| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * StarFive JH7110 USB 2.0 PHY driver |
| * |
| * Copyright (C) 2023 StarFive Technology Co., Ltd. |
| * Author: Minda Chen <minda.chen@starfivetech.com> |
| */ |
| |
| #include <linux/bits.h> |
| #include <linux/clk.h> |
| #include <linux/err.h> |
| #include <linux/io.h> |
| #include <linux/mfd/syscon.h> |
| #include <linux/module.h> |
| #include <linux/phy/phy.h> |
| #include <linux/platform_device.h> |
| #include <linux/regmap.h> |
| #include <linux/usb/of.h> |
| |
| #define USB_125M_CLK_RATE 125000000 |
| #define USB_LS_KEEPALIVE_OFF 0x4 |
| #define USB_LS_KEEPALIVE_ENABLE BIT(4) |
| |
| #define USB_PDRSTN_SPLIT BIT(17) |
| #define SYSCON_USB_SPLIT_OFFSET 0x18 |
| |
| struct jh7110_usb2_phy { |
| struct phy *phy; |
| void __iomem *regs; |
| struct regmap *sys_syscon; |
| struct clk *usb_125m_clk; |
| struct clk *app_125m; |
| enum phy_mode mode; |
| }; |
| |
| static void usb2_set_ls_keepalive(struct jh7110_usb2_phy *phy, bool set) |
| { |
| unsigned int val; |
| |
| /* Host mode enable the LS speed keep-alive signal */ |
| val = readl(phy->regs + USB_LS_KEEPALIVE_OFF); |
| if (set) |
| val |= USB_LS_KEEPALIVE_ENABLE; |
| else |
| val &= ~USB_LS_KEEPALIVE_ENABLE; |
| |
| writel(val, phy->regs + USB_LS_KEEPALIVE_OFF); |
| } |
| |
| static int usb2_phy_set_mode(struct phy *_phy, |
| enum phy_mode mode, int submode) |
| { |
| struct jh7110_usb2_phy *phy = phy_get_drvdata(_phy); |
| |
| switch (mode) { |
| case PHY_MODE_USB_HOST: |
| case PHY_MODE_USB_DEVICE: |
| case PHY_MODE_USB_OTG: |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| if (mode != phy->mode) { |
| dev_dbg(&_phy->dev, "Changing phy to %d\n", mode); |
| phy->mode = mode; |
| usb2_set_ls_keepalive(phy, (mode != PHY_MODE_USB_DEVICE)); |
| } |
| |
| /* Connect usb 2.0 phy mode */ |
| regmap_update_bits(phy->sys_syscon, SYSCON_USB_SPLIT_OFFSET, |
| USB_PDRSTN_SPLIT, USB_PDRSTN_SPLIT); |
| |
| return 0; |
| } |
| |
| static int jh7110_usb2_phy_init(struct phy *_phy) |
| { |
| struct jh7110_usb2_phy *phy = phy_get_drvdata(_phy); |
| int ret; |
| |
| ret = clk_set_rate(phy->usb_125m_clk, USB_125M_CLK_RATE); |
| if (ret) |
| return ret; |
| |
| ret = clk_prepare_enable(phy->app_125m); |
| if (ret) |
| return ret; |
| |
| return 0; |
| } |
| |
| static int jh7110_usb2_phy_exit(struct phy *_phy) |
| { |
| struct jh7110_usb2_phy *phy = phy_get_drvdata(_phy); |
| |
| clk_disable_unprepare(phy->app_125m); |
| |
| return 0; |
| } |
| |
| static const struct phy_ops jh7110_usb2_phy_ops = { |
| .init = jh7110_usb2_phy_init, |
| .exit = jh7110_usb2_phy_exit, |
| .set_mode = usb2_phy_set_mode, |
| .owner = THIS_MODULE, |
| }; |
| |
| static int jh7110_usb_phy_probe(struct platform_device *pdev) |
| { |
| struct jh7110_usb2_phy *phy; |
| struct device *dev = &pdev->dev; |
| struct phy_provider *phy_provider; |
| |
| phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL); |
| if (!phy) |
| return -ENOMEM; |
| |
| phy->usb_125m_clk = devm_clk_get(dev, "125m"); |
| if (IS_ERR(phy->usb_125m_clk)) |
| return dev_err_probe(dev, PTR_ERR(phy->usb_125m_clk), |
| "Failed to get 125m clock\n"); |
| |
| phy->app_125m = devm_clk_get(dev, "app_125m"); |
| if (IS_ERR(phy->app_125m)) |
| return dev_err_probe(dev, PTR_ERR(phy->app_125m), |
| "Failed to get app 125m clock\n"); |
| |
| phy->regs = devm_platform_ioremap_resource(pdev, 0); |
| if (IS_ERR(phy->regs)) |
| return dev_err_probe(dev, PTR_ERR(phy->regs), |
| "Failed to map phy base\n"); |
| |
| phy->phy = devm_phy_create(dev, NULL, &jh7110_usb2_phy_ops); |
| if (IS_ERR(phy->phy)) |
| return dev_err_probe(dev, PTR_ERR(phy->phy), |
| "Failed to create phy\n"); |
| |
| phy_set_drvdata(phy->phy, phy); |
| phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); |
| |
| phy->sys_syscon = |
| syscon_regmap_lookup_by_compatible("starfive,jh7110-sys-syscon"); |
| if (IS_ERR(phy->sys_syscon)) |
| return dev_err_probe(dev, PTR_ERR(phy->sys_syscon), |
| "Failed to get sys-syscon\n"); |
| |
| return PTR_ERR_OR_ZERO(phy_provider); |
| } |
| |
| static const struct of_device_id jh7110_usb_phy_of_match[] = { |
| { .compatible = "starfive,jh7110-usb-phy" }, |
| { /* sentinel */ }, |
| }; |
| MODULE_DEVICE_TABLE(of, jh7110_usb_phy_of_match); |
| |
| static struct platform_driver jh7110_usb_phy_driver = { |
| .probe = jh7110_usb_phy_probe, |
| .driver = { |
| .of_match_table = jh7110_usb_phy_of_match, |
| .name = "jh7110-usb-phy", |
| } |
| }; |
| module_platform_driver(jh7110_usb_phy_driver); |
| |
| MODULE_DESCRIPTION("StarFive JH7110 USB 2.0 PHY driver"); |
| MODULE_AUTHOR("Minda Chen <minda.chen@starfivetech.com>"); |
| MODULE_LICENSE("GPL"); |