| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| |
| Broadcom B43 wireless driver |
| LED control |
| |
| Copyright (c) 2005 Martin Langer <martin-langer@gmx.de>, |
| Copyright (c) 2005 Stefano Brivio <stefano.brivio@polimi.it> |
| Copyright (c) 2005-2007 Michael Buesch <m@bues.ch> |
| Copyright (c) 2005 Danny van Dyk <kugelfang@gentoo.org> |
| Copyright (c) 2005 Andreas Jaggi <andreas.jaggi@waterwave.ch> |
| |
| |
| */ |
| |
| #include "b43.h" |
| #include "leds.h" |
| #include "rfkill.h" |
| |
| |
| static void b43_led_turn_on(struct b43_wldev *dev, u8 led_index, |
| bool activelow) |
| { |
| u16 ctl; |
| |
| ctl = b43_read16(dev, B43_MMIO_GPIO_CONTROL); |
| if (activelow) |
| ctl &= ~(1 << led_index); |
| else |
| ctl |= (1 << led_index); |
| b43_write16(dev, B43_MMIO_GPIO_CONTROL, ctl); |
| } |
| |
| static void b43_led_turn_off(struct b43_wldev *dev, u8 led_index, |
| bool activelow) |
| { |
| u16 ctl; |
| |
| ctl = b43_read16(dev, B43_MMIO_GPIO_CONTROL); |
| if (activelow) |
| ctl |= (1 << led_index); |
| else |
| ctl &= ~(1 << led_index); |
| b43_write16(dev, B43_MMIO_GPIO_CONTROL, ctl); |
| } |
| |
| static void b43_led_update(struct b43_wldev *dev, |
| struct b43_led *led) |
| { |
| bool radio_enabled; |
| bool turn_on; |
| |
| if (!led->wl) |
| return; |
| |
| radio_enabled = (dev->phy.radio_on && dev->radio_hw_enable); |
| |
| /* The led->state read is racy, but we don't care. In case we raced |
| * with the brightness_set handler, we will be called again soon |
| * to fixup our state. */ |
| if (radio_enabled) |
| turn_on = atomic_read(&led->state) != LED_OFF; |
| else |
| turn_on = false; |
| if (turn_on == led->hw_state) |
| return; |
| led->hw_state = turn_on; |
| |
| if (turn_on) |
| b43_led_turn_on(dev, led->index, led->activelow); |
| else |
| b43_led_turn_off(dev, led->index, led->activelow); |
| } |
| |
| static void b43_leds_work(struct work_struct *work) |
| { |
| struct b43_leds *leds = container_of(work, struct b43_leds, work); |
| struct b43_wl *wl = container_of(leds, struct b43_wl, leds); |
| struct b43_wldev *dev; |
| |
| mutex_lock(&wl->mutex); |
| dev = wl->current_dev; |
| if (unlikely(!dev || b43_status(dev) < B43_STAT_STARTED)) |
| goto out_unlock; |
| |
| b43_led_update(dev, &wl->leds.led_tx); |
| b43_led_update(dev, &wl->leds.led_rx); |
| b43_led_update(dev, &wl->leds.led_radio); |
| b43_led_update(dev, &wl->leds.led_assoc); |
| |
| out_unlock: |
| mutex_unlock(&wl->mutex); |
| } |
| |
| /* Callback from the LED subsystem. */ |
| static void b43_led_brightness_set(struct led_classdev *led_dev, |
| enum led_brightness brightness) |
| { |
| struct b43_led *led = container_of(led_dev, struct b43_led, led_dev); |
| struct b43_wl *wl = led->wl; |
| |
| if (likely(!wl->leds.stop)) { |
| atomic_set(&led->state, brightness); |
| ieee80211_queue_work(wl->hw, &wl->leds.work); |
| } |
| } |
| |
| static int b43_register_led(struct b43_wldev *dev, struct b43_led *led, |
| const char *name, const char *default_trigger, |
| u8 led_index, bool activelow) |
| { |
| int err; |
| |
| if (led->wl) |
| return -EEXIST; |
| if (!default_trigger) |
| return -EINVAL; |
| led->wl = dev->wl; |
| led->index = led_index; |
| led->activelow = activelow; |
| strscpy(led->name, name, sizeof(led->name)); |
| atomic_set(&led->state, 0); |
| |
| led->led_dev.name = led->name; |
| led->led_dev.default_trigger = default_trigger; |
| led->led_dev.brightness_set = b43_led_brightness_set; |
| |
| err = led_classdev_register(dev->dev->dev, &led->led_dev); |
| if (err) { |
| b43warn(dev->wl, "LEDs: Failed to register %s\n", name); |
| led->wl = NULL; |
| return err; |
| } |
| |
| return 0; |
| } |
| |
| static void b43_unregister_led(struct b43_led *led) |
| { |
| if (!led->wl) |
| return; |
| led_classdev_unregister(&led->led_dev); |
| led->wl = NULL; |
| } |
| |
| static void b43_map_led(struct b43_wldev *dev, |
| u8 led_index, |
| enum b43_led_behaviour behaviour, |
| bool activelow) |
| { |
| struct ieee80211_hw *hw = dev->wl->hw; |
| char name[B43_LED_MAX_NAME_LEN + 1]; |
| |
| /* Map the b43 specific LED behaviour value to the |
| * generic LED triggers. */ |
| switch (behaviour) { |
| case B43_LED_INACTIVE: |
| case B43_LED_OFF: |
| case B43_LED_ON: |
| break; |
| case B43_LED_ACTIVITY: |
| case B43_LED_TRANSFER: |
| case B43_LED_APTRANSFER: |
| snprintf(name, sizeof(name), |
| "b43-%s::tx", wiphy_name(hw->wiphy)); |
| b43_register_led(dev, &dev->wl->leds.led_tx, name, |
| ieee80211_get_tx_led_name(hw), |
| led_index, activelow); |
| snprintf(name, sizeof(name), |
| "b43-%s::rx", wiphy_name(hw->wiphy)); |
| b43_register_led(dev, &dev->wl->leds.led_rx, name, |
| ieee80211_get_rx_led_name(hw), |
| led_index, activelow); |
| break; |
| case B43_LED_RADIO_ALL: |
| case B43_LED_RADIO_A: |
| case B43_LED_RADIO_B: |
| case B43_LED_MODE_BG: |
| snprintf(name, sizeof(name), |
| "b43-%s::radio", wiphy_name(hw->wiphy)); |
| b43_register_led(dev, &dev->wl->leds.led_radio, name, |
| ieee80211_get_radio_led_name(hw), |
| led_index, activelow); |
| break; |
| case B43_LED_WEIRD: |
| case B43_LED_ASSOC: |
| snprintf(name, sizeof(name), |
| "b43-%s::assoc", wiphy_name(hw->wiphy)); |
| b43_register_led(dev, &dev->wl->leds.led_assoc, name, |
| ieee80211_get_assoc_led_name(hw), |
| led_index, activelow); |
| break; |
| default: |
| b43warn(dev->wl, "LEDs: Unknown behaviour 0x%02X\n", |
| behaviour); |
| break; |
| } |
| } |
| |
| static void b43_led_get_sprominfo(struct b43_wldev *dev, |
| unsigned int led_index, |
| enum b43_led_behaviour *behaviour, |
| bool *activelow) |
| { |
| u8 sprom[4]; |
| |
| sprom[0] = dev->dev->bus_sprom->gpio0; |
| sprom[1] = dev->dev->bus_sprom->gpio1; |
| sprom[2] = dev->dev->bus_sprom->gpio2; |
| sprom[3] = dev->dev->bus_sprom->gpio3; |
| |
| if ((sprom[0] & sprom[1] & sprom[2] & sprom[3]) == 0xff) { |
| /* There is no LED information in the SPROM |
| * for this LED. Hardcode it here. */ |
| *activelow = false; |
| switch (led_index) { |
| case 0: |
| *behaviour = B43_LED_ACTIVITY; |
| *activelow = true; |
| if (dev->dev->board_vendor == PCI_VENDOR_ID_COMPAQ) |
| *behaviour = B43_LED_RADIO_ALL; |
| break; |
| case 1: |
| *behaviour = B43_LED_RADIO_B; |
| if (dev->dev->board_vendor == PCI_VENDOR_ID_ASUSTEK) |
| *behaviour = B43_LED_ASSOC; |
| break; |
| case 2: |
| *behaviour = B43_LED_RADIO_A; |
| break; |
| case 3: |
| *behaviour = B43_LED_OFF; |
| break; |
| default: |
| *behaviour = B43_LED_OFF; |
| B43_WARN_ON(1); |
| return; |
| } |
| } else { |
| /* keep LED disabled if no mapping is defined */ |
| if (sprom[led_index] == 0xff) |
| *behaviour = B43_LED_OFF; |
| else |
| *behaviour = sprom[led_index] & B43_LED_BEHAVIOUR; |
| *activelow = !!(sprom[led_index] & B43_LED_ACTIVELOW); |
| } |
| } |
| |
| void b43_leds_init(struct b43_wldev *dev) |
| { |
| struct b43_led *led; |
| unsigned int i; |
| enum b43_led_behaviour behaviour; |
| bool activelow; |
| |
| /* Sync the RF-kill LED state (if we have one) with radio and switch states. */ |
| led = &dev->wl->leds.led_radio; |
| if (led->wl) { |
| if (dev->phy.radio_on && b43_is_hw_radio_enabled(dev)) { |
| b43_led_turn_on(dev, led->index, led->activelow); |
| led->hw_state = true; |
| atomic_set(&led->state, 1); |
| } else { |
| b43_led_turn_off(dev, led->index, led->activelow); |
| led->hw_state = false; |
| atomic_set(&led->state, 0); |
| } |
| } |
| |
| /* Initialize TX/RX/ASSOC leds */ |
| led = &dev->wl->leds.led_tx; |
| if (led->wl) { |
| b43_led_turn_off(dev, led->index, led->activelow); |
| led->hw_state = false; |
| atomic_set(&led->state, 0); |
| } |
| led = &dev->wl->leds.led_rx; |
| if (led->wl) { |
| b43_led_turn_off(dev, led->index, led->activelow); |
| led->hw_state = false; |
| atomic_set(&led->state, 0); |
| } |
| led = &dev->wl->leds.led_assoc; |
| if (led->wl) { |
| b43_led_turn_off(dev, led->index, led->activelow); |
| led->hw_state = false; |
| atomic_set(&led->state, 0); |
| } |
| |
| /* Initialize other LED states. */ |
| for (i = 0; i < B43_MAX_NR_LEDS; i++) { |
| b43_led_get_sprominfo(dev, i, &behaviour, &activelow); |
| switch (behaviour) { |
| case B43_LED_OFF: |
| b43_led_turn_off(dev, i, activelow); |
| break; |
| case B43_LED_ON: |
| b43_led_turn_on(dev, i, activelow); |
| break; |
| default: |
| /* Leave others as-is. */ |
| break; |
| } |
| } |
| |
| dev->wl->leds.stop = 0; |
| } |
| |
| void b43_leds_exit(struct b43_wldev *dev) |
| { |
| struct b43_leds *leds = &dev->wl->leds; |
| |
| b43_led_turn_off(dev, leds->led_tx.index, leds->led_tx.activelow); |
| b43_led_turn_off(dev, leds->led_rx.index, leds->led_rx.activelow); |
| b43_led_turn_off(dev, leds->led_assoc.index, leds->led_assoc.activelow); |
| b43_led_turn_off(dev, leds->led_radio.index, leds->led_radio.activelow); |
| } |
| |
| void b43_leds_stop(struct b43_wldev *dev) |
| { |
| struct b43_leds *leds = &dev->wl->leds; |
| |
| leds->stop = 1; |
| cancel_work_sync(&leds->work); |
| } |
| |
| void b43_leds_register(struct b43_wldev *dev) |
| { |
| unsigned int i; |
| enum b43_led_behaviour behaviour; |
| bool activelow; |
| |
| INIT_WORK(&dev->wl->leds.work, b43_leds_work); |
| |
| /* Register the LEDs to the LED subsystem. */ |
| for (i = 0; i < B43_MAX_NR_LEDS; i++) { |
| b43_led_get_sprominfo(dev, i, &behaviour, &activelow); |
| b43_map_led(dev, i, behaviour, activelow); |
| } |
| } |
| |
| void b43_leds_unregister(struct b43_wl *wl) |
| { |
| struct b43_leds *leds = &wl->leds; |
| |
| b43_unregister_led(&leds->led_tx); |
| b43_unregister_led(&leds->led_rx); |
| b43_unregister_led(&leds->led_assoc); |
| b43_unregister_led(&leds->led_radio); |
| } |