| // SPDX-License-Identifier: GPL-2.0-only |
| /******************************************************************************* |
| Copyright (C) 2013 Vayavya Labs Pvt Ltd |
| |
| This implements all the API for managing HW timestamp & PTP. |
| |
| |
| Author: Rayagond Kokatanur <rayagond@vayavyalabs.com> |
| Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> |
| *******************************************************************************/ |
| |
| #include <linux/io.h> |
| #include <linux/iopoll.h> |
| #include <linux/delay.h> |
| #include <linux/ptp_clock_kernel.h> |
| #include "common.h" |
| #include "stmmac_ptp.h" |
| #include "dwmac4.h" |
| #include "stmmac.h" |
| |
| static void config_hw_tstamping(void __iomem *ioaddr, u32 data) |
| { |
| writel(data, ioaddr + PTP_TCR); |
| } |
| |
| static void config_sub_second_increment(void __iomem *ioaddr, |
| u32 ptp_clock, int gmac4, u32 *ssinc) |
| { |
| u32 value = readl(ioaddr + PTP_TCR); |
| unsigned long data; |
| u32 reg_value; |
| |
| /* For GMAC3.x, 4.x versions, in "fine adjustement mode" set sub-second |
| * increment to twice the number of nanoseconds of a clock cycle. |
| * The calculation of the default_addend value by the caller will set it |
| * to mid-range = 2^31 when the remainder of this division is zero, |
| * which will make the accumulator overflow once every 2 ptp_clock |
| * cycles, adding twice the number of nanoseconds of a clock cycle : |
| * 2000000000ULL / ptp_clock. |
| */ |
| if (value & PTP_TCR_TSCFUPDT) |
| data = (2000000000ULL / ptp_clock); |
| else |
| data = (1000000000ULL / ptp_clock); |
| |
| /* 0.465ns accuracy */ |
| if (!(value & PTP_TCR_TSCTRLSSR)) |
| data = (data * 1000) / 465; |
| |
| if (data > PTP_SSIR_SSINC_MAX) |
| data = PTP_SSIR_SSINC_MAX; |
| |
| reg_value = data; |
| if (gmac4) |
| reg_value <<= GMAC4_PTP_SSIR_SSINC_SHIFT; |
| |
| writel(reg_value, ioaddr + PTP_SSIR); |
| |
| if (ssinc) |
| *ssinc = data; |
| } |
| |
| static void hwtstamp_correct_latency(struct stmmac_priv *priv) |
| { |
| void __iomem *ioaddr = priv->ptpaddr; |
| u32 reg_tsic, reg_tsicsns; |
| u32 reg_tsec, reg_tsecsns; |
| u64 scaled_ns; |
| u32 val; |
| |
| /* MAC-internal ingress latency */ |
| scaled_ns = readl(ioaddr + PTP_TS_INGR_LAT); |
| |
| /* See section 11.7.2.5.3.1 "Ingress Correction" on page 4001 of |
| * i.MX8MP Applications Processor Reference Manual Rev. 1, 06/2021 |
| */ |
| val = readl(ioaddr + PTP_TCR); |
| if (val & PTP_TCR_TSCTRLSSR) |
| /* nanoseconds field is in decimal format with granularity of 1ns/bit */ |
| scaled_ns = ((u64)NSEC_PER_SEC << 16) - scaled_ns; |
| else |
| /* nanoseconds field is in binary format with granularity of ~0.466ns/bit */ |
| scaled_ns = ((1ULL << 31) << 16) - |
| DIV_U64_ROUND_CLOSEST(scaled_ns * PSEC_PER_NSEC, 466U); |
| |
| reg_tsic = scaled_ns >> 16; |
| reg_tsicsns = scaled_ns & 0xff00; |
| |
| /* set bit 31 for 2's compliment */ |
| reg_tsic |= BIT(31); |
| |
| writel(reg_tsic, ioaddr + PTP_TS_INGR_CORR_NS); |
| writel(reg_tsicsns, ioaddr + PTP_TS_INGR_CORR_SNS); |
| |
| /* MAC-internal egress latency */ |
| scaled_ns = readl(ioaddr + PTP_TS_EGR_LAT); |
| |
| reg_tsec = scaled_ns >> 16; |
| reg_tsecsns = scaled_ns & 0xff00; |
| |
| writel(reg_tsec, ioaddr + PTP_TS_EGR_CORR_NS); |
| writel(reg_tsecsns, ioaddr + PTP_TS_EGR_CORR_SNS); |
| } |
| |
| static int init_systime(void __iomem *ioaddr, u32 sec, u32 nsec) |
| { |
| u32 value; |
| |
| writel(sec, ioaddr + PTP_STSUR); |
| writel(nsec, ioaddr + PTP_STNSUR); |
| /* issue command to initialize the system time value */ |
| value = readl(ioaddr + PTP_TCR); |
| value |= PTP_TCR_TSINIT; |
| writel(value, ioaddr + PTP_TCR); |
| |
| /* wait for present system time initialize to complete */ |
| return readl_poll_timeout_atomic(ioaddr + PTP_TCR, value, |
| !(value & PTP_TCR_TSINIT), |
| 10, 100000); |
| } |
| |
| static int config_addend(void __iomem *ioaddr, u32 addend) |
| { |
| u32 value; |
| int limit; |
| |
| writel(addend, ioaddr + PTP_TAR); |
| /* issue command to update the addend value */ |
| value = readl(ioaddr + PTP_TCR); |
| value |= PTP_TCR_TSADDREG; |
| writel(value, ioaddr + PTP_TCR); |
| |
| /* wait for present addend update to complete */ |
| limit = 10; |
| while (limit--) { |
| if (!(readl(ioaddr + PTP_TCR) & PTP_TCR_TSADDREG)) |
| break; |
| mdelay(10); |
| } |
| if (limit < 0) |
| return -EBUSY; |
| |
| return 0; |
| } |
| |
| static int adjust_systime(void __iomem *ioaddr, u32 sec, u32 nsec, |
| int add_sub, int gmac4) |
| { |
| u32 value; |
| int limit; |
| |
| if (add_sub) { |
| /* If the new sec value needs to be subtracted with |
| * the system time, then MAC_STSUR reg should be |
| * programmed with (2^32 – <new_sec_value>) |
| */ |
| if (gmac4) |
| sec = -sec; |
| |
| value = readl(ioaddr + PTP_TCR); |
| if (value & PTP_TCR_TSCTRLSSR) |
| nsec = (PTP_DIGITAL_ROLLOVER_MODE - nsec); |
| else |
| nsec = (PTP_BINARY_ROLLOVER_MODE - nsec); |
| } |
| |
| writel(sec, ioaddr + PTP_STSUR); |
| value = (add_sub << PTP_STNSUR_ADDSUB_SHIFT) | nsec; |
| writel(value, ioaddr + PTP_STNSUR); |
| |
| /* issue command to initialize the system time value */ |
| value = readl(ioaddr + PTP_TCR); |
| value |= PTP_TCR_TSUPDT; |
| writel(value, ioaddr + PTP_TCR); |
| |
| /* wait for present system time adjust/update to complete */ |
| limit = 10; |
| while (limit--) { |
| if (!(readl(ioaddr + PTP_TCR) & PTP_TCR_TSUPDT)) |
| break; |
| mdelay(10); |
| } |
| if (limit < 0) |
| return -EBUSY; |
| |
| return 0; |
| } |
| |
| static void get_systime(void __iomem *ioaddr, u64 *systime) |
| { |
| u64 ns, sec0, sec1; |
| |
| /* Get the TSS value */ |
| sec1 = readl_relaxed(ioaddr + PTP_STSR); |
| do { |
| sec0 = sec1; |
| /* Get the TSSS value */ |
| ns = readl_relaxed(ioaddr + PTP_STNSR); |
| /* Get the TSS value */ |
| sec1 = readl_relaxed(ioaddr + PTP_STSR); |
| } while (sec0 != sec1); |
| |
| if (systime) |
| *systime = ns + (sec1 * 1000000000ULL); |
| } |
| |
| static void get_ptptime(void __iomem *ptpaddr, u64 *ptp_time) |
| { |
| u64 ns; |
| |
| ns = readl(ptpaddr + PTP_ATNR); |
| ns += readl(ptpaddr + PTP_ATSR) * NSEC_PER_SEC; |
| |
| *ptp_time = ns; |
| } |
| |
| static void timestamp_interrupt(struct stmmac_priv *priv) |
| { |
| u32 num_snapshot, ts_status, tsync_int; |
| struct ptp_clock_event event; |
| u32 acr_value, channel; |
| unsigned long flags; |
| u64 ptp_time; |
| int i; |
| |
| if (priv->plat->flags & STMMAC_FLAG_INT_SNAPSHOT_EN) { |
| wake_up(&priv->tstamp_busy_wait); |
| return; |
| } |
| |
| tsync_int = readl(priv->ioaddr + GMAC_INT_STATUS) & GMAC_INT_TSIE; |
| |
| if (!tsync_int) |
| return; |
| |
| /* Read timestamp status to clear interrupt from either external |
| * timestamp or start/end of PPS. |
| */ |
| ts_status = readl(priv->ioaddr + GMAC_TIMESTAMP_STATUS); |
| |
| if (!(priv->plat->flags & STMMAC_FLAG_EXT_SNAPSHOT_EN)) |
| return; |
| |
| num_snapshot = (ts_status & GMAC_TIMESTAMP_ATSNS_MASK) >> |
| GMAC_TIMESTAMP_ATSNS_SHIFT; |
| |
| acr_value = readl(priv->ptpaddr + PTP_ACR); |
| channel = ilog2(FIELD_GET(PTP_ACR_MASK, acr_value)); |
| |
| for (i = 0; i < num_snapshot; i++) { |
| read_lock_irqsave(&priv->ptp_lock, flags); |
| get_ptptime(priv->ptpaddr, &ptp_time); |
| read_unlock_irqrestore(&priv->ptp_lock, flags); |
| event.type = PTP_CLOCK_EXTTS; |
| event.index = channel; |
| event.timestamp = ptp_time; |
| ptp_clock_event(priv->ptp_clock, &event); |
| } |
| } |
| |
| const struct stmmac_hwtimestamp stmmac_ptp = { |
| .config_hw_tstamping = config_hw_tstamping, |
| .init_systime = init_systime, |
| .config_sub_second_increment = config_sub_second_increment, |
| .config_addend = config_addend, |
| .adjust_systime = adjust_systime, |
| .get_systime = get_systime, |
| .get_ptptime = get_ptptime, |
| .timestamp_interrupt = timestamp_interrupt, |
| .hwtstamp_correct_latency = hwtstamp_correct_latency, |
| }; |