |
| struct device *dev; |
| struct clk *clk; |
| u32 msg_enable; |
| u32 freq; |
| u32 phy_addr; |
| bool rx_cksum_offload_flag; |
| }; |
| |
| struct netsec_de { /* Netsec Descriptor layout */ |
| u32 attr; |
| u32 data_buf_addr_up; |
| u32 data_buf_addr_lw; |
| u32 buf_len_info; |
| }; |
| |
| struct netsec_tx_pkt_ctrl { |
| u16 tcp_seg_len; |
| bool tcp_seg_offload_flag; |
| bool cksum_offload_flag; |
| }; |
| |
| struct netsec_rx_pkt_info { |
| int rx_cksum_result; |
| int err_code; |
| bool err_flag; |
| }; |
| |
| static void netsec_write(struct netsec_priv *priv, u32 reg_addr, u32 val) |
| { |
| writel(val, priv->ioaddr + reg_addr); |
| } |
| |
| static u32 netsec_read(struct netsec_priv *priv, u32 reg_addr) |
| { |
| return readl(priv->ioaddr + reg_addr); |
| } |
| |
| /************* MDIO BUS OPS FOLLOW *************/ |
| |
| #define TIMEOUT_SPINS_MAC 1000 |
| #define TIMEOUT_SECONDARY_MS_MAC 100 |
| |
| static u32 netsec_clk_type(u32 freq) |
| { |
| if (freq < MHZ(35)) |
| return NETSEC_GMAC_GAR_REG_CR_25_35_MHZ; |
| if (freq < MHZ(60)) |
| return NETSEC_GMAC_GAR_REG_CR_35_60_MHZ; |
| if (freq < MHZ(100)) |
| return NETSEC_GMAC_GAR_REG_CR_60_100_MHZ; |
| if (freq < MHZ(150)) |
| return NETSEC_GMAC_GAR_REG_CR_100_150_MHZ; |
| if (freq < MHZ(250)) |
| return NETSEC_GMAC_GAR_REG_CR_150_250_MHZ; |
| |
| return NETSEC_GMAC_GAR_REG_CR_250_300_MHZ; |
| } |
| |
| static int netsec_wait_while_busy(struct netsec_priv *priv, u32 addr, u32 mask) |
| { |
| u32 timeout = TIMEOUT_SPINS_MAC; |
| |
| while (--timeout && netsec_read(priv, addr) & mask) |
| cpu_relax(); |
| if (timeout) |
| return 0; |
| |
| timeout = TIMEOUT_SECONDARY_MS_MAC; |
| while (--timeout && netsec_read(priv, addr) & mask) |
| usleep_range(1000, 2000); |
| |
| if (timeout) |
| return 0; |
| |
| netdev_WARN(priv->ndev, "%s: timeout\n", __func__); |
| |
| return -ETIMEDOUT; |
| } |
| |
| static int netsec_mac_write(struct netsec_priv *priv, u32 addr, u32 value) |
| { |
| netsec_write(priv, MAC_REG_DATA, value); |
| netsec_write(priv, MAC_REG_CMD, addr | NETSEC_GMAC_CMD_ST_WRITE); |
| return netsec_wait_while_busy(priv, |
| MAC_REG_CMD, NETSEC_GMAC_CMD_ST_BUSY); |
| } |
| |
| static int netsec_mac_read(struct netsec_priv *priv, u32 addr, u32 *read) |
| { |
| int ret; |
| |
| netsec_write(priv, MAC_REG_CMD, addr | NETSEC_GMAC_CMD_ST_READ); |
| ret = netsec_wait_while_busy(priv, |
| MAC_REG_CMD, NETSEC_GMAC_CMD_ST_BUSY); |
| if (ret) |
| return ret; |
| |
| *read = netsec_read(priv, MAC_REG_DATA); |
| |
| return 0; |
| } |
| |
| static int netsec_mac_wait_while_busy(struct netsec_priv *priv, |
| u32 addr, u32 mask) |
| { |
| u32 timeout = TIMEOUT_SPINS_MAC; |
| int ret, data; |
| |
| do { |
| ret = netsec_mac_read(priv, addr, &data); |
| if (ret) |
| break; |
| cpu_relax(); |
| } while (--timeout && (data & mask)); |
| |
| if (timeout) |
| return 0; |
| |
| timeout = TIMEOUT_SECONDARY_MS_MAC; |
| do { |
| usleep_range(1000, 2000); |
| |
| ret = netsec_mac_read(priv, addr, &data); |
| if (ret) |
| break; |
| cpu_relax(); |
| } while (--timeout && (data & mask)); |
| |
| if (timeout && !ret) |
| return 0; |
| |
| netdev_WARN(priv->ndev, "%s: timeout\n", __func__); |
| |
| return -ETIMEDOUT; |
| } |
| |
| static int netsec_mac_update_to_phy_state(struct netsec_priv *priv) |
| { |
| struct phy_device *phydev = priv->ndev->phydev; |
| u32 value = 0; |
| |
| value = phydev->duplex ? NETSEC_GMAC_MCR_REG_FULL_DUPLEX_COMMON : |
| NETSEC_GMAC_MCR_REG_HALF_DUPLEX_COMMON; |
| |
| if (phydev->speed != SPEED_1000) |
| value |= NETSEC_MCR_PS; |
| |
| if (priv->phy_interface != PHY_INTERFACE_MODE_GMII && |
| phydev->speed == SPEED_100) |
| value |= NETSEC_GMAC_MCR_REG_FES; |
| |
| value |= NETSEC_GMAC_MCR_REG_CST | NETSEC_GMAC_MCR_REG_JE; |
| |
| if (phy_interface_mode_is_rgmii(priv->phy_interface)) |
| value |= NETSEC_GMAC_MCR_REG_IBN; |
| |
| if (netsec_mac_write(priv, GMAC_REG_MCR, value)) |
| return -ETIMEDOUT; |
| |
| return 0; |
| } |
| |
| static int netsec_phy_read(struct mii_bus *bus, int phy_addr, int reg_addr); |
| |
| static int netsec_phy_write(struct mii_bus *bus, |
| int phy_addr, int reg, u16 val) |
| { |
| int status; |
| struct netsec_priv *priv = bus->priv; |
| |
| if (netsec_mac_write(priv, GMAC_REG_GDR, val)) |
| return -ETIMEDOUT; |
| if (netsec_mac_write(priv, GMAC_REG_GAR, |
| phy_addr << NETSEC_GMAC_GAR_REG_SHIFT_PA | |
| reg << NETSEC_GMAC_GAR_REG_SHIFT_GR | |
| NETSEC_GMAC_GAR_REG_GW | NETSEC_GMAC_GAR_REG_GB | |
| (netsec_clk_type(priv->freq) << |
| GMAC_REG_SHIFT_CR_GAR))) |
| return -ETIMEDOUT; |
| |
| status = netsec_mac_wait_while_busy(priv, GMAC_REG_GAR, |
| NETSEC_GMAC_GAR_REG_GB); |
| |
| /* Developerbox implements RTL8211E PHY and there is |
| * a compatibility problem with F_GMAC4. |
| * RTL8211E expects MDC clock must be kept toggling for several |
| * clock cycle with MDIO high before entering the IDLE state. |
| * To meet this requirement, netsec driver needs to issue dummy |
| * read(e.g. read PHYID1(offset 0x2) register) right after write. |
| */ |
| netsec_phy_read(bus, phy_addr, MII_PHYSID1); |
| |
| return status; |
| } |
| |
| static int netsec_phy_read(struct mii_bus *bus, int phy_addr, int reg_addr) |
| { |
| struct netsec_priv *priv = bus->priv; |
| u32 data; |
| int ret; |
| |
| if (netsec_mac_write(priv, GMAC_REG_GAR, NETSEC_GMAC_GAR_REG_GB | |
| phy_addr << NETSEC_GMAC_GAR_REG_SHIFT_PA | |
| reg_addr << NETSEC_GMAC_GAR_REG_SHIFT_GR | |
| (netsec_clk_type(priv->freq) << |
| GMAC_REG_SHIFT_CR_GAR))) |
| return -ETIMEDOUT; |
| |
| ret = netsec_mac_wait_while_busy(priv, GMAC_REG_GAR, |
| NETSEC_GMAC_GAR_REG_GB); |
| if (ret) |
| return ret; |
| |
| ret = netsec_mac_read(priv, GMAC_REG_GDR, &data); |
| if (ret) |
| return ret; |
| |
| return data; |
| } |
| |
| /************* ETHTOOL_OPS FOLLOW *************/ |
| |
| static void netsec_et_get_drvinfo(struct net_device *net_device, |
| struct ethtool_drvinfo *info) |
| { |
| strscpy(info->driver, "netsec", sizeof(info->driver)); |
| strscpy(info->bus_info, dev_name(net_device->dev.parent), |
| sizeof(info->bus_info)); |
| } |
| |
| static int netsec_et_get_coalesce(struct net_device *net_device, |
| struct ethtool_coalesce *et_coalesce, |
| struct kernel_ethtool_coalesce *kernel_coal, |
| struct netlink_ext_ack *extack) |
| { |
| struct netsec_priv *priv = netdev_priv(net_device); |
| |
| *et_coalesce = priv->et_coalesce; |
| |
| return 0; |
| } |
| |
| static int netsec_et_set_coalesce(struct net_device *net_device, |
| struct ethtool_coalesce *et_coalesce, |
| struct kernel_ethtool_coalesce *kernel_coal, |
| struct netlink_ext_ack *extack) |
| { |
| struct netsec_priv *priv = netdev_priv(net_device); |
| |
| priv->et_coalesce = *et_coalesce; |
| |
| if (priv->et_coalesce.tx_coalesce_usecs < 50) |
| priv->et_coalesce.tx_coalesce_usecs = 50; |
| if (priv->et_coalesce.tx_max_coalesced_frames < 1) |
| priv->et_coalesce.tx_max_coalesced_frames = 1; |
| |
| netsec_write(priv, NETSEC_REG_NRM_TX_DONE_TXINT_PKTCNT, |
| priv->et_coalesce.tx_max_coalesced_frames); |
| netsec_write(priv, NETSEC_REG_NRM_TX_TXINT_TMR, |
| priv->et_coalesce.tx_coalesce_usecs); |
| netsec_write(priv, NETSEC_REG_NRM_TX_INTEN_SET, NRM_TX_ST_TXDONE); |
| netsec_write(priv, NETSEC_REG_NRM_TX_INTEN_SET, NRM_TX_ST_TMREXP); |
| |
| if (priv->et_coalesce.rx_coalesce_usecs < 50) |
| priv->et_coalesce.rx_coalesce_usecs = 50; |
| if (priv->et_coalesce.rx_max_coalesced_frames < 1) |
| priv->et_coalesce.rx_max_coalesced_frames = 1; |
| |
| netsec_write(priv, NETSEC_REG_NRM_RX_RXINT_PKTCNT, |
| priv->et_coalesce.rx_max_coalesced_frames); |
| netsec_write(priv, NETSEC_REG_NRM_RX_RXINT_TMR, |
| priv->et_coalesce.rx_coalesce_usecs); |
| netsec_write(priv, NETSEC_REG_NRM_RX_INTEN_SET, NRM_RX_ST_PKTCNT); |
| netsec_write(priv, NETSEC_REG_NRM_RX_INTEN_SET, NRM_RX_ST_TMREXP); |
| |
| return 0; |
| } |
| |
| static u32 netsec_et_get_msglevel(struct net_device *dev) |
| { |
| struct netsec_priv *priv = netdev_priv(dev); |
| |
| return priv->msg_enable; |
| } |
| |
| static void netsec_et_set_msglevel(struct net_device *dev, u32 datum) |
| { |
| struct netsec_priv *priv = netdev_priv(dev); |
| |
| priv->msg_enable = datum; |
| } |
| |
| static const struct ethtool_ops netsec_ethtool_ops = { |
| .supported_coalesce_params = ETHTOOL_COALESCE_USECS | |
| ETHTOOL_COALESCE_MAX_FRAMES, |
| .get_drvinfo = netsec_et_get_drvinfo, |
| .get_link_ksettings = phy_ethtool_get_link_ksettings, |
| .set_link_ksettings = phy_ethtool_set_link_ksettings, |
| .get_link = ethtool_op_get_link, |
| .get_coalesce = netsec_et_get_coalesce, |
| .set_coalesce = netsec_et_set_coalesce, |
| .get_msglevel = netsec_et_get_msglevel, |
| .set_msglevel = netsec_et_set_msglevel, |
| }; |
| |
| /************* NETDEV_OPS FOLLOW *************/ |
| |
| |
| static void netsec_set_rx_de(struct netsec_priv *priv, |
| struct netsec_desc_ring *dring, u16 idx, |
| const struct netsec_desc *desc) |
| { |
| struct netsec_de *de = dring->vaddr + DESC_SZ * idx; |
| u32 attr = (1 << NETSEC_RX_PKT_OWN_FIELD) | |
| (1 << NETSEC_RX_PKT_FS_FIELD) | |
| (1 << NETSEC_RX_PKT_LS_FIELD); |
| |
| if (idx == DESC_NUM - 1) |
| attr |= (1 << NETSEC_RX_PKT_LD_FIELD); |
| |
| de->data_buf_addr_up = upper_32_bits(desc->dma_addr); |
| de->data_buf_addr_lw = lower_32_bits(desc->dma_addr); |
| de->buf_len_info = desc->len; |
| de->attr = attr; |
| dma_wmb(); |
| |
| dring->desc[idx].dma_addr = desc->dma_addr; |
| dring->desc[idx].addr = desc->addr; |
| dring->desc[idx].len = desc->len; |
| } |
| |
| static bool netsec_clean_tx_dring(struct netsec_priv *priv) |
| { |
| struct netsec_desc_ring *dring = &priv->desc_ring[NETSEC_RING_TX]; |
| struct xdp_frame_bulk bq; |
| struct netsec_de *entry; |
| int tail = dring->tail; |
| unsigned int bytes; |
| int cnt = 0; |
| |
| spin_lock(&dring->lock); |
| |
| bytes = 0; |
| xdp_frame_bulk_init(&bq); |
| entry = dring->vaddr + DESC_SZ * tail; |
| |
| rcu_read_lock(); /* need for xdp_return_frame_bulk */ |
| |
| while (!(entry->attr & (1U << NETSEC_TX_SHIFT_OWN_FIELD)) && |
| cnt < DESC_NUM) { |
| struct netsec_desc *desc; |
| int eop; |
| |
| desc = &dring->desc[tail]; |
| eop = (entry->attr >> NETSEC_TX_LAST) & 1; |
| dma_rmb(); |
| |
| /* if buf_type is either TYPE_NETSEC_SKB or |
| * TYPE_NETSEC_XDP_NDO we mapped it |
| */ |
| if (desc->buf_type != TYPE_NETSEC_XDP_TX) |
| dma_unmap_single(priv->dev, desc->dma_addr, desc->len, |
| DMA_TO_DEVICE); |
| |
| if (!eop) |
| goto next; |
| |
| if (desc->buf_type == TYPE_NETSEC_SKB) { |
| bytes += desc->skb->len; |
| dev_kfree_skb(desc->skb); |
| } else { |
| bytes += desc->xdpf->len; |
| if (desc->buf_type == TYPE_NETSEC_XDP_TX) |
| xdp_return_frame_rx_napi(desc->xdpf); |
| else |
| xdp_return_frame_bulk(desc->xdpf, &bq); |
| } |
| next: |
| /* clean up so netsec_uninit_pkt_dring() won't free the skb |
| * again |
| */ |
| *desc = (struct netsec_desc){}; |
| |
| /* entry->attr is not going to be accessed by the NIC until |
| * netsec_set_tx_de() is called. No need for a dma_wmb() here |
| */ |
| entry->attr = 1U << NETSEC_TX_SHIFT_OWN_FIELD; |
| /* move tail ahead */ |
| dring->tail = (tail + 1) % DESC_NUM; |
| |
| tail = dring->tail; |
| entry = dring->vaddr + DESC_SZ * tail; |
| cnt++; |
| } |
| xdp_flush_frame_bulk(&bq); |
| |
| rcu_read_unlock(); |
| |
| spin_unlock(&dring->lock); |
| |
| if (!cnt) |
| return false; |
| |
| /* reading the register clears the irq */ |
| netsec_read(priv, NETSEC_REG_NRM_TX_DONE_PKTCNT); |
| |
| priv->ndev->stats.tx_packets += cnt; |
| priv->ndev->stats.tx_bytes += bytes; |
| |
| netdev_completed_queue(priv->ndev, cnt, bytes); |
| |
| return true; |
| } |
| |
| static void netsec_process_tx(struct netsec_priv *priv) |
| { |
| struct net_device *ndev = priv->ndev; |
| bool cleaned; |
| |
| cleaned = netsec_clean_tx_dring(priv); |
| |
| if (cleaned && netif_queue_stopped(ndev)) { |
| /* Make sure we update the value, anyone stopping the queue |
| * after this will read the proper consumer idx |
| */ |
| smp_wmb(); |
| netif_wake_queue(ndev); |
| } |
| } |
| |
| static void *netsec_alloc_rx_data(struct netsec_priv *priv, |
| dma_addr_t *dma_handle, u16 *desc_len) |
| |
| { |
| |
| struct netsec_desc_ring *dring = &priv->desc_ring[NETSEC_RING_RX]; |
| struct page *page; |
| |
| page = page_pool_dev_alloc_pages(dring->page_pool); |
| if (!page) |
| return NULL; |
| |
| /* We allocate the same buffer length for XDP and non-XDP cases. |
| * page_pool API will map the whole page, skip what's needed for |
| * network payloads and/or XDP |
| */ |
| *dma_handle = page_pool_get_dma_addr(page) + NETSEC_RXBUF_HEADROOM; |
| /* Make sure the incoming payload fits in the page for XDP and non-XDP |
| * cases and reserve enough space for headroom + skb_shared_info |
| */ |
| *desc_len = NETSEC_RX_BUF_SIZE; |
| |
| return page_address(page); |
| } |
| |
| static void netsec_rx_fill(struct netsec_priv *priv, u16 from, u16 num) |
| { |
| struct netsec_desc_ring *dring = &priv->desc_ring[NETSEC_RING_RX]; |
| u16 idx = from; |
| |
| while (num) { |
| netsec_set_rx_de(priv, dring, idx, &dring->desc[idx]); |
| idx++; |
| if (idx >= DESC_NUM) |
| idx = 0; |
| num--; |
| } |
| } |
| |
| static void netsec_xdp_ring_tx_db(struct netsec_priv *priv, u16 pkts) |
| { |
| if (likely(pkts)) |
| netsec_write(priv, NETSEC_REG_NRM_TX_PKTCNT, pkts); |
| } |
| |
| static void netsec_finalize_xdp_rx(struct netsec_priv *priv, u32 xdp_res, |
| u16 pkts) |
| { |
| if (xdp_res & NETSEC_XDP_REDIR) |
| xdp_do_flush(); |
| |
| if (xdp_res & NETSEC_XDP_TX) |
| netsec_xdp_ring_tx_db(priv, pkts); |
| } |
| |
| static void netsec_set_tx_de(struct netsec_priv *priv, |
| struct netsec_desc_ring *dring, |
| const struct netsec_tx_pkt_ctrl *tx_ctrl, |
| const struct netsec_desc *desc, void *buf) |
| { |
| int idx = dring->head; |
| struct netsec_de *de; |
| u32 attr; |
| |
| de = dring->vaddr + (DESC_SZ * idx); |
| |
| attr = (1 << NETSEC_TX_SHIFT_OWN_FIELD) | |
| (1 << NETSEC_TX_SHIFT_PT_FIELD) | |
| (NETSEC_RING_GMAC << NETSEC_TX_SHIFT_TDRID_FIELD) | |
| (1 << NETSEC_TX_SHIFT_FS_FIELD) | |
| (1 << NETSEC_TX_LAST) | |
| (tx_ctrl->cksum_offload_flag << NETSEC_TX_SHIFT_CO) | |
| (tx_ctrl->tcp_seg_offload_flag << NETSEC_TX_SHIFT_SO) | |
| (1 << NETSEC_TX_SHIFT_TRS_FIELD); |
| if (idx == DESC_NUM - 1) |
| attr |= (1 << NETSEC_TX_SHIFT_LD_FIELD); |
| |
| de->data_buf_addr_up = upper_32_bits(desc->dma_addr); |
| de->data_buf_addr_lw = lower_32_bits(desc->dma_addr); |
| de->buf_len_info = (tx_ctrl->tcp_seg_len << 16) | desc->len; |
| de->attr = attr; |
| |
| dring->desc[idx] = *desc; |
| if (desc->buf_type == TYPE_NETSEC_SKB) |
| dring->desc[idx].skb = buf; |
| else if (desc->buf_type == TYPE_NETSEC_XDP_TX || |
| desc->buf_type == TYPE_NETSEC_XDP_NDO) |
| dring->desc[idx].xdpf = buf; |
| |
| /* move head ahead */ |
| dring->head = (dring->head + 1) % DESC_NUM; |
| } |
| |
| /* The current driver only supports 1 Txq, this should run under spin_lock() */ |
| static u32 netsec_xdp_queue_one(struct netsec_priv *priv, |
| struct xdp_frame *xdpf, bool is_ndo) |
| |
| { |
| struct netsec_desc_ring *tx_ring = &priv->desc_ring[NETSEC_RING_TX]; |
| struct page *page = virt_to_page(xdpf->data); |
| struct netsec_tx_pkt_ctrl tx_ctrl = {}; |
| struct netsec_desc tx_desc; |
| dma_addr_t dma_handle; |
| u16 filled; |
| |
| if (tx_ring->head >= tx_ring->tail) |
| filled = tx_ring->head - tx_ring->tail; |
| else |
| filled = tx_ring->head + DESC_NUM - tx_ring->tail; |
| |
| if (DESC_NUM - filled <= 1) |
| return NETSEC_XDP_CONSUMED; |
| |
| if (is_ndo) { |
| /* this is for ndo_xdp_xmit, the buffer needs mapping before |
| * sending |
| */ |
| dma_handle = dma_map_single(priv->dev, xdpf->data, xdpf->len, |
| DMA_TO_DEVICE); |
| if (dma_mapping_error(priv->dev, dma_handle)) |
| return NETSEC_XDP_CONSUMED; |
| tx_desc.buf_type = TYPE_NETSEC_XDP_NDO; |
| } else { |
| /* This is the device Rx buffer from page_pool. No need to remap |
| * just sync and send it |
| */ |
| struct netsec_desc_ring *rx_ring = |
| &priv->desc_ring[NETSEC_RING_RX]; |
| enum dma_data_direction dma_dir = |
| page_pool_get_dma_dir(rx_ring->page_pool); |
| |
| dma_handle = page_pool_get_dma_addr(page) + xdpf->headroom + |
| sizeof(*xdpf); |
| dma_sync_single_for_device(priv->dev, dma_handle, xdpf->len, |
| dma_dir); |
| tx_desc.buf_type = TYPE_NETSEC_XDP_TX; |
| } |
| |
| tx_desc.dma_addr = dma_handle; |
| tx_desc.addr = xdpf->data; |
| tx_desc.len = xdpf->len; |
| |
| netdev_sent_queue(priv->ndev, xdpf->len); |
| netsec_set_tx_de(priv, tx_ring, &tx_ctrl, &tx_desc, xdpf); |
| |
| return NETSEC_XDP_TX; |
| } |
| |
| static u32 netsec_xdp_xmit_back(struct netsec_priv *priv, struct xdp_buff *xdp) |
| { |
| struct netsec_desc_ring *tx_ring = &priv->desc_ring[NETSEC_RING_TX]; |
| struct xdp_frame *xdpf = xdp_convert_buff_to_frame(xdp); |
| u32 ret; |
| |
| if (unlikely(!xdpf)) |
| return NETSEC_XDP_CONSUMED; |
| |
| spin_lock(&tx_ring->lock); |
| ret = netsec_xdp_queue_one(priv, xdpf, false); |
| spin_unlock(&tx_ring->lock); |
| |
| return ret; |
| } |
| |
| static u32 netsec_run_xdp(struct netsec_priv *priv, struct bpf_prog *prog, |
| struct xdp_buff *xdp) |
| { |
| struct netsec_desc_ring *dring = &priv->desc_ring[NETSEC_RING_RX]; |
| unsigned int sync, len = xdp->data_end - xdp->data; |
| u32 ret = NETSEC_XDP_PASS; |
| struct page *page; |
| int err; |
| u32 act; |
| |
| act = bpf_prog_run_xdp(prog, xdp); |
| |
| /* Due xdp_adjust_tail: DMA sync for_device cover max len CPU touch */ |
| sync = xdp->data_end - xdp->data_hard_start - NETSEC_RXBUF_HEADROOM; |
| sync = max(sync, len); |
| |
| switch (act) { |
| case XDP_PASS: |
| ret = NETSEC_XDP_PASS; |
| break; |
| case XDP_TX: |
| ret = netsec_xdp_xmit_back(priv, xdp); |
| if (ret != NETSEC_XDP_TX) { |
| page = virt_to_head_page(xdp->data); |
| page_pool_put_page(dring->page_pool, page, sync, true); |
| } |
| break; |
| case XDP_REDIRECT: |
| err = xdp_do_redirect(priv->ndev, xdp, prog); |
| if (!err) { |
| ret = NETSEC_XDP_REDIR; |
| } else { |
| ret = NETSEC_XDP_CONSUMED; |
| page = virt_to_head_page(xdp->data); |
| page_pool_put_page(dring->page_pool, page, sync, true); |
| } |
| break; |
| default: |
| bpf_warn_invalid_xdp_action(priv->ndev, prog, act); |
| fallthrough; |
| case XDP_ABORTED: |
| trace_xdp_exception(priv->ndev, prog, act); |
| fallthrough; /* handle aborts by dropping packet */ |
| case XDP_DROP: |
| ret = NETSEC_XDP_CONSUMED; |
| page = virt_to_head_page(xdp->data); |
| page_pool_put_page(dring->page_pool, page, sync, true); |
| break; |
| } |
| |
| return ret; |
| } |
| |
| static int netsec_process_rx(struct netsec_priv *priv, int budget) |
| { |
| struct netsec_desc_ring *dring = &priv->desc_ring[NETSEC_RING_RX]; |
| struct net_device *ndev = priv->ndev; |
| struct netsec_rx_pkt_info rx_info; |
| enum dma_data_direction dma_dir; |
| struct bpf_prog *xdp_prog; |
| struct xdp_buff xdp; |
| u16 xdp_xmit = 0; |
| u32 xdp_act = 0; |
| int done = 0; |
| |
| xdp_init_buff(&xdp, PAGE_SIZE, &dring->xdp_rxq); |
| |
| xdp_prog = READ_ONCE(priv->xdp_prog); |
| dma_dir = page_pool_get_dma_dir(dring->page_pool); |
| |
| while (done < budget) { |
| u16 idx = dring->tail; |
| struct netsec_de *de = dring->vaddr + (DESC_SZ * idx); |
| struct netsec_desc *desc = &dring->desc[idx]; |
| struct page *page = virt_to_page(desc->addr); |
| u32 xdp_result = NETSEC_XDP_PASS; |
| struct sk_buff *skb = NULL; |
| u16 pkt_len, desc_len; |
| dma_addr_t dma_handle; |
| void *buf_addr; |
| |
| if (de->attr & (1U << NETSEC_RX_PKT_OWN_FIELD)) { |
| /* reading the register clears the irq */ |
| netsec_read(priv, NETSEC_REG_NRM_RX_PKTCNT); |
| break; |
| } |
| |
| /* This barrier is needed to keep us from reading |
| * any other fields out of the netsec_de until we have |
| * verified the descriptor has been written back |
| */ |
| dma_rmb(); |
| done++; |
| |
| pkt_len = de->buf_len_info >> 16; |
| rx_info.err_code = (de->attr >> NETSEC_RX_PKT_ERR_FIELD) & |
| NETSEC_RX_PKT_ERR_MASK; |
| rx_info.err_flag = (de->attr >> NETSEC_RX_PKT_ER_FIELD) & 1; |
| if (rx_info.err_flag) { |
| netif_err(priv, drv, priv->ndev, |
| "%s: rx fail err(%d)\n", __func__, |
| rx_info.err_code); |
| ndev->stats.rx_dropped++; |
| dring->tail = (dring->tail + 1) % DESC_NUM; |
| /* reuse buffer page frag */ |
| netsec_rx_fill(priv, idx, 1); |
| continue; |
| } |
| rx_info.rx_cksum_result = |
| (de->attr >> NETSEC_RX_PKT_CO_FIELD) & 3; |
| |
| /* allocate a fresh buffer and map it to the hardware. |
| * This will eventually replace the old buffer in the hardware |
| */ |
| buf_addr = netsec_alloc_rx_data(priv, &dma_handle, &desc_len); |
| |
| if (unlikely(!buf_addr)) |
| break; |
| |
| dma_sync_single_for_cpu(priv->dev, desc->dma_addr, pkt_len, |
| dma_dir); |
| prefetch(desc->addr); |
| |
| xdp_prepare_buff(&xdp, desc->addr, NETSEC_RXBUF_HEADROOM, |
| pkt_len, false); |
| |
| if (xdp_prog) { |
| xdp_result = netsec_run_xdp(priv, xdp_prog, &xdp); |
| if (xdp_result != NETSEC_XDP_PASS) { |
| xdp_act |= xdp_result; |
| if (xdp_result == NETSEC_XDP_TX) |
| xdp_xmit++; |
| goto next; |
| } |
| } |
| skb = build_skb(desc->addr, desc->len + NETSEC_RX_BUF_NON_DATA); |
| |
| if (unlikely(!skb)) { |
| /* If skb fails recycle_direct will either unmap and |
| * free the page or refill the cache depending on the |
| * cache state. Since we paid the allocation cost if |
| * building an skb fails try to put the page into cache |
| */ |
| page_pool_put_page(dring->page_pool, page, pkt_len, |
| true); |
| netif_err(priv, drv, priv->ndev, |
| "rx failed to build skb\n"); |
| break; |
| } |
| skb_mark_for_recycle(skb); |
| |
| skb_reserve(skb, xdp.data - xdp.data_hard_start); |
| skb_put(skb, xdp.data_end - xdp.data); |
| skb->protocol = eth_type_trans(skb, priv->ndev); |
| |
| if (priv->rx_cksum_offload_flag && |
| rx_info.rx_cksum_result == NETSEC_RX_CKSUM_OK) |
| skb->ip_summed = CHECKSUM_UNNECESSARY; |
| |
| next: |
| if (skb) |
| napi_gro_receive(&priv->napi, skb); |
| if (skb || xdp_result) { |
| ndev->stats.rx_packets++; |
| ndev->stats.rx_bytes += xdp.data_end - xdp.data; |
| } |
| |
| /* Update the descriptor with fresh buffers */ |
| desc->len = desc_len; |
| desc->dma_addr = dma_handle; |
| desc->addr = buf_addr; |
| |
| netsec_rx_fill(priv, idx, 1); |
| dring->tail = (dring->tail + 1) % DESC_NUM; |
| } |
| netsec_finalize_xdp_rx(priv, xdp_act, xdp_xmit); |
| |
| return done; |
| } |
| |
| static int netsec_napi_poll(struct napi_struct *napi, int budget) |
| { |
| struct netsec_priv *priv; |
| int done; |
| |
| priv = container_of(napi, struct netsec_priv, napi); |
| |
| netsec_process_tx(priv); |
| done = netsec_process_rx(priv, budget); |
| |
| if (done < budget && napi_complete_done(napi, done)) { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&priv->reglock, flags); |
| netsec_write(priv, NETSEC_REG_INTEN_SET, |
| NETSEC_IRQ_RX | NETSEC_IRQ_TX); |
| spin_unlock_irqrestore(&priv->reglock, flags); |
| } |
| |
| return done; |
| } |
| |
| |
| static int netsec_desc_used(struct netsec_desc_ring *dring) |
| { |
| int used; |
| |
| if (dring->head >= dring->tail) |
| used = dring->head - dring->tail; |
| else |
| used = dring->head + DESC_NUM - dring->tail; |
| |
| return used; |
| } |
| |
| static int netsec_check_stop_tx(struct netsec_priv *priv, int used) |
| { |
| struct netsec_desc_ring *dring = &priv->desc_ring[NETSEC_RING_TX]; |
| |
| /* keep tail from touching the queue */ |
| if (DESC_NUM - used < 2) { |
| netif_stop_queue(priv->ndev); |
| |
| /* Make sure we read the updated value in case |
| * descriptors got freed |
| */ |
| smp_rmb(); |
| |
| used = netsec_desc_used(dring); |
| if (DESC_NUM - used < 2) |
| return NETDEV_TX_BUSY; |
| |
| netif_wake_queue(priv->ndev); |
| } |
| |
| return 0; |
| } |
| |
| static netdev_tx_t netsec_netdev_start_xmit(struct sk_buff *skb, |
| struct net_device *ndev) |
| { |
| struct netsec_priv *priv = netdev_priv(ndev); |
| struct netsec_desc_ring *dring = &priv->desc_ring[NETSEC_RING_TX]; |
| struct netsec_tx_pkt_ctrl tx_ctrl = {}; |
| struct netsec_desc tx_desc; |
| u16 tso_seg_len = 0; |
| int filled; |
| |
| spin_lock_bh(&dring->lock); |
| filled = netsec_desc_used(dring); |
| if (netsec_check_stop_tx(priv, filled)) { |
| spin_unlock_bh(&dring->lock); |
| net_warn_ratelimited("%s %s Tx queue full\n", |
| dev_name(priv->dev), ndev->name); |
| return NETDEV_TX_BUSY; |
| } |
| |
| if (skb->ip_summed == CHECKSUM_PARTIAL) |
| tx_ctrl.cksum_offload_flag = true; |
| |
| if (skb_is_gso(skb)) |
| tso_seg_len = skb_shinfo(skb)->gso_size; |
| |
| if (tso_seg_len > 0) { |
| if (skb->protocol == htons(ETH_P_IP)) { |
| ip_hdr(skb)->tot_len = 0; |
| tcp_hdr(skb)->check = |
| ~tcp_v4_check(0, ip_hdr(skb)->saddr, |
| ip_hdr(skb)->daddr, 0); |
| } else { |
| tcp_v6_gso_csum_prep(skb); |
| } |
| |
| tx_ctrl.tcp_seg_offload_flag = true; |
| tx_ctrl.tcp_seg_len = tso_seg_len; |
| } |
| |
| tx_desc.dma_addr = dma_map_single(priv->dev, skb->data, |
| skb_headlen(skb), DMA_TO_DEVICE); |
| if (dma_mapping_error(priv->dev, tx_desc.dma_addr)) { |
| spin_unlock_bh(&dring->lock); |
| netif_err(priv, drv, priv->ndev, |
| "%s: DMA mapping failed\n", __func__); |
| ndev->stats.tx_dropped++; |
| dev_kfree_skb_any(skb); |
| return NETDEV_TX_OK; |
| } |
| tx_desc.addr = skb->data; |
| tx_desc.len = skb_headlen(skb); |
| tx_desc.buf_type = TYPE_NETSEC_SKB; |
| |
| skb_tx_timestamp(skb); |
| netdev_sent_queue(priv->ndev, skb->len); |
| |
| netsec_set_tx_de(priv, dring, &tx_ctrl, &tx_desc, skb); |
| spin_unlock_bh(&dring->lock); |
| netsec_write(priv, NETSEC_REG_NRM_TX_PKTCNT, 1); /* submit another tx */ |
| |
| return NETDEV_TX_OK; |
| } |
| |
| static void netsec_uninit_pkt_dring(struct netsec_priv *priv, int id) |
| { |
| struct netsec_desc_ring *dring = &priv->desc_ring[id]; |
| struct netsec_desc *desc; |
| u16 idx; |
| |
| if (!dring->vaddr || !dring->desc) |
| return; |
| for (idx = 0; idx < DESC_NUM; idx++) { |
| desc = &dring->desc[idx]; |
| if (!desc->addr) |
| continue; |
| |
| if (id == NETSEC_RING_RX) { |
| struct page *page = virt_to_page(desc->addr); |
| |
| page_pool_put_full_page(dring->page_pool, page, false); |
| } else if (id == NETSEC_RING_TX) { |
| dma_unmap_single(priv->dev, desc->dma_addr, desc->len, |
| DMA_TO_DEVICE); |
| dev_kfree_skb(desc->skb); |
| } |
| } |
| |
| /* Rx is currently using page_pool */ |
| if (id == NETSEC_RING_RX) { |
| if (xdp_rxq_info_is_reg(&dring->xdp_rxq)) |
| xdp_rxq_info_unreg(&dring->xdp_rxq); |
| page_pool_destroy(dring->page_pool); |
| } |
| |
| memset(dring->desc, 0, sizeof(struct netsec_desc) * DESC_NUM); |
| memset(dring->vaddr, 0, DESC_SZ * DESC_NUM); |
| |
| dring->head = 0; |
| dring->tail = 0; |
| |
| if (id == NETSEC_RING_TX) |
| netdev_reset_queue(priv->ndev); |
| } |
| |
| static void netsec_free_dring(struct netsec_priv *priv, int id) |
| { |
| struct netsec_desc_ring *dring = &priv->desc_ring[id]; |
| |
| if (dring->vaddr) { |
| dma_free_coherent(priv->dev, DESC_SZ * DESC_NUM, |
| dring->vaddr, dring->desc_dma); |
| dring->vaddr = NULL; |
| } |
| |
| kfree(dring->desc); |
| dring->desc = NULL; |
| } |
| |
| static int netsec_alloc_dring(struct netsec_priv *priv, enum ring_id id) |
| { |
| struct netsec_desc_ring *dring = &priv->desc_ring[id]; |
| |
| dring->vaddr = dma_alloc_coherent(priv->dev, DESC_SZ * DESC_NUM, |
| &dring->desc_dma, GFP_KERNEL); |
| if (!dring->vaddr) |
| goto err; |
| |
| dring->desc = kcalloc(DESC_NUM, sizeof(*dring->desc), GFP_KERNEL); |
| if (!dring->desc) |
| goto err; |
| |
| return 0; |
| err: |
| netsec_free_dring(priv, id); |
| |
| return -ENOMEM; |
| } |
| |
| static void netsec_setup_tx_dring(struct netsec_priv *priv) |
| { |
| struct netsec_desc_ring *dring = &priv->desc_ring[NETSEC_RING_TX]; |
| int i; |
| |
| for (i = 0; i < DESC_NUM; i++) { |
| struct netsec_de *de; |
| |
| de = dring->vaddr + (DESC_SZ * i); |
| /* de->attr is not going to be accessed by the NIC |
| * until netsec_set_tx_de() is called. |
| * No need for a dma_wmb() here |
| */ |
| de->attr = 1U << NETSEC_TX_SHIFT_OWN_FIELD; |
| } |
| } |
| |
| static int netsec_setup_rx_dring(struct netsec_priv *priv) |
| { |
| struct netsec_desc_ring *dring = &priv->desc_ring[NETSEC_RING_RX]; |
| struct bpf_prog *xdp_prog = READ_ONCE(priv->xdp_prog); |
| struct page_pool_params pp_params = { |
| .order = 0, |
| /* internal DMA mapping in page_pool */ |
| .flags = PP_FLAG_DMA_MAP | PP_FLAG_DMA_SYNC_DEV, |
| .pool_size = DESC_NUM, |
| .nid = NUMA_NO_NODE, |
| .dev = priv->dev, |
| .dma_dir = xdp_prog ? DMA_BIDIRECTIONAL : DMA_FROM_DEVICE, |
| .offset = NETSEC_RXBUF_HEADROOM, |
| .max_len = NETSEC_RX_BUF_SIZE, |
| .napi = &priv->napi, |
| .netdev = priv->ndev, |
| }; |
| int i, err; |
| |
| dring->page_pool = page_pool_create(&pp_params); |
| if (IS_ERR(dring->page_pool)) { |
| err = PTR_ERR(dring->page_pool); |
| dring->page_pool = NULL; |
| goto err_out; |
| } |
| |
| err = xdp_rxq_info_reg(&dring->xdp_rxq, priv->ndev, 0, priv->napi.napi_id); |
| if (err) |
| goto err_out; |
| |
| err = xdp_rxq_info_reg_mem_model(&dring->xdp_rxq, MEM_TYPE_PAGE_POOL, |
| dring->page_pool); |
| if (err) |
| goto err_out; |
| |
| for (i = 0; i < DESC_NUM; i++) { |
| struct netsec_desc *desc = &dring->desc[i]; |
| dma_addr_t dma_handle; |
| void *buf; |
| u16 len; |
| |
| buf = netsec_alloc_rx_data(priv, &dma_handle, &len); |
| |
| if (!buf) { |
| err = -ENOMEM; |
| goto err_out; |
| } |
| desc->dma_addr = dma_handle; |
| desc->addr = buf; |
| desc->len = len; |
| } |
| |
| netsec_rx_fill(priv, 0, DESC_NUM); |
| |
| return 0; |
| |
| err_out: |
| netsec_uninit_pkt_dring(priv, NETSEC_RING_RX); |
| return err; |
| } |
| |
| static int netsec_netdev_load_ucode_region(struct netsec_priv *priv, u32 reg, |
| u32 addr_h, u32 addr_l, u32 size) |
| { |
| u64 base = (u64)addr_h << 32 | addr_l; |
| void __iomem *ucode; |
| u32 i; |
| |
| ucode = ioremap(base, size * sizeof(u32)); |
| if (!ucode) |
| return -ENOMEM; |
| |
| for (i = 0; i < size; i++) |
| netsec_write(priv, reg, readl(ucode + i * 4)); |
| |
| iounmap(ucode); |
| return 0; |
| } |
| |
| static int netsec_netdev_load_microcode(struct netsec_priv *priv) |
| { |
| u32 addr_h, addr_l, size; |
| int err; |
| |
| addr_h = readl(priv->eeprom_base + NETSEC_EEPROM_HM_ME_ADDRESS_H); |
| addr_l = readl(priv->eeprom_base + NETSEC_EEPROM_HM_ME_ADDRESS_L); |
| size = readl(priv->eeprom_base + NETSEC_EEPROM_HM_ME_SIZE); |
| err = netsec_netdev_load_ucode_region(priv, NETSEC_REG_DMAC_HM_CMD_BUF, |
| addr_h, addr_l, size); |
| if (err) |
| return err; |
| |
| addr_h = readl(priv->eeprom_base + NETSEC_EEPROM_MH_ME_ADDRESS_H); |
| addr_l = readl(priv->eeprom_base + NETSEC_EEPROM_MH_ME_ADDRESS_L); |
| size = readl(priv->eeprom_base + NETSEC_EEPROM_MH_ME_SIZE); |
| err = netsec_netdev_load_ucode_region(priv, NETSEC_REG_DMAC_MH_CMD_BUF, |
| addr_h, addr_l, size); |
| if (err) |
| return err; |
| |
| addr_h = 0; |
| addr_l = readl(priv->eeprom_base + NETSEC_EEPROM_PKT_ME_ADDRESS); |
| size = readl(priv->eeprom_base + NETSEC_EEPROM_PKT_ME_SIZE); |
| err = netsec_netdev_load_ucode_region(priv, NETSEC_REG_PKT_CMD_BUF, |
| addr_h, addr_l, size); |
| if (err) |
| return err; |
| |
| return 0; |
| } |
| |
| static int netsec_reset_hardware(struct netsec_priv *priv, |
| bool load_ucode) |
| { |
| u32 value; |
| int err; |
| |
| /* stop DMA engines */ |
| if (!netsec_read(priv, NETSEC_REG_ADDR_DIS_CORE)) { |
| netsec_write(priv, NETSEC_REG_DMA_HM_CTRL, |
| NETSEC_DMA_CTRL_REG_STOP); |
| netsec_write(priv, NETSEC_REG_DMA_MH_CTRL, |
| NETSEC_DMA_CTRL_REG_STOP); |
| |
| while (netsec_read(priv, NETSEC_REG_DMA_HM_CTRL) & |
| NETSEC_DMA_CTRL_REG_STOP) |
| cpu_relax(); |
| |
| while (netsec_read(priv, NETSEC_REG_DMA_MH_CTRL) & |
| NETSEC_DMA_CTRL_REG_STOP) |
| cpu_relax(); |
| } |
| |
| netsec_write(priv, NETSEC_REG_SOFT_RST, NETSEC_SOFT_RST_REG_RESET); |
| netsec_write(priv, NETSEC_REG_SOFT_RST, NETSEC_SOFT_RST_REG_RUN); |
| netsec_write(priv, NETSEC_REG_COM_INIT, NETSEC_COM_INIT_REG_ALL); |
| |
| while (netsec_read(priv, NETSEC_REG_COM_INIT) != 0) |
| cpu_relax(); |
| |
| /* set desc_start addr */ |
| netsec_write(priv, NETSEC_REG_NRM_RX_DESC_START_UP, |
| upper_32_bits(priv->desc_ring[NETSEC_RING_RX].desc_dma)); |
| netsec_write(priv, NETSEC_REG_NRM_RX_DESC_START_LW, |
| lower_32_bits(priv->desc_ring[NETSEC_RING_RX].desc_dma)); |
| |
| netsec_write(priv, NETSEC_REG_NRM_TX_DESC_START_UP, |
| upper_32_bits(priv->desc_ring[NETSEC_RING_TX].desc_dma)); |
| netsec_write(priv, NETSEC_REG_NRM_TX_DESC_START_LW, |
| lower_32_bits(priv->desc_ring[NETSEC_RING_TX].desc_dma)); |
| |
| /* set normal tx dring ring config */ |
| netsec_write(priv, NETSEC_REG_NRM_TX_CONFIG, |
| 1 << NETSEC_REG_DESC_ENDIAN); |
| netsec_write(priv, NETSEC_REG_NRM_RX_CONFIG, |
| 1 << NETSEC_REG_DESC_ENDIAN); |
| |
| if (load_ucode) { |
| err = netsec_netdev_load_microcode(priv); |
| if (err) { |
| netif_err(priv, probe, priv->ndev, |
| "%s: failed to load microcode (%d)\n", |
| __func__, err); |
| return err; |
| } |
| } |
| |
| /* start DMA engines */ |
| netsec_write(priv, NETSEC_REG_DMA_TMR_CTRL, priv->freq / 1000000 - 1); |
| netsec_write(priv, NETSEC_REG_ADDR_DIS_CORE, 0); |
| |
| usleep_range(1000, 2000); |
| |
| if (!(netsec_read(priv, NETSEC_REG_TOP_STATUS) & |
| NETSEC_TOP_IRQ_REG_CODE_LOAD_END)) { |
| netif_err(priv, probe, priv->ndev, |
| "microengine start failed\n"); |
| return -ENXIO; |
| } |
| netsec_write(priv, NETSEC_REG_TOP_STATUS, |
| NETSEC_TOP_IRQ_REG_CODE_LOAD_END); |
| |
| value = NETSEC_PKT_CTRL_REG_MODE_NRM; |
| if (priv->ndev->mtu > ETH_DATA_LEN) |
| value |= NETSEC_PKT_CTRL_REG_EN_JUMBO; |
| |
| /* change to normal mode */ |
| netsec_write(priv, NETSEC_REG_DMA_MH_CTRL, MH_CTRL__MODE_TRANS); |
| netsec_write(priv, NETSEC_REG_PKT_CTRL, value); |
| |
| while ((netsec_read(priv, NETSEC_REG_MODE_TRANS_COMP_STATUS) & |
| NETSEC_MODE_TRANS_COMP_IRQ_T2N) == 0) |
| cpu_relax(); |
| |
| /* clear any pending EMPTY/ERR irq status */ |
| netsec_write(priv, NETSEC_REG_NRM_TX_STATUS, ~0); |
| |
| /* Disable TX & RX intr */ |
| netsec_write(priv, NETSEC_REG_INTEN_CLR, ~0); |
| |
| return 0; |
| } |
| |
| static int netsec_start_gmac(struct netsec_priv *priv) |
| { |
| struct phy_device *phydev = priv->ndev->phydev; |
| u32 value = 0; |
| int ret; |
| |
| if (phydev->speed != SPEED_1000) |
| value = (NETSEC_GMAC_MCR_REG_CST | |
| NETSEC_GMAC_MCR_REG_HALF_DUPLEX_COMMON); |
| |
| if (netsec_mac_write(priv, GMAC_REG_MCR, value)) |
| return -ETIMEDOUT; |
| if (netsec_mac_write(priv, GMAC_REG_BMR, |
| NETSEC_GMAC_BMR_REG_RESET)) |
| return -ETIMEDOUT; |
| |
| /* Wait soft reset */ |
| usleep_range(1000, 5000); |
| |
| ret = netsec_mac_read(priv, GMAC_REG_BMR, &value); |
| if (ret) |
| return ret; |
| if (value & NETSEC_GMAC_BMR_REG_SWR) |
| return -EAGAIN; |
| |
| netsec_write(priv, MAC_REG_DESC_SOFT_RST, 1); |
| if (netsec_wait_while_busy(priv, MAC_REG_DESC_SOFT_RST, 1)) |
| return -ETIMEDOUT; |
| |
| netsec_write(priv, MAC_REG_DESC_INIT, 1); |
| if (netsec_wait_while_busy(priv, MAC_REG_DESC_INIT, 1)) |
| return -ETIMEDOUT; |
| |
| if (netsec_mac_write(priv, GMAC_REG_BMR, |
| NETSEC_GMAC_BMR_REG_COMMON)) |
| return -ETIMEDOUT; |
| if (netsec_mac_write(priv, GMAC_REG_RDLAR, |
| NETSEC_GMAC_RDLAR_REG_COMMON)) |
| return -ETIMEDOUT; |
| if (netsec_mac_write(priv, GMAC_REG_TDLAR, |
| NETSEC_GMAC_TDLAR_REG_COMMON)) |
| return -ETIMEDOUT; |
| if (netsec_mac_write(priv, GMAC_REG_MFFR, 0x80000001)) |
| return -ETIMEDOUT; |
| |
| ret = netsec_mac_update_to_phy_state(priv); |
| if (ret) |
| return ret; |
| |
| ret = netsec_mac_read(priv, GMAC_REG_OMR, &value); |
| if (ret) |
| return ret; |
| |
| value |= NETSEC_GMAC_OMR_REG_SR; |
| value |= NETSEC_GMAC_OMR_REG_ST; |
| |
| netsec_write(priv, NETSEC_REG_NRM_RX_INTEN_CLR, ~0); |
| netsec_write(priv, NETSEC_REG_NRM_TX_INTEN_CLR, ~0); |
| |
| netsec_et_set_coalesce(priv->ndev, &priv->et_coalesce, NULL, NULL); |
| |
| if (netsec_mac_write(priv, GMAC_REG_OMR, value)) |
| return -ETIMEDOUT; |
| |
| return 0; |
| } |
| |
| static int netsec_stop_gmac(struct netsec_priv *priv) |
| { |
| u32 value; |
| int ret; |
| |
| ret = netsec_mac_read(priv, GMAC_REG_OMR, &value); |
| if (ret) |
| return ret; |
| value &= ~NETSEC_GMAC_OMR_REG_SR; |
| value &= ~NETSEC_GMAC_OMR_REG_ST; |
| |
| /* disable all interrupts */ |
| netsec_write(priv, NETSEC_REG_NRM_RX_INTEN_CLR, ~0); |
| netsec_write(priv, NETSEC_REG_NRM_TX_INTEN_CLR, ~0); |
| |
| return netsec_mac_write(priv, GMAC_REG_OMR, value); |
| } |
| |
| static void netsec_phy_adjust_link(struct net_device *ndev) |
| { |
| struct netsec_priv *priv = netdev_priv(ndev); |
| |
| if (ndev->phydev->link) |
| netsec_start_gmac(priv); |
| else |
| netsec_stop_gmac(priv); |
| |
| phy_print_status(ndev->phydev); |
| } |
| |
| static irqreturn_t netsec_irq_handler(int irq, void *dev_id) |
| { |
| struct netsec_priv *priv = dev_id; |
| u32 val, status = netsec_read(priv, NETSEC_REG_TOP_STATUS); |
| unsigned long flags; |
| |
| /* Disable interrupts */ |
| if (status & NETSEC_IRQ_TX) { |
| val = netsec_read(priv, NETSEC_REG_NRM_TX_STATUS); |
| netsec_write(priv, NETSEC_REG_NRM_TX_STATUS, val); |
| } |
| if (status & NETSEC_IRQ_RX) { |
| val = netsec_read(priv, NETSEC_REG_NRM_RX_STATUS); |
| netsec_write(priv, NETSEC_REG_NRM_RX_STATUS, val); |
| } |
| |
| spin_lock_irqsave(&priv->reglock, flags); |
| netsec_write(priv, NETSEC_REG_INTEN_CLR, NETSEC_IRQ_RX | NETSEC_IRQ_TX); |
| spin_unlock_irqrestore(&priv->reglock, flags); |
| |
| napi_schedule(&priv->napi); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int netsec_netdev_open(struct net_device *ndev) |
| { |
| struct netsec_priv *priv = netdev_priv(ndev); |
| int ret; |
| |
| pm_runtime_get_sync(priv->dev); |
| |
| netsec_setup_tx_dring(priv); |
| ret = netsec_setup_rx_dring(priv); |
| if (ret) { |
| netif_err(priv, probe, priv->ndev, |
| "%s: fail setup ring\n", __func__); |
| goto err1; |
| } |
| |
| ret = request_irq(priv->ndev->irq, netsec_irq_handler, |
| IRQF_SHARED, "netsec", priv); |
| if (ret) { |
| netif_err(priv, drv, priv->ndev, "request_irq failed\n"); |
| goto err2; |
| } |
| |
| if (dev_of_node(priv->dev)) { |
| if (!of_phy_connect(priv->ndev, priv->phy_np, |
| netsec_phy_adjust_link, 0, |
| priv->phy_interface)) { |
| netif_err(priv, link, priv->ndev, "missing PHY\n"); |
| ret = -ENODEV; |
| goto err3; |
| } |
| } else { |
| ret = phy_connect_direct(priv->ndev, priv->phydev, |
| netsec_phy_adjust_link, |
| priv->phy_interface); |
| if (ret) { |
| netif_err(priv, link, priv->ndev, |
| "phy_connect_direct() failed (%d)\n", ret); |
| goto err3; |
| } |
| } |
| |
| phy_start(ndev->phydev); |
| |
| netsec_start_gmac(priv); |
| napi_enable(&priv->napi); |
| netif_start_queue(ndev); |
| |
| /* Enable TX+RX intr. */ |
| netsec_write(priv, NETSEC_REG_INTEN_SET, NETSEC_IRQ_RX | NETSEC_IRQ_TX); |
| |
| return 0; |
| err3: |
| free_irq(priv->ndev->irq, priv); |
| err2: |
| netsec_uninit_pkt_dring(priv, NETSEC_RING_RX); |
| err1: |
| pm_runtime_put_sync(priv->dev); |
| return ret; |
| } |
| |
| static int netsec_netdev_stop(struct net_device *ndev) |
| { |
| int ret; |
| struct netsec_priv *priv = netdev_priv(ndev); |
| |
| netif_stop_queue(priv->ndev); |
| dma_wmb(); |
| |
| napi_disable(&priv->napi); |
| |
| netsec_write(priv, NETSEC_REG_INTEN_CLR, ~0); |
| netsec_stop_gmac(priv); |
| |
| free_irq(priv->ndev->irq, priv); |
| |
| netsec_uninit_pkt_dring(priv, NETSEC_RING_TX); |
| netsec_uninit_pkt_dring(priv, NETSEC_RING_RX); |
| |
| phy_stop(ndev->phydev); |
| phy_disconnect(ndev->phydev); |
| |
| ret = netsec_reset_hardware(priv, false); |
| |
| pm_runtime_put_sync(priv->dev); |
| |
| return ret; |
| } |
| |
| static int netsec_netdev_init(struct net_device *ndev) |
| { |
| struct netsec_priv *priv = netdev_priv(ndev); |
| int ret; |
| u16 data; |
| |
| BUILD_BUG_ON_NOT_POWER_OF_2(DESC_NUM); |
| |
| ret = netsec_alloc_dring(priv, NETSEC_RING_TX); |
| if (ret) |
| return ret; |
| |
| ret = netsec_alloc_dring(priv, NETSEC_RING_RX); |
| if (ret) |
| goto err1; |
| |
| /* set phy power down */ |
| data = netsec_phy_read(priv->mii_bus, priv->phy_addr, MII_BMCR); |
| netsec_phy_write(priv->mii_bus, priv->phy_addr, MII_BMCR, |
| data | BMCR_PDOWN); |
| |
| ret = netsec_reset_hardware(priv, true); |
| if (ret) |
| goto err2; |
| |
| /* Restore phy power state */ |
| netsec_phy_write(priv->mii_bus, priv->phy_addr, MII_BMCR, data); |
| |
| spin_lock_init(&priv->desc_ring[NETSEC_RING_TX].lock); |
| spin_lock_init(&priv->desc_ring[NETSEC_RING_RX].lock); |
| |
| return 0; |
| err2: |
| netsec_free_dring(priv, NETSEC_RING_RX); |
| err1: |
| netsec_free_dring(priv, NETSEC_RING_TX); |
| return ret; |
| } |
| |
| static void netsec_netdev_uninit(struct net_device *ndev) |
| { |
| struct netsec_priv *priv = netdev_priv(ndev); |
| |
| netsec_free_dring(priv, NETSEC_RING_RX); |
| netsec_free_dring(priv, NETSEC_RING_TX); |
| } |
| |
| static int netsec_netdev_set_features(struct net_device *ndev, |
| netdev_features_t features) |
| { |
| struct netsec_priv *priv = netdev_priv(ndev); |
| |
| priv->rx_cksum_offload_flag = !!(features & NETIF_F_RXCSUM); |
| |
| return 0; |
| } |
| |
| static int netsec_xdp_xmit(struct net_device *ndev, int n, |
| struct xdp_frame **frames, u32 flags) |
| { |
| struct netsec_priv *priv = netdev_priv(ndev); |
| struct netsec_desc_ring *tx_ring = &priv->desc_ring[NETSEC_RING_TX]; |
| int i, nxmit = 0; |
| |
| if (unlikely(flags & ~XDP_XMIT_FLAGS_MASK)) |
| return -EINVAL; |
| |
| spin_lock(&tx_ring->lock); |
| for (i = 0; i < n; i++) { |
| struct xdp_frame *xdpf = frames[i]; |
| int err; |
| |
| err = netsec_xdp_queue_one(priv, xdpf, true); |
| if (err != NETSEC_XDP_TX) |
| break; |
| |
| tx_ring->xdp_xmit++; |
| nxmit++; |
| } |
| spin_unlock(&tx_ring->lock); |
| |
| if (unlikely(flags & XDP_XMIT_FLUSH)) { |
| netsec_xdp_ring_tx_db(priv, tx_ring->xdp_xmit); |
| tx_ring->xdp_xmit = 0; |
| } |
| |
| return nxmit; |
| } |
| |
| static int netsec_xdp_setup(struct netsec_priv *priv, struct bpf_prog *prog, |
| struct netlink_ext_ack *extack) |
| { |
| struct net_device *dev = priv->ndev; |
| struct bpf_prog *old_prog; |
| |
| /* For now just support only the usual MTU sized frames */ |
| if (prog && dev->mtu > 1500) { |
| NL_SET_ERR_MSG_MOD(extack, "Jumbo frames not supported on XDP"); |
| return -EOPNOTSUPP; |
| } |
| |
| if (netif_running(dev)) |
| netsec_netdev_stop(dev); |
| |
| /* Detach old prog, if any */ |
| old_prog = xchg(&priv->xdp_prog, prog); |
| if (old_prog) |
| bpf_prog_put(old_prog); |
| |
| if (netif_running(dev)) |
| netsec_netdev_open(dev); |
| |
| return 0; |
| } |
| |
| static int netsec_xdp(struct net_device *ndev, struct netdev_bpf *xdp) |
| { |
| struct netsec_priv *priv = netdev_priv(ndev); |
| |
| switch (xdp->command) { |
| case XDP_SETUP_PROG: |
| return netsec_xdp_setup(priv, xdp->prog, xdp->extack); |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static const struct net_device_ops netsec_netdev_ops = { |
| .ndo_init = netsec_netdev_init, |
| .ndo_uninit = netsec_netdev_uninit, |
| .ndo_open = netsec_netdev_open, |
| .ndo_stop = netsec_netdev_stop, |
| .ndo_start_xmit = netsec_netdev_start_xmit, |
| .ndo_set_features = netsec_netdev_set_features, |
| .ndo_set_mac_address = eth_mac_addr, |
| .ndo_validate_addr = eth_validate_addr, |
| .ndo_eth_ioctl = phy_do_ioctl, |
| .ndo_xdp_xmit = netsec_xdp_xmit, |
| .ndo_bpf = netsec_xdp, |
| }; |
| |
| static int netsec_of_probe(struct platform_device *pdev, |
| struct netsec_priv *priv, u32 *phy_addr) |
| { |
| int err; |
| |
| err = of_get_phy_mode(pdev->dev.of_node, &priv->phy_interface); |
| if (err) { |
| dev_err(&pdev->dev, "missing required property 'phy-mode'\n"); |
| return err; |
| } |
| |
| /* |
| * SynQuacer is physically configured with TX and RX delays |
| * but the standard firmware claimed otherwise for a long |
| * time, ignore it. |
| */ |
| if (of_machine_is_compatible("socionext,developer-box") && |
| priv->phy_interface != PHY_INTERFACE_MODE_RGMII_ID) { |
| dev_warn(&pdev->dev, "Outdated firmware reports incorrect PHY mode, overriding\n"); |
| priv->phy_interface = PHY_INTERFACE_MODE_RGMII_ID; |
| } |
| |
| priv->phy_np = of_parse_phandle(pdev->dev.of_node, "phy-handle", 0); |
| if (!priv->phy_np) { |
| dev_err(&pdev->dev, "missing required property 'phy-handle'\n"); |
| return -EINVAL; |
| } |
| |
| *phy_addr = of_mdio_parse_addr(&pdev->dev, priv->phy_np); |
| |
| priv->clk = devm_clk_get(&pdev->dev, NULL); /* get by 'phy_ref_clk' */ |
| if (IS_ERR(priv->clk)) |
| return dev_err_probe(&pdev->dev, PTR_ERR(priv->clk), |
| "phy_ref_clk not found\n"); |
| priv->freq = clk_get_rate(priv->clk); |
| |
| return 0; |
| } |
| |
| static int netsec_acpi_probe(struct platform_device *pdev, |
| struct netsec_priv *priv, u32 *phy_addr) |
| { |
| int ret; |
| |
| if (!IS_ENABLED(CONFIG_ACPI)) |
| return -ENODEV; |
| |
| /* ACPI systems are assumed to configure the PHY in firmware, so |
| * there is really no need to discover the PHY mode from the DSDT. |
| * Since firmware is known to exist in the field that configures the |
| * PHY correctly but passes the wrong mode string in the phy-mode |
| * device property, we have no choice but to ignore it. |
| */ |
| priv->phy_interface = PHY_INTERFACE_MODE_NA; |
| |
| ret = device_property_read_u32(&pdev->dev, "phy-channel", phy_addr); |
| if (ret) |
| return dev_err_probe(&pdev->dev, ret, |
| "missing required property 'phy-channel'\n"); |
| |
| ret = device_property_read_u32(&pdev->dev, |
| "socionext,phy-clock-frequency", |
| &priv->freq); |
| if (ret) |
| return dev_err_probe(&pdev->dev, ret, |
| "missing required property 'socionext,phy-clock-frequency'\n"); |
| return 0; |
| } |
| |
| static void netsec_unregister_mdio(struct netsec_priv *priv) |
| { |
| struct phy_device *phydev = priv->phydev; |
| |
| if (!dev_of_node(priv->dev) && phydev) { |
| phy_device_remove(phydev); |
| phy_device_free(phydev); |
| } |
| |
| mdiobus_unregister(priv->mii_bus); |
| } |
| |
| static int netsec_register_mdio(struct netsec_priv *priv, u32 phy_addr) |
| { |
| struct mii_bus *bus; |
| int ret; |
| |
| bus = devm_mdiobus_alloc(priv->dev); |
| if (!bus) |
| return -ENOMEM; |
| |
| snprintf(bus->id, MII_BUS_ID_SIZE, "%s", dev_name(priv->dev)); |
| bus->priv = priv; |
| bus->name = "SNI NETSEC MDIO"; |
| bus->read = netsec_phy_read; |
| bus->write = netsec_phy_write; |
| bus->parent = priv->dev; |
| priv->mii_bus = bus; |
| |
| if (dev_of_node(priv->dev)) { |
| struct device_node *mdio_node, *parent = dev_of_node(priv->dev); |
| |
| mdio_node = of_get_child_by_name(parent, "mdio"); |
| if (mdio_node) { |
| parent = mdio_node; |
| } else { |
| /* older f/w doesn't populate the mdio subnode, |
| * allow relaxed upgrade of f/w in due time. |
| */ |
| dev_info(priv->dev, "Upgrade f/w for mdio subnode!\n"); |
| } |
| |
| ret = of_mdiobus_register(bus, parent); |
| of_node_put(mdio_node); |
| |
| if (ret) { |
| dev_err(priv->dev, "mdiobus register err(%d)\n", ret); |
| return ret; |
| } |
| } else { |
| /* Mask out all PHYs from auto probing. */ |
| bus->phy_mask = ~0; |
| ret = mdiobus_register(bus); |
| if (ret) { |
| dev_err(priv->dev, "mdiobus register err(%d)\n", ret); |
| return ret; |
| } |
| |
| priv->phydev = get_phy_device(bus, phy_addr, false); |
| if (IS_ERR(priv->phydev)) { |
| ret = PTR_ERR(priv->phydev); |
| dev_err(priv->dev, "get_phy_device err(%d)\n", ret); |
| priv->phydev = NULL; |
| mdiobus_unregister(bus); |
| return -ENODEV; |
| } |
| |
| ret = phy_device_register(priv->phydev); |
| if (ret) { |
| phy_device_free(priv->phydev); |
| mdiobus_unregister(bus); |
| dev_err(priv->dev, |
| "phy_device_register err(%d)\n", ret); |
| } |
| } |
| |
| return ret; |
| } |
| |
| static int netsec_probe(struct platform_device *pdev) |
| { |
| struct resource *mmio_res, *eeprom_res; |
| struct netsec_priv *priv; |
| u32 hw_ver, phy_addr = 0; |
| struct net_device *ndev; |
| int ret; |
| int irq; |
| |
| mmio_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!mmio_res) { |
| dev_err(&pdev->dev, "No MMIO resource found.\n"); |
| return -ENODEV; |
| } |
| |
| eeprom_res = platform_get_resource(pdev, IORESOURCE_MEM, 1); |
| if (!eeprom_res) { |
| dev_info(&pdev->dev, "No EEPROM resource found.\n"); |
| return -ENODEV; |
| } |
| |
| irq = platform_get_irq(pdev, 0); |
| if (irq < 0) |
| return irq; |
| |
| ndev = alloc_etherdev(sizeof(*priv)); |
| if (!ndev) |
| return -ENOMEM; |
| |
| priv = netdev_priv(ndev); |
| |
| spin_lock_init(&priv->reglock); |
| SET_NETDEV_DEV(ndev, &pdev->dev); |
| platform_set_drvdata(pdev, priv); |
| ndev->irq = irq; |
| priv->dev = &pdev->dev; |
| priv->ndev = ndev; |
| |
| priv->msg_enable = NETIF_MSG_TX_ERR | NETIF_MSG_HW | NETIF_MSG_DRV | |
| NETIF_MSG_LINK | NETIF_MSG_PROBE; |
| |
| priv->ioaddr = devm_ioremap(&pdev->dev, mmio_res->start, |
| resource_size(mmio_res)); |
| if (!priv->ioaddr) { |
| dev_err(&pdev->dev, "devm_ioremap() failed\n"); |
| ret = -ENXIO; |
| goto free_ndev; |
| } |
| |
| priv->eeprom_base = devm_ioremap(&pdev->dev, eeprom_res->start, |
| resource_size(eeprom_res)); |
| if (!priv->eeprom_base) { |
| dev_err(&pdev->dev, "devm_ioremap() failed for EEPROM\n"); |
| ret = -ENXIO; |
| goto free_ndev; |
| } |
| |
| ret = device_get_ethdev_address(&pdev->dev, ndev); |
| if (ret && priv->eeprom_base) { |
| void __iomem *macp = priv->eeprom_base + |
| NETSEC_EEPROM_MAC_ADDRESS; |
| u8 addr[ETH_ALEN]; |
| |
| addr[0] = readb(macp + 3); |
| addr[1] = readb(macp + 2); |
| addr[2] = readb(macp + 1); |
| addr[3] = readb(macp + 0); |
| addr[4] = readb(macp + 7); |
| addr[5] = readb(macp + 6); |
| eth_hw_addr_set(ndev, addr); |
| } |
| |
| if (!is_valid_ether_addr(ndev->dev_addr)) { |
| dev_warn(&pdev->dev, "No MAC address found, using random\n"); |
| eth_hw_addr_random(ndev); |
| } |
| |
| if (dev_of_node(&pdev->dev)) |
| ret = netsec_of_probe(pdev, priv, &phy_addr); |
| else |
| ret = netsec_acpi_probe(pdev, priv, &phy_addr); |
| if (ret) |
| goto free_ndev; |
| |
| priv->phy_addr = phy_addr; |
| |
| if (!priv->freq) { |
| dev_err(&pdev->dev, "missing PHY reference clock frequency\n"); |
| ret = -ENODEV; |
| goto free_ndev; |
| } |
| |
| /* default for throughput */ |
| priv->et_coalesce.rx_coalesce_usecs = 500; |
| priv->et_coalesce.rx_max_coalesced_frames = 8; |
| priv->et_coalesce.tx_coalesce_usecs = 500; |
| priv->et_coalesce.tx_max_coalesced_frames = 8; |
| |
| ret = device_property_read_u32(&pdev->dev, "max-frame-size", |
| &ndev->max_mtu); |
| if (ret < 0) |
| ndev->max_mtu = ETH_DATA_LEN; |
| |
| /* runtime_pm coverage just for probe, open/close also cover it */ |
| pm_runtime_enable(&pdev->dev); |
| pm_runtime_get_sync(&pdev->dev); |
| |
| hw_ver = netsec_read(priv, NETSEC_REG_F_TAIKI_VER); |
| /* this driver only supports F_TAIKI style NETSEC */ |
| if (NETSEC_F_NETSEC_VER_MAJOR_NUM(hw_ver) != |
| NETSEC_F_NETSEC_VER_MAJOR_NUM(NETSEC_REG_NETSEC_VER_F_TAIKI)) { |
| ret = -ENODEV; |
| goto pm_disable; |
| } |
| |
| dev_info(&pdev->dev, "hardware revision %d.%d\n", |
| hw_ver >> 16, hw_ver & 0xffff); |
| |
| netif_napi_add(ndev, &priv->napi, netsec_napi_poll); |
| |
| ndev->netdev_ops = &netsec_netdev_ops; |
| ndev->ethtool_ops = &netsec_ethtool_ops; |
| |
| ndev->features |= NETIF_F_HIGHDMA | NETIF_F_RXCSUM | NETIF_F_GSO | |
| NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM; |
| ndev->hw_features = ndev->features; |
| |
| ndev->xdp_features = NETDEV_XDP_ACT_BASIC | NETDEV_XDP_ACT_REDIRECT | |
| NETDEV_XDP_ACT_NDO_XMIT; |
| |
| priv->rx_cksum_offload_flag = true; |
| |
| ret = netsec_register_mdio(priv, phy_addr); |
| if (ret) |
| goto unreg_napi; |
| |
| if (dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(40))) |
| dev_warn(&pdev->dev, "Failed to set DMA mask\n"); |
| |
| ret = register_netdev(ndev); |
| if (ret) { |
| netif_err(priv, probe, ndev, "register_netdev() failed\n"); |
| goto unreg_mii; |
| } |
| |
| pm_runtime_put_sync(&pdev->dev); |
| return 0; |
| |
| unreg_mii: |
| netsec_unregister_mdio(priv); |
| unreg_napi: |
| netif_napi_del(&priv->napi); |
| pm_disable: |
| pm_runtime_put_sync(&pdev->dev); |
| pm_runtime_disable(&pdev->dev); |
| free_ndev: |
| free_netdev(ndev); |
| dev_err(&pdev->dev, "init failed\n"); |
| |
| return ret; |
| } |
| |
| static void netsec_remove(struct platform_device *pdev) |
| { |
| struct netsec_priv *priv = platform_get_drvdata(pdev); |
| |
| unregister_netdev(priv->ndev); |
| |
| netsec_unregister_mdio(priv); |
| |
| netif_napi_del(&priv->napi); |
| |
| pm_runtime_disable(&pdev->dev); |
| free_netdev(priv->ndev); |
| } |
| |
| #ifdef CONFIG_PM |
| static int netsec_runtime_suspend(struct device *dev) |
| { |
| struct netsec_priv *priv = dev_get_drvdata(dev); |
| |
| netsec_write(priv, NETSEC_REG_CLK_EN, 0); |
| |
| clk_disable_unprepare(priv->clk); |
| |
| return 0; |
| } |
| |
| static int netsec_runtime_resume(struct device *dev) |
| { |
| struct netsec_priv *priv = dev_get_drvdata(dev); |
| |
| clk_prepare_enable(priv->clk); |
| |
| netsec_write(priv, NETSEC_REG_CLK_EN, NETSEC_CLK_EN_REG_DOM_D | |
| NETSEC_CLK_EN_REG_DOM_C | |
| NETSEC_CLK_EN_REG_DOM_G); |
| return 0; |
| } |
| #endif |
| |
| static const struct dev_pm_ops netsec_pm_ops = { |
| SET_RUNTIME_PM_OPS(netsec_runtime_suspend, netsec_runtime_resume, NULL) |
| }; |
| |
| static const struct of_device_id netsec_dt_ids[] = { |
| { .compatible = "socionext,synquacer-netsec" }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, netsec_dt_ids); |
| |
| #ifdef CONFIG_ACPI |
| static const struct acpi_device_id netsec_acpi_ids[] = { |
| { "SCX0001" }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(acpi, netsec_acpi_ids); |
| #endif |
| |
| static struct platform_driver netsec_driver = { |
| .probe = netsec_probe, |
| .remove_new = netsec_remove, |
| .driver = { |
| .name = "netsec", |
| .pm = &netsec_pm_ops, |
| .of_match_table = netsec_dt_ids, |
| .acpi_match_table = ACPI_PTR(netsec_acpi_ids), |
| }, |
| }; |
| module_platform_driver(netsec_driver); |
| |
| MODULE_AUTHOR("Jassi Brar <jaswinder.singh@linaro.org>"); |
| MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>"); |
| MODULE_DESCRIPTION("NETSEC Ethernet driver"); |
| MODULE_LICENSE("GPL"); |