| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Asus PC WMI hotkey driver |
| * |
| * Copyright(C) 2010 Intel Corporation. |
| * Copyright(C) 2010-2011 Corentin Chary <corentin.chary@gmail.com> |
| * |
| * Portions based on wistron_btns.c: |
| * Copyright (C) 2005 Miloslav Trmac <mitr@volny.cz> |
| * Copyright (C) 2005 Bernhard Rosenkraenzer <bero@arklinux.org> |
| * Copyright (C) 2005 Dmitry Torokhov <dtor@mail.ru> |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/acpi.h> |
| #include <linux/backlight.h> |
| #include <linux/debugfs.h> |
| #include <linux/delay.h> |
| #include <linux/dmi.h> |
| #include <linux/hwmon.h> |
| #include <linux/hwmon-sysfs.h> |
| #include <linux/init.h> |
| #include <linux/input.h> |
| #include <linux/input/sparse-keymap.h> |
| #include <linux/kernel.h> |
| #include <linux/leds.h> |
| #include <linux/minmax.h> |
| #include <linux/module.h> |
| #include <linux/pci.h> |
| #include <linux/pci_hotplug.h> |
| #include <linux/platform_data/x86/asus-wmi.h> |
| #include <linux/platform_device.h> |
| #include <linux/platform_profile.h> |
| #include <linux/power_supply.h> |
| #include <linux/rfkill.h> |
| #include <linux/seq_file.h> |
| #include <linux/slab.h> |
| #include <linux/types.h> |
| #include <linux/units.h> |
| |
| #include <acpi/battery.h> |
| #include <acpi/video.h> |
| |
| #include "asus-wmi.h" |
| |
| MODULE_AUTHOR("Corentin Chary <corentin.chary@gmail.com>"); |
| MODULE_AUTHOR("Yong Wang <yong.y.wang@intel.com>"); |
| MODULE_DESCRIPTION("Asus Generic WMI Driver"); |
| MODULE_LICENSE("GPL"); |
| |
| static bool fnlock_default = true; |
| module_param(fnlock_default, bool, 0444); |
| |
| #define to_asus_wmi_driver(pdrv) \ |
| (container_of((pdrv), struct asus_wmi_driver, platform_driver)) |
| |
| #define ASUS_WMI_MGMT_GUID "97845ED0-4E6D-11DE-8A39-0800200C9A66" |
| |
| #define NOTIFY_BRNUP_MIN 0x11 |
| #define NOTIFY_BRNUP_MAX 0x1f |
| #define NOTIFY_BRNDOWN_MIN 0x20 |
| #define NOTIFY_BRNDOWN_MAX 0x2e |
| #define NOTIFY_FNLOCK_TOGGLE 0x4e |
| #define NOTIFY_KBD_DOCK_CHANGE 0x75 |
| #define NOTIFY_KBD_BRTUP 0xc4 |
| #define NOTIFY_KBD_BRTDWN 0xc5 |
| #define NOTIFY_KBD_BRTTOGGLE 0xc7 |
| #define NOTIFY_KBD_FBM 0x99 |
| #define NOTIFY_KBD_TTP 0xae |
| #define NOTIFY_LID_FLIP 0xfa |
| #define NOTIFY_LID_FLIP_ROG 0xbd |
| |
| #define ASUS_WMI_FNLOCK_BIOS_DISABLED BIT(0) |
| |
| #define ASUS_MID_FAN_DESC "mid_fan" |
| #define ASUS_GPU_FAN_DESC "gpu_fan" |
| #define ASUS_FAN_DESC "cpu_fan" |
| #define ASUS_FAN_MFUN 0x13 |
| #define ASUS_FAN_SFUN_READ 0x06 |
| #define ASUS_FAN_SFUN_WRITE 0x07 |
| |
| /* Based on standard hwmon pwmX_enable values */ |
| #define ASUS_FAN_CTRL_FULLSPEED 0 |
| #define ASUS_FAN_CTRL_MANUAL 1 |
| #define ASUS_FAN_CTRL_AUTO 2 |
| |
| #define ASUS_FAN_BOOST_MODE_NORMAL 0 |
| #define ASUS_FAN_BOOST_MODE_OVERBOOST 1 |
| #define ASUS_FAN_BOOST_MODE_OVERBOOST_MASK 0x01 |
| #define ASUS_FAN_BOOST_MODE_SILENT 2 |
| #define ASUS_FAN_BOOST_MODE_SILENT_MASK 0x02 |
| #define ASUS_FAN_BOOST_MODES_MASK 0x03 |
| |
| #define ASUS_THROTTLE_THERMAL_POLICY_DEFAULT 0 |
| #define ASUS_THROTTLE_THERMAL_POLICY_OVERBOOST 1 |
| #define ASUS_THROTTLE_THERMAL_POLICY_SILENT 2 |
| |
| #define ASUS_THROTTLE_THERMAL_POLICY_DEFAULT_VIVO 0 |
| #define ASUS_THROTTLE_THERMAL_POLICY_SILENT_VIVO 1 |
| #define ASUS_THROTTLE_THERMAL_POLICY_OVERBOOST_VIVO 2 |
| |
| #define PLATFORM_PROFILE_MAX 2 |
| |
| #define USB_INTEL_XUSB2PR 0xD0 |
| #define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI 0x9c31 |
| |
| #define ASUS_ACPI_UID_ASUSWMI "ASUSWMI" |
| |
| #define WMI_EVENT_MASK 0xFFFF |
| |
| #define FAN_CURVE_POINTS 8 |
| #define FAN_CURVE_BUF_LEN 32 |
| #define FAN_CURVE_DEV_CPU 0x00 |
| #define FAN_CURVE_DEV_GPU 0x01 |
| #define FAN_CURVE_DEV_MID 0x02 |
| /* Mask to determine if setting temperature or percentage */ |
| #define FAN_CURVE_PWM_MASK 0x04 |
| |
| /* Limits for tunables available on ASUS ROG laptops */ |
| #define PPT_TOTAL_MIN 5 |
| #define PPT_TOTAL_MAX 250 |
| #define PPT_CPU_MIN 5 |
| #define PPT_CPU_MAX 130 |
| #define NVIDIA_BOOST_MIN 5 |
| #define NVIDIA_BOOST_MAX 25 |
| #define NVIDIA_TEMP_MIN 75 |
| #define NVIDIA_TEMP_MAX 87 |
| |
| #define ASUS_SCREENPAD_BRIGHT_MIN 20 |
| #define ASUS_SCREENPAD_BRIGHT_MAX 255 |
| #define ASUS_SCREENPAD_BRIGHT_DEFAULT 60 |
| |
| #define ASUS_MINI_LED_MODE_MASK 0x03 |
| /* Standard modes for devices with only on/off */ |
| #define ASUS_MINI_LED_OFF 0x00 |
| #define ASUS_MINI_LED_ON 0x01 |
| /* New mode on some devices, define here to clarify remapping later */ |
| #define ASUS_MINI_LED_STRONG_MODE 0x02 |
| /* New modes for devices with 3 mini-led mode types */ |
| #define ASUS_MINI_LED_2024_WEAK 0x00 |
| #define ASUS_MINI_LED_2024_STRONG 0x01 |
| #define ASUS_MINI_LED_2024_OFF 0x02 |
| |
| /* Controls the power state of the USB0 hub on ROG Ally which input is on */ |
| #define ASUS_USB0_PWR_EC0_CSEE "\\_SB.PCI0.SBRG.EC0.CSEE" |
| /* 300ms so far seems to produce a reliable result on AC and battery */ |
| #define ASUS_USB0_PWR_EC0_CSEE_WAIT 1500 |
| |
| static const char * const ashs_ids[] = { "ATK4001", "ATK4002", NULL }; |
| |
| static int throttle_thermal_policy_write(struct asus_wmi *); |
| |
| static const struct dmi_system_id asus_ally_mcu_quirk[] = { |
| { |
| .matches = { |
| DMI_MATCH(DMI_BOARD_NAME, "RC71L"), |
| }, |
| }, |
| { |
| .matches = { |
| DMI_MATCH(DMI_BOARD_NAME, "RC72L"), |
| }, |
| }, |
| { }, |
| }; |
| |
| static bool ashs_present(void) |
| { |
| int i = 0; |
| while (ashs_ids[i]) { |
| if (acpi_dev_found(ashs_ids[i++])) |
| return true; |
| } |
| return false; |
| } |
| |
| struct bios_args { |
| u32 arg0; |
| u32 arg1; |
| u32 arg2; /* At least TUF Gaming series uses 3 dword input buffer. */ |
| u32 arg3; |
| u32 arg4; /* Some ROG laptops require a full 5 input args */ |
| u32 arg5; |
| } __packed; |
| |
| /* |
| * Struct that's used for all methods called via AGFN. Naming is |
| * identically to the AML code. |
| */ |
| struct agfn_args { |
| u16 mfun; /* probably "Multi-function" to be called */ |
| u16 sfun; /* probably "Sub-function" to be called */ |
| u16 len; /* size of the hole struct, including subfunction fields */ |
| u8 stas; /* not used by now */ |
| u8 err; /* zero on success */ |
| } __packed; |
| |
| /* struct used for calling fan read and write methods */ |
| struct agfn_fan_args { |
| struct agfn_args agfn; /* common fields */ |
| u8 fan; /* fan number: 0: set auto mode 1: 1st fan */ |
| u32 speed; /* read: RPM/100 - write: 0-255 */ |
| } __packed; |
| |
| /* |
| * <platform>/ - debugfs root directory |
| * dev_id - current dev_id |
| * ctrl_param - current ctrl_param |
| * method_id - current method_id |
| * devs - call DEVS(dev_id, ctrl_param) and print result |
| * dsts - call DSTS(dev_id) and print result |
| * call - call method_id(dev_id, ctrl_param) and print result |
| */ |
| struct asus_wmi_debug { |
| struct dentry *root; |
| u32 method_id; |
| u32 dev_id; |
| u32 ctrl_param; |
| }; |
| |
| struct asus_rfkill { |
| struct asus_wmi *asus; |
| struct rfkill *rfkill; |
| u32 dev_id; |
| }; |
| |
| enum fan_type { |
| FAN_TYPE_NONE = 0, |
| FAN_TYPE_AGFN, /* deprecated on newer platforms */ |
| FAN_TYPE_SPEC83, /* starting in Spec 8.3, use CPU_FAN_CTRL */ |
| }; |
| |
| struct fan_curve_data { |
| bool enabled; |
| u32 device_id; |
| u8 temps[FAN_CURVE_POINTS]; |
| u8 percents[FAN_CURVE_POINTS]; |
| }; |
| |
| struct asus_wmi { |
| int dsts_id; |
| int spec; |
| int sfun; |
| |
| struct input_dev *inputdev; |
| struct backlight_device *backlight_device; |
| struct backlight_device *screenpad_backlight_device; |
| struct platform_device *platform_device; |
| |
| struct led_classdev wlan_led; |
| int wlan_led_wk; |
| struct led_classdev tpd_led; |
| int tpd_led_wk; |
| struct led_classdev kbd_led; |
| int kbd_led_wk; |
| struct led_classdev lightbar_led; |
| int lightbar_led_wk; |
| struct led_classdev micmute_led; |
| struct led_classdev camera_led; |
| struct workqueue_struct *led_workqueue; |
| struct work_struct tpd_led_work; |
| struct work_struct wlan_led_work; |
| struct work_struct lightbar_led_work; |
| |
| struct asus_rfkill wlan; |
| struct asus_rfkill bluetooth; |
| struct asus_rfkill wimax; |
| struct asus_rfkill wwan3g; |
| struct asus_rfkill gps; |
| struct asus_rfkill uwb; |
| |
| int tablet_switch_event_code; |
| u32 tablet_switch_dev_id; |
| bool tablet_switch_inverted; |
| |
| /* The ROG Ally device requires the MCU USB device be disconnected before suspend */ |
| bool ally_mcu_usb_switch; |
| |
| enum fan_type fan_type; |
| enum fan_type gpu_fan_type; |
| enum fan_type mid_fan_type; |
| int fan_pwm_mode; |
| int gpu_fan_pwm_mode; |
| int mid_fan_pwm_mode; |
| int agfn_pwm; |
| |
| bool fan_boost_mode_available; |
| u8 fan_boost_mode_mask; |
| u8 fan_boost_mode; |
| |
| bool egpu_enable_available; |
| bool dgpu_disable_available; |
| u32 gpu_mux_dev; |
| |
| /* Tunables provided by ASUS for gaming laptops */ |
| u32 ppt_pl2_sppt; |
| u32 ppt_pl1_spl; |
| u32 ppt_apu_sppt; |
| u32 ppt_platform_sppt; |
| u32 ppt_fppt; |
| u32 nv_dynamic_boost; |
| u32 nv_temp_target; |
| |
| u32 kbd_rgb_dev; |
| bool kbd_rgb_state_available; |
| |
| u8 throttle_thermal_policy_mode; |
| u32 throttle_thermal_policy_dev; |
| |
| bool cpu_fan_curve_available; |
| bool gpu_fan_curve_available; |
| bool mid_fan_curve_available; |
| struct fan_curve_data custom_fan_curves[3]; |
| |
| struct platform_profile_handler platform_profile_handler; |
| bool platform_profile_support; |
| |
| // The RSOC controls the maximum charging percentage. |
| bool battery_rsoc_available; |
| |
| bool panel_overdrive_available; |
| u32 mini_led_dev_id; |
| |
| struct hotplug_slot hotplug_slot; |
| struct mutex hotplug_lock; |
| struct mutex wmi_lock; |
| struct workqueue_struct *hotplug_workqueue; |
| struct work_struct hotplug_work; |
| |
| bool fnlock_locked; |
| |
| struct asus_wmi_debug debug; |
| |
| struct asus_wmi_driver *driver; |
| }; |
| |
| /* WMI ************************************************************************/ |
| |
| static int asus_wmi_evaluate_method3(u32 method_id, |
| u32 arg0, u32 arg1, u32 arg2, u32 *retval) |
| { |
| struct bios_args args = { |
| .arg0 = arg0, |
| .arg1 = arg1, |
| .arg2 = arg2, |
| }; |
| struct acpi_buffer input = { (acpi_size) sizeof(args), &args }; |
| struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL }; |
| acpi_status status; |
| union acpi_object *obj; |
| u32 tmp = 0; |
| |
| status = wmi_evaluate_method(ASUS_WMI_MGMT_GUID, 0, method_id, |
| &input, &output); |
| |
| pr_debug("%s called (0x%08x) with args: 0x%08x, 0x%08x, 0x%08x\n", |
| __func__, method_id, arg0, arg1, arg2); |
| if (ACPI_FAILURE(status)) { |
| pr_debug("%s, (0x%08x), arg 0x%08x failed: %d\n", |
| __func__, method_id, arg0, -EIO); |
| return -EIO; |
| } |
| |
| obj = (union acpi_object *)output.pointer; |
| if (obj && obj->type == ACPI_TYPE_INTEGER) |
| tmp = (u32) obj->integer.value; |
| |
| pr_debug("Result: 0x%08x\n", tmp); |
| if (retval) |
| *retval = tmp; |
| |
| kfree(obj); |
| |
| if (tmp == ASUS_WMI_UNSUPPORTED_METHOD) { |
| pr_debug("%s, (0x%08x), arg 0x%08x failed: %d\n", |
| __func__, method_id, arg0, -ENODEV); |
| return -ENODEV; |
| } |
| |
| return 0; |
| } |
| |
| int asus_wmi_evaluate_method(u32 method_id, u32 arg0, u32 arg1, u32 *retval) |
| { |
| return asus_wmi_evaluate_method3(method_id, arg0, arg1, 0, retval); |
| } |
| EXPORT_SYMBOL_GPL(asus_wmi_evaluate_method); |
| |
| static int asus_wmi_evaluate_method5(u32 method_id, |
| u32 arg0, u32 arg1, u32 arg2, u32 arg3, u32 arg4, u32 *retval) |
| { |
| struct bios_args args = { |
| .arg0 = arg0, |
| .arg1 = arg1, |
| .arg2 = arg2, |
| .arg3 = arg3, |
| .arg4 = arg4, |
| }; |
| struct acpi_buffer input = { (acpi_size) sizeof(args), &args }; |
| struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL }; |
| acpi_status status; |
| union acpi_object *obj; |
| u32 tmp = 0; |
| |
| status = wmi_evaluate_method(ASUS_WMI_MGMT_GUID, 0, method_id, |
| &input, &output); |
| |
| pr_debug("%s called (0x%08x) with args: 0x%08x, 0x%08x, 0x%08x, 0x%08x, 0x%08x\n", |
| __func__, method_id, arg0, arg1, arg2, arg3, arg4); |
| if (ACPI_FAILURE(status)) { |
| pr_debug("%s, (0x%08x), arg 0x%08x failed: %d\n", |
| __func__, method_id, arg0, -EIO); |
| return -EIO; |
| } |
| |
| obj = (union acpi_object *)output.pointer; |
| if (obj && obj->type == ACPI_TYPE_INTEGER) |
| tmp = (u32) obj->integer.value; |
| |
| pr_debug("Result: %x\n", tmp); |
| if (retval) |
| *retval = tmp; |
| |
| kfree(obj); |
| |
| if (tmp == ASUS_WMI_UNSUPPORTED_METHOD) { |
| pr_debug("%s, (0x%08x), arg 0x%08x failed: %d\n", |
| __func__, method_id, arg0, -ENODEV); |
| return -ENODEV; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Returns as an error if the method output is not a buffer. Typically this |
| * means that the method called is unsupported. |
| */ |
| static int asus_wmi_evaluate_method_buf(u32 method_id, |
| u32 arg0, u32 arg1, u8 *ret_buffer, size_t size) |
| { |
| struct bios_args args = { |
| .arg0 = arg0, |
| .arg1 = arg1, |
| .arg2 = 0, |
| }; |
| struct acpi_buffer input = { (acpi_size) sizeof(args), &args }; |
| struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL }; |
| acpi_status status; |
| union acpi_object *obj; |
| int err = 0; |
| |
| status = wmi_evaluate_method(ASUS_WMI_MGMT_GUID, 0, method_id, |
| &input, &output); |
| |
| pr_debug("%s called (0x%08x) with args: 0x%08x, 0x%08x\n", |
| __func__, method_id, arg0, arg1); |
| if (ACPI_FAILURE(status)) { |
| pr_debug("%s, (0x%08x), arg 0x%08x failed: %d\n", |
| __func__, method_id, arg0, -EIO); |
| return -EIO; |
| } |
| |
| obj = (union acpi_object *)output.pointer; |
| |
| switch (obj->type) { |
| case ACPI_TYPE_BUFFER: |
| if (obj->buffer.length > size) { |
| err = -ENOSPC; |
| break; |
| } |
| if (obj->buffer.length == 0) { |
| err = -ENODATA; |
| break; |
| } |
| |
| memcpy(ret_buffer, obj->buffer.pointer, obj->buffer.length); |
| break; |
| case ACPI_TYPE_INTEGER: |
| err = (u32)obj->integer.value; |
| |
| if (err == ASUS_WMI_UNSUPPORTED_METHOD) |
| err = -ENODEV; |
| /* |
| * At least one method returns a 0 with no buffer if no arg |
| * is provided, such as ASUS_WMI_DEVID_CPU_FAN_CURVE |
| */ |
| if (err == 0) |
| err = -ENODATA; |
| break; |
| default: |
| err = -ENODATA; |
| break; |
| } |
| |
| kfree(obj); |
| |
| if (err) { |
| pr_debug("%s, (0x%08x), arg 0x%08x failed: %d\n", |
| __func__, method_id, arg0, err); |
| return err; |
| } |
| |
| return 0; |
| } |
| |
| static int asus_wmi_evaluate_method_agfn(const struct acpi_buffer args) |
| { |
| struct acpi_buffer input; |
| u64 phys_addr; |
| u32 retval; |
| u32 status; |
| |
| /* |
| * Copy to dma capable address otherwise memory corruption occurs as |
| * bios has to be able to access it. |
| */ |
| input.pointer = kmemdup(args.pointer, args.length, GFP_DMA | GFP_KERNEL); |
| input.length = args.length; |
| if (!input.pointer) |
| return -ENOMEM; |
| phys_addr = virt_to_phys(input.pointer); |
| |
| status = asus_wmi_evaluate_method(ASUS_WMI_METHODID_AGFN, |
| phys_addr, 0, &retval); |
| if (!status) |
| memcpy(args.pointer, input.pointer, args.length); |
| |
| kfree(input.pointer); |
| if (status) |
| return -ENXIO; |
| |
| return retval; |
| } |
| |
| static int asus_wmi_get_devstate(struct asus_wmi *asus, u32 dev_id, u32 *retval) |
| { |
| int err; |
| |
| err = asus_wmi_evaluate_method(asus->dsts_id, dev_id, 0, retval); |
| |
| if (err) |
| return err; |
| |
| if (*retval == ~0) |
| return -ENODEV; |
| |
| return 0; |
| } |
| |
| static int asus_wmi_set_devstate(u32 dev_id, u32 ctrl_param, |
| u32 *retval) |
| { |
| return asus_wmi_evaluate_method(ASUS_WMI_METHODID_DEVS, dev_id, |
| ctrl_param, retval); |
| } |
| |
| /* Helper for special devices with magic return codes */ |
| static int asus_wmi_get_devstate_bits(struct asus_wmi *asus, |
| u32 dev_id, u32 mask) |
| { |
| u32 retval = 0; |
| int err; |
| |
| err = asus_wmi_get_devstate(asus, dev_id, &retval); |
| if (err < 0) |
| return err; |
| |
| if (!(retval & ASUS_WMI_DSTS_PRESENCE_BIT)) |
| return -ENODEV; |
| |
| if (mask == ASUS_WMI_DSTS_STATUS_BIT) { |
| if (retval & ASUS_WMI_DSTS_UNKNOWN_BIT) |
| return -ENODEV; |
| } |
| |
| return retval & mask; |
| } |
| |
| static int asus_wmi_get_devstate_simple(struct asus_wmi *asus, u32 dev_id) |
| { |
| return asus_wmi_get_devstate_bits(asus, dev_id, |
| ASUS_WMI_DSTS_STATUS_BIT); |
| } |
| |
| static bool asus_wmi_dev_is_present(struct asus_wmi *asus, u32 dev_id) |
| { |
| u32 retval; |
| int status = asus_wmi_get_devstate(asus, dev_id, &retval); |
| pr_debug("%s called (0x%08x), retval: 0x%08x\n", __func__, dev_id, retval); |
| |
| return status == 0 && (retval & ASUS_WMI_DSTS_PRESENCE_BIT); |
| } |
| |
| /* Input **********************************************************************/ |
| static void asus_wmi_tablet_sw_report(struct asus_wmi *asus, bool value) |
| { |
| input_report_switch(asus->inputdev, SW_TABLET_MODE, |
| asus->tablet_switch_inverted ? !value : value); |
| input_sync(asus->inputdev); |
| } |
| |
| static void asus_wmi_tablet_sw_init(struct asus_wmi *asus, u32 dev_id, int event_code) |
| { |
| struct device *dev = &asus->platform_device->dev; |
| int result; |
| |
| result = asus_wmi_get_devstate_simple(asus, dev_id); |
| if (result >= 0) { |
| input_set_capability(asus->inputdev, EV_SW, SW_TABLET_MODE); |
| asus_wmi_tablet_sw_report(asus, result); |
| asus->tablet_switch_dev_id = dev_id; |
| asus->tablet_switch_event_code = event_code; |
| } else if (result == -ENODEV) { |
| dev_err(dev, "This device has tablet-mode-switch quirk but got ENODEV checking it. This is a bug."); |
| } else { |
| dev_err(dev, "Error checking for tablet-mode-switch: %d\n", result); |
| } |
| } |
| |
| static int asus_wmi_input_init(struct asus_wmi *asus) |
| { |
| struct device *dev = &asus->platform_device->dev; |
| int err; |
| |
| asus->inputdev = input_allocate_device(); |
| if (!asus->inputdev) |
| return -ENOMEM; |
| |
| asus->inputdev->name = asus->driver->input_name; |
| asus->inputdev->phys = asus->driver->input_phys; |
| asus->inputdev->id.bustype = BUS_HOST; |
| asus->inputdev->dev.parent = dev; |
| set_bit(EV_REP, asus->inputdev->evbit); |
| |
| err = sparse_keymap_setup(asus->inputdev, asus->driver->keymap, NULL); |
| if (err) |
| goto err_free_dev; |
| |
| switch (asus->driver->quirks->tablet_switch_mode) { |
| case asus_wmi_no_tablet_switch: |
| break; |
| case asus_wmi_kbd_dock_devid: |
| asus->tablet_switch_inverted = true; |
| asus_wmi_tablet_sw_init(asus, ASUS_WMI_DEVID_KBD_DOCK, NOTIFY_KBD_DOCK_CHANGE); |
| break; |
| case asus_wmi_lid_flip_devid: |
| asus_wmi_tablet_sw_init(asus, ASUS_WMI_DEVID_LID_FLIP, NOTIFY_LID_FLIP); |
| break; |
| case asus_wmi_lid_flip_rog_devid: |
| asus_wmi_tablet_sw_init(asus, ASUS_WMI_DEVID_LID_FLIP_ROG, NOTIFY_LID_FLIP_ROG); |
| break; |
| } |
| |
| err = input_register_device(asus->inputdev); |
| if (err) |
| goto err_free_dev; |
| |
| return 0; |
| |
| err_free_dev: |
| input_free_device(asus->inputdev); |
| return err; |
| } |
| |
| static void asus_wmi_input_exit(struct asus_wmi *asus) |
| { |
| if (asus->inputdev) |
| input_unregister_device(asus->inputdev); |
| |
| asus->inputdev = NULL; |
| } |
| |
| /* Tablet mode ****************************************************************/ |
| |
| static void asus_wmi_tablet_mode_get_state(struct asus_wmi *asus) |
| { |
| int result; |
| |
| if (!asus->tablet_switch_dev_id) |
| return; |
| |
| result = asus_wmi_get_devstate_simple(asus, asus->tablet_switch_dev_id); |
| if (result >= 0) |
| asus_wmi_tablet_sw_report(asus, result); |
| } |
| |
| /* Charging mode, 1=Barrel, 2=USB ******************************************/ |
| static ssize_t charge_mode_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct asus_wmi *asus = dev_get_drvdata(dev); |
| int result, value; |
| |
| result = asus_wmi_get_devstate(asus, ASUS_WMI_DEVID_CHARGE_MODE, &value); |
| if (result < 0) |
| return result; |
| |
| return sysfs_emit(buf, "%d\n", value & 0xff); |
| } |
| |
| static DEVICE_ATTR_RO(charge_mode); |
| |
| /* dGPU ********************************************************************/ |
| static ssize_t dgpu_disable_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct asus_wmi *asus = dev_get_drvdata(dev); |
| int result; |
| |
| result = asus_wmi_get_devstate_simple(asus, ASUS_WMI_DEVID_DGPU); |
| if (result < 0) |
| return result; |
| |
| return sysfs_emit(buf, "%d\n", result); |
| } |
| |
| /* |
| * A user may be required to store the value twice, typcial store first, then |
| * rescan PCI bus to activate power, then store a second time to save correctly. |
| * The reason for this is that an extra code path in the ACPI is enabled when |
| * the device and bus are powered. |
| */ |
| static ssize_t dgpu_disable_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| int result, err; |
| u32 disable; |
| |
| struct asus_wmi *asus = dev_get_drvdata(dev); |
| |
| result = kstrtou32(buf, 10, &disable); |
| if (result) |
| return result; |
| |
| if (disable > 1) |
| return -EINVAL; |
| |
| if (asus->gpu_mux_dev) { |
| result = asus_wmi_get_devstate_simple(asus, asus->gpu_mux_dev); |
| if (result < 0) |
| /* An error here may signal greater failure of GPU handling */ |
| return result; |
| if (!result && disable) { |
| err = -ENODEV; |
| pr_warn("Can not disable dGPU when the MUX is in dGPU mode: %d\n", err); |
| return err; |
| } |
| } |
| |
| err = asus_wmi_set_devstate(ASUS_WMI_DEVID_DGPU, disable, &result); |
| if (err) { |
| pr_warn("Failed to set dgpu disable: %d\n", err); |
| return err; |
| } |
| |
| if (result > 1) { |
| pr_warn("Failed to set dgpu disable (result): 0x%x\n", result); |
| return -EIO; |
| } |
| |
| sysfs_notify(&asus->platform_device->dev.kobj, NULL, "dgpu_disable"); |
| |
| return count; |
| } |
| static DEVICE_ATTR_RW(dgpu_disable); |
| |
| /* eGPU ********************************************************************/ |
| static ssize_t egpu_enable_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct asus_wmi *asus = dev_get_drvdata(dev); |
| int result; |
| |
| result = asus_wmi_get_devstate_simple(asus, ASUS_WMI_DEVID_EGPU); |
| if (result < 0) |
| return result; |
| |
| return sysfs_emit(buf, "%d\n", result); |
| } |
| |
| /* The ACPI call to enable the eGPU also disables the internal dGPU */ |
| static ssize_t egpu_enable_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| int result, err; |
| u32 enable; |
| |
| struct asus_wmi *asus = dev_get_drvdata(dev); |
| |
| err = kstrtou32(buf, 10, &enable); |
| if (err) |
| return err; |
| |
| if (enable > 1) |
| return -EINVAL; |
| |
| err = asus_wmi_get_devstate_simple(asus, ASUS_WMI_DEVID_EGPU_CONNECTED); |
| if (err < 0) { |
| pr_warn("Failed to get egpu connection status: %d\n", err); |
| return err; |
| } |
| |
| if (asus->gpu_mux_dev) { |
| result = asus_wmi_get_devstate_simple(asus, asus->gpu_mux_dev); |
| if (result < 0) { |
| /* An error here may signal greater failure of GPU handling */ |
| pr_warn("Failed to get gpu mux status: %d\n", result); |
| return result; |
| } |
| if (!result && enable) { |
| err = -ENODEV; |
| pr_warn("Can not enable eGPU when the MUX is in dGPU mode: %d\n", err); |
| return err; |
| } |
| } |
| |
| err = asus_wmi_set_devstate(ASUS_WMI_DEVID_EGPU, enable, &result); |
| if (err) { |
| pr_warn("Failed to set egpu state: %d\n", err); |
| return err; |
| } |
| |
| if (result > 1) { |
| pr_warn("Failed to set egpu state (retval): 0x%x\n", result); |
| return -EIO; |
| } |
| |
| sysfs_notify(&asus->platform_device->dev.kobj, NULL, "egpu_enable"); |
| |
| return count; |
| } |
| static DEVICE_ATTR_RW(egpu_enable); |
| |
| /* Is eGPU connected? *********************************************************/ |
| static ssize_t egpu_connected_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct asus_wmi *asus = dev_get_drvdata(dev); |
| int result; |
| |
| result = asus_wmi_get_devstate_simple(asus, ASUS_WMI_DEVID_EGPU_CONNECTED); |
| if (result < 0) |
| return result; |
| |
| return sysfs_emit(buf, "%d\n", result); |
| } |
| |
| static DEVICE_ATTR_RO(egpu_connected); |
| |
| /* gpu mux switch *************************************************************/ |
| static ssize_t gpu_mux_mode_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct asus_wmi *asus = dev_get_drvdata(dev); |
| int result; |
| |
| result = asus_wmi_get_devstate_simple(asus, asus->gpu_mux_dev); |
| if (result < 0) |
| return result; |
| |
| return sysfs_emit(buf, "%d\n", result); |
| } |
| |
| static ssize_t gpu_mux_mode_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct asus_wmi *asus = dev_get_drvdata(dev); |
| int result, err; |
| u32 optimus; |
| |
| err = kstrtou32(buf, 10, &optimus); |
| if (err) |
| return err; |
| |
| if (optimus > 1) |
| return -EINVAL; |
| |
| if (asus->dgpu_disable_available) { |
| result = asus_wmi_get_devstate_simple(asus, ASUS_WMI_DEVID_DGPU); |
| if (result < 0) |
| /* An error here may signal greater failure of GPU handling */ |
| return result; |
| if (result && !optimus) { |
| err = -ENODEV; |
| pr_warn("Can not switch MUX to dGPU mode when dGPU is disabled: %d\n", err); |
| return err; |
| } |
| } |
| |
| if (asus->egpu_enable_available) { |
| result = asus_wmi_get_devstate_simple(asus, ASUS_WMI_DEVID_EGPU); |
| if (result < 0) |
| /* An error here may signal greater failure of GPU handling */ |
| return result; |
| if (result && !optimus) { |
| err = -ENODEV; |
| pr_warn("Can not switch MUX to dGPU mode when eGPU is enabled: %d\n", err); |
| return err; |
| } |
| } |
| |
| err = asus_wmi_set_devstate(asus->gpu_mux_dev, optimus, &result); |
| if (err) { |
| dev_err(dev, "Failed to set GPU MUX mode: %d\n", err); |
| return err; |
| } |
| /* !1 is considered a fail by ASUS */ |
| if (result != 1) { |
| dev_warn(dev, "Failed to set GPU MUX mode (result): 0x%x\n", result); |
| return -EIO; |
| } |
| |
| sysfs_notify(&asus->platform_device->dev.kobj, NULL, "gpu_mux_mode"); |
| |
| return count; |
| } |
| static DEVICE_ATTR_RW(gpu_mux_mode); |
| |
| /* TUF Laptop Keyboard RGB Modes **********************************************/ |
| static ssize_t kbd_rgb_mode_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| u32 cmd, mode, r, g, b, speed; |
| struct led_classdev *led; |
| struct asus_wmi *asus; |
| int err; |
| |
| led = dev_get_drvdata(dev); |
| asus = container_of(led, struct asus_wmi, kbd_led); |
| |
| if (sscanf(buf, "%d %d %d %d %d %d", &cmd, &mode, &r, &g, &b, &speed) != 6) |
| return -EINVAL; |
| |
| /* B3 is set and B4 is save to BIOS */ |
| switch (cmd) { |
| case 0: |
| cmd = 0xb3; |
| break; |
| case 1: |
| cmd = 0xb4; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| /* These are the known usable modes across all TUF/ROG */ |
| if (mode >= 12 || mode == 9) |
| mode = 10; |
| |
| switch (speed) { |
| case 0: |
| speed = 0xe1; |
| break; |
| case 1: |
| speed = 0xeb; |
| break; |
| case 2: |
| speed = 0xf5; |
| break; |
| default: |
| speed = 0xeb; |
| } |
| |
| err = asus_wmi_evaluate_method3(ASUS_WMI_METHODID_DEVS, asus->kbd_rgb_dev, |
| cmd | (mode << 8) | (r << 16) | (g << 24), b | (speed << 8), NULL); |
| if (err) |
| return err; |
| |
| return count; |
| } |
| static DEVICE_ATTR_WO(kbd_rgb_mode); |
| |
| static DEVICE_STRING_ATTR_RO(kbd_rgb_mode_index, 0444, |
| "cmd mode red green blue speed"); |
| |
| static struct attribute *kbd_rgb_mode_attrs[] = { |
| &dev_attr_kbd_rgb_mode.attr, |
| &dev_attr_kbd_rgb_mode_index.attr.attr, |
| NULL, |
| }; |
| |
| static const struct attribute_group kbd_rgb_mode_group = { |
| .attrs = kbd_rgb_mode_attrs, |
| }; |
| |
| /* TUF Laptop Keyboard RGB State **********************************************/ |
| static ssize_t kbd_rgb_state_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| u32 flags, cmd, boot, awake, sleep, keyboard; |
| int err; |
| |
| if (sscanf(buf, "%d %d %d %d %d", &cmd, &boot, &awake, &sleep, &keyboard) != 5) |
| return -EINVAL; |
| |
| if (cmd) |
| cmd = BIT(2); |
| |
| flags = 0; |
| if (boot) |
| flags |= BIT(1); |
| if (awake) |
| flags |= BIT(3); |
| if (sleep) |
| flags |= BIT(5); |
| if (keyboard) |
| flags |= BIT(7); |
| |
| /* 0xbd is the required default arg0 for the method. Nothing happens otherwise */ |
| err = asus_wmi_evaluate_method3(ASUS_WMI_METHODID_DEVS, |
| ASUS_WMI_DEVID_TUF_RGB_STATE, 0xbd | cmd << 8 | (flags << 16), 0, NULL); |
| if (err) |
| return err; |
| |
| return count; |
| } |
| static DEVICE_ATTR_WO(kbd_rgb_state); |
| |
| static DEVICE_STRING_ATTR_RO(kbd_rgb_state_index, 0444, |
| "cmd boot awake sleep keyboard"); |
| |
| static struct attribute *kbd_rgb_state_attrs[] = { |
| &dev_attr_kbd_rgb_state.attr, |
| &dev_attr_kbd_rgb_state_index.attr.attr, |
| NULL, |
| }; |
| |
| static const struct attribute_group kbd_rgb_state_group = { |
| .attrs = kbd_rgb_state_attrs, |
| }; |
| |
| static const struct attribute_group *kbd_rgb_mode_groups[] = { |
| NULL, |
| NULL, |
| NULL, |
| }; |
| |
| /* Tunable: PPT: Intel=PL1, AMD=SPPT *****************************************/ |
| static ssize_t ppt_pl2_sppt_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct asus_wmi *asus = dev_get_drvdata(dev); |
| int result, err; |
| u32 value; |
| |
| result = kstrtou32(buf, 10, &value); |
| if (result) |
| return result; |
| |
| if (value < PPT_TOTAL_MIN || value > PPT_TOTAL_MAX) |
| return -EINVAL; |
| |
| err = asus_wmi_set_devstate(ASUS_WMI_DEVID_PPT_PL2_SPPT, value, &result); |
| if (err) { |
| pr_warn("Failed to set ppt_pl2_sppt: %d\n", err); |
| return err; |
| } |
| |
| if (result > 1) { |
| pr_warn("Failed to set ppt_pl2_sppt (result): 0x%x\n", result); |
| return -EIO; |
| } |
| |
| asus->ppt_pl2_sppt = value; |
| sysfs_notify(&asus->platform_device->dev.kobj, NULL, "ppt_pl2_sppt"); |
| |
| return count; |
| } |
| |
| static ssize_t ppt_pl2_sppt_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct asus_wmi *asus = dev_get_drvdata(dev); |
| |
| return sysfs_emit(buf, "%u\n", asus->ppt_pl2_sppt); |
| } |
| static DEVICE_ATTR_RW(ppt_pl2_sppt); |
| |
| /* Tunable: PPT, Intel=PL1, AMD=SPL ******************************************/ |
| static ssize_t ppt_pl1_spl_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct asus_wmi *asus = dev_get_drvdata(dev); |
| int result, err; |
| u32 value; |
| |
| result = kstrtou32(buf, 10, &value); |
| if (result) |
| return result; |
| |
| if (value < PPT_TOTAL_MIN || value > PPT_TOTAL_MAX) |
| return -EINVAL; |
| |
| err = asus_wmi_set_devstate(ASUS_WMI_DEVID_PPT_PL1_SPL, value, &result); |
| if (err) { |
| pr_warn("Failed to set ppt_pl1_spl: %d\n", err); |
| return err; |
| } |
| |
| if (result > 1) { |
| pr_warn("Failed to set ppt_pl1_spl (result): 0x%x\n", result); |
| return -EIO; |
| } |
| |
| asus->ppt_pl1_spl = value; |
| sysfs_notify(&asus->platform_device->dev.kobj, NULL, "ppt_pl1_spl"); |
| |
| return count; |
| } |
| static ssize_t ppt_pl1_spl_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct asus_wmi *asus = dev_get_drvdata(dev); |
| |
| return sysfs_emit(buf, "%u\n", asus->ppt_pl1_spl); |
| } |
| static DEVICE_ATTR_RW(ppt_pl1_spl); |
| |
| /* Tunable: PPT APU FPPT ******************************************************/ |
| static ssize_t ppt_fppt_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct asus_wmi *asus = dev_get_drvdata(dev); |
| int result, err; |
| u32 value; |
| |
| result = kstrtou32(buf, 10, &value); |
| if (result) |
| return result; |
| |
| if (value < PPT_TOTAL_MIN || value > PPT_TOTAL_MAX) |
| return -EINVAL; |
| |
| err = asus_wmi_set_devstate(ASUS_WMI_DEVID_PPT_FPPT, value, &result); |
| if (err) { |
| pr_warn("Failed to set ppt_fppt: %d\n", err); |
| return err; |
| } |
| |
| if (result > 1) { |
| pr_warn("Failed to set ppt_fppt (result): 0x%x\n", result); |
| return -EIO; |
| } |
| |
| asus->ppt_fppt = value; |
| sysfs_notify(&asus->platform_device->dev.kobj, NULL, "ppt_fpu_sppt"); |
| |
| return count; |
| } |
| |
| static ssize_t ppt_fppt_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct asus_wmi *asus = dev_get_drvdata(dev); |
| |
| return sysfs_emit(buf, "%u\n", asus->ppt_fppt); |
| } |
| static DEVICE_ATTR_RW(ppt_fppt); |
| |
| /* Tunable: PPT APU SPPT *****************************************************/ |
| static ssize_t ppt_apu_sppt_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct asus_wmi *asus = dev_get_drvdata(dev); |
| int result, err; |
| u32 value; |
| |
| result = kstrtou32(buf, 10, &value); |
| if (result) |
| return result; |
| |
| if (value < PPT_CPU_MIN || value > PPT_CPU_MAX) |
| return -EINVAL; |
| |
| err = asus_wmi_set_devstate(ASUS_WMI_DEVID_PPT_APU_SPPT, value, &result); |
| if (err) { |
| pr_warn("Failed to set ppt_apu_sppt: %d\n", err); |
| return err; |
| } |
| |
| if (result > 1) { |
| pr_warn("Failed to set ppt_apu_sppt (result): 0x%x\n", result); |
| return -EIO; |
| } |
| |
| asus->ppt_apu_sppt = value; |
| sysfs_notify(&asus->platform_device->dev.kobj, NULL, "ppt_apu_sppt"); |
| |
| return count; |
| } |
| |
| static ssize_t ppt_apu_sppt_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct asus_wmi *asus = dev_get_drvdata(dev); |
| |
| return sysfs_emit(buf, "%u\n", asus->ppt_apu_sppt); |
| } |
| static DEVICE_ATTR_RW(ppt_apu_sppt); |
| |
| /* Tunable: PPT platform SPPT ************************************************/ |
| static ssize_t ppt_platform_sppt_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct asus_wmi *asus = dev_get_drvdata(dev); |
| int result, err; |
| u32 value; |
| |
| result = kstrtou32(buf, 10, &value); |
| if (result) |
| return result; |
| |
| if (value < PPT_CPU_MIN || value > PPT_CPU_MAX) |
| return -EINVAL; |
| |
| err = asus_wmi_set_devstate(ASUS_WMI_DEVID_PPT_PLAT_SPPT, value, &result); |
| if (err) { |
| pr_warn("Failed to set ppt_platform_sppt: %d\n", err); |
| return err; |
| } |
| |
| if (result > 1) { |
| pr_warn("Failed to set ppt_platform_sppt (result): 0x%x\n", result); |
| return -EIO; |
| } |
| |
| asus->ppt_platform_sppt = value; |
| sysfs_notify(&asus->platform_device->dev.kobj, NULL, "ppt_platform_sppt"); |
| |
| return count; |
| } |
| |
| static ssize_t ppt_platform_sppt_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct asus_wmi *asus = dev_get_drvdata(dev); |
| |
| return sysfs_emit(buf, "%u\n", asus->ppt_platform_sppt); |
| } |
| static DEVICE_ATTR_RW(ppt_platform_sppt); |
| |
| /* Tunable: NVIDIA dynamic boost *********************************************/ |
| static ssize_t nv_dynamic_boost_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct asus_wmi *asus = dev_get_drvdata(dev); |
| int result, err; |
| u32 value; |
| |
| result = kstrtou32(buf, 10, &value); |
| if (result) |
| return result; |
| |
| if (value < NVIDIA_BOOST_MIN || value > NVIDIA_BOOST_MAX) |
| return -EINVAL; |
| |
| err = asus_wmi_set_devstate(ASUS_WMI_DEVID_NV_DYN_BOOST, value, &result); |
| if (err) { |
| pr_warn("Failed to set nv_dynamic_boost: %d\n", err); |
| return err; |
| } |
| |
| if (result > 1) { |
| pr_warn("Failed to set nv_dynamic_boost (result): 0x%x\n", result); |
| return -EIO; |
| } |
| |
| asus->nv_dynamic_boost = value; |
| sysfs_notify(&asus->platform_device->dev.kobj, NULL, "nv_dynamic_boost"); |
| |
| return count; |
| } |
| |
| static ssize_t nv_dynamic_boost_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct asus_wmi *asus = dev_get_drvdata(dev); |
| |
| return sysfs_emit(buf, "%u\n", asus->nv_dynamic_boost); |
| } |
| static DEVICE_ATTR_RW(nv_dynamic_boost); |
| |
| /* Tunable: NVIDIA temperature target ****************************************/ |
| static ssize_t nv_temp_target_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct asus_wmi *asus = dev_get_drvdata(dev); |
| int result, err; |
| u32 value; |
| |
| result = kstrtou32(buf, 10, &value); |
| if (result) |
| return result; |
| |
| if (value < NVIDIA_TEMP_MIN || value > NVIDIA_TEMP_MAX) |
| return -EINVAL; |
| |
| err = asus_wmi_set_devstate(ASUS_WMI_DEVID_NV_THERM_TARGET, value, &result); |
| if (err) { |
| pr_warn("Failed to set nv_temp_target: %d\n", err); |
| return err; |
| } |
| |
| if (result > 1) { |
| pr_warn("Failed to set nv_temp_target (result): 0x%x\n", result); |
| return -EIO; |
| } |
| |
| asus->nv_temp_target = value; |
| sysfs_notify(&asus->platform_device->dev.kobj, NULL, "nv_temp_target"); |
| |
| return count; |
| } |
| |
| static ssize_t nv_temp_target_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct asus_wmi *asus = dev_get_drvdata(dev); |
| |
| return sysfs_emit(buf, "%u\n", asus->nv_temp_target); |
| } |
| static DEVICE_ATTR_RW(nv_temp_target); |
| |
| /* Ally MCU Powersave ********************************************************/ |
| static ssize_t mcu_powersave_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct asus_wmi *asus = dev_get_drvdata(dev); |
| int result; |
| |
| result = asus_wmi_get_devstate_simple(asus, ASUS_WMI_DEVID_MCU_POWERSAVE); |
| if (result < 0) |
| return result; |
| |
| return sysfs_emit(buf, "%d\n", result); |
| } |
| |
| static ssize_t mcu_powersave_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| int result, err; |
| u32 enable; |
| |
| struct asus_wmi *asus = dev_get_drvdata(dev); |
| |
| result = kstrtou32(buf, 10, &enable); |
| if (result) |
| return result; |
| |
| if (enable > 1) |
| return -EINVAL; |
| |
| err = asus_wmi_set_devstate(ASUS_WMI_DEVID_MCU_POWERSAVE, enable, &result); |
| if (err) { |
| pr_warn("Failed to set MCU powersave: %d\n", err); |
| return err; |
| } |
| |
| if (result > 1) { |
| pr_warn("Failed to set MCU powersave (result): 0x%x\n", result); |
| return -EIO; |
| } |
| |
| sysfs_notify(&asus->platform_device->dev.kobj, NULL, "mcu_powersave"); |
| |
| return count; |
| } |
| static DEVICE_ATTR_RW(mcu_powersave); |
| |
| /* Battery ********************************************************************/ |
| |
| /* The battery maximum charging percentage */ |
| static int charge_end_threshold; |
| |
| static ssize_t charge_control_end_threshold_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| int value, ret, rv; |
| |
| ret = kstrtouint(buf, 10, &value); |
| if (ret) |
| return ret; |
| |
| if (value < 0 || value > 100) |
| return -EINVAL; |
| |
| ret = asus_wmi_set_devstate(ASUS_WMI_DEVID_RSOC, value, &rv); |
| if (ret) |
| return ret; |
| |
| if (rv != 1) |
| return -EIO; |
| |
| /* There isn't any method in the DSDT to read the threshold, so we |
| * save the threshold. |
| */ |
| charge_end_threshold = value; |
| return count; |
| } |
| |
| static ssize_t charge_control_end_threshold_show(struct device *device, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| return sysfs_emit(buf, "%d\n", charge_end_threshold); |
| } |
| |
| static DEVICE_ATTR_RW(charge_control_end_threshold); |
| |
| static int asus_wmi_battery_add(struct power_supply *battery, struct acpi_battery_hook *hook) |
| { |
| /* The WMI method does not provide a way to specific a battery, so we |
| * just assume it is the first battery. |
| * Note: On some newer ASUS laptops (Zenbook UM431DA), the primary/first |
| * battery is named BATT. |
| */ |
| if (strcmp(battery->desc->name, "BAT0") != 0 && |
| strcmp(battery->desc->name, "BAT1") != 0 && |
| strcmp(battery->desc->name, "BATC") != 0 && |
| strcmp(battery->desc->name, "BATT") != 0) |
| return -ENODEV; |
| |
| if (device_create_file(&battery->dev, |
| &dev_attr_charge_control_end_threshold)) |
| return -ENODEV; |
| |
| /* The charge threshold is only reset when the system is power cycled, |
| * and we can't get the current threshold so let set it to 100% when |
| * a battery is added. |
| */ |
| asus_wmi_set_devstate(ASUS_WMI_DEVID_RSOC, 100, NULL); |
| charge_end_threshold = 100; |
| |
| return 0; |
| } |
| |
| static int asus_wmi_battery_remove(struct power_supply *battery, struct acpi_battery_hook *hook) |
| { |
| device_remove_file(&battery->dev, |
| &dev_attr_charge_control_end_threshold); |
| return 0; |
| } |
| |
| static struct acpi_battery_hook battery_hook = { |
| .add_battery = asus_wmi_battery_add, |
| .remove_battery = asus_wmi_battery_remove, |
| .name = "ASUS Battery Extension", |
| }; |
| |
| static void asus_wmi_battery_init(struct asus_wmi *asus) |
| { |
| asus->battery_rsoc_available = false; |
| if (asus_wmi_dev_is_present(asus, ASUS_WMI_DEVID_RSOC)) { |
| asus->battery_rsoc_available = true; |
| battery_hook_register(&battery_hook); |
| } |
| } |
| |
| static void asus_wmi_battery_exit(struct asus_wmi *asus) |
| { |
| if (asus->battery_rsoc_available) |
| battery_hook_unregister(&battery_hook); |
| } |
| |
| /* LEDs ***********************************************************************/ |
| |
| /* |
| * These functions actually update the LED's, and are called from a |
| * workqueue. By doing this as separate work rather than when the LED |
| * subsystem asks, we avoid messing with the Asus ACPI stuff during a |
| * potentially bad time, such as a timer interrupt. |
| */ |
| static void tpd_led_update(struct work_struct *work) |
| { |
| int ctrl_param; |
| struct asus_wmi *asus; |
| |
| asus = container_of(work, struct asus_wmi, tpd_led_work); |
| |
| ctrl_param = asus->tpd_led_wk; |
| asus_wmi_set_devstate(ASUS_WMI_DEVID_TOUCHPAD_LED, ctrl_param, NULL); |
| } |
| |
| static void tpd_led_set(struct led_classdev *led_cdev, |
| enum led_brightness value) |
| { |
| struct asus_wmi *asus; |
| |
| asus = container_of(led_cdev, struct asus_wmi, tpd_led); |
| |
| asus->tpd_led_wk = !!value; |
| queue_work(asus->led_workqueue, &asus->tpd_led_work); |
| } |
| |
| static int read_tpd_led_state(struct asus_wmi *asus) |
| { |
| return asus_wmi_get_devstate_simple(asus, ASUS_WMI_DEVID_TOUCHPAD_LED); |
| } |
| |
| static enum led_brightness tpd_led_get(struct led_classdev *led_cdev) |
| { |
| struct asus_wmi *asus; |
| |
| asus = container_of(led_cdev, struct asus_wmi, tpd_led); |
| |
| return read_tpd_led_state(asus); |
| } |
| |
| static void kbd_led_update(struct asus_wmi *asus) |
| { |
| int ctrl_param = 0; |
| |
| ctrl_param = 0x80 | (asus->kbd_led_wk & 0x7F); |
| asus_wmi_set_devstate(ASUS_WMI_DEVID_KBD_BACKLIGHT, ctrl_param, NULL); |
| } |
| |
| static int kbd_led_read(struct asus_wmi *asus, int *level, int *env) |
| { |
| int retval; |
| |
| /* |
| * bits 0-2: level |
| * bit 7: light on/off |
| * bit 8-10: environment (0: dark, 1: normal, 2: light) |
| * bit 17: status unknown |
| */ |
| retval = asus_wmi_get_devstate_bits(asus, ASUS_WMI_DEVID_KBD_BACKLIGHT, |
| 0xFFFF); |
| |
| /* Unknown status is considered as off */ |
| if (retval == 0x8000) |
| retval = 0; |
| |
| if (retval < 0) |
| return retval; |
| |
| if (level) |
| *level = retval & 0x7F; |
| if (env) |
| *env = (retval >> 8) & 0x7F; |
| return 0; |
| } |
| |
| static void do_kbd_led_set(struct led_classdev *led_cdev, int value) |
| { |
| struct asus_wmi *asus; |
| int max_level; |
| |
| asus = container_of(led_cdev, struct asus_wmi, kbd_led); |
| max_level = asus->kbd_led.max_brightness; |
| |
| asus->kbd_led_wk = clamp_val(value, 0, max_level); |
| kbd_led_update(asus); |
| } |
| |
| static void kbd_led_set(struct led_classdev *led_cdev, |
| enum led_brightness value) |
| { |
| /* Prevent disabling keyboard backlight on module unregister */ |
| if (led_cdev->flags & LED_UNREGISTERING) |
| return; |
| |
| do_kbd_led_set(led_cdev, value); |
| } |
| |
| static void kbd_led_set_by_kbd(struct asus_wmi *asus, enum led_brightness value) |
| { |
| struct led_classdev *led_cdev = &asus->kbd_led; |
| |
| do_kbd_led_set(led_cdev, value); |
| led_classdev_notify_brightness_hw_changed(led_cdev, asus->kbd_led_wk); |
| } |
| |
| static enum led_brightness kbd_led_get(struct led_classdev *led_cdev) |
| { |
| struct asus_wmi *asus; |
| int retval, value; |
| |
| asus = container_of(led_cdev, struct asus_wmi, kbd_led); |
| |
| retval = kbd_led_read(asus, &value, NULL); |
| if (retval < 0) |
| return retval; |
| |
| return value; |
| } |
| |
| static int wlan_led_unknown_state(struct asus_wmi *asus) |
| { |
| u32 result; |
| |
| asus_wmi_get_devstate(asus, ASUS_WMI_DEVID_WIRELESS_LED, &result); |
| |
| return result & ASUS_WMI_DSTS_UNKNOWN_BIT; |
| } |
| |
| static void wlan_led_update(struct work_struct *work) |
| { |
| int ctrl_param; |
| struct asus_wmi *asus; |
| |
| asus = container_of(work, struct asus_wmi, wlan_led_work); |
| |
| ctrl_param = asus->wlan_led_wk; |
| asus_wmi_set_devstate(ASUS_WMI_DEVID_WIRELESS_LED, ctrl_param, NULL); |
| } |
| |
| static void wlan_led_set(struct led_classdev *led_cdev, |
| enum led_brightness value) |
| { |
| struct asus_wmi *asus; |
| |
| asus = container_of(led_cdev, struct asus_wmi, wlan_led); |
| |
| asus->wlan_led_wk = !!value; |
| queue_work(asus->led_workqueue, &asus->wlan_led_work); |
| } |
| |
| static enum led_brightness wlan_led_get(struct led_classdev *led_cdev) |
| { |
| struct asus_wmi *asus; |
| u32 result; |
| |
| asus = container_of(led_cdev, struct asus_wmi, wlan_led); |
| asus_wmi_get_devstate(asus, ASUS_WMI_DEVID_WIRELESS_LED, &result); |
| |
| return result & ASUS_WMI_DSTS_BRIGHTNESS_MASK; |
| } |
| |
| static void lightbar_led_update(struct work_struct *work) |
| { |
| struct asus_wmi *asus; |
| int ctrl_param; |
| |
| asus = container_of(work, struct asus_wmi, lightbar_led_work); |
| |
| ctrl_param = asus->lightbar_led_wk; |
| asus_wmi_set_devstate(ASUS_WMI_DEVID_LIGHTBAR, ctrl_param, NULL); |
| } |
| |
| static void lightbar_led_set(struct led_classdev *led_cdev, |
| enum led_brightness value) |
| { |
| struct asus_wmi *asus; |
| |
| asus = container_of(led_cdev, struct asus_wmi, lightbar_led); |
| |
| asus->lightbar_led_wk = !!value; |
| queue_work(asus->led_workqueue, &asus->lightbar_led_work); |
| } |
| |
| static enum led_brightness lightbar_led_get(struct led_classdev *led_cdev) |
| { |
| struct asus_wmi *asus; |
| u32 result; |
| |
| asus = container_of(led_cdev, struct asus_wmi, lightbar_led); |
| asus_wmi_get_devstate(asus, ASUS_WMI_DEVID_LIGHTBAR, &result); |
| |
| return result & ASUS_WMI_DSTS_LIGHTBAR_MASK; |
| } |
| |
| static int micmute_led_set(struct led_classdev *led_cdev, |
| enum led_brightness brightness) |
| { |
| int state = brightness != LED_OFF; |
| int err; |
| |
| err = asus_wmi_set_devstate(ASUS_WMI_DEVID_MICMUTE_LED, state, NULL); |
| return err < 0 ? err : 0; |
| } |
| |
| static enum led_brightness camera_led_get(struct led_classdev *led_cdev) |
| { |
| struct asus_wmi *asus; |
| u32 result; |
| |
| asus = container_of(led_cdev, struct asus_wmi, camera_led); |
| asus_wmi_get_devstate(asus, ASUS_WMI_DEVID_CAMERA_LED, &result); |
| |
| return result & ASUS_WMI_DSTS_BRIGHTNESS_MASK; |
| } |
| |
| static int camera_led_set(struct led_classdev *led_cdev, |
| enum led_brightness brightness) |
| { |
| int state = brightness != LED_OFF; |
| int err; |
| |
| err = asus_wmi_set_devstate(ASUS_WMI_DEVID_CAMERA_LED, state, NULL); |
| return err < 0 ? err : 0; |
| } |
| |
| static void asus_wmi_led_exit(struct asus_wmi *asus) |
| { |
| led_classdev_unregister(&asus->kbd_led); |
| led_classdev_unregister(&asus->tpd_led); |
| led_classdev_unregister(&asus->wlan_led); |
| led_classdev_unregister(&asus->lightbar_led); |
| led_classdev_unregister(&asus->micmute_led); |
| led_classdev_unregister(&asus->camera_led); |
| |
| if (asus->led_workqueue) |
| destroy_workqueue(asus->led_workqueue); |
| } |
| |
| static int asus_wmi_led_init(struct asus_wmi *asus) |
| { |
| int rv = 0, num_rgb_groups = 0, led_val; |
| |
| if (asus->kbd_rgb_dev) |
| kbd_rgb_mode_groups[num_rgb_groups++] = &kbd_rgb_mode_group; |
| if (asus->kbd_rgb_state_available) |
| kbd_rgb_mode_groups[num_rgb_groups++] = &kbd_rgb_state_group; |
| |
| asus->led_workqueue = create_singlethread_workqueue("led_workqueue"); |
| if (!asus->led_workqueue) |
| return -ENOMEM; |
| |
| if (read_tpd_led_state(asus) >= 0) { |
| INIT_WORK(&asus->tpd_led_work, tpd_led_update); |
| |
| asus->tpd_led.name = "asus::touchpad"; |
| asus->tpd_led.brightness_set = tpd_led_set; |
| asus->tpd_led.brightness_get = tpd_led_get; |
| asus->tpd_led.max_brightness = 1; |
| |
| rv = led_classdev_register(&asus->platform_device->dev, |
| &asus->tpd_led); |
| if (rv) |
| goto error; |
| } |
| |
| if (!kbd_led_read(asus, &led_val, NULL) && !dmi_check_system(asus_use_hid_led_dmi_ids)) { |
| pr_info("using asus-wmi for asus::kbd_backlight\n"); |
| asus->kbd_led_wk = led_val; |
| asus->kbd_led.name = "asus::kbd_backlight"; |
| asus->kbd_led.flags = LED_BRIGHT_HW_CHANGED; |
| asus->kbd_led.brightness_set = kbd_led_set; |
| asus->kbd_led.brightness_get = kbd_led_get; |
| asus->kbd_led.max_brightness = 3; |
| |
| if (num_rgb_groups != 0) |
| asus->kbd_led.groups = kbd_rgb_mode_groups; |
| |
| rv = led_classdev_register(&asus->platform_device->dev, |
| &asus->kbd_led); |
| if (rv) |
| goto error; |
| } |
| |
| if (asus_wmi_dev_is_present(asus, ASUS_WMI_DEVID_WIRELESS_LED) |
| && (asus->driver->quirks->wapf > 0)) { |
| INIT_WORK(&asus->wlan_led_work, wlan_led_update); |
| |
| asus->wlan_led.name = "asus::wlan"; |
| asus->wlan_led.brightness_set = wlan_led_set; |
| if (!wlan_led_unknown_state(asus)) |
| asus->wlan_led.brightness_get = wlan_led_get; |
| asus->wlan_led.flags = LED_CORE_SUSPENDRESUME; |
| asus->wlan_led.max_brightness = 1; |
| asus->wlan_led.default_trigger = "asus-wlan"; |
| |
| rv = led_classdev_register(&asus->platform_device->dev, |
| &asus->wlan_led); |
| if (rv) |
| goto error; |
| } |
| |
| if (asus_wmi_dev_is_present(asus, ASUS_WMI_DEVID_LIGHTBAR)) { |
| INIT_WORK(&asus->lightbar_led_work, lightbar_led_update); |
| |
| asus->lightbar_led.name = "asus::lightbar"; |
| asus->lightbar_led.brightness_set = lightbar_led_set; |
| asus->lightbar_led.brightness_get = lightbar_led_get; |
| asus->lightbar_led.max_brightness = 1; |
| |
| rv = led_classdev_register(&asus->platform_device->dev, |
| &asus->lightbar_led); |
| } |
| |
| if (asus_wmi_dev_is_present(asus, ASUS_WMI_DEVID_MICMUTE_LED)) { |
| asus->micmute_led.name = "platform::micmute"; |
| asus->micmute_led.max_brightness = 1; |
| asus->micmute_led.brightness_set_blocking = micmute_led_set; |
| asus->micmute_led.default_trigger = "audio-micmute"; |
| |
| rv = led_classdev_register(&asus->platform_device->dev, |
| &asus->micmute_led); |
| if (rv) |
| goto error; |
| } |
| |
| if (asus_wmi_dev_is_present(asus, ASUS_WMI_DEVID_CAMERA_LED)) { |
| asus->camera_led.name = "asus::camera"; |
| asus->camera_led.max_brightness = 1; |
| asus->camera_led.brightness_get = camera_led_get; |
| asus->camera_led.brightness_set_blocking = camera_led_set; |
| |
| rv = led_classdev_register(&asus->platform_device->dev, |
| &asus->camera_led); |
| if (rv) |
| goto error; |
| } |
| |
| if (asus_wmi_dev_is_present(asus, ASUS_WMI_DEVID_OOBE)) { |
| /* |
| * Disable OOBE state, so that e.g. the keyboard backlight |
| * works. |
| */ |
| rv = asus_wmi_set_devstate(ASUS_WMI_DEVID_OOBE, 1, NULL); |
| if (rv) |
| goto error; |
| } |
| |
| error: |
| if (rv) |
| asus_wmi_led_exit(asus); |
| |
| return rv; |
| } |
| |
| /* RF *************************************************************************/ |
| |
| /* |
| * PCI hotplug (for wlan rfkill) |
| */ |
| static bool asus_wlan_rfkill_blocked(struct asus_wmi *asus) |
| { |
| int result = asus_wmi_get_devstate_simple(asus, ASUS_WMI_DEVID_WLAN); |
| |
| if (result < 0) |
| return false; |
| return !result; |
| } |
| |
| static void asus_rfkill_hotplug(struct asus_wmi *asus) |
| { |
| struct pci_dev *dev; |
| struct pci_bus *bus; |
| bool blocked; |
| bool absent; |
| u32 l; |
| |
| mutex_lock(&asus->wmi_lock); |
| blocked = asus_wlan_rfkill_blocked(asus); |
| mutex_unlock(&asus->wmi_lock); |
| |
| mutex_lock(&asus->hotplug_lock); |
| pci_lock_rescan_remove(); |
| |
| if (asus->wlan.rfkill) |
| rfkill_set_sw_state(asus->wlan.rfkill, blocked); |
| |
| if (asus->hotplug_slot.ops) { |
| bus = pci_find_bus(0, 1); |
| if (!bus) { |
| pr_warn("Unable to find PCI bus 1?\n"); |
| goto out_unlock; |
| } |
| |
| if (pci_bus_read_config_dword(bus, 0, PCI_VENDOR_ID, &l)) { |
| pr_err("Unable to read PCI config space?\n"); |
| goto out_unlock; |
| } |
| absent = (l == 0xffffffff); |
| |
| if (blocked != absent) { |
| pr_warn("BIOS says wireless lan is %s, but the pci device is %s\n", |
| blocked ? "blocked" : "unblocked", |
| absent ? "absent" : "present"); |
| pr_warn("skipped wireless hotplug as probably inappropriate for this model\n"); |
| goto out_unlock; |
| } |
| |
| if (!blocked) { |
| dev = pci_get_slot(bus, 0); |
| if (dev) { |
| /* Device already present */ |
| pci_dev_put(dev); |
| goto out_unlock; |
| } |
| dev = pci_scan_single_device(bus, 0); |
| if (dev) { |
| pci_bus_assign_resources(bus); |
| pci_bus_add_device(dev); |
| } |
| } else { |
| dev = pci_get_slot(bus, 0); |
| if (dev) { |
| pci_stop_and_remove_bus_device(dev); |
| pci_dev_put(dev); |
| } |
| } |
| } |
| |
| out_unlock: |
| pci_unlock_rescan_remove(); |
| mutex_unlock(&asus->hotplug_lock); |
| } |
| |
| static void asus_rfkill_notify(acpi_handle handle, u32 event, void *data) |
| { |
| struct asus_wmi *asus = data; |
| |
| if (event != ACPI_NOTIFY_BUS_CHECK) |
| return; |
| |
| /* |
| * We can't call directly asus_rfkill_hotplug because most |
| * of the time WMBC is still being executed and not reetrant. |
| * There is currently no way to tell ACPICA that we want this |
| * method to be serialized, we schedule a asus_rfkill_hotplug |
| * call later, in a safer context. |
| */ |
| queue_work(asus->hotplug_workqueue, &asus->hotplug_work); |
| } |
| |
| static int asus_register_rfkill_notifier(struct asus_wmi *asus, char *node) |
| { |
| acpi_status status; |
| acpi_handle handle; |
| |
| status = acpi_get_handle(NULL, node, &handle); |
| if (ACPI_FAILURE(status)) |
| return -ENODEV; |
| |
| status = acpi_install_notify_handler(handle, ACPI_SYSTEM_NOTIFY, |
| asus_rfkill_notify, asus); |
| if (ACPI_FAILURE(status)) |
| pr_warn("Failed to register notify on %s\n", node); |
| |
| return 0; |
| } |
| |
| static void asus_unregister_rfkill_notifier(struct asus_wmi *asus, char *node) |
| { |
| acpi_status status = AE_OK; |
| acpi_handle handle; |
| |
| status = acpi_get_handle(NULL, node, &handle); |
| if (ACPI_FAILURE(status)) |
| return; |
| |
| status = acpi_remove_notify_handler(handle, ACPI_SYSTEM_NOTIFY, |
| asus_rfkill_notify); |
| if (ACPI_FAILURE(status)) |
| pr_err("Error removing rfkill notify handler %s\n", node); |
| } |
| |
| static int asus_get_adapter_status(struct hotplug_slot *hotplug_slot, |
| u8 *value) |
| { |
| struct asus_wmi *asus = container_of(hotplug_slot, |
| struct asus_wmi, hotplug_slot); |
| int result = asus_wmi_get_devstate_simple(asus, ASUS_WMI_DEVID_WLAN); |
| |
| if (result < 0) |
| return result; |
| |
| *value = !!result; |
| return 0; |
| } |
| |
| static const struct hotplug_slot_ops asus_hotplug_slot_ops = { |
| .get_adapter_status = asus_get_adapter_status, |
| .get_power_status = asus_get_adapter_status, |
| }; |
| |
| static void asus_hotplug_work(struct work_struct *work) |
| { |
| struct asus_wmi *asus; |
| |
| asus = container_of(work, struct asus_wmi, hotplug_work); |
| asus_rfkill_hotplug(asus); |
| } |
| |
| static int asus_setup_pci_hotplug(struct asus_wmi *asus) |
| { |
| int ret = -ENOMEM; |
| struct pci_bus *bus = pci_find_bus(0, 1); |
| |
| if (!bus) { |
| pr_err("Unable to find wifi PCI bus\n"); |
| return -ENODEV; |
| } |
| |
| asus->hotplug_workqueue = |
| create_singlethread_workqueue("hotplug_workqueue"); |
| if (!asus->hotplug_workqueue) |
| goto error_workqueue; |
| |
| INIT_WORK(&asus->hotplug_work, asus_hotplug_work); |
| |
| asus->hotplug_slot.ops = &asus_hotplug_slot_ops; |
| |
| ret = pci_hp_register(&asus->hotplug_slot, bus, 0, "asus-wifi"); |
| if (ret) { |
| pr_err("Unable to register hotplug slot - %d\n", ret); |
| goto error_register; |
| } |
| |
| return 0; |
| |
| error_register: |
| asus->hotplug_slot.ops = NULL; |
| destroy_workqueue(asus->hotplug_workqueue); |
| error_workqueue: |
| return ret; |
| } |
| |
| /* |
| * Rfkill devices |
| */ |
| static int asus_rfkill_set(void *data, bool blocked) |
| { |
| struct asus_rfkill *priv = data; |
| u32 ctrl_param = !blocked; |
| u32 dev_id = priv->dev_id; |
| |
| /* |
| * If the user bit is set, BIOS can't set and record the wlan status, |
| * it will report the value read from id ASUS_WMI_DEVID_WLAN_LED |
| * while we query the wlan status through WMI(ASUS_WMI_DEVID_WLAN). |
| * So, we have to record wlan status in id ASUS_WMI_DEVID_WLAN_LED |
| * while setting the wlan status through WMI. |
| * This is also the behavior that windows app will do. |
| */ |
| if ((dev_id == ASUS_WMI_DEVID_WLAN) && |
| priv->asus->driver->wlan_ctrl_by_user) |
| dev_id = ASUS_WMI_DEVID_WLAN_LED; |
| |
| return asus_wmi_set_devstate(dev_id, ctrl_param, NULL); |
| } |
| |
| static void asus_rfkill_query(struct rfkill *rfkill, void *data) |
| { |
| struct asus_rfkill *priv = data; |
| int result; |
| |
| result = asus_wmi_get_devstate_simple(priv->asus, priv->dev_id); |
| |
| if (result < 0) |
| return; |
| |
| rfkill_set_sw_state(priv->rfkill, !result); |
| } |
| |
| static int asus_rfkill_wlan_set(void *data, bool blocked) |
| { |
| struct asus_rfkill *priv = data; |
| struct asus_wmi *asus = priv->asus; |
| int ret; |
| |
| /* |
| * This handler is enabled only if hotplug is enabled. |
| * In this case, the asus_wmi_set_devstate() will |
| * trigger a wmi notification and we need to wait |
| * this call to finish before being able to call |
| * any wmi method |
| */ |
| mutex_lock(&asus->wmi_lock); |
| ret = asus_rfkill_set(data, blocked); |
| mutex_unlock(&asus->wmi_lock); |
| return ret; |
| } |
| |
| static const struct rfkill_ops asus_rfkill_wlan_ops = { |
| .set_block = asus_rfkill_wlan_set, |
| .query = asus_rfkill_query, |
| }; |
| |
| static const struct rfkill_ops asus_rfkill_ops = { |
| .set_block = asus_rfkill_set, |
| .query = asus_rfkill_query, |
| }; |
| |
| static int asus_new_rfkill(struct asus_wmi *asus, |
| struct asus_rfkill *arfkill, |
| const char *name, enum rfkill_type type, int dev_id) |
| { |
| int result = asus_wmi_get_devstate_simple(asus, dev_id); |
| struct rfkill **rfkill = &arfkill->rfkill; |
| |
| if (result < 0) |
| return result; |
| |
| arfkill->dev_id = dev_id; |
| arfkill->asus = asus; |
| |
| if (dev_id == ASUS_WMI_DEVID_WLAN && |
| asus->driver->quirks->hotplug_wireless) |
| *rfkill = rfkill_alloc(name, &asus->platform_device->dev, type, |
| &asus_rfkill_wlan_ops, arfkill); |
| else |
| *rfkill = rfkill_alloc(name, &asus->platform_device->dev, type, |
| &asus_rfkill_ops, arfkill); |
| |
| if (!*rfkill) |
| return -EINVAL; |
| |
| if ((dev_id == ASUS_WMI_DEVID_WLAN) && |
| (asus->driver->quirks->wapf > 0)) |
| rfkill_set_led_trigger_name(*rfkill, "asus-wlan"); |
| |
| rfkill_init_sw_state(*rfkill, !result); |
| result = rfkill_register(*rfkill); |
| if (result) { |
| rfkill_destroy(*rfkill); |
| *rfkill = NULL; |
| return result; |
| } |
| return 0; |
| } |
| |
| static void asus_wmi_rfkill_exit(struct asus_wmi *asus) |
| { |
| if (asus->driver->wlan_ctrl_by_user && ashs_present()) |
| return; |
| |
| asus_unregister_rfkill_notifier(asus, "\\_SB.PCI0.P0P5"); |
| asus_unregister_rfkill_notifier(asus, "\\_SB.PCI0.P0P6"); |
| asus_unregister_rfkill_notifier(asus, "\\_SB.PCI0.P0P7"); |
| if (asus->wlan.rfkill) { |
| rfkill_unregister(asus->wlan.rfkill); |
| rfkill_destroy(asus->wlan.rfkill); |
| asus->wlan.rfkill = NULL; |
| } |
| /* |
| * Refresh pci hotplug in case the rfkill state was changed after |
| * asus_unregister_rfkill_notifier() |
| */ |
| asus_rfkill_hotplug(asus); |
| if (asus->hotplug_slot.ops) |
| pci_hp_deregister(&asus->hotplug_slot); |
| if (asus->hotplug_workqueue) |
| destroy_workqueue(asus->hotplug_workqueue); |
| |
| if (asus->bluetooth.rfkill) { |
| rfkill_unregister(asus->bluetooth.rfkill); |
| rfkill_destroy(asus->bluetooth.rfkill); |
| asus->bluetooth.rfkill = NULL; |
| } |
| if (asus->wimax.rfkill) { |
| rfkill_unregister(asus->wimax.rfkill); |
| rfkill_destroy(asus->wimax.rfkill); |
| asus->wimax.rfkill = NULL; |
| } |
| if (asus->wwan3g.rfkill) { |
| rfkill_unregister(asus->wwan3g.rfkill); |
| rfkill_destroy(asus->wwan3g.rfkill); |
| asus->wwan3g.rfkill = NULL; |
| } |
| if (asus->gps.rfkill) { |
| rfkill_unregister(asus->gps.rfkill); |
| rfkill_destroy(asus->gps.rfkill); |
| asus->gps.rfkill = NULL; |
| } |
| if (asus->uwb.rfkill) { |
| rfkill_unregister(asus->uwb.rfkill); |
| rfkill_destroy(asus->uwb.rfkill); |
| asus->uwb.rfkill = NULL; |
| } |
| } |
| |
| static int asus_wmi_rfkill_init(struct asus_wmi *asus) |
| { |
| int result = 0; |
| |
| mutex_init(&asus->hotplug_lock); |
| mutex_init(&asus->wmi_lock); |
| |
| result = asus_new_rfkill(asus, &asus->wlan, "asus-wlan", |
| RFKILL_TYPE_WLAN, ASUS_WMI_DEVID_WLAN); |
| |
| if (result && result != -ENODEV) |
| goto exit; |
| |
| result = asus_new_rfkill(asus, &asus->bluetooth, |
| "asus-bluetooth", RFKILL_TYPE_BLUETOOTH, |
| ASUS_WMI_DEVID_BLUETOOTH); |
| |
| if (result && result != -ENODEV) |
| goto exit; |
| |
| result = asus_new_rfkill(asus, &asus->wimax, "asus-wimax", |
| RFKILL_TYPE_WIMAX, ASUS_WMI_DEVID_WIMAX); |
| |
| if (result && result != -ENODEV) |
| goto exit; |
| |
| result = asus_new_rfkill(asus, &asus->wwan3g, "asus-wwan3g", |
| RFKILL_TYPE_WWAN, ASUS_WMI_DEVID_WWAN3G); |
| |
| if (result && result != -ENODEV) |
| goto exit; |
| |
| result = asus_new_rfkill(asus, &asus->gps, "asus-gps", |
| RFKILL_TYPE_GPS, ASUS_WMI_DEVID_GPS); |
| |
| if (result && result != -ENODEV) |
| goto exit; |
| |
| result = asus_new_rfkill(asus, &asus->uwb, "asus-uwb", |
| RFKILL_TYPE_UWB, ASUS_WMI_DEVID_UWB); |
| |
| if (result && result != -ENODEV) |
| goto exit; |
| |
| if (!asus->driver->quirks->hotplug_wireless) |
| goto exit; |
| |
| result = asus_setup_pci_hotplug(asus); |
| /* |
| * If we get -EBUSY then something else is handling the PCI hotplug - |
| * don't fail in this case |
| */ |
| if (result == -EBUSY) |
| result = 0; |
| |
| asus_register_rfkill_notifier(asus, "\\_SB.PCI0.P0P5"); |
| asus_register_rfkill_notifier(asus, "\\_SB.PCI0.P0P6"); |
| asus_register_rfkill_notifier(asus, "\\_SB.PCI0.P0P7"); |
| /* |
| * Refresh pci hotplug in case the rfkill state was changed during |
| * setup. |
| */ |
| asus_rfkill_hotplug(asus); |
| |
| exit: |
| if (result && result != -ENODEV) |
| asus_wmi_rfkill_exit(asus); |
| |
| if (result == -ENODEV) |
| result = 0; |
| |
| return result; |
| } |
| |
| /* Panel Overdrive ************************************************************/ |
| static ssize_t panel_od_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct asus_wmi *asus = dev_get_drvdata(dev); |
| int result; |
| |
| result = asus_wmi_get_devstate_simple(asus, ASUS_WMI_DEVID_PANEL_OD); |
| if (result < 0) |
| return result; |
| |
| return sysfs_emit(buf, "%d\n", result); |
| } |
| |
| static ssize_t panel_od_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| int result, err; |
| u32 overdrive; |
| |
| struct asus_wmi *asus = dev_get_drvdata(dev); |
| |
| result = kstrtou32(buf, 10, &overdrive); |
| if (result) |
| return result; |
| |
| if (overdrive > 1) |
| return -EINVAL; |
| |
| err = asus_wmi_set_devstate(ASUS_WMI_DEVID_PANEL_OD, overdrive, &result); |
| |
| if (err) { |
| pr_warn("Failed to set panel overdrive: %d\n", err); |
| return err; |
| } |
| |
| if (result > 1) { |
| pr_warn("Failed to set panel overdrive (result): 0x%x\n", result); |
| return -EIO; |
| } |
| |
| sysfs_notify(&asus->platform_device->dev.kobj, NULL, "panel_od"); |
| |
| return count; |
| } |
| static DEVICE_ATTR_RW(panel_od); |
| |
| /* Bootup sound ***************************************************************/ |
| |
| static ssize_t boot_sound_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct asus_wmi *asus = dev_get_drvdata(dev); |
| int result; |
| |
| result = asus_wmi_get_devstate_simple(asus, ASUS_WMI_DEVID_BOOT_SOUND); |
| if (result < 0) |
| return result; |
| |
| return sysfs_emit(buf, "%d\n", result); |
| } |
| |
| static ssize_t boot_sound_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| int result, err; |
| u32 snd; |
| |
| struct asus_wmi *asus = dev_get_drvdata(dev); |
| |
| result = kstrtou32(buf, 10, &snd); |
| if (result) |
| return result; |
| |
| if (snd > 1) |
| return -EINVAL; |
| |
| err = asus_wmi_set_devstate(ASUS_WMI_DEVID_BOOT_SOUND, snd, &result); |
| if (err) { |
| pr_warn("Failed to set boot sound: %d\n", err); |
| return err; |
| } |
| |
| if (result > 1) { |
| pr_warn("Failed to set panel boot sound (result): 0x%x\n", result); |
| return -EIO; |
| } |
| |
| sysfs_notify(&asus->platform_device->dev.kobj, NULL, "boot_sound"); |
| |
| return count; |
| } |
| static DEVICE_ATTR_RW(boot_sound); |
| |
| /* Mini-LED mode **************************************************************/ |
| static ssize_t mini_led_mode_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct asus_wmi *asus = dev_get_drvdata(dev); |
| u32 value; |
| int err; |
| |
| err = asus_wmi_get_devstate(asus, asus->mini_led_dev_id, &value); |
| if (err < 0) |
| return err; |
| value = value & ASUS_MINI_LED_MODE_MASK; |
| |
| /* |
| * Remap the mode values to match previous generation mini-led. The last gen |
| * WMI 0 == off, while on this version WMI 2 ==off (flipped). |
| */ |
| if (asus->mini_led_dev_id == ASUS_WMI_DEVID_MINI_LED_MODE2) { |
| switch (value) { |
| case ASUS_MINI_LED_2024_WEAK: |
| value = ASUS_MINI_LED_ON; |
| break; |
| case ASUS_MINI_LED_2024_STRONG: |
| value = ASUS_MINI_LED_STRONG_MODE; |
| break; |
| case ASUS_MINI_LED_2024_OFF: |
| value = ASUS_MINI_LED_OFF; |
| break; |
| } |
| } |
| |
| return sysfs_emit(buf, "%d\n", value); |
| } |
| |
| static ssize_t mini_led_mode_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| int result, err; |
| u32 mode; |
| |
| struct asus_wmi *asus = dev_get_drvdata(dev); |
| |
| result = kstrtou32(buf, 10, &mode); |
| if (result) |
| return result; |
| |
| if (asus->mini_led_dev_id == ASUS_WMI_DEVID_MINI_LED_MODE && |
| mode > ASUS_MINI_LED_ON) |
| return -EINVAL; |
| if (asus->mini_led_dev_id == ASUS_WMI_DEVID_MINI_LED_MODE2 && |
| mode > ASUS_MINI_LED_STRONG_MODE) |
| return -EINVAL; |
| |
| /* |
| * Remap the mode values so expected behaviour is the same as the last |
| * generation of mini-LED with 0 == off, 1 == on. |
| */ |
| if (asus->mini_led_dev_id == ASUS_WMI_DEVID_MINI_LED_MODE2) { |
| switch (mode) { |
| case ASUS_MINI_LED_OFF: |
| mode = ASUS_MINI_LED_2024_OFF; |
| break; |
| case ASUS_MINI_LED_ON: |
| mode = ASUS_MINI_LED_2024_WEAK; |
| break; |
| case ASUS_MINI_LED_STRONG_MODE: |
| mode = ASUS_MINI_LED_2024_STRONG; |
| break; |
| } |
| } |
| |
| err = asus_wmi_set_devstate(asus->mini_led_dev_id, mode, &result); |
| if (err) { |
| pr_warn("Failed to set mini-LED: %d\n", err); |
| return err; |
| } |
| |
| if (result > 1) { |
| pr_warn("Failed to set mini-LED mode (result): 0x%x\n", result); |
| return -EIO; |
| } |
| |
| sysfs_notify(&asus->platform_device->dev.kobj, NULL, "mini_led_mode"); |
| |
| return count; |
| } |
| static DEVICE_ATTR_RW(mini_led_mode); |
| |
| static ssize_t available_mini_led_mode_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct asus_wmi *asus = dev_get_drvdata(dev); |
| |
| switch (asus->mini_led_dev_id) { |
| case ASUS_WMI_DEVID_MINI_LED_MODE: |
| return sysfs_emit(buf, "0 1\n"); |
| case ASUS_WMI_DEVID_MINI_LED_MODE2: |
| return sysfs_emit(buf, "0 1 2\n"); |
| } |
| |
| return sysfs_emit(buf, "0\n"); |
| } |
| |
| static DEVICE_ATTR_RO(available_mini_led_mode); |
| |
| /* Quirks *********************************************************************/ |
| |
| static void asus_wmi_set_xusb2pr(struct asus_wmi *asus) |
| { |
| struct pci_dev *xhci_pdev; |
| u32 orig_ports_available; |
| u32 ports_available = asus->driver->quirks->xusb2pr; |
| |
| xhci_pdev = pci_get_device(PCI_VENDOR_ID_INTEL, |
| PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI, |
| NULL); |
| |
| if (!xhci_pdev) |
| return; |
| |
| pci_read_config_dword(xhci_pdev, USB_INTEL_XUSB2PR, |
| &orig_ports_available); |
| |
| pci_write_config_dword(xhci_pdev, USB_INTEL_XUSB2PR, |
| cpu_to_le32(ports_available)); |
| |
| pci_dev_put(xhci_pdev); |
| |
| pr_info("set USB_INTEL_XUSB2PR old: 0x%04x, new: 0x%04x\n", |
| orig_ports_available, ports_available); |
| } |
| |
| /* |
| * Some devices dont support or have borcken get_als method |
| * but still support set method. |
| */ |
| static void asus_wmi_set_als(void) |
| { |
| asus_wmi_set_devstate(ASUS_WMI_DEVID_ALS_ENABLE, 1, NULL); |
| } |
| |
| /* Hwmon device ***************************************************************/ |
| |
| static int asus_agfn_fan_speed_read(struct asus_wmi *asus, int fan, |
| int *speed) |
| { |
| struct agfn_fan_args args = { |
| .agfn.len = sizeof(args), |
| .agfn.mfun = ASUS_FAN_MFUN, |
| .agfn.sfun = ASUS_FAN_SFUN_READ, |
| .fan = fan, |
| .speed = 0, |
| }; |
| struct acpi_buffer input = { (acpi_size) sizeof(args), &args }; |
| int status; |
| |
| if (fan != 1) |
| return -EINVAL; |
| |
| status = asus_wmi_evaluate_method_agfn(input); |
| |
| if (status || args.agfn.err) |
| return -ENXIO; |
| |
| if (speed) |
| *speed = args.speed; |
| |
| return 0; |
| } |
| |
| static int asus_agfn_fan_speed_write(struct asus_wmi *asus, int fan, |
| int *speed) |
| { |
| struct agfn_fan_args args = { |
| .agfn.len = sizeof(args), |
| .agfn.mfun = ASUS_FAN_MFUN, |
| .agfn.sfun = ASUS_FAN_SFUN_WRITE, |
| .fan = fan, |
| .speed = speed ? *speed : 0, |
| }; |
| struct acpi_buffer input = { (acpi_size) sizeof(args), &args }; |
| int status; |
| |
| /* 1: for setting 1st fan's speed 0: setting auto mode */ |
| if (fan != 1 && fan != 0) |
| return -EINVAL; |
| |
| status = asus_wmi_evaluate_method_agfn(input); |
| |
| if (status || args.agfn.err) |
| return -ENXIO; |
| |
| if (speed && fan == 1) |
| asus->agfn_pwm = *speed; |
| |
| return 0; |
| } |
| |
| /* |
| * Check if we can read the speed of one fan. If true we assume we can also |
| * control it. |
| */ |
| static bool asus_wmi_has_agfn_fan(struct asus_wmi *asus) |
| { |
| int status; |
| int speed; |
| u32 value; |
| |
| status = asus_agfn_fan_speed_read(asus, 1, &speed); |
| if (status != 0) |
| return false; |
| |
| status = asus_wmi_get_devstate(asus, ASUS_WMI_DEVID_FAN_CTRL, &value); |
| if (status != 0) |
| return false; |
| |
| /* |
| * We need to find a better way, probably using sfun, |
| * bits or spec ... |
| * Currently we disable it if: |
| * - ASUS_WMI_UNSUPPORTED_METHOD is returned |
| * - reverved bits are non-zero |
| * - sfun and presence bit are not set |
| */ |
| return !(value == ASUS_WMI_UNSUPPORTED_METHOD || value & 0xFFF80000 |
| || (!asus->sfun && !(value & ASUS_WMI_DSTS_PRESENCE_BIT))); |
| } |
| |
| static int asus_fan_set_auto(struct asus_wmi *asus) |
| { |
| int status; |
| u32 retval; |
| |
| switch (asus->fan_type) { |
| case FAN_TYPE_SPEC83: |
| status = asus_wmi_set_devstate(ASUS_WMI_DEVID_CPU_FAN_CTRL, |
| 0, &retval); |
| if (status) |
| return status; |
| |
| if (retval != 1) |
| return -EIO; |
| break; |
| |
| case FAN_TYPE_AGFN: |
| status = asus_agfn_fan_speed_write(asus, 0, NULL); |
| if (status) |
| return -ENXIO; |
| break; |
| |
| default: |
| return -ENXIO; |
| } |
| |
| /* |
| * Modern models like the G713 also have GPU fan control (this is not AGFN) |
| */ |
| if (asus->gpu_fan_type == FAN_TYPE_SPEC83) { |
| status = asus_wmi_set_devstate(ASUS_WMI_DEVID_GPU_FAN_CTRL, |
| 0, &retval); |
| if (status) |
| return status; |
| |
| if (retval != 1) |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| static ssize_t pwm1_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct asus_wmi *asus = dev_get_drvdata(dev); |
| int err; |
| int value; |
| |
| /* If we already set a value then just return it */ |
| if (asus->agfn_pwm >= 0) |
| return sysfs_emit(buf, "%d\n", asus->agfn_pwm); |
| |
| /* |
| * If we haven't set already set a value through the AGFN interface, |
| * we read a current value through the (now-deprecated) FAN_CTRL device. |
| */ |
| err = asus_wmi_get_devstate(asus, ASUS_WMI_DEVID_FAN_CTRL, &value); |
| if (err < 0) |
| return err; |
| |
| value &= 0xFF; |
| |
| if (value == 1) /* Low Speed */ |
| value = 85; |
| else if (value == 2) |
| value = 170; |
| else if (value == 3) |
| value = 255; |
| else if (value) { |
| pr_err("Unknown fan speed %#x\n", value); |
| value = -1; |
| } |
| |
| return sysfs_emit(buf, "%d\n", value); |
| } |
| |
| static ssize_t pwm1_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) { |
| struct asus_wmi *asus = dev_get_drvdata(dev); |
| int value; |
| int state; |
| int ret; |
| |
| ret = kstrtouint(buf, 10, &value); |
| if (ret) |
| return ret; |
| |
| value = clamp(value, 0, 255); |
| |
| state = asus_agfn_fan_speed_write(asus, 1, &value); |
| if (state) |
| pr_warn("Setting fan speed failed: %d\n", state); |
| else |
| asus->fan_pwm_mode = ASUS_FAN_CTRL_MANUAL; |
| |
| return count; |
| } |
| |
| static ssize_t fan1_input_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct asus_wmi *asus = dev_get_drvdata(dev); |
| int value; |
| int ret; |
| |
| switch (asus->fan_type) { |
| case FAN_TYPE_SPEC83: |
| ret = asus_wmi_get_devstate(asus, ASUS_WMI_DEVID_CPU_FAN_CTRL, |
| &value); |
| if (ret < 0) |
| return ret; |
| |
| value &= 0xffff; |
| break; |
| |
| case FAN_TYPE_AGFN: |
| /* no speed readable on manual mode */ |
| if (asus->fan_pwm_mode == ASUS_FAN_CTRL_MANUAL) |
| return -ENXIO; |
| |
| ret = asus_agfn_fan_speed_read(asus, 1, &value); |
| if (ret) { |
| pr_warn("reading fan speed failed: %d\n", ret); |
| return -ENXIO; |
| } |
| break; |
| |
| default: |
| return -ENXIO; |
| } |
| |
| return sysfs_emit(buf, "%d\n", value < 0 ? -1 : value * 100); |
| } |
| |
| static ssize_t pwm1_enable_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct asus_wmi *asus = dev_get_drvdata(dev); |
| |
| /* |
| * Just read back the cached pwm mode. |
| * |
| * For the CPU_FAN device, the spec indicates that we should be |
| * able to read the device status and consult bit 19 to see if we |
| * are in Full On or Automatic mode. However, this does not work |
| * in practice on X532FL at least (the bit is always 0) and there's |
| * also nothing in the DSDT to indicate that this behaviour exists. |
| */ |
| return sysfs_emit(buf, "%d\n", asus->fan_pwm_mode); |
| } |
| |
| static ssize_t pwm1_enable_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct asus_wmi *asus = dev_get_drvdata(dev); |
| int status = 0; |
| int state; |
| int value; |
| int ret; |
| u32 retval; |
| |
| ret = kstrtouint(buf, 10, &state); |
| if (ret) |
| return ret; |
| |
| if (asus->fan_type == FAN_TYPE_SPEC83) { |
| switch (state) { /* standard documented hwmon values */ |
| case ASUS_FAN_CTRL_FULLSPEED: |
| value = 1; |
| break; |
| case ASUS_FAN_CTRL_AUTO: |
| value = 0; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| ret = asus_wmi_set_devstate(ASUS_WMI_DEVID_CPU_FAN_CTRL, |
| value, &retval); |
| if (ret) |
| return ret; |
| |
| if (retval != 1) |
| return -EIO; |
| } else if (asus->fan_type == FAN_TYPE_AGFN) { |
| switch (state) { |
| case ASUS_FAN_CTRL_MANUAL: |
| break; |
| |
| case ASUS_FAN_CTRL_AUTO: |
| status = asus_fan_set_auto(asus); |
| if (status) |
| return status; |
| break; |
| |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| asus->fan_pwm_mode = state; |
| |
| /* Must set to disabled if mode is toggled */ |
| if (asus->cpu_fan_curve_available) |
| asus->custom_fan_curves[FAN_CURVE_DEV_CPU].enabled = false; |
| if (asus->gpu_fan_curve_available) |
| asus->custom_fan_curves[FAN_CURVE_DEV_GPU].enabled = false; |
| if (asus->mid_fan_curve_available) |
| asus->custom_fan_curves[FAN_CURVE_DEV_MID].enabled = false; |
| |
| return count; |
| } |
| |
| static ssize_t asus_hwmon_temp1(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct asus_wmi *asus = dev_get_drvdata(dev); |
| u32 value; |
| int err; |
| |
| err = asus_wmi_get_devstate(asus, ASUS_WMI_DEVID_THERMAL_CTRL, &value); |
| if (err < 0) |
| return err; |
| |
| return sysfs_emit(buf, "%ld\n", |
| deci_kelvin_to_millicelsius(value & 0xFFFF)); |
| } |
| |
| /* GPU fan on modern ROG laptops */ |
| static ssize_t fan2_input_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct asus_wmi *asus = dev_get_drvdata(dev); |
| int value; |
| int ret; |
| |
| ret = asus_wmi_get_devstate(asus, ASUS_WMI_DEVID_GPU_FAN_CTRL, &value); |
| if (ret < 0) |
| return ret; |
| |
| value &= 0xffff; |
| |
| return sysfs_emit(buf, "%d\n", value * 100); |
| } |
| |
| /* Middle/Center fan on modern ROG laptops */ |
| static ssize_t fan3_input_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct asus_wmi *asus = dev_get_drvdata(dev); |
| int value; |
| int ret; |
| |
| ret = asus_wmi_get_devstate(asus, ASUS_WMI_DEVID_MID_FAN_CTRL, &value); |
| if (ret < 0) |
| return ret; |
| |
| value &= 0xffff; |
| |
| return sysfs_emit(buf, "%d\n", value * 100); |
| } |
| |
| static ssize_t pwm2_enable_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct asus_wmi *asus = dev_get_drvdata(dev); |
| |
| return sysfs_emit(buf, "%d\n", asus->gpu_fan_pwm_mode); |
| } |
| |
| static ssize_t pwm2_enable_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct asus_wmi *asus = dev_get_drvdata(dev); |
| int state; |
| int value; |
| int ret; |
| u32 retval; |
| |
| ret = kstrtouint(buf, 10, &state); |
| if (ret) |
| return ret; |
| |
| switch (state) { /* standard documented hwmon values */ |
| case ASUS_FAN_CTRL_FULLSPEED: |
| value = 1; |
| break; |
| case ASUS_FAN_CTRL_AUTO: |
| value = 0; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| ret = asus_wmi_set_devstate(ASUS_WMI_DEVID_GPU_FAN_CTRL, |
| value, &retval); |
| if (ret) |
| return ret; |
| |
| if (retval != 1) |
| return -EIO; |
| |
| asus->gpu_fan_pwm_mode = state; |
| return count; |
| } |
| |
| static ssize_t pwm3_enable_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct asus_wmi *asus = dev_get_drvdata(dev); |
| |
| return sysfs_emit(buf, "%d\n", asus->mid_fan_pwm_mode); |
| } |
| |
| static ssize_t pwm3_enable_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct asus_wmi *asus = dev_get_drvdata(dev); |
| int state; |
| int value; |
| int ret; |
| u32 retval; |
| |
| ret = kstrtouint(buf, 10, &state); |
| if (ret) |
| return ret; |
| |
| switch (state) { /* standard documented hwmon values */ |
| case ASUS_FAN_CTRL_FULLSPEED: |
| value = 1; |
| break; |
| case ASUS_FAN_CTRL_AUTO: |
| value = 0; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| ret = asus_wmi_set_devstate(ASUS_WMI_DEVID_MID_FAN_CTRL, |
| value, &retval); |
| if (ret) |
| return ret; |
| |
| if (retval != 1) |
| return -EIO; |
| |
| asus->mid_fan_pwm_mode = state; |
| return count; |
| } |
| |
| /* Fan1 */ |
| static DEVICE_ATTR_RW(pwm1); |
| static DEVICE_ATTR_RW(pwm1_enable); |
| static DEVICE_ATTR_RO(fan1_input); |
| static DEVICE_STRING_ATTR_RO(fan1_label, 0444, ASUS_FAN_DESC); |
| |
| /* Fan2 - GPU fan */ |
| static DEVICE_ATTR_RW(pwm2_enable); |
| static DEVICE_ATTR_RO(fan2_input); |
| static DEVICE_STRING_ATTR_RO(fan2_label, 0444, ASUS_GPU_FAN_DESC); |
| /* Fan3 - Middle/center fan */ |
| static DEVICE_ATTR_RW(pwm3_enable); |
| static DEVICE_ATTR_RO(fan3_input); |
| static DEVICE_STRING_ATTR_RO(fan3_label, 0444, ASUS_MID_FAN_DESC); |
| |
| /* Temperature */ |
| static DEVICE_ATTR(temp1_input, S_IRUGO, asus_hwmon_temp1, NULL); |
| |
| static struct attribute *hwmon_attributes[] = { |
| &dev_attr_pwm1.attr, |
| &dev_attr_pwm1_enable.attr, |
| &dev_attr_pwm2_enable.attr, |
| &dev_attr_pwm3_enable.attr, |
| &dev_attr_fan1_input.attr, |
| &dev_attr_fan1_label.attr.attr, |
| &dev_attr_fan2_input.attr, |
| &dev_attr_fan2_label.attr.attr, |
| &dev_attr_fan3_input.attr, |
| &dev_attr_fan3_label.attr.attr, |
| |
| &dev_attr_temp1_input.attr, |
| NULL |
| }; |
| |
| static umode_t asus_hwmon_sysfs_is_visible(struct kobject *kobj, |
| struct attribute *attr, int idx) |
| { |
| struct device *dev = kobj_to_dev(kobj); |
| struct asus_wmi *asus = dev_get_drvdata(dev->parent); |
| u32 value = ASUS_WMI_UNSUPPORTED_METHOD; |
| |
| if (attr == &dev_attr_pwm1.attr) { |
| if (asus->fan_type != FAN_TYPE_AGFN) |
| return 0; |
| } else if (attr == &dev_attr_fan1_input.attr |
| || attr == &dev_attr_fan1_label.attr.attr |
| || attr == &dev_attr_pwm1_enable.attr) { |
| if (asus->fan_type == FAN_TYPE_NONE) |
| return 0; |
| } else if (attr == &dev_attr_fan2_input.attr |
| || attr == &dev_attr_fan2_label.attr.attr |
| || attr == &dev_attr_pwm2_enable.attr) { |
| if (asus->gpu_fan_type == FAN_TYPE_NONE) |
| return 0; |
| } else if (attr == &dev_attr_fan3_input.attr |
| || attr == &dev_attr_fan3_label.attr.attr |
| || attr == &dev_attr_pwm3_enable.attr) { |
| if (asus->mid_fan_type == FAN_TYPE_NONE) |
| return 0; |
| } else if (attr == &dev_attr_temp1_input.attr) { |
| int err = asus_wmi_get_devstate(asus, |
| ASUS_WMI_DEVID_THERMAL_CTRL, |
| &value); |
| |
| if (err < 0) |
| return 0; /* can't return negative here */ |
| |
| /* |
| * If the temperature value in deci-Kelvin is near the absolute |
| * zero temperature, something is clearly wrong |
| */ |
| if (value == 0 || value == 1) |
| return 0; |
| } |
| |
| return attr->mode; |
| } |
| |
| static const struct attribute_group hwmon_attribute_group = { |
| .is_visible = asus_hwmon_sysfs_is_visible, |
| .attrs = hwmon_attributes |
| }; |
| __ATTRIBUTE_GROUPS(hwmon_attribute); |
| |
| static int asus_wmi_hwmon_init(struct asus_wmi *asus) |
| { |
| struct device *dev = &asus->platform_device->dev; |
| struct device *hwmon; |
| |
| hwmon = devm_hwmon_device_register_with_groups(dev, "asus", asus, |
| hwmon_attribute_groups); |
| |
| if (IS_ERR(hwmon)) { |
| pr_err("Could not register asus hwmon device\n"); |
| return PTR_ERR(hwmon); |
| } |
| return 0; |
| } |
| |
| static int asus_wmi_fan_init(struct asus_wmi *asus) |
| { |
| asus->gpu_fan_type = FAN_TYPE_NONE; |
| asus->mid_fan_type = FAN_TYPE_NONE; |
| asus->fan_type = FAN_TYPE_NONE; |
| asus->agfn_pwm = -1; |
| |
| if (asus->driver->quirks->wmi_ignore_fan) |
| asus->fan_type = FAN_TYPE_NONE; |
| else if (asus_wmi_dev_is_present(asus, ASUS_WMI_DEVID_CPU_FAN_CTRL)) |
| asus->fan_type = FAN_TYPE_SPEC83; |
| else if (asus_wmi_has_agfn_fan(asus)) |
| asus->fan_type = FAN_TYPE_AGFN; |
| |
| /* Modern models like G713 also have GPU fan control */ |
| if (asus_wmi_dev_is_present(asus, ASUS_WMI_DEVID_GPU_FAN_CTRL)) |
| asus->gpu_fan_type = FAN_TYPE_SPEC83; |
| |
| /* Some models also have a center/middle fan */ |
| if (asus_wmi_dev_is_present(asus, ASUS_WMI_DEVID_MID_FAN_CTRL)) |
| asus->mid_fan_type = FAN_TYPE_SPEC83; |
| |
| if (asus->fan_type == FAN_TYPE_NONE) |
| return -ENODEV; |
| |
| asus_fan_set_auto(asus); |
| asus->fan_pwm_mode = ASUS_FAN_CTRL_AUTO; |
| return 0; |
| } |
| |
| /* Fan mode *******************************************************************/ |
| |
| static int fan_boost_mode_check_present(struct asus_wmi *asus) |
| { |
| u32 result; |
| int err; |
| |
| asus->fan_boost_mode_available = false; |
| |
| err = asus_wmi_get_devstate(asus, ASUS_WMI_DEVID_FAN_BOOST_MODE, |
| &result); |
| if (err) { |
| if (err == -ENODEV) |
| return 0; |
| else |
| return err; |
| } |
| |
| if ((result & ASUS_WMI_DSTS_PRESENCE_BIT) && |
| (result & ASUS_FAN_BOOST_MODES_MASK)) { |
| asus->fan_boost_mode_available = true; |
| asus->fan_boost_mode_mask = result & ASUS_FAN_BOOST_MODES_MASK; |
| } |
| |
| return 0; |
| } |
| |
| static int fan_boost_mode_write(struct asus_wmi *asus) |
| { |
| u32 retval; |
| u8 value; |
| int err; |
| |
| value = asus->fan_boost_mode; |
| |
| pr_info("Set fan boost mode: %u\n", value); |
| err = asus_wmi_set_devstate(ASUS_WMI_DEVID_FAN_BOOST_MODE, value, |
| &retval); |
| |
| sysfs_notify(&asus->platform_device->dev.kobj, NULL, |
| "fan_boost_mode"); |
| |
| if (err) { |
| pr_warn("Failed to set fan boost mode: %d\n", err); |
| return err; |
| } |
| |
| if (retval != 1) { |
| pr_warn("Failed to set fan boost mode (retval): 0x%x\n", |
| retval); |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| static int fan_boost_mode_switch_next(struct asus_wmi *asus) |
| { |
| u8 mask = asus->fan_boost_mode_mask; |
| |
| if (asus->fan_boost_mode == ASUS_FAN_BOOST_MODE_NORMAL) { |
| if (mask & ASUS_FAN_BOOST_MODE_OVERBOOST_MASK) |
| asus->fan_boost_mode = ASUS_FAN_BOOST_MODE_OVERBOOST; |
| else if (mask & ASUS_FAN_BOOST_MODE_SILENT_MASK) |
| asus->fan_boost_mode = ASUS_FAN_BOOST_MODE_SILENT; |
| } else if (asus->fan_boost_mode == ASUS_FAN_BOOST_MODE_OVERBOOST) { |
| if (mask & ASUS_FAN_BOOST_MODE_SILENT_MASK) |
| asus->fan_boost_mode = ASUS_FAN_BOOST_MODE_SILENT; |
| else |
| asus->fan_boost_mode = ASUS_FAN_BOOST_MODE_NORMAL; |
| } else { |
| asus->fan_boost_mode = ASUS_FAN_BOOST_MODE_NORMAL; |
| } |
| |
| return fan_boost_mode_write(asus); |
| } |
| |
| static ssize_t fan_boost_mode_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct asus_wmi *asus = dev_get_drvdata(dev); |
| |
| return sysfs_emit(buf, "%d\n", asus->fan_boost_mode); |
| } |
| |
| static ssize_t fan_boost_mode_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct asus_wmi *asus = dev_get_drvdata(dev); |
| u8 mask = asus->fan_boost_mode_mask; |
| u8 new_mode; |
| int result; |
| |
| result = kstrtou8(buf, 10, &new_mode); |
| if (result < 0) { |
| pr_warn("Trying to store invalid value\n"); |
| return result; |
| } |
| |
| if (new_mode == ASUS_FAN_BOOST_MODE_OVERBOOST) { |
| if (!(mask & ASUS_FAN_BOOST_MODE_OVERBOOST_MASK)) |
| return -EINVAL; |
| } else if (new_mode == ASUS_FAN_BOOST_MODE_SILENT) { |
| if (!(mask & ASUS_FAN_BOOST_MODE_SILENT_MASK)) |
| return -EINVAL; |
| } else if (new_mode != ASUS_FAN_BOOST_MODE_NORMAL) { |
| return -EINVAL; |
| } |
| |
| asus->fan_boost_mode = new_mode; |
| fan_boost_mode_write(asus); |
| |
| return count; |
| } |
| |
| // Fan boost mode: 0 - normal, 1 - overboost, 2 - silent |
| static DEVICE_ATTR_RW(fan_boost_mode); |
| |
| /* Custom fan curves **********************************************************/ |
| |
| static void fan_curve_copy_from_buf(struct fan_curve_data *data, u8 *buf) |
| { |
| int i; |
| |
| for (i = 0; i < FAN_CURVE_POINTS; i++) { |
| data->temps[i] = buf[i]; |
| } |
| |
| for (i = 0; i < FAN_CURVE_POINTS; i++) { |
| data->percents[i] = |
| 255 * buf[i + FAN_CURVE_POINTS] / 100; |
| } |
| } |
| |
| static int fan_curve_get_factory_default(struct asus_wmi *asus, u32 fan_dev) |
| { |
| struct fan_curve_data *curves; |
| u8 buf[FAN_CURVE_BUF_LEN]; |
| int err, fan_idx; |
| u8 mode = 0; |
| |
| if (asus->throttle_thermal_policy_dev) |
| mode = asus->throttle_thermal_policy_mode; |
| /* DEVID_<C/G>PU_FAN_CURVE is switched for OVERBOOST vs SILENT */ |
| if (mode == 2) |
| mode = 1; |
| else if (mode == 1) |
| mode = 2; |
| |
| err = asus_wmi_evaluate_method_buf(asus->dsts_id, fan_dev, mode, buf, |
| FAN_CURVE_BUF_LEN); |
| if (err) { |
| pr_warn("%s (0x%08x) failed: %d\n", __func__, fan_dev, err); |
| return err; |
| } |
| |
| fan_idx = FAN_CURVE_DEV_CPU; |
| if (fan_dev == ASUS_WMI_DEVID_GPU_FAN_CURVE) |
| fan_idx = FAN_CURVE_DEV_GPU; |
| |
| if (fan_dev == ASUS_WMI_DEVID_MID_FAN_CURVE) |
| fan_idx = FAN_CURVE_DEV_MID; |
| |
| curves = &asus->custom_fan_curves[fan_idx]; |
| curves->device_id = fan_dev; |
| |
| fan_curve_copy_from_buf(curves, buf); |
| return 0; |
| } |
| |
| /* Check if capability exists, and populate defaults */ |
| static int fan_curve_check_present(struct asus_wmi *asus, bool *available, |
| u32 fan_dev) |
| { |
| int err; |
| |
| *available = false; |
| |
| if (asus->fan_type == FAN_TYPE_NONE) |
| return 0; |
| |
| err = fan_curve_get_factory_default(asus, fan_dev); |
| if (err) { |
| return 0; |
| } |
| |
| *available = true; |
| return 0; |
| } |
| |
| /* Determine which fan the attribute is for if SENSOR_ATTR */ |
| static struct fan_curve_data *fan_curve_attr_select(struct asus_wmi *asus, |
| struct device_attribute *attr) |
| { |
| int index = to_sensor_dev_attr(attr)->index; |
| |
| return &asus->custom_fan_curves[index]; |
| } |
| |
| /* Determine which fan the attribute is for if SENSOR_ATTR_2 */ |
| static struct fan_curve_data *fan_curve_attr_2_select(struct asus_wmi *asus, |
| struct device_attribute *attr) |
| { |
| int nr = to_sensor_dev_attr_2(attr)->nr; |
| |
| return &asus->custom_fan_curves[nr & ~FAN_CURVE_PWM_MASK]; |
| } |
| |
| static ssize_t fan_curve_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct sensor_device_attribute_2 *dev_attr = to_sensor_dev_attr_2(attr); |
| struct asus_wmi *asus = dev_get_drvdata(dev); |
| struct fan_curve_data *data; |
| int value, pwm, index; |
| |
| data = fan_curve_attr_2_select(asus, attr); |
| pwm = dev_attr->nr & FAN_CURVE_PWM_MASK; |
| index = dev_attr->index; |
| |
| if (pwm) |
| value = data->percents[index]; |
| else |
| value = data->temps[index]; |
| |
| return sysfs_emit(buf, "%d\n", value); |
| } |
| |
| /* |
| * "fan_dev" is the related WMI method such as ASUS_WMI_DEVID_CPU_FAN_CURVE. |
| */ |
| static int fan_curve_write(struct asus_wmi *asus, |
| struct fan_curve_data *data) |
| { |
| u32 arg1 = 0, arg2 = 0, arg3 = 0, arg4 = 0; |
| u8 *percents = data->percents; |
| u8 *temps = data->temps; |
| int ret, i, shift = 0; |
| |
| if (!data->enabled) |
| return 0; |
| |
| for (i = 0; i < FAN_CURVE_POINTS / 2; i++) { |
| arg1 += (temps[i]) << shift; |
| arg2 += (temps[i + 4]) << shift; |
| /* Scale to percentage for device */ |
| arg3 += (100 * percents[i] / 255) << shift; |
| arg4 += (100 * percents[i + 4] / 255) << shift; |
| shift += 8; |
| } |
| |
| return asus_wmi_evaluate_method5(ASUS_WMI_METHODID_DEVS, |
| data->device_id, |
| arg1, arg2, arg3, arg4, &ret); |
| } |
| |
| static ssize_t fan_curve_store(struct device *dev, |
| struct device_attribute *attr, const char *buf, |
| size_t count) |
| { |
| struct sensor_device_attribute_2 *dev_attr = to_sensor_dev_attr_2(attr); |
| struct asus_wmi *asus = dev_get_drvdata(dev); |
| struct fan_curve_data *data; |
| int err, pwm, index; |
| u8 value; |
| |
| data = fan_curve_attr_2_select(asus, attr); |
| pwm = dev_attr->nr & FAN_CURVE_PWM_MASK; |
| index = dev_attr->index; |
| |
| err = kstrtou8(buf, 10, &value); |
| if (err < 0) |
| return err; |
| |
| if (pwm) |
| data->percents[index] = value; |
| else |
| data->temps[index] = value; |
| |
| /* |
| * Mark as disabled so the user has to explicitly enable to apply a |
| * changed fan curve. This prevents potential lockups from writing out |
| * many changes as one-write-per-change. |
| */ |
| data->enabled = false; |
| |
| return count; |
| } |
| |
| static ssize_t fan_curve_enable_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct asus_wmi *asus = dev_get_drvdata(dev); |
| struct fan_curve_data *data; |
| int out = 2; |
| |
| data = fan_curve_attr_select(asus, attr); |
| |
| if (data->enabled) |
| out = 1; |
| |
| return sysfs_emit(buf, "%d\n", out); |
| } |
| |
| static ssize_t fan_curve_enable_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct asus_wmi *asus = dev_get_drvdata(dev); |
| struct fan_curve_data *data; |
| int value, err; |
| |
| data = fan_curve_attr_select(asus, attr); |
| |
| err = kstrtoint(buf, 10, &value); |
| if (err < 0) |
| return err; |
| |
| switch (value) { |
| case 1: |
| data->enabled = true; |
| break; |
| case 2: |
| data->enabled = false; |
| break; |
| /* |
| * Auto + reset the fan curve data to defaults. Make it an explicit |
| * option so that users don't accidentally overwrite a set fan curve. |
| */ |
| case 3: |
| err = fan_curve_get_factory_default(asus, data->device_id); |
| if (err) |
| return err; |
| data->enabled = false; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| if (data->enabled) { |
| err = fan_curve_write(asus, data); |
| if (err) |
| return err; |
| } else { |
| /* |
| * For machines with throttle this is the only way to reset fans |
| * to default mode of operation (does not erase curve data). |
| */ |
| if (asus->throttle_thermal_policy_dev) { |
| err = throttle_thermal_policy_write(asus); |
| if (err) |
| return err; |
| /* Similar is true for laptops with this fan */ |
| } else if (asus->fan_type == FAN_TYPE_SPEC83) { |
| err = asus_fan_set_auto(asus); |
| if (err) |
| return err; |
| } else { |
| /* Safeguard against fautly ACPI tables */ |
| err = fan_curve_get_factory_default(asus, data->device_id); |
| if (err) |
| return err; |
| err = fan_curve_write(asus, data); |
| if (err) |
| return err; |
| } |
| } |
| return count; |
| } |
| |
| /* CPU */ |
| static SENSOR_DEVICE_ATTR_RW(pwm1_enable, fan_curve_enable, FAN_CURVE_DEV_CPU); |
| static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point1_temp, fan_curve, |
| FAN_CURVE_DEV_CPU, 0); |
| static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point2_temp, fan_curve, |
| FAN_CURVE_DEV_CPU, 1); |
| static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point3_temp, fan_curve, |
| FAN_CURVE_DEV_CPU, 2); |
| static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point4_temp, fan_curve, |
| FAN_CURVE_DEV_CPU, 3); |
| static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point5_temp, fan_curve, |
| FAN_CURVE_DEV_CPU, 4); |
| static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point6_temp, fan_curve, |
| FAN_CURVE_DEV_CPU, 5); |
| static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point7_temp, fan_curve, |
| FAN_CURVE_DEV_CPU, 6); |
| static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point8_temp, fan_curve, |
| FAN_CURVE_DEV_CPU, 7); |
| |
| static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point1_pwm, fan_curve, |
| FAN_CURVE_DEV_CPU | FAN_CURVE_PWM_MASK, 0); |
| static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point2_pwm, fan_curve, |
| FAN_CURVE_DEV_CPU | FAN_CURVE_PWM_MASK, 1); |
| static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point3_pwm, fan_curve, |
| FAN_CURVE_DEV_CPU | FAN_CURVE_PWM_MASK, 2); |
| static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point4_pwm, fan_curve, |
| FAN_CURVE_DEV_CPU | FAN_CURVE_PWM_MASK, 3); |
| static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point5_pwm, fan_curve, |
| FAN_CURVE_DEV_CPU | FAN_CURVE_PWM_MASK, 4); |
| static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point6_pwm, fan_curve, |
| FAN_CURVE_DEV_CPU | FAN_CURVE_PWM_MASK, 5); |
| static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point7_pwm, fan_curve, |
| FAN_CURVE_DEV_CPU | FAN_CURVE_PWM_MASK, 6); |
| static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point8_pwm, fan_curve, |
| FAN_CURVE_DEV_CPU | FAN_CURVE_PWM_MASK, 7); |
| |
| /* GPU */ |
| static SENSOR_DEVICE_ATTR_RW(pwm2_enable, fan_curve_enable, FAN_CURVE_DEV_GPU); |
| static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point1_temp, fan_curve, |
| FAN_CURVE_DEV_GPU, 0); |
| static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point2_temp, fan_curve, |
| FAN_CURVE_DEV_GPU, 1); |
| static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point3_temp, fan_curve, |
| FAN_CURVE_DEV_GPU, 2); |
| static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point4_temp, fan_curve, |
| FAN_CURVE_DEV_GPU, 3); |
| static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point5_temp, fan_curve, |
| FAN_CURVE_DEV_GPU, 4); |
| static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point6_temp, fan_curve, |
| FAN_CURVE_DEV_GPU, 5); |
| static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point7_temp, fan_curve, |
| FAN_CURVE_DEV_GPU, 6); |
| static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point8_temp, fan_curve, |
| FAN_CURVE_DEV_GPU, 7); |
| |
| static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point1_pwm, fan_curve, |
| FAN_CURVE_DEV_GPU | FAN_CURVE_PWM_MASK, 0); |
| static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point2_pwm, fan_curve, |
| FAN_CURVE_DEV_GPU | FAN_CURVE_PWM_MASK, 1); |
| static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point3_pwm, fan_curve, |
| FAN_CURVE_DEV_GPU | FAN_CURVE_PWM_MASK, 2); |
| static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point4_pwm, fan_curve, |
| FAN_CURVE_DEV_GPU | FAN_CURVE_PWM_MASK, 3); |
| static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point5_pwm, fan_curve, |
| FAN_CURVE_DEV_GPU | FAN_CURVE_PWM_MASK, 4); |
| static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point6_pwm, fan_curve, |
| FAN_CURVE_DEV_GPU | FAN_CURVE_PWM_MASK, 5); |
| static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point7_pwm, fan_curve, |
| FAN_CURVE_DEV_GPU | FAN_CURVE_PWM_MASK, 6); |
| static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point8_pwm, fan_curve, |
| FAN_CURVE_DEV_GPU | FAN_CURVE_PWM_MASK, 7); |
| |
| /* MID */ |
| static SENSOR_DEVICE_ATTR_RW(pwm3_enable, fan_curve_enable, FAN_CURVE_DEV_MID); |
| static SENSOR_DEVICE_ATTR_2_RW(pwm3_auto_point1_temp, fan_curve, |
| FAN_CURVE_DEV_MID, 0); |
| static SENSOR_DEVICE_ATTR_2_RW(pwm3_auto_point2_temp, fan_curve, |
| FAN_CURVE_DEV_MID, 1); |
| static SENSOR_DEVICE_ATTR_2_RW(pwm3_auto_point3_temp, fan_curve, |
| FAN_CURVE_DEV_MID, 2); |
| static SENSOR_DEVICE_ATTR_2_RW(pwm3_auto_point4_temp, fan_curve, |
| FAN_CURVE_DEV_MID, 3); |
| static SENSOR_DEVICE_ATTR_2_RW(pwm3_auto_point5_temp, fan_curve, |
| FAN_CURVE_DEV_MID, 4); |
| static SENSOR_DEVICE_ATTR_2_RW(pwm3_auto_point6_temp, fan_curve, |
| FAN_CURVE_DEV_MID, 5); |
| static SENSOR_DEVICE_ATTR_2_RW(pwm3_auto_point7_temp, fan_curve, |
| FAN_CURVE_DEV_MID, 6); |
| static SENSOR_DEVICE_ATTR_2_RW(pwm3_auto_point8_temp, fan_curve, |
| FAN_CURVE_DEV_MID, 7); |
| |
| static SENSOR_DEVICE_ATTR_2_RW(pwm3_auto_point1_pwm, fan_curve, |
| FAN_CURVE_DEV_MID | FAN_CURVE_PWM_MASK, 0); |
| static SENSOR_DEVICE_ATTR_2_RW(pwm3_auto_point2_pwm, fan_curve, |
| FAN_CURVE_DEV_MID | FAN_CURVE_PWM_MASK, 1); |
| static SENSOR_DEVICE_ATTR_2_RW(pwm3_auto_point3_pwm, fan_curve, |
| FAN_CURVE_DEV_MID | FAN_CURVE_PWM_MASK, 2); |
| static SENSOR_DEVICE_ATTR_2_RW(pwm3_auto_point4_pwm, fan_curve, |
| FAN_CURVE_DEV_MID | FAN_CURVE_PWM_MASK, 3); |
| static SENSOR_DEVICE_ATTR_2_RW(pwm3_auto_point5_pwm, fan_curve, |
| FAN_CURVE_DEV_MID | FAN_CURVE_PWM_MASK, 4); |
| static SENSOR_DEVICE_ATTR_2_RW(pwm3_auto_point6_pwm, fan_curve, |
| FAN_CURVE_DEV_MID | FAN_CURVE_PWM_MASK, 5); |
| static SENSOR_DEVICE_ATTR_2_RW(pwm3_auto_point7_pwm, fan_curve, |
| FAN_CURVE_DEV_MID | FAN_CURVE_PWM_MASK, 6); |
| static SENSOR_DEVICE_ATTR_2_RW(pwm3_auto_point8_pwm, fan_curve, |
| FAN_CURVE_DEV_MID | FAN_CURVE_PWM_MASK, 7); |
| |
| static struct attribute *asus_fan_curve_attr[] = { |
| /* CPU */ |
| &sensor_dev_attr_pwm1_enable.dev_attr.attr, |
| &sensor_dev_attr_pwm1_auto_point1_temp.dev_attr.attr, |
| &sensor_dev_attr_pwm1_auto_point2_temp.dev_attr.attr, |
| &sensor_dev_attr_pwm1_auto_point3_temp.dev_attr.attr, |
| &sensor_dev_attr_pwm1_auto_point4_temp.dev_attr.attr, |
| &sensor_dev_attr_pwm1_auto_point5_temp.dev_attr.attr, |
| &sensor_dev_attr_pwm1_auto_point6_temp.dev_attr.attr, |
| &sensor_dev_attr_pwm1_auto_point7_temp.dev_attr.attr, |
| &sensor_dev_attr_pwm1_auto_point8_temp.dev_attr.attr, |
| &sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr, |
| &sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr, |
| &sensor_dev_attr_pwm1_auto_point3_pwm.dev_attr.attr, |
| &sensor_dev_attr_pwm1_auto_point4_pwm.dev_attr.attr, |
| &sensor_dev_attr_pwm1_auto_point5_pwm.dev_attr.attr, |
| &sensor_dev_attr_pwm1_auto_point6_pwm.dev_attr.attr, |
| &sensor_dev_attr_pwm1_auto_point7_pwm.dev_attr.attr, |
| &sensor_dev_attr_pwm1_auto_point8_pwm.dev_attr.attr, |
| /* GPU */ |
| &sensor_dev_attr_pwm2_enable.dev_attr.attr, |
| &sensor_dev_attr_pwm2_auto_point1_temp.dev_attr.attr, |
| &sensor_dev_attr_pwm2_auto_point2_temp.dev_attr.attr, |
| &sensor_dev_attr_pwm2_auto_point3_temp.dev_attr.attr, |
| &sensor_dev_attr_pwm2_auto_point4_temp.dev_attr.attr, |
| &sensor_dev_attr_pwm2_auto_point5_temp.dev_attr.attr, |
| &sensor_dev_attr_pwm2_auto_point6_temp.dev_attr.attr, |
| &sensor_dev_attr_pwm2_auto_point7_temp.dev_attr.attr, |
| &sensor_dev_attr_pwm2_auto_point8_temp.dev_attr.attr, |
| &sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr, |
| &sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr, |
| &sensor_dev_attr_pwm2_auto_point3_pwm.dev_attr.attr, |
| &sensor_dev_attr_pwm2_auto_point4_pwm.dev_attr.attr, |
| &sensor_dev_attr_pwm2_auto_point5_pwm.dev_attr.attr, |
| &sensor_dev_attr_pwm2_auto_point6_pwm.dev_attr.attr, |
| &sensor_dev_attr_pwm2_auto_point7_pwm.dev_attr.attr, |
| &sensor_dev_attr_pwm2_auto_point8_pwm.dev_attr.attr, |
| /* MID */ |
| &sensor_dev_attr_pwm3_enable.dev_attr.attr, |
| &sensor_dev_attr_pwm3_auto_point1_temp.dev_attr.attr, |
| &sensor_dev_attr_pwm3_auto_point2_temp.dev_attr.attr, |
| &sensor_dev_attr_pwm3_auto_point3_temp.dev_attr.attr, |
| &sensor_dev_attr_pwm3_auto_point4_temp.dev_attr.attr, |
| &sensor_dev_attr_pwm3_auto_point5_temp.dev_attr.attr, |
| &sensor_dev_attr_pwm3_auto_point6_temp.dev_attr.attr, |
| &sensor_dev_attr_pwm3_auto_point7_temp.dev_attr.attr, |
| &sensor_dev_attr_pwm3_auto_point8_temp.dev_attr.attr, |
| &sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr, |
| &sensor_dev_attr_pwm3_auto_point2_pwm.dev_attr.attr, |
| &sensor_dev_attr_pwm3_auto_point3_pwm.dev_attr.attr, |
| &sensor_dev_attr_pwm3_auto_point4_pwm.dev_attr.attr, |
| &sensor_dev_attr_pwm3_auto_point5_pwm.dev_attr.attr, |
| &sensor_dev_attr_pwm3_auto_point6_pwm.dev_attr.attr, |
| &sensor_dev_attr_pwm3_auto_point7_pwm.dev_attr.attr, |
| &sensor_dev_attr_pwm3_auto_point8_pwm.dev_attr.attr, |
| NULL |
| }; |
| |
| static umode_t asus_fan_curve_is_visible(struct kobject *kobj, |
| struct attribute *attr, int idx) |
| { |
| struct device *dev = kobj_to_dev(kobj); |
| struct asus_wmi *asus = dev_get_drvdata(dev->parent); |
| |
| /* |
| * Check the char instead of casting attr as there are two attr types |
| * involved here (attr1 and attr2) |
| */ |
| if (asus->cpu_fan_curve_available && attr->name[3] == '1') |
| return 0644; |
| |
| if (asus->gpu_fan_curve_available && attr->name[3] == '2') |
| return 0644; |
| |
| if (asus->mid_fan_curve_available && attr->name[3] == '3') |
| return 0644; |
| |
| return 0; |
| } |
| |
| static const struct attribute_group asus_fan_curve_attr_group = { |
| .is_visible = asus_fan_curve_is_visible, |
| .attrs = asus_fan_curve_attr, |
| }; |
| __ATTRIBUTE_GROUPS(asus_fan_curve_attr); |
| |
| /* |
| * Must be initialised after throttle_thermal_policy_dev is set as |
| * we check the status of throttle_thermal_policy_dev during init. |
| */ |
| static int asus_wmi_custom_fan_curve_init(struct asus_wmi *asus) |
| { |
| struct device *dev = &asus->platform_device->dev; |
| struct device *hwmon; |
| int err; |
| |
| err = fan_curve_check_present(asus, &asus->cpu_fan_curve_available, |
| ASUS_WMI_DEVID_CPU_FAN_CURVE); |
| if (err) { |
| pr_debug("%s, checked 0x%08x, failed: %d\n", |
| __func__, ASUS_WMI_DEVID_CPU_FAN_CURVE, err); |
| return err; |
| } |
| |
| err = fan_curve_check_present(asus, &asus->gpu_fan_curve_available, |
| ASUS_WMI_DEVID_GPU_FAN_CURVE); |
| if (err) { |
| pr_debug("%s, checked 0x%08x, failed: %d\n", |
| __func__, ASUS_WMI_DEVID_GPU_FAN_CURVE, err); |
| return err; |
| } |
| |
| err = fan_curve_check_present(asus, &asus->mid_fan_curve_available, |
| ASUS_WMI_DEVID_MID_FAN_CURVE); |
| if (err) { |
| pr_debug("%s, checked 0x%08x, failed: %d\n", |
| __func__, ASUS_WMI_DEVID_MID_FAN_CURVE, err); |
| return err; |
| } |
| |
| if (!asus->cpu_fan_curve_available |
| && !asus->gpu_fan_curve_available |
| && !asus->mid_fan_curve_available) |
| return 0; |
| |
| hwmon = devm_hwmon_device_register_with_groups( |
| dev, "asus_custom_fan_curve", asus, asus_fan_curve_attr_groups); |
| |
| if (IS_ERR(hwmon)) { |
| dev_err(dev, |
| "Could not register asus_custom_fan_curve device\n"); |
| return PTR_ERR(hwmon); |
| } |
| |
| return 0; |
| } |
| |
| /* Throttle thermal policy ****************************************************/ |
| static int throttle_thermal_policy_write(struct asus_wmi *asus) |
| { |
| u8 value = asus->throttle_thermal_policy_mode; |
| u32 retval; |
| int err; |
| |
| err = asus_wmi_set_devstate(asus->throttle_thermal_policy_dev, |
| value, &retval); |
| |
| sysfs_notify(&asus->platform_device->dev.kobj, NULL, |
| "throttle_thermal_policy"); |
| |
| if (err) { |
| pr_warn("Failed to set throttle thermal policy: %d\n", err); |
| return err; |
| } |
| |
| if (retval != 1) { |
| pr_warn("Failed to set throttle thermal policy (retval): 0x%x\n", |
| retval); |
| return -EIO; |
| } |
| |
| /* Must set to disabled if mode is toggled */ |
| if (asus->cpu_fan_curve_available) |
| asus->custom_fan_curves[FAN_CURVE_DEV_CPU].enabled = false; |
| if (asus->gpu_fan_curve_available) |
| asus->custom_fan_curves[FAN_CURVE_DEV_GPU].enabled = false; |
| if (asus->mid_fan_curve_available) |
| asus->custom_fan_curves[FAN_CURVE_DEV_MID].enabled = false; |
| |
| return 0; |
| } |
| |
| static int throttle_thermal_policy_set_default(struct asus_wmi *asus) |
| { |
| if (!asus->throttle_thermal_policy_dev) |
| return 0; |
| |
| asus->throttle_thermal_policy_mode = ASUS_THROTTLE_THERMAL_POLICY_DEFAULT; |
| return throttle_thermal_policy_write(asus); |
| } |
| |
| static int throttle_thermal_policy_switch_next(struct asus_wmi *asus) |
| { |
| u8 new_mode = asus->throttle_thermal_policy_mode + 1; |
| int err; |
| |
| if (new_mode > PLATFORM_PROFILE_MAX) |
| new_mode = ASUS_THROTTLE_THERMAL_POLICY_DEFAULT; |
| |
| asus->throttle_thermal_policy_mode = new_mode; |
| err = throttle_thermal_policy_write(asus); |
| if (err) |
| return err; |
| |
| /* |
| * Ensure that platform_profile updates userspace with the change to ensure |
| * that platform_profile and throttle_thermal_policy_mode are in sync. |
| */ |
| platform_profile_notify(); |
| |
| return 0; |
| } |
| |
| static ssize_t throttle_thermal_policy_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct asus_wmi *asus = dev_get_drvdata(dev); |
| u8 mode = asus->throttle_thermal_policy_mode; |
| |
| return sysfs_emit(buf, "%d\n", mode); |
| } |
| |
| static ssize_t throttle_thermal_policy_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct asus_wmi *asus = dev_get_drvdata(dev); |
| u8 new_mode; |
| int result; |
| int err; |
| |
| result = kstrtou8(buf, 10, &new_mode); |
| if (result < 0) |
| return result; |
| |
| if (new_mode > PLATFORM_PROFILE_MAX) |
| return -EINVAL; |
| |
| asus->throttle_thermal_policy_mode = new_mode; |
| err = throttle_thermal_policy_write(asus); |
| if (err) |
| return err; |
| |
| /* |
| * Ensure that platform_profile updates userspace with the change to ensure |
| * that platform_profile and throttle_thermal_policy_mode are in sync. |
| */ |
| platform_profile_notify(); |
| |
| return count; |
| } |
| |
| /* |
| * Throttle thermal policy: 0 - default, 1 - overboost, 2 - silent |
| */ |
| static DEVICE_ATTR_RW(throttle_thermal_policy); |
| |
| /* Platform profile ***********************************************************/ |
| static int asus_wmi_platform_profile_to_vivo(struct asus_wmi *asus, int mode) |
| { |
| bool vivo; |
| |
| vivo = asus->throttle_thermal_policy_dev == ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY_VIVO; |
| |
| if (vivo) { |
| switch (mode) { |
| case ASUS_THROTTLE_THERMAL_POLICY_DEFAULT: |
| return ASUS_THROTTLE_THERMAL_POLICY_DEFAULT_VIVO; |
| case ASUS_THROTTLE_THERMAL_POLICY_OVERBOOST: |
| return ASUS_THROTTLE_THERMAL_POLICY_OVERBOOST_VIVO; |
| case ASUS_THROTTLE_THERMAL_POLICY_SILENT: |
| return ASUS_THROTTLE_THERMAL_POLICY_SILENT_VIVO; |
| } |
| } |
| |
| return mode; |
| } |
| |
| static int asus_wmi_platform_profile_mode_from_vivo(struct asus_wmi *asus, int mode) |
| { |
| bool vivo; |
| |
| vivo = asus->throttle_thermal_policy_dev == ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY_VIVO; |
| |
| if (vivo) { |
| switch (mode) { |
| case ASUS_THROTTLE_THERMAL_POLICY_DEFAULT_VIVO: |
| return ASUS_THROTTLE_THERMAL_POLICY_DEFAULT; |
| case ASUS_THROTTLE_THERMAL_POLICY_OVERBOOST_VIVO: |
| return ASUS_THROTTLE_THERMAL_POLICY_OVERBOOST; |
| case ASUS_THROTTLE_THERMAL_POLICY_SILENT_VIVO: |
| return ASUS_THROTTLE_THERMAL_POLICY_SILENT; |
| } |
| } |
| |
| return mode; |
| } |
| |
| static int asus_wmi_platform_profile_get(struct platform_profile_handler *pprof, |
| enum platform_profile_option *profile) |
| { |
| struct asus_wmi *asus; |
| int tp; |
| |
| asus = container_of(pprof, struct asus_wmi, platform_profile_handler); |
| tp = asus->throttle_thermal_policy_mode; |
| |
| switch (asus_wmi_platform_profile_mode_from_vivo(asus, tp)) { |
| case ASUS_THROTTLE_THERMAL_POLICY_DEFAULT: |
| *profile = PLATFORM_PROFILE_BALANCED; |
| break; |
| case ASUS_THROTTLE_THERMAL_POLICY_OVERBOOST: |
| *profile = PLATFORM_PROFILE_PERFORMANCE; |
| break; |
| case ASUS_THROTTLE_THERMAL_POLICY_SILENT: |
| *profile = PLATFORM_PROFILE_QUIET; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int asus_wmi_platform_profile_set(struct platform_profile_handler *pprof, |
| enum platform_profile_option profile) |
| { |
| struct asus_wmi *asus; |
| int tp; |
| |
| asus = container_of(pprof, struct asus_wmi, platform_profile_handler); |
| |
| switch (profile) { |
| case PLATFORM_PROFILE_PERFORMANCE: |
| tp = ASUS_THROTTLE_THERMAL_POLICY_OVERBOOST; |
| break; |
| case PLATFORM_PROFILE_BALANCED: |
| tp = ASUS_THROTTLE_THERMAL_POLICY_DEFAULT; |
| break; |
| case PLATFORM_PROFILE_QUIET: |
| tp = ASUS_THROTTLE_THERMAL_POLICY_SILENT; |
| break; |
| default: |
| return -EOPNOTSUPP; |
| } |
| |
| asus->throttle_thermal_policy_mode = asus_wmi_platform_profile_to_vivo(asus, tp); |
| return throttle_thermal_policy_write(asus); |
| } |
| |
| static int platform_profile_setup(struct asus_wmi *asus) |
| { |
| struct device *dev = &asus->platform_device->dev; |
| int err; |
| |
| /* |
| * Not an error if a component platform_profile relies on is unavailable |
| * so early return, skipping the setup of platform_profile. |
| */ |
| if (!asus->throttle_thermal_policy_dev) |
| return 0; |
| |
| /* |
| * We need to set the default thermal profile during probe or otherwise |
| * the system will often remain in silent mode, causing low performance. |
| */ |
| err = throttle_thermal_policy_set_default(asus); |
| if (err < 0) { |
| pr_warn("Failed to set default thermal profile\n"); |
| return err; |
| } |
| |
| dev_info(dev, "Using throttle_thermal_policy for platform_profile support\n"); |
| |
| asus->platform_profile_handler.profile_get = asus_wmi_platform_profile_get; |
| asus->platform_profile_handler.profile_set = asus_wmi_platform_profile_set; |
| |
| set_bit(PLATFORM_PROFILE_QUIET, asus->platform_profile_handler.choices); |
| set_bit(PLATFORM_PROFILE_BALANCED, |
| asus->platform_profile_handler.choices); |
| set_bit(PLATFORM_PROFILE_PERFORMANCE, |
| asus->platform_profile_handler.choices); |
| |
| err = platform_profile_register(&asus->platform_profile_handler); |
| if (err == -EEXIST) { |
| pr_warn("%s, a platform_profile handler is already registered\n", __func__); |
| return 0; |
| } else if (err) { |
| pr_err("%s, failed at platform_profile_register: %d\n", __func__, err); |
| return err; |
| } |
| |
| asus->platform_profile_support = true; |
| return 0; |
| } |
| |
| /* Backlight ******************************************************************/ |
| |
| static int read_backlight_power(struct asus_wmi *asus) |
| { |
| int ret; |
| |
| if (asus->driver->quirks->store_backlight_power) |
| ret = !asus->driver->panel_power; |
| else |
| ret = asus_wmi_get_devstate_simple(asus, |
| ASUS_WMI_DEVID_BACKLIGHT); |
| |
| if (ret < 0) |
| return ret; |
| |
| return ret ? BACKLIGHT_POWER_ON : BACKLIGHT_POWER_OFF; |
| } |
| |
| static int read_brightness_max(struct asus_wmi *asus) |
| { |
| u32 retval; |
| int err; |
| |
| err = asus_wmi_get_devstate(asus, ASUS_WMI_DEVID_BRIGHTNESS, &retval); |
| if (err < 0) |
| return err; |
| |
| retval = retval & ASUS_WMI_DSTS_MAX_BRIGTH_MASK; |
| retval >>= 8; |
| |
| if (!retval) |
| return -ENODEV; |
| |
| return retval; |
| } |
| |
| static int read_brightness(struct backlight_device *bd) |
| { |
| struct asus_wmi *asus = bl_get_data(bd); |
| u32 retval; |
| int err; |
| |
| err = asus_wmi_get_devstate(asus, ASUS_WMI_DEVID_BRIGHTNESS, &retval); |
| if (err < 0) |
| return err; |
| |
| return retval & ASUS_WMI_DSTS_BRIGHTNESS_MASK; |
| } |
| |
| static u32 get_scalar_command(struct backlight_device *bd) |
| { |
| struct asus_wmi *asus = bl_get_data(bd); |
| u32 ctrl_param = 0; |
| |
| if ((asus->driver->brightness < bd->props.brightness) || |
| bd->props.brightness == bd->props.max_brightness) |
| ctrl_param = 0x00008001; |
| else if ((asus->driver->brightness > bd->props.brightness) || |
| bd->props.brightness == 0) |
| ctrl_param = 0x00008000; |
| |
| asus->driver->brightness = bd->props.brightness; |
| |
| return ctrl_param; |
| } |
| |
| static int update_bl_status(struct backlight_device *bd) |
| { |
| struct asus_wmi *asus = bl_get_data(bd); |
| u32 ctrl_param; |
| int power, err = 0; |
| |
| power = read_backlight_power(asus); |
| if (power != -ENODEV && bd->props.power != power) { |
| ctrl_param = !!(bd->props.power == BACKLIGHT_POWER_ON); |
| err = asus_wmi_set_devstate(ASUS_WMI_DEVID_BACKLIGHT, |
| ctrl_param, NULL); |
| if (asus->driver->quirks->store_backlight_power) |
| asus->driver->panel_power = bd->props.power; |
| |
| /* When using scalar brightness, updating the brightness |
| * will mess with the backlight power */ |
| if (asus->driver->quirks->scalar_panel_brightness) |
| return err; |
| } |
| |
| if (asus->driver->quirks->scalar_panel_brightness) |
| ctrl_param = get_scalar_command(bd); |
| else |
| ctrl_param = bd->props.brightness; |
| |
| err = asus_wmi_set_devstate(ASUS_WMI_DEVID_BRIGHTNESS, |
| ctrl_param, NULL); |
| |
| return err; |
| } |
| |
| static const struct backlight_ops asus_wmi_bl_ops = { |
| .get_brightness = read_brightness, |
| .update_status = update_bl_status, |
| }; |
| |
| static int asus_wmi_backlight_notify(struct asus_wmi *asus, int code) |
| { |
| struct backlight_device *bd = asus->backlight_device; |
| int old = bd->props.brightness; |
| int new = old; |
| |
| if (code >= NOTIFY_BRNUP_MIN && code <= NOTIFY_BRNUP_MAX) |
| new = code - NOTIFY_BRNUP_MIN + 1; |
| else if (code >= NOTIFY_BRNDOWN_MIN && code <= NOTIFY_BRNDOWN_MAX) |
| new = code - NOTIFY_BRNDOWN_MIN; |
| |
| bd->props.brightness = new; |
| backlight_update_status(bd); |
| backlight_force_update(bd, BACKLIGHT_UPDATE_HOTKEY); |
| |
| return old; |
| } |
| |
| static int asus_wmi_backlight_init(struct asus_wmi *asus) |
| { |
| struct backlight_device *bd; |
| struct backlight_properties props; |
| int max; |
| int power; |
| |
| max = read_brightness_max(asus); |
| if (max < 0) |
| return max; |
| |
| power = read_backlight_power(asus); |
| if (power == -ENODEV) |
| power = BACKLIGHT_POWER_ON; |
| else if (power < 0) |
| return power; |
| |
| memset(&props, 0, sizeof(struct backlight_properties)); |
| props.type = BACKLIGHT_PLATFORM; |
| props.max_brightness = max; |
| bd = backlight_device_register(asus->driver->name, |
| &asus->platform_device->dev, asus, |
| &asus_wmi_bl_ops, &props); |
| if (IS_ERR(bd)) { |
| pr_err("Could not register backlight device\n"); |
| return PTR_ERR(bd); |
| } |
| |
| asus->backlight_device = bd; |
| |
| if (asus->driver->quirks->store_backlight_power) |
| asus->driver->panel_power = power; |
| |
| bd->props.brightness = read_brightness(bd); |
| bd->props.power = power; |
| backlight_update_status(bd); |
| |
| asus->driver->brightness = bd->props.brightness; |
| |
| return 0; |
| } |
| |
| static void asus_wmi_backlight_exit(struct asus_wmi *asus) |
| { |
| backlight_device_unregister(asus->backlight_device); |
| |
| asus->backlight_device = NULL; |
| } |
| |
| static int is_display_toggle(int code) |
| { |
| /* display toggle keys */ |
| if ((code >= 0x61 && code <= 0x67) || |
| (code >= 0x8c && code <= 0x93) || |
| (code >= 0xa0 && code <= 0xa7) || |
| (code >= 0xd0 && code <= 0xd5)) |
| return 1; |
| |
| return 0; |
| } |
| |
| /* Screenpad backlight *******************************************************/ |
| |
| static int read_screenpad_backlight_power(struct asus_wmi *asus) |
| { |
| int ret; |
| |
| ret = asus_wmi_get_devstate_simple(asus, ASUS_WMI_DEVID_SCREENPAD_POWER); |
| if (ret < 0) |
| return ret; |
| /* 1 == powered */ |
| return ret ? BACKLIGHT_POWER_ON : BACKLIGHT_POWER_OFF; |
| } |
| |
| static int read_screenpad_brightness(struct backlight_device *bd) |
| { |
| struct asus_wmi *asus = bl_get_data(bd); |
| u32 retval; |
| int err; |
| |
| err = read_screenpad_backlight_power(asus); |
| if (err < 0) |
| return err; |
| /* The device brightness can only be read if powered, so return stored */ |
| if (err == BACKLIGHT_POWER_OFF) |
| return asus->driver->screenpad_brightness - ASUS_SCREENPAD_BRIGHT_MIN; |
| |
| err = asus_wmi_get_devstate(asus, ASUS_WMI_DEVID_SCREENPAD_LIGHT, &retval); |
| if (err < 0) |
| return err; |
| |
| return (retval & ASUS_WMI_DSTS_BRIGHTNESS_MASK) - ASUS_SCREENPAD_BRIGHT_MIN; |
| } |
| |
| static int update_screenpad_bl_status(struct backlight_device *bd) |
| { |
| struct asus_wmi *asus = bl_get_data(bd); |
| int power, err = 0; |
| u32 ctrl_param; |
| |
| power = read_screenpad_backlight_power(asus); |
| if (power < 0) |
| return power; |
| |
| if (bd->props.power != power) { |
| if (power != BACKLIGHT_POWER_ON) { |
| /* Only brightness > 0 can power it back on */ |
| ctrl_param = asus->driver->screenpad_brightness - ASUS_SCREENPAD_BRIGHT_MIN; |
| err = asus_wmi_set_devstate(ASUS_WMI_DEVID_SCREENPAD_LIGHT, |
| ctrl_param, NULL); |
| } else { |
| err = asus_wmi_set_devstate(ASUS_WMI_DEVID_SCREENPAD_POWER, 0, NULL); |
| } |
| } else if (power == BACKLIGHT_POWER_ON) { |
| /* Only set brightness if powered on or we get invalid/unsync state */ |
| ctrl_param = bd->props.brightness + ASUS_SCREENPAD_BRIGHT_MIN; |
| err = asus_wmi_set_devstate(ASUS_WMI_DEVID_SCREENPAD_LIGHT, ctrl_param, NULL); |
| } |
| |
| /* Ensure brightness is stored to turn back on with */ |
| if (err == 0) |
| asus->driver->screenpad_brightness = bd->props.brightness + ASUS_SCREENPAD_BRIGHT_MIN; |
| |
| return err; |
| } |
| |
| static const struct backlight_ops asus_screenpad_bl_ops = { |
| .get_brightness = read_screenpad_brightness, |
| .update_status = update_screenpad_bl_status, |
| .options = BL_CORE_SUSPENDRESUME, |
| }; |
| |
| static int asus_screenpad_init(struct asus_wmi *asus) |
| { |
| struct backlight_device *bd; |
| struct backlight_properties props; |
| int err, power; |
| int brightness = 0; |
| |
| power = read_screenpad_backlight_power(asus); |
| if (power < 0) |
| return power; |
| |
| if (power != BACKLIGHT_POWER_OFF) { |
| err = asus_wmi_get_devstate(asus, ASUS_WMI_DEVID_SCREENPAD_LIGHT, &brightness); |
| if (err < 0) |
| return err; |
| } |
| /* default to an acceptable min brightness on boot if too low */ |
| if (brightness < ASUS_SCREENPAD_BRIGHT_MIN) |
| brightness = ASUS_SCREENPAD_BRIGHT_DEFAULT; |
| |
| memset(&props, 0, sizeof(struct backlight_properties)); |
| props.type = BACKLIGHT_RAW; /* ensure this bd is last to be picked */ |
| props.max_brightness = ASUS_SCREENPAD_BRIGHT_MAX - ASUS_SCREENPAD_BRIGHT_MIN; |
| bd = backlight_device_register("asus_screenpad", |
| &asus->platform_device->dev, asus, |
| &asus_screenpad_bl_ops, &props); |
| if (IS_ERR(bd)) { |
| pr_err("Could not register backlight device\n"); |
| return PTR_ERR(bd); |
| } |
| |
| asus->screenpad_backlight_device = bd; |
| asus->driver->screenpad_brightness = brightness; |
| bd->props.brightness = brightness - ASUS_SCREENPAD_BRIGHT_MIN; |
| bd->props.power = power; |
| backlight_update_status(bd); |
| |
| return 0; |
| } |
| |
| static void asus_screenpad_exit(struct asus_wmi *asus) |
| { |
| backlight_device_unregister(asus->screenpad_backlight_device); |
| |
| asus->screenpad_backlight_device = NULL; |
| } |
| |
| /* Fn-lock ********************************************************************/ |
| |
| static bool asus_wmi_has_fnlock_key(struct asus_wmi *asus) |
| { |
| u32 result; |
| |
| asus_wmi_get_devstate(asus, ASUS_WMI_DEVID_FNLOCK, &result); |
| |
| return (result & ASUS_WMI_DSTS_PRESENCE_BIT) && |
| !(result & ASUS_WMI_FNLOCK_BIOS_DISABLED); |
| } |
| |
| static void asus_wmi_fnlock_update(struct asus_wmi *asus) |
| { |
| int mode = asus->fnlock_locked; |
| |
| asus_wmi_set_devstate(ASUS_WMI_DEVID_FNLOCK, mode, NULL); |
| } |
| |
| /* WMI events *****************************************************************/ |
| |
| static int asus_wmi_get_event_code(union acpi_object *obj) |
| { |
| int code; |
| |
| if (obj && obj->type == ACPI_TYPE_INTEGER) |
| code = (int)(obj->integer.value & WMI_EVENT_MASK); |
| else |
| code = -EIO; |
| |
| return code; |
| } |
| |
| static void asus_wmi_handle_event_code(int code, struct asus_wmi *asus) |
| { |
| unsigned int key_value = 1; |
| bool autorelease = 1; |
| |
| if (asus->driver->key_filter) { |
| asus->driver->key_filter(asus->driver, &code, &key_value, |
| &autorelease); |
| if (code == ASUS_WMI_KEY_IGNORE) |
| return; |
| } |
| |
| if (acpi_video_get_backlight_type() == acpi_backlight_vendor && |
| code >= NOTIFY_BRNUP_MIN && code <= NOTIFY_BRNDOWN_MAX) { |
| asus_wmi_backlight_notify(asus, code); |
| return; |
| } |
| |
| if (code == NOTIFY_KBD_BRTUP) { |
| kbd_led_set_by_kbd(asus, asus->kbd_led_wk + 1); |
| return; |
| } |
| if (code == NOTIFY_KBD_BRTDWN) { |
| kbd_led_set_by_kbd(asus, asus->kbd_led_wk - 1); |
| return; |
| } |
| if (code == NOTIFY_KBD_BRTTOGGLE) { |
| if (asus->kbd_led_wk == asus->kbd_led.max_brightness) |
| kbd_led_set_by_kbd(asus, 0); |
| else |
| kbd_led_set_by_kbd(asus, asus->kbd_led_wk + 1); |
| return; |
| } |
| |
| if (code == NOTIFY_FNLOCK_TOGGLE) { |
| asus->fnlock_locked = !asus->fnlock_locked; |
| asus_wmi_fnlock_update(asus); |
| return; |
| } |
| |
| if (code == asus->tablet_switch_event_code) { |
| asus_wmi_tablet_mode_get_state(asus); |
| return; |
| } |
| |
| if (code == NOTIFY_KBD_FBM || code == NOTIFY_KBD_TTP) { |
| if (asus->fan_boost_mode_available) |
| fan_boost_mode_switch_next(asus); |
| if (asus->throttle_thermal_policy_dev) |
| throttle_thermal_policy_switch_next(asus); |
| return; |
| |
| } |
| |
| if (is_display_toggle(code) && asus->driver->quirks->no_display_toggle) |
| return; |
| |
| if (!sparse_keymap_report_event(asus->inputdev, code, |
| key_value, autorelease)) |
| pr_info("Unknown key code 0x%x\n", code); |
| } |
| |
| static void asus_wmi_notify(union acpi_object *obj, void *context) |
| { |
| struct asus_wmi *asus = context; |
| int code = asus_wmi_get_event_code(obj); |
| |
| if (code < 0) { |
| pr_warn("Failed to get notify code: %d\n", code); |
| return; |
| } |
| |
| asus_wmi_handle_event_code(code, asus); |
| } |
| |
| /* Sysfs **********************************************************************/ |
| |
| static ssize_t store_sys_wmi(struct asus_wmi *asus, int devid, |
| const char *buf, size_t count) |
| { |
| u32 retval; |
| int err, value; |
| |
| value = asus_wmi_get_devstate_simple(asus, devid); |
| if (value < 0) |
| return value; |
| |
| err = kstrtoint(buf, 0, &value); |
| if (err) |
| return err; |
| |
| err = asus_wmi_set_devstate(devid, value, &retval); |
| if (err < 0) |
| return err; |
| |
| return count; |
| } |
| |
| static ssize_t show_sys_wmi(struct asus_wmi *asus, int devid, char *buf) |
| { |
| int value = asus_wmi_get_devstate_simple(asus, devid); |
| |
| if (value < 0) |
| return value; |
| |
| return sysfs_emit(buf, "%d\n", value); |
| } |
| |
| #define ASUS_WMI_CREATE_DEVICE_ATTR(_name, _mode, _cm) \ |
| static ssize_t show_##_name(struct device *dev, \ |
| struct device_attribute *attr, \ |
| char *buf) \ |
| { \ |
| struct asus_wmi *asus = dev_get_drvdata(dev); \ |
| \ |
| return show_sys_wmi(asus, _cm, buf); \ |
| } \ |
| static ssize_t store_##_name(struct device *dev, \ |
| struct device_attribute *attr, \ |
| const char *buf, size_t count) \ |
| { \ |
| struct asus_wmi *asus = dev_get_drvdata(dev); \ |
| \ |
| return store_sys_wmi(asus, _cm, buf, count); \ |
| } \ |
| static struct device_attribute dev_attr_##_name = { \ |
| .attr = { \ |
| .name = __stringify(_name), \ |
| .mode = _mode }, \ |
| .show = show_##_name, \ |
| .store = store_##_name, \ |
| } |
| |
| ASUS_WMI_CREATE_DEVICE_ATTR(touchpad, 0644, ASUS_WMI_DEVID_TOUCHPAD); |
| ASUS_WMI_CREATE_DEVICE_ATTR(camera, 0644, ASUS_WMI_DEVID_CAMERA); |
| ASUS_WMI_CREATE_DEVICE_ATTR(cardr, 0644, ASUS_WMI_DEVID_CARDREADER); |
| ASUS_WMI_CREATE_DEVICE_ATTR(lid_resume, 0644, ASUS_WMI_DEVID_LID_RESUME); |
| ASUS_WMI_CREATE_DEVICE_ATTR(als_enable, 0644, ASUS_WMI_DEVID_ALS_ENABLE); |
| |
| static ssize_t cpufv_store(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| int value, rv; |
| |
| rv = kstrtoint(buf, 0, &value); |
| if (rv) |
| return rv; |
| |
| if (value < 0 || value > 2) |
| return -EINVAL; |
| |
| rv = asus_wmi_evaluate_method(ASUS_WMI_METHODID_CFVS, value, 0, NULL); |
| if (rv < 0) |
| return rv; |
| |
| return count; |
| } |
| |
| static DEVICE_ATTR_WO(cpufv); |
| |
| static struct attribute *platform_attributes[] = { |
| &dev_attr_cpufv.attr, |
| &dev_attr_camera.attr, |
| &dev_attr_cardr.attr, |
| &dev_attr_touchpad.attr, |
| &dev_attr_charge_mode.attr, |
| &dev_attr_egpu_enable.attr, |
| &dev_attr_egpu_connected.attr, |
| &dev_attr_dgpu_disable.attr, |
| &dev_attr_gpu_mux_mode.attr, |
| &dev_attr_lid_resume.attr, |
| &dev_attr_als_enable.attr, |
| &dev_attr_fan_boost_mode.attr, |
| &dev_attr_throttle_thermal_policy.attr, |
| &dev_attr_ppt_pl2_sppt.attr, |
| &dev_attr_ppt_pl1_spl.attr, |
| &dev_attr_ppt_fppt.attr, |
| &dev_attr_ppt_apu_sppt.attr, |
| &dev_attr_ppt_platform_sppt.attr, |
| &dev_attr_nv_dynamic_boost.attr, |
| &dev_attr_nv_temp_target.attr, |
| &dev_attr_mcu_powersave.attr, |
| &dev_attr_boot_sound.attr, |
| &dev_attr_panel_od.attr, |
| &dev_attr_mini_led_mode.attr, |
| &dev_attr_available_mini_led_mode.attr, |
| NULL |
| }; |
| |
| static umode_t asus_sysfs_is_visible(struct kobject *kobj, |
| struct attribute *attr, int idx) |
| { |
| struct device *dev = kobj_to_dev(kobj); |
| struct asus_wmi *asus = dev_get_drvdata(dev); |
| bool ok = true; |
| int devid = -1; |
| |
| if (attr == &dev_attr_camera.attr) |
| devid = ASUS_WMI_DEVID_CAMERA; |
| else if (attr == &dev_attr_cardr.attr) |
| devid = ASUS_WMI_DEVID_CARDREADER; |
| else if (attr == &dev_attr_touchpad.attr) |
| devid = ASUS_WMI_DEVID_TOUCHPAD; |
| else if (attr == &dev_attr_lid_resume.attr) |
| devid = ASUS_WMI_DEVID_LID_RESUME; |
| else if (attr == &dev_attr_als_enable.attr) |
| devid = ASUS_WMI_DEVID_ALS_ENABLE; |
| else if (attr == &dev_attr_charge_mode.attr) |
| devid = ASUS_WMI_DEVID_CHARGE_MODE; |
| else if (attr == &dev_attr_egpu_enable.attr) |
| ok = asus->egpu_enable_available; |
| else if (attr == &dev_attr_egpu_connected.attr) |
| devid = ASUS_WMI_DEVID_EGPU_CONNECTED; |
| else if (attr == &dev_attr_dgpu_disable.attr) |
| ok = asus->dgpu_disable_available; |
| else if (attr == &dev_attr_gpu_mux_mode.attr) |
| ok = asus->gpu_mux_dev != 0; |
| else if (attr == &dev_attr_fan_boost_mode.attr) |
| ok = asus->fan_boost_mode_available; |
| else if (attr == &dev_attr_throttle_thermal_policy.attr) |
| ok = asus->throttle_thermal_policy_dev != 0; |
| else if (attr == &dev_attr_ppt_pl2_sppt.attr) |
| devid = ASUS_WMI_DEVID_PPT_PL2_SPPT; |
| else if (attr == &dev_attr_ppt_pl1_spl.attr) |
| devid = ASUS_WMI_DEVID_PPT_PL1_SPL; |
| else if (attr == &dev_attr_ppt_fppt.attr) |
| devid = ASUS_WMI_DEVID_PPT_FPPT; |
| else if (attr == &dev_attr_ppt_apu_sppt.attr) |
| devid = ASUS_WMI_DEVID_PPT_APU_SPPT; |
| else if (attr == &dev_attr_ppt_platform_sppt.attr) |
| devid = ASUS_WMI_DEVID_PPT_PLAT_SPPT; |
| else if (attr == &dev_attr_nv_dynamic_boost.attr) |
| devid = ASUS_WMI_DEVID_NV_DYN_BOOST; |
| else if (attr == &dev_attr_nv_temp_target.attr) |
| devid = ASUS_WMI_DEVID_NV_THERM_TARGET; |
| else if (attr == &dev_attr_mcu_powersave.attr) |
| devid = ASUS_WMI_DEVID_MCU_POWERSAVE; |
| else if (attr == &dev_attr_boot_sound.attr) |
| devid = ASUS_WMI_DEVID_BOOT_SOUND; |
| else if (attr == &dev_attr_panel_od.attr) |
| devid = ASUS_WMI_DEVID_PANEL_OD; |
| else if (attr == &dev_attr_mini_led_mode.attr) |
| ok = asus->mini_led_dev_id != 0; |
| else if (attr == &dev_attr_available_mini_led_mode.attr) |
| ok = asus->mini_led_dev_id != 0; |
| |
| if (devid != -1) { |
| ok = !(asus_wmi_get_devstate_simple(asus, devid) < 0); |
| pr_debug("%s called 0x%08x, ok: %x\n", __func__, devid, ok); |
| } |
| |
| return ok ? attr->mode : 0; |
| } |
| |
| static const struct attribute_group platform_attribute_group = { |
| .is_visible = asus_sysfs_is_visible, |
| .attrs = platform_attributes |
| }; |
| |
| static void asus_wmi_sysfs_exit(struct platform_device *device) |
| { |
| sysfs_remove_group(&device->dev.kobj, &platform_attribute_group); |
| } |
| |
| static int asus_wmi_sysfs_init(struct platform_device *device) |
| { |
| return sysfs_create_group(&device->dev.kobj, &platform_attribute_group); |
| } |
| |
| /* Platform device ************************************************************/ |
| |
| static int asus_wmi_platform_init(struct asus_wmi *asus) |
| { |
| struct device *dev = &asus->platform_device->dev; |
| char *wmi_uid; |
| int rv; |
| |
| /* INIT enable hotkeys on some models */ |
| if (!asus_wmi_evaluate_method(ASUS_WMI_METHODID_INIT, 0, 0, &rv)) |
| pr_info("Initialization: %#x\n", rv); |
| |
| /* We don't know yet what to do with this version... */ |
| if (!asus_wmi_evaluate_method(ASUS_WMI_METHODID_SPEC, 0, 0x9, &rv)) { |
| pr_info("BIOS WMI version: %d.%d\n", rv >> 16, rv & 0xFF); |
| asus->spec = rv; |
| } |
| |
| /* |
| * The SFUN method probably allows the original driver to get the list |
| * of features supported by a given model. For now, 0x0100 or 0x0800 |
| * bit signifies that the laptop is equipped with a Wi-Fi MiniPCI card. |
| * The significance of others is yet to be found. |
| */ |
| if (!asus_wmi_evaluate_method(ASUS_WMI_METHODID_SFUN, 0, 0, &rv)) { |
| pr_info("SFUN value: %#x\n", rv); |
| asus->sfun = rv; |
| } |
| |
| /* |
| * Eee PC and Notebooks seems to have different method_id for DSTS, |
| * but it may also be related to the BIOS's SPEC. |
| * Note, on most Eeepc, there is no way to check if a method exist |
| * or note, while on notebooks, they returns 0xFFFFFFFE on failure, |
| * but once again, SPEC may probably be used for that kind of things. |
| * |
| * Additionally at least TUF Gaming series laptops return nothing for |
| * unknown methods, so the detection in this way is not possible. |
| * |
| * There is strong indication that only ACPI WMI devices that have _UID |
| * equal to "ASUSWMI" use DCTS whereas those with "ATK" use DSTS. |
| */ |
| wmi_uid = wmi_get_acpi_device_uid(ASUS_WMI_MGMT_GUID); |
| if (!wmi_uid) |
| return -ENODEV; |
| |
| if (!strcmp(wmi_uid, ASUS_ACPI_UID_ASUSWMI)) { |
| dev_info(dev, "Detected ASUSWMI, use DCTS\n"); |
| asus->dsts_id = ASUS_WMI_METHODID_DCTS; |
| } else { |
| dev_info(dev, "Detected %s, not ASUSWMI, use DSTS\n", wmi_uid); |
| asus->dsts_id = ASUS_WMI_METHODID_DSTS; |
| } |
| |
| /* CWAP allow to define the behavior of the Fn+F2 key, |
| * this method doesn't seems to be present on Eee PCs */ |
| if (asus->driver->quirks->wapf >= 0) |
| asus_wmi_set_devstate(ASUS_WMI_DEVID_CWAP, |
| asus->driver->quirks->wapf, NULL); |
| |
| return 0; |
| } |
| |
| /* debugfs ********************************************************************/ |
| |
| struct asus_wmi_debugfs_node { |
| struct asus_wmi *asus; |
| char *name; |
| int (*show) (struct seq_file *m, void *data); |
| }; |
| |
| static int show_dsts(struct seq_file *m, void *data) |
| { |
| struct asus_wmi *asus = m->private; |
| int err; |
| u32 retval = -1; |
| |
| err = asus_wmi_get_devstate(asus, asus->debug.dev_id, &retval); |
| if (err < 0) |
| return err; |
| |
| seq_printf(m, "DSTS(%#x) = %#x\n", asus->debug.dev_id, retval); |
| |
| return 0; |
| } |
| |
| static int show_devs(struct seq_file *m, void *data) |
| { |
| struct asus_wmi *asus = m->private; |
| int err; |
| u32 retval = -1; |
| |
| err = asus_wmi_set_devstate(asus->debug.dev_id, asus->debug.ctrl_param, |
| &retval); |
| if (err < 0) |
| return err; |
| |
| seq_printf(m, "DEVS(%#x, %#x) = %#x\n", asus->debug.dev_id, |
| asus->debug.ctrl_param, retval); |
| |
| return 0; |
| } |
| |
| static int show_call(struct seq_file *m, void *data) |
| { |
| struct asus_wmi *asus = m->private; |
| struct bios_args args = { |
| .arg0 = asus->debug.dev_id, |
| .arg1 = asus->debug.ctrl_param, |
| }; |
| struct acpi_buffer input = { (acpi_size) sizeof(args), &args }; |
| struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL }; |
| union acpi_object *obj; |
| acpi_status status; |
| |
| status = wmi_evaluate_method(ASUS_WMI_MGMT_GUID, |
| 0, asus->debug.method_id, |
| &input, &output); |
| |
| if (ACPI_FAILURE(status)) |
| return -EIO; |
| |
| obj = (union acpi_object *)output.pointer; |
| if (obj && obj->type == ACPI_TYPE_INTEGER) |
| seq_printf(m, "%#x(%#x, %#x) = %#x\n", asus->debug.method_id, |
| asus->debug.dev_id, asus->debug.ctrl_param, |
| (u32) obj->integer.value); |
| else |
| seq_printf(m, "%#x(%#x, %#x) = t:%d\n", asus->debug.method_id, |
| asus->debug.dev_id, asus->debug.ctrl_param, |
| obj ? obj->type : -1); |
| |
| kfree(obj); |
| |
| return 0; |
| } |
| |
| static struct asus_wmi_debugfs_node asus_wmi_debug_files[] = { |
| {NULL, "devs", show_devs}, |
| {NULL, "dsts", show_dsts}, |
| {NULL, "call", show_call}, |
| }; |
| |
| static int asus_wmi_debugfs_open(struct inode *inode, struct file *file) |
| { |
| struct asus_wmi_debugfs_node *node = inode->i_private; |
| |
| return single_open(file, node->show, node->asus); |
| } |
| |
| static const struct file_operations asus_wmi_debugfs_io_ops = { |
| .owner = THIS_MODULE, |
| .open = asus_wmi_debugfs_open, |
| .read = seq_read, |
| .llseek = seq_lseek, |
| .release = single_release, |
| }; |
| |
| static void asus_wmi_debugfs_exit(struct asus_wmi *asus) |
| { |
| debugfs_remove_recursive(asus->debug.root); |
| } |
| |
| static void asus_wmi_debugfs_init(struct asus_wmi *asus) |
| { |
| int i; |
| |
| asus->debug.root = debugfs_create_dir(asus->driver->name, NULL); |
| |
| debugfs_create_x32("method_id", S_IRUGO | S_IWUSR, asus->debug.root, |
| &asus->debug.method_id); |
| |
| debugfs_create_x32("dev_id", S_IRUGO | S_IWUSR, asus->debug.root, |
| &asus->debug.dev_id); |
| |
| debugfs_create_x32("ctrl_param", S_IRUGO | S_IWUSR, asus->debug.root, |
| &asus->debug.ctrl_param); |
| |
| for (i = 0; i < ARRAY_SIZE(asus_wmi_debug_files); i++) { |
| struct asus_wmi_debugfs_node *node = &asus_wmi_debug_files[i]; |
| |
| node->asus = asus; |
| debugfs_create_file(node->name, S_IFREG | S_IRUGO, |
| asus->debug.root, node, |
| &asus_wmi_debugfs_io_ops); |
| } |
| } |
| |
| /* Init / exit ****************************************************************/ |
| |
| static int asus_wmi_add(struct platform_device *pdev) |
| { |
| struct platform_driver *pdrv = to_platform_driver(pdev->dev.driver); |
| struct asus_wmi_driver *wdrv = to_asus_wmi_driver(pdrv); |
| struct asus_wmi *asus; |
| acpi_status status; |
| int err; |
| u32 result; |
| |
| asus = kzalloc(sizeof(struct asus_wmi), GFP_KERNEL); |
| if (!asus) |
| return -ENOMEM; |
| |
| asus->driver = wdrv; |
| asus->platform_device = pdev; |
| wdrv->platform_device = pdev; |
| platform_set_drvdata(asus->platform_device, asus); |
| |
| if (wdrv->detect_quirks) |
| wdrv->detect_quirks(asus->driver); |
| |
| err = asus_wmi_platform_init(asus); |
| if (err) |
| goto fail_platform; |
| |
| /* ensure defaults for tunables */ |
| asus->ppt_pl2_sppt = 5; |
| asus->ppt_pl1_spl = 5; |
| asus->ppt_apu_sppt = 5; |
| asus->ppt_platform_sppt = 5; |
| asus->ppt_fppt = 5; |
| asus->nv_dynamic_boost = 5; |
| asus->nv_temp_target = 75; |
| |
| asus->egpu_enable_available = asus_wmi_dev_is_present(asus, ASUS_WMI_DEVID_EGPU); |
| asus->dgpu_disable_available = asus_wmi_dev_is_present(asus, ASUS_WMI_DEVID_DGPU); |
| asus->kbd_rgb_state_available = asus_wmi_dev_is_present(asus, ASUS_WMI_DEVID_TUF_RGB_STATE); |
| asus->ally_mcu_usb_switch = acpi_has_method(NULL, ASUS_USB0_PWR_EC0_CSEE) |
| && dmi_check_system(asus_ally_mcu_quirk); |
| |
| if (asus_wmi_dev_is_present(asus, ASUS_WMI_DEVID_MINI_LED_MODE)) |
| asus->mini_led_dev_id = ASUS_WMI_DEVID_MINI_LED_MODE; |
| else if (asus_wmi_dev_is_present(asus, ASUS_WMI_DEVID_MINI_LED_MODE2)) |
| asus->mini_led_dev_id = ASUS_WMI_DEVID_MINI_LED_MODE2; |
| |
| if (asus_wmi_dev_is_present(asus, ASUS_WMI_DEVID_GPU_MUX)) |
| asus->gpu_mux_dev = ASUS_WMI_DEVID_GPU_MUX; |
| else if (asus_wmi_dev_is_present(asus, ASUS_WMI_DEVID_GPU_MUX_VIVO)) |
| asus->gpu_mux_dev = ASUS_WMI_DEVID_GPU_MUX_VIVO; |
| |
| if (asus_wmi_dev_is_present(asus, ASUS_WMI_DEVID_TUF_RGB_MODE)) |
| asus->kbd_rgb_dev = ASUS_WMI_DEVID_TUF_RGB_MODE; |
| else if (asus_wmi_dev_is_present(asus, ASUS_WMI_DEVID_TUF_RGB_MODE2)) |
| asus->kbd_rgb_dev = ASUS_WMI_DEVID_TUF_RGB_MODE2; |
| |
| if (asus_wmi_dev_is_present(asus, ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY)) |
| asus->throttle_thermal_policy_dev = ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY; |
| else if (asus_wmi_dev_is_present(asus, ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY_VIVO)) |
| asus->throttle_thermal_policy_dev = ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY_VIVO; |
| |
| err = fan_boost_mode_check_present(asus); |
| if (err) |
| goto fail_fan_boost_mode; |
| |
| err = platform_profile_setup(asus); |
| if (err) |
| goto fail_platform_profile_setup; |
| |
| err = asus_wmi_sysfs_init(asus->platform_device); |
| if (err) |
| goto fail_sysfs; |
| |
| err = asus_wmi_input_init(asus); |
| if (err) |
| goto fail_input; |
| |
| err = asus_wmi_fan_init(asus); /* probably no problems on error */ |
| |
| err = asus_wmi_hwmon_init(asus); |
| if (err) |
| goto fail_hwmon; |
| |
| err = asus_wmi_custom_fan_curve_init(asus); |
| if (err) |
| goto fail_custom_fan_curve; |
| |
| err = asus_wmi_led_init(asus); |
| if (err) |
| goto fail_leds; |
| |
| asus_wmi_get_devstate(asus, ASUS_WMI_DEVID_WLAN, &result); |
| if (result & (ASUS_WMI_DSTS_PRESENCE_BIT | ASUS_WMI_DSTS_USER_BIT)) |
| asus->driver->wlan_ctrl_by_user = 1; |
| |
| if (!(asus->driver->wlan_ctrl_by_user && ashs_present())) { |
| err = asus_wmi_rfkill_init(asus); |
| if (err) |
| goto fail_rfkill; |
| } |
| |
| if (asus->driver->quirks->wmi_force_als_set) |
| asus_wmi_set_als(); |
| |
| if (asus->driver->quirks->xusb2pr) |
| asus_wmi_set_xusb2pr(asus); |
| |
| if (acpi_video_get_backlight_type() == acpi_backlight_vendor) { |
| err = asus_wmi_backlight_init(asus); |
| if (err && err != -ENODEV) |
| goto fail_backlight; |
| } else if (asus->driver->quirks->wmi_backlight_set_devstate) |
| err = asus_wmi_set_devstate(ASUS_WMI_DEVID_BACKLIGHT, 2, NULL); |
| |
| if (asus_wmi_dev_is_present(asus, ASUS_WMI_DEVID_SCREENPAD_LIGHT)) { |
| err = asus_screenpad_init(asus); |
| if (err && err != -ENODEV) |
| goto fail_screenpad; |
| } |
| |
| if (asus_wmi_has_fnlock_key(asus)) { |
| asus->fnlock_locked = fnlock_default; |
| asus_wmi_fnlock_update(asus); |
| } |
| |
| status = wmi_install_notify_handler(asus->driver->event_guid, |
| asus_wmi_notify, asus); |
| if (ACPI_FAILURE(status)) { |
| pr_err("Unable to register notify handler - %d\n", status); |
| err = -ENODEV; |
| goto fail_wmi_handler; |
| } |
| |
| if (asus->driver->i8042_filter) { |
| err = i8042_install_filter(asus->driver->i8042_filter); |
| if (err) |
| pr_warn("Unable to install key filter - %d\n", err); |
| } |
| |
| asus_wmi_battery_init(asus); |
| |
| asus_wmi_debugfs_init(asus); |
| |
| return 0; |
| |
| fail_wmi_handler: |
| asus_wmi_backlight_exit(asus); |
| fail_backlight: |
| asus_wmi_rfkill_exit(asus); |
| fail_screenpad: |
| asus_screenpad_exit(asus); |
| fail_rfkill: |
| asus_wmi_led_exit(asus); |
| fail_leds: |
| fail_hwmon: |
| asus_wmi_input_exit(asus); |
| fail_input: |
| asus_wmi_sysfs_exit(asus->platform_device); |
| fail_sysfs: |
| fail_custom_fan_curve: |
| fail_platform_profile_setup: |
| if (asus->platform_profile_support) |
| platform_profile_remove(); |
| fail_fan_boost_mode: |
| fail_platform: |
| kfree(asus); |
| return err; |
| } |
| |
| static void asus_wmi_remove(struct platform_device *device) |
| { |
| struct asus_wmi *asus; |
| |
| asus = platform_get_drvdata(device); |
| if (asus->driver->i8042_filter) |
| i8042_remove_filter(asus->driver->i8042_filter); |
| wmi_remove_notify_handler(asus->driver->event_guid); |
| asus_wmi_backlight_exit(asus); |
| asus_screenpad_exit(asus); |
| asus_wmi_input_exit(asus); |
| asus_wmi_led_exit(asus); |
| asus_wmi_rfkill_exit(asus); |
| asus_wmi_debugfs_exit(asus); |
| asus_wmi_sysfs_exit(asus->platform_device); |
| asus_fan_set_auto(asus); |
| throttle_thermal_policy_set_default(asus); |
| asus_wmi_battery_exit(asus); |
| |
| if (asus->platform_profile_support) |
| platform_profile_remove(); |
| |
| kfree(asus); |
| } |
| |
| /* Platform driver - hibernate/resume callbacks *******************************/ |
| |
| static int asus_hotk_thaw(struct device *device) |
| { |
| struct asus_wmi *asus = dev_get_drvdata(device); |
| |
| if (asus->wlan.rfkill) { |
| bool wlan; |
| |
| /* |
| * Work around bios bug - acpi _PTS turns off the wireless led |
| * during suspend. Normally it restores it on resume, but |
| * we should kick it ourselves in case hibernation is aborted. |
| */ |
| wlan = asus_wmi_get_devstate_simple(asus, ASUS_WMI_DEVID_WLAN); |
| asus_wmi_set_devstate(ASUS_WMI_DEVID_WLAN, wlan, NULL); |
| } |
| |
| return 0; |
| } |
| |
| static int asus_hotk_resume(struct device *device) |
| { |
| struct asus_wmi *asus = dev_get_drvdata(device); |
| |
| if (!IS_ERR_OR_NULL(asus->kbd_led.dev)) |
| kbd_led_update(asus); |
| |
| if (asus_wmi_has_fnlock_key(asus)) |
| asus_wmi_fnlock_update(asus); |
| |
| asus_wmi_tablet_mode_get_state(asus); |
| |
| return 0; |
| } |
| |
| static int asus_hotk_resume_early(struct device *device) |
| { |
| struct asus_wmi *asus = dev_get_drvdata(device); |
| |
| if (asus->ally_mcu_usb_switch) { |
| /* sleep required to prevent USB0 being yanked then reappearing rapidly */ |
| if (ACPI_FAILURE(acpi_execute_simple_method(NULL, ASUS_USB0_PWR_EC0_CSEE, 0xB8))) |
| dev_err(device, "ROG Ally MCU failed to connect USB dev\n"); |
| else |
| msleep(ASUS_USB0_PWR_EC0_CSEE_WAIT); |
| } |
| return 0; |
| } |
| |
| static int asus_hotk_prepare(struct device *device) |
| { |
| struct asus_wmi *asus = dev_get_drvdata(device); |
| |
| if (asus->ally_mcu_usb_switch) { |
| /* sleep required to ensure USB0 is disabled before sleep continues */ |
| if (ACPI_FAILURE(acpi_execute_simple_method(NULL, ASUS_USB0_PWR_EC0_CSEE, 0xB7))) |
| dev_err(device, "ROG Ally MCU failed to disconnect USB dev\n"); |
| else |
| msleep(ASUS_USB0_PWR_EC0_CSEE_WAIT); |
| } |
| return 0; |
| } |
| |
| static int asus_hotk_restore(struct device *device) |
| { |
| struct asus_wmi *asus = dev_get_drvdata(device); |
| int bl; |
| |
| /* Refresh both wlan rfkill state and pci hotplug */ |
| if (asus->wlan.rfkill) |
| asus_rfkill_hotplug(asus); |
| |
| if (asus->bluetooth.rfkill) { |
| bl = !asus_wmi_get_devstate_simple(asus, |
| ASUS_WMI_DEVID_BLUETOOTH); |
| rfkill_set_sw_state(asus->bluetooth.rfkill, bl); |
| } |
| if (asus->wimax.rfkill) { |
| bl = !asus_wmi_get_devstate_simple(asus, ASUS_WMI_DEVID_WIMAX); |
| rfkill_set_sw_state(asus->wimax.rfkill, bl); |
| } |
| if (asus->wwan3g.rfkill) { |
| bl = !asus_wmi_get_devstate_simple(asus, ASUS_WMI_DEVID_WWAN3G); |
| rfkill_set_sw_state(asus->wwan3g.rfkill, bl); |
| } |
| if (asus->gps.rfkill) { |
| bl = !asus_wmi_get_devstate_simple(asus, ASUS_WMI_DEVID_GPS); |
| rfkill_set_sw_state(asus->gps.rfkill, bl); |
| } |
| if (asus->uwb.rfkill) { |
| bl = !asus_wmi_get_devstate_simple(asus, ASUS_WMI_DEVID_UWB); |
| rfkill_set_sw_state(asus->uwb.rfkill, bl); |
| } |
| if (!IS_ERR_OR_NULL(asus->kbd_led.dev)) |
| kbd_led_update(asus); |
| |
| if (asus_wmi_has_fnlock_key(asus)) |
| asus_wmi_fnlock_update(asus); |
| |
| asus_wmi_tablet_mode_get_state(asus); |
| return 0; |
| } |
| |
| static const struct dev_pm_ops asus_pm_ops = { |
| .thaw = asus_hotk_thaw, |
| .restore = asus_hotk_restore, |
| .resume = asus_hotk_resume, |
| .resume_early = asus_hotk_resume_early, |
| .prepare = asus_hotk_prepare, |
| }; |
| |
| /* Registration ***************************************************************/ |
| |
| static int asus_wmi_probe(struct platform_device *pdev) |
| { |
| struct platform_driver *pdrv = to_platform_driver(pdev->dev.driver); |
| struct asus_wmi_driver *wdrv = to_asus_wmi_driver(pdrv); |
| int ret; |
| |
| if (!wmi_has_guid(ASUS_WMI_MGMT_GUID)) { |
| pr_warn("ASUS Management GUID not found\n"); |
| return -ENODEV; |
| } |
| |
| if (wdrv->event_guid && !wmi_has_guid(wdrv->event_guid)) { |
| pr_warn("ASUS Event GUID not found\n"); |
| return -ENODEV; |
| } |
| |
| if (wdrv->probe) { |
| ret = wdrv->probe(pdev); |
| if (ret) |
| return ret; |
| } |
| |
| return asus_wmi_add(pdev); |
| } |
| |
| static bool used; |
| |
| int __init_or_module asus_wmi_register_driver(struct asus_wmi_driver *driver) |
| { |
| struct platform_driver *platform_driver; |
| struct platform_device *platform_device; |
| |
| if (used) |
| return -EBUSY; |
| |
| platform_driver = &driver->platform_driver; |
| platform_driver->remove_new = asus_wmi_remove; |
| platform_driver->driver.owner = driver->owner; |
| platform_driver->driver.name = driver->name; |
| platform_driver->driver.pm = &asus_pm_ops; |
| |
| platform_device = platform_create_bundle(platform_driver, |
| asus_wmi_probe, |
| NULL, 0, NULL, 0); |
| if (IS_ERR(platform_device)) |
| return PTR_ERR(platform_device); |
| |
| used = true; |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(asus_wmi_register_driver); |
| |
| void asus_wmi_unregister_driver(struct asus_wmi_driver *driver) |
| { |
| platform_device_unregister(driver->platform_device); |
| platform_driver_unregister(&driver->platform_driver); |
| used = false; |
| } |
| EXPORT_SYMBOL_GPL(asus_wmi_unregister_driver); |
| |
| static int __init asus_wmi_init(void) |
| { |
| pr_info("ASUS WMI generic driver loaded\n"); |
| return 0; |
| } |
| |
| static void __exit asus_wmi_exit(void) |
| { |
| pr_info("ASUS WMI generic driver unloaded\n"); |
| } |
| |
| module_init(asus_wmi_init); |
| module_exit(asus_wmi_exit); |