| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (c) 2021 pureLiFi |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/device.h> |
| #include <linux/errno.h> |
| #include <linux/slab.h> |
| #include <linux/skbuff.h> |
| #include <linux/usb.h> |
| #include <linux/workqueue.h> |
| #include <linux/proc_fs.h> |
| #include <linux/fs.h> |
| #include <linux/string.h> |
| #include <linux/module.h> |
| #include <net/mac80211.h> |
| #include <linux/unaligned.h> |
| #include <linux/sysfs.h> |
| |
| #include "mac.h" |
| #include "usb.h" |
| #include "chip.h" |
| |
| static const struct usb_device_id usb_ids[] = { |
| { USB_DEVICE(PURELIFI_X_VENDOR_ID_0, PURELIFI_X_PRODUCT_ID_0), |
| .driver_info = DEVICE_LIFI_X }, |
| { USB_DEVICE(PURELIFI_XC_VENDOR_ID_0, PURELIFI_XC_PRODUCT_ID_0), |
| .driver_info = DEVICE_LIFI_XC }, |
| { USB_DEVICE(PURELIFI_XL_VENDOR_ID_0, PURELIFI_XL_PRODUCT_ID_0), |
| .driver_info = DEVICE_LIFI_XL }, |
| {} |
| }; |
| |
| void plfxlc_send_packet_from_data_queue(struct plfxlc_usb *usb) |
| { |
| struct plfxlc_usb_tx *tx = &usb->tx; |
| struct sk_buff *skb = NULL; |
| unsigned long flags; |
| u8 last_served_sidx; |
| |
| spin_lock_irqsave(&tx->lock, flags); |
| last_served_sidx = usb->sidx; |
| do { |
| usb->sidx = (usb->sidx + 1) % MAX_STA_NUM; |
| if (!(tx->station[usb->sidx].flag & STATION_CONNECTED_FLAG)) |
| continue; |
| if (!(tx->station[usb->sidx].flag & STATION_FIFO_FULL_FLAG)) |
| skb = skb_peek(&tx->station[usb->sidx].data_list); |
| } while ((usb->sidx != last_served_sidx) && (!skb)); |
| |
| if (skb) { |
| skb = skb_dequeue(&tx->station[usb->sidx].data_list); |
| plfxlc_usb_wreq_async(usb, skb->data, skb->len, USB_REQ_DATA_TX, |
| plfxlc_tx_urb_complete, skb); |
| if (skb_queue_len(&tx->station[usb->sidx].data_list) <= 60) |
| ieee80211_wake_queues(plfxlc_usb_to_hw(usb)); |
| } |
| spin_unlock_irqrestore(&tx->lock, flags); |
| } |
| |
| static void handle_rx_packet(struct plfxlc_usb *usb, const u8 *buffer, |
| unsigned int length) |
| { |
| plfxlc_mac_rx(plfxlc_usb_to_hw(usb), buffer, length); |
| } |
| |
| static void rx_urb_complete(struct urb *urb) |
| { |
| struct plfxlc_usb_tx *tx; |
| struct plfxlc_usb *usb; |
| unsigned int length; |
| const u8 *buffer; |
| u16 status; |
| u8 sidx; |
| int r; |
| |
| if (!urb) { |
| pr_err("urb is NULL\n"); |
| return; |
| } |
| if (!urb->context) { |
| pr_err("urb ctx is NULL\n"); |
| return; |
| } |
| usb = urb->context; |
| |
| if (usb->initialized != 1) { |
| pr_err("usb is not initialized\n"); |
| return; |
| } |
| |
| tx = &usb->tx; |
| switch (urb->status) { |
| case 0: |
| break; |
| case -ESHUTDOWN: |
| case -EINVAL: |
| case -ENODEV: |
| case -ENOENT: |
| case -ECONNRESET: |
| case -EPIPE: |
| dev_dbg(plfxlc_urb_dev(urb), "urb %p error %d\n", urb, urb->status); |
| return; |
| default: |
| dev_dbg(plfxlc_urb_dev(urb), "urb %p error %d\n", urb, urb->status); |
| if (tx->submitted_urbs++ < PURELIFI_URB_RETRY_MAX) { |
| dev_dbg(plfxlc_urb_dev(urb), "urb %p resubmit %d", urb, |
| tx->submitted_urbs++); |
| goto resubmit; |
| } else { |
| dev_dbg(plfxlc_urb_dev(urb), "urb %p max resubmits reached", urb); |
| tx->submitted_urbs = 0; |
| return; |
| } |
| } |
| |
| buffer = urb->transfer_buffer; |
| length = le32_to_cpu(*(__le32 *)(buffer + sizeof(struct rx_status))) |
| + sizeof(u32); |
| |
| if (urb->actual_length != (PLF_MSG_STATUS_OFFSET + 1)) { |
| if (usb->initialized && usb->link_up) |
| handle_rx_packet(usb, buffer, length); |
| goto resubmit; |
| } |
| |
| status = buffer[PLF_MSG_STATUS_OFFSET]; |
| |
| switch (status) { |
| case STATION_FIFO_ALMOST_FULL_NOT_MESSAGE: |
| dev_dbg(&usb->intf->dev, |
| "FIFO full not packet receipt\n"); |
| tx->mac_fifo_full = 1; |
| for (sidx = 0; sidx < MAX_STA_NUM; sidx++) |
| tx->station[sidx].flag |= STATION_FIFO_FULL_FLAG; |
| break; |
| case STATION_FIFO_ALMOST_FULL_MESSAGE: |
| dev_dbg(&usb->intf->dev, "FIFO full packet receipt\n"); |
| |
| for (sidx = 0; sidx < MAX_STA_NUM; sidx++) |
| tx->station[sidx].flag &= STATION_ACTIVE_FLAG; |
| |
| plfxlc_send_packet_from_data_queue(usb); |
| break; |
| case STATION_CONNECT_MESSAGE: |
| usb->link_up = 1; |
| dev_dbg(&usb->intf->dev, "ST_CONNECT_MSG packet receipt\n"); |
| break; |
| case STATION_DISCONNECT_MESSAGE: |
| usb->link_up = 0; |
| dev_dbg(&usb->intf->dev, "ST_DISCONN_MSG packet receipt\n"); |
| break; |
| default: |
| dev_dbg(&usb->intf->dev, "Unknown packet receipt\n"); |
| break; |
| } |
| |
| resubmit: |
| r = usb_submit_urb(urb, GFP_ATOMIC); |
| if (r) |
| dev_dbg(plfxlc_urb_dev(urb), "urb %p resubmit fail (%d)\n", urb, r); |
| } |
| |
| static struct urb *alloc_rx_urb(struct plfxlc_usb *usb) |
| { |
| struct usb_device *udev = plfxlc_usb_to_usbdev(usb); |
| struct urb *urb; |
| void *buffer; |
| |
| urb = usb_alloc_urb(0, GFP_KERNEL); |
| if (!urb) |
| return NULL; |
| |
| buffer = usb_alloc_coherent(udev, USB_MAX_RX_SIZE, GFP_KERNEL, |
| &urb->transfer_dma); |
| if (!buffer) { |
| usb_free_urb(urb); |
| return NULL; |
| } |
| |
| usb_fill_bulk_urb(urb, udev, usb_rcvbulkpipe(udev, EP_DATA_IN), |
| buffer, USB_MAX_RX_SIZE, |
| rx_urb_complete, usb); |
| urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; |
| |
| return urb; |
| } |
| |
| static void free_rx_urb(struct urb *urb) |
| { |
| if (!urb) |
| return; |
| usb_free_coherent(urb->dev, urb->transfer_buffer_length, |
| urb->transfer_buffer, urb->transfer_dma); |
| usb_free_urb(urb); |
| } |
| |
| static int __lf_x_usb_enable_rx(struct plfxlc_usb *usb) |
| { |
| struct plfxlc_usb_rx *rx = &usb->rx; |
| struct urb **urbs; |
| int i, r; |
| |
| r = -ENOMEM; |
| urbs = kcalloc(RX_URBS_COUNT, sizeof(struct urb *), GFP_KERNEL); |
| if (!urbs) |
| goto error; |
| |
| for (i = 0; i < RX_URBS_COUNT; i++) { |
| urbs[i] = alloc_rx_urb(usb); |
| if (!urbs[i]) |
| goto error; |
| } |
| |
| spin_lock_irq(&rx->lock); |
| |
| dev_dbg(plfxlc_usb_dev(usb), "irq_disabled %d\n", irqs_disabled()); |
| |
| if (rx->urbs) { |
| spin_unlock_irq(&rx->lock); |
| r = 0; |
| goto error; |
| } |
| rx->urbs = urbs; |
| rx->urbs_count = RX_URBS_COUNT; |
| spin_unlock_irq(&rx->lock); |
| |
| for (i = 0; i < RX_URBS_COUNT; i++) { |
| r = usb_submit_urb(urbs[i], GFP_KERNEL); |
| if (r) |
| goto error_submit; |
| } |
| |
| return 0; |
| |
| error_submit: |
| for (i = 0; i < RX_URBS_COUNT; i++) |
| usb_kill_urb(urbs[i]); |
| spin_lock_irq(&rx->lock); |
| rx->urbs = NULL; |
| rx->urbs_count = 0; |
| spin_unlock_irq(&rx->lock); |
| error: |
| if (urbs) { |
| for (i = 0; i < RX_URBS_COUNT; i++) |
| free_rx_urb(urbs[i]); |
| } |
| kfree(urbs); |
| return r; |
| } |
| |
| int plfxlc_usb_enable_rx(struct plfxlc_usb *usb) |
| { |
| struct plfxlc_usb_rx *rx = &usb->rx; |
| int r; |
| |
| mutex_lock(&rx->setup_mutex); |
| r = __lf_x_usb_enable_rx(usb); |
| if (!r) |
| usb->rx_usb_enabled = 1; |
| |
| mutex_unlock(&rx->setup_mutex); |
| |
| return r; |
| } |
| |
| static void __lf_x_usb_disable_rx(struct plfxlc_usb *usb) |
| { |
| struct plfxlc_usb_rx *rx = &usb->rx; |
| unsigned long flags; |
| unsigned int count; |
| struct urb **urbs; |
| int i; |
| |
| spin_lock_irqsave(&rx->lock, flags); |
| urbs = rx->urbs; |
| count = rx->urbs_count; |
| spin_unlock_irqrestore(&rx->lock, flags); |
| |
| if (!urbs) |
| return; |
| |
| for (i = 0; i < count; i++) { |
| usb_kill_urb(urbs[i]); |
| free_rx_urb(urbs[i]); |
| } |
| kfree(urbs); |
| rx->urbs = NULL; |
| rx->urbs_count = 0; |
| } |
| |
| void plfxlc_usb_disable_rx(struct plfxlc_usb *usb) |
| { |
| struct plfxlc_usb_rx *rx = &usb->rx; |
| |
| mutex_lock(&rx->setup_mutex); |
| __lf_x_usb_disable_rx(usb); |
| usb->rx_usb_enabled = 0; |
| mutex_unlock(&rx->setup_mutex); |
| } |
| |
| void plfxlc_usb_disable_tx(struct plfxlc_usb *usb) |
| { |
| struct plfxlc_usb_tx *tx = &usb->tx; |
| unsigned long flags; |
| |
| clear_bit(PLF_BIT_ENABLED, &tx->enabled); |
| |
| /* kill all submitted tx-urbs */ |
| usb_kill_anchored_urbs(&tx->submitted); |
| |
| spin_lock_irqsave(&tx->lock, flags); |
| WARN_ON(!skb_queue_empty(&tx->submitted_skbs)); |
| WARN_ON(tx->submitted_urbs != 0); |
| tx->submitted_urbs = 0; |
| spin_unlock_irqrestore(&tx->lock, flags); |
| |
| /* The stopped state is ignored, relying on ieee80211_wake_queues() |
| * in a potentionally following plfxlc_usb_enable_tx(). |
| */ |
| } |
| |
| void plfxlc_usb_enable_tx(struct plfxlc_usb *usb) |
| { |
| struct plfxlc_usb_tx *tx = &usb->tx; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&tx->lock, flags); |
| set_bit(PLF_BIT_ENABLED, &tx->enabled); |
| tx->submitted_urbs = 0; |
| ieee80211_wake_queues(plfxlc_usb_to_hw(usb)); |
| tx->stopped = 0; |
| spin_unlock_irqrestore(&tx->lock, flags); |
| } |
| |
| void plfxlc_tx_urb_complete(struct urb *urb) |
| { |
| struct ieee80211_tx_info *info; |
| struct plfxlc_usb *usb; |
| struct sk_buff *skb; |
| |
| skb = urb->context; |
| info = IEEE80211_SKB_CB(skb); |
| /* grab 'usb' pointer before handing off the skb (since |
| * it might be freed by plfxlc_mac_tx_to_dev or mac80211) |
| */ |
| usb = &plfxlc_hw_mac(info->rate_driver_data[0])->chip.usb; |
| |
| switch (urb->status) { |
| case 0: |
| break; |
| case -ESHUTDOWN: |
| case -EINVAL: |
| case -ENODEV: |
| case -ENOENT: |
| case -ECONNRESET: |
| case -EPIPE: |
| dev_dbg(plfxlc_urb_dev(urb), "urb %p error %d\n", urb, urb->status); |
| break; |
| default: |
| dev_dbg(plfxlc_urb_dev(urb), "urb %p error %d\n", urb, urb->status); |
| return; |
| } |
| |
| plfxlc_mac_tx_to_dev(skb, urb->status); |
| plfxlc_send_packet_from_data_queue(usb); |
| usb_free_urb(urb); |
| } |
| |
| static inline void init_usb_rx(struct plfxlc_usb *usb) |
| { |
| struct plfxlc_usb_rx *rx = &usb->rx; |
| |
| spin_lock_init(&rx->lock); |
| mutex_init(&rx->setup_mutex); |
| |
| if (interface_to_usbdev(usb->intf)->speed == USB_SPEED_HIGH) |
| rx->usb_packet_size = 512; |
| else |
| rx->usb_packet_size = 64; |
| |
| if (rx->fragment_length != 0) |
| dev_dbg(plfxlc_usb_dev(usb), "fragment_length error\n"); |
| } |
| |
| static inline void init_usb_tx(struct plfxlc_usb *usb) |
| { |
| struct plfxlc_usb_tx *tx = &usb->tx; |
| |
| spin_lock_init(&tx->lock); |
| clear_bit(PLF_BIT_ENABLED, &tx->enabled); |
| tx->stopped = 0; |
| skb_queue_head_init(&tx->submitted_skbs); |
| init_usb_anchor(&tx->submitted); |
| } |
| |
| void plfxlc_usb_init(struct plfxlc_usb *usb, struct ieee80211_hw *hw, |
| struct usb_interface *intf) |
| { |
| memset(usb, 0, sizeof(*usb)); |
| usb->intf = usb_get_intf(intf); |
| usb_set_intfdata(usb->intf, hw); |
| init_usb_tx(usb); |
| init_usb_rx(usb); |
| } |
| |
| void plfxlc_usb_release(struct plfxlc_usb *usb) |
| { |
| plfxlc_op_stop(plfxlc_usb_to_hw(usb), false); |
| plfxlc_usb_disable_tx(usb); |
| plfxlc_usb_disable_rx(usb); |
| usb_set_intfdata(usb->intf, NULL); |
| usb_put_intf(usb->intf); |
| } |
| |
| const char *plfxlc_speed(enum usb_device_speed speed) |
| { |
| switch (speed) { |
| case USB_SPEED_LOW: |
| return "low"; |
| case USB_SPEED_FULL: |
| return "full"; |
| case USB_SPEED_HIGH: |
| return "high"; |
| default: |
| return "unknown"; |
| } |
| } |
| |
| int plfxlc_usb_init_hw(struct plfxlc_usb *usb) |
| { |
| int r; |
| |
| r = usb_reset_configuration(plfxlc_usb_to_usbdev(usb)); |
| if (r) { |
| dev_err(plfxlc_usb_dev(usb), "cfg reset failed (%d)\n", r); |
| return r; |
| } |
| return 0; |
| } |
| |
| static void get_usb_req(struct usb_device *udev, void *buffer, |
| u32 buffer_len, enum plf_usb_req_enum usb_req_id, |
| struct plf_usb_req *usb_req) |
| { |
| __be32 payload_len_nw = cpu_to_be32(buffer_len + FCS_LEN); |
| const u8 *buffer_src_p = buffer; |
| u8 *buffer_dst = usb_req->buf; |
| u32 temp_usb_len = 0; |
| |
| usb_req->id = cpu_to_be32(usb_req_id); |
| usb_req->len = cpu_to_be32(0); |
| |
| /* Copy buffer length into the transmitted buffer, as it is important |
| * for the Rx MAC to know its exact length. |
| */ |
| if (usb_req->id == cpu_to_be32(USB_REQ_BEACON_WR)) { |
| memcpy(buffer_dst, &payload_len_nw, sizeof(payload_len_nw)); |
| buffer_dst += sizeof(payload_len_nw); |
| temp_usb_len += sizeof(payload_len_nw); |
| } |
| |
| memcpy(buffer_dst, buffer_src_p, buffer_len); |
| buffer_dst += buffer_len; |
| buffer_src_p += buffer_len; |
| temp_usb_len += buffer_len; |
| |
| /* Set the FCS_LEN (4) bytes as 0 for CRC checking. */ |
| memset(buffer_dst, 0, FCS_LEN); |
| buffer_dst += FCS_LEN; |
| temp_usb_len += FCS_LEN; |
| |
| /* Round the packet to be transmitted to 4 bytes. */ |
| if (temp_usb_len % PURELIFI_BYTE_NUM_ALIGNMENT) { |
| memset(buffer_dst, 0, PURELIFI_BYTE_NUM_ALIGNMENT - |
| (temp_usb_len % |
| PURELIFI_BYTE_NUM_ALIGNMENT)); |
| buffer_dst += PURELIFI_BYTE_NUM_ALIGNMENT - |
| (temp_usb_len % |
| PURELIFI_BYTE_NUM_ALIGNMENT); |
| temp_usb_len += PURELIFI_BYTE_NUM_ALIGNMENT - |
| (temp_usb_len % PURELIFI_BYTE_NUM_ALIGNMENT); |
| } |
| |
| usb_req->len = cpu_to_be32(temp_usb_len); |
| } |
| |
| int plfxlc_usb_wreq_async(struct plfxlc_usb *usb, const u8 *buffer, |
| int buffer_len, enum plf_usb_req_enum usb_req_id, |
| usb_complete_t complete_fn, |
| void *context) |
| { |
| struct usb_device *udev = interface_to_usbdev(usb->ez_usb); |
| struct urb *urb; |
| int r; |
| |
| urb = usb_alloc_urb(0, GFP_ATOMIC); |
| if (!urb) |
| return -ENOMEM; |
| usb_fill_bulk_urb(urb, udev, usb_sndbulkpipe(udev, EP_DATA_OUT), |
| (void *)buffer, buffer_len, complete_fn, context); |
| |
| r = usb_submit_urb(urb, GFP_ATOMIC); |
| if (r) |
| dev_err(&udev->dev, "Async write submit failed (%d)\n", r); |
| |
| return r; |
| } |
| |
| int plfxlc_usb_wreq(struct usb_interface *ez_usb, void *buffer, int buffer_len, |
| enum plf_usb_req_enum usb_req_id) |
| { |
| struct usb_device *udev = interface_to_usbdev(ez_usb); |
| unsigned char *dma_buffer = NULL; |
| struct plf_usb_req usb_req; |
| int usb_bulk_msg_len; |
| int actual_length; |
| int r; |
| |
| get_usb_req(udev, buffer, buffer_len, usb_req_id, &usb_req); |
| usb_bulk_msg_len = sizeof(__le32) + sizeof(__le32) + |
| be32_to_cpu(usb_req.len); |
| |
| dma_buffer = kmemdup(&usb_req, usb_bulk_msg_len, GFP_KERNEL); |
| |
| if (!dma_buffer) { |
| r = -ENOMEM; |
| goto error; |
| } |
| |
| r = usb_bulk_msg(udev, |
| usb_sndbulkpipe(udev, EP_DATA_OUT), |
| dma_buffer, usb_bulk_msg_len, |
| &actual_length, USB_BULK_MSG_TIMEOUT_MS); |
| kfree(dma_buffer); |
| error: |
| if (r) { |
| r = -ENOMEM; |
| dev_err(&udev->dev, "usb_bulk_msg failed (%d)\n", r); |
| } |
| |
| return r; |
| } |
| |
| static void slif_data_plane_sap_timer_callb(struct timer_list *t) |
| { |
| struct plfxlc_usb *usb = from_timer(usb, t, tx.tx_retry_timer); |
| |
| plfxlc_send_packet_from_data_queue(usb); |
| timer_setup(&usb->tx.tx_retry_timer, |
| slif_data_plane_sap_timer_callb, 0); |
| mod_timer(&usb->tx.tx_retry_timer, jiffies + TX_RETRY_BACKOFF_JIFF); |
| } |
| |
| static void sta_queue_cleanup_timer_callb(struct timer_list *t) |
| { |
| struct plfxlc_usb *usb = from_timer(usb, t, sta_queue_cleanup); |
| struct plfxlc_usb_tx *tx = &usb->tx; |
| int sidx; |
| |
| for (sidx = 0; sidx < MAX_STA_NUM - 1; sidx++) { |
| if (!(tx->station[sidx].flag & STATION_CONNECTED_FLAG)) |
| continue; |
| if (tx->station[sidx].flag & STATION_HEARTBEAT_FLAG) { |
| tx->station[sidx].flag ^= STATION_HEARTBEAT_FLAG; |
| } else { |
| eth_zero_addr(tx->station[sidx].mac); |
| tx->station[sidx].flag = 0; |
| } |
| } |
| timer_setup(&usb->sta_queue_cleanup, |
| sta_queue_cleanup_timer_callb, 0); |
| mod_timer(&usb->sta_queue_cleanup, jiffies + STA_QUEUE_CLEANUP_JIFF); |
| } |
| |
| static int probe(struct usb_interface *intf, |
| const struct usb_device_id *id) |
| { |
| u8 serial_number[PURELIFI_SERIAL_LEN]; |
| struct ieee80211_hw *hw = NULL; |
| struct plfxlc_usb_tx *tx; |
| struct plfxlc_chip *chip; |
| struct plfxlc_usb *usb; |
| u8 hw_address[ETH_ALEN]; |
| unsigned int i; |
| int r = 0; |
| |
| hw = plfxlc_mac_alloc_hw(intf); |
| |
| if (!hw) { |
| r = -ENOMEM; |
| goto error; |
| } |
| |
| chip = &plfxlc_hw_mac(hw)->chip; |
| usb = &chip->usb; |
| usb->ez_usb = intf; |
| tx = &usb->tx; |
| |
| r = plfxlc_upload_mac_and_serial(intf, hw_address, serial_number); |
| if (r) { |
| dev_err(&intf->dev, "MAC and Serial upload failed (%d)\n", r); |
| goto error; |
| } |
| |
| chip->unit_type = STA; |
| dev_err(&intf->dev, "Unit type is station"); |
| |
| r = plfxlc_mac_preinit_hw(hw, hw_address); |
| if (r) { |
| dev_err(&intf->dev, "Init mac failed (%d)\n", r); |
| goto error; |
| } |
| |
| r = ieee80211_register_hw(hw); |
| if (r) { |
| dev_err(&intf->dev, "Register device failed (%d)\n", r); |
| goto error; |
| } |
| |
| if ((le16_to_cpu(interface_to_usbdev(intf)->descriptor.idVendor) == |
| PURELIFI_XL_VENDOR_ID_0) && |
| (le16_to_cpu(interface_to_usbdev(intf)->descriptor.idProduct) == |
| PURELIFI_XL_PRODUCT_ID_0)) { |
| r = plfxlc_download_xl_firmware(intf); |
| } else { |
| r = plfxlc_download_fpga(intf); |
| } |
| if (r != 0) { |
| dev_err(&intf->dev, "FPGA download failed (%d)\n", r); |
| goto error; |
| } |
| |
| tx->mac_fifo_full = 0; |
| spin_lock_init(&tx->lock); |
| |
| msleep(PLF_MSLEEP_TIME); |
| r = plfxlc_usb_init_hw(usb); |
| if (r < 0) { |
| dev_err(&intf->dev, "usb_init_hw failed (%d)\n", r); |
| goto error; |
| } |
| |
| msleep(PLF_MSLEEP_TIME); |
| r = plfxlc_chip_switch_radio(chip, PLFXLC_RADIO_ON); |
| if (r < 0) { |
| dev_dbg(&intf->dev, "chip_switch_radio_on failed (%d)\n", r); |
| goto error; |
| } |
| |
| msleep(PLF_MSLEEP_TIME); |
| r = plfxlc_chip_set_rate(chip, 8); |
| if (r < 0) { |
| dev_dbg(&intf->dev, "chip_set_rate failed (%d)\n", r); |
| goto error; |
| } |
| |
| msleep(PLF_MSLEEP_TIME); |
| r = plfxlc_usb_wreq(usb->ez_usb, |
| hw_address, ETH_ALEN, USB_REQ_MAC_WR); |
| if (r < 0) { |
| dev_dbg(&intf->dev, "MAC_WR failure (%d)\n", r); |
| goto error; |
| } |
| |
| plfxlc_chip_enable_rxtx(chip); |
| |
| /* Initialise the data plane Tx queue */ |
| for (i = 0; i < MAX_STA_NUM; i++) { |
| skb_queue_head_init(&tx->station[i].data_list); |
| tx->station[i].flag = 0; |
| } |
| |
| tx->station[STA_BROADCAST_INDEX].flag |= STATION_CONNECTED_FLAG; |
| for (i = 0; i < ETH_ALEN; i++) |
| tx->station[STA_BROADCAST_INDEX].mac[i] = 0xFF; |
| |
| timer_setup(&tx->tx_retry_timer, slif_data_plane_sap_timer_callb, 0); |
| tx->tx_retry_timer.expires = jiffies + TX_RETRY_BACKOFF_JIFF; |
| add_timer(&tx->tx_retry_timer); |
| |
| timer_setup(&usb->sta_queue_cleanup, |
| sta_queue_cleanup_timer_callb, 0); |
| usb->sta_queue_cleanup.expires = jiffies + STA_QUEUE_CLEANUP_JIFF; |
| add_timer(&usb->sta_queue_cleanup); |
| |
| plfxlc_mac_init_hw(hw); |
| usb->initialized = true; |
| return 0; |
| error: |
| if (hw) { |
| plfxlc_mac_release(plfxlc_hw_mac(hw)); |
| ieee80211_unregister_hw(hw); |
| ieee80211_free_hw(hw); |
| } |
| dev_err(&intf->dev, "pureLifi:Device error"); |
| return r; |
| } |
| |
| static void disconnect(struct usb_interface *intf) |
| { |
| struct ieee80211_hw *hw = plfxlc_intf_to_hw(intf); |
| struct plfxlc_mac *mac; |
| struct plfxlc_usb *usb; |
| |
| /* Either something really bad happened, or |
| * we're just dealing with a DEVICE_INSTALLER. |
| */ |
| if (!hw) |
| return; |
| |
| mac = plfxlc_hw_mac(hw); |
| usb = &mac->chip.usb; |
| |
| del_timer_sync(&usb->tx.tx_retry_timer); |
| del_timer_sync(&usb->sta_queue_cleanup); |
| |
| ieee80211_unregister_hw(hw); |
| |
| plfxlc_chip_disable_rxtx(&mac->chip); |
| |
| /* If the disconnect has been caused by a removal of the |
| * driver module, the reset allows reloading of the driver. If the |
| * reset will not be executed here, the upload of the firmware in the |
| * probe function caused by the reloading of the driver will fail. |
| */ |
| usb_reset_device(interface_to_usbdev(intf)); |
| |
| plfxlc_mac_release(mac); |
| ieee80211_free_hw(hw); |
| } |
| |
| static void plfxlc_usb_resume(struct plfxlc_usb *usb) |
| { |
| struct plfxlc_mac *mac = plfxlc_usb_to_mac(usb); |
| int r; |
| |
| r = plfxlc_op_start(plfxlc_usb_to_hw(usb)); |
| if (r < 0) { |
| dev_warn(plfxlc_usb_dev(usb), |
| "Device resume failed (%d)\n", r); |
| |
| if (usb->was_running) |
| set_bit(PURELIFI_DEVICE_RUNNING, &mac->flags); |
| |
| usb_queue_reset_device(usb->intf); |
| return; |
| } |
| |
| if (mac->type != NL80211_IFTYPE_UNSPECIFIED) { |
| r = plfxlc_restore_settings(mac); |
| if (r < 0) { |
| dev_dbg(plfxlc_usb_dev(usb), |
| "Restore failed (%d)\n", r); |
| return; |
| } |
| } |
| } |
| |
| static void plfxlc_usb_stop(struct plfxlc_usb *usb) |
| { |
| plfxlc_op_stop(plfxlc_usb_to_hw(usb), false); |
| plfxlc_usb_disable_tx(usb); |
| plfxlc_usb_disable_rx(usb); |
| |
| usb->initialized = false; |
| } |
| |
| static int pre_reset(struct usb_interface *intf) |
| { |
| struct ieee80211_hw *hw = usb_get_intfdata(intf); |
| struct plfxlc_mac *mac; |
| struct plfxlc_usb *usb; |
| |
| if (!hw || intf->condition != USB_INTERFACE_BOUND) |
| return 0; |
| |
| mac = plfxlc_hw_mac(hw); |
| usb = &mac->chip.usb; |
| |
| usb->was_running = test_bit(PURELIFI_DEVICE_RUNNING, &mac->flags); |
| |
| plfxlc_usb_stop(usb); |
| |
| return 0; |
| } |
| |
| static int post_reset(struct usb_interface *intf) |
| { |
| struct ieee80211_hw *hw = usb_get_intfdata(intf); |
| struct plfxlc_mac *mac; |
| struct plfxlc_usb *usb; |
| |
| if (!hw || intf->condition != USB_INTERFACE_BOUND) |
| return 0; |
| |
| mac = plfxlc_hw_mac(hw); |
| usb = &mac->chip.usb; |
| |
| if (usb->was_running) |
| plfxlc_usb_resume(usb); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM |
| |
| static struct plfxlc_usb *get_plfxlc_usb(struct usb_interface *intf) |
| { |
| struct ieee80211_hw *hw = plfxlc_intf_to_hw(intf); |
| struct plfxlc_mac *mac; |
| |
| /* Either something really bad happened, or |
| * we're just dealing with a DEVICE_INSTALLER. |
| */ |
| if (!hw) |
| return NULL; |
| |
| mac = plfxlc_hw_mac(hw); |
| return &mac->chip.usb; |
| } |
| |
| static int suspend(struct usb_interface *interface, |
| pm_message_t message) |
| { |
| struct plfxlc_usb *pl = get_plfxlc_usb(interface); |
| struct plfxlc_mac *mac = plfxlc_usb_to_mac(pl); |
| |
| if (!pl) |
| return -ENODEV; |
| if (pl->initialized == 0) |
| return 0; |
| pl->was_running = test_bit(PURELIFI_DEVICE_RUNNING, &mac->flags); |
| plfxlc_usb_stop(pl); |
| return 0; |
| } |
| |
| static int resume(struct usb_interface *interface) |
| { |
| struct plfxlc_usb *pl = get_plfxlc_usb(interface); |
| |
| if (!pl) |
| return -ENODEV; |
| if (pl->was_running) |
| plfxlc_usb_resume(pl); |
| return 0; |
| } |
| |
| #endif |
| |
| static struct usb_driver driver = { |
| .name = KBUILD_MODNAME, |
| .id_table = usb_ids, |
| .probe = probe, |
| .disconnect = disconnect, |
| .pre_reset = pre_reset, |
| .post_reset = post_reset, |
| #ifdef CONFIG_PM |
| .suspend = suspend, |
| .resume = resume, |
| #endif |
| .disable_hub_initiated_lpm = 1, |
| }; |
| |
| static int __init usb_init(void) |
| { |
| int r; |
| |
| r = usb_register(&driver); |
| if (r) { |
| pr_err("%s usb_register() failed %d\n", driver.name, r); |
| return r; |
| } |
| |
| pr_debug("Driver initialized :%s\n", driver.name); |
| return 0; |
| } |
| |
| static void __exit usb_exit(void) |
| { |
| usb_deregister(&driver); |
| pr_debug("%s %s\n", driver.name, __func__); |
| } |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_DESCRIPTION("USB driver for pureLiFi devices"); |
| MODULE_AUTHOR("pureLiFi"); |
| MODULE_VERSION("1.0"); |
| MODULE_FIRMWARE("plfxlc/lifi-x.bin"); |
| MODULE_DEVICE_TABLE(usb, usb_ids); |
| |
| module_init(usb_init); |
| module_exit(usb_exit); |